Key features at a glance
Products 2001 – Subject to change – 01/081.3-0 Festo AG & Co.
Pneumatic linear drive units DGP/DGPLRodless drive units
1
4
6
2
3
5
7
DGP
with driver
DGPL
with slide
DGPL-...-HD...
with heavy-duty guide
-V- New
– Protected version GA with shock
absorber kit E
– Version free of copper, Teflon and
silicone CT
– Load inverter AK
-N- Diameters
8 ... 80 mm
-T- Stroke lengths
10 ... 3000 mm
-N- Diameters
18 ... 40 mm
HD18 ... HD40
-T- Stroke lengths
10 ... 2160 mm
Pneumatic linear drive units
DGP/DGPL
– Precision, rigid guide
– Greater flexibility thanks to wide
choice of mounting and assembly
options
– Variable end-position cushioning
systems
– External clamping unit
– Wide range of options for mounting
on drive units
1 Double-acting piston drive
2 Profile barrel
3 Driver
4 Slide
Pneumatic linear drive units with
slide, adjustable end-position
cushioning and recirculating ball
bearing guides DGPL-...-PPV-KF
– System product for positioning,
handling and assembly technology
– External clamping unit
– Wide range of options for mounting
on drive units
Software tools
on CD-ROM: Pro Drive
5 Versatile supply ports
6 Sensors can be integrated
7 Adjustable end-position
cushioning
1.3
➔ Index
Key features at a glance
01/04 – Subject to change – Products 2001 1.3-1Festo AG & Co.
Pneumatic linear drive units DGP/DGPLRodless drive units
Optimal concept of multiple
functionalities
Pneumatic linear drive units
Basic drive unit
Alternatives
with driver
DGP
with slide
DGPL
with heavy-duty guide DGPL-...-HD...
Pneumatic drives Electro-mechanical drives
Pneumatic linear drives
DGO
Toothed belt drives
DGE-...-ZR
Spindle drives
DGE-...-SP
� 1.3-46 � Vol.1 / 3.2-58 � Vol.1 / 3.2-0
1.3
Key features at a glance
Products 2001 – Subject to change – 01/081.3-2 Festo AG & Co.
Pneumatic linear drive units DGP/DGPLRodless drive units
Versatility through
mounting,
assembly,
sensors,
supply ports,
end-position cushioning
and clamping attachments
* Variants are dependent on the drive sizes
** Variant is dependent on the slide position
Mounting options
Pneumatic linear drive units DGP...
can be mounted directly onto basic
elements (base plates, drive units
etc.) using slot nut connectors, central
supports or foot mountings.
1 Slot nut connectors*
Mounting nuts in profile barrel
(screws and slot nuts).
2 Central supports*/**
Mounting nuts in profile barrel
(central supports, screws and
slot nuts).
3 Foot mounting
Threaded holes in the end caps
(screws and mounting bracket).
Mounting options
Loads and devices can be directly
mounted on the driver, slide and
heavy-duty guide.
4 Driver
Through holes and reamed holes
for load inverter and moment
compensator.
5 Slide**
Threaded holes or mounting
slots and reamed holes in the
slide
(screws, slot nuts and centring
sleeves/pins).
6 Heavy-duty guide
Mounting slots and reamed
holes in the heavy-duty guide
(screws, slot nuts and central
mounting).
Sensors
7 Integrated sensors
Sensor slots for one or more
proximity sensors SME/SMT-8.
Proximity sensors SMT-8 are not
suitable for� 8 and� 12 mm.
For space-saving and reliable
sensing of piston positions.
Proximity sensors can be freely
moved and clamped in their
slots.
Versatile supply ports*
8 Options on three sides, one side
only for DGPL-...-HD.
9 Second supply port, options on
three sides, one side only for
DGPL-...-HD.
Variable end-position cushioning*
aJ Flexible cushioning elements
aA Adjustable end position cushion-
ing
End-position cushioning
aB Hydraulic shock absorbers
External clamping unit
for pneumatic linear drive units
DGP with driver:
aC Front (clamping unit)
aD Rear (clamping unit)
DGPL with slide:
aE Base (clamping unit)
-H- Note
Multi-axis connecting components
� Vol.1 / 3.4-0
1.3
Key features at a glance
01/04 – Subject to change – Products 2001 1.3-3Festo AG & Co.
Pneumatic linear drive units DGP/DGPLRodless drive units
Pneumatic linear drive units
127aD
127aC
4 38aJ aA
12739aJ aA
with driver
DGP
127
5
38aJ aA aB
127aE39aJ aA aB
with slide
DGPL
17
17
6
38aJ aB
1239aJ aB
with heavy-duty guide DGPL-...-HD...
1.3
-V- NewKey features at a glance
Products 2001 – Subject to change – 01/081.3-4 Festo AG & Co.
Pneumatic linear drive units DGP/DGPLDrives
1
32
DGPL-...-GA
protected version
-V- New
-N- Sizes
25 ... 40 mm
-T- Stroke lengths
10 ... 2000 mm
– Double-acting piston drive
– Precision, rigid guide
– Greater flexibility thanks to wide
choice of mounting and assembly
options
– Wide range of options for mounting
on drive units
– Adjustable end position cushioning
-H- Note
Protection of the drive unit guide is
only guaranteed for horizontal oper-
ation. The mounting position (� dia-
gram above) must be observed. The
drive unit is only protected against
particles from above.
1 The cover profile made from
anodised aluminium provides
protection against foreign
particles.
2 For high loads in the end posi-
tions, shock absorbers can be
screwed directly into the cover.
This can also be done at any
position under the cover profile
(with additional retainer KYP for
the shock absorber).
3 2 Mounting options on slide (top
and sides)
1.3
New -V-Product range overview
01/04 – Subject to change – Products 2001 1.3-5Festo AG & Co.
Pneumatic linear drive units DGP/DGPLDrives
Overview of permissible
combinations:
DGP-...
DGPL-...
DGPL-...-HD
Withdriver
Withplain-bearingguide
Withrecirculatingballbearingguide
Withheavy-dutyguide
Clampingunit*
Driver/slide,standard
Driver/slide,extended*
Slideattachmentposition**
Supplyporton
bothsides***
Mom
entcompensator,assembled
Load
inverter*
Free
ofcopper,teflonandsilicone
Protected
version*
Code
DGP
DGPL-GF
DGPL-KF
DGPL-HD
KV/KH/KU
GK
GV
SH/SV
D2
FK AK-V
-
CT-V
-
GA-V
-
With driver DGP • • • • • • •
With plain-bearing guide DGPL-GF • • • • • •
With recirculating ball bearing guide DGPL-KF • • • • • • •
With heavy-duty guide DGPL-HD • • •
Clamping unit* KV/KH/KU • • • • • • • •
Driver/slide, standard GK • • • • • • • • • • •
Driver/slide, extended* GV • • • • • • • • •
Slide attachment position** SH/SV • • • • • • • •
Supply port on both sides*** D2 • • • • • • • • • • • •
Moment compensator, assembled FK • • • • •
Load inverter* AK -V- • • • • •
Free of copper, Teflon and silicone CT -V- • • • • • • • • • •
Protected version* GA -V- • • • • •
• Permissible combination
* Not available for all sizes
** SH is standard for DGPL
*** Standard for sizes 8 and 12
Overview of permissible
combinations
DG... and accessories
Slotcover
Slotcover*
Slotnut*
Slotnut*
Slotnut
Centringsleeve
Centralsupport
Centralmounting*
Footmounting
Proximitysensor
Plugsocketwithcable
Shockabsorber
Shockabsorber
Shockabsorber
Code
S B X Y U Z M Q F G/H/I*/
J*/N
V C D E-V
-
With driver DGP • • • • • • • •
With slide DGPL • • • • • • • • • • •
With heavy-duty guide DGPL-HD • • • • • • • • • • •
Driver/slide, standard GK • • • • • • • • • • •
Driver/slide, extended GV • • • • • • • • • • •
Protected version GA -V- • • • • • • • • • • •
• Permissible combination
* Not available for all sizes
1.3
-V- NewProduct range overview
Products 2001 – Subject to change – 01/081.3-6 Festo AG & Co.
Pneumatic linear drive units DGP/DGPLRodless drive units
– Versions GK/GV
– Slide SH/SV attachment position
– Supply port D2
– Moment compensator FKP
– Load inverter AK -V-
– Version free of copper, Teflon and
silicone CT -V-
Pneumatic linear drives
with driver DGP
-H- Note
The insertion point for the proximity
sensor is located on the right-hand
side of the pneumatic linear drive unit
DGP...
O = top
R = right
V = front
U = underneath
L = left
H = rear
Ordering data� 1.3-9
Accessories� 1.3-10
HHHHHHHH
– Clamping units KH/KU/KV
Additional functions
1.3
New -V-Product range overview
01/04 – Subject to change – Products 2001 1.3-7Festo AG & Co.
Pneumatic linear drive units DGP/DGPLRodless drive units
– Versions GK/GV
– Slide SH/SV attachment position
– Supply port D2
– Moment compensator FKP
– Version free of copper, Teflon and
silicone CT -V-
Pneumatic linear drives with slide
DGPL
SV
HHHH
HHHH
-H- Note
The insertion point for the proximity
sensor is located on the right-hand
side of the pneumatic linear drive unit
DGP...
O = top
R = right
V = front
U = underneath
L = left
H = rear
Ordering data� 1.3-9
Accessories� 1.3-10
Pneumatic linear drives with heavy-
duty guide
DGPL-... HD...
– Clamping units KH/KU/KV
– Protected version GA -V-
– Shock absorber kit E -V-
Additional functions
1.3
Ordering data
Products 2001 – Subject to change – 01/081.3-8 Festo AG & Co.
Pneumatic linear drive units DGP/DGPLRodless drive units
Standard drives Size Part No. Type
DGP with driver 8 158 969 DGP-...-P-A-B
12 158 970 DGP-...-P-A-B
18 158 971 DGP-...-PPV-A-B
25 161 780 DGP-...-PPV-A-B
32 161 781 DGP-...-PPV-A-B
40 161 782 DGP-...-PPV-A-B
50 161 783 DGP-...-PPV-A-B
63 161 784 DGP-...-PPV-A-B
80 161 785 DGP-...-PPV-A-B
DGPL-...-GF with slide and plain- 8 161 972 DGPL-...-P-A-GF-Bp
bearing guide 12 161 973 DGPL-...-P-A-GF-B
18 161 974 DGPL-...-PPV-A-GF-B
25 161 786 DGPL-...-PPV-A-GF-B
32 161 787 DGPL-...-PPV-A-GF-B
40 161 788 DGPL-...-PPV-A-GF-B
50 161 789 DGPL-...-PPV-A-GF-B
63 161 790 DGPL-...-PPV-A-GF-B
80 161 791 DGPL-...-PPV-A-GF-B
DGPL-...-KF with slide and recircu- 8 191 975 DGPL-...-P-A-KF-B
lating ball bearing guide 12 161 976 DGPL-...-P-A-KF-B
18 161 977 DGPL-...-PPV-A-KF-B
25 161 792 DGPL-...-PPV-A-KF-B
32 161 793 DGPL-...-PPV-A-KF-B
40 161 794 DGPL-...-PPV-A-KF-B
50 161 795 DGPL-...-PPV-A-KF-B
63 161 796 DGPL-...-PPV-A-KF-B
80 161 797 DGPL-...-PPV-A-KF-B
-H- Note
These standard drives DGP/DGPL are
not free of copper and Teflon (CT-free).
