www.mitas-tyres.com
Industrial and Construction TiresTechnical Databook
3
WWW.MITAS-TYRES.COM
INDEXCONSTRUCTION AND INDUSTRIAL PNEUMATIC TIRE RANGE
www.mitas-tyres.com
Industrial and Construction Technical Databook The extensive technical data and other information relating to tires and accessories on thefollowing pages has been compiled to reflect as accurately and completely as possible the currentstate of development. Due to ongoing development the contents of this catalogue may not reflect current available range.
For further information please contact your sales / customer service representative.
EARTHMOVER TIRES USE AND MAINTENANCE
MITAS ERL, EMR SERIES LOADER SERVICE 16
MITAS ERL SERIES GRADER SERVICE 18
MITAS ERD, ERL SERIES TRANSPORT SERVICE 22
MITAS EM RADIAL SERIES 26
MITAS EM DIAGONAL SERIES 30
MITAS EXCAVATOR 38
MITAS ROLLER & TRACTOR GRADER 42
PRODUCT RANGE OVERVIEW 06
CRANE TIRES
MITAS CR SERIES 50
INDUSTRIAL TIRES
TRACTOR INDUSTRIAL TIRES
SKID STEER TIRES
MITAS FLR 74
MITAS FL SERIES 78
MITAS TI DIAGONAL SERIES 84
MITAS SK SERIES 94
MULTIPURPOSE TIRES
MITAS MPT RADIAL SERIES 56
MITAS MPT DIAGONAL SERIES 62
STORAGE, TIRE REPAIRS, PROPER USE OF TIRES 102
FITTING AND REMOVAL INSTRUCTIONS 103
EARTHMOVER TYRES GENERAL INFORMATION 104
TON – KILOMETER – PER HOUR (TKPH) VALUES 108
TERMS AND SHORTCUTS USED IN THIS CATALOGUE 110
PAGE NUMBERS TO BE AMENDED ONCEPAGINATION IS FINALISED
5
WWW.MITAS-TYRES.COM
4
WWW.MITAS-TYRES.COM
4 5
PNEUMATIC TIRES EARTHMOVER TIRESCRANE TIRES MULTIPURPOSE TIRESINDUSTRIAL TIRESTRACTOR INDUSTRIAL TIRESSKID STEER TIRES
WWW.MITAS-TYRES.COM WWW.MITAS-TYRES.COM
7
WWW.MITAS-TYRES.COM
6
WWW.MITAS-TYRES.COM
Size (inch) Tire size (Alternative tire size) Tread pattern Page
18“ 12.5 - 18 MPT-03 62
12.5 - 18 MPT-04 64
19.5“ 18 - 19.5 MPT-02 64
18 - 19.5 MPT-03 64
18 - 19.5 MPT-06 64
18 - 19.5 MPT-08 64
20“ 10.5 - 20 MPT-04 66
10.5 - 20 MPT-05 66
10.5 - 20 MPT-07 66
12.5 - 20 MPT-03 66
12.5 - 20 MPT-04 66
12.5 - 20 MPT-05 66
14.5 - 20 MPT-03 66
14.5 - 20 MPT-04 66
14.5 - 20 MPT-05 66
16/70 - 20 (405/70 - 20) MPT-02 66
16/70 - 20 (405/70 - 20) MPT-04 66
16/70 - 20 (405/70 - 20) MPT-05 68
405/70 - 20 (16/70 - 20) MPT-03 68
22.5“ 18 - 22.5 MPT-06 68
24‘ 405/70 - 24 (16/70 - 24) MPT-04 68
Industrial Radial
20“ 12.00 R 20 FLR-01 74
Industrial Diagonal
8“ 4.00 - 8 FL-03 78
4.00 - 8 FL-08 78
5.00 - 8 FL-01 78
5.00 - 8 FL-03 78
5.00 - 8 FL-03 78
5.00 - 8 FL-08 78
16x6 - 8 FL-08 78
18x7 - 8 FL-08 78
9“ 6.00 - 9 FL-01 78
6.00 - 9 FL-02 78
6.00 - 9 FL-08 78
21x8 - 9 FL-08 78
10“ 6.50 - 10 FL-01 78
6.50 - 10 FL-02 78
6.50 - 10 FL-08 78
23x9 - 10 FL-08 78
12“ 7.00 - 12 FL-01 78
7.00 - 12 FL-02 78
7.00 - 12 FL-08 78
12“ 250/75 - 12 (27x10-12) FL-08 78
13“ 23 x 5 FL-05 78
23 x 5 FL-07 78
15“ 7.50 - 15 FL-08 78
8.15 - 15 FL-04 78
Size (inch) Tire size (Alternative tire size) Tread pattern Page
8.15 - 15 FL-08 78
8.25 - 15 FL-06 78
8.25 - 15 FL-08 78
250 - 15 FL-08 78
300 - 15 FL-08 78
Tractor Industrial Diagonal
17.5“ 14 - 17.5 TR-10 84
18“ 12.5/80 - 18 TR-09 84
20“ 16.0/70 - 20 TR-09 84
24“ 16.9 - 24 IND TI-04 86
16.9 - 24 TG-01 86
17.5L - 24 TI-02 86
19.5L - 24 IND GRIP-n-RIDE 86
26“ 18.4 - 26 IND TI-06 86
28“ 16.9 - 28 IND TI-06 86
16.9 - 28 TG-01 88
30“ 16.9 - 30 IND TI-09 88
Skid Steer
12“ 23x8.50 - 12 SK-02 94
15“ 27x8.50 - 15 SK-02 94
27x10.50 - 15 SK-02 94
31x15.50 - 15 SK-02 94
15.3“ 10.0/75 - 15.3 IND SK-01 94
16.5“ 10 - 16.5 SK-02 96
10 - 16.5 SK-05 96
10 - 16.5 BIG BOY 96
12 - 16.5 SK-02 96
12 - 16.5 SK-05 96
12 - 16.5 BIG BOY 96
17.5“ 14 - 17.5 TR-10 96
18“ 10.5/80 - 18 BIG BOY 96
12.5/80 - 18 BIG BOY 96
Size (inch) Tire size (Alternative tire size) Tread pattern Page
Earthmover Radial
18" 335/80 R 18 (12.5 R 18) EM-02 26
365/70 R 18 EM-01 26
405/70 R 18 (16/70 R 18) EM-01 26
20“ 335/80 R 20 (12.5 R 20) EM-01 26
365/80 R 20 (14.5 R 20) EM-01 26
405/70 R 20 (16/70 R 20) EM-01 26
24“ 405/70 R 24 (16/70 R 24) EM-01 26
440/70 R 24 (17.5L R 24) EM-02 26
25" 17.5 R 25 ERL-20 16 / 22
17.5 R 25 ERL-30 16 / 22
20.5 R 25 ERL-20 16
20.5 R 25 ERL-30 16
20.5 R 25 EMR-01 16
20.5 R 25 ERL-50 16
20.5 R 25 ERD-20 22
20.5 R 25 ERD-30 22
23.5 R 25 ERL-20 16
23.5 R 25 ERL-30 16
23.5 R 25 ERL-40 16
23.5 R 25 ERL-50 16
23.5 R 25 ERD-20 22
23.5 R 25 ERD-30 22
23.5 R 25 ERD-40 22
26.5 R 25 ERL-30 16
26.5 R 25 ERL-40 16
26.5 R 25 ERL-50 16
26.5 R 25 ERD-30 22
26.5 R 25 ERD-40 22
750/65 R 25 ERL-30 16
750/65 R 25 ERD-30 22
33“ 18.00 R 33 ERD-45 22
Earthmover Diagonal
15“ 9.5/65 - 15 COMPACTOR 42
16“ 10.5/80 - 16 COMPACTOR 42
20“ 8.25 - 20 NB 38 38
8.25 - 20 NB-38 Extra ML 38
9.00 - 20 NB 38 38
9.00 - 20 NB-38 Extra ML 38
9.00 - 20 EM-22 38
10.00 - 20 NB 38 38
10.00 - 20 NB 38 Extra ML 38
10.00 - 20 EM-22 38
10.00 - 20 EM-23 38
11.00 - 20 NB 38 38
11.00 - 20 EM-22 38
11.00 - 20 NB 57 38
11.00 - 20 COMPACTOR 42
11.00 - 20 COMP. EXTRA 42
Size (inch) Tire size (Alternative tire size) Tread pattern Page
20“ 11.00 - 20 COMP. SMOOTH 42
11.00 R 20 COMPACTOR 42
13/80 R 20 COMPACTOR 42
500/45 - 20 TR-12 38
22.5“ 500/60 - 22.5 TI-12 38
600/40 - 22.5 TR-12 38
24“ 13.00 - 24 TG-02 44
14.00 - 24 TG-02 44
14.9 - 24 IND UK 5 44
16.9 - 24 IND UK 10 44
20 - 24 (22/70 - 24) EM-70 30
25“ 15.5 - 25 EM-20 30
15.5 - 25 EM-30 30
15.5 - 25 EM-60 30
15.5 - 25 EM-80 30
17.5 - 25 EM-20 30
17.5 - 25 EM-30 30
17.5 - 25 EM-60 30
17.5 - 25 EM-80 32
18.00 - 25 EM-20 32
18.00 - 25 EM-30 32
20.5 - 25 EM-20 32
20.5 - 25 EM-30 32
20.5 - 25 EM-60 32
23.5 - 25 EM-30 34
23.5 - 25 EM-60 34
26.5 - 25 EM-30 34
26.5 - 25 EM-60 34
26“ 23.1 - 26 IND UK 5 44
23.1 - 26 IND UK 10 44
29“ 26.5 - 29 EM-30 34
Crane Radial
25“ 335/95 R 25 CR-01 50
445/95 R 25 CR-01 50
445/95 R 25 CR-02 50
525/80 R 25 CR-01 50
Multipurpose Radial
18“ 335/80 R 18 (12.5 R 18) EM-02 56
20“ 335/80 R 20 (12.5 R 20) MPT-20 56
335/80 R 20 (12.5 R 20) MPT-21 56
365/80 R 20 (14.5 R 20) MPT-20 56
20“ 365/80 R 20 (14.5 R 20) MPT-21 56
405/70 R 20 (16/70 R 20) MPT-21 56
22.5“ 275/90 R 22.5 SRT2 58
24“ 405/70 R 24 (16/70 R 24) MPT-21 58
Multipurpose Diagonal
18‘ 10.5 - 18 MPT-02 62
PRODUCT RANGE OVERVIEW
9
WWW.MITAS-TYRES.COM
8
WWW.MITAS-TYRES.COM
750/65 R 25
750 Nominal section sidth (in mm)
65 Aspect ratio H/SW (in %)
R Radial construction
25 Nominal rim diameter (in inches)
Speed symbol A1 A2 A3 A4 A5 A6 A7 A8 B D F G J K
Speed (km/h) 5 10 15 20 25 30 35 40 50 65 80 90 100 110
bar 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5
kPa 100 150 200 250 300 350 400 450 500 550
p. s. i. 15 22 29 36 44 51 58 65 73 80
Length
1 milimeter (mm) = 0.03937"
1 inch (") = 25.4 mm = 0.0254 m
1 meter (m) = 3.281 ft
1 foot (ft) = 0.3048 m
1 kilometer (km) = 0.6214 mile
1 mile = 1609 m = 1.609 km
Pressure
1 p.s.i. (lb/in2) = 6.895 kPa
1 kg/cm2 = 98.066 kPa
1 bar = 100 kPa
Mass
1 pound (lb) = 0.4536 kg
1 kilogram (kg) = 2.205 lb
Volume
1 litre (l) = 0.21 gall
1 imperial gallon (imp.gal) = 4.55 l
bar 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5 10.0 10.5
kPa 600 650 700 750 800 850 900 950 1 000 1 050
p. s. i. 87 94 102 109 116 123 131 138 145 152
16/70 - 20
16 Nominal section width (in inches)
70 Aspect ratio H/SW (in %)
- Cross-ply construction
20 Nominal rim diameter (in inches)
27x8.50 - 12
27 Overall diameter (in inches)
8.5 Nominal section width (in inches)
- Cross-ply construction
12 Nominal rim diameter (in inches)
17.5 L – 24
17.5 Nominal section width (in inches)
L Reduced aspect ratio
- Cross-ply construction
24 Nominal rim diameter (in inches)
12.5 - 18
12.5 Nominal section width (in inches)
- Cross-ply construction
18 Nominal rim diameter (in inches)
23 x 5
23 Overall diameter (in inches)
5 Nominal section width (in inches)
SW
OD D
H
SW Section width OD Overall diameter H Section height D Rim diameter
TIRE SIZE MARKING SPEED SYMBOLS AND CONVERSION TABLES
SPEED CATEGORY
PRESSURE UNITS CONVERSION TABLE
UNITS CONVERSION TABLE
TREAD DEPTH GUIDETread depth is measured as the wearable depth according to the tread pattern design between the center line and a third of the width from the tire shoulder.
Tire Shoulder
1/3Centre Line
TREAD DEPTH MEASUREMENT AREA
11
WWW.MITAS-TYRES.COM
10
WWW.MITAS-TYRES.COM
TIRE SIDEWALL MARKING
TIRE STRUCTURE
LOAD INDEX
Sign Meaning
MITAS Trademark of Producer
23.5 R25 Tire Size Marking
ERL-30 Tread Pattern Code
195 Load Index (LI 195 = 12 150 kg)
A2 Speed Symbol (A2 = 10 km/h)
176 Load Index (LI 176 = 7 100 kg)
B Speed Symbol (B = 50 km/h)
TUBELESS Tubeless Tire
L-3 Identification Code
Index of Tire Strength
RADIAL Radial Tire
Tread patternBreaker CordInner LinerCarcass Cord
SidewallApexBead Wire
BIAS (DIAGONAL, CROSS-PLY) TIREA pneumatic tire in which the ply cords extend to the beads and are laid substantially at alternate angles less than 90° to the centre-line of the tread.
