The key components of a Personal Fall Protection System can be broken down into three categories. All three must be in place and properly used to provide maximum worker protection. Anchorage Connector Anchorage Connectors are used to join the connecting device to the anchorage point. • Anchorage Connectors include cross-arm straps, beam anchors, D-bolts and hook anchors • An anchorage point or tie-off point is the area that supports the entire weight of the system and might include I-beams, rebar, scaffold structural members or lifelines Body Wear (Harness) Body Wear is the personal protective equipment worn by the worker, such as a full- body harness. When choosing a harness, you have a variety of options, including: D-Ring Location • Center/Back D-Rings are found on every harness and are the only connective point allowed for fall arrest scenarios • Side D-Rings are commonly used for positioning applications when workers need their hands free during certain work functions • Chest D-Rings are used for positioning work, such as ladder climbing application • Shoulder D-Rings are commonly used for lowering workers into tight confined spaces Buckle Style • Mating Buckles are the most common buckle style used by workers who do not share their harness • Tongue Buckles are similar to a standard belt buckle. This type of buckle is ideal for those who share their harness. Material is generally a little thicker and stiffer in the tongue buckle area. • Friction Buckles or Parachutes Buckles are easy to adjust between various work- ers. Simply step into the leg holes and pull the straps tight. • Quick Connect Buckles cannot accidentally disengage while the harness is worn. Most workers find this specialty buckle easy to attach/detach. Harness Material • Nylon provides excellent strength and comfort • Polyester provides excellent chemical resistance in harsh environments • DuraFlex is a combination synthetic nylon, polyester and specially formulated elas- tomer webbing that will stretch slightly when an employee walks and bends • Nomex/Kevlar is flame-retardant and is commonly used in welding situations Connecting Device Connecting Devices are the critical link which joins the body wear to the anchorage connector. • Connecting Devices include shock-absorbing lanyards, self-retracting lifelines, rope and grabs In This Section Fall Protection The ABC’s of Fall Protection Quick Connect Buckle Friction Buckle Mating Buckle Tongue Buckle In This Section Harnesses . . . . . . . . . . . . . 248-254 Lanyards . . . . . . . . . . . . . . 255-259 Self-Retracting Lifelines. . . 260-261 Ropes/Ladders . . . . . . . . . . . . . 262 Anchors . . . . . . . . . . . . . . . 263-265 Carabiners . . . . . . . . . . . . . . . . 265 Protective Caps . . . . . . . . . . . . 266 247 All our Harnesses and Lanyards are non-returnable, without prior approval from the manufacturer. www.mathesongas.com • 877-684-4427
Transcript
The key components of a Personal Fall Protection System can be broken down intothree categories. All three must be in place and properly used to provide maximumworker protection.
Anchorage Connector
Anchorage Connectors are used to join the connectingdevice to the anchorage point.• Anchorage Connectors include cross-arm straps, beam
anchors, D-bolts and hook anchors• An anchorage point or tie-off point is the area that
supports the entire weight of the system and mightinclude I-beams, rebar, scaffold structural members or lifelines
Body Wear (Harness)
Body Wear is the personal protective equipment worn by the worker, such as a full-body harness. When choosing a harness, you have a variety of options, including:
D-Ring Location• Center/Back D-Rings are found on every harness and are the only connective
point allowed for fall arrest scenarios• Side D-Rings are commonly used for positioning applications when workers need
their hands free during certain work functions• Chest D-Rings are used for positioning work, such as ladder climbing application• Shoulder D-Rings are commonly used for lowering workers into tight
confined spaces
Buckle Style• Mating Buckles are the most common buckle style used by workers who do not
share their harness• Tongue Buckles are similar to a standard belt buckle. This type of buckle is ideal
for those who share their harness. Material is generally a little thicker and stiffer inthe tongue buckle area.
• Friction Buckles or Parachutes Buckles are easy to adjust between various work-ers. Simply step into the leg holes and pull the straps tight.
• Quick Connect Buckles cannot accidentally disengage while the harness isworn. Most workers find this specialty buckle easy to attach/detach.
Harness Material• Nylon provides excellent strength and comfort• Polyester provides excellent chemical resistance in harsh environments• DuraFlex is a combination synthetic nylon, polyester and specially formulated elas-
tomer webbing that will stretch slightly when an employee walks and bends• Nomex/Kevlar is flame-retardant and is commonly used in welding situations
Connecting Device
Connecting Devices are the critical link which joins the body wear to the anchorage connector. • Connecting Devices include shock-absorbing lanyards,
All our Harnesses and Lanyardsare non-returnable, without priorapproval from the manufacturer.
www.mathesongas.com • 877-684-4427
• Miller HP 650 Full Body Harnesses are available in Lightweightand Heavy-Duty styles for all of your general construction applications. Standard features include: strap keepers, extra-longleg and sub-pelvic straps, lanyard clip and 4 harness loops forinstalling a tool belt. 88992 comes with a tool belt, waist padsand shoulder pads.
• Miller HP 850 DuraLite Harness is extremely lightweight (justover 2 lbs.) and durable to produce maximum worker mobility.This harness features mating-leg buckles and color-coded straps.Strong nylon webbing ensure long life.
• Miller Titan Harnesses provide “Titanic” fall protection for themost rigorous work environments. Non-slip chest strap assures aproper fit and the sub-pelvic strap provides added safety andsupport. The T-Flex™ Stretchable Harness features a stretchablewebbing that moves with you to produce greater comfort andadded mobility.
• DBI-Sala Vest-Type Full Body Harness is manufactured fromhigh-strength, durable polyester webbing. Color-coded strapsand metal-to-metal mating-type leg buckles allow for easy donning. Harnesses with friction buckle and adjustable tonguebuckle leg straps are extremely durable and lightweight (2.4 and
2.7 lbs. respectively). Harness with shoulder D-rings weighs only3.2 lbs. and provides comfort without limiting mobility. All stylescome with a friction adjuster on lower shoulder straps.
• North Durabilt Harness is universally-sized and constructed with a polyester webbing for greater resistance to chemicals.
• MSA TechnaCurv Full Body Harness features a Curvilineartorso webbing that curves around the neck area to help preventchafing and discomfort. Adjustable Y-back D-locator pad lets youadjust the back D-ring to provide proper harness fit. Shoulderand sub-pelvic straps feature Sorbtek™ fabric, a lightweight material designed to wick moisture away from the body.
• MSA FP Pro Harness is a vest-style harness provides comfort-able, all-day protection with a lightweight design and durablewebbing. Color contrasting torso and leg straps simplify donning.Leg and chest straps feature mating buckles for easy adjustment.