1.3
New -V-Ordering data
01/04 – Subject to change – Products 2001 1.3-9Festo AG & Co.
Pneumatic linear drive units DGP/DGPLRodless drive units
Ordering data for the modular pneumatic linear drive units DGP-.../DGPL-.../DGPL-...-HD...
Size
Pneumatic linear drives
8 12 18 25 32 40 50 63 80 Tick or enter
data
Mandatory entries Code X Entry
Part No. 175 131 175 132 175 133 175 134 175 135 175 136 175 137 175 138 175 139 –
Tick X –
Function Description/characteristics
Drive function Pneumatic linear drive unit with driver DGP
Pneumatic linear drive unit with slide DGPL
Piston� [mm] 8 12 18 25 32 40 50 63 80 –
Stroke length [mm] 10 ...
1000
10 ...
1500
10 ...
1800
10 ... 3000 -...
Type of cushioning 1) – -Pyp g
– Adjustable end-position cushioning at both ends -PPV
Sensing For contactless sensing (SME/SMT-8)2) -A X -A
Generation B series -B X -B
Optional entries
Guide3) Plain-bearing guide -GF
Recirculating ball bearing guide -KF
Heavy-duty guide HD18 – 10 ...
17104)– -HD18
HD25 – 10 ...
16404)10 ...
21604)– -HD25
HD40 – 10 ... 21104) – -HD40
Clamping unit – Front – -KVp g
– Rear – -KH
– Underneath – -KU
Basic design5) Driver/slide, standard – -GKg
Driver/slide, extended – -GV
Slide attachment Slide at rear6 -SH
position Slide at front -SV
Supply port –7) Supply ports on both sides -D2
Accessories8) Moment compensator FKP assembled -FK
(DGP only) Load inverter – -AK -V-
Special materials Free of copper, Teflon and silicone9) -CT -V-
Protected version10) – Dust-proof version – -GA -V-
1) Flexible cushioning rings in the end positions
2) SMT-8 not permissible for sizes 8 and 12
3) Mandatory entry for DGPL
4) Stroke length min. – max. [mm]
5) GK: Standard for DGP/DGPL (all�)
Optional entry for HD...
GV: Can only be selected for DGP/DGPL
6) SH is standard for DGPL
7) D2 is standard for sizes 8 and 12
8) Not permissible for KV and KH
9) Not permissible for KV, KH, KU and FK
10) Stroke lengths up to max. 2000 mm
available
Not permissible for GF, KU and GV
Example of ordering code
175 135 DGPL-32-1000-PPV-A-B-KF-KU-SV-D2
175 135 = Module no.
DGPL = Type
32 = Piston� [mm]
1000 = Stroke length [mm]
PPV = Adjustable end-posi-
tion cushioning
A = Contactless end-posi-
tion sensing
B = B series
KF = Recirculating ball
bearing guide
KU = Clamping unit under-
neath
SV = Slide at front
D2 = Supply port at both
sides
Additional functions� 1.3-6
Accessories� 1.3-10
1.3
-V- NewProduct range overview
Products 2001 – Subject to change – 01/081.3-10 Festo AG & Co.
Pneumatic linear drive units DGP/DGPLRodless drive units
Accessories – Slot covers B/S
– Slot nuts X/Y
– Centring pins/sleeves Z
– Central mounting Q
– Central support M
– Foot mounting F
– Shock absorber kits C/E -V-
– Proximity sensor/plug sockets G/H/
I/J/N/V
Pneumatic linear drives
with driver DGPB/S
G/H/I/J/N/V
Y
M
F
Pneumatic linear drives
with slide DGPL C/E
Q
X
B/S
G/H/I/J/N/V
M
F
Z
Y
1.3
New -V-Ordering data
01/04 – Subject to change – Products 2001 1.3-11Festo AG & Co.
Pneumatic linear drive units DGP/DGPLRodless drive units
Accessories for the modular pneumatic linear drive units with driver and slide DGP-.../DGPL-...
Size
Pneumatic linear drives
8 12 18 25 32 40 50 63 80 Tick or enter
data
Function Description/characteristics Code X Entry
Accessories Supplied separately :ZUB- X :ZUB-
Slot cover to keep dirt out of
sensor slot (quantity 1 ... 10)
2 pieces, 500 mm each
ABP-5-S
...S
Slot cover to keep dirt out of
mounting slot (quantity 1 ... 10)
– 2 pieces, 500 mm
each
ABP-5
2 pieces, 500 mm each
ABP-8
...B
Slot nut for slide
(quantity 1 ... 10)
– NSTL-25 NSTL-32 NSTL-40 NSTL-50 NSTL-63 NSTL-80 ...X
Slot nut for profile barrel
(quantity 1 ... 10)
– NST-5-M5 NST-8-M6 ...Y
Centring pin/sleeve
Pack of 10
(quantity 1 ... 9)
ZBS-5 ZBH-9 ...Z
Central support (quantity 1 ... 10) MUP-8/12 MUP-18/25 MUP-32 MUP-40 MUP-50 MUP-63 MUP-80 ...M
Central mounting
(quantity 1 ... 10)
– SLZZ-
16/10
SLZZ-25/16 SLZZ-50/40 ...Q
Foot mounting
(quantity 1 ... 10)
HP-8 HP-12 HP-18 HP-25 HP-32 HP-40 HP-50 HP-63 HP-80 ...F
Proximity sensor, Reed contact with cable, 2.5 m long (SME-8-K-LED-24) ...Gy ,
magnetic Reed contact with plug, cable length 0.3 m (SME-8-S-LED-24) ...Hg
(quantity 1 ... 10) – Contactless, PNP, with cable, 2.5 m long, SMT-8-PS-K-LED-24 ...I(q y )
– Contactless, PNP, with plug, cable length 0.3 m, SMT-8-PS-S-LED-24 ...J
Reed contact with cable, 7.5 m long, NC contact (SME-8-O-K-LED-24) ...N
Plug socket with cable
(quantity 1 ... 10)
for proximity sensor with plug, cable length 2.5 m (SIM-M8-3GD-2.5-PU) ...V
Shock absorber kit Retainer ...C
(retainer + shock absorber) KYP-8 KYP-12 KYP-18 KYP-25 KYP-32 KYP-40 KYP-50 KYP-63 KYP-80( )
(quantity 1 ... 10) Shock absorber(q y )
YSR-5-5-C YSR-8-8C YSR-12-12-C YSR-16-20-C YSR-20-25-C
for protected version GA
(quantity 1 ... 10)
– DG-GA-
25-YSR1)DG-GA-
32-YSR1)DG-GA-
40-YSR1)– ...E -V-
1) Only for mounting in the end positions. In conjunction with retainer KYP, the shock absorber can also be mounted under the cover profile.
Accessories for heavy-duty guide HD...� 1.3-12
Example of ordering code
175 135 DGPL-32-1000-PPV-A-B-KF-KU-SV-D2 :ZUB-2S2B2Y1ZMFGC
175 135 = Module no.
DGPL = Type
32 = Piston� [mm]
1000 = Stroke length [mm]
PPV = Adjustable end-posi-
tion cushioning
A = Contactless end-posi-
tion sensing
B = B series
KF = Recirculating ball
bearing guide
KU = Clamping underneath
SV = Slide at front
D2 = Supply port at both
ends
ZUB = Accessories supplied
separately
2S = 2 x slot covers for
sensor slots
2B = 2 x slot covers for
mounting slots
2Y = 2x slot nuts
1Z = 10 centring sleeves
M = Central support
F = Foot mounting
G = Proximity sensor
C = Shock absorber kit
1.3
Product range overview
Products 2001 – Subject to change – 01/081.3-12 Festo AG & Co.
Pneumatic linear drive units DGP/DGPLRodless drive units
Accessories – Slot covers B/S
– Slot nuts U/X/Y
– Central mounting Q
– Central support M
– Foot mounting F
– Shock absorber kit D
– Proximity sensor/plug sockets G/H/I/J/N/V
Pneumatic linear drives
with heavy-duty guide
DGPL-...-HD...D
F
Q
X
B/S
G/H/I/J/N/V
M
U/Y
1.3
Ordering data
01/04 – Subject to change – Products 2001 1.3-13Festo AG & Co.
Pneumatic linear drive units DGP/DGPLRodless drive units
Accessories for pneumatic linear drive units with heavy-duty guide DGPL-...-HD...
Size
Heavy-duty guide
HD18 HD25 HD40 Tick or enter
data
Function Description/characteristics Code X Entry
Accessories Supplied separately :ZUB- X :ZUB-
Slot cover to keep dirt out of
sensor slot (quantity 1 ... 10)
2 pieces, 500 mm each
ABP-5-S
...S
Slot cover to keep dirt out of
mounting slot
At side 2 pieces, 500 mm each
ABP-5
2 pieces, 500 mm each
ABP-8
...B
g
(quantity 1 ... 10) Under-
neath
2 pieces, 500 mm each
ABP-5
2 pieces, 500 mm each
ABP-8
Slot nut for slide
(quantity 1 ... 10)
NSTH-18 NSTH-25 NSTH-40 ...X
Slot nut for profile
(quantity 1 ... 10)
At side NST-5-M5 NST-8-M6 ...Y
(q y )
Under-
neath
NST-5-M5 NST-8-M6 ...U
Central support
(quantity 1 ... 10)
MUP-40 MUP-50 ...M
Central mounting
(quantity 1 ... 10)
SLZZ-25/16 ...Q
Foot mounting
(quantity 1 ... 10)
HPP-18 HPP-25 HPP-40 ...F
Proximity sensor, Reed contact with cable, 2.5 m long (SME-8-K-LED-24) ...Gy ,
magnetic Reed contact with plug, cable length 0.3 m (SME-8-S-LED-24) ...Hg
(quantity 1 ... 10) Contactless, PNP, with cable, 2.5 m long, SMT-8-PS-K-LED-24 ...I(q y )
Contactless, PNP, with plug, cable length 0.3 m, SMT-8-PS-S-LED-24 ...J
Reed contact with cable, 7.5 m long, NC contact (SME-8-O-K-LED-24) ...N
Plug socket with cable
(quantity 1 ... 10)
For proximity sensor with plug, cable length 2.5 m (SIM-M8-3GD-2,5-PU) ...V
Shock absorber kit 1)
(quantity 1 ... 10)
YHD-18 YHD-25 YHD-40 ...D
1) Scope of delivery: 2 shock absorbers YSR..., 1 threaded pin (stop), 1 hexagonal nut.