RADIAL PLY TIREA pneumatic tire in which the ply cords extend to the beads and are laid substantially at 90° to the centre-line of the tread, the carcass being stabilised by an essentially inextensible circumferential belt.
LI kg
80 450
81 462
82 475
83 487
84 500
85 515
86 530
87 545
88 560
89 580
90 600
91 615
92 630
93 650
94 670
95 690
96 710
97 730
98 750
99 775
100 800
101 825
102 850
103 875
104 900
105 925
106 950
107 975
108 1 000
109 1 030
110 1 060
111 1 090
112 1 120
113 1 150
114 1 180
115 1 215
116 1 250
LI kg
117 1 285
118 1 320
119 1 360
120 1 400
121 1 450
122 1 500
123 1 550
124 1 600
125 1 650
126 1 700
127 1 750
128 1 800
129 1 850
130 1 900
131 1 950
132 2 000
133 2 060
134 2 120
135 2 180
136 2 240
137 2 300
138 2 360
139 2 430
140 2 500
141 2 575
142 2 650
143 2 725
144 2 800
145 2 900
146 3 000
147 3 075
148 3 150
149 3 250
150 3 350
151 3 450
152 3 550
153 3 650
LI kg
154 3 750
155 3 875
156 4 000
157 4 125
158 4 250
159 4 375
160 4 500
161 4 625
162 4 750
163 4 875
164 5 000
165 5 150
166 5 300
167 5 450
168 5 600
169 5 800
170 6 000
171 6 150
172 6 300
173 6 500
174 6 700
175 6 900
176 7 100
177 7 300
178 7 500
179 7 750
180 8 000
181 8 250
182 8 500
183 8 750
184 9 000
185 9 250
186 9 500
187 9 750
188 10 000
189 10 300
190 10 600
LI kg
191 10 900
192 11 200
193 11 500
194 11 800
195 12 150
196 12 500
197 12 850
198 13 200
199 13 600
200 14 000
201 14 500
202 15 000
203 15 500
204 16 000
205 16 500
206 17 000
207 17 500
208 18 000
209 18 500
210 19 000
211 19 500
212 20 000
213 20 600
214 21 200
215 21 800
216 22 400
217 23 000
218 23 600
219 24 300
220 25 000
221 25 750
222 26 500
223 27 250
224 28 000
225 29 000
226 30 000
227 30 750
13
WWW.MITAS-TYRES.COM
12
WWW.MITAS-TYRES.COM
12
WWW.MITAS-TYRES.COM
CONSTRUCTION EARTHMOVER TIRES
15
WWW.MITAS-TYRES.COM
14
WWW.MITAS-TYRES.COM
ERL SERIES – EARTHMOVER RADIAL TIRES Ready to move the Earth
ERL-20 (L-2/G-2)
ERL-40 (L-4/G-4)
Excellent traction
TRACTION
SERVICE LIFE
RESISTANCE
RIDING COMFORT
RETREADING
TRACTION
SERVICE LIFE
RESISTANCE
RIDING COMFORT
RETREADING
Earth Sand Gravel RockEarth Sand Gravel Rock
ERL-30 (L-3/G-3)
TRACTION
SERVICE LIFE
RESISTANCE
RIDING COMFORT
RETREADING
Universal application
Designed for rocky terrain
Designed for rocky terrain
ERL-50 (L-5/G-5)
EMR-01
TRACTION
SERVICE LIFE
RESISTANCE
RIDING COMFORT
RETREADING
TRACTION
SERVICE LIFE
RESISTANCE
RIDING COMFORT
RETREADING
Excellent traction
Earth Sand Gravel Rock
Earth Sand Gravel Rock
Earth Sand Gravel Rock
Tyre Size ERL-20 ERL-30 ERL-40 ERL-50 EMR-01
17.5 R 25 • •
20.5 R 25 • • • •
23.5 R 25 • • • •
26.5 R 25 • • •
750/65 R 25 •
17
WWW.MITAS-TYRES.COM
16
WWW.MITAS-TYRES.COM
CONSTRUCTION EARTHMOVER
MITAS ERL, EMR SERIES - LOADER SERVICE
Tire sizeTread
patternType
Rim (permitted)
New Max. in service Loaded static radius (mm)
Rollingcircumference
(mm)
Treaddepth (mm)
Overall diameter
(mm)
Section width (mm)
Overall diameter
(mm)
Overall width (mm)
17.5 R 25
ERL-20TL
14.00/1.5 – 25(14.00/1.5 × 25 DC, 14.00/1.3 × 25 DC)
1 348 445 1 405 494 588 4 231 28
ERL-30TL
14.00/1.5 – 25(14.00/1.5 × 25 DC, 14.00/1.3 × 25 DC)
1 348 445 1 405 494 588 4 226 28
20.5 R 25
ERL-20TL
17.00/2.0 – 25(17.00/1.7 – 25)
1 493 521 1 561 578 647 4 680 31
ERL-30TL
17.00/2.0 – 25(17.00/1.7 – 25)
1 493 521 1 561 578 647 4 674 36
EMR-01 TL
17.00/2.0 – 25 (17.00/1.7 – 25)
1 493 521 1 561 578 643 4 515 36
ERL-50TL
17.00/2.0 – 25(17.00/1.7 – 25) 1 548 520 1 621 577 686 4 845 85
23.5 R 25
ERL-20TL 19.50/2.5 – 25 1 617 597 1 695 663 697 5 064 34
ERL-30TL 19.50/2.5 – 25 1 617 597 1 695 663 697 5 070 38
ERL-40TL 19.50/2.5 – 25 1 673 597 1 756 663 768 5 244 60
ERL-50TL 19.50/2.5 – 25 1 673 597 1 756 663 737 5 244 90
26.5 R 25
ERL-30TL 22.00/3.0 – 25 1 747 672 1 841 746 759 5 488 41
ERL-40TL 22.00/3.0 – 25 1 798 673 1 891 747 816 5 641 60
ERL-50 TL 22.00/3.0 – 25 1 790 666 1 891 747 784 5 480 97
750/65 R 25ERL-30
TL 24.00/3.0 – 25 1 607 744 1 646 781 686 5 051 44
Tread pattern
Service description
LI / SSLoader
Loader service Tire load capacity (kg) at speed (km/h) Tire
pressure (bar)
Static 5 10 25
ERL-20ERL-30
*176 A2
6 005 4 240 3 755 3 190 2.0
7 075 4 995 4 420 3 755 2.5
8 145 5 755 5 090 4 325 3.0
9 220 6 510 5 760 4 895 3.5
10 290 7 265 6 430 5 465 4.0
11 360 8 025 7 100 6 035 4.5
ERL-20ERL-30
*186 A2
8 085 5 710 5 050 4 295 2.0
9 505 6 715 5 940 5 050 2.5
10 930 7 720 6 830 5 805 3.0
12 355 8 725 7 720 6 560 3.5
13 775 9 730 8 610 7 320 4.0
15 200 10 735 9 500 8 075 4.5
ERL-50 EMR-01
**193 A2
16 432 11 605 10 270 8 216 5.0
17 664 12 475 11 040 8 832 5.5
18 400 12 995 11 500 9 200 5.8
ERL-20ERL-30
*195 A2
10 300 7 275 6 440 5 470 2.0
12 130 8 565 7 580 6 445 2.5
13 955 9 855 8 725 7 415 3.0
15 785 11 145 9 865 8 385 3.5
17 615 12 440 11 010 9 355 4.0
19 440 13 730 12 150 10 330 4.5
ERL-40ERL-50
**201 A2
20 560 14 521 12 850 10 605 5.0
21 760 15 368 13 600 10 880 5.5
23 200 16 385 14 500 11 600 5.8
ERL-30ERL-40 ERL-50
**209 A2
14 880 10 510 9 300 7 905 2.0
16 425 11 600 10 265 8 725 2.5
19 440 13 730 12 150 10 330 3.0
21 760 15 370 13 600 11 560 3.5
24 000 16 950 15 000 12 750 4.0
25 840 18 250 16 150 13 730 4.5
27 760 19 605 17 350 14 750 5.0
29 600 20 905 18 500 15 725 5.8
ERL-30*
202 A2
12 160 8 590 7 600 6 460 2.0
14 000 9 890 8 750 7 440 2.5
18 160 12 825 11 350 9 650 3.5
20 800 14 690 13 000 11 050 4.3
22 000 15 540 13 750 11 690 4.5
24 000 16 950 15 000 12 750 4.8
ERL-20 ERL-30 ERL-40 ERL-50 EMR-01
*/** - Index of tire strength
19
WWW.MITAS-TYRES.COM
18
WWW.MITAS-TYRES.COM
Tire sizeTread
patternType
Rim (permitted)
New Max. in service Loaded static radius (mm)
Rollingcircumference
(mm)
Treaddepth (mm)
Overall diameter
(mm)
Section width (mm)
Overall diameter
(mm)
Overall width (mm)
17.5 R 25
ERL-20TL
14.00/1.5 – 25(14.00/1.5 × 25 DC, 14.00/1.3 × 25 DC)
1 348 445 1 405 494 588 4 231 28
ERL-30TL
14.00/1.5 – 25(14.00/1.5 × 25 DC, 14.00/1.3 × 25 DC)
1 348 445 1 405 494 588 4 226 28
20.5 R 25
ERL-20TL
17.00/2.0 – 25(17.00/1.7 – 25)
1 493 521 1 561 578 647 4 680 31
ERL-30TL
17.00/2.0 – 25(17.00/1.7 – 25)
1 493 521 1 561 578 647 4 674 36
ERL-50TL
17.00/2.0 – 25(17.00/1.7 – 25) 1 548 520 1 621 577 686 4 845 85
23.5 R 25
ERL-20TL 19.50/2.5 – 25 1 617 597 1 695 663 697 5 064 34
ERL-30TL 19.50/2.5 – 25 1 617 597 1 695 663 697 5 070 38
ERL-40TL 19.50/2.5 – 25 1 673 597 1 756 663 729 5 244 60
ERL-50TL 19.50/2.5 – 25 1 673 597 1 756 663 737 5 244 90
26.5 R 25
ERL-30TL 22.00/3.0 – 25 1 747 672 1 841 746 759 5 488 41
ERL-40TL 22.00/3.0 – 25 1 798 673 1 891 747 770 5 641 60
ERL-50 TL 22.00/3.0 – 25 1 790 666 1 891 747 784 5 480 97
750/65 R 25ERL-30
TL 24.00/3.0 – 25 1 607 744 1 646 781 686 5 051 44
Tread pattern
Service description
LI / SSGrader
Grader service Tire load capacity (kg) at speed (km/h) Tire
pressure (bar)
15 20 30 40 50
ERL-20ERL-30
*153 A8
2 8253 4003 970
2 7753 3403 900
2 6753 2153 755
2 6003 1253 650
2 5253 0353 545
2.002.503.00
ERL-20ERL-30ERL-50
*161 A8
3 7904 4105 030
3 7204 3304 940
3 5854 1704 760
3 4854 0554 625
3 3853 9354 490
2.002.503.00
ERL-20ERL-30ERL-40ERL-50
*170 A8
4 8605 6906 525
4 7705 5906 410
4 6005 3856 175
4 4705 2356 000
4 3405 0805 825
2.002.503.00
ERL-30ERL-40 ERL-50
*178 A8
5 8306 9108 100
5 7756 8508 025
5 5626 5907 725
5 4006 4007 500
5 2406 2107 275
2.002.503.00
ERL-30 *178 A8
4 7505 8308 100
4 7005 7758 025
4 5305 5607 725
4 4005 4007 500
4 2705 2407 275
2.002.503.25
ERL-20 ERL-30 ERL-40 ERL-50
CONSTRUCTION EARTHMOVER
MITAS ERL SERIES - GRADER SERVICE
*/** - Index of tire strength
21
WWW.MITAS-TYRES.COM
20
WWW.MITAS-TYRES.COM
ERD SERIES – INNOVATIVE AND DURABLE Radial tires for dumpers
ERD-20 (E-2)
ERD-30 (E-3)
Excellent traction
TRACTION
SERVICE LIFE
RESISTANCE
RIDING COMFORT
RETREADING
TRACTION
SERVICE LIFE
RESISTANCE
RIDING COMFORT
RETREADING
Earth Sand Gravel Rock
Universal application
Universal application
Earth Sand Gravel Rock
ERD-40 (E-4)
TRACTION
SERVICE LIFE
RESISTANCE
RIDING COMFORT
RETREADING
Designed for rocky terrain
Earth Sand Gravel Rock
ERD-45 (E-4)
TRACTION
SERVICE LIFE
RESISTANCE
RIDING COMFORT
RETREADING
Earth Sand Gravel Rock
Tyre Size ERL-20 ERL-30 ERD-20 ERD-30 ERD-40 ERD-45
17.5 R 25 • •
20.5 R 25 • •
23.5 R 25 • • •
26.5 R 25 • •
750/65 R 25 •
18.00 R33 •
23
WWW.MITAS-TYRES.COM
22
WWW.MITAS-TYRES.COM
Tire sizeTread
patternType
Rim (permitted)
New Max. in service Loaded static radius (mm)
Rollingcircumference
(mm)
Treaddepth (mm)
Overall diameter
(mm)
Section width (mm)
Overall diameter
(mm)
Overall width (mm)
17.5 R 25
ERL-20TL
14.00/1.5 – 25(14.00/1.5 × 25 DC,14.00/1.3×25 DC)