• MSA Workman Harness features lightweight components anddurable webbing, making this vest-style harnesses a comfortableand economical choice. Color-contrasting black thigh and high-visibility yellow torso straps simplify donning. The webretainer collars keep the excess webbing in order.
Standard/Economy HarnessesHarnesses are designed to retain the user in the event of a fall and distribute the impact (fall arrest) forces throughout the thighs, buttocks,chest and shoulders. All styles meet applicable OSHA and ANSI standards.
248
Fall Protection Harnesses
Chest Buckle Leg Buckle D-RingsWeight
Capacity Size 1-2 3+Miller88671 HP 650 Lightweight Full Body Harness Mating Mating Back 400 lbs. Universal $105.75 100.5088672 HP 650 Lightweight Full Body Harness Mating Mating Back, Side 400 lbs. Universal 116.80 111.0088673 HP 650 Heavy-Duty Full Body Harness Mating Tongue Back 400 lbs. Universal 114.45 108.7588674 HP 650 Heavy-Duty Full Body Harness Mating Tongue Back, Side 400 lbs. Universal 127.75 121.4088992 HP 650 Heavy-Duty Full Body Harness Mating Mating Back, Side 400 lbs. Universal 176.25 167.4588628 HP 850 DuraLite Harness Mating Mating Back 400 lbs. Universal 94.65 89.9588201 Titan T-Flex Harness Mating Tongue Back, Side 310 lbs. Universal 107.20 101.8588202 Titan T-Flex Harness Mating Mating Back 310 lbs. Universal 82.85 78.7588203 Titan Non-Stretch Harness Mating Mating Back 310 lbs. Universal 57.25 54.4088204 Titan Non-Stretch Harness Mating Tongue Back, Side 310 lbs. Universal 75.50 71.75
DBI-Sala41001 Vest-Type Full Body Harness Mating Mating Back 420 lbs. Universal 109.05 103.6041000 Vest-Type Full Body Harness Mating Friction Back 420 lbs. Universal 110.95 105.4541002 Vest-Type Full Body Harness Mating Tongue Back 420 lbs. Universal 114.55 108.8541004 Vest-Type Full Body Harness Mating Tongue Back, Shoulder 420 lbs. Universal 133.40 126.75
MSA88839 TechnaCurv Full Body Harness Mating Tongue Back 400 lbs. Universal 124.00 117.8088704 FP Pro Harness Mating Mating Back 360 lbs. Universal 66.95 63.6510365 Workman Harness Mating Mating Back 400 lbs. X-Small 44.40 42.2010366 Workman Harness Mating Mating Back 400 lbs. Small – Large 45.10 42.8510367 Workman Harness Mating Mating Back 400 lbs. X-Large 46.95 44.6510368 Workman Harness Mating Mating Back 400 lbs. XX-Large 48.40 46.0010369 Workman Harness Mating Mating Back, Side 400 lbs. X-Small 52.40 49.8010370 Workman Harness Mating Mating Back, Side 400 lbs. Small – Large 54.35 51.6510371 Workman Harness Mating Mating Back, Side 400 lbs. X-Large 55.80 53.0510372 Workman Harness Mating Mating Back, Side 400 lbs. XX-Large 56.35 53.5510373 Workman Harness Mating Tongue Back 400 lbs. X-Small 54.85 52.1510374 Workman Harness Mating Tongue Back 400 lbs. Small – Large 56.55 53.7510375 Workman Harness Mating Tongue Back 400 lbs. X-Large 57.90 55.0510376 Workman Harness Mating Tongue Back 400 lbs. XX-Large 59.35 56.4010377 Workman Harness Mating Tongue Back, Side 400 lbs. X-Small 62.30 59.2010378 Workman Harness Mating Tongue Back, Side 400 lbs. Small – Large 63.60 60.4510379 Workman Harness Mating Tongue Back, Side 400 lbs. X-Large 65.20 61.9510380 Workman Harness Mating Tongue Back, Side 400 lbs. XX-Large 66.75 63.45
www.mathesongas.com • 877-684-4427
Harnesses Fall Protection
249
DBI-Sala® Vest-Type Full Body Harnesswith Mating Buckle Leg Straps
DBI-Sala® Vest-Type Full Body Harnesswith Friction Buckle Leg Straps
DBI-Sala® Vest-Type Full Body Harnesswith Tongue Buckle Leg Straps
Miller® HP 650 Lightweight Full Body Harness
Miller® HP 850 DuraLite™ Harness Miller® Titan™ Harness
North® Durabilt Harness MSA® TechnaCurv™ Full Body Harness
MSA® FP Pro™ Harness MSA® Workman™ Harnesses
DBI-SalaHarnesses are
universally sizedto fit most work-
ers up to 6'3"tall, 250 lbs.
Miller Harnessesare universally
sized to fit mostwaists from 36" – 52".
www.mathesongas.com • 877-684-4427
• Miller Revolution Harness features an ErgoArmor™ back shieldthat minimizes impact from sharp and heavy snap hooks and lifelines. The integrated accessory system provides a PivotLink™connection for belts, tools and accessories. The torso cam buckle allows for one-handed release and simultaneous adjust-ment of the shoulder straps. DualTech™ Webbing offers a soft,textured inside and a durable, chemical-resistant outer material.DuraFlex® Webbing is constructed of a patented elastomer that isspecially formulated to stretch.
• DBI-Sala Exofit Construction and Tower Climbing Harnessesprovides the ultimate in no-tangle donning and security. Simplyput the ExoFit on, adjust the straps and the harness remembersthe adjustment. The cushioned shoulder pads are built-in, sothey won’t slip or slide and the cushioned leg, hip and seatstraps provide additional security during a fall. Breathable Dri-lex®
lining draws moisture away to keep you dry and comfortable.Tower Climbing Harness offers the added features of a chest D-ring, a belt with side D-rings and a seat sling with D-rings.
• DBI-Sala Exofit XP Harness wraps around the wearer for no-tangle donning and comfortable security. The 5-point adjust-ment system provides a perfect fit every time. The spring-loadedback D-ring “stands up” to ensure an easy connection. Back D-ring also features a built-in impact indicator. The quick connectbuckles are color coded for easier donning. The padding isremovable and washable.
• MSA TechnaCurv Full Body Harness features a Curvilineartorso webbing that curves around the neck area to help preventchafing and discomfort. Adjustable Y-back D-locator pad lets youadjust the back D-ring to provide proper harness fit. Shoulderand sub-pelvic straps feature Sorbtek™ fabric, a lightweight material designed to wick moisture away from the body.
