308

311 312 315

CAR & SAFETY

Tablet & phoneholders Car chargers Safety tools Tyre gauges Emergency torches First aid sets

309

318

CAR & SAFETY

To live is to take risks. But don’t be reckless about it, surround yourself with safety elements on your life’s journey.

Waterproof safety kit

310

P330.251

CAR & SAFETY

Dashcam

Easy to install and use dashcam with 2.4” display with 1080 x 720 resolution. Will record automatically when the car is powered on and the device is connected to the car charger included. With night vision mode to record in the dark and wide angle option to make wider shots and microphone to record sound. Will automatically overwrite when the extendable memory card (not included) is full. Includes rotatable suction mount.

Size 3 x 6,5 x 7,5 x Ø 1,3 cm Max. printsize 10 x 10 mm Printtechnique Pad print

With 2.4” display

Including nightvision mode

Including car charger to use the device without any restriction

311

P325.201

P302.691 P302.693

P302.821 P302.823

NEW!CAR & SAFETY

Safety car phone holder

Unique design mobile phone holder with safety functions. Simply stick the included metallic disk with 3M adhesive tape to the back of your phone and and place the phone with metallic disc centered over the car cell phone holder. The holder can be mounted on the air vent of your car to enable easy access to your phone. The holder includes a car hammer and seatbelt cutter that can be used in case of an emergency. Made out of durable ABS material. Registered design.

Size 8,4 x 3,7 x 4,9 cm Max. printsize 20 x 25 mm Printtechnique Pad print

360 car phone holder

Backseat tablet holder

Ensure no more complaining and bored passengers in the back of your car. This ABS tablet holder can be placed on the headrest of the front seat. The tablet can then be used to watch movies, play games or listen to music. The holder is adjustable for multiple sized tablets up to 10 inch.

Size 7 x 13 x 11 cm Max. printsize 60 x 50 mm Printtechnique Pad print

Universal and 360 degree rotatable car mount to hold your mobile phone when driving. Simply click the item on your air vent and place your mobile phone (up to 6”) in the holder. Made out of heat resistant ABS and strong silicon to make the item long lasting and avoid it from falling off your air vent while driving. With stainless steel mechanism inside to ensure your phone stays in place.

Size 7 x 5,5 x 2,5 cm Max. printsize 30 x 10 mm Printtechnique Pad print

Strong stainless steel mechanism inside

Suitable for mobile phones up to 6”

Strong silicon to last long time

312

P302.652

P302.422

P302.521

P302.951 P302.953

Car charger with hands-free earbud

Unique design car charger with integrated wireless headset that allows a safe hands-free experience whilst driving. The integrated earbud is charged when driving and is ultra-portable due to its small design (20 x 33 mm). The device uses the advanced wireless BT 4.1 connection which ensures a smooth connection and perfect sound quality. The magnetic top of the charger allows you to easily place the earbud back in the dock to charge it. The charger is suitable for all mobile phones. The earbud comes with additional ear tips in different sizes to get a good seal for all. Output 5V/1A.

Size 8,6 x Ø 2 cm Max. printsize 25 x 7 mm Printtechnique Pad print

Car charger with integrated wireless earbud using wireless BT 4.1 for perfect connection. The earbud can be used up to one hour on one single charge and can be fully re-charged in 1.5 hours. ABS material. Input 12-24V/output 2.1A.

Size 3,2 x 3,2 x 9 cm Max. printsize 12 x 9 mm Printtechnique Pad print

Car charger with integrated wireless earbud

Car charger cup with hands-free earbud

Car cup charger to extend the mobile power in your car. Simply place the charger in the cup holder of your car to generate a powerful charging unit for all your mobile devices when on the road. With two USB ports (2.1/1A) and two additional cigarette lighter sockets (65W, 8-30V, 6A) plus integrated wireless earbud for safe hands-free experience. The 40 mAh battery can be automatically charged within 1.5 hours and will last up to 1 hour when using. Wireless BT 4.1. ABS material.

Size 6 x 8 x 9 x Ø 8 cm Max. printsize 25 x 25 mm Printtechnique Pad print

ABS car charger with one type C and one USB port. Perfectly suitable to charge any type of mobile phone even the new generation mobile phones with type C. Matt body with trendy shiny detail on top. Output 5V/2.4A (total).

