20
STRONG SINCE 1970 ® AMBICA STEELS LIMITED C-54/1, Wazirpur Industrial Area, New Delhi-110052 INDIA
STRONG SINCE 1970
®
AMBICA STEELS LIMITEDC-54/1, Wazirpur Industrial Area, New Delhi-110052
INDIA
56+ countries served
80,000+ tonnes annual melting capacity
5 decades of experience
1,987+ customers served
1.031 million metric tonnes produced
151 number of grades produced
AT A GLANCE
Ambica’s presence around the world
Australia
South and Latin America
Tonnage Sold
2425Customers Served
137Countries Served
7
North AmericaTonnage Sold
3124Customers Served
43Countries Served
2
EuropeTonnage Sold
49000Customers Served
589Countries Served
27
AfricaTonnage Sold
45Customers Served
5Countries Served
2Oceania Tonnage Sold
2136Customers Served
55Countries Served
2
ASIATonnage Sold
345000Customers Served
610Countries Served
16
Sydney
IndiaNew Delhi
GermanyDusseldorf
ItalyMilan
UkraineKiev
TurkeyIzmir
Mumbai
PeruLima
ColombiaCali
USAHouston
OUR WORLDWIDE PRESENCE
1
• Ambica Steels was founded
• Commenced operations with a 5 MT EAF & Ingot Casting Pit
• Annual capacity of 10,000 MT alloy steel only.
• Installation of an 10 MT A.O.D.
• Introduced 200 series stainless steel
• Annual production 18000 MT.
• 2 Hot Rolling Mills installed in a second production unit
• Round Bars, Hexagon & Squares, Flat Bars, and RCS Bars now produced
• 5 Heat treatment furnaces and Bright Bar facility installed
• Certified OHSAS 18001:2004.
• Duplex Grades F-51, F-60 & PH grade 17-4 PH developed
• In March 2010, Ambica steels AS 9100 certified
• Annual capacity now 60000 MT with better furnaces.
• Investment in cutting edge electric furnaces to increase melting capacity by 35% to go live in may 2018
• Third production unit under construction
• 2nd automated peeling line planned.
• Installation of 1st automated peeling line from Taiwan.
• Annual capacity now 40000 MT with better furnaces
• Installation of 9/16 Continuous Billet Caster with EMS stirring from concast India
• Austenitics grades 304, 316, 316 Ti, 321 now manufactured.
• Certified ISO 9001:2000 & 14001:2001 • A.D. Merkblatt W2, Wo & P.E.D. certified.
1970-1985
1985-2001
2002-2005
2005-2007
2008-2015 2018
2015-2017
TIMELINE
PRODUCT CATEGORIES
Cold Finished Products
Bright Round Bars Flat BarsSquare BarsPrecision Round Bars
Hexagon Bars
PRODUCTION CATEGORIES
Hot Rolled Bars Forging Ingots Continuous Cast Billets
Hot Finished Products
Cold Finishing
FROM SCRAP TO STAINLESS STEELOur Operations are fully integrated from scrap to semi-finished bars
Stainless steel scrap Refining - AODMelting Billet Casting
Heat TreatmentHot Rolling
# EQUIPMENT ANNUAL CAPACITY
1 Electric Melting 90,000 MT
2 AOD 90,000 Tons
3 Continous Billet Caster 90,000 Tons
4 Ingot Casting Pit 40,000 Tons
5 Hot Rolling Mill 13” size 45,000 Tons
6 Hot Rolling Mill 18” size 55,000 Tons
8 Heat Treatment 15,000 Tons
9 Bright Round Bars 36,000 Tons
11 CD Squares & Hexagons 2,400 Tons
12 HRAP Flat Bars 12,000 Tons
ANNUAL PRODUCTION CAPACITY
MORE THAN 150 GRADES IN STAINLESS STEEL
301 321303 347 317 309 310304L 316L 316Ti 316LN
Austenitic Grades
F-51 - 1.4462 1.4821 F-53 F-60
Duplex Grades
1.4122XM19 (Ann)420C
Special Grades
Precipitation Hardening
17/4 PH 15/5 PH
420 430 430F 431
Martensitic & Ferritic Grades
CERTIFICATIONS
ORGANIZATIONAL CERTIFICATION
PRODUCT CERTIFICATION
ISO 9001:2015
ISO 14001: 2015
OHSAS 18001:2007
RoHS Directive
2011/65/EC
AS 9100 C(EN 9100:2009)and JISQ 9100
APPROVEDMANUFACTURER
FOR STEEL MAKING
CE/CPR (305/2011)
PED 2014/68/EU
Year 2002RW TÜV Systems Gmbh, Germany
Year 2003TÜV NORD CERT Gmbh, Germany
Year 2006TÜV NORD CERT Gmbh, Germany
Year 2010RW TÜV Systems Gmbh, Germany
Year 2015Loyd’s Register, London, U.K.
Year 2016TÜV NORD CERT Gmbh, Germany
Year 2003RW TÜV Systems Gmbh, Germany
Year 2018TÜV NORD GROUP, India
https://www.youtube.com/watch?v=lwTCyRYE7i4&t=134s
CORPORATE VIDEO
VIRTUAL TOUR OF OUR FACILITIES
https://ambicasteels.com/virtual-tour/unit-1/
https://ambicasteels.com/virtual-tour/unit-2/
OUR PROMINENT CUSTOMERS
VICTORA AUTO PVT LTD.
