In-Groove™ Insert Carbide V-TipRCK-360

This is an Amana Tool proprietary drawing.Warning:

including, without limitation, those with similiar measurements. Failure to adhere to this warning is dangerous and can result in bodily injury or property damage.

16

30°

0.12

In-Groove™ Insert Carbide V-TipRCK-361

This is an Amana Tool proprietary drawing.Warning:

including, without limitation, those with similiar measurements. Failure to adhere to this warning is dangerous and can result in bodily injury or property damage.

0.24

In-Groove™ Insert Carbide V-TipRCK-362

This is an Amana Tool proprietary drawing.Warning:

including, without limitation, those with similiar measurements. Failure to adhere to this warning is dangerous and can result in bodily injury or property damage.

0.50

In-Groove™ Insert Carbide V-TipRCK-363

This is an Amana Tool proprietary drawing.Warning:

including, without limitation, those with similiar measurements. Failure to adhere to this warning is dangerous and can result in bodily injury or property damage.

0.75

In-Groove™ Insert Carbide V-TipRCK-364

This is an Amana Tool proprietary drawing.Warning:

including, without limitation, those with similiar measurements. Failure to adhere to this warning is dangerous and can result in bodily injury or property damage.

1

In-Groove™ Insert Carbide V-TipRCK-366

This is an Amana Tool proprietary drawing.Warning:

including, without limitation, those with similiar measurements. Failure to adhere to this warning is dangerous and can result in bodily injury or property damage.

1.50

In-Groove™ Insert Carbide V-TipRCK-369

This is an Amana Tool proprietary drawing.Warning:

including, without limitation, those with similiar measurements. Failure to adhere to this warning is dangerous and can result in bodily injury or property damage.

2.25

In-Groove™ Insert Carbide V-TipRCK-380

This is an Amana Tool proprietary drawing.Warning:

including, without limitation, those with similiar measurements. Failure to adhere to this warning is dangerous and can result in bodily injury or property damage.

0.12

7.50

60°

In-Groove™ Insert Carbide V-TipRCK-381

This is an Amana Tool proprietary drawing.Warning:

including, without limitation, those with similiar measurements. Failure to adhere to this warning is dangerous and can result in bodily injury or property damage.

0.24

In-Groove™ Insert Carbide V-TipRCK-382

This is an Amana Tool proprietary drawing.Warning:

including, without limitation, those with similiar measurements. Failure to adhere to this warning is dangerous and can result in bodily injury or property damage.

0.50

In-Groove™ Insert Carbide V-TipRCK-383

This is an Amana Tool proprietary drawing.Warning:

including, without limitation, those with similiar measurements. Failure to adhere to this warning is dangerous and can result in bodily injury or property damage.

0.75

In-Groove™ Insert Carbide V-TipRCK-384

This is an Amana Tool proprietary drawing.Warning:

including, without limitation, those with similiar measurements. Failure to adhere to this warning is dangerous and can result in bodily injury or property damage.

1

In-Groove™ Insert Carbide V-TipRCK-385

This is an Amana Tool proprietary drawing.Warning:

including, without limitation, those with similiar measurements. Failure to adhere to this warning is dangerous and can result in bodily injury or property damage.

1.50

In-Groove™ Insert Carbide V-TipRCK-386

This is an Amana Tool proprietary drawing.Warning:

including, without limitation, those with similiar measurements. Failure to adhere to this warning is dangerous and can result in bodily injury or property damage.

2.25

In-Groove™ Insert Carbide V-TipRCK-390

This is an Amana Tool proprietary drawing.Warning:

including, without limitation, those with similiar measurements. Failure to adhere to this warning is dangerous and can result in bodily injury or property damage.

0.12

90°

4

In-Groove™ Insert Carbide V-TipRCK-391

This is an Amana Tool proprietary drawing.Warning:

including, without limitation, those with similiar measurements. Failure to adhere to this warning is dangerous and can result in bodily injury or property damage.

0.24

In-Groove™ Insert Carbide V-TipRCK-392

This is an Amana Tool proprietary drawing.Warning:

including, without limitation, those with similiar measurements. Failure to adhere to this warning is dangerous and can result in bodily injury or property damage.

0.50

In-Groove™ Insert Carbide V-TipRCK-393

This is an Amana Tool proprietary drawing.Warning:

including, without limitation, those with similiar measurements. Failure to adhere to this warning is dangerous and can result in bodily injury or property damage.

1

This is an Amana Tool proprietary drawing.Warning:

including, without limitation, those with similiar measurements. Failure to adhere to this warning is dangerous and can result in bodily injury or property damage.

In-Groove™ Insert CarbideStraight PlungeRCK-400

5

3.20

This is an Amana Tool proprietary drawing.Warning:

including, without limitation, those with similiar measurements. Failure to adhere to this warning is dangerous and can result in bodily injury or property damage.

In-Groove™ Insert CarbideStraight PlungeRCK-402

6

4.76

This is an Amana Tool proprietary drawing.Warning:

including, without limitation, those with similiar measurements. Failure to adhere to this warning is dangerous and can result in bodily injury or property damage.

