Impulse Gas Technology
Who or what is a Paslode?• Founded in the USA in 1935• Set up to service
Packing, Shipping andLoading Devices
• Impulse range used as a cordless nailing system for timber connections
First Fix or Second fix?Framing Nailer
Heavy Duty Nailer
Brad Nailer
Trim Nailer
Finishing Nailer
Builds Structure Cosmetic Finishing
First Fix Second Fix
51 – 90mm
IM65
16 – 64mm
IM65a
32 – 64mm
IM200 (Stapler)
16 – 50mm
IM350+ Nail Range
75x3.1 G+ Improved Driveability
• Green for bright• Purple for GALV-PLUS®• Red for HDG• Yellow for Stainless steel
• D Head 51-90mm• Ringed RG• Smooth ST• Unilock UNI
• PROSTRIP Paper
• Timber Frame• Cladding• Roofing• Studwork, Noggins• Flooring, Decking• Fencing• Shuttering
3.1x63 Roofing Nail (BS EN 5534)3.1x75 Wind Bracing (BS EN 5268)
Series-i - The System!
• No imitations – best on the
market
• Exclusive System
• Fully CE/EC5 compliant
• The only way to ensure
end users meet the
required standards
The next generation of tools
Lithium range:
• Series-i
– IM360Ci Lithium
– PPN35Ci Lithium
• New Trim tool range
– IM65 F16 Lithium
– IM65A F16 Lithium
• ALL weather performance– High performance fuel cell works all year around
from -15°C to +49°C. No need to switch
between summer and winter fuel cells.
• Increased reliability– Extended cleaning intervals = 50,000 shots
(Green/red blinking : tool cleaning flashes after
50,000 shots to indicate it is time to clean the
tool).
• Easy Fuel cell loading
Series-i
IM360Ci
• 360°of Paslode performance
– Power & cold weather
performance of IM90i
– Reliability/Useability of the
IM350+
– Intelligence of the Pulsa 800
• New Series-i NFP’s
IM360Ci
• Start & Go
– Innovative movement sensor
means no battery discharge
when not in use. Provides up
to 25% more shots per charge
than other Lithium tools.
IM360Ci
• Fuel and Battery Gauge
– Easy and fast control of your
battery and fuel cell levels
means you need never be
caught without power on
site, as the tool alerts you
when down to your last 300
shots.
IM360Ci
• Quick Charge, Long Life
Lithium Battery
– Provides up to 7,500 shots
per full charge (1 hour);
6,000 shots in just 30
minutes; 200 shots in just 2
minutes even on the move.
IM360Ci
• Best Power to Weight Ratio
– With 105 Joules (IM350 85)
the IM360Ci provides the best
power to weight ratio tool on
the market.
– 90mm ring shank nails now
are no problem.
IM360Ci
• Best Balanced Tool
– The tool feels like an
extension of your arm due
to the optimal balance
provided by the latest
Paslode gas technology.
IM360Ci
• Aggressive Probe– Improved aggressive probe allows
you to get into tighter angles for
easier and more convenient
working.
• All Weather Performance– High performance fuel cell works all
year around from -15°C to +49°C.
No need to switch between summer
and winter fuel cells.
IM360Ci
• Dual Action Hook– Adjustable dual action hook, works
as both a belt hook and rafter hook,
which can be hung on either side of
the tool.
• Long Life Tool– Extended cleaning intervals, 50,000
shots (light flashes green/red after
50,000 shots to indicate it is time to
clean the tool).
IM360Ci
• Additional Benefits– Easy tool free Depth of Drive adjustment.
– Removable magazine for easy access to jammed nails and for
long magazine version.
– Battery on-off position.
– Soft grip handle.
– Anti-sliding rubber on both sides of the housing.
– Easy Fuel cell loading.
– Same battery & charger as all Paslode Lithium tools.
IM360Ci NFP F&Bs
Paslode Nail Screw
• Paslode high performance NailScrew
• Ability to un-screw and re-fix
• Improved performance Vs. R.Shank
• Multiple Applications
• Decking, Cladding, Fencing,
construction assembly, flooring,
hoardings and many more!