Example of ordering code
175 135 DGPL-32-1000-PPV-A-B-KF-HD25-D2 :ZUB-2S2B2YMFGD
175 135 = Module no.
DGPL = Type
32 = Piston� [mm]
1000 = Stroke length [mm]
PPV = Adjustable end-posi-
tion cushioning
A = Contactless end-posi-
tion sensing
B = B series
KF = Recirculating ball
bearing guide
HD25 = Heavy-duty guide
D2 = Supply port at both
ends
ZUB = Accessories supplied
separately
2S = 2x slot covers for
sensor slots
2B = 2x slot covers for
mounting slots
2Y = 2x slot nuts
M = Central support
F = Foot mounting
G = Proximity sensor
D = Shock absorber kit
1.3
Overview and ordering data
Products 2001 – Subject to change – 01/081.3-14 Festo AG & Co.
Pneumatic linear drive units DGP/DGPLRodless drive units
Accessories
For pneumatic linear drives with driver, slide or heavy-duty guide DGP/DGPL/DGPL-...-HD
Size
Slot cover ABP-...
Mounting slot
Part No. Type
Slot cover ABP-5-S
Sensor slot
Part No. Type
Slot nut NST-...*
for profile barrel
Part No. Type
DGP-... 8 – 151 680 ABP-5-S –
DGPL-... 12
5 5
DGPL-...-HD 18
25
32 151 681 ABP-5 150 914 NST-5-M5
40 151 681 ABP-5
5 9 5 5
50 151 682 ABP-8 150 915 NST-8-M6
63 151 682 ABP-8
5 9 5
80 151 682 ABP-8
Size
Central support MUP-...
Part No. Type
Foot mounting HP-...**
Part No. Type
DGP-... 8 160 909 MUP-8/12 158 470 HP-8
DGPL-... 12
9 9 /
158 471 HP-12
DGPL-...-HD 18 150 736 MUP-18/25 158 472 HP-18
25
5 73 / 5
150 731 HP-25
32 150 737 MUP-32 150 732 HP-32
40 150 738 MUP-40 150 733 HP-40
50 150 739 MUP-50 150 734 HP-50
63 150 800 MUP-63 150 735 HP-63
80 158 455 MUP-80 158 453 HP-80
* Allocated in conjunction with heavy-duty guide DGPL-...-HD...� 1.3-16
** Cannot be used in conjunction with heavy-duty guide DGPL-...-HD... Foot mounting HHP for heavy-duty guide DGPL-...-HD...� 1.3-16
1.3
New -V-Overview and ordering data
01/04 – Subject to change – Products 2001 1.3-15Festo AG & Co.
Pneumatic linear drive units DGP/DGPLRodless drive units
Accessories
For pneumatic linear drives with driver DGP
Size
Moment compensator FKP-...
Part No. Type
Load inverter AK-...
Part No. Type
DGP-... 8 158 473 FKP-8/12 196 103 AK-8 -V-
12
5 73 /
196 104 AK-12 -V-
18 158 474 FKP-18 196 105 AK-18 -V-
25 150 801 FKP-25/32 196 106 AK-25 -V-
32
5 5/3
196 107 AK-32 -V-
40 150 802 FKP-40 196 108 AK-40 -V-
50 150 803 FKP-50/63 196 109 AK-50 -V-
63
5 3 5 / 3
196 110 AK-63 -V-
80 158 457 FKP-80 –
For pneumatic linear drives with slide DGPL
Size
Slot nut NSTL-...
for slide
Part No. Type
Centring pins ZBS-... and
centring sleeves ZBH-...
Part No. Type
Central mounting SLZZ-...
Part No. Type
DGPL-... 8 – 150 928 ZBS-5 –
12
5 9 5
18
25 158 410 NSTL-25 150 927 ZBH-9 150 900 SLZZ-16/10
32 158 411 NSTL-32
5 9 7 9
150 901 SLZZ-25/16*
40 158 412 NSTL-40
5 9 5/
50 158 413 NSTL-50 150 904 SLZZ-50/40
63 158 414 NSTL-63
5 9 5 /
80 161 356 NSTL-80
* Can also be used in conjunction with heavy-duty guide DGPL-...-HD...
1.3
-V- NewOverview and ordering data
Products 2001 – Subject to change – 01/081.3-16 Festo AG & Co.
Pneumatic linear drive units DGP/DGPLRodless drive units
Accessories
For pneumatic linear drives with slide DGPL-...
Shock absorber retainer KYP-... Shock absorber YSR- ... -C
Size
(without shock absorber)
Part No. Type
Weight
[kg]
(to be ordered separately)
Part No. Type
Weight
[kg]
DGPL-... 8 158 905 KYP-8 0.037 158 981 YSR-5-5-C 0.027
12 158 906 KYP-12 0.045
5 9 5 5 7
18 158 907 KYP-18 0.063 34 571 YSR-8-8-C 0.048
25 158 908 KYP-25 0.095 34 572 YSR-12-12-C 0.089
32 158 909 KYP-32 0.130
3 57 9
40 158 910 KYP-40 0.209 34 573 YSR-16-20-C 0.205
50 158 911 KYP-50 0.336
3 573 5
63 158 912 KYP-63 0.608 35 574 YSR-20-25-C 0.336
80 158 913 KYP-80 0.774
35 57 5 33
Shock absorber YSRW-... Shock absorber kit DG-GA-...-YSR
Size
(to be ordered separately)
Part No. Type
Weight
[kg]
(for protected version GA)
Part No. Type
DGPL-... 8 191 192 YSRW-5-8 0.008 –
12
9 9 5
18 191 194 YSRW-8-14 0.034
25 191 196 YSRW-12-20 0.078 192 875 DG-GA-25-YSR -V-
32
9 9 7
192 876 DG-GA-32-YSR -V-
40 191 197 YSRW-16-26 0.190 192 877 DG-GA-40-YSR -V-
50
9 97 9
–
63 191 198 YSRW-20-34 0.330
80
9 9 3 33
For pneumatic linear drives with heavy-duty guide DGPL-...-HD...
Size
Slot nut
NST-...
Part No. Type
Slot nut
NSTH-...
Part No. Type
Foot mounting
HHP-...
Part No. Type
Shock absorber kit YHD-...
Part No. Type
Shock absorber
YSRW-...
Part No. Type
HD... 18 150 914 NST-5-M5* 161 020 NSTH-18 161 993 HHP-18 174 544 YHD-18 191 194 YSRW-8-14
25
5 9 5 5
161 021 NSTH-25 161 994 HHP-25 174 545 YHD-25 191 196 YSRW-12-20
40 150 915 NST-8-M6* 161 022 NSTH-40 161 995 HHP-40 174 546 YHD-40 191 197 YSRW-16-26
* Applies to side mounting of the heavy-duty guide DGPL-...-HD...
1.3
Overview and ordering data
01/04 – Subject to change – Products 2001 1.3-17Festo AG & Co.
Pneumatic linear drive units DGP/DGPLRodless drive units
Accessories
Proximity sensor for end-position sensing
Proximity sensor (reed contact) Proximity sensor (contactless)
Part No. Type Variant Part No. Type Variant
150 855 SME-8-K-LED-24 24 V DC, with cable, 2.5 m 150 864 SMT-8-PS-K-LED-24 24 V DC, with cable, 2.5 m, PNP
175 404 SME-8-K5-LED-24 24 V DC, with cable, 5 m 150 862 SMT-8-NS-K-LED-24 24 V DC, with cable, 2.5 m, NPN
152 820 SME-8-K-LED-230 230 V AC, with cable, 2.5 m 175 405 SMT-8-PS-K5-LED-24 24 V DC, with cable, 5 m, PNP
150 857 SME-8-S-LED-24 24 V DC, with plug 175 436 SMT-8-PS-K-LED-24-B 24 V DC, with cable, 2.5 m, PNP
160 251 SME-8-O-K-LED-24 24 V DC, with cable, NC contact 171 180 SMT-8-NS-K-LED-24-B 24 V DC, with cable, 2.5 m, NPN
175 434 SMT-8-PS-K5-LED-24-B 24 V DC, with cable, 5 m, PNP
150 865 SMT-8-PS-S-LED-24 24 V DC, with plug, PNP
150 863 SMT-8-NS-S-LED-24 24 V DC, with plug, NPN
175 484 SMT-8-PS-S-LED-24-B 24 V DC, with plug, PNP
171 181 SMT-8-NS-S-LED-24-B 24 V DC, with plug, NPN
Proximity sensor (reed contact), externally mountable* Proximity sensor (contactless)*
Part No. Type Variant Part No. Type Variant
171 161 SMEO-8E-K-LED-24 24 V DC, with cable, 2.5 m 171 177 SMTO-8E-PS-K-LED-24 24 V DC, with cable, 2.5 m, PNP
171 159 SMEO-8E-K-LED-230 230 V AC, with cable, 2.5 m 171 165 SMTO-8E-NS-K-LED-24 24 V DC, with cable, 2.5 m, NPN
171 162 SMEO-8E-K5-LED-230 230 V AC, with cable, 5 m 175 435 SMTO-8E-PS-K5-LED-24 24 V DC, with cable, 5 m, PNP
171 163 SMEO-8E-S-LED-24 24 V DC, with plug 171 178 SMTO-8E-PS-S-LED-24 24 V DC, with plug, PNP
171 164 SMEO-8E-M12-LED-24 24 V DC, with plug 171 166 SMTO-8E-NS-S-LED-24 24 V DC, with plug, NPN
171 160 SMEO-8E-M12-LED-230 230 V AC, with plug 171 179 SMTO-8E-PS-S-M12-LED-24 24 V DC, with plug, PNP
171 176 SMTO-8E-NS-S-M12-LED-24 24 V DC, with plug, NPN
1
3
2
Proximity sensor (contactless), welding field resistant design* Pneumatic switch*
Part No. Type Variant Part No. Type Variant
175 824 SMTSO-8E-PS-M12-LED 24 V DC, with plug, PNP 178 563 SMPO-8E
175 825 SMTSO-8E-NS-M12-LED 24 V DC, with plug, NPN
* Required kit 178 230 SMB-8E
1.3
Technical data
Products 2001 – Subject to change – 01/081.3-18 Festo AG & Co.