1 348 445 1 405 494 588 4 231 28
ERL-30TL
14.00/1.5 – 25(14.00/1.5 × 25 DC,14.00/1.3 × 25 DC)
1 348 445 1 405 494 588 4 226 28
20.5 R 25
ERD-20TL
17.00/2.0 – 25(17.00/1.7 – 25)
1 493 521 1 561 578 670 4 686 31
ERD-30TL
17.00/2.0 – 25(17.00/1.7 – 25)
1 493 521 1 561 578 670 4 683 36
23.5 R 25
ERD-20TL
19.50/2.5 – 25 1 617 597 1 695 663 727 5 065 34
ERD-30TL 19.50/2.5 – 25 1 617 597 1 695 663 727 5 072 38
ERD-40TL 19.50/2.5 – 25 1 673 597 1 756 663 768 5 244 60
26.5 R 25
ERD-30TL 22.00/3.0 – 25 1 747 672 1 841 746 783 5 488 41
ERD-40TL 22.00/3.0 – 25 1 798 673 1 891 747 816 5 641 60
750/65 R 25ERD-30
TL 24.00/3.0 – 25 1 607 744 1 646 781 752 5 051 44
18.00 R 33ERD-45
TL 13.00/2.5 – 33 1 870 503 1 960 553 852 5 601 54
Service description
LI / SSTransport
Transport service Tire load capacity (kg) at speed (km/h)
Tire pressure
(bar)
20 30 40 50 55
*157 B
3 4453 9954 540
3 3203 8504 375
3 2253 7404 250
3 1303 6304 125
3 0703 5504 045
2.53.03.5
**177 B
6 5457 2908 030
6 3107 0257 740
6 1306 8257 520
5 9506 6257 300
5 8306 4957 155
3.54.04.5
**185 B
8 2959 23510 175
7 9908 9009 805
7 7658 6459 530
7 5408 3959 250
7 3908 2259 065
3.54.04.5
**193 B
10 45011 55012 650
10 07011 13012 190
9 78510 81511 845
9 50010 50011 500
9 31010 29011 270
3.54.04.5
**190 B
9 90010 78011 660
9 54010 39011 235
9 27010 09510 920
9 0009 80010 600
8 8209 60010 390
3.54.04.3
**191B
9 3509 90010 72511 990
9 0109 54010 33011 550
8 7509 27010 04011 225
8 5009 0009 75010 900
8 3258 8209 55010 680
4.55.05.56.5
CONSTRUCTION EARTHMOVER
MITAS ERD, ERL SERIES - TRANSPORT SERVICE ERD-20 ERD-30 ERD-40 ERD-45
Tire size Inside diameter Section diameter Circumference
17.5 R 25 581 ± 2 6.6 ± 0.5 1 825 ± 6
20.5 R 25
568 ± 2 9.8 ± 0.5 1 784 ± 623.5 R 25
26.5 R 25
750/65 R 25
18.00 R 33 750 ± 2 9.8 ± 0.5 2 356 ± 6
DIMENSIONS OF “O” RINGS (MM)
*/** - Index of tire strength
25
WWW.MITAS-TYRES.COM
24
WWW.MITAS-TYRES.COM
EM RADIAL SERIES – TIRES For lighter earthmoving machinery
EM-01
TRACTION
SERVICE LIFE
RESISTANCE
RIDING COMFORT
RETREADING
EM-02
TRACTION
SERVICE LIFE
RESISTANCE
RIDING COMFORT
RETREADING
Universal application
Excellent traction
25
WWW.MITAS-TYRES.COM
Tyre Size EM-01 EM-02
335/80 R 18 (12.5 R 18) •
365/70 R 18 •
405/70 R 18 (16/70 R 18) •
335/80 R 20 (12.5 R 20) •
365/80 R 20 (14.5 R 20) •
405/70 R 20 (16/70 R 20) •
405/70 R 24 (16/70 R 24) •
440/70 R 24 (17.5 L R 24) •
27
WWW.MITAS-TYRES.COM
26
WWW.MITAS-TYRES.COM
CONSTRUCTION EARTHMOVER
MITAS EM RADIAL SERIES EM-02EM-01
Tire sizeTread
patternType
Rim (permitted)
New Max. in service Loaded static radius (mm)
Rollingcircumference
(mm)
Treaddepth (mm)
Overall diameter
(mm)
Section width (mm)
Overall diameter
(mm)
Overall width (mm)
335/80 R 18(12.5 R 18)
EM-02TL
11 × 18 993 339 1 025 354 448 2 990 25
365/70 R 18EM-01
TL11 × 18
(12 × 18)969 360 1 000 400 437 2 915 20
405/70 R 18(16/70 R 18)
EM-01TL 13 × 18 1 025 407 1 070 452 462 3 085 20
335/80 R 20(12.5 R 20)
EM-01TL
11 × 20(12 × 20) 1 044 339 1 076 366 470 3 140 20
365/80 R 20(14.5 R 20)
EM-01TL
11 × 20(12 × 20) 1 092 360 1 127 400 489 3 285 20
405/70 R 20(16/70 R 20)
EM-01TL
13 × 20(11; 12 × 20) 1 076 407 1 121 452 487 3 240 20
405/70 R 24(16/70 R 24)
EM-01TL 13 × 24 1 178 407 1 223 452 534 3 545 20
440/70 R 24(17.5 L R 24)
EM-02TL W 15 L × 24 1 250 465 1 299 490 563 3 750 38
Servicedescription
LI / SSTransport/Loading
Tire load capacity (kg) at speed (km/h) Tire pressure
(bar)0 10 20 30 40 50
139 B/151 A2
2 5263 3473 8884 6595 520
1 5792 0922 4302 9123 450
1 3711 8172 1022 5443 036
1 2541 6611 9262 3192 760
1 1371 5051 7442 1102 540
1 0981 4511 6842 0252 430
1.42.02.43.03.8
135 B/146 A2
2 3952 9903 4403 9704 5054 800
1 5151 8852 1352 4702 7953 000
1 2211 5181 6891 9582 2222 398
1 1771 4631 6271 8872 1412 311
1 1401 4151 5701 8202 0702 250
1 1101 3801 5351 7802 0202 180
1.52.02.53.03.53.8
141 B/153 A2
2 7453 4704 1704 8505 5205 850
1 7052 1652 5903 0153 4303 650
1 3151 6892 0192 3432 6512 833
1 2671 6271 9452 2582 5552 730
1 2401 5801 8902 1952 4902 650
1 1951 5351 8352 1302 4102 575
1.52.02.53.03.53.8
156 B/168 A2
5 9356 6307 2657 8408 3558 950
3 7104 1504 5504 9105 2255 600
2 8933 2623 5753 8614 0814 400
2 7883 1433 4453 7213 9334 240
2 7153 0553 3553 6203 8304 125
2 6302 9653 2503 5103 7104 000
4.04.55.05.56.06.5
136 B/147 A2
2 3702 9703 5404 1004 6504 925
1 4851 8152 2102 4902 8803 075
1 1881 4801 7662 0302 3212 464
1 1451 4261 7011 9562 2372 374
1 1101 3901 6501 9102 1702 300
1 0801 3451 6051 8452 1102 240
1.52.02.53.03.53.8
141 B/153 A2
2 7503 4704 1504 8405 5055 850
1 7102 1852 6103 0303 4403 650
1 3091 6832 0022 3382 6622 833
1 2611 6221 9292 2532 5652 730
1 2251 5751 8652 1952 4802 650
1 1901 5301 8202 1252 4202 575
1.52.02.53.03.53.8
143 B/155 A2
2 9053 7054 4555 1655 8806 200
1 8002 3252 7903 2303 6703 875
1 3701 7712 1292 4702 8222 998
1 3201 7072 0512 3802 7192 889
1 2801 6501 9952 2952 6352 800
1 2451 6101 9352 2452 5652 725
1.52.02.53.03.53.8
146 B/158 A2
3 1553 9854 8355 6306 4406 800
1 9452 4702 9953 5003 9854 250
1 5131 9092 3102 7173 1023 300
1 4581 8392 2262 6182 9893 180
1 4101 7902 1652 5352 9303 100
1 3751 7352 1002 4702 8203 000
1.52.02.53.03.53.8
147 B/164 A2
4 2406 4807 0727 7768 032
2 6504 0504 4204 8605 020
2 4882 7282 9813 2673 383
2 3982 6292 8733 1483 260
2 3302 7002 9503 2403 350
2 2622 4802 7102 9703 075
1.42.02.43.03.2
29
WWW.MITAS-TYRES.COM
28
WWW.MITAS-TYRES.COM
Tread pattern with excellent traction and self-cleaning properties. Tubeless tire for construction machinery.
Tread pattern with good traction and minimal wheel slip, excellent cushioning, dumping and self-cleaning properties.
Tread pattern with excellent durability and puncture resistance. Suitable for loaders in hard operating conditions.
Excellent traction and self-cleaning perfomances. Suitable for telescopic handlers, graders and loaders.
Tread pattern designed mainly for heavy construction site machines and other machinery operating in combined conditions. Very good self-cleaning properties.
EM-20 (NB 38) (L-2)
EM-30 (NB 57) (L-3)
Excellent traction
EM DIAGONAL SERIES - TIRES Reliable tires for demanding earthmoving work
Longer service life
EM-60 (L-3)
Universal application
EM-70 (E-2/L-2)
EM-80 (L-2/G-2)
Excellent traction
Excellent traction
Tyre Size EM-20 EM-30 EM-60 EM-70 EM-80
20 – 24 (22/70 – 24) •
15.5 – 25 • • • •
17.5 – 25 • • • •
20.5 – 25 • • •
23.5 – 25 • • •
26.5 – 25 • •
26.5 – 29 •
18.00 – 25 • •
31
WWW.MITAS-TYRES.COM
30
WWW.MITAS-TYRES.COM
Tire sizeTread
patternType
Rim (permitted)
New Max. in serviceLoaded static
radius (mm)
Rollingcircumference
(mm)
Treadwidth (mm)
TreadDepth (mm)
Overall diameter
(mm)
Section width (mm)
Overall diameter
(mm)
Overall width (mm)
20 – 24(22/70 – 24)
EM-70TL
16.00 T – 24 SDC
1 390 545 1 452 585 633 4 170 460 28.5
15.5 – 25
EM-20TL
12.00/1.3 – 25(13.00/1.4 – 25)
1 277 394 1 328 437 590 3 857 325 28
EM-30TL
12.00/1.3 – 25(13.00/1.4 – 25)
1 277 394 1 328 437 590 3 857 325 28
EM-60TL
12.00/1.3 – 25(13.00/1.4 – 25)
1 277 394 1 328 437 590 3 857 355 26
15.5 – 25EM-80
TL 12.00/1.3 – 25 1 277 394 1 328 437 550 3 777 352 25.4
17.5 – 25
EM-20TL 14.00/1.5 – 25 1 348 445 1 405 494 620 4 063 370 30
EM-30TL 14.00/1.5 – 25 1 348 445 1 405 494 620 4 063 370 30
EM-60TL 14.00/1.5 – 25 1 348 445 1 405 494 620 4 063 392 28
Tread pattern
Service description
LI / SSLoader
Plyrating
Loader service Tire load capacity (kg) at speed (km/h) Tire
pressure (bar)
Static 5 10
EM-70 173 A2/158 B 12 PR
6 8807 5208 1608 7209 2809 84010 400
4 8595 3115 7636 1596 5546 9507 345
4 3004 7005 1005 4505 8006 1506 500
1.501.752.002.252.502.753.00
EM-20EM-30EM-60
168 A2/149 B 12 PR
6 8007 1607 4807 8008 1608 5608 960
4 8035 0575 2835 5095 7636 0466 328
4 2504 4754 6754 8755 1005 3505 600
2.502.753.003.253.503.754.00
EM-80
168 A2/142 A8 12 PR
6 8007 1607 4807 8008 1608 5608 960
4 8035 0575 2835 5095 7636 0466 328
4 2504 4754 6754 8755 1005 3505 600
2.502.753.003.253.503.754.00
174 A2/151 A8 16 PR
9 2569 5449 84010 13610 42410 720
6 5376 7406 9507 1597 3627 571
5 7855 9656 1506 3356 5156 700
4.254.504.755.005.255.50
EM-20EM-30EM-60
177 A2/158 B 16 PR
10 24010 64011 04011 36011 680
7 2327 5157 7978 0238 249
6 4006 6506 9007 1007 300
3.754.004.254.504.75
EM-20EM-60
188 A2/171 B 22 PR14 52015 28016 000
10 25510 79211 300
9 0759 550
10 000
6.506.757.00
CONSTRUCTION EARTHMOVER
MITAS EM DIAGONAL SERIES EM-30EM-20 EM-60 EM-70 EM-80
Consult the tire manufacturer for information on other applications of L-2 and L-3 tires than on wheel loaders, grades, telescopic handlers or dozers.