• North Rite-On Harness is designed to hold its shape and provide all-day comfort. The harness is constructed with a comfortable shoulder pad to make donning a breeze and eliminate the tangling of straps. Unit features D-ring on the back.
Premium Padded HarnessesPremium Padded Harnesses are easier to put on and more comfortable to wear. Choose frommodels with a wide variety of padding and D-ring locations. Quick connect leg buckles allowfor single-handed operation and easy adjustments. All styles meet applicable OSHA and ANSI standards.
Miller88283 Revolution Harness with DualTech Webbing Quick Connect Back Back 400 lbs. Universal $242.25 230.1588284 Revolution Harness with DuraFlex Webbing Quick Connect Back Back 400 lbs. Universal 242.25 230.15
DBI-Sala24056 Exofit Construction Harness Quick Connect Back Shoulder, Legs 420 lbs. Medium, 36" – 44" Waist 249.50 237.0524057 Exofit Construction Harness Quick Connect Back Shoulder, Legs 420 lbs. Large, 40" – 48" Waist 249.50 237.0588658 Exofit Tower Climbing Harness Quick Connect Back, Side, Chest Shoulder, Legs 420 lbs. Medium, 36" – 44" Waist 453.20 430.5588657 Exofit Tower Climbing Harness Quick Connect Back, Side, Chest Shoulder, Legs 420 lbs. Large, 40" – 48" Waist 453.20 430.5588251 Exofit XP Harness Quick Connect Back Shoulder, Legs 420 lbs. Medium, 36" – 44" Waist 275.60 261.8588252 Exofit XP Harness Quick Connect Back Shoulder, Legs 420 lbs. Large, 40" – 48" Waist 275.60 261.8588253 Exofit XP Harness Quick Connect Back, Side Shoulder, Legs 420 lbs. Medium, 36" – 44" Waist 302.35 287.2588254 Exofit XP Harness Quick Connect Back, Side Shoulder, Legs 420 lbs. Large, 40" – 48" Waist 302.35 287.25
MSA88837 TechnaCurv Full Body Harness Quick Connect Back Shoulder 400 lbs. Universal 232.55 220.9588838 TechnaCurv Full Body Harness Quick Connect Back Shoulder, Sub-Pelvic 400 lbs. Universal 224.10 212.9088840 TechnaCurv Full Body Harness Mating Back, Side, Chest Shoulder, Sub-Pelvic 400 lbs. Universal 227.35 216.00
• MSA TechnaCurv Pickers’ Harness has all the same features as the TechnaCurv Harness – Curvilinear torso webbing and lightweight shoulder and sub-pelvic straps – plus an 18" integraldorsal D-extension with Velcro closure provides easy access tothe back D-ring.
• North Heavy-Duty Harness features an extended back D-Ringand integrated lanyard that is adjustable from 4' – 6'. This modelis constructed of 2" polyester webbing.
• North Rite-On Harness is designed to hold its shape and provide all-day comfort. The harness is constructed with a comfortable shoulder pad to make donning a breeze and eliminate the tangling of straps. Quick connectors allow you toconnect in a single action. Unit features D-ring on the back with18" extender.
Harnesses with an Extended Back D-RingHarnesses with an Extended Back D-Ring makes lanyard attachment easier andallows for inspection of the snap hook closure. All styles meet applicable OSHA andANSI standards.
Lanyard ExtenderThis 18" lanyard extension makes attaching a lanyard toa back D-Ring on a harness much easier. Unit has asnaphook at one end and a D-Ring on the other end.
• Miller Revolution Construction Harness features an integratedback and shoulder pads to provide all-day comfort and a stand-up D-ring with fall indicator for greater worker safety. The integrated accessory system provides a PivotLink™connection for belts, tools and accessories. The torso cam buckle allows for one-handed release and simultaneous adjustment of the shoulder straps. Type 10 webbing is twice as strong as standards require to provide longer service life.
• Miller Heavy-Duty Harness holds up during the most demanding jobs, including confined space activities. Harness features a heavy-duty nylon webbing and tongue-bucklestraps throughout.
• Miller DuraFlex Four D-Ring Harness conforms to the shape of the worker, stretching with every movement, so there is nobunching, binding or kinking.
• DBI-Sala Exofit Construction Harness provides the ultimate in no-tangle donning and security. Simply put the ExoFit on,adjust the straps and the harness remembers the adjustment.The cushioned shoulder pads are built-in, so they won’t slip orslide and the cushioned leg, hip and seat straps provide additional security during a fall. Breathable Dri-lex® lining drawsmoisture away to keep you dry and comfortable.
• DBI-Sala Construction Vest Style Harness is constructed usingDelta No-Tangle™ design to provide added comfort, increasedproductivity and improved safety for everyone. Friction buckleson the lower shoulder straps and tongue buckle leg straps makethis harness easy to don. Sewn-in back and shoulder pads produce added comfort.
• DBI-Sala Full Body Crossover Style Harness is manufacturedfrom high-strength, durable polyester webbing. Front and side D-rings make ladder climbing or positioning easy. Back D-ring for fall protection. Color-coded straps and metal-to-metal mating-type leg buckles make donning easy. Unit weighs only 3.2 lbs.
• MSA TechnaCurv Construction Harness features a Curvilineartorso webbing that curves around the neck area to help preventchafing and discomfort. Adjustable Y-back D-locator pad lets youadjust the back D-ring to provide proper harness fit. Shoulderand sub-pelvic straps feature Sorbtek™ fabric, a lightweightmaterial designed to wick moisture away from the body. Modelwithout belt does have belt loops, giving you the flexibility to addany belt of your choice. Model with belt includes a back pad forsuperior comfort.
• MSA Workman Construction Harness is comfortable fall protection that’s easy to use. The integral back pad comes with a removable tongue buckle tool belt. Choose from models withor without shoulder pads.
• Guardian Seraph Construction Harness with Belt featuresstretchability in the shoulders and back, quick-adjust torso buckles, tongue buckle leg straps, shoulder pads and a sub-pelvic strap. This model features six points of adjustment, D-ring lanyard keepers that double as retrieval hoists, a paddedwaist belt and side D-rings.
Construction HarnessesConstruction Harnesses are specifically designed to meet the challenges found on construction sites. Typical additional features mayinclude a belt and/or padding in the back, shoulders and waist. All styles meet applicable OSHA and ANSI standards.
