Date post: | 28-Jul-2018 |
Category: |
Documents |
Upload: | hoangnguyet |
View: | 222 times |
Download: | 1 times |
IMPACT ANALYTICAL FLAMMABILITY TESTINGTESTS, GUIDELINES, AND SAMPLE REQUIREMENTS
Flame Extension and Flashback Testing (US Guidelines)• CFR Part 16 §1500.45 (Method for Determining Extremely Flammable and Flammable Contents of
Self-pressurized Containers)• Three containers per product, but evaluated once each
Flame Extension and Flashback Testing (Canadian Guidelines)• Consumer Chemicals and Containers Regulations, 2001 (SOR/2001-269), Schedule 1,“Test For
Determining The Flashback And The Length of the Flame Projection of a Flammable Product Enclosed in a Spray Container”.
• Three containers per product, but evaluated once each
U.N. Ignition Distance Testing• UNECE Part III Classification Procedures, Test Methods and Criteria Relating to Class 2, Class 3, Class 4,
Division 5.1, Class 8, and Class 9, Section 31.4• Three containers per product, but evaluated once each
U.N. Enclosed Space Ignition Testing• UNECE Part III Classification Procedures, Test Methods and Criteria Relating to Class 2, Class 3, Class 4,
Division 5.1, Class 8, and Class 9, Section 31.5• Three containers per product, evaluated once each
U.N. Aerosol Foam Flammability Testing• UNECE Part III Classification Procedures, Test Methods and Criteria Relating to Class 2, Class 3, Class 4,
Division 5.1, Class 8, and Class 9, Section 31.6• Four containers per product, evaluate three once each
Flash Point TestingASTM D93• Pensky-Marten FP tester, • at least 100 mL
ASTM D3828• Erdco Rapid Tester (Setaflash)• At least 10 mL
ASTM D56• Tag Closed Cup Tester
(Koehler Tag closed cup tester model K14600)• At least 100 mL
ASTM 1310• (Koehler Tag open cup tester model K15600)• At least 100 mL
This is a list of the most common tests and is not a comprehensive list of all tests Impact Analtyical can provide. Talk to your IA sales representative for further information.