• Backwards compatible with IM90i
Paslode Nail Screw Range
PPN35Ci
• PPN35i– RFID - Smarter gas system
– Lithium battery
– Start & Go
– Increased power
– Lighter
– Fuel & battery gauge
• Series I twist nail NFP’s run
alongside existing NFP’s
PPN35Ci Savings
PPN35Ci
• All Weather
Performance
– High performance
fuel cell works all
year around from -
15°C to +49°C
PPN35Ci
• Dual Action Hook– Adjustable dual action hook, works
as both a belt hook and rafter hook,
which can be hung on either side of
the tool.
• Long Life Tool– Extended cleaning intervals =
50,000 shots (Tool cleaning light
flashes red/green after 50,000 shots
to indicate it is time to clean)
PPN35Ci
– Fast hole locator probe
– Hardened twist nails
– Easy tool free Depth of Drive adjustment.
– Removable magazine for easy access to jammed nails.
– Battery on-off position.
– Soft grip handle.
– Anti-sliding rubber on both sides of the housing.
– Easy Fuel cell loading.
– Same battery & charger as all Paslode Lithium tools.
• IM65/65a Lithium tools
– Same battery as Series-i tools
– 7500 brads per full charge
– Improved Depth adjuster
– Complete range of accessories
– New design of IM65a Lithium
IM65/65a
IM65/65a
• Quick Charge, Long Life Lithium Battery
– Provides up to 7500 shots per full charge (1
hour);
– 6,000 shots in just 30 minutes;
– 200 shots in just 2 min
IM65a
• Improved Line of Sight
– Pin Point accurate finish
• Improved Depth of Drive
– Simple to adjust depth of
drive for the perfect finish
• Innovative open magazine
– Never run out of brads
S16• 19-50mm Galv• Overboarding• Flooring• Fire protection
IM200• 25 or 32mm Stainless Steel• Metal Roofing• Cladding
IM45 GN Tool Multi-Purpose Nailer
IM45 GN Tool Launch
• The only 0° cordless coil nailer
• Lightweight & versatile
• 25-45mm nail range
• Perfect flush finish
• High nail capacity
• Captive gas system
IM45 GN Tool Launch
• Last nail lock out
• Tool free depth adjustment
• Unique collation delivery system
• No-mar rubber tip
• Easi-view nail magazine
IM45 GN Tool Launch
• 125 nail coil capacity enables increased productivity
• Plastic coil – no debris
• Versatile - different types of nail in one collation
• Simple tear off and disposal
IM45 GN Tool Launch
IM45 GN Tool Launch
IM45 GN Tool Launch
IM45 GN Tool Launch
DRYWALL
IM45 GN Tool Launch
IM45 GN Tool Launch
IM45 GN Tool Launch
IM45 GN Tool Launch
IM45 GN Tool Launch
IM45 GN Tool Launch
IM45 GN Tool Launch
• IM45GN kit contains
2 x batteriesChargerOil & CleanerSafety glass, hex wrenchhigh impact carry case& instruction manual
IM45 GN Tool Launch
EC5 Service Classes
SC1 None
SC2 min Fe/Zn 12-ElecGalv 12microns-Galv+ 15microns-HDGV 50 microns
SC3 min Fe/Zn 25-HDGV 50 microns
Cleaning & Servicing
Every 10K cycles strip & clean tool following the pictogram.
Prior to assembly motor & spark operation can be checked.
If fasteners becomes jammed remove all consumables handle/magazine, 2nd fix tools have a clasp that can be opened.
IM350+ 30k Cycles
IM360 / PPN 35Ci 50k Cycles
Health & Safety
BS EN166-F
BS EN352
Ear & Eye protection mandatory for operators & bystanders. Be aware of recoil, especially when working at heights & on
platforms & scaffolding, Do Not Stretch or Over Reach. Be aware of concealed hazards when nailing. Ensure adequate ventilation (internal combustion engine) Take care when working around apertures and edges Keep battery away from metal objects (i.e. pouch of nails)
Paslode Range Accessories
Nail Embedment
10 x diameter (smooth)
8 x diameter (ring shanked)
Spacing/Edge Distance
31 31
3,1 x 90 mm ring shank nail
Minimum 10 x nail diameter when parallel to grain
Paslode 2015
Paslode 2015
Paslode 2015
Product training
Questions ?