Pneumatic linear drive units DGP/DGPLRodless drive units
DGP
Pneumatic linear drives Type DGP
Size 8 12 18 25 32 40 50 63 80
Pneumatic data Min. operating pressure [bar] 3.5 2.5 2 1.5
Max. operating pressure [bar] 8
Connections M5 G� G� G� G�
Mechanical data Design Pneumatic linear drive unit with driver
Guide –
Size Piston� [mm] 8 12 18 25 32 40 50 63 80
Stroke length 10 ... 1000 [mm]g
10 ... 1500 [mm]
10 ... 1800 [mm]
10 ... 3000* [mm]
Cushioning length [mm] – 16 18 20 30 83
Impact energy [Nm] 0.3 –
Effective force at 6 bar (theoretical) [N] 30 68 153 295 483 754 1178 1870 3016
Max. speed DGP [m/s] –p
DGP [m/s] –
Moving load DGP [kg] 0.04 0.06 0.08 0.18 0.32 0.55 1.05 1.76 5.00
Weights Basic weight DGP [kg] 0.13 0.25 0.46 0.84 1.55 2.65 5.88 9.1 17.3g g
Per 10 mm stroke DGP [g] 5 8 16 36 41 57 111 148 158
Materials Drive unit Profile barrel Anodised aluminium
End cap Anodised aluminium
Cover strip PU Steel** PU
Driver Steel** Anodised aluminium
Seals NBR, PU
Guide unit Profile –
End cap –
Slide –
Guide rail –
–
Ambient conditions Temperature range [�C] –10 ... +60
* With effective strokes of over 2000 mm the installation of the drive unit must be with the sealing strip facing down; longer strokes available on request.
** Stainless steel
1.3
Technical data
01/04 – Subject to change – Products 2001 1.3-19Festo AG & Co.
Pneumatic linear drive units DGP/DGPLRodless drive units
DGPL
Pneumatic linear drives Type DGPL
Size 8 12 18 25 32 40 50 63 80
Pneumatic data Min. operating pressure [bar] 3.5 2.5 2 1.5
Max. operating pressure [bar] 8
Connections M5 G� G� G� G�
Mechanical data Design Pneumatic linear drive unit with slide
Guide Plain-bearing guide (GF) or recirculating ball bearing guide (KF)
Size Piston� [mm] 8 12 18 25 32 40 50 63 80
Stroke length 10 ... 1000 [mm]g
10 ... 1500 [mm]
10 ... 1800 [mm]
10 ... 3000* [mm]
Cushioning length [mm] – 16 18 20 30 83
Impact energy [Nm] 0.3 –
Effective force at 6 bar (theoretical) [N] 30 68 153 295 483 754 1178 1870 3016
Max. speed DGPL-...-GF [m/s] 1p
DGPL-...-KF [m/s] 3
DGPL-...-GA [m/s] 3
Moving load DGPL-...-GF [kg] 0.06 0.10 0.23 0.37 0.53 0.96 1.77 2.79 7.10g
DGPL-...-KF [kg] 0.08 0.14 0.29 0.43 0.58 1.15 1.96 3.22 7.50
DGPL-...-GA [kg] – – – 0.91 – – –
Weights Basic weight DGPL-...-GF [kg] 0.09 0.14 0.30 1.37 2.39 3.89 8.6 13.54 25.4g g
DGPL-...-KF [kg] 0.12 0.19 0.37 1.52 2.72 4.48 9.6 15.37 28.7
DGPL-...-GA [kg] – – – 1.69 – – –
Per 10 mm stroke DGPL-...-GF [g] 8 12 22 42 51 72 132 181 162
DGPL-...-KF [g] 9 14 26 53 69 97 167 236 270
DGPL-...-GA [g] – – – 26 – – –
Materials Drive unit Profile barrel Anodised aluminium
End cap Anodised aluminium
Cover strip PU Steel** PU
Driver Steel** Anodised aluminium
Seals NBR, PU
Guide unit Profile –
End cap –
Slide Anodised aluminium
Guide rail GF Anodised aluminium
KF Steel Corrosion resistant steel
Ambient conditions Temperature range [�C] –10 ... +60
* With effective strokes of over 2000 mm the installation of the drive unit must be with the sealing strip facing down; longer strokes available on request.
** Stainless steel
1.3
Technical data
Products 2001 – Subject to change – 01/081.3-20 Festo AG & Co.
Pneumatic linear drive units DGP/DGPLRodless drive units
DGPL-...-HD...
Pneumatic linear drives Type DGPL-...-HD...
Size 18 25 32 40
Heavy-duty guide HD HD18 HD25 HD25 HD40 HD40 HD40
Pneumatic data Min. operating pressure [bar] 2 1.5
Max. operating pressure [bar] 8
Connections M8 G� G�
Mechanical data Design Pneumatic linear drive with heavy-duty guide
Guide Recirculating ball bearing guide
Size Piston� [mm] 18 25 32 40
Stroke length 10 ... 1710 [mm]g
10 ... 1640 [mm]
10 ... 2160 [mm]
10 ... 2110 [mm]
Cushioning length [mm] –
Impact energy [Nm] –
Effective force at 6 bar (theoretical) [N] 153 295 483 754
Max. speed [m/s] 3
Moving load [kg] 0.530 1.860 1.960 3.480 3.615 3.850
Weights Basic weight DGPL-...-HD... [kg] 3.7 4.4 5.1 13.9 14.4 15.4g g
Per 10 mm stroke DGPL-...-HD... [g] 89 133 152 212 217 233
Materials Drive unit Profile barrel Anodised aluminium
End cap Anodised aluminium
Cover strip Steel**
Driver Anodised aluminium
Seals NBR, PU
Guide unit Profile Anodised aluminium
End cap Anodised aluminium
Slide Anodised aluminium
Guide rail Steel
Ambient conditions Temperature range [�C] –10 ... +60
** Stainless steel
1.3
Technical data
01/04 – Subject to change – Products 2001 1.3-21Festo AG & Co.
Pneumatic linear drive units DGP/DGPLRodless drive units
Permissible maximum piston speed
dependent on the load to be moved.
The data applies to:
– horizontal mounting positions,
applied load above
Operating range of the integrated
end-position cushioning
Pneumatic linear drives with driver DGP with slide DGPL
The end-position cushioning must be
adjusted to ensure jerk-free
operation.
If the operating conditions are out-
side the permissible range, the load
to be moved must be externally
cushioned using suitable equipment
(shock absorbers, stops, etc), prefera-
bly at the centre of gravity of the
mass.
Load Load
– rmax. = 20 mm
for piston� 8 ... 18 mm
– rmax. = 50 mm
for piston� 25 ... 80 mm
(data for greater load distances on
request)
-H- Note
Maximum speed for plain-bearing
guides DGPL-...-GF = 1 m/s
Use external cushioning systems (e.g.
shock absorbers) to operate pneu-
matic linear drive units DGP-... at a
higher piston speed.
Load to be moved m [kg]
Maximumpistonspeedv[m/s]
vmax. for DGPL-...-GF
-H- Note
Evenness of applied loads for pneu-
matic linear drive units with slide
DGPL or with heavy-duty guide
DGPL-...-HD:
To avoid distortion or loosening of the
guide elements, the bearing surface
of the assembly must maintain a flat-
ness of at least 0.03 mm.
1.3
Technical data
Products 2001 – Subject to change – 01/081.3-22 Festo AG & Co.
Pneumatic linear drive units DGP/DGPLRodless drive units
Characteristic load values
Software tools on CD-ROM:
Pro Drive
-H- Note
The forces and torques indicated
must not be exceeded in the dynamic
range.
Special attention must be paid to the
cushioning phase.
with driver DGP
The forces and torques specified refer
to the centre of the profile barrel inter-
nal diameter (piston).
If the pneumatic linear drive units
DGP... are simultaneously subjected
to several of the forces and torques
listed below, the following equations
must be satisfied in addition to the
indicated maximum loads.
0, 4× FzFzmax.
+Mx
Mxmax.+
My
Mymax.+ 0, 2 ×
MzMzmax.
≤ 1
MzMzmax.
≤ 1FzFzmax.
≤ 1
Characteristic load values Type DGP
for pneumatic linear drives Size 8 12 18 25 32 40 50 63 80
Driver/slide, standard Force due to applied Fymax. [N] – – – – – – – – – 1/ ,
DGP...-...-GK
pp
load Fzmax. [N] 38 59 120 330 480 800 1200 1600 5000 2
Lateral torque Mxmax. [Nm] 0.15 0.3 0.5 1 2 4 7 8 32 3
Longitudinal torque Mymax. [Nm] 2 4 11 20 40 60 120 120 750 4
Torque Mzmax. [Nm] – – 1 3 5 8 15 24 140 5
Driver/slide, extended Force due to applied Fymax. [N] – – – – – – – – – 6/ ,
DGP...-...-GV
pp
load Fzmax. [N] – – 120 330 480 800 1200 – – 7
Lateral torque Mxmax. [Nm] – – 1 2 4 8 14 16 – 8
Longitudinal torque Mymax. [Nm] – – 22 40 80 120 240 240 – 9
Torque Mzmax. [Nm] – – 2 6 10 16 30 48 – 10
* All values indicated for pneumatic linear drive units with slide and plain-bearing guide DGPL-...-GF are based on a speed of 0.2 m/s.
1.3
Technical data
01/04 – Subject to change – Products 2001 1.3-23Festo AG & Co.
Pneumatic linear drive units DGP/DGPLRodless drive units
Characteristic load values
with slide DGPL with heavy-duty guide DGPL-...-HD...
The forces and torques specified refer
to the centre of the guide rail.
The specified values must be ob-
served, especially when using the
protected version (variant GA).
The specified forces and torques refer
to the centre of the heavy-duty guide.
Fy
Fymax.+
FzFzmax.
+Mx
Mxmax.+
My
Mymax.+
MzMzmax.
≤ 1
Maximum speed:
– for plain-bearing guide (GF): vmax. = 1 m/s
– for recirculating ball bearing guide (KF): vmax. = 3 m/s
Fy
Fymax.+
FzFzmax.
+Mx
Mxmax.+
My
Mymax.+
MzMzmax.
≤ 1
Maximum speed: vmax. = 3 m/s
Maximum acceleration: amax. = 50 m/s2
Plain-bearing guide: DGPL-...-GF* Recirculating ball bearing guide: DGPL-...-KF** DGPL-...-HD
8 12 18 25 32 40 50 63 80 8 12 18 25 32 40 50 63 80 HD18 HD25 HD40
1 150 300 340 430 430 1010 1010 2000 2000 255 565 930 3080 3080 7300 7300 14050 14050 1820 5400 5400
2 150 300 340 430 430 1010 1010 2000 2000 255 565 930 3080 3080 7300 7300 14050 14050 1820 5600 5600
3 0.5 1.3 2.2 5.4 8.5 23 32 74 100 1 3 7 45 63 170 240 580 745 70 260 375
4 2 5 10 14 18 34 52 140 230 3.5 9 23 85 127 330 460 910 1545 115 415 560
5 2 5 10 14 18 34 52 140 230 3.5 9 23 85 127 330 460 910 1545 112 400 540
6 – – 330 400 395 930 870 1780 – – – 930 3080 3080 7300 7300 14050 – – – –
7 – – 330 400 395 930 870 1780 – – – 930 3080 3080 7300 7300 14050 – – – –
8 – – 2 5 8 21 28 66 – – – 7 45 63 170 240 580 – – – –
9 – – 18 25 30 58 83 235 – – – 45 170 250 660 920 1820 – – – –
10 – – 18 25 30 58 83 235 – – – 45 170 250 660 920 1820 – – – –
* All values indicated for pneumatic linear drive units with slide and plain-bearing guide DGPL-...-GF are based on a speed of 0.2 m/s.