OUR PROMINENT DISTRIBUTORS
PRODUCT SPECIFICATIONS
BRIGHT ROUND BARS
Size range5mm - 100mm 3/16 inch - 4 inchSize Toleranceh9, h10, h11, K12, K13, A-484, EN 10060, DIN 1013Heat Treatment
Annealed, Solution Annealed, Quenched & Tempered (QT), Double Ageing/ Double Tempering.
PRECISION ROUND BARS
Size range
8mm to 75mm
Size Tolerance
f7, f8, h7 & h8
Heat Treatment
Annealed, Solution Annealed, Quenched & Tempered (QT), Double Ageing/ Double Tempering.
COLD DRAWN SQUARE BARS
Size range
12mm - 42mm 1/2 inch - 1 ¾ inch
Size Tolerance
h10 and h11
Heat Treatment
Solution Annealed, Annealed
HRAP SQUARE BARS
Size range14, 15, 16, 17, 18, 20, 21, 22, 23.5, 25, 26.5, 28, 30, 32, 34, 36, 38, 40, 42mmSize ToleranceASTM A 484 and EN 10059Heat TreatmentSolution Annealed, Annealed
PRODUCT SPECIFICATIONS
HEXAGON BARS
Size range12mm - 46mm 1/2 inch - 1 ¾ inchSize Tolerancesh10 and h11Heat TreatmentSolution Annealed, Annealed
HRAP FLAT BARS
Size range
Width - 38 to 100mm Thickness: 4, 5, 6, 8, 10, 12, 15,16, 20, 25 & 30mm
Size Tolerances
ASTM A 484 and EN 10058
Heat Treatment
Solution Annealed
COLD DRAWN FLAT BARS
Size range
40 to 100mm Thickness: 4, 5, 6, 8, 10, 12, 15, 16, 20, 25mm
Size Tolerances
h11 and ASTM A 484
Heat Treatment
Solution Annealed
HOT ROLLED ROUND STEEL BARS
Size range16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 42, 45, 47, 50, 53, 56, 58, 60, 63, 65, 68, 70, 73, 75, 80, 83, 85, 90, 95, 100, 105, 110, 120, 125.
Size TolerancesEN 10060 and ASTM A 484
Heat Treatment
Annealed, Solution Annealed, Quenched & Tempered (QT), Double Ageing/ Double Tempering
PRODUCT SPECIFICATIONS
CONTINUOUS CAST BILLETS
Billet Size
100x100, 120x120, 140x140, 160x160, 200x200, 220x250mm
Billet Length
2 metres - 8 metres (8 to 26 feet)
Billet Straightness
8 mm/meter max
FORGING QUALITY INGOTS
Ingot Shape Ingot Size (in mm) Ingot Weight (in MT)
Square 254x305x1524 0.9Square 356x406x1854 1.95Square 406x508x1854 2.95Square 508x610x1854 4Square 533x711x1854 5Fluted 686x762x1575 6Fluted 813x965x1854 10Fluted 965x1219x1753 14Fluted 1067x1321x2058 18Fluted 1067x1321x2490 22Fluted 1067x1321x2210 21Round 400 Ø x 2300 2.2Round 500 Ø x 2300 3.4
Square RoundFluted
OUR TESTING FACILITY
METALLURGICAL TESTING
NON-DESTRUCTIVE TESTING
MECHANICAL PROPERTY TESTING
Quality Inspections and Testing Facilities Available at Ambica
• Tensile Tests• Impact tests-Charpy• Hardness tests – Rockwell & Brinell• Surface Roughness
• Ultrasonic testing• MPI
• Hand Held Niton Guns for Sorting• Spectro for Testing Chemical Composition• Radioactivity• LECO Gas Analyzer• Microscope of Granular Structure
INDIA OFFICE
OUR LOCATIONS
Head OfficeAmbica Steels Limited C-54/1, Wazirpur Industrial Area New Delhi, [email protected]
Hot Rolling & Heat Treatment and Cold Finishing Division Ambica Steels LimitedPlot No. 32, Site-2, Loni Road Industrial Area, Mohan Nagar, Ghaziabad 201 007, Uttar Pradesh, INDIA, T: +91(120) 4189200
GERMANY OFFICEAmbica Edelstahl GmbH
Bright Bar DivisionAmbica Steels Limited B - 11,UPSIDC Industrial Area,Sahibabad 201010,District GhaziabadUttar Pradesh, INDIA
Melting, Refining and Casting DivisionAmbica Steels LimitedPlot no. 51/2, Site-4, UPSIDC Industrial Area, Sahibabad 201010,Uttar Pradesh, INDIAT: +91 (120) 4189300
Site 2
DELHI / NCR
Site 3Site 1
Head Office
AustraliaSydney
ItalyMilan
UkraineKiev
TurkeyIzmir
PeruLima
ColombiaCali
USAHouston
Ambica’s sales offices
STRONG SINCE 1970
®