Size 3,3 x 3,3 x 7,2 cm Max. printsize 18 x 5 mm Printtechnique Pad print

Car charger type C

CAR & SAFETY

313

P302.401 P302.408

P239.511

P302.831

Dual port car charger with belt cutter and hammer

Dual USB port car charger that can charge two devices at the same time. The car charger has an aluminium top with belt cutter. The bottom has window hammer function that can be used in case of an emergency. Output 5V/3A.

Size 2,7 x 2,9 x 8,1 cm Max. printsize 5 x 30 mm Printtechnique Pad print

Dual USB port car charger that can be used to charge two mobile devices at the same time. This charger also includes a belt cutter and a window breaker in case of an emergency. Output: 5V/2.1A.

Size 5,1 x 2,3 x 6,8 cm Max. printsize 16 x 26 mm Printtechnique Pad print

3-in-1 safety charger

6 in 1 car emergency tool

6 in 1 car emergency tool. Including 2200mAh power bank, USB car charger, belt cutter, safety window breaker, LED torch and red flashing emergency light. The power bank can be charged via the cigarette lighter or via an USB wall charger. Input: 12V-24V, output: 5V/1A.

Size 2,6 x 4 x 11,4 cm Max. printsize 20 x 10 mm Printtechnique Pad print

CAR & SAFETY

314

P239.941P239.572

Automatic tyre pump

No more inflation struggles with this portable, yet powerful (60W) automatic tyre pump, that enables you to inflate tyres of both cars and bikes. The pump has a rechargeable 500 mAh lithium battery that can be recharged via USB and can be fully recharged within 1.5 hours. The pump is suitable for inflating car, motorcycle, bike tyres and sport balls. For car tyres, the pump can be used to inflate the tyre in case of emergency, to make it to the next service station. When charging a car tyre, the item needs to be connected to a car cigarette lighter socket for direct energy. The pump has an automatic shut down function when the maximum pressure is reached. Can also be used in reverse function to monitor the tyre pressure. Made out of high quality aluminum with LCD display to monitor the pressure. Including charging cable, valve converter and air tube. Power supply: 12V. Maximum pressure: 150 PSI.

Size 4,5 x 5,5 x 19,8 cm Max. printsize 80 x 20 mm Printtechnique Pad print

Car safety set

Safety set comprising of a strong 0.5W LED torch with integrated bottle opener at the back and multifunctional knife with emergency hammer and belt cutter. Both items can be stored in a Swiss Peak pouch and stored in the car in case of any emergencies. Registered®

Size 16 x 16,8 x 3,4 cm Max. printsize 35 x 8 mm Printtechnique Pad print

CAR & SAFETY

315

P239.311

P239.611

P239.622

NEW!

P239.192

Car Jump starter set

Multifunction tool that includes a COB light, safety hammer, belt cutter and magnet. The light can be switched into red emergency mode to attach to your car with the built-in magnet. The safety hammer and window breaker can be used to escape in case of an unfortunate situation. Made out of silicon and aluminium material. Includes 4 cell batteries for direct usage.

Size 15,3 x 2,8 x Ø 2 cm Max. printsize 8 x 60 mm Printtechnique Pad print

Portable car jump set. Comes in EVA pouch to store it in your car. Including jump starter cables, 12V car charger and 15V adapter. The jump starter has an integrated torch that can be used in case of emergency and can be used as power bank to charge your mobile phone.

Size 18,5 x 22 x 7 cm Max. printsize 40 x 80 mm Printtechnique Pad print

COB 4-in-1 car tool

All in one digital tire gauge

Multifunctional tyre gauge in ABS case with all necessary safety functions. You will be able to check your tyres and even deflate them, cut your seat belt, brake your window and light the environment.

Size 19,5 x 6 x 2,8 cm Max. printsize 20 x 10 mm Printtechnique Pad print

Digital tyre gauge with tyre depth gauge, silver ABS body, black grip with back light, red LED. Range 5-100 PSI, 0,5-7 Bar, 50-700 Kpa.

Size 13,8 x 3,8 x 2 cm Max. printsize 35 x 15 mm Printtechnique Pad print

Digital tyre gauge

CAR & SAFETY

316

P239.212

P239.402

P513.722

Emergency light with hammer

1W aluminum emergency torch. The torch can be used as a regular torch but also as emergency light in case of need. The torch has 3 light modes: red light and red flashing and regular white light torch. With magnet on the bottom to attach it to any metal surface.

Size 3,3 x 3 x 13,5 cm Max. printsize 35 x 10 mm Printtechnique Pad print

Emergency light, silver ABS case, 1 white LED and 9 red flash lights at side, cutter, window breaker and magnetic base to place on the roof of the car.