252
Fall Protection Harnesses
Chest Buckle Leg Buckle D-Rings PaddingWeight
Capacity Size 1-2 3+Miller10490 Revolution Construction Harness Mating Mating Back Back, Shoulder 400 lbs. Universal $174.85 166.1510491 Revolution Construction Harness Mating Tongue Back Back, Shoulder 400 lbs. Universal 187.75 178.4010492 Revolution Construction Harness with Belt Mating Mating Back, Side Back, Shoulder, Waist 400 lbs. Universal 245.45 233.2010493 Revolution Construction Harness with Belt Mating Tongue Back, Side Back, Shoulder, Waist 400 lbs. Universal 279.80 265.8548072 Heavy-Duty Harness — Tongue Back — 400 lbs. Small, 32" – 36" Waist 215.25 204.5048073 Heavy-Duty Harness — Tongue Back — 400 lbs. Medium, 36" – 44" Waist 215.25 204.5048074 Heavy-Duty Harness — Tongue Back — 400 lbs. Large, 42" – 46" Waist 215.25 204.5048075 Heavy-Duty Harness — Tongue Back — 400 lbs. X-Large, 44" – 52" Waist 215.25 204.5075351 DuraFlex Four D-Ring Harness — Mating Back, Side, Chest — 400 lbs. Universal 128.00 121.60
DBI-Sala24056 Exofit Construction Harness Quick Connect Quick Connect Back Shoulder, Legs 420 lbs. Medium, 36" – 44" Waist 249.50 237.0524057 Exofit Construction Harness Quick Connect Quick Connect Back Shoulder, Legs 420 lbs. Large, 40" – 48" Waist 249.50 237.0588771 Construction Vest Style Harness Mating Tongue Back, Side Back, Shoulder 420 lbs. Small, 32" – 40" Waist 188.20 178.8088770 Construction Vest Style Harness Mating Tongue Back, Side Back, Shoulder 420 lbs. Medium, 36" – 44" Waist 188.20 178.8088769 Construction Vest Style Harness Mating Tongue Back, Side Back, Shoulder 420 lbs. Large, 40" – 48" Waist 188.20 178.8041003 Full Body Crossover Harness — Mating Back, Side, Front — 420 lbs. Universal 128.60 122.20
MSA88261 TechnaCurv Construction Harness Mating Tongue Back, Side Shoulder 400 lbs. Universal 180.65 171.6588262 TechnaCurv Construction Harness with Belt Quick Connect Tongue Back, Side Back, Shoulder 400 lbs. Universal 273.40 259.7514514 Workman Construction Harness Mating Tongue Back, Side Back, Shoulder 400 lbs. X-Small 110.55 105.0514515 Workman Construction Harness Mating Tongue Back, Side Back, Shoulder 400 lbs. Small – Large 132.95 126.3514516 Workman Construction Harness Mating Tongue Back, Side Back, Shoulder 400 lbs. X-Large 135.70 128.9514517 Workman Construction Harness Mating Tongue Back, Side Back, Shoulder 400 lbs. XX-Large 139.70 132.7514510 Workman Construction Harness Mating Tongue Back, Side Back 400 lbs. X-Small 120.45 114.4514511 Workman Construction Harness Mating Tongue Back, Side Back 400 lbs. Small – Large 128.00 121.6014512 Workman Construction Harness Mating Tongue Back, Side Back 400 lbs. X-Large 131.40 124.8514513 Workman Construction Harness Mating Tongue Back, Side Back 400 lbs. XX-Large 133.80 127.15
Guardian11873 Seraph Construction Harness Mating Tongue Back, Side Shoulder, Waist 310 lbs. Medium/Large 139.05 132.1011874 Seraph Construction Harness Mating Tongue Back, Side Shoulder, Waist 310 lbs. X-Large/XX-Large 145.25 138.00
www.mathesongas.com • 877-684-4427
Harnesses Fall Protection
253
Miller® Revolution™ ConstructionHarness with Tongue Leg Buckle
Miller® Revolution™ ConstructionHarness with Belt and Mating Leg Buckle
DBI-Sala® Exofit™ Construction Harness
Guardian® Seraph Construction HarnessMSA® TechnaCurv™ Construction Harness MSA® Workman™ Construction Harness
DBI-Sala® Construction Vest Style Harness
DBI-Sala® Full Body Crossover Harness
Miller® Heavy-Duty Harness Miller® DuraFlex® Four D-Ring Harness
www.mathesongas.com • 877-684-4427
• DuraFlex Python Harness features shoulder straps that are con-structed of a cushioned, tubular webbing to reduce stress on theneck and shoulders. The lower torso straps are made of DuraFlexstretchable webbing and the leg straps are made of non-stretchwebbing. This combination produces greater flexibility with feweradjustments and allows the harness to hold its shape for easydonning. Harness also features a non-slip adjustable chest strap,sliding back D-ring and pads, a back strap and adjustable lan-yard rings.
• DuraFlex Python Ultra Harness offers the added features of a comfort touch back pad and quick connect chest and leg buckles.
• DuraFlex E850 Harness features a sliding back D-ring and friction-buckle shoulder and mating-buckle leg straps.
• DuraFlex E851 Harness is the same as the E850, with the addedfeatures of side D-rings.
• DuraFlex Four D-Ring Harness feature standard chest, side andback D-rings.
• Miller Titan Harness provides “Titanic” fall protection for themost rigorous work environments. Non-slip chest strap assures aproper fit and the sub-pelvic strap provides added safety andsupport. The T-Flex™ Stretchable Harness features a stretchablewebbing that moves with you to produce greater comfort andadded mobility.
Stretch HarnessesMiller Stretch Harnesses conform to the shape of the worker, stretching with every movement, so there is no bunching, binding or kinking. Because these harnesses arestretchable, the worker has greater mobility with less fatigue. All are universally sized tofit most waists from 36" – 52". All styles meet applicable OSHA and ANSI standards.
• Miller SofStop Shock-Absorbing Lanyards greatly reduce fallarrest forces. The inner core extends up to a maximum of 31⁄2’ toallow a soft, stable stop.
• Miller Titan Shock-Absorbing Lanyard is constructed of adurable polyester webbing that expands up to 31⁄2' to reduce fallarrest forces. Lanyard includes a shock absorber pack as an integral part of the standard lanyard and a back-up safety strapthat deploys for added fall protection.
• DBI-Sala EZ Stop Shock-Absorbing Lanyards are specificallydesigned to reduce fall arrest forces placed on a worker in a fall.Vinyl-Coated Steel Cable Lanyard is ideal for harsh environ-ments and is the ultimate durability and longevity. Lanyard limitsarrest forces to 900 lbs. or less. Lanyard limits arrest forces to900 lbs. or less.
