TSI
Testing Services from independent accredited laboratories expert in LED Lighting Technologies
Independent Testing Services For All Lighting Companies
We do not believe in testing for testing sake. Our philosophy is: Test once. Test smart. Test e�ciently.The lighting marketplace is facing unprecedented change. As rapidly-evolving technology enters the mainstream, widespread confusion and mistrust of data is prevalent. During this time of constantly-changing regulations, standards and compliance requirements, a trusted independent source becomes imperative.
At LUX-TSI we don’t believe in a ‘one size fits all’ approach to testing.
Testing is critical for all products. However it is often perceived as an expensive and confusing process with a plethora of standards and potentially extensive and costly testing.
At LUX-TSI, we have developed a modular, scalable approach, allowing customers to de-risk all of their testing and to manage their costs e�ectively.
Our safety and performance engineers are here to support our customers through this process to ensure the right elements of test are performed at the right time and never duplicated, helping our customers to direct testing back down the supply chain where appropriate.
At LUX-TSI we cover the full spectrum of testing requirements. Your one-stop-shop for all your testing and certification needs.
Whether you need Photometry, Energy E�ciency, Safety, Photobiological, RoHS, Environmental, Life testing or EMC testing, LUX-TSI is your one-stop-shop for testing to any standards as well as bespoke energy performance incentive schemes - such as California Energy Commission (CEC), Enhanced Capital Allowance (ECA) and Energy Star.
As the UK’s leading ISO 17025 Accredited laboratory, we can provide a one-stop-shop for all of your Global market Access needs.
Our UKAS Accredited laboratories contains the industry’s most advanced equipment including industry leading Type C Moving Mirror Goniophotometer, Integrating Spheres, Type B Imaging Goniophotometer and Gonio spectroradiometer, imaging colorimeter and photometer, along with a 30m tunnel capable of performing retro-reflective testing of any products or materials.
Our international photometry expertise is here to support all your testing and consultancy needs.
We help to reduce the cost, risk and time taken to demonstrate compliance. That’s why our customers return time and time again.
LUX-TSI can fulfill your testing needs in the following areas.
Photometric Testing
Unique within the UK, our laboratory can provide UKAS (ILAC) - accredited goniometric testing
Environmental and LifeTesting
To ensure performance in the extremes of a real life environment
EMC Testing
Cost-e�ective, accredited EMC testing
RoHS Testing
• State of the art Type C goniometer• Intensity distribution measurements• IES / Eulumdat files• Accredited LM-79 / EN13032 reports• High Res images for marketing
datasheets• Spectral analysis including CCT, duv,
CRI, CQS, TM-30 color qualityindicators
• Glare and Flicker assessment
• Temperature & Humidity• Thermal Cycling (Climatic chambers),• Drop & Vibration testing• Ingress Protection IP rating• Impact Protection IK rating• Verification Certificate
• MIL / JES / JEDEC standards• IEC 60529• IEC 62262
• Compliance to EMC Directive• Radiated and Conducted Emissions• Radiated and Conducted Immunity• Harmonics, Flicker,
Transients and ESD
• EN 55015 (CISPR 15)• EN 61000-3-2 & EN 61000-3-3• EN 61547• FCC
• Temperature & Humidity• Thermal Cycling (Climatic chambers),• Drop & Vibration testing• Ingress Protection IP rating• Impact Protection IK rating• Verification Certificate
• EN 62321:2009
• IES LM-79-08 / CIE S 025 EN 13032 /LM-85-14 standards
• DOE Lighting Facts• Design Lights Consortium (DLC),
California Energy Commission• Energy Star submissions• Elexon UMS testing• Global Energy E�ciency Standards
• Thermal Imaging• In-situ Temperature Assessment
of LEDs (ISTMT)• Lumen Maintenance• Colour Maintenance• Accelerated Ageing Testing• Temperature Cycling• Power (Supply) switch Cycling
• IES LM-80 / TM-21• IES LM-84 / TM-28• IES LM-82 / LM-85• IEC/EN 62612 (LED Lamps)• IEC 62717 (LED modules)• IEC 62722 (LED luminaires)• Eco-design directive 1194/2012• Automotive EN 60809/60810
• Compliance to the Low VoltageDirective (LVD)
• Testing covers every aspectincluding: Lamp
• Module/Light Engine• Luminaire• Drivers and Controls
• IEC/EN 60598, 62031, 62560• IEC/EN 61347• IEC/EN 62471:2008, IEC/TR62778
IEC 60825 laser safety• Support for North America NRTL
(UL/ETL/METL) submissions to UL1598/2108/8750 standards
Lifetime Performance Testing
Our UKAS (ILAC) – accredited testing can support your submission for any global schemes
Safety Testing
O�er a modular, scalable approach, allowing you to de-risk your safety testing and manage the costs e�ectively
TSI
Our Services Consulting, Testing, Certification, Systems, Global Market Access
Markets Electrical, Lighting, Household, Light and Heavy machinery
[email protected] +44 1656 864618www.lux-tsi.com
About LUX-TSI
We understand that each customer has individual needs and individual concerns. That’s why we tailor our support to meet the needs of manufacturers, importers, distributors and retailers in locations which span the world. With over 150 years of experience in the performance testing of products, LUX-TSI has a deep-seated understanding of the regulatory requirements across multiple territories, enabling us to identify the most cost-e�ective, low-risk path to market access.
A S S O C I A T ELABORATORYPROGRAMME
4701
Why Choose Us
• LUX-TSI has the fastest turn arounds in the industry - meeting our client's tight time schedules.• We are known for our great customer service. Always ready to listen to your problems and develop
solutions tailored to your needs.• We are easy to work with, our small company non-bureaucratic approach to ‘making it happen’.