33
WWW.MITAS-TYRES.COM
32
WWW.MITAS-TYRES.COM
Tire sizeTread
patternType
Rim (permitted)
New Max. in service Loaded static radius (mm)
Rollingcircumference
(mm)
Treadwidth (mm)
Treaddepth (mm)
Overall diameter
(mm)
Section width (mm)
Overall diameter
(mm)
Overall width (mm)
17.5 – 25EM-80
TL14.00/1.5 – 25 1 348 445 1 405 494 597 4 016 396 27
18.00 – 25*
EM-20TL
13.00/2.5 – 25(15.00/2.5 – 25) 1 615 498 1 693 553 734 4 840 404 38
EM-30TL
13.00/2.5 – 25(15.00/2.5 – 25) 1 615 498 1 693 553 734 4 840 404 35
20.5 – 25
EM-20TL
17.00/2.0 – 25 (17.00/1.7 – 25) 1 492 520 1 561 577 682 4 484 450 38
EM-30TL
17.00/2.0 – 25 (17.00/1.7 – 25) 1 492 520 1 561 577 682 4 484 450 38
EM-60TL
17.00/2.0 – 25(17.00/1.7 – 25) 1 492 520 1 561 577 682 4 484 470 32
Tread pattern
Service description
LI / SSLoader
Plyrating
Loader service Tire load capacity (kg) at speed (km/h) Tire
pressure (bar)
Static 5 10
EM-80171 A2/145 A8177 A2/150 A8
12 PR16 PR
7 6008 0808 5608 9609 4409 84010 24010 64011 04011 36011 680
5 3685 7076 0466 3286 6676 9507 2327 5157 7978 0238 249
4 7505 0505 3505 6005 9006 1506 4006 6506 9007 1007 300
2.252.502.753.003.253.503.754.004.254.504.75
EM-20EM-30
199 A2/180 B 28 PR
17 28018 40018 88020 00020 48020 96021 760
12 20412 99513 33414 12514 46414 80315 368
10 80011 50011 80012 50012 80013 10013 600
4.254.755.005.505.756.006.50
EM-30202 A2/183 B206A2/187B
32 PR40 PR
22 88024 00025 60026 40027 200
16 15916 95018 08018 64519 210
14 30015 00016 00016 50017 000
7.007.508.509.009.50
EM-20EM-30EM-60
181 A2/167 B 16 PR
8 7209 44010 08010 72011 36012 00012 64013 200
6 1596 6677 1197 5718 0238 4758 9279 323
5 4505 9006 3006 7007 1007 5007 9008 250
1.752.002.252.502.753.003.253.50
EM-60186 A2/170 B189 A2/174 B
20 PR24 PR
13 76014 24014 72015 20015 61616 03216 480
9 71810 05710 39610 73511 02911 32311 639
8 6008 9009 2009 5009 76010 02010 300
3.754.004.254.504.755.005.25
CONSTRUCTION EARTHMOVER
MITAS EM DIAGONAL SERIES (CONTINUED) EM-30EM-20 EM-60 EM-70 EM-80
* 18.00-25 206A2 40PR EM-30 TL - do not use for container handlers and port application Consult the tire manufacturer for information on other applications of L-2 and L-3 tires than on wheel loaders, grades, telescopic handlers or dozers.
35
WWW.MITAS-TYRES.COM
34
WWW.MITAS-TYRES.COM
Tire sizeTread
patternType
Rim (permitted)
New Max. in service Loaded static radius (mm)
Rollingcircumference
(mm)
Treadwidth (mm)
Treaddepth (mm)
Overall diameter
(mm)
Section width (mm)
Overall diameter
(mm)
Overall width (mm)
23.5 – 25
EM-20TL
19.50/2.5 – 25 1 617 597 1 696 663 734 4 843 530 45
EM-30TL
19.50/2.5 – 25 1 617 597 1 696 663 734 4 843 530 40
EM-60TL
19.50/2.5 – 25 1 617 597 1 696 663 734 4 843 540 40
26.5 – 25
EM-30TL
22.00/3.0 – 25 1 750 673 1 839 747 791 5 231 605 45
EM-60TL 22.00/3.0 – 25 1 750 673 1 839 747 791 5 231 605 45
26.5 – 29EM-30
TL22.00/3.0 – 29
(24.00/3.0 – 29) 1 851 673 1 940 747 834 5 525 600 45
Tread pattern
Service description
LI / SSLoader
Plyrating
Loader service Tire load capacity (kg) at speed (km/h) Tire
pressure (bar)
Static 5 10
EM-30EM-60
186 A2/171 B 16 PR
12 80013 60014 40015 200
9 0409 60510 17010 735
8 0008 5009 0009 500
2.252.502.753.00
191 A2/177 B 20 PR16 00016 80017 440
11 30011 86512 317
10 00010 50010 900
3.253.503.75
EM-20 EM-30EM-60
199 A2/183 B 28 PR19 60020 64021 760
13 84314 57715 368
12 25012 90013 600
5.005.255.50
EM-30EM-60
203 A2/188 B 28 PR
20 32021 12021 76022 40023 20024 00024 800
14 35114 91615 36815 82016 38516 95017 515
12 70013 20013 60014 00014 50015 00015 500
3.253.503.754.004.254.504.75
EM-30EM-60
206 A2/192 B 32 PR25 60026 40027 200
18 08018 64519 210
16 00016 50017 000
5.005.255.50
EM-30 204 A2/189 B 26 PR
23 20024 00024 80025 600
16 38516 95017 51518 080
14 50015 00015 50016 000
3.754.004.254.50
CONSTRUCTION EARTHMOVER
MITAS EM DIAGONAL SERIES (CONTINUED) EM-30EM-20 EM-60 EM-70 EM-80
Consult the tire manufacturer for information on other applications of L-2 and L-3 tires than on wheel loaders, grades, telescopic handlers or dozers.
Speed (km/h) 0 1 5 10 15 20 25
Load capacity + 60 % + 30 % + 13 % (0) − 7 % − 12 % − 15 %
Tire size Inside diameter Section diameter Circumference
15.5 – 2517.5 – 25
581 ± 2 6.6 ± 0.5 1 825 ± 6
18.0 – 25
568 ± 2 9.8 ± 0.5 1 784 ± 620.5 – 25
23.5 – 25
26.5 – 25
26.5 – 29 655 ± 2 9.8 ± 0.5 2 058 ± 6
VARIATION IN LOAD CAPACITY WITH SPEED DEPENDENCE DIMENSIONS OF “O” RINGS (MM)
37
WWW.MITAS-TYRES.COM
36
WWW.MITAS-TYRES.COM
New generation of tire for excavators. Modified tread pattern NB 38, giving excellent traction and self-cleaning properties. Wider by about 7 % in comparison with NB 38. Suitable above all for high power modern excavators.
Wider tread area in comparison with NB 38 by about 23–25 %. Better stability due to wider tread area.
Higher resistance to puncture and tread wear due to higher filling of tread area. Special tread pattern for stony and hard terrain.
Higher resistance to puncture and tread wear due to higher filling of tread area. Tread pattern for stony and hard terrain.
Classic tread pattern profile for universal application with good traction and self-cleaning properties.
Tread pattern with excellent traction for flotation tires, designed above all for powered wheels of agricultural and industrial machines. Applicable for trailed wheels as well.
EM-22
EM-23
Excellent traction
EXCAVATOR DIAGONAL – WIDE RANGE TIRESof patterns for various conditions
NB-38
TR-12/TI-12
NB-38 EXTRA ML
NB 57
Excellent traction
Longer service life
Designed for rocky terrain
Classic design
Excellent traction
Tyre Size EM-22 EM-23 NB 28 NB 38 EX NB 57 TR-12/TI-12
8.25 – 20 • •
9.00 – 20 • • •
10.00 – 20 • • • •
11.00 – 20 • • •
500/45 – 20 •
500/60 – 22.5 •
600/40 – 22.5 •
39
WWW.MITAS-TYRES.COM
38
WWW.MITAS-TYRES.COM
Tire sizeTread
patternType
Rim(permitted)
Tube Flap
New Max. in service Loaded static radius (mm)
Rollingcircumfe-
rence(mm)
Treadwidth(mm)
Treaddepth(mm)
Minimaldual
spacing(mm)
Overall diameter (mm)
Section width (mm)
Overall diameter (mm)
Overall width (mm)
8.25 – 20
NB 38TT
6.5 – 20(6.0; 7.0 – 20)
8.25 – 2020/1 eHD
970 234 993 253 462 2 940 185 18 269
NB 38 Extra ML TT
6.5 – 20(6.0; 7.0 – 20)
8.25 – 2020/1 eHD
970 234 993 253 462 2 940 220 18 269
9.00 – 20
NB 38TT
7.0 – 20(6.5; 7.5 – 20)
9.00 – 2020/1 eHD
1 012 256 1 037 276 481 3 070 190 20 297
NB 38 Extra ML TT
7.0 – 20(6.5; 7.5 – 20)
9.00 – 2020/1 eHD
1 012 256 1 037 276 481 3 070 234 20 297
EM-22TT
7.0 – 20(6.5; 7.5 – 20)
9.00 – 2020/1 eHD
1 012 256 1 037 276 481 3 070 203 20 297
10.00 – 20NB 38 Extra
ML TT7.5 – 20
(7.0; 8.0 – 20) 10.00 – 2020/2 eHD
1 050 275 1 077 297 498 3 180 264 22 316
10.00 – 20
NB 38TT
7.5 – 20(7.0; 8.0 – 20)
10.00 – 2020/2 eHD 1 050 275 1 077 297 498 3 180 215 20 316
NB 38 Extra ML TT
7.5 – 20(7.0; 8.0 – 20)
10.00 – 2020/2 eHD 1 050 275 1 077 297 498 3 180 264 22 316
EM-22 7.5 – 20(7.0; 8.0 – 20)
10.00 – 2020/2 eHD 1 050 275 1 077 297 498 3 180 230 20 316
EM-23 7.5 – 20(7.0; 8.0 – 20)
10.00 – 2020/2 eHD 1 050 275 1 077 297 498 3 180 230 18 316
11.00 – 20
NB 38TT
8.0 – 20(7.5 – 20)
11.00 – 2020/2 eHD 1 080 291 1 109 314 511 3 275 240 25 335
EM-22TT
8.0 – 20(7.5 – 20)
11.00 – 2020/2 eHD 1 080 291 1 109 314 511 3 275 254 25 335
11.00 – 20NB 57
TT8.0 – 20
(7.5 – 20)11.00 – 2020/2 eHD 1 080 291 1 109 314 511 3 275 – 25 335
500/45 – 20TR-12
TL16.00 × 20
DC – 980 490 1 030 530 445 2 910 – 32 –
500/60 – 22.5
TI-12TL
16.00 × 22.5 DC – 1 192 503 1 234 543 519 3 504 – 35 –
600/40 – 22.5
TR-12TL
20.00 × 22.5 DC – 1 050 600 1 107 642 473 3 146 – 35 –
Tread pattern
Service description
LI / SS
Plyrating
Tire load capacity (kg) at speed (km/h) Tire pressure (bar)
Static 10 20 30 40 50 70
NB-38NB-38 Extra ML 122 B 14 PR
2 8252 9103 000
2 2602 3302 400
1 8851 9402 000
1 5421 5861 635
1 4571 4991 545
1 4151 4551 500
6.006.506.75
NB-38NB-38 Extra ML
EM-22 140 B 14 PR
4 7104 8505 000
3 7703 8804 000
3 2003 3003 400
2 5722 6492 725
2 4312 5032 575
2 3602 4302 500
6.506.757.00
NB-38 Extra ML 145 B 14 PR6 3806 575
4 5954 735
3 8303 945
3 1173 210
2 9463 033
2 8602 945
6.006.50
NB-38NB-38 Extra ML
EM-22EM-23
146 B 16 PR6 7907 000
4 8505 000
3 8804 000
3 1723 270
2 9973 090
2 9103 000
7.257.50
NB-38EM-22 148 B 16 PR
6 7506 9907 200
4 9005 0505 200
4 0424 1804 300
3 2783 3903 488
3 0983 2033 296
3 0083 1103 200
6.507.007.25
NB 57140 E 16 PR
5 4505 8506 250
3 9004 2004 500
3 2703 5103 750
2 7252 9253 125
2 5002 6902 875
2 3502 5202 700
2 1802 3402 500
4.004.505.00
TR-12160 A8 –
6 8317 1287 425
5 7956 0506 300
5 2155 4405 670
4 6404 8405 040
4 1404 3204 500
3 7253 8904 050
5.205.606.00
TI-12
152 A8 –
5 2645 4785 6935 858
4 4664 6484 8304 970
4 0194 1834 3474 473
3 5733 7183 8643 976
3 1903 3203 4503 550
2 8712 9883 1053 195
2.803.003.203.60
TR-12
169 A8 –
3 2013 5973 9934 3734 4964 8685 1988 0858 3998 6968 9939 2909 570
2 7153 0503 3903 7103 8154 1304 4106 8607 1257 3807 6307 8808 120
2 4452 7453 0503 3403 4353 7153 9706 1756 4156 6406 8657 0957 310
2 1752 4402 7102 9703 0503 3053 5305 4905 7005 9006 1056 3056 495
1 9402 1802 4202 6502 7252 9503 1504 9005 0905 2705 4505 6305 800
1 7451 9602 1802 3852 4552 6552 8354 4104 5804 7454 9055 0655 220
1.201.501.802.102.202.502.804.504.805.105.405.706.00
CONSTRUCTION EARTHMOVER
MITAS EXCAVATOR NB-38EM-23EM-22 NB-38 EXTRA ML
NB-57 TR-12
41
WWW.MITAS-TYRES.COM
40
WWW.MITAS-TYRES.COM
Special tire for rollers. The same tread pattern for Compactor, Compactor Extra and Compactor Smooth.
Tread pattern suitable for industrial and road construction equipment.
Tread pattern suitable for industrial and road construction equipment.
COMPACTOR (C-1)
ROLLER & TRACTOR GRADER TIRES Road works specialists
Tread pattern with good traction and self-cleaning properties.