• North Shock-Absorbing Lanyard is manufactured from 13⁄4" polywebbing with double-locking snaps.
• Guardian Monster Edge Heavy-Duty Shock AbsorbingLanyard offers a reinforced webbing for added protection fromfraying when running along a beam edge. This specially woven webbing has a tensile strength of over 10,000 pounds. Double-wide shock pack keeps impact forces below industry standards.
• MSA Workman Shock-Absorbing Lanyard is lightweight with a low-profile body. The shock absorber includes a clear protective cover over the labels to increase service life and allowfor easy inspection. Tear-tape design keeps fall arrest forcesbelow 900 lbs.
Pack Style Shock-Absorbing LanyardsPack Style Lanyards feature a shock absorber pack that utilizes a controlled tearing action when subjected to fall arrest forces. All meetapplicable OSHA and ANSI standards.
• Miller Manyard Shock-Absorbing Lanyards reduce fall arrestforces by 50-80%. Manyard’s inner core extends to slow aworker’s descent. Pop-out warning flag indicates the lanyardshould be removed from service.
• Miller Titan Shock-Absorbing Lanyard is constructed of adurable polyester webbing that expands up to 31⁄2' to reduce fallarrest forces. Lanyard features a built-in inner woven core and anouter jacket that serves as a back-up web lanyard.
• DBI-Sala EZ Stop Shock-Absorbing Lanyards are specificallydesigned to reduce fall arrest forces placed on a worker in a fall.Web loop lanyard design allows reduced lanyard weight andreduces electrical conductivity. Lanyard limits fall arrest forces to900 lbs. or less.
• North Shock-Absorbing Lanyard features double-locking snap-hook connectors on both ends.
Tubular Shock-Absorbing LanyardsTubular Lanyards feature an internal core that expands to reduce fall arrest forces. All meet applicable OSHA and ANSI standards.
EZ Stop® Retrax™Shock-Absorbing LanyardThe EZ Stop Retrax adjusts automatically to fit the working area. Unit retracts and expandssmoothly and consistently from 21⁄2' – 6'. The retraction keeps the lanyard taut and close to the body at all times, reducing trip fall hazards, snagging on equipment and dragging. Unitconsists of a two snap hooks, shock type pack, tough polyester webbing and a polycarbonatethermoplastic retractor case. When subjected to fall arrest forces, a unique tearing action limitsthe maximum arresting force to 900 lbs. Meets applicable OSHA and ANSI standards.
Stretchable Shock-Absorbing LanyardsTired of tripping over and snagging traditional lanyards? These lanyards can be stretched and adjusted so they stay taut and close to thebody at all times, reducing trip fall hazards, snagging on equipment and dragging. Adjusting your lanyard to as short a length as possiblewill limit fall-arresting forces. All meet applicable OSHA and ANSI standards.
Miller® Manyard® II Shock-Absorbing Lanyards DBI-Sala® Shockwave™ Lanyards
MSA® Workman™ Shock-Absorbing Lanyard
MSA® Expanyard™ Shock-Absorbing Lanyard
MSA® Diamond™ Shock-Absorbing Lanyard
Miller® SofStop® Shock-Absorbing Lanyard DBI-Sala® EZ Stop® Retrax Shock-Absorbing Lanyard
• Miller Manyard II Shock-Absorbing Lanyards use a stretchabledesign for extra comfort and safety. This 6' lanyard contracts to alength of 4' which reduces the chance of tripping, snagging ordragging. Shock-absorbing design reduces fall arrest forces by50-80%. Inner lanyard core features a bright red color making itvisible if damaged.
• Miller SofStop Shock-Absorbing Lanyard greatly reduces fallarrest forces. The inner core extends up to a maximum of 31⁄2' toallow a soft, stable stop.
• DBI-Sala Shockwave Shock-Absorbing Lanyards feature aninternal elastic band that automatically extends to 6' and contractsdown to approximately 41⁄2'. Web Loop Lanyard features a sewnweb loop D-ring for reduced weight and reduced electrical conductivity.
• DBI-Sala EZ Stop Retrax Shock-Absorbing Lanyard adjustsautomatically to fit the working area. Unit retracts and expandssmoothly and consistently from 21⁄2' – 6'. The retraction keeps thelanyard taut and close to the body at all times, reducing trip fall
hazards, snagging on equipment and dragging. Unit consists of atwo snap hooks, shock type pack, tough polyester webbing and apolycarbonate thermoplastic retractor case. When subjected to fallarrest forces, a unique tearing action limits the maximum arrestingforce to 900 lbs.
• MSA Diamond Shock-Absorbing Lanyard offers a full 6' range of motion when in use and contracts to 41⁄2' when not in use toreduce trip and snag hazards. A pouchless design makes this lanyard lighter and more comfortable to wear. Durable polyesterconstruction produces abrasion and UV resistance. Unit keeps fall arrest forces below 900 lbs.
• MSA Expanyard Shock-Absorbing Lanyard stays closer to theuser’s body, reducing the possibility of trips and snags.
• MSA Workman Shock-Absorbing Lanyard is lightweight with alow-profile body. The shock absorber includes a clear protectivecover over the labels to increase service life and allow for easyinspection. Tear-tape design keeps fall arrest forces below 900 lbs.
• Miller BackBiter Tie-Back Lanyard has a 5K™ snap hook thatprovides 5,000 lb. capacity at every angle. Cordura® nylon webbing provides five times more abrasion resistance, so it canbe tied off on rough surfaces.
• Miller SofStop Shock-Absorbing Lanyards greatly reduce fallarrest forces. The inner core extends up to a maximum of 31⁄2' toallow a soft, stable stop.
• Miller Manyard Shock-Absorbing Lanyards reduce fall arrestforces by 50-80%. Manyard’s inner core extends to slow descent.Pop-out warning flag indicates the lanyard should be removedfrom service.
• Miller Titan Shock-Absorbing Lanyard is constructed of adurable polyester webbing that expands up to 31⁄2' to reduce fallarrest forces. Lanyard features a built-in inner woven core and anouter jacket that serves as a back-up web lanyard.
• DBI-Sala Shockwave Shock-Absorbing Lanyards feature an internal elastic band that automatically extends to 6’ and contracts down to approximately 41⁄2’. Web Loop Lanyardfeatures a sewn web loop D-ring for reduced weight and reducedelectrical conductivity.
• MSA Diamond Shock-Absorbing Lanyard offers a full 6' rangeof motion when in use and contracts to 41⁄2' when not in use toreduce trip and snag hazards. A pouchless design makes thislanyard lighter and more comfortable to wear.