** These values also apply to variant GA.
1.3
Technical data
Products 2001 – Subject to change – 01/081.3-24 Festo AG & Co.
Pneumatic linear drive units DGP/DGPLRodless drive units
Maximum permissible static and
dynamic characteristic load values
with standard slide and plain-bearing guide DGPL-...-GF-GK-S...
The pneumatic linear drive unit with Permissible forcesp
plain-bearing guide DGPL-...-GF is
designed for a maximum speed of
1 m/s. At higher speeds and vertical
application, it is recommended that
pneumatic linear drive units with re-
circulating ball bearing guides
DGPL-...-KF are used as an alterna-
tive.
F y,Fz[N]
Maximum speed [m/s]
Permissible torques
Mx,M
y,Mz[Nm]
Maximum speed [m/s]
1.3
Technical data
01/04 – Subject to change – Products 2001 1.3-25Festo AG & Co.
Pneumatic linear drive units DGP/DGPLRodless drive units
with extended slide and plain-bearing guide DGPL-...-GF-GV-S... Maximum permissible static and
dynamic characteristic load values
Permissible forces
Maximum speed [m/s]
F y,Fz[N]
Permissible torques
Maximum speed [m/s]
Mx,M
y,Mz[Nm]
1.3
Dimensions
Products 2001 – Subject to change – 01/081.3-26 Festo AG & Co.
Pneumatic linear drive units DGP/DGPLRodless drive units
DGP-8/-12-...-GK
with standard driver
DGPL-8/-12-...-GK
with standard slide
1 1 supply port on each end cap,
option of three sides
3 Mounting holes for foot
mounting HP
5 Drilled hole for centring pin
ZBS-5
+ = plus stroke length
1.3
Dimensions
01/04 – Subject to change – Products 2001 1.3-27Festo AG & Co.
Pneumatic linear drive units DGP/DGPLRodless drive units
Profile barrel DGP...-8 DGP...-12 DGP-8/12-...-GK
DGPL-8/12-...-GK
2 Sensor slot for proximity sensor
B1 B2 B3
±0.1
B4 B5 B6 B7 B8 B10
8 20.5 24 8 16 4 13 21.5 32 11
12 25 29 21 6 18.6 22 36.5 16.1
B11 B12 D1
�
H7
D2
�
D3
�
+0.1
D4 D6 EE H1 H2 H3 H4
8 31.5 3 4 2 3.2 M3 M3 M5 30 26.5 23.2 8
12 37
3 3 3 3 5
35.5 32 28.7 10.5
H5 H6 H7 H8 H9 H10 J2 J4 L1 L2 L3
8 9.75 24.5 35.5 19.5 12 0.5 1 0.5 100 50 5.2
12 12.5 30 43.5 25 14
5
3.5 3.5 125 62.5 5.1
L5 L6 L7
±0.1
L8
±0.1
L9 L10 L17
+1
T1 T2 T3 T4
max.
8 10.7 52 15 30 11.8 8 52 7 1.5 6 7
12 13.6 64
5 3
15.3 11.6 64
7 5
8.5
1.3
Dimensions
Products 2001 – Subject to change – 01/081.3-28 Festo AG & Co.
Pneumatic linear drive units DGP/DGPLRodless drive units
DGP-18-...-GK
with standard driver
Profile barrel
DGP-18-...-GV
with extended driver
1 Supply ports at one end, option
of three sides of an end cap
(D2 variant: supply port at both
ends, option of three sides per
end cap)
2 Sensor slot for proximity sensor
3 Mounting holes for foot
mounting HP
4 Regulating screw for adjustable
end-position cushioning
+ = plus stroke length
1.3
Dimensions
01/04 – Subject to change – Products 2001 1.3-29Festo AG & Co.
Pneumatic linear drive units DGP/DGPLRodless drive units
DGPL-18-...-GK
with standard slide
DGPL-18-...-GV
with extended slide
5 Drilled hole for centring pin
ZBS-5
+ = plus stroke length
1.3
Dimensions
Products 2001 – Subject to change – 01/081.3-30 Festo AG & Co.
Pneumatic linear drive units DGP/DGPLRodless drive units
DGP-25-...-GK
with standard driver
Profile barrel
DGP-25-...-GV
with extended driver
1 Supply ports at one end, option
of three sides of an end cap
(D2 variant: supply port at both
ends, option of three sides per
end cap)
2 Sensor slot for proximity sensor
3 Mounting holes for foot
mounting HP
4 Regulating screw for adjustable
end-position cushioning
+ = plus stroke length
1.3
Dimensions
01/04 – Subject to change – Products 2001 1.3-31Festo AG & Co.
Pneumatic linear drive units DGP/DGPLRodless drive units
DGPL-25-...-GK
with standard slide
DGPL-25-...-GV
with extended slide
5 Drilled holes for centring sleeve
ZBH-9
6 Mounting slot for slot nut
NSTL-25
7 Drilled hole for central mounting
SLZZ
+ = plus stroke length
DGPL-25-...-GA
protected version
1.3
Dimensions
Products 2001 – Subject to change – 01/081.3-32 Festo AG & Co.
Pneumatic linear drive units DGP/DGPLRodless drive units
DGP-32 ... 80-...-GK
with standard driver
DGP-80 DGP-32 ... 63
DGP-32 ... 80-...-GV
with extended driver
Profile barrel
DGP-32 DGP-40 DGP-50 DGP-63 DGP-80
1.3
Dimensions
01/04 – Subject to change – Products 2001 1.3-33Festo AG & Co.
Pneumatic linear drive units DGP/DGPLRodless drive units
DGP-32- ... 80-...-GK
DGP-32- ... 80-...-GV
1 Supply ports at one end, option
of three sides of an end cap
(D2 variant: supply port at both
ends, option of three sides per
end cap)
2 Sensor slot for proximity sensor
3 Mounting holes for foot
mounting HP
4 Regulating screw for adjustable
end-position cushioning
6 Mounting slot for slot nut NSTL
+ = plus stroke length
B1 B2 B3
+0.2
B4 B5 B6 B11 D2
�
D3
�
+0.2
D4 D5
�
H10
D6
32 54 35.8 19 46 21 40 9.5 4.3 5.2 M5 8 M5
40 64 45.7 21 53 28 49
9 5 3
6.5 M6 10
5
50 90 69.2 24 76 44 72 12 6.3 8.5 M8 12 M6
63 106 84.8 89 83
3 5
M8
80 130 102.5 36 – – – – – 12.2 M12 20 –
EE H1 H2 H3 H4 H5 H6 J1 J2
32 G� 72 66 62 23 27 5.8 19 4.2
40 G� 86 78 71.8 26.5 32 7.7 22 5
50
�
115 106 99 36 45 9.7 31.8 6.8
63 G� 131 122 115 44.5 53
9 7
36 8
80 G� 174 158 140.5 51 65 –
3
J3 J4 L1
+0.9/–0.2
L2
+0.3/–0.6
L3 L4 L5 L6 L7 L8 L9
32 14 4.7 250 125 17 8.5 31 135 50 ±0.1 100 ±0.1 30 ±0.1
40 21 9.1 300 150 11.5 11.5
3
171 70 ±0.1 130 ±0.1 40 ±0.1
50 29.3 6 350 175 14 14 34 206 80 ±0.1 150 ±0.1 50 ±0.1
63 31 14 400 200
3
234 110 ±0.1 190 ±0.1 70 ±0.1
80 33.3 3.6 520 260 19 19 45 334 180 ±0.15 230 ±0.15 115 ±0.15
L10
±0.15
L11
+0.9/–0.2
L12
+0.3/–0.6
L13
±0.1
L14
±0.1
L15
±0.1
L16
±0.1
L22 T1 T2 T3
32 – 380 190 180 – 160 230 265 13.2 3 7.5
40 470 235 160 250 220 – 341
3
4 10.5
50 550 275 280 – 250 350 406 15.2 6 12.5
63 650 325 380 310 430 484 21.2
5
80 60 – – – – – – – – 19
1.3
Dimensions
Products 2001 – Subject to change – 01/081.3-34 Festo AG & Co.
Pneumatic linear drive units DGP/DGPLRodless drive units
DGPL-32 ... 80-...-GK
with standard slide
DGPL-32 ... 80-...-GV
with extended slide
DGPL-32/40-...-GA
protected version
5 Drilled holes for centring sleeve
ZBH-9
6 Mounting slot for slot nut NSTL
7 Drilled hole for central mounting
SLZZ
+ = plus stroke length
Basic dimensions� 1.3-32
1.3
Dimensions
01/04 – Subject to change – Products 2001 1.3-35Festo AG & Co.
Pneumatic linear drive units DGP/DGPLRodless drive units
DGPL-32 ... 80-...-GK
DGPL-32 ... 80-...-GV
DGPL-32/40-...-GA
B7 B8 B9 B10
±0.03
B12 B14 D1 H1
32 63 79 47 ±0.15 20 112.1 67.6 – 72
40 78.5 96.5 55 ±0.2 137.6 79.6 M5 86
50 97 122 72 ±0.2 40 – – – 115
63 121 142 90 ±0.25 131
80 151.5 188 112 +0.5/–0.2 174
H7 H8 H10 H11 H12 H13 L1
+0.9/–0.2
L2
+0.3/–0.6
32 77.5 18.5 93.1 – 49.5 34.1 250 125
40 90.5 20 106.6 23.1 54 36.1 300 150
50 122.5 26 – – – – 350 175
63 144.5 30 400 200
80 175 36.5 520 260
L17 L18
±0.03
L19
±0.03
L20 L21
±0.1
L23 L24 L25 T4
max.
T5
32 131 +0.2 40 – 261 40 131 – – 12.5 –
40 167 +0.2 40 337 167 150 58
5
7
50 202 +0.2 402 80 – – – 18.5 –
63 230 +0.2 480 120 20.5
80 320 –0.3 – – 27
1.3
Dimensions
Products 2001 – Subject to change – 01/081.3-36 Festo AG & Co.