Effective self-cleaning
TG-02 (R-4)
UK 5 (R-3)
UK 10 (R-3)
Directional stability
Directional stability
Tyre Size COMP. TG-02 UK 5 UK 10
9.5/65 - 15 •
10.5/80 - 16 •
11.00 – 20 •
11.00 R 20 •
13/80 R 20 •
13.00 – 24 •
14.00 – 24 •
14.9 – 24 IND •
16.9 – 24 IND •
23.1 – 26 IND • •
43
WWW.MITAS-TYRES.COM
42
WWW.MITAS-TYRES.COM
CONSTRUCTION EARTHMOVER
MITAS ROLLER & TRACTOR GRADER
Tire sizeTread
patternType
Rim(permitted)
Tube Flap
New Max. in serviceLoaded static
radius (mm)
Rollingcircumference
(mm)
Minimaldual
spacing(mm)
Treaddepth(mm)
Overall diameter
(mm)
Section width (mm)
Overall diameter
(mm)
Overall width (mm)
9.5/65 - 15COMPACTOR
TL15x7 JA - 671 243 685 263 333 2 019 280 SMOOTH
10.5/80 - 16COMPACTOR
TL16X8 LB - 812 285 830 307 372 2 430 330 SMOOTH
11.00 – 20COMPACTOR
TT8.0 – 20
(7.5 – 20)11.00 – 2020/2 eHD
1 040 290 1 062 314 493 3 150 335 SMOOTH
11.00 – 20COMPACTOR
EXTRATT
8.0 – 20(8.5 – 20)
11.00 – 2020/2 eHD 1 064 294 1 086 314 504 3 225 340 SMOOTH
11.00 – 20COMPACTOR
SMOOTHTT
8.0 – 20(8.5 – 20)
11.00 – 2020/2 eHD 1 070 291 1 092 314 507 3 240 335 SMOOTH
11.00 R 20*COMPACTOR
TT 8.0 – 20 11.00 – 2020/2 eHD 1 069 293 1 097 316 – 3 210 352 SMOOTH
13/80 R 20*COMPACTOR
TT 9.0 – 20 13/80 – 20 1 050 322 1 072 348 – 3 150 387 SMOOTH
Service description
LI / SS
Plyrating
Tire load capacity (kg) at speed (km/h) Tire pressure (bar)
Static 5 8 10 15 25
6 PR1 7001 9702 100
1 2001 4001 500
1 0601 2301 315
2.503.003.25
6 PR2 1602 6003 000
1 5401 8502 140
1 3501 6201 875
2.002.503.00
164 A3 16 PR
1 4002 0202 6403 2403 8004 3504 9005 4806 000
1 3501 9002 4803 0003 5004 0004 5005 000
2.003.004.005.006.007.008.009.0010.00
170 A2 18 PR
7 9848 2728 4888 7129 0009 2169 600
4 9905 1705 3055 4455 6255 7606 000
6.256.556.907.257.608.008.30
156 A5 18 PR
6 1096 3116 4686 6247 360
3 8183 9454 0424 1404 600
3 3203 4303 5153 6004 000
7.257.608.008.3010.00
157 A3 –
1 5001 9002 2502 6252 9503 3003 9254 5505 150
1 2001 5251 8002 1002 3752 6253 1503 6504 125
1.502.002.503.003.504.005.006.007.00
164 A3 –
2 5203 1003 6604 2604 8405 4205 7106 000
2 2402 7603 2603 7904 3104 8205 000
3.004.005.006.007.008.008.509.00
COMPACTOR TG-02 UK 5 UK 10
* All steel radial construction
45
WWW.MITAS-TYRES.COM
44
WWW.MITAS-TYRES.COM
Tire sizeTread
patternType
Rim(permitted)
Tube Flap
New Max. in service Loaded static radius (mm)
Rollingcircumference
(mm)
Treaddepth(mm)
Overall diameter
(mm)
Section width (mm)
Overall diameter
(mm)
Overall width (mm)
13.00 – 24TG-02TT/TL
8.00TG SDC(9.00/1.5 (DC)) 13.00 – 24 1 278 333 1 318 360 579 3 770 25
14.00 – 24TG-02TT/TL
8.00TG SDC(10.00 VA SDC)
14.00 – 24 1 348 362 1 392 391 608 3 975 25
Service description
LI / SS
Plyrating
Tire load capacity (kg) at speed (km/h) Tire pressure (bar)
5 10 15 25 40
143 A8 12 PR3 5024 0124 633
3 0903 5404 088
2 7603 1623 652
2 2872 6203 025
2 0602 3602 725
2.002.503.00
153 A8 16 PR5 0495 6536 205
4 4554 9885 475
3 9804 4564 891
3 2973 6914 052
2 9703 3253 650
3.253.503.75
Tire sizeTread
patternType
Rim(permitted)
New Max. in service Loaded static radius (mm)
Rollingcircumference
(mm)
Treaddepth(mm)
Overall diameter
(mm)
Section width (mm)
Overall diameter
(mm)
Overall width (mm)
14.9 – 24 INDUK 5TL W 13 × 24 1 250 395 1 285 425 580 3 710 18
16.9 – 24 INDUK 10
TL W 15 L × 24 1 308 442 1 335 464 579 3 729 22.2
23.1 – 26 IND
UK 5TL DW 20 A × 26 1 580 587 1 635 634 750 4 660 20
UK 10TL DW 20 A × 26 1 580 587 1 635 634 750 4 660 30
Tread patternService
descriptionLI / SS
Plyrating
Tire load capacity (kg) at speed (km/h) Tire pressure (bar)
Static 10 10 cyclic 20 30 40 50
UK 5 128 A8 8 PR
3 2653 5653 8654 140
1 7751 9382 1002 250
2 1302 3252 5202 700
1 9352 1122 2892 453
1 4771 6121 7471 872
1 4201 5501 6801 800
1 2921 4111 5291 638
1.201.401.601.80
UK 10 129 B 8 PR4 1404 3954 635
2 2502 3902 520
2 7002 8653 024
2 1602 3502 480
1 9252 0452 155
1 8001 9102 016
1 6401 7381 850
1.301.501.70
UK 5 158 A8 10 PR
7 8658 6259 4059 775
4 2754 6905 1155 315
5 1305 6256 1356 375
3 7304 0904 4604 635
3 5553 9004 2554 420
3 4203 7504 0904 250
3 1103 4153 7203 870
1.201.401.601.70
UK 5UK 10
162 A8 12 PR 10 925 5 940 7 125 5 180 4 940 4 750 4 325 1.90
COMPACTOR TG-02 UK 5 UK 10
CONSTRUCTION EARTHMOVER
MITAS ROLLER & TRACTOR GRADER (CONTINUED)
47
WWW.MITAS-TYRES.COM
46
WWW.MITAS-TYRES.COM
CONSTRUCTION CRANE TIRES
46
WWW.MITAS-TYRES.COM
49
WWW.MITAS-TYRES.COM
48
WWW.MITAS-TYRES.COM
CR-01 & CR-02 – NEW GENERATION of crane tire for improved productivity
CR-01
TRACTION
SERVICE LIFE
RESISTANCE
SPEED
COMFORT
CR-02
TRACTION
SERVICE LIFE
RESISTANCE
SPEED
COMFORT
49
WWW.MITAS-TYRES.COM
51
WWW.MITAS-TYRES.COM
50
WWW.MITAS-TYRES.COM
Tire sizeTread
patternType
Rim(permitted)
New Max. in service Loadedstaticradius(mm)
Rollingcircumference
(mm)
Tread depth(mm)
Service description
LI / SS
Tire load capacity (kg) at speed (km/h)Tire
pressure (bar)Overall diameter
(mm)
Section width (mm)
Overall diameter
(mm)
Overall width (mm)
Static 5 10 20 30 40 50 60 70 80 85 90
385/95 R 25CR-01
TL9.50/1.7 CR-25 (10.00/1.5-25)
1 369 379 1 415 409 633 4 295 23
170 F9 75011 25012 50013 75015 000
8 1909 45010 50011 55012 600
7 1758 2809 20010 12011 040
5 8506 7507 5008 2509 000
4 8755 6256 2506 8757 500
4 4855 1755 7506 3256 900
4 3705 0405 6006 1606 720
4 2904 9505 5006 0506 600
4 0954 7255 2505 7756 300
3 9004 5005 0005 5006 000
5.06.07.08.09.0
445/95 R 25
CR-01TL
11.00/1.7CR-25(11.25/2.0-25)
(11.00/1.7CRx25)1 480 440 1 570 483 688 4 504 26
174 F
10 39512 12513 59015 16016 750
8 78010 25511 46512 79514 070
7 5758 8559 88511 03512 060
6 3607 4308 2809 25510 050
5 3206 2156 9157 7408 375
4 9005 7206 3657 1257 705
4 7755 5706 1956 9407 505
4 6855 4706 0756 8157 370
4 4755 2205 8056 5107 035
4 2604 9705 5256 1956 700
4 1354 8205 3606 0106 500
5.06.07.08.09.0CR-02
TL
11.00/1.7CR-25(11.25/2.0-25)
(11.00/1.7CRx25)1 473 440 1 549 475 686 4 506 23
525/80 R 25CR-01
TL17.00/1.7CR-25(17.00/2.0-25)
1 475 530 1 542 588 679 4 450 28 176 F
13 40011 25012 95014 950
9 10010 50012 100
8 4009 25010 650
6 7007 7008 900
6 1507 1008 200
6 0006 9008 000
5 9006 8007 850
5 6506 5007 500
5 3506 1507 100
5 0505 8006 700
5.06.07.0
15 400
17 750
Tire size Inside diameter Section diameter Circumference
385/95 R 25
568 ± 2 9.8 ± 0.5 1 784 ± 6445/95 R 25
525/80 R 25
CONSTRUCTION CRANE
MITAS CR SERIES CR-01 CR-02
DIMENSIONS OF “O” RINGS (MM)
53
WWW.MITAS-TYRES.COM
52
WWW.MITAS-TYRES.COM
CONSTRUCTION MULTIPURPOSE TIRES
52
WWW.MITAS-TYRES.COM
55
WWW.MITAS-TYRES.COM
54
WWW.MITAS-TYRES.COM
Rail & Road applicationExcellent durabilityLonger service life
TRACTION
SERVICE LIFE
RESISTANCE
Non-directional tread patternGood traction on- and off-the-roadEffective self-cleaning properties
TRACTION
SERVICE LIFE
RESISTANCE
Universal perennial tread patternOn- and off- road applicationMunicipal, military and other special vehicles
MPT-20
MPT-21
MULTIPURPOSE RADIAL TIRES Universal tires for on- and off-road use
Universal application
Longer service life
Good traction properties Excellent durability
TRACTION
SERVICE LIFE
RESISTANCE
Excellent traction
EM-02
SRT2
Rail and road application
TRACTION
SERVICE LIFE
RESISTANCE
Tyre Size MPT-20 MPT-21 EM-02 SRT2
335/80 R 18 (12.5 R 18) •
335/80 R 20 (12.5 R 20) • •
365/80 R 20 (14.5 R 20) • •
405/70 R 20 (16/70 R 20) •
275/90 R 22.5 •
405/70 R 24 (16/70 R 24) •
57
WWW.MITAS-TYRES.COM
56
WWW.MITAS-TYRES.COM
Tire sizeTread
patternType
Rim (permitted)
New Max. in service Loaded static radius (mm)
Rollingcircumference
(mm)
Treaddepth(mm)
Service description
LI / SS
Tire load capacity (kg) at speed (km/h)Tire
pressure (bar)Overall diameter
(mm)
Section width (mm)
Overall diameter
(mm)
Overall width (mm)
Static 10 40 50 70 80 90 100 110
335/80 R 18(12.5 R 18)
EM-02TL
11 × 18(12 × 18)
993 340 1 025 354 448 2 979 22 132G
1 9132 7383 2503 7634 4635 000
1 1851 6902 0452 3702 8403 190
8901 2601 4901 7152 0402 300
8501 2051 4401 6702 0002 240
8001 1401 3751 5951 9052 140
7951 1201 3401 5501 8402 080
7651 0951 3001 5051 7852 000
1.001.602.002.403.003.50
335/80 R 20(12.5 R 20)
MPT-20TL
11 × 20(12 × 20)
1 044 340 1 076 354 480 3 132 17.5 147 K
3 3004 5005 6006 5637 4387 688
2 3763 2404 0324 7255 3555 535
1 5182 0702 5763 0193 4213 536
1 4782 0162 5092 9403 3323 444
1 4121 9262 3972 8093 1833 290
1 3731 8722 3302 7303 0943 198
1 3461 8362 2852 6783 0353 137
1 3201 8002 2402 6252 9753 075
1 3201 8002 2402 6252 9753 075
2.003.004.005.006.006.50
335/80 R 20(12.5 R 20)
MPT-21TL
11 × 20(12 × 20) 1 044 340 1 076 354 474 3 132 20 139 J
2 4303 0603 6504 2154 8355 3405 850
1 5151 8452 2602 5553 0153 3303 650
1 1551 4451 7151 9852 3002 5452 790
1 1421 4171 6911 9432 2622 5032 722
1 0801 3451 6001 8452 1602 3802 600
1 0551 3131 5651 8002 1032 3252 540
1 0301 2801 5301 7552 0452 2702 480
1 0201 2651 5101 7352 0202 2352 430
1.502.002.503.003.504.004.50
365/80 R 20(14.5 R 20)
MPT-20TL
11 × 20(12 × 20) 1 092 367 1 128 374 495 3 318 19 152 K
3 6135 0006 4387 5008 6258 875
2 5103 4854 4205 3756 2406 390
1 6622 3002 9613 4503 9684 083
1 6182 2402 8843 3603 8643 976
1 5462 1402 7553 2103 6923 799
1 5032 0802 6783 1203 5883 692
1 4742 0402 6273 0603 5193 621
1 3952 0002 5752 9703 4503 550
1 3952 0002 5752 9703 4503 550
2.003.004.005.006.006.25
365/80 R 20(14.5 R 20)
MPT-21TL
11 × 20(12 × 20) 1 092 360 1 128 374 493 3 276 20 152 J
2 8003 5254 8756 1507 4508 6508 950
1 7452 2253 0903 7904 5955 4005 600
1 2601 6202 2552 7253 3253 9304 080
1 2381 6072 2232 6543 2653 8363 976
1 1851 5202 1002 5303 0953 6603 800
1 1581 4882 0582 4703 0233 5733 710
1 1301 4552 0152 4102 9503 4853 620
1 1051 4351 9852 3702 9153 4253 550
1.502.003.004.005.006.006.25
405/70 R 20(16/70 R 20)
MPT-21TL
13 × 20(12 × 20) 1 076 407 1 110 423 492 3 228 20 152J
2 7804 2705 6357 0308 2108 950
1 7652 7403 6004 5055 2405 600
1 2701 9802 6203 3053 8154 080
1 2491 9432 5593 2543 7303 976
1 1751 8302 4303 0703 5303 800
1 1531 7982 3853 0133 4653 710
1 1301 7652 3402 9553 4003 620
1 1151 7352 2852 9053 3303 550
1.502.503.504.505.506.00
CONSTRUCTION MULTIPURPOSE
MITAS MPT RADIAL SERIES MPT-20EM-02 MPT-21 SRT2
59
WWW.MITAS-TYRES.COM
58
WWW.MITAS-TYRES.COM
Tire sizeTread
patternType
Rim (permitted)
New Max. in service Loaded static radius (mm)
Rollingcircumference
(mm)
Treaddepth(mm)
Service description
LI / SS
Tire load capacity (kg) at speed (km/h)Tire
pressure (bar)Overall diameter
(mm)
Section width (mm)
Overall diameter
(mm)
Overall width (mm)
Static 10 40 50 70 80 90 100 110
275/90 R 22.5SRT2
TL8.25 × 22.5 1 076 270 1 100 286 491 3 261 17 153 G / 163 A5
6 2356 7107 1857 6258 0758 6009 125
4 5704 9055 2405 5905 9356 2506 570
2 8953 1003 3103 5353 7603 9804 195
2 8253 0403 2503 4603 6753 8804 085
2 6702 8753 0753 2653 4553 6803 905
2 5952 7902 9903 1703 3603 5803 795
2 4952 6852 8753 0503 2303 4403 650
5.506.006.507.007.508.008.50
405/70 R 24(16/70 R 24)
MPT-21TL
13.0 × 24(13 × 24)
1 178 407 1 212 423 538 3 534 20 152 J
3 2254 0854 9205 7506 5457 3908 1658 950
1 9902 5253 0353 5354 0654 5555 0555 600
1 4351 8202 2002 5752 9403 3153 6754 080
1 3781 7532 1062 4862 8453 2093 5733 976
1 2701 6702 0202 3702 7153 0553 3903 800
1 2581 6281 9672 3132 6502 9803 3103 710
1 2451 5851 9152 2552 5852 9053 2303 620
1 2301 5651 8802 2202 5402 8653 1903 550
1.502.002.503.003.504.004.505.00
CONSTRUCTION MULTIPURPOSE
MITAS MPT RADIAL SERIES (CONTINUED) MPT-20EM-02 MPT-21 SRT2
61
WWW.MITAS-TYRES.COM
60
WWW.MITAS-TYRES.COM
Tread pattern with excellent treadwear and durability. Maximum traction capabilities in soft soil.