• MSA Expanyard Shock-Absorbing Lanyard stays closer to theuser’s body, reducing the possibility of trips and snags.
• MSA Workman Shock-Absorbing Lanyards are lightweightwith a low-profile body. The shock absorber includes a clear protective cover over the labels to allow for easy inspection.
• Guardian Monster Edge Heavy-Duty Shock AbsorbingLanyards offer a reinforced webbing for added protection from fraying when running along a beam edge. This speciallywoven webbing has a tensile strength of over 10,000 pounds.Double-wide shock pack keeps impact forces below industrystandards. Double Lock Wrap Lanyard has the ability to adjustin length, providing versatility and efficiency. The carabinerreduces the possibility of roll out.
Double-Leg/100% Tie-Off Shock-Absorbing LanyardsDouble-Legged Lanyards are used to provide 100% tie-off. These lanyards allow you to stay protected and connected as you move fromone location to another. All meet applicable OSHA and ANSI standards.
www.mathesongas.com • 877-684-4427
Rope and Webbing LanyardsRope Lanyards are manufactured from durable spun nylon rope to assure quality and strength. Webbing Lanyardsfeature nylon webbing for maximum durability. AdjustableLanyards allow workers to set the lanyard length from 3.6' – 4'based on the work environment. All have a weight capacity of310 lbs. Meets applicable OSHA and ANSI standards.
E FA B C
• Miller BackBiter Tie-Back Lanyards have a 5K™ snap hook that provides 5,000 lb. capacity at every angle. Cordura® nylonwebbing provides five times more abrasion resistance, so it canbe tied off on rough surfaces. SofStop™ shock absorber reducesfall arresting forces.
• DBI-Sala EZ Stop Tie-Back Lanyard connects back to itselfaround an anchor point. Unit features 1" polyester webbing, 2 snap hooks and an adjustable D-ring in the middle.
• Guardian Monster Edge Shock Absorbing Lanyards offer areinforced webbing for added protection from fraying when
running along a beam edge. This specially woven webbing has atensile strength of over 10,000 pounds. Double-wide shock packkeeps impact forces below industry standards. Double LockWrap Shock-Absorbing Lanyard has the ability to adjust in length,providing versatility and efficiency. The carabiner reduces thepossibility of roll out.
• MSA Workman Tie-Back Lanyards are lightweight with a low-profile body. The shock absorber includes a clear protectivecover over the labels to increase service life and allow for easyinspection. Tear-tape design keeps fall arrest forces below 900lbs. Lanyards can be adjusted from 4' – 6'.
Tie-Back Shock-Absorbing LanyardsDon’t tie back with regular lanyards, choose a lanyard designed exclusively for tie-back use. All meet applicable OSHA and ANSI standards.
Economy/Disposable Self-Retracting LifelinesSelf-Retracting Lifelines feed out either cable or webbing, then retract automatically as the worker gets closer to the device. These units pre-vent excessive free fall distances and decrease the chances of injury during a fall. These economy models are considered disposable andshould be immediately discarded if they are involved in a fall. All styles require no annual factory certification and meet applicable OSHAand ANSI standards.
MSA® Short-Stop®
Self-RetractingLanyard
Miller® Titan™ Fall Limiter
Miller® Scorpion™ Fall Limiter
Miller® RetractableWebbing Lanyard
MSA® Workman Fall Limiter
DBI-Sala® Rebel™Self-RetractingLifeline
Guardian® Self-Retracting Lifeline
• Miller Retractable Webbing Lanyard provides security and full range of movement because it’s designed to automaticallylock-up when a fall is sensed. Swivel shackle includes a carabiner for attachment to an anchor point, while 3⁄4" lockingsnap attaches to a full body harness.
• Miller Scorpion Fall Limiters require less clearance, offersgreater mobility and prevents tripping hazards when compared to other shock-absorbing lanyards. The quick-activating stainless-steel breaking system arrests free falls within inches. 9' workinglength improves mobility.
• Miller Titan Fall Limiters reduce free falls to inches with theirquick-activating stainless-steel breaking system. The workinglength of the limiter is 11', so you get an additional 5' of mobilityover a traditional 6' shock-absorbing lanyard. Unit features a thermoplastic housing and 1” polyester webbing.
• DBI-Sala Rebel Self-Retracting Lifeline is the first economy 11' self-retracting lifeline on the market that doesn’t compromiseperformance or safety. Unit delivers the best lifeline
length-to-weight ratio in the industry. The rugged aluminum hous-ing and stainless steel working components can withstand roughuse, yet weigh only 2.8 lbs.
• MSA Short-Stop Self-Retracting Lanyard is a fast-acting fallarrester that provides all the mobility you need. Lanyard is idealfor climbing applications where vertical mobility is required. Unitoffers a carabiner connector on the top end and an aluminumself-locking snap hook to secure the harness. 10' lanyard featuresstrong, durable 13⁄4" wide nylon webbing. Lanyard will minimizefall arrest forces to 1,800 lbs.
• MSA Workman Fall Limiters offer a solid design and fast-actingbrake mechanism. A durable, engineered thermoplastic housingincreases service life and rugged, impact-absorbing protectivebumpers provide added durability. An integral load indicator letsyou know when it is time to remove the product from service.
• Guardian Self-Retracting Lifeline features a durable aluminumhousing and a quick-action braking system. The 1" nylon webbing has a working length of 11'.
• Miller Falcon Self-Retracting Lifelines are constructed of animpact-resistant nylon housing and corrosion-resistant stainlesssteel and aluminum components. Dual swivels prevent the lifelinefrom twisting during use. Improved load indicator on the snaphook identifies when the unit needs to be removed from service.
• Miller MightyLite Self-Retracting Lifelines offer a centrifugalbraking mechanism that limits free-fall to less than 24". Lifelineautomatically pays out and retracts as you move. Unit features ananodized aluminum case and a stainless-steel back plate.
• Miller Black Rhino Self-Retracting Lifeline is small and light,yet designed to endure the daily rigors of harsh environments.Quick-activating, high-strength stainless steel breaking systemarrests falls within inches. Internal shock absorber reduces fallarrest forces to under 900 lbs. The locking swivel snap hookaccepts a variety of anchorage connectors.
• MSA Dyna-Lock Self-Retracting Lanyards limit free-fall dis-tance, deceleration distance and fall arrest forces while allowingfreedom-of-movement and vertical mobility. Unit has a 41⁄2' persecond locking speed and a shock absorber to limit fall arrestforces to under 900 lbs.
