Impulse Steam Turbines A dedicated range of equipment to meet any challenges for Oil and Gas, Small Power Generation and Marine applications. Customized offerings deliver optimum product performance GE Oil & Gas Impulse Steam Turbines are based on a modular turbine design that ensures reliability and high performance. The machines are customized using pre-engineered, field-proven stator and rotor components optimized for the specific thermal cycle requirements to provide high efficiency over the entire operating range. Inlet sections are selected from a large array of modules with single or multi-valve configuration to satisfy the needs from the smallest capacities to the largest ones. The turbine exhaust is available with either a radial or axial configuration. The low pressure stages are selected from a large family of three-dimensional stages that have variable or fixed speed capabilities, as required by the needs of the specific application. GE Oil & Gas Industries Served Industrial Power Generation • Combined Cycle • Cogeneration • Waste to Energy • Biomass Solar Power Generation Oil and Gas • Refinery • LPG • Power Generation Boiler Feed Pumps Marine Propulsion & Power Generation Testing Capabilities All GE Oil & Gas steam turbines are thoroughly tested at our facilities before being delivered to our customers. The Florence, Italy test site is equipped with test benches and a complete steam plant with live steam at 50 bar/450°C. The Le Creusot, France test site is equipped with test benches and a steam plant capable of generating steam at 45 bar/450°C. It also features an anechoic chamber for vibration and noise measurements. The Schenectady, NY, US test site is equipped for low pressure stage testing and is a fundamental tool for full validation of all new low pressure stage designs for fixed or variable speed applications. Full Service Capabilities In order to keep machines operating at peak efficiency and performance, GE provides a broad range of value-added services, such as RAM engineering, Conversions, Modifications and Upgrades (CM&Us), repairs, and uprated parts (OEM design and production) for GE and non-GE machines. We also provide remote monitoring and diagnostics, 24/7 technical assistance and field service support, for installation, start-up, commissioning, on-site inspections, overhauls, troubleshooting and emergency repairs. Beyond enhancing output efficiency, increasing performance and improving reliability, our service solutions enable our customers to reduce maintenance costs and comply with environmental regulations.
Transcript
Impulse Steam TurbinesA dedicated range of equipment to meet any challenges for Oil and Gas, Small Power Generation and Marine applications. Customized offerings deliver optimum product performance GE Oil & Gas Impulse Steam Turbines are based on a modular turbine design that ensures reliability and high performance. The machines are customized using pre-engineered, field-proven stator and rotor components optimized for the specific thermal cycle requirements to provide high efficiency over the entire operating range. Inlet sections are selected from a large array of modules with single or multi-valve configuration to satisfy the needs from the smallest capacities to the largest ones. The turbine exhaust is available with either a radial or axial configuration. The low pressure stages are selected from a large family of three-dimensional stages that have variable or fixed speed capabilities, as required by the needs of the specific application.
GE Oil & Gas
Industries ServedIndustrial Power Generation• Combined Cycle• Cogeneration• Waste to Energy• Biomass
Solar Power Generation
Oil and Gas• Refinery • LPG• Power Generation
Boiler Feed Pumps
Marine Propulsion & Power Generation
Testing Capabilities All GE Oil & Gas steam turbines are thoroughly tested at our facilities before being delivered to our customers.The Florence, Italy test site is equipped with test benches and a complete steam plant with live steam at 50 bar/450°C.The Le Creusot, France test site is equipped with test benches and a steam plant capable of generating steam at 45 bar/450°C. It also features an anechoic chamber for vibration and noise measurements.The Schenectady, NY, US test site is equipped for low pressure stage testing and is a fundamental tool for full validation of all new low pressure stage designs for fixed or variable speed applications.
Full Service CapabilitiesIn order to keep machines operating at peak efficiency and performance, GE provides a broad range of value-added services, such as RAM engineering, Conversions, Modifications and Upgrades (CM&Us), repairs, and uprated parts (OEM design and production) for GE and non-GE machines. We also provide remote monitoring and diagnostics, 24/7 technical assistance and field service support, for installation, start-up, commissioning, on-site inspections, overhauls, troubleshooting and emergency repairs. Beyond enhancing output efficiency, increasing performance and improving reliability, our service solutions enable our customers to reduce maintenance costs and comply with environmental regulations.
MP/MC SERIES - Backpressure or Condensing Low-Medium Power Steam Turbines Key Features • Single Flow• Impulse blades• Condensing or Backpressure• Multi valves• Sliding and/or fixed pressure control• Frequent start/stop accepted• Controlled Extraction/Injection by Grid Valve• Axial or Radial (up/down) exhaust• Optimized with Balance of Plant• Base or Foundation mounting• Design meets API 612 requirements
Product Characteristics • Power Rating: up to 40 MW• Speed Range: 3,000 to 12,000 rpm • Rated Steam Max Inlet Conditions:
140 bar (2,030 psi); 540 °C (1,000 °F) • Arrangement: Single casing• Condensing LP stages: up to 17”
Overview MP/MC series Steam Turbines have impulse blades for high reliability and efficiency over a broad range of operating conditions.Used in backpressure or condensing configurations, they cover Oil and Gas and Industrial Power Generation applications up to approximately 40MW.
BOILER FEED PUMPS - MC Steam Turbine for Boiler Feed Pump Applications Key Features • Single Flow• Impulse blades• Single or dual admission• Broad operating speed range• Condensing or Backpressure• Multi valves• Axial or Radial (up/down) exhaust• Base or Foundation mounting• Design meets API 612 requirements
Product Characteristics • Power Rating: up to 30 MW• Rated Steam Conditions – Dual adm.:
280 bar (4,060 psi); 580 °C (1,075 °F) • Rated Steam Conditions – Single adm.:
25 bar (365 psi); 400 °C (750 °F) • Arrangement: Single casing
Overview Boiler Feed Pump Turbines (BFPT), generally of the condensing and multi-valve type (MC series), have impulse blades for high reliability and efficiency and are suitable for operation over a wide speed range. The modular structured design permits a high degree of customization for the main steam turbine-generator unit optimization.
P/C SERIES - Backpressure or Condensing Small Power Steam Turbines Key Features • Single Flow• Impulse blades• Condensing or Backpressure• Single valve• Radial (up/down) exhaust• Base mounting• Design meets API 612 requirements
Product Characteristics • Power Rating: up to 6 MW • Speed Range: 3,000 to 15,000 rpm • Rated Steam Conditions:
110 bar (1,595 psi); 500 °C (930 °F) • Arrangement: Single casing
Overview P/C series Steam Turbines have impulse blades to provide high reliability and efficiency over a broad range of operating conditions. Used in backpressure or condensing configurations, they cover small power services in Oil and Gas and Industrial Power Generation applications.