Robust tread pattern with good traction and perfect stability. Designed especially for excavators and telescopic handlers in hard terrain.
MITAS MULTIPURPOSE DIAGONAL TIRES Proven tread patterns for wide range of application
MPT-04
MPT-08
Effective self-cleaning
Universal tread pattern for various application with good traction and self-cleaning properties.
Universal tread pattern for on- and off-road application with good traction. Suitable for municipal, on road service and other special service vehicles.
MPT-02
MPT-03
Universal application
Universal application
Universal heavy-duty tread pattern for on- and off-road application. Suitable mainly for municipal, military, on road service and other special service vehicles.
MPT-05
Road application
Tread pattern with excellent traction properties and enhanced stability. Especially suitable for telescopic handlers and excavators.
MPT-06
Enhanced lateral stability
Non-directional tread pattern, suitable for various special service vehicles.
MPT-07
Universal application
Excellent traction
Tyre Size MPT-02 MPT-03 MPT-04 MPT-05 MPT-06 MPT-07 MPT-08
10.5 – 18 •
12.5 – 18 • •
18 – 19.5 • • • •
10.5 – 20 • • •
12.5 – 20 • • •
14.5 – 20 • • •
16/70 – 20 • • •
405/70 – 20 •
18 – 22.5 •
405/70 – 24 •
63
WWW.MITAS-TYRES.COM
62
WWW.MITAS-TYRES.COM
Tire sizeTread
patternType
Rim(permitted)
Tube Flap
New Max. in service Loaded static radius (mm)
Rollingcircumference
(mm)
Treaddepth(mm)
Overall diameter
(mm)
Section width (mm)
Overall diameter
(mm)
Overall width (mm)
10.5 – 18MPT-02
TL9 × 18 10 – 18 905 270 927 292 419 2 660 20
12.5 – 18MPT-03
TL11 × 18(9 × 18)
12.5 – 1812 – 18 HS 990 325 1 017 351 455 2 910 20
Treadpattern
Service description
LI / SS
Plyrating
Tire load capacity (kg) at speed (km/h)Tire
pressure (bar)Static 10 20 30 40 50 60 65 70 80 90
MPT-02 129 D 10 PR
3 5253 7003 9004 1254 2504 4504 625
2 3272 4422 5742 7232 8052 9373 053
1 8331 9242 0282 1452 2102 3142 405
1 6221 7021 7941 8981 9552 0472 128
1 4951 5691 6541 7491 8021 8871 961
1 4661 5391 6221 7161 7681 8511 924
1 4241 4951 5761 6671 7171 7981 869
1 4101 4801 5601 6501 7001 7801 850
2.252.502.753.003.253.503.75
MPT-03128 G131 G136 G
10 PR12 PR16 PR
3 3873 6183 8714 1244 3324 5004 7004 8755 0555 2385 4205 600
2 4392 6052 7872 9703 1193 2403 3843 5103 6403 7713 9024 032
2 0322 1712 3232 4752 5992 7002 8202 9253 0333 1433 2523 360
1 6941 8091 9352 0622 1662 2502 3502 4382 5282 6192 7102 800
1 5581 6641 7811 8971 9932 0702 1622 2432 3252 4092 4932 576
1 5171 6211 7341 8481 9412 0162 1062 1842 2652 3462 4282 509
1 4901 5921 7031 8151 9061 9802 0682 1452 2242 3052 3852 464
1 4701 5701 6801 7901 8801 9502 0402 1202 1942 2732 3522 430
1 4501 5481 6571 7651 8541 9262 0122 0872 1642 2422 3202 397
1 4091 5051 6101 7161 8021 8721 9552 0282 1032 1792 2552 330
1 3551 4471 5481 6501 7331 8001 8801 9502 0222 0952 1682 240
1.752.002.252.502.753.003.253.503.754.004.254.50
CONSTRUCTION MULTIPURPOSE
MITAS MPT DIAGONAL SERIES MPT-02 MPT-05MPT-04MPT-03 MPT-06 MPT-07 MPT-08
65
WWW.MITAS-TYRES.COM
64
WWW.MITAS-TYRES.COM
CONSTRUCTION MULTIPURPOSE
MITAS MPT DIAGONAL SERIES (CONTINUED)
Tire sizeTread
patternType
Rim(permitted)
Tube Flap
New Max. in service Loaded static radius (mm)
Rollingcircumference
(mm)
TreaddepthOverall
diameter (mm)
Section width (mm)
Overall diameter
(mm)
Overall width (mm)
12.5 – 18MPT-04
TL11 × 18(9 × 18)
12.5 – 1812 – 18 HS
990 325 1 017 351 455 2 910 25
18 – 19.5MPT-02
TL14.00 × 19.5
(13.00 × 19.5) – 1 080 457 1 121 494 490 3 140 30
18 – 19.5MPT-03
TL14.00 × 19.5
(13.00 × 19.5) – 1 080 457 1 121 494 490 3 140 24
18 – 19.5
MPT-06 TL
14.00 × 19.5(13.00 × 19.5) – 1 100 470 1 129 505 508 3 280 30
MPT-08TL
14.00 × 19.5(13.00 × 19.5) – 1 100 470 1 129 505 508 3 280 33
Treadpattern
Service description
LI / SS
Plyrating
Tire load capacity (kg) at speed (km/h)Tire
pressure (bar)Static 10 20 30 40 50 60 65 70 80 90
MPT-04131 D134 D144 D
10 PR12 PR16 PR
3 3813 6113 8644 1174 3244 4854 6924 8766 0726 3256 440
2 4262 5912 7722 9543 1023 2183 3663 4984 3564 5384 620
1 9112 0412 1842 3272 4442 5352 6522 7563 4323 5753 640
1 6911 8061 9322 0592 1622 2432 3462 4383 0363 1633 220
1 5581 6641 7811 8971 9932 0672 1622 2472 7982 9152 968
1 5291 6331 7471 8621 9552 0282 1222 2052 7462 8602 912
1 4851 5861 6971 8081 8991 9702 0602 1412 6662 7782 828
1 4701 5701 6801 7901 8801 9502 0402 1202 6402 7502 800
1.752.002.252.502.753.003.253.504.504.755.00
MPT-02 156 B 16 PR
6 1336 5756 9627 3487 7358 1228 5098 840
4 4404 7605 0405 3205 6005 8806 1606 400
3 4413 6893 9064 1234 3404 5574 7744 960
3 1643 3923 5913 7913 9904 1904 3894 560
3 0533 2733 4653 6583 8504 0434 2354 400
2 7752 9753 1503 3253 5003 6753 8504 000
2.753.003.253.503.754.004.254.50
MPT-03 156 D 16 PR
6 3836 8437 2457 6488 0508 4538 8559 200
4 5794 9095 1985 4865 7756 0646 3536 600
3 6083 8684 0954 3234 5504 7785 0055 200
3 1913 4213 6233 8244 0254 2264 4284 600
2 9423 1543 3393 5253 7103 8964 0814 240
2 8863 0943 2763 4583 6403 8224 0044 160
2 8033 0053 1823 3583 5353 7123 8894 040
2 7752 9753 1503 3253 5003 6753 8504 000
2.753.003.253.503.754.004.254.50
MPT-06MPT-08
160 A8 16 PR
3 7204 1084 4184 7285 0385 3485 6275 8906 1616 4336 7046 975
3 1203 4453 7053 9654 2254 4854 7194 9405 1685 3955 6235 850
2 7843 0743 3063 5383 7704 0024 2114 4084 6114 8145 0175 220
2 6402 9153 1353 3553 5753 7953 9934 1804 3734 5654 7584 950
2 4002 6502 8503 0503 2503 4503 6303 8003 9754 1504 3254 500
1.752.002.252.502.753.003.253.503.754.004.254.50
MPT-06 166 A8 –
7 3637 5957 9058 215
6 1756 3706 6306 890
5 5105 6845 9166 148
5 2255 3905 6105 830
4 7504 9005 1005 300
4.755.005.256.00
MPT-02 MPT-05MPT-04MPT-03 MPT-06 MPT-07 MPT-08
67
WWW.MITAS-TYRES.COM
66
WWW.MITAS-TYRES.COM
Tire sizeTread
patternType
Rim(permitted)
Tube Flap
New Max. in service Loaded static radius (mm)
Rollingcircumference
(mm)
Treaddepth(mm)
Overall diameter
(mm)
Section width (mm)
Overall diameter
(mm)
Overall width (mm)
10.5 – 20MPT-04
TL9 × 20
(9 – 20 SDC)10.5 – 20 955 270 977 292 440 2 810 21
10.5 – 20
MPT-05TL
9 × 20(9 – 20 SDC)
10.5 – 20 955 270 977 292 440 2 810 16
MPT-07TT
9 × 20 (9 – 20 SDC)
10.5 – 20 955 270 977 292 440 2 810 18
12.5 – 20MPT-03
TL
11 × 20(11; 12 – 20
SDC) – 1 040 325 1 067 351 480 3 060 20
12.5 – 20MPT-05
TL
11 × 20(11; 12 – 20
SDC)
12.5 – 20 (11 – 20) 1 040 325 1 067 351 480 3 060 18
12.5 – 20MPT-04
TL
11 × 20(11; 12 – 20
SDC)
12.5 – 20(11 – 20) 1 040 325 1 067 351 480 3 060 22
14.5 – 20
MPT-03TL
11 × 20(11; 12 – 20
SDC)
14.5 – 20(12.5 – 20) 1 095 355 1 124 383 503 3 220 24
MPT-05 TL
11 × 20(11; 12 – 20
SDC)
14.5 – 20(12.5 – 20) 1 095 355 1 124 383 503 3 220 20
14.5 – 20MPT-04
TL
11 × 20(11; 12 – 20
SDC)
14.5 – 20(12.5 – 20) 1 095 355 1 124 383 503 3 220 25
16/70 – 20(405/70 – 20)
MPT-02TL
13 × 20(13 – 20 SDC) – 1 076 407 1 116 440 495 3 165 28
MPT-04TL
13 × 20(13 – 20 SDC) – 1 076 407 1 116 440 495 3 165 26
Treadpattern
Service description
LI / SS
Plyrating
Tire load capacity (kg) at speed (km/h)Tire
pressure (bar)Static 10 20 30 40 50 60 65 70 80 90
MPT-04 131 D 10 PR
3 3123 4963 6803 8644 0714 2784 485
