Date post: | 14-Jun-2015 |
Category: |
Engineering |
Upload: | houshang-ansari-kajal |
View: | 839 times |
Download: | 5 times |
Incremental sheet metal Forming
single Point Incremental Forming
Metal forming Course
Compiled By: Houshang Ansari kajal
Hassan kargar Pishbijari Hassan Yousefinezhad Gildeh
MS.C Students Of Manufacturing & Production
lecturer : Dr.M.bakhshi
Babol Industrial University www.nit.ac.ir
Dec.2012 1/31
Contents:
1- Abstract
2- Introduction
3- Methods
4- Characteristics
5- Applications
6- Tools & Equipments
7- Advantages & disadvantages
8- Conclusion
9- Suggestion
10- Research & Developments
11- Acknowledgments
12- References Return
2/31
Abstract During the last decade, incremental forming is an innovative
processing method which has been strongly investigated. Its potential
as a flexible manufacturing method was noticed.
Incremental sheet forming is a method , where a spherical
numerically controlled tool is used to push the sheet to the desired
shape against a simple support tool.
keywords: Incremental sheet forming , Die less Forming ,
Return
3/31
Introduction In the manufacturing world of today , the
demand of highly customized is increasing every
day . Even if the mass production is still used, the
small quantity batches are more and more
required. The key words of manufacturing are:
Flexibility , product customization, Customer
Orientation , high quality , low production cost.
In sheet metal forming techniques
, several evolution has made big steps
in the last period of time:
Return
4/31
Steps in sheet metal forming
1-Conventional Deep Drawing
2-NC control for stamping & bending
3-Hydroforming.
4-Multi-point tools
5-Incremental Sheet forming (ISF)
Return
5/31
Conventional Deep Drawing
Return
6/31
CNC control for stamping & bending
Return
7/31
Hydroforming.
Return
8/31
Multi-point tools
Return
9/31
Incremental Sheet forming (ISF)
Return
10/31
History of ISF
Variations of ISF have long been practiced in small workshops and
private enterprises , and some early concepts of ISF were patented:
1- In the USA by Roux (1960) and Leszak(1967).
2- Academic research bean in the early 1990 in Japan
3- Recently has attracted increasing interest in Europe and Canada.
SPIF & TPIF
4- SPIF of circular and elliptical by Iseki et al (1993)
5- Used FE analysis to strains by Shim and park (2001)
6- Moving back and forth along a straight line by Kim and park (2002)
7- Pyramids formed by SPIF and TPIF byBambach et al (2003)
8- Cone formed byFratini et al(2004)
8- A comprehensive review of the development of the process is given
by Jeswiet et al (2005)
Return
11/31
Method's
Return
12/31
Method's Spinning
Return
13/31
Method's Single-point
Return
14/31
Method's Two-point
Return
15/31
Method's -> SPIF & TPIF
Return
16/31
Characteristic's
Return
17/31
Forming Step & Tool patch
Return
18/31
Forming Step & Tool patch
Return
19/31
Application’s
Return
20/31
Application’s
Return
21/31
Forming Parameters
Return
22/31
d: Tool diameter
t.: Sheet thickness
α: Tool direction angle
S: Spindle rpm
f: Federate
∆z: Step movment
Tools & equipment’s
Return
23/31
Hexapod machine
Forming Tool
Return
24/31
Tools & equipment’s
RoBoShaping
Advantages & disadvantages Advantages :
1- The advantage of utilizing a conventional CNC milling machine.
2- Increase in materials formability due to the nature of the process.
3- The great flexibility derived from the absence of positive or negative dies.
4- Easley in re-setup of equipment's for part changing.
5- forming forces is too small than Deep Drawing forces.
Return
25/31
Advantages & disadvantages
Disadvantages:
1- Spring Back.
2- Sheet fracture under Tool 3- deformation and Un-like form
Pressure and friction.
4- forming time is too large than deep drawing time.
5- In negative forming ,it’s difficult to form sharp corner & edge
because crack easily occur.
6- Deformation and Un-Like form sometimes occur.
Return
26/31
Conclusion
1- Increase in sheet thickness Increase in strain Increase in formability.
2- Increase in Tool diameter decrease in stress decrease in formability.
3- Increase in Tool Federate Increase in stress decrease in formability.
4- Increase in Tool speed Increase in heat Increase in formability.
Return
27/31
Return
28/31
Suggestion’s
With discussed characteristic's and flexibility of ISF(SPIF & TPIF)
We suggestion’s to provide research for following further
application :
1-Use of ISF to forming thermoplastics sheet.
2- Use of ISF to car body smoothing.
3- Deliberation of pre-heat effect on formability.
Return
29/31
Research & Developments
Macro Incremental Forming
the main focus of our work has been on application-oriented research and
development in the field of production technology for the automotive and
mechanical engineering sectors.
Acknowledgments
With special thanks to:
Professors of Metal forming - Babol Industrial University
Return
30/31
References
1- Jong-Jin park , Yung-ho Kim, “Fundamental studies on incremental sheet metal forming
technique” , Journal of Materials processing Technology 140 (2003) 447-453.
2- “Incremental sheet metal forming : a die –less rapid prototyping process for sheet metal” , IMRC
(manufacturing Process and systems Research project), University of BATH.
3- Crina Radu ,” Effect of process parameters on the quality of parts processed by single point
incremental forming”, International journal of modern manufacturing technologeis , vol.III.No.2/2011.
4- Alexandru C.FILIP , Ion NEAGOE,”An overview on incremental sheet forming , a method for rapid
manufacturing of hollow metal parts", Academic journal of manufacturing engineering , vol.8,issue
3/2010.
5- M Skjoedt , M B Silva , P A F martins , N Bay , “ strategies and limits in multi-stage single-point
incremental forming", technical university of Denmark, department of mechanical engineering,
kongens lyngby, Denmark, strain Analysis vol.45.
6-W.C.Emmens , D.H.Van , A.H.Van,” The FLC , enhanced formability , and incremental sheet
forming”,International Deep drawing research group.IDDRG 2009 int.Conference.Golden.Co.USA.
7- A.petek,K.kuzman,J.Kopac,”Deformation and forces analysis of single point incremental sheet
metal forming”,International scintific journal , vol.35.issue 2.feb 2009.
8- Kathryn jackson,Julian Allwood ,”The mechanics of incremental sheet forming”,Department of
engineering,University of cambridge,Journal of materials processing technology 209(2009,1158-1174)
تجربی و تئوری بررسی «؛ ور جواب داریوش ؛ آقچای جاللی عبدالحسین ؛ جدیدی یوسفی محسن-9 مهندسی ملی همایش ،«تدریجی دهی شکل فرآیند در ورق پذیری شکل میزان بر فرایند پارامترهای تاثیر
.1391 مهرماه ، الیگودرز واحد اسالمی آزاد دانشگاه ،NCME2010مکانیک دهی شکل فرایند در فلزی ورق دهی فرم عیوب بهبود«، صفت وفایی عباس ، نظامی گر ریخته وحید -10
اسفندماه ، ICME 2010 ایران تولید و ساخت مهندسی کنفرانس دهمین ، » فلزی ورقهای ای نقطه چند .بابل نوشیروانی صنعتی دانشگاه 1388
دهی شگل فرآیند در دورانی سرعت تاثیر تجربی و تئوری بررسی”، وحدتی مهدی ، وحدتی علیرضا-11 دانشگاه ایران، تولید و ساخت مهندسی کنفرانس ،دهمین”تراش ماشین روی بر فلزی ورق تدریحی 1388 اسفند بابل صنعتی
Return
31/31