INSTALLATION
MADE GREEN
AGAINST WATER AND WEATHER
WATER IMPERVIOUS DOOR SYSTEM
WAT E R I M P E R V I O U S D O O R S Y S T E M
SUPERIOR
PROTECTION
The makers of ImperiClad composite have received both the Annual EnviroOvation Award from the Department of Natural Resources and the Biennial Green Globe Award from the Department of Natural Resources and Parks.
451 Industrial Parkway Richmond, IN 47374 T: 765.966.0322 F: 765.966.2403 www.home-shield.com
The IMPERICLAD System by Imperial Products
The IMPERICLAD System by Imperial ProductsA Patent-Pending, Integrated Door Jamb and Threshold System Designed to Keep Weather Out and Protect Against Moisture Damage
• ImperiClad door jambs and thresholds are made using recycled
materials to result in less required raw materials and
reduce waste that ends up in landfills.
• The ImperiClad door system is designed for extended life span due to
its durablematerial technologies and solid component construction.
• Unlike wood, ImperiClad composite does not absorb moisture, so it
resists hosting mold and mildew growth.
• Unlike fiberglass, ImperiClad materials can be end-of-life recycled.
• Unlike wood components, ImperiClad components don’t require
chemical wood preservatives or water repellent additives
that can harm the environment.
• With superior thermal energy efficiency, the ImperiClad door system
can help reduce energy loss through your door framing, thus saving
resources and reducing carbon emissons.
©2009 Homeshield, a Quanex Building Products company. ImperiClad is a trademark of Homeshield. MikronWood™ and SuperCap™ are trademarks of Mikron LLC, a Quanex Building Products company. OSI® is a trademark of Henkel Corporation
ImperiClad recommends hiring an OSI certified installer for our
products. Why? Because installations by OSI Certified Installers
using OSI sealants qualify for a 15 Year/$10,000 per door
Warranty. No wood door frame system can match this level
of durability and confidence.
SUPERIOR INSTALLATION ADDS PROTECTION AGAINST THE ELEMENTS
PRE-FABRICATED PARTS SAVE YOU COST
Kitted parts are available in standard door sizes. Head
and jambs are pre-cut, milled and ready to accept
hardware. Thresholds are pre-cut and assembled. Jambs
and head profiles are available in full length lineals to
support your custom sizes.
The IMPERICLAD System by Imperial Products
COMPONENTS
LOW MAINTENANCE
The ImperiClad door system provides a very low maintenance
exterior because of its pre-finished durability. Profiles are
encapsulated with SuperCap, which provides a beautiful
yet durable millwork finish exterior that won’t peel, fade or
warp and unlike aluminum, is impervious to salt air. Dirt
can be easily removed with just mild soap and water. The
SuperCap finish comes in 3 pre-finished colors: White, Almond
and Adobe. Frames are also available in Bronze SRC solar
reflective coating.
As the leader in high performance thresholds, astragals, sweeps
and corner pads, we are committed to the highest quality.
ASTRAGALS
The Triple Seal Astragal by Imperial Products has proven
consistently that it is the highest performing and most
durable astragal available.
WEATHER SEALS
The best thresholds and astragals will only perform to the level
the weather seals allow them. That is why we have developed
the EZ pad, 22 sweep, and the Leading Edge™ corner pad.
THE 5Y THRESHOLD
The best-performing, highest quality, water-impervious
threshold on the market. Available in a full, solid extruded base
and a cost-effective, half-width base.
durability...
FRAME
ENGINEERED MATERIALS AND COMPONENTS COMbINE TO PROvIDE SUPERIOR DOOR SySTEM PERFORMANCE.
The ImperiClad™ door jambs are made of
MikronWood™ - an engineered composite material
formulated from durable, thermoplastic resins and
coated with a tough exterior SuperCap™ to give you
120% more surface hardness and 300 times more
impact resistance than solid wood.*
superior
MORE ENERGY EFFICIENT
Heat loss through the frame of the door is a common
problem with hollow fiberglass or wood door frames.
Because the ImperiClad composite door frame is a solid
thermoplastic material, it outperforms these other frame
materials in energy efficiency.
MOISTURE-PROOF, INSECT-PROOF
ImperiClad composite door jambs will never absorb
moisture, humidity or condensation – so components
can’t rot or deteriorate. Aluminum-clad wood
configurations can’t make this claim. ImperiClad is
also impervious to insect infestation.
*Mikron Material Science lab tests of Surface Hardness (ASTM D2240, Shore D) and Impact Strength (ASTM D4226).
The 5Y is the world’s highest
performing threshold system
(PG40+)
22 Sweep with EZ Pad is
profiled to mate with sill for a superior weather seal
Astragals and frames utilize
Leading-Edge™ corner pads to seal out water
6-9/16”JAMB PROFILE
4-9/16”THRESHOLD PROFILE
4-9/16”JAMB PROFILE
6-9/16”THRESHOLD PROFILE
AvAILAbLE AS IN-SWING
AND OUT-SWING
•
FOR NEW CONSTRUCTION
OR RENOvATION
MikronWood™ composite frame: energy-efficient,
low-maintenance,no-rot, durable
Full perimeter nailing fin for easy
installation
Snap-in brickmold.
No unsightly fasteners needed
ADOBE BRONZEWHITE ALMOND
54% LESS THAN FIBERGLASS
24% LESS THAN WOOD
IMPERICLAD
ENERGY LOSS (Heat Transfer*)
LESS IS BETTER!
* k-Value, NFRC Data
0.74
0.96
1.60
WATER IMPERVIOUS DOOR SYSTEM