Size 19,5 x 7 x 4 cm Max. printsize 50 x 15 mm Printtechnique Pad print

Car emergency torch

Safety torch with magnet

Aluminium body with 9 white LED’s on the top of the torch, 18 white LED’s + 6 red LED’s on the side of the torch.

Size 24,5 x Ø 3 cm Max. printsize 70 x 10 mm Printtechnique Laser engraving

CAR & SAFETY

317

P239.501

P416.331

P265.185

4/5

Alcohol breath tester

Acc. to EN14604 standard, case in white colour. Including set of screws.

Size 3,5 x Ø 10 cm Max. printsize 40 x 20 mm Printtechnique Pad print

ABS case with red LED and keyring.

Size 2 x 3,5 x 7,5 cm Max. printsize 15 x 10 mm Printtechnique Pad print

Smoke alarm

Bike repair kit

Blue pouch with reflective line on top, including 15 functions multitool with slotted screwdriver, cross-head screwdriver, nut driver, hex keys: 2mm, 2,5mm, 3mm, 4mm, 5mm, 6mm, wrenches: 8mm, 10mm, 15mm, spoke wrench: 14GE, sockets: 8mm, 9mm, 10mm, set with black plastic rack, 2 nickel plated crowbar, tube glue, grinder and 3 rubber patches.

Size 11,7 x 9 x 4,5 cm Max. printsize 45 x 17 mm Printtechnique Pad print

CAR & SAFETY

Original packaging

With customized sleeve

Unique, stylish and memorable packaging

Ideal for events or other gift giving occasions

Selected articles from stock

SLEEVE & SURPRISE

318

NEW!

P265.354 P239.251

P265.121 P265.123 P265.124P265.244

Waterproof first aid kit

600D polyester pouch with dynamo torch, reflective vest, 10” work glove and 1pc first aid kit pouch with triangle bandage, PBT bandage, alcohol pads, swab, plasters, scissor, pins and tape. Conform EN13485:2003.

Size 6,5 x 32 x 12,5 cm Max. printsize 120 x 35 mm Printtechnique Screen transfer

First aid kit including 5 pcs adhesive strips and a non woven sponge, 2 alcohol prep pads and 2 moist towelette. Packed in a splash water proof plastic box.

Size 7,5 x 3 x 11 cm Max. printsize 40 x 15 mm Printtechnique Pad print

Standard car safety set

Keychain CPR mask

Small CPR face shield for mouth to mouth resuscitation in webbing style pouch with velcro closure and steel keyring. Conform EN 13485:2003.

Size 5,5 x 2 x 5 cm Max. printsize 35 x 10 mm Printtechnique Pad print

24 pcs zipper pouch, including bandage, medical gloves, pair of scissors and tape in nylon pouch, contents are flat packed so complete set fits mailbox, 200g. Conform EN 13485:2003.

Size 10 x 15 x 5 cm Max. printsize 80 x 40 mm Printtechnique Screen transfer

Mail size first aid kit

CAR & SAFETY

319

P239.304

P265.310 P265.313

P265.034

P265.064

47 pcs first aid car kit

18 pcs tin box, including plasters, antiseptic pads, bandage, tweezers, tape and pair of scissors, conform EN 13485:2003.

Size 3,1 x 7,5 x 9,1 cm Max. printsize 60 x 20 mm Printtechnique Pad print

EVA case with reflective vest, dynamo torch, silver emergency blanket, triangular bandage, PBT bandages, alcohol pads, antiseptic swabs, cleansing towelettes, non-woven swabs, tape, plasters, pins and plastic scissors all conform EN13485:2003.

Size 35 x 8 x 14 cm Max. printsize 180 x 40 mm Printtechnique Screen transfer

First aid tin box

First aid set in pouch

Pouch with one front pocket, one black zipped main compartment and belt loop on reverse side of pouch. Content: triangle bandage, PBT bandage, alcohol pad, plasters, scissors, pin and tape, conform EN 13485:2003.

Size 13,5 x 8,9 x 4,6 cm Max. printsize 80 x 35 mm Printtechnique Screen transfer

350ml stainless steel outside and ABS inside mug with handle, 0,2L detachable first aid compartment (including foldable scissors, bandage, antiseptic pads, tape and plasters, conform EN 13485:2003) also to be used as mug. Registered design®

Size 8,3 x 12,3 x 20 cm Max. printsize 35 x 60 mm Printtechnique Pad print

First aid coffee mug

CAR & SAFETY