• MSA Aptura Self-Retracting Lanyard offers a state-of-the-artdesign, fast-acting break mechanism and swivel on the housing.An integral load indicator lets you know when it’s time to removethe unit from service.
• Guardian Self-Retracting Lifelines feature a durable aluminumhousing and a quick-action braking system. Units feature stain-less steel and non-corrosive components for extended life andrequire recertification every two years.
Professional Series/Repairable Self-Retracting LifelinesSelf-Retracting Lifelines feed out either cable or webbing, then retract automatically as the worker gets closer to the device. These units prevent excessive free fall distances and decrease the chances of injury during a fall. These models are considered repairable and can be sent back to the manufacturer for re-certification if they are involved in a fall. All styles (excluding Guardian model) require no annual factory certification and meet applicable OSHA and ANSI standards.
* When using a SofStop Shock-Absorbing Lanyard, weightcapacity increases to 400 lbs.
www.mathesongas.com • 877-684-4427
262
Fall Protection Ropes/Ladders
Lad-Saf® LadderSafety SystemsThis system provides completesafety and security when climbing fixed ladders on poles, towers, tanks, etc. The shock-absorbing top bracket and tension-indicating bottom bracket serve as the anchors forthe steel cable which runs thelength of the climbing area.Safety Sleeve prevents falls bylocking onto the cable. Whenpurchasing the Safety Sleevesleeve only, it must be used with3⁄8” or 8mm diameter cable. It iseasily attached or removed anywhere along the cable andautomatically follows as youclimb or descend. Systemcomes complete with galvanizedmounting brackets, non-metalliccable guides, 3⁄8" diameter galvanized cable, safety sleeveand universal cross over harness. Meets applicable OSHAand ANSI standards. This product will ship separately,direct from the manufacturer.
Rope Grabs and RopesStainless steel Rope Grabs lock in theevent of a fall and move easily up anddown vertical lifelines to provide continuous fall protection. Trailing Modelprovides hands-free operation. Polyester/polypropylene Ropes have a locking snaphook and loop. Ropes measure 5⁄8" indiameter and have a tensile strength of9,300 lbs. 3' SofStop® Lanyard greatlyreduces fall arrest forces. Meets applicable OSHA, ANSI and CSA standards.
A
B
C
Roofers KitsChoose Kits with Snappy Anchors or Reusable Temper AnchorThese complete fall protection systems come in a bucket for easy transport and storage. All kits come witha Universal Harness and a Vertical Lifeline Assembly withshock pack, and positioning device with 18” lanyardextension to keep device within reach. 310 lb. rated.Meets applicable OSHA and ANSI standards.
Safe-TLadder SystemThis patented product allows for safe and easy access torooftops. System easily attachesto most standard extension ladders with a safety latch, andit can be hand tightened withouttools. Unit extends 36” aboveeave height to comply withOSHA regulations. System is made of high-strength aluminum with grips on thehandrails to prevent slipping in wet conditions.
1-2 3+12779 . . . . . . $254.50 241.80
ReusableAnchor
A
A. 11875 Kit with 5 Snappy Disposable Anchors and 25' Lifeline11876 Kit with 5 Snappy Disposable Anchors and 50' Lifeline11877 Kit with Temper Reusable Anchor and 25' Lifeline 1-2 3+11878 Kit with Temper Reusable Anchor and 50' Lifeline . . . . $165.55 157.30
Lanyard ExtenderThis 18" lanyard extension makes attaching a lanyard to a backD-Ring on a harness much easier. Unit has a snap hook at oneend and a D-Ring on the other end.
Rebar Positioning LanyardUse to position and tie-off to rebar assemblies. Lanyard allows workers to lean away from walls, while keeping their hands free.Unit incorporates one rebar snap hook and two locking snap hooksattached to a heavy-duty steel chain. Meets applicable OSHA andANSI standards.
Beam ClampsSteel Beam Clamps securely attach toI, S or W-beams. Swivel attachmentring prevents twisting of attachingdevices. Available in 9" or 121⁄2" maxi-mum beam width. Meets applicableOSHA and ANSI standards. This product will ship separately, directfrom the manufacturer.
Suspension Trauma Safety StepThe Safety Step is designed to help workers in a post-fall suspension position avoid the effects of suspensiontrauma. This unit allows workers to relieve pressure byinserting a foot into one of the step loops and thenstanding up in the harness. Workers can use a singleSafety Step or two Safety Steps (one for each leg) toprovide additional support, balance, and comfort. Thislightweight, versatile strap attaches (with or without acarabiner) to any harness and accommodates allheights and sizes. Meets applicable OSHA and ANSIstandards.
1-2 3+51098 Safety Step with Carabiner . . . $47.85 45.5051099 Safety Step without Carabiner 13.75 13.10
Fall Protection BagSafely store tools, equipmentand personal items in this versatile polyester bag.Features include a flap to protect contents from dustyenvironments, grommeteddrain hole, a drawstring opening and a carrying strap.Bag measures 10" Dia. X 14"H.
1-5 6+23114 . . . . . . . $17.75 16.90
Temporary Horizontal LifelineFor Two WorkersDesigned for easy installation and removal, this temporary horizontal lifeline system can be used for many applications. System can be rigged using a wide variety of anchorage connectors, increasing versatility, while reducing the need for special or engineered equipment. The shock absorber on thistwo-worker system clearly indicates that the system has seen fallarrest forces and should be removed from use. Kit includes a 60'polyester lifeline, line tensioner, 2 carabiner attachments, 2anchorage connector straps, 2 connecting o-rings and a carryingbucket. Can be used with any suitable 5,000 lb. rated anchorage.Meets applicable OSHA and ANSI standards.
Lifelines/Anchors Fall Protection
To Order: M-F, 7:00 a.m. to 7:00 p.m. CST 800-356-9100 | Fax: 800-845-9095 | conney.com
263
Lanyard ExtenderThis 18" lanyard extension makes attaching a lanyard to a backD-Ring on a harness much easier. Unit has a snap hook at oneend and a D-Ring on the other end.
Rebar Positioning LanyardUse to position and tie-off to rebar assemblies. Lanyard allows workers to lean away from walls, while keeping their hands free.Unit incorporates one rebar snap hook and two locking snap hooksattached to a heavy-duty steel chain. Meets applicable OSHA andANSI standards.
Beam ClampsSteel Beam Clamps securely attach toI, S or W-beams. Swivel attachmentring prevents twisting of attachingdevices. Available in 9" or 121⁄2" maxi-mum beam width. Meets applicableOSHA and ANSI standards. This product will ship separately, directfrom the manufacturer.