Pneumatic linear drive units DGP/DGPLRodless drive units
DGPL-18 ... 40-...-HD...
with heavy-duty guide
Profile
1 Mounting slot for slot nut NSTH
2 Mounting slot for slot nut NST
3 Sensor slot for proximity sensor
4 Central mounting SLZZ
5 Slot nut NSTH
6 Threads for shock absorber YHD
or YSR-...-C
7 Threads for threaded pin (shock
absorber kit)
8 Rubber buffer
9 Supply ports at one end (D2 vari-
ant: supply port at both ends)
+ = plus stroke length
B1 B2
±0.2
B3 B4 B5 D1 D2 D3
�
G7
D4
DGPL-18-HD18 80 ±0.3 85 116 40 36 M5 M12x1 25 M6
DGPL-18-HD25 100 ±0.3 114 144 48 56 +0.5 M8 M16x1
5
M8
DGPL-25-HD25
5
DGPL-25-HD40 140 ±0.35 156 185 54 68 M22x1.5
DGPL-32-HD40
5 5 5 5
DGPL-40-HD40
D5 H1 H2 H3 H4 H5 H6 H7 H8
DGPL-18-HD18 M5 69.9 12.8 19.5 ±0.1 14 42.3 5.9 8.7 20x45°
DGPL-18-HD25 G� 93.5 18.5 25 ±0.2 21 52.8 9 9.75 30x45°
DGPL-25-HD25
� 93 5 5 5 5 9 9 75 3 5
DGPL-25-HD40 124.5 21 48 ±0.2 35 82.8 5.5 15.5 35x45°
DGPL-32-HD40
5 35 5 5 5 5 35 5
DGPL-40-HD40
H9 H10 H12 L1 L2 L4 L5 L8 T1
DGPL-18-HD18 68 0.8 49 240 120 15 25 160 3.5
DGPL-18-HD25 90 2 63 310 155
5
35 210
3 5
DGPL-25-HD25
9 3 3 55 35
DGPL-25-HD40 120 89 354 177 32 260 4
DGPL-32-HD40
9 35 77 3
DGPL-40-HD40
1.3
Dimensions
01/04 – Subject to change – Products 2001 1.3-37Festo AG & Co.
Pneumatic linear drive units DGP/DGPLRodless drive units
Moment compensator FKP
for DGP-8 ... 18
for DGP-25 ... 80
B6 B7 B8 B9 D1
�
D4
�
D5 H2 H4 L2 L10 L11 L12
8 – – 18.5 22 4 9 M3 26.5 35.5 50 40 50 20
12
5 9 3
32 41 62.5
5
18 26 30 6 9 M4 43.8 57.8 75 40 70
25 20 40 54 50 8 5.5 M5 57 75 100 66 80 –
32
5 5 5 5 5
66 84 125
40 24 44 58 60 10 6.5 M6 78 99 150 76 90
50 23 51 71 63 12 9 M8 106 130 175 102 122
63
3 5 7 3 9
122 146 200
80 – – – 94 20 – – 158 194.5 258 – –
1.3
Dimensions
Products 2001 – Subject to change – 01/081.3-38 Festo AG & Co.
Pneumatic linear drive units DGP/DGPLRodless drive units
Load inverter AK
(Code AK)
for DGP-8 ... 63
1 Socket head screw DIN 912
B1 B2 D1 H1 H2 H3 H4 L1 L2 L3 L4 L5 1
8 20.3 16.5 M3 41.5 23.25 3 4.5 52 – 30 30 10 M3x8
12 22.5 18.5
3
47 26
3 5
64
3
45 15
3
18 29 23 M5 62.7 35.8 5 79.6 60 60 20 M5x12
25 39 29.5
5
76.1 43.5
5
105 50 50 M5x10
32 43.5 34 87 49 4 6 131 100 30 100 30 M5x12
40 50.5 40 M6 104 58 8.1 167 130 40 130 40 M6x14
50 67 55 M8 138.5 75 5 10.5 202 150 50 150 50 M8x16
63 77 65 156.5 84 6 11.5 230 190 70 190 70 M8x18
Shock absorber retainer KYP
(Code C)
for DGPL-8 ... 80
B8 D1 D5 H2 H4
DGPL-8 8 M8x1 M3 31.5 3
DGPL-12 11 M4 37
3
DGPL-18 14 M12x1 50.5 4.5
DGPL-25 19 M16x1 M5 69.5 6
DGPL-32 25
5
80 8
DGPL-40 32 M22x1.5 102
DGPL-50 35
5
M8 124 10
DGPL-63 44 M26x1.5 M10 152.5 11.5
DGPL-80 44
5
179.5
5
1.3
1 Shock absorber retainer KYP
(if the retainer is in contact with
the front cap – i.e. cap serves to
secure position – the entire
stroke length can be utilised)
2 Shock absorber YSR-...-C
(included in scope of delivery)
3 Position retainer
(included in scope of delivery)
either behind or underneath the
shock absorber retainer KYP
Dimensions
01/04 – Subject to change – Products 2001 1.3-39Festo AG & Co.
Pneumatic linear drive units DGP/DGPLRodless drive units
Slot nut NST
(Code U/Y)
Slot nut NSTL/NSTH
(Code U/X)
D1 L1
±0.5
L2 L3 D1 L1
±0.5
L2 L3
NSTL-25 M5 104 15 15 NST-5-M5 M5 12 4 –
NSTL-32
5
130
5 5
NST-8-M6 M6 22.5 6.25 –
NSTL-40 166 25 20
NSTL-50 M8 201
5
NSTH-18 M5 159 25 20
NSTL-63 229 30 35 NSTH-25 M8 209
5
NSTL-80 319
3 35
NSTH-40 259 30 35
Central mounting SLZZ
(Code Q)
B1
–0.2
D1
�
h8
SLZZ-16/10 5 14
SLZZ-25/16 5.5 25
SLZZ-50/40
5 5 5
Centring pin ZBS-5 Centring sleeve ZBH-9 Centring pin ZBS-5g p
Centring sleeve ZBH-9
(Code Z)
B1
–0.2
D1
�
D2
�
ZBS-5 5 5 h8 –
ZBH-9 4 9 h7 6.4
1.3
Technical data
Products 2001 – Subject to change – 01/081.3-40 Festo AG & Co.
Pneumatic linear drive units DGP/DGPLRodless drive units
Foot mounting HP
and central support MUP
for DG...-8 ... 80
The number of central supports MUP
required is dependent on the applied
load F and support span l.
DG...-8 ... 40
Applied
load
F[N]
Permissible, unsupported span l [mm]
DG...-50 ... 80
Applied
load
F[N]
Permissible, unsupported span l [mm]
1.3
Dimensions
01/04 – Subject to change – Products 2001 1.3-41Festo AG & Co.
Pneumatic linear drive units DGP/DGPLRodless drive units
Foot mounting HP
(Code F)
for DG...-8 ... 18
for DG...-25 ... 80
Scope of delivery:
2 feet and 4 mounting screws
+ = plus stroke length
DG...-8 ... 25 DG...-32 ... 80 Central support MUP
(Code M)
-H- Note
When mounting the central supports,
the diagram “Applied load dependent
on support span” must be complied
with.
When using the clamping unit
DG...-...-K... (� 18 ... 25 mm), the
central support can only be mounted
at one side.
1 Position of the central support
along the profile barrel is freely
selectable.
AB
�
AH AO AT AU B1 B2 D1
�
H1 H2 L1 L2 L3 SA TR
DG...-8 3.4 13.8 3 2 9 40.5 28.5 3.5 8 4 15 – – 118 13
DG...-12
3
16.5
3 9
46 34
3 5
8 4
5
143 18.6
DG...-18 5.5 24 4.8 3 13.2 70.5 47 5.5 13 7 25 176.5 24
DG...-25
5 5
29.5 6
3
13 81 58
5 5 3
7 25 226 32.5
DG...-32 6.6 37 7 4 17 35 22 6.6 – – – 41.5 35 284 38
DG...-40 46 8.5 5 17.5
35
47 40 335 45
DG...-50 9 61 11 6 25 50 26 11 70 58 400 65
DG...-63 11 69 13.5 28
5
77 65 456 75
DG...-80 13 85 12 8 88 76 576 72
1.3
Technical data
Products 2001 – Subject to change – 01/081.3-42 Festo AG & Co.
Pneumatic linear drive units DGP/DGPLRodless drive units
Foot mounting HP
and central support MUP
for DGPL-...-HD...
The number of central supports MUP
required is dependent on the applied
load F and support span l.
Deflection around the X axis DGPL-...-HD...
Permissible, unsupported span l [mm]
Applied
load
F[kN]
Deflection around the Y axis
Permissible, unsupported span l [mm]
Applied
load
F[kN]
1.3
Dimensions
01/04 – Subject to change – Products 2001 1.3-43Festo AG & Co.
Pneumatic linear drive units DGP/DGPLRodless drive units
Foot mounting HHP
(Code F)
Central support MUP
(Code M)
for DGPL-...-HD...
1 Foot mounting HHP
2 Central support MUP
+ = plus stroke length
B1 B4 B5 B6 C1 D1
�
D2
�
D4
�
H1
DGPL-...-HD18 80 40 22 35 34 5.5 6.6 6.6 8
DGPL-...-HD25 100 50 26 50 50 9 11 11
DGPL-...-HD40 140 70
5 5 9
10
H2 H3 L8 L9 L10 L11 L12 L13 L14
DGPL-...-HD18 14 26.8 68 75 64 92 99 9 290
DGPL-...-HD25 16 34.5 88 100 90 128 140 15 380
DGPL-...-HD40 37 108 120 110 148 160
5
424
1.3
Technical data
Products 2001 – Subject to change – 01/081.3-44 Festo AG & Co.
Pneumatic linear drive units DGP/DGPLRodless drive units
Pneumatic linear drive units with
clamping unit DG-...-...-K...
(Code KV, KH, KU)Clamping unit Type DG...-...-K...
Size 18 25 32 40
Pneumatic data Min. operating pressure [bar] 4
Max. operating pressure [bar] 8
Grade of filtration [µm] 40
Connection G�
Mechanical data Design Spring actuated clamping profile
Size Piston� [mm] 18 25 32 40
Effective stroke 10 ... 1800 mm
10 ... 3000 mm
Weights Basic weight [g] 388 649 985 1446g
Per 10 mm stroke [g] 18 26 34 41
Moving load [g] 61 120 153 213
Materials Housing Anodised aluminium
Clamping profile Anodised aluminium
Driver Anodised aluminium
Cover ABS
Seals Polyurethane
Ambient conditions Temperature range [�C] –10 ... +60
Holding force FH of the clamping unit
is dependent on the stroke length l
Environmental conditions: clamping
surfaces oil, grease and dirt-free
HoldingforceF H[N]
Stroke length [mm]
1.3
Dimensions
01/04 – Subject to change – Products 2001 1.3-45Festo AG & Co.
Pneumatic linear drive units DGP/DGPLRodless drive units
Clamping unit for pneumatic linear
drives
with driver DGP-...-KV/-KH
KV = clamping unit at front
KH = clamping unit at rear
with slide DGPL-...-KU
KU = clamping unit underneath
-H- Note
Clamping units DGP...-...-K... only have
supply ports at one end.
B1
max.
B2
max.
B3
max.
B4
max.