2 3762 5082 6402 7722 9213 0693 218
1 8721 9762 0802 1842 3012 4182 535
1 6561 7481 8401 9322 0362 1392 243
1 5261 6111 6961 7811 8761 9722 067
1 4981 5811 6641 7471 8411 9342 028
1 4541 5351 6161 6971 7881 8791 970
1 4401 5201 6001 6801 7701 8601 950
2.252.502.753.003.253.503.75
MPT-05MPT-07
128 G 10 PR
3 3253 5003 6883 8754 0884 2884 500
2 3942 5202 6552 7902 9433 0873 240
1 9952 1002 2132 3252 4532 5732 700
1 6631 7501 8441 9382 0442 1442 250
1 5301 6101 6961 7831 8801 9722 070
1 4901 5681 6521 7361 8311 9212 016
1 4631 5401 6231 7051 7991 8871 980
1 443 1 519 1 600 1 682 1 774 1 861 1 953
1 4231 4981 5781 6591 7491 8351 926
1 3831 4561 5341 6121 7001 7841 872
1 3301 4001 4751 5501 6351 7151 800
2.252.502.753.003.253.503.75
MPT-03129 G 10 PR 4 513 3 249 2 708 2 256 2 076 2 022 1 986 1 958 1 931 1 877 1 805 3.00
132 G 12 PR 4 7505 000
3 4203 600
2 8503 000
2 3752 500
2 1852 300
2 1282 240
2 0902 200
2 0622 170
2 0332 140
1 9762 080
1 9002 000
3.253.50
MPT-05 132 G 12 PR4 5134 7505 000
3 2493 4203 600
2 7082 8503 000
2 2562 3752 500
2 0762 1852 300
2 0222 1282 240
1 9862 0902 200
1 9582 0622 170
1 9312 0332 140
1 8771 9762 080
1 8051 9002 000
3.003.253.50
MPT-04
132 D 10 PR 4 4394 600
3 1853 300
2 5092 600
2 2202 300
2 0462 120
2 0072 080
1 9492 020
1 9302 000
2.753.00
135 D 12 PR 4 8075 014
3 4493 597
2 7172 834
2 4042 507
2 2152 311
2 1742 267
2 1112 202
2 0902 180
3.253.50
MPT-03MPT-05
136 G 12 PR
4 0884 3754 7005 0005 3005 600
2 9433 1503 3843 6003 8164 032
2 4532 6252 8203 0003 1803 360
2 0442 1882 3502 5002 6502 800
1 8802 0132 1622 3002 4382 576
1 8311 9602 1062 2402 3742 509
1 7991 9252 0682 2002 3322 464
1 7741 8992 0402 1702 3002 430
1 7491 8732 0122 1402 2682 397
1 7001 8201 9552 0802 2052 330
1 6351 7501 8802 0002 1202 240
1.752.002.252.502.753.00
MPT-04
139 D 12 PR
4 6694 9915 2905 589
3 3503 5813 7954 010
2 6392 8212 9903 159
2 3352 4962 6452 795
2 1522 3002 4382 576
2 1112 2572 3922 527
2 0502 1922 3232 454
2 0302 1702 3002 430
2.252.502.753.00
142 D 14 PR 5 8426 095
4 1914 373
3 3023 445
2 9213 048
2 6922 809
2 6422 756
2 5652 677
2 5402 650
3.253.50
MPT-02MPT-04
148 D 14 PR
5 3595 7396 4866 8667 245
3 8454 1174 6534 9255 198
3 0293 2443 6663 8814 095
2 6802 8693 2433 4333 623
2 4702 6452 9893 1643 339
2 4232 5952 9333 1043 276
2 3532 5202 8483 0153 182
2 3302 4952 8202 9853 150
2.252.503.003.253.50
CONSTRUCTION MULTIPURPOSE
MITAS MPT DIAGONAL SERIES (CONTINUED) MPT-02 MPT-05MPT-04MPT-03 MPT-06 MPT-07 MPT-08
69
WWW.MITAS-TYRES.COM
68
WWW.MITAS-TYRES.COM
Tire sizeTread
patternType
Rim(permitted)
Tube Flap
New Max. in service Loaded static radius (mm)
Rollingcircumference
(mm)
TreaddepthOverall
diameter (mm)
Section width (mm)
Overall diameter
(mm)
Overall width (mm)
16/70 – 20(405/70 – 20)
MPT-05TL
13 × 20(13 – 20 SDC)
16 – 20 1 076 407 1 116 440 495 3 165 22
405/70 – 20(16/70 – 20)
MPT-03TL
13 × 20(13 – 20 SDC)
– 1 076 407 1 116 440 495 3 165 30
18 – 22.5MPT-06
TL14.00 × 22.5 – 1 166 460 1 197 494 542 3 480 26
405/70 – 24(16/70 – 24)
MPT-04TL
13 × 24(13 – 24 SDC) 16/70 – 24 1 178 407 1 218 440 545 3 465 30
Treadpattern
Service description
LI / SS
Plyrating
Tire load capacity (kg) at speed (km/h)Tire
pressure (bar)Static 10 20 30 40 50 60 65 70 80 90
MPT-05 145 G 14 PR6 5506 8887 250
4 7164 9595 220
3 9304 1334 350
3 2753 4443 625
3 0133 1683 335
2 9343 0863 248
2 8823 0313 190
2 8432 9893 147
2 8032 9483 103
2 7252 8653 016
2 6202 7552 900
3.003.253.50
MPT-03 145 G 14 PR6 5506 8887 250
4 7164 9595 220
3 9304 1334 350
3 2753 4443 625
3 0133 1683 335
2 9343 0863 248
2 8823 0313 190
2 8432 9893 147
2 8032 9483 103
2 7252 8653 016
2 6202 7552 900
3.003.253.50
MPT-06 163 A8 16 PR
4 1084 4954 8445 1935 5035 8136 1236 4336 7046 9757 2467 518
3 4453 7704 0634 3554 6154 8755 1355 3955 6235 8506 0786 305
3 0743 3643 6253 8864 1184 3504 5824 8145 0175 2205 4235 626
2 9153 1903 4383 6853 9054 1254 3454 5654 7584 9505 1435 335
2 6502 9003 1253 3503 5503 7503 9504 1504 3254 5004 6754 850
1.752.002.252.502.753.003.253.503.754.004.254.50
MPT-04 151 D 14 PR
6 1186 3256 5097 0157 935
4 3894 5384 6705 0335 693
3 4583 5753 6793 9654 485
3 0593 1633 2553 5083 968
2 8202 9153 0003 2333 657
2 7662 8602 9433 1723 588
2 6872 7782 8583 0813 485
2 6602 7502 8303 0503 450
2.002.503.003.504.00
VARIATION IN LOAD CAPACITY WITH SPEED DEPENDENCE
Speed (km/h) 0 10 20 30 40 50 60 65 70 80 90
Tire speed category
A8 + 55 % + 30 % + 16 % + 10 % (0) – – – – – –
B + 121 % + 60 % + 24 % + 14 % + 10 % (0) – – – – –
D + 130 % + 65 % + 30 % + 15 % + 6 % + 4 % + 1 % (0) – – –
G + 150 % + 80 % + 50 % + 25 % + 15 % + 12 % + 10 % + 8.5 % + 7% + 4% (0)
CONSTRUCTION MULTIPURPOSE
MITAS MPT DIAGONAL SERIES (CONTINUED) MPT-02 MPT-05MPT-04MPT-03 MPT-06 MPT-07 MPT-08
71
WWW.MITAS-TYRES.COM
70
WWW.MITAS-TYRES.COM
MATERIALS HANDLING INDUSTRIAL TIRES
70
WWW.MITAS-TYRES.COM
73
WWW.MITAS-TYRES.COM
72
WWW.MITAS-TYRES.COM
INDUSTRIAL RADIAL TIRES – ALL-STEEL Heavy-duty tires for material handling machinery
Designed for fork lifts, container handlers and terminal tractors Increased tire life guaranteed by advanced tread designExcellent operator comfort thanks to all-steel constructionImproved rolling resistance for lower fuel consumption
FLR-01
High durability
HANDLING
RESISTANCE
SERVICE LIFE
73
WWW.MITAS-TYRES.COM
Tyre Size FLR-01
12.00 R 20 •
75
WWW.MITAS-TYRES.COM
74
WWW.MITAS-TYRES.COM
Tire sizeTread
patternType
Rim (permitted)
New Max. in service Loaded static radius (mm)
Rollingcircumference
(mm)
Treadpatterndepth (mm)
Treaddepth(mm)
Overall diameter
(mm)
Section width (mm)
Overall diameter
(mm)
Overall width (mm)
12.00 R 20FLR-01
TL8.00 – 20
(8.50 V – 20)1 121 318 1 146 334 505 3 180 36 36
Service description
LI / SS
Tire load capacity (kg) at speed (km/h)Tire
pressure (bar)Steering wheel Load wheel Side-loaders Other application
25 35 25 35 Static 25 35 10 40
176 A5
5 1005 3505 5505 8006 0506 2506 5006 8007 100
4 7004 9505 1505 4005 6505 8806 1006 3506 570
6 6006 9007 2007 5707 9508 2508 6008 9009 230
6 4006 6506 9507 3007 6507 9508 2508 5608 880
7 7008 0808 3908 7609 1509 4509 82010 27010 730
5 1005 3505 5505 8006 0506 2506 5006 8007 100
4 7004 9505 1505 4005 6505 8806 1006 3506 570
6 6006 9007 2007 5707 9508 2508 6008 9009 230
4 5504 7504 9505 2005 4505 6505 9006 1006 320
6.06.57.07.58.08.59.09.510.0
MATERIALS HANDLING INDUSTRIAL
MITAS FLR FLR-01
77
WWW.MITAS-TYRES.COM
76
WWW.MITAS-TYRES.COM
Tread pattern designed for heavy duty service. Good directional stability.
Block type tread pattern for heavy duty service in demanding operating conditions. Good traction characteristics and puncture resistance.
Combination of rib/block tread pattern.
Rib/block tread pattern combination providing good traction. Good directional control in various service conditions.
Rib tread pattern designed for normal service conditions. Good vehicle stability and skid resistance.
Higher filling of tread pattern. Tread pattern designed for heavy duty service. Good directional stability
Rib pattern used in 8” tires. Good vehicle stability and skid resistance.
Combination of rib/block tread pattern.