Suspension Trauma Safety StepThe Safety Step is designed to help workers in a post-fall suspension position avoid the effects of suspensiontrauma. This unit allows workers to relieve pressure byinserting a foot into one of the step loops and thenstanding up in the harness. Workers can use a singleSafety Step or two Safety Steps (one for each leg) toprovide additional support, balance, and comfort. Thislightweight, versatile strap attaches (with or without acarabiner) to any harness and accommodates allheights and sizes. Meets applicable OSHA and ANSIstandards.
1-2 3+51098 Safety Step with Carabiner . . . $47.85 45.5051099 Safety Step without Carabiner 13.75 13.10
Fall Protection BagSafely store tools, equipmentand personal items in this versatile polyester bag.Features include a flap to protect contents from dustyenvironments, grommeteddrain hole, a drawstring opening and a carrying strap.Bag measures 10" Dia. X 14"H.
1-5 6+23114 . . . . . . . $17.75 16.90
Temporary Horizontal LifelineFor Two WorkersDesigned for easy installation and removal, this temporary horizontal lifeline system can be used for many applications. System can be rigged using a wide variety of anchorage connectors, increasing versatility, while reducing the need for special or engineered equipment. The shock absorber on thistwo-worker system clearly indicates that the system has seen fallarrest forces and should be removed from use. Kit includes a 60'polyester lifeline, line tensioner, 2 carabiner attachments, 2anchorage connector straps, 2 connecting o-rings and a carryingbucket. Can be used with any suitable 5,000 lb. rated anchorage.Meets applicable OSHA and ANSI standards.
Lifelines/Anchors Fall Protection
www.mathesongas.com • 877-684-4427
Concrete D-Ring Anchor
Finally, a concrete anchor that will hold-up toits environment, for use in temporary or evenpermanent applications. Safe “hook-up”indicator notifies the user that the anchor hasbeen installed properly. Anchor is an idealconnection point for shock-absorbing lanyards, self-retracting lifelines, or even horizontal lifeline systems. Unit installs into11⁄16", 18mm or 3⁄4" holes. Meets applicableOSHA and ANSI standards.
Beamers™Beamers are designed for
fall arrest anchorage and also make an excellentend point for horizontal lifeline systems. Units installto a beam structure in seconds and are easily adjustable.Vertical Beamer can be used for vertical, angled or horizontalcolumns. When used at foot level, a 5’ Single Leg Shock-Absorbing Lanyard must be used. Meets applicable OSHA andANSI standards.
Roof AnchorsRidge-It Anchors are designed for new construction or as a retrofit on wood rooftops.Anchors are constructed of stainless steel with zinc-plated steel D-rings for long servicelife. Snappy Disposable Anchor provides a safe tie-off point for temporary work where apermanent anchorage point is not necessary. When the job is complete, anchor can bebent over and the roofing material installed directly over the destroyed anchor point.Install the Truss Boss Anchor to a truss while on the ground. All styles include fasteners.Meets applicable OSHA and ANSI standards.
Concrete AnchorsEstablish a safe anchor point by insertingthese single-user anchors into a properly-sized, cured concrete hole. Anchors arereusable, so they can be removed and re-installed in a new location. Meets applicable OSHA and ANSI standards.
D-Bolt AnchorThis D-Bolt Anchor is designed as the interme-diary for securing a connecting device to ananchor point. The D-shape prevents roll out.Meets applicable OSHA and ANSI standards.
Cross Arm Strap and CarabinerWrap Cross Arm Strap around a beam or structure to provide an anchor point. Features 2"W X 6'L nylonwebbing with pass through D-rings. Locking Carabinerconnects lanyards, retractable lifelines or similar devicesto an anchoring point. Self-locking gate. 1" throat opening. Capacity: 400 lbs. Items meet applicableOSHA and ANSI standards.
Tool LanyardsDon’t let tools slip away when workingin high places.• Single and Dual Carabiner Tool
Lanyards keep tools tethered to the worker. Single style features an adjustable barrel lock that attaches to the tool on one end. The stretchable inner cord is surrounded by a rugged nylon webbing.
• Wrist Lanyard features a poly webbing cuff that attaches to the wrist and an adjustable barrel lock to secure the tool.
C
CarabinersConvenient, twist-lock carabiners have an unlimitednumber of uses. Maximum working load is 400 lbs. andminimum tensile strength is 5,000 lbs. Meets applicableOSHA and ANSI standards.
PremiumCross ArmStrapsPremium CrossArm Straps aretwice as durablewith dual-enforced 2" webbing andheavy-duty stitching. The wearpadprotects thewebbing againstabrasion andsnags. Strapfeatures a largeD-ring and a standard size D-ring forpass-throughto increasethe versatili-ty of lengthadjustment.Meets applicable OSHA andANSI standards.
Webbing/Hook AnchorUnit is designed to assist anchoringto scaffolding, pipe or angle iron.Features a large 21⁄2" hook for easyinstallation and a D-ring to accom-modate a connecting device.Capacity: 400 lbs. Meets applicableOSHA and ANSI standards.
Impalement Protective CapsA self-centering formed steel insert seats these plastic caps perpendicular to the rebar. Protective Cover Adapter is a plasticinsert which mates with the caps to create a saddle into which double 2 X 4’s can be secured to create a system to protect rows of inline rebar. Meets applicable OSHA standards.
Econ-O-Guard Protective CapsThese caps minimize possible accidents and protect both employees and equipment. Caps are reusable, weather-resistantand brightly colored for good visibility. Caps are not intended for use as fall or penetration protection.
For Rebar,Pipes and Bolts
A
B
1-5 6+A. 11903 Cap for Rebar Sizes 3 – 7, 25/Box . . . . . . . $34.55 32.85B. 11904 Cap for Rebar Sizes 7 – 12, 25/Box . . . . . . 69.55 66.10
G-Rail SystemThis free-standing portable fall prevention system requires no rooftopsurface attachment. Skid-resistant galvanized Base Plates preventrust from bleeding onto the rooftop. Guard Rails are powder coatedsafety yellow and include a weather-protected instructions holder. Use Short Toe-Board Holder when attaching a board to the width ofthe base and Long Toe-Board Holder when attaching a board to thelength of the base. Meets applicable OSHA and ANSI standards.
InstructionsHolder
Safety Guard Rail BaseUse these reusable bases for jobsite con-struction of temporary guard rails and handrails. Choose either a Steel or Plastic base.Meets applicable OSHA standards.