D1 H1 H2 H3 H4 H5
±0.1
H6 L1 L2 L3 L4 L5 L6
DGP-18-KV/-KH 56.8 31.2 17.2 – G� – 56.7 28.5 0.5 8.2 58 176 85 32 25 16.5 9.5
DGP-18-KU –
3 7
81
�
57
5 7 5 5
–
7 5 3 5 5 9 5
DGP-25-KV/-KH 72 33.3 19.3 – – 67.8 32.7 0.6 5.9 69.2 207 105 7 –
DGP-25-KU –
33 3 9 3
96.3 68.5
7 3 7 5 9
–
7 5 7
DGP-32-KV/-KH 83 32.7 17.7 – – 76.8 41 1 5.9 78.2 251 131 31 1
DGP-32-KU –
3 7 7 7
104.7 77.5
7 5 9
–
5 3 3
DGP-40-KV/-KH 96.4 37.1 23.1 – – 90 54.6 1.7 5.4 91.7 301 167
DGP-40-KU –
37 3
123.1 90.5
9 5 7 5
–
3 7
1.3
Key features at a glance
Products 2001 – Subject to change – 01/081.3-46 Festo AG & Co.
Pneumatic linear drive units DGO/DGOL-HDRodless drive units
DGO-...
DGOL-...-HD...
DGO -N- Diameters
12 ... 40 mm
-T- Stroke lengths
10 ... 4000 mm
– Double-acting
– Magnetically coupled without
mechanical connections
– Piston chamber and slide are
hermetically sealed
– Pressure tight and leak-free system
– Dirt and dust cannot enter
– Space-saving installation with long
strokes
– For contactless end-position
sensing
– With adjustable end-position
cushioning at both ends
Product range overview
� 1.3-48
Technical data
� 1.3-50
Dimensions
� 1.3-52
With heavy-duty guide
DGOL-...-HD...
-N- Diameters
12 ... 40 mm
-T- Stroke lengths
10 ... 2160 mm
– Heavy-duty guide with integrated
pneumatic linear drive unit DGO
with magnetic coupling
– High-precision guidance with high
load capacity
– Suitable for multiple axis designs
– For contactless end-position
sensing
– Devices and loads can be mounted
on slide
Product range overview
� 1.3-48
Technical data
� 1.3-56
Dimensions
� 1.3-58
1.3
Key features at a glance
01/04 – Subject to change – Products 2001 1.3-47Festo AG & Co.
Pneumatic linear drive units DGO/DGOL-HDRodless drive units
Motion is transmitted via the force
locking of the magnetic coupling on
the moveable outer slide. This means
that there is no advancing piston rod;
the installation space required is less
than for conventional pneumatic cylin-
ders. The cylinder chamber is hermeti-
cally sealed against the outer slide as
there is no mechanical connection.
This prevents any leakage loss.
Operating principle DGO/DGOL-HD
Mounting with hexagonal nuts Mounting options DGO
Installation types with mounting
attachments
Foot mounting
HBN-... � 1.3-54
Flange mounting
FBN-... (for� 12 ... 25 mm)
FV-... (for� 32 and 40 mm)
� 1.3-54
Moment compensator to compensate
misalignments and eliminate tilting
torques
FKG-... � 1.3-55
Moment compensator for DGO
Proximity sensor
SMEO-1/SMTO-1/SMPO-1
� 1.10-40
Mounting kits (freely selectable) for
proximity sensor
� 1.10-42
Proximity sensor for DGO
1.3
Overview and ordering data
Products 2001 – Subject to change – 01/081.3-48 Festo AG & Co.
Pneumatic linear drive units DGO/DGOL-HDRodless drive units
Pneumatic linear drives DGO-...
Moment compensator FKG
HBN FBN FV
Mounting attachments
Linear drives DGO-... Moment compensator Foot mounting Flange mounting
�
[mm]
Stroke length*
[mm] Part No. Type Part No. Type Part No. Type Part No. Type
12 10 ... 1200 15 221 DGO-12-...-P-A-B – 5 125 HBN-12/16x1 51 30 FBN-12/16
16 10 ... 2500 15 222 DGO-16-...-PPV-A-B 15 233 FKG-16-B 6 062 HBN-12/16x1-A
5 3 /
20 10 ... 3000 15 223 DGO-20-...-PPV-A-B 33 339 FKG-20-B 6 064 HBN-20/25x1-A 51 31 FBN-20/25
25 10 ... 3500 15 224 DGO-25-...-PPV-A-B 15 234 FKG-25-B
/ 5 5 3 / 5
32
35
15 225 DGO-32-...-PPV-A-B 33 340 FKG-32-B 3 754 FV-32 3 754 FV-32
40 10 ... 4000 15 226 DGO-40-...-PPV-A-B 15 235 FKG-40-B 3 765 FV-40 3 765 FV-40
* Longer strokes on request
Pneumatic linear drives with heavy-duty guide DGOL-...-HD-... (Accessories� 1.3-49)
Central mounting
Slot nut
Foot mounting Central support Slot nut Proximity sensor
Slot cover
Slot nut
Shock absorber kit
Linear drive DGOL-...
� [mm]
Stroke length
[mm]
with heavy-duty guide HD18
Part No. Type
with heavy-duty guide HD25
Part No. Type
with heavy-duty guide HD40
Part No. Type
12 10 ... 1810 164 168 DGOL-12-...-HD18 – –
16 10 ... 1810/2160 164 169 DGOL-16-...-HD18 164 176 DGOL-16-...-HD25
20 10 ... 2160 – 164 177 DGOL-20-...-HD25
25 10 ... 2160/2110 164 178 DGOL-25-...-HD25 164 185 DGOL-25-...-HD40
32 10 ... 2110 – 164 186 DGOL-32-...-HD40
40 164 187 DGOL-40-...-HD40
1.31.3
Overview and ordering data
01/04 – Subject to change – Products 2001 1.3-49Festo AG & Co.
Pneumatic linear drive units DGO/DGOL-HDRodless drive units
Accessories for pneumatic linear drives with heavy-duty guide DGOL-...-HD...
Accessories* Part No. Type
Designation DGOL-...-HD18 DGOL-...-HD25 DGOL-...-HD40
Slot cover to keep dirt out of the
sensor slot (2 pieces, each 500 mm
long)
151 680 ABP-5-S
Slot cover to keep dirt out of the
mounting slot at the side or under-
At side/underneath:
151 681 ABP-5
At side:
151 682 ABP-8
At side/underneath:
151 682 ABP-8g
neath (2 pieces, each 500 mm long) Underneath:
151 681 ABP-5
Slot nut for slide 161 020 NSTH-18 161 021 NSTH-25 161 022 NSTH-40
Slot nut for profile At side/underneath:
150 914 NST-5-M5
At side:
150 914 NST-5-M5
At side:
150 915 NST-8-M6
Underneath:
150 915 NST-8-M6
Central support
(2 pieces with 4 slot nuts)
150 738 MUP-40
(0.126 kg)
150 739 MUP-50
(0.347 kg)
Central mounting for slide 150 901 SLZZ-25/16
Foot mounting
(2 pieces with 4 mounting screws)
161 993 HHP-18
(0.358 kg)
161 994 HHP-25
(0.748 kg)
161 995 HHP-40
(1.318 kg)
Proximity sensor
with cable, 2.5 m long
150 855 SME-8-K-LED-24**
Proximity sensor, magnetic, with
plug, 0.3 m long
150 857 SME-8-S-LED-24**
Proximity sensor, magnetic, contact-
less, PNP, with cable, 2.5 m long
150 864 SMT-8-PS-K-LED-24**
Proximity sensor, magnetic, contact-
less, PNP, with plug, 0.3 m long
150 865 SMT-8-PS-S-LED-24**
Proximity sensor, magnetic, NC con-
tact, with cable, 7.5 m long
160 251 SME-8-O-K-LED-24**
Plug socket with cable for proximity
sensor with plug, 2.5 m long
159 420 SIM-M8-3GD-2,5-PU**
Shock absorber kit
(2 shock absorbers YSR- ... -C,
1 threaded pin, 1 hexagonal nut)
174 544 YHD-18
Technical data YSR-8-8-C
� 1.9-0
174 545 YHD-25
Technical data YSR-12-12-C
� 1.9-0
174 546 YHD-40
Technical data YSR-16-20-C
� 1.9-0
* Accessories must be ordered using the part no. The scope of delivery, unless otherwise stated, is 1 piece.
** Additional proximity sensors for 8 mm slot and plug sockets� 1.10-6.
1.3
Technical data
Products 2001 – Subject to change – 01/081.3-50 Festo AG & Co.
Pneumatic linear drive units DGO/DGOL-HDRodless drive units
DGO Max. operating pressure 7 barDGO
Medium Compressed air, filtered, lubricated or unlubricated. Other media upon request
Temperature range –20 ... +60 °C (observe operating range of proximity sensors)
Material End cap: anodised aluminium; cylinder barrel: high-alloy steel; seals: perbunan
�
[mm]
Effective force
at 6 bar
[N]
Breakaway force of
magnetic coupling
[N]
Cushioning
length
[mm]
Connection Basic weight
[kg]
Weight per 10
mm stroke
[kg]
12 58 100 – M5 0.320 0.0020
16 90 160 14
5
0.620 0.0027
20 142 270 17 G� 1.000 0.0038
25 214 400 19
�
1.340 0.0048
32 385 680 20 2.400 0.0060
40 645 1050 23 3.920 0.0080
Foot mounting HBN Mounting attachmentsFoot mounting HBN
Foot and flange mounting Material Galvanised steelFoot and flange mounting
FBN, FV �
[mm]
Foot mounting Weight
[kg]
Flange mounting Weight
[kg]
12 HBN-12/16x1 0.040 FBN-12/16 0.025
16 HBN-12/16x1-A 0.050
/ 5
20 HBN-20/25x1-A 0.100 FBN-20/25 0.045
25
32 FV-32 0.100 FV-32 0.100
40 FV-40 0.190 FV-40 0.190
Contactless sensing
Mounting the proximity sensors SMEO,
SMTO and SMPO for contactless sens-
ing of end positions and intermediate
positions: The proximity sensors are
fitted by the user, adjacent to the cyl-
inder (e.g. on a � 6 mm rod). Con-
tactless sensing is only possible in the
areas shown. Too small a distance A
can cause multiple switching.
1 Switching magnet for proximity
sensor
2 Switching range
3 Outer slide 360° rotatable
4 Proximity sensor with mounting
kit SMB-1
Proximity sensor Distance A
[mm]
Distance X
[mm]
Switching travel
[mm]
Hysteresis
[mm]
DGO-12-... DGO-16-... DGO-20-... DGO-25-... DGO-32-... DGO-40-...
SMEO, SMTO 6.0 ... 8.0 10 ... 11 13 ... 14 16 ... 17 20 ... 21 25 ... 26 32 ... 33 7.5 ... 13 1.0 ... 4.5
SMPO 5.0 ... 6.0
3 7 5 3 33
7.0 ... 15 0.4 ... 2.5
1.3
Technical data
01/04 – Subject to change – Products 2001 1.3-51Festo AG & Co.