In-Groove™ Insert CarbideStraight PlungeRCK-404

6.35

7

This is an Amana Tool proprietary drawing.Warning:

including, without limitation, those with similiar measurements. Failure to adhere to this warning is dangerous and can result in bodily injury or property damage.

In-Groove™ Insert CarbideStraight PlungeRCK-406

7.94

8

This is an Amana Tool proprietary drawing.Warning:

including, without limitation, those with similiar measurements. Failure to adhere to this warning is dangerous and can result in bodily injury or property damage.

In-Groove™ Insert CarbideCorner RoundRCK-410

1.60R

1.6

This is an Amana Tool proprietary drawing.Warning:

including, without limitation, those with similiar measurements. Failure to adhere to this warning is dangerous and can result in bodily injury or property damage.

In-Groove™ Insert CarbideCorner RoundRCK-412

2.40R2.4

This is an Amana Tool proprietary drawing.Warning:

including, without limitation, those with similiar measurements. Failure to adhere to this warning is dangerous and can result in bodily injury or property damage.

In-Groove™ Insert CarbideCorner RoundRCK-414

3.20R3.2

This is an Amana Tool proprietary drawing.Warning:

including, without limitation, those with similiar measurements. Failure to adhere to this warning is dangerous and can result in bodily injury or property damage.

In-Groove™ Insert CarbidePoint Round OverRCK-416

This is an Amana Tool proprietary drawing.Warning:

including, without limitation, those with similiar measurements. Failure to adhere to this warning is dangerous and can result in bodily injury or property damage.

In-Groove™ Insert CarbideCore BoxRCK-420

5R

1.6

This is an Amana Tool proprietary drawing.Warning:

including, without limitation, those with similiar measurements. Failure to adhere to this warning is dangerous and can result in bodily injury or property damage.

In-Groove™ Insert CarbideCore BoxRCK-422

6R

2.4

This is an Amana Tool proprietary drawing.Warning:

including, without limitation, those with similiar measurements. Failure to adhere to this warning is dangerous and can result in bodily injury or property damage.

In-Groove™ Insert CarbideCore BoxRCK-424

7R

3.2

This is an Amana Tool proprietary drawing.Warning:

including, without limitation, those with similiar measurements. Failure to adhere to this warning is dangerous and can result in bodily injury or property damage.

In-Groove™ Insert CarbideCore BoxRCK-426

8R

4

This is an Amana Tool proprietary drawing.Warning:

including, without limitation, those with similiar measurements. Failure to adhere to this warning is dangerous and can result in bodily injury or property damage.

In-Groove™ Insert CarbideCut & Quad ChamferRCK-428

This is an Amana Tool proprietary drawing.Warning:

including, without limitation, those with similiar measurements. Failure to adhere to this warning is dangerous and can result in bodily injury or property damage.

In-Groove™ Insert CarbideCut & Quad ChamferRCK-429

This is an Amana Tool proprietary drawing.Warning:

including, without limitation, those with similiar measurements. Failure to adhere to this warning is dangerous and can result in bodily injury or property damage.

In-Groove™ Insert CarbideCut & Quad ChamferRCK-430

This is an Amana Tool proprietary drawing.Warning:

including, without limitation, those with similiar measurements. Failure to adhere to this warning is dangerous and can result in bodily injury or property damage.

In-Groove™ Insert CarbideCut & Quad ChamferRCK-431

This is an Amana Tool proprietary drawing.Warning:

including, without limitation, those with similiar measurements. Failure to adhere to this warning is dangerous and can result in bodily injury or property damage.

In-Groove™ Insert CarbideCut & Quad ChamferRCK-432

This is an Amana Tool proprietary drawing.Warning:

including, without limitation, those with similiar measurements. Failure to adhere to this warning is dangerous and can result in bodily injury or property damage.

In-Groove™ Insert CarbideCut & Quad ChamferRCK-433

This is an Amana Tool proprietary drawing.Warning:

including, without limitation, those with similiar measurements. Failure to adhere to this warning is dangerous and can result in bodily injury or property damage.

In-Groove™ Insert CarbideCut & Quad ChamferRCK-435

This is an Amana Tool proprietary drawing.Warning:

including, without limitation, those with similiar measurements. Failure to adhere to this warning is dangerous and can result in bodily injury or property damage.

In-Groove™ Insert CarbideCut & Quad ChamferRCK-436

This is an Amana Tool proprietary drawing.Warning:

including, without limitation, those with similiar measurements. Failure to adhere to this warning is dangerous and can result in bodily injury or property damage.

In-Groove™ Insert CarbideCut & Quad ChamferRCK-437

This is an Amana Tool proprietary drawing.Warning:

including, without limitation, those with similiar measurements. Failure to adhere to this warning is dangerous and can result in bodily injury or property damage.

In-Groove™ Insert CarbideCut & Quad ChamferRCK-438

This is an Amana Tool proprietary drawing.Warning:

including, without limitation, those with similiar measurements. Failure to adhere to this warning is dangerous and can result in bodily injury or property damage.

In-Groove™ Insert CarbideCut & Quad ChamferRCK-439

This is an Amana Tool proprietary drawing.Warning:

including, without limitation, those with similiar measurements. Failure to adhere to this warning is dangerous and can result in bodily injury or property damage.

In-Groove™ Insert CarbideCut & Quad ChamferRCK-440