Pneumatic linear drive units DGO/DGOL-HDRodless drive units
Permissible axial force F dependent
on lever arm A
Permissible lateral force Fqdependent
on stroke length
DGO
Lever arm A [mm]
AxialforceF[N]
Stroke length [mm]
LateralforceF q[N]
Maximum piston speed dependent
on moving mass to be cushioned.
If the operating conditions are out-
side the permissible range, the
moved mass must be externally
cushioned using suitable equipment
(shock absorbers, stops).
Mass being cushioned [kg]
Pistonspeed[m/s]
Horizontal mounting
position
Vertical mounting position Mass being cushioned [kg]
Pistonspeed[m/s]
1.3
Dimensions
Products 2001 – Subject to change – 01/081.3-52 Festo AG & Co.
Pneumatic linear drive units DGO/DGOL-HDRodless drive units
DGO-12-...-P-A-B
DGO-16-...-PPV-A-B
DGO-20-...-PPV-A-B
DGO-25-...-PPV-A-B
DGO-32-...-PPV-A-B
DGO-40-...-PPV-A-B
1.3
Dimensions
01/04 – Subject to change – Products 2001 1.3-53Festo AG & Co.
Pneumatic linear drive units DGO/DGOL-HDRodless drive units
DGO
1 Stroke lengths
2 Regulating screw for adjustable
end-position cushioning
3 Switching magnet for proximity
sensor
4 Outer slide 360° rotatable
5 End position
6 Lubrication nipple
7 Mounting kit with proximity
sensor
+ = plus stroke length
�
[mm]
B1 B2 D2
�
h9
D3 D4
�
D5 D6
�
D7
�
H8
D8
�
16 8 36 16 M16x1.5 20 M5 17.5 8 –
20 11 42 22 M22x1.5 27
5
21.3
25 50
5 7
M6 26.5 10
32 8 60 30 M30x1.5 38 33.6 42
40 10 74 38 M38x1.5 46 M8 42.6 12 50
�
[mm]
E1 J1 L1 L2 L3 L4 L5 L6 L7
16 M5 13.5 205 12 149 12 28 181 62.5
20 G� 16.5 217 16.5 169 16 24.5 185 67.5
25 G�* 20.5 238 20 190 28 206 75
32 G� 25.5 270 23.6 218 33.6 238 85
40 G� 32 327 35 271 47 295 100
* Max. screw-in depth 7 mm. Use screws supplied by Festo (� Vol.3 / 11.0-0).
�
[mm]
L8 L9 L10 L11 L12 L13 T1 T2 �1
16 26 49.5 26 16 40 125 8 4 24
20 32 51.5 32 8 40.5 135 10 3 32
25 36 57 36 44 150 4
3
32 48 61 48 10 49.6 170 12.5 –
40 56 75 50 12 63 200 16 4.5
1.3
Dimensions
Products 2001 – Subject to change – 01/081.3-54 Festo AG & Co.
Pneumatic linear drive units DGO/DGOL-HDRodless drive units
Mounting attachments for DGO
Foot mounting
HBN
(1 foot)
Flange mounting
FBN
(1 flange)
Foot and flange mounting
FV
(1 foot or flange)
+ = plus stroke length
�
[mm]
AB
�
AH AO AT AU H1 L10
12 5.5 20 6 4 14 – 133
16
5 5
27 189
20 6.6 30 8 5 17
9
25
3 5 7
216
32 7 28 7 4 14 14 –
40 9 33 10 19 18
�
[mm]
R1 SA SS TF TR UF UR US
12 13 153 105 40 32 53 30 42
16
3
209 161
3 53 3
20 20 219 50 40 66 40 54
25 240 182
5 5
32 – 266 218 28 52 – 66
40 335 265 30 60 80
1.3
Dimensions
01/04 – Subject to change – Products 2001 1.3-55Festo AG & Co.
Pneumatic linear drive units DGO/DGOL-HDRodless drive units
Moment compensator for DGO
Maximum permissible misalignment
of parallel guide in longitudinal axis
of cylinder = 1 mm.
Moment compensator
FKG
(1 moment compensator and
8 mounting screws)
1 Outer slide of the linear drive
unit
2 180° rotatable
Type B1 B2 B3 B4 B5 D1
�
D2
�
H1 H2
FKG-16-B 18 14 26 40 8 10 5.5 47 40
FKG-20-B 32 42
5 5
53 43
FKG-25-B 22 16 36 50 12 12 6.6 63 50
FKG-32-B 48 60 73 55
FKG-40-B 30 22 50 70 16 16 9 90 70
Type H3 H4 H5 L1 L2 L3 L4 L5
FKG-16-B 29 4 7 74 54 26 49 68
FKG-20-B 32
7
82 62 32 57 76
FKG-25-B 38 5 8 98 70 36 64 89
FKG-32-B 43
5
108 80 48 74 99
FKG-40-B 53 6 10 134 98 56 92 122
1.3
Technical data
Products 2001 – Subject to change – 01/081.3-56 Festo AG & Co.
Pneumatic linear drive units DGO/DGOL-HDRodless drive units
DGOL-...-HD... DGOL-...-HD18 DGOL-...-HD25 DGOL-...-HD40
Mounting position Any, note load capacity� 1.3-57
Stroke length 10 ... 1810 mm 10 ... 2160 mm 10 ... 2110 mm
Max. speed 3 m/s
Moving load 0.450 kg 1.780 kg 3.300 kg
Basic weight 2.950 kg 3.600 kg 11.800 kg
Weight per 10 mm stroke 0.072 kg 0.116 kg 0.176 kg
Weight of drive per 10 mm DGO-12 0.055 kg – –g p
stroke DGO-16 0.058 kg 0.207 kg
DGO-20 – 0.196 kg
DGO-25 0.201 kg 0.383 kg
DGO-32 – 0.376 kg
DGO-40 0.378 kg
Material Profile, end cap, slide: anodised aluminium;
guide: rolled steel
Temperature range –10 ... +60 °C
1.3
Technical data
01/04 – Subject to change – Products 2001 1.3-57Festo AG & Co.
Pneumatic linear drive units DGP/DGOL-HDRodless drive units
Support span l [mm]
Applied
load
F[kN]
Applied
load
F[kN]
Support span l [mm]
Deflection around the X axis
Deflection around the Y axis
Permissible load dependent on the
support span
DGOL-...HD...
Characteristic load values
The values specified refer to the centre
of the guide rail.
Maximum speed: vmax. = 3 m/s.
Combined loads
If there are two or more forces and
torques simultaneously acting upon
the heavy-duty guide, the following
equation must be satisfied:p max. /
Maximum acceleration:
amax. = 50 m/s2
q
MxMxmax.
+My
Mymax.+
MzMzmax.
+Fy
Fymax.+
FzFzmax.
≤ 1
The service life values and maximum
speeds apply to the drive guide. These
values are calculated and can be
influenced by modifications in operat-
ing conditions.
Loads
static = dynamic
Index DGOL-...-HD8 DGOL-...-HD12 DGOL-...-HD18 DGOL-...-HD25 DGOL-...-HD40
Applied load Fzmax. 518 N 1120 N 1820 N 5600 N 5600 N
Fymax. 5400 N 5400 N
Longitudinal torque Mymax. 16.8 Nm 50.4 Nm 115 Nm 415 Nm 560 Nm
Mzmax. 49 Nm 112 Nm 400 Nm 540 Nm
Lateral torque Mxmax. 12.6 Nm 33.6 Nm 70 Nm 260 Nm 375 Nm
1.3
Dimensions
Products 2001 – Subject to change – 01/081.3-58 Festo AG & Co.
Pneumatic linear drive units DGO/DGOL-HDRodless drive units
DGOL-...-HD...
1 Mounting slot for slot nut NSTH
2 Both supply ports on one
connector cap
4 Central mounting SLZZ
5 Slot nut NSTH
6 Threads for shock absorber YHD
or YSR-...-C
7 Threads for threaded pin (shock
absorber kit)
8 Rubber buffer
+ = plus stroke length
Type B1 B2
±0.2
B3 B4 B5 D1 D2 D3
�
G7
D4 D5 H1 H2
DGOL-12-HD-18 80 ±0.3 85 116 40 27.5 M5 M12x1 25 M6 M5 70 12.8
DGOL-16-HD-18
5 7 5 5 5 5 7
DGOL-16-HD-25 100 ±0.3 114 144 48 39.5 M8 M16x1 M8 G� 93.5 18.5
DGOL-20-HD-25
39 5 � 93 5 5
DGOL-25-HD-25
DGOL-25-HD-40 140 ±0.35 156 185 54 60 M22x1 124.5 21
DGOL-32-HD-40
5 5 5 5
DGOL-40-HD-40
Type H3 H4 H5 H6 H7 H8 H9 H10 L1 L2 L4 L5 L8 T1
DGOL-12-HD-18 19.5 26.7 28.2 5.9 8.7 20x45° 68 0.8 240 120 15 25 160 3.5
DGOL-16-HD-18
9 5 7 5 9 7 5 5 5 3 5
DGOL-16-HD-25 25 34.5 35 9 9.8 30x45° 90 2.0 310 155 35 210
DGOL-20-HD-25
5 3 5 35 9 9 3 5 9 3 55 35
DGOL-25-HD-25
DGOL-25-HD-40 48 51.5 70 5.5 15.5 35x45° 120 2.0 354 177 32 260 4
DGOL-32-HD-40
5 5 7 5 5 5 5 35 5 35 77 3
DGOL-40-HD-40
Profile Type B1 H4 H5
DGPL-18-HD18 80 ±0.3 14 42.3
DGPL-18-HD25 100 ±0.3 21 52.8
DGPL-25-HD25
5
DGPL-25-HD40 140 ±0.35 35 82.8
DGPL-32-HD40
35
DGPL-40-HD40
1.3
2 Mounting slot for slot nut NST
3 Sensor slot for proximity sensor
SME/SMT-8
Dimensions
01/04 – Subject to change – Products 2001 1.3-59Festo AG & Co.
Pneumatic linear drive units DGO/DGOLRodless drive units
Mounting attachments for
DGOL-...-HD...
Foot mounting HHP
for HD8 ... HD40
Central support MUP
for HD12 ... HD40
Slot nut NSTH
1 Foot mounting HHP
2 Central support MUP
5 Slot nut NSTH
+ = plus stroke length
Type B1 B4 B5 B6 C1 D1 D2 D4 D6 H1 H2 H3 L8 L9 L10 L11 L12 L13 L14 L16 L17 L18
HD-12 60 30 22 35 28 5.5 6.6 6.6 M5 6 10 21 54 60.5 52 76 82.5 8 230 119 15 15
HD-18 80 40
35
34
5 5 5
8 14 26.8 68 75 64 92 99 9 290 159 25 20
HD-25 100 50 26 50 50 9 11 11 M8 16 34.5 88 100 90 128 140 15 380 209
5
HD-40 140 70
5 5 9
10 37 108 120 110 148 160
5
424 259 30 35
1.3