FL-01
FL-02
Longer service life
FORK LIFT DIAGONAL TIRES Good handling in various service conditions
FL-03 FL-06
FL-04 FL-07
FL-05 FL-08
Good stability
Good stability
Longer service life
Tyre Size FL-01 FL-02 FL-03 FL-04 FL-05 FL-06 FL-07 FL-08
4.00 – 8 • •
5.00 – 8 • • •
16 × 6 – 8 •
18 × 7 – 8 •
6.00 – 9 • • •
21 × 8 – 9 •
6.50 – 10 • • •
23 × 9 – 10 •
7.00 – 12 • • •
250/75 – 12 •
23 × 5 • •
7.50 – 15 •
8.15 – 15 • •
250 – 15 •
8.25 – 15 • •
300 – 15 •
79
WWW.MITAS-TYRES.COM
78
WWW.MITAS-TYRES.COM
MATERIALS HANDLING INDUSTRIAL
MITAS FL SERIES FL-02FL-01 FL-05FL-04FL-03 FL-06 FL-07 FL-08
Tire size Tread pattern Type Rim
(permitted)Tube Flap
New Max. in service Loaded static radius (mm)
Minimaldual
spacing(mm)
Treaddepth(mm)
Overall diameter
(mm)
Section width (mm)
Overall diameter
(mm)
Overall width (mm)
4.00 – 8FL-03FL-08
TT3.00 D – 8
3 1/4 I – 8(1) 4.00 – 8 414 112 422 121 188134138
6
5.00 – 8FL-01FL-03FL-08
TT 3.00 D – 8 5.00 – 8 467 132 476 143 208 158
8 (FL-01) 6 (FL-03) 11 (FL-08)
16 × 6 – 8 FL-08 TT 4.33 R – 8 16 × 6 – 8 425 152 434 164 192 175 12
18 × 7 – 8 FL-08 TT 4.33 R – 8 18 × 7 – 8 462 173 471 187 206 199 14
6.00 – 9FL-01FL-02FL-08
TT 4.00 E – 9 6.00 – 9 540 160 551 173 240 19211.5 (FL-01) 10 (FL-02) 13 (FL-08)
21 × 8 – 9 FL-08 TT 6.00 E – 9 21 × 8 – 9 535 200 546 216 234 230 15
6.50 – 10FL-01FL-02 TT 5.00 F – 10
(5.50 F – 10) 6.50 – 10 588 177 600 191 262 212(218)
11.5 (FL-01) 10 (FL-02)
6.50 – 10 FL-08 TT 5.00 F – 10(5.50 F – 10) 6.50 – 10 588 177 600 191 262 212
(218) 14
23 × 9 – 10 FL-08 TT 6.50 F – 10 23 × 9 – 10 595 225 607 243 260 259 16
7.00 – 12FL-01FL-02 TT 5.00 S – 12 7.00 – 12 672 192 685 207 303 230 13 (FL-01)
10 (FL-02)
7.00 – 12 FL-08 TT 5.00 S – 12 7.00 – 12 672 192 685 207 303 230 15
250/75 – 12 (27 × 10 – 12)
FL-08 TT 8.00 G – 12250/75 – 1227 × 10 – 12
(27 × 10 – 12)681 261 697 274 314 293 18
23 × 5 FL-05 TT 3.75 P – 13 23 × 5 635 155 654 167 295 186 9.5
23 × 5 FL-07 TT 3.75 P – 13 23 × 5 635 155 654 167 290 186 9.5
7.50 – 15 FL-08 TT 6.0 – 15(6.5 – 15) 7.50 – 15 772 212 787 229 350 254
(260) 21
8.15 – 15FL-04FL-08 TT 7.0 – 15 28 × 9 – 15 707 216 721 233 322 248 15 (FL-04)
18 (FL-08)
8.25 – 15 FL-06 TT 6.5 – 15 8.25 – 15 836 234 853 253 376 281 12
8.25 – 15 FL-08 TT 6.5 – 15 8.25 – 15 836 234 853 253 376 281 23
250 – 15 FL-08 TT 7.50 – 15 250 – 15 735 250 750 270 340 288 20
300 – 15 (315/70 – 15)
FL-08 TT 8.00 – 15 300 – 15 840 300 857 324 366 345 23
Tread patternService
description LI / SS
Plyrating
Tire load capacity (kg) Tire pressure
(bar)
Load wheel Steering wheel
FL-03FL-08
90 A594 A597 A5
6 PR8 PR10 PR
780870950
600670730
8.009.0010.00
FL-01FL-03FL-08
106 A5 8 PR 1 235 950 8.25
FL-08 113 A5 16 PR 1 495 1 150 10.00
FL-08121 A5125 A5
14 PR16 PR
1 8852 145
1 4501 650
9.0010.00
FL-01FL-02FL-08
118 A5121 A5
10 PR12 PR
1 7151 885
1 3201 450
8.5010.00
FL-08 134 A5 16 PR 2 755 2 120 10.00
FL-01FL-02
122 A5125 A5
10 PR12 PR
1 9502 145
1 5001 650
7.759.00
FL-08
122 A5 10 PR 1 950 1 500 7.75
125 A5 12 PR 2 145 1 650 9.00
128 A5 14 PR 2 340 1 800 10.00
FL-08 142 A5 20 PR 3 440 2 650 10.00
FL-01 FL-02
133 A5134 A5
12 PR14 PR
2 6802 755
2 0602 120
8.509.00
FL-08133 A5134 A5136 A5
12 PR14 PR16 PR
2 6802 7552 910
2 0602 1202 240
8.509.0010.00
FL-08143 A5146 A5152 A5
14 PR16 PR20 PR
3 5453 9004 615
2 7253 0003 550
7.008.0010.00
FL-05106 B118 B
6 PR10 PR
– –
9501 320
6.008.00
FL-07113 A5121 A5
6 PR10 PR
1 4951 885
1 1501 450
5.258.00
FL-08144 A5146 A5
14 PR16 PR
3 6403 900
2 8003 000
9.2510.00
FL-04FL-08
146 A5 14 PR 3 900 3 000 10.00
FL-06 149 A5 14 PR 4 225 3 250 8.00
FL-08 153 A5 18 PR 4 745 3 650 10.00
FL-08 153 A5 18 PR 4 745 3 650 9.50
FL-08 165 A5 22 PR 6 695 5 150 10.00
(1) obligatory for 8 PR and 10 PR
81
WWW.MITAS-TYRES.COM
80
WWW.MITAS-TYRES.COM
CONSTRUCTION TRACTOR INDUSTRIAL TIRES
80
WWW.MITAS-TYRES.COM
83
WWW.MITAS-TYRES.COM
82
WWW.MITAS-TYRES.COM
TRACTOR INDUSTRIAL DIAGONAL TIRES robust and durable tires for construction and road works
Classic version of tread pattern for industrial use.
Robust industrial pattern with higher resistance to puncture and tread wear.
Tread pattern with very good traction and self-cleaning properties.
TI-02 (R-4) TI-06 (R-4)
TI-09 (R-4)
Tread pattern suitable for bigger skid steer loaders and front axles of backhoe loaders or telescopic platforms.
TR-10 (R-4)
High durability
Longer service life
Robust industrial pattern with higher resistance to puncture and tread wear.
TG-01 (R-4)
Industrial tread pattern for use on backhoe loaders with 4 × 4 axles.
TI-04 (R-4)
Designed for 4 × 4
Excellent traction
Tread pattern suitable for backhoe loaders and other types of loaders with excellent self-cleaning properties and reinforced sidewall.
GRIP ’N’ RIDE (R-4)
Excellent traction
Tread pattern with good traction.
TR-09 (R-4)
Tyre Size TI-02 TI-04 TI-06 TI-09 TR-09 TR-10 G‘n‘R TG-01
14 – 17.5 •
12.5/80 – 18 •
16.0/70 – 20 •
16.9 – 24 IND • •
17.5 L – 24 •
19.5 L – 24 IND •
18.4 – 26 IND •
16.9 – 28 IND • •
16.9 – 30 IND •
85
WWW.MITAS-TYRES.COM
84
WWW.MITAS-TYRES.COM
Tire sizeTread
patternType
Rim(permitted)
New Max. in service Loaded static radius (mm)
Rollingcircumference
(mm)
Treaddepth(mm)
Overall diameter
(mm)
Section width (mm)
Overall diameter
(mm)
Overall width (mm)
14 – 17.5TR-10
TL10.50 × 17.5 910 355 932 383 430 2 858 22
12.5/80 – 18TR-09
TL11 × 18(9 × 18) 987 308 1 014 323 465 2 900 25
16.0/70 – 20 TR-09
TL 13 SDC – 20 1 095 408 1 125 450 504 3 220 27
TI-06TI-04TI-02TG-01
TR-10TR-09TI-09
Grip’n’Ride
CONSTRUCTION TRACTOR INDUSTRIAL
MITAS TI DIAGONAL SERIES
Servicedescription
LI / SS
Plyrating
Tire load capacity (kg) – free rolling / drive wheels – at speed (km/h) Tire pressure (bar)
10 20 30 40 50
150/139 B 14 PR
3 890 / 2 7604 060 / 2 8904 240 / 3 0304 410 / 3 1654 640 / 3 3454 930 / 3 5655 210 / 3 780
3 505 / 2 4803 655 / 2 6003 820 / 2 7303 970 / 2 8504 175 / 3 0104 435 / 3 2054 685 / 3 400
3 115 / 2 2053 250 / 2 3153 395 / 2 4253 530 / 2 5303 715 / 2 6753 940 / 2 8504 166 / 3 025
2 780 / 1 9702 900 / 2 0653 030 / 2 1653 150 / 2 2603 315 / 2 3903 520 / 2 5453 720 / 2 700
2 500 / 1 7752 610 / 1 8602 725 / 1 9502 835 / 2 0352 985 / 2 1503 170 / 2 2903 350 / 2 430
3.203.503.804.104.505.005.50
138/125 A8 12 PR
2 675 / 1 8902 865 / 2 0153 050 / 2 1703 200 / 2 2353 305 / 2 310
2 405 / 1 7002 575 / 1 8152 745 / 1 9552 880 / 2 0102 975 / 2 080
2 140 / 1 5102 290 / 1 6152 440 / 1 7352 560 / 1 7902 650 / 1 850
1 910 / 1 3502 045 / 1 4402 180 / 1 5502 285 / 1 5952 360 / 1 650
1 720 / 1 2151 840 / 1 2951 960 / 1 3952 055 / 1 4352 125 / 1 485
2.502.803.103.403.70
150/138 A8 14 PR
3 430 / 2 4603 815 / 2 7304 100 / 3 0054 690 / 3 305
3 090 / 2 2103 435 / 2 4553 690 / 2 7004 220 / 2 975
2 745 / 1 9653 050 / 2 1853 280 / 2 4003 750 / 2 645
2 450 / 1 7552 725 / 1 9502 930 / 2 1453 350 / 2 360
2 205 / 1 5802 450 / 1 7552 640 / 1 9303 015 / 2 125
2.002.503.003.50
87
WWW.MITAS-TYRES.COM
86
WWW.MITAS-TYRES.COM
Tire sizeTread
patternType
Rim(permitted)
New Max. in service Loaded static radius (mm)
Rollingcircumference
(mm)
Treaddepth(mm)
Overall diameter
(mm)
Section width (mm)
Overall diameter
(mm)
Overall width (mm)
16.9 – 24 IND TI-04TL
W 15 L × 24(W 14 L × 24)
1 310 429 1 355 463 610 3 865 27
16.9 – 24 TG-01 TL W15Lx24 1 310 429 1 355 463 579 3 798 25
17.5 L – 24 TI-02TL
W 15 L × 24(W 14 L × 24) 1 241 445 1 278 481 580 3 660 28
19.5 L – 24 IND GRIP-n-RIDETL
W 16 L × 24(DW 16 L × 24)
1 314 495 1 356 535 610 3 865 27
18.4 – 26 INDTI-06
TLW 16 L × 26
(W 15 L × 26)1 425 467 1 470 504 665 4 190 29
16.9 – 28 IND TI-06
TLW 15 L × 28
(W 14 L × 28)1 410 429 1 455 463 660 4 160 28
Tread pattern
Service description
LI / SS
Plyrating
Tire load capacity (kg) at speed (km/h)Tire
pressure (bar)Static 10 10 cyclic 20 30 40 50
TI-04 149 A8 12 PR
3 7954 3354 8755 3955 8656 3606 9007 1907 475
2 0652 3552 6502 9303 1903 4553 7503 9054 065
2 4752 8303 1803 5203 8254 1504 5004 6904 875
1 8002 0552 3102 5552 7803 0153 2703 4053 545
1 7151 9602 2052 4402 6502 8753 1203 2503 380
1 6501 8852 1202 3452 5502 7653 0003 1253 250
1 5001 7151 9302 1352 3202 5152 7302 8452 960
1.001.201.401.601.802.002.202.402.60
TG-01 149A6 12 PR
6 5906 7856 9807 185
3 5803 6853 7953 905
4 2954 4254 5554 685
3 1203 2153 3103 405
2 9803 0703 1603 250
2 8652 9503 0353 125
2 6052 6852 7602 840
2,302,402,502,60
TI-02 144 A8 10 PR
4 1954 7005 2055 7116 2166 580
2 5002 8003 1003 4003 7053 920
3 0003 3603 7204 0804 4464 704
2 2502 5202 7903 0603 3353 530
2 0002 2402 4802 7202 9603 135
1 7852 0002 2152 4302 6452 800
1 6051 8001 9952 1852 3802 520
1.101.301.501.702.002.20
GRIP-n-RIDE 151 A8 12 PR
4 5105 0955 6806 2707 0757 5107 935
2 4502 7703 0903 4053 8454 0804 315
2 9403 3253 7054 0904 6154 9005 175
2 1402 4152 6902 9703 3503 5603 760
2 0402 3052 5702 8353 2003 3953 590
1 9602 2152 4702 7253 0753 2653 450
1 7852 0152 2502 4802 8002 9703 140
1.101.301.501.701.902.102.30
TI-06 156 A8 12 PR
5 2005 7956 3606 9007 4207 9358 5709 200
2 8253 1503 4553 7504 0304 3154 6555 000
3 3903 7804 1504 5004 8405 1755 5906 000
2 4652 7453 0153 2703 5153 7604 0604 360
2 3502 6202 8753 1203 3553 5903 8754 160
2 2602 5202 7653 0003 2253 4503 7254 000
2 0552 2952 5152 7302 9353 1403 3903 640
1.101.301.501.701.902.102.302.50
TI-06 152 A8 12 PR
4 3604 9705 5906 1306 6707 0507 2457 7058 165
2 3702 7003 0403 3303 6253 8303 9404 1904 440
2 8453 2403 6454 0004 3504 6004 7255 0255 325
2 0652 3552 6502 9053 1603 3403 4353 6503 870
1 9702 2452 5252 7703 0153 1903 2753 4853 690
1 8952 1602 4302 6652 9003 0653 1503 3503 550
1 7251 9652 2102 4252 6402 7902 8653 0503 230
1.101.301.501.701.902.102.202.402.60
CONSTRUCTION TRACTOR INDUSTRIAL
MITAS TI DIAGONAL SERIES (CONTINUED)
TI-06TI-04TI-02TG-01
TR-10TR-09TI-09
Grip’n’Ride
89
WWW.MITAS-TYRES.COM
88
WWW.MITAS-TYRES.COM
Tire sizeTread
patternType
Rim(permitted)
New Max. in service Loaded static radius (mm)
Rollingcircumference
(mm)
Treaddepth(mm)
Overall diameter
(mm)
Section width (mm)
Overall diameter
(mm)
Overall width (mm)
16.9 – 28TG-01
TLW 15 L × 28
(W 14 L × 28)1 410 429 1 455 463 640 4 190 25
16.9 – 30 IND TI-09
TLW 15 L × 30
(W 14 L × 30) 1 460 429 1 500 463 685 4 300 34
CONSTRUCTION TRACTOR INDUSTRIAL
MITAS TI DIAGONAL SERIES (CONTINUED)
Tread pattern
Service description
LI / SS
Plyrating
Tire load capacity (kg) at speed (km/h)Tire
pressure (bar)Static 10 10 cyclic 20 30 40 50
TG-01 151 A6 12 PR
7 0557 2537 4527 651
3 8343 9424 0504 158
4 6014 7304 8604 990
3 3453 4403 5353 630
3 1953 2853 3753 465
3 0673 1543 2403 326
2 7912 8702 9483 027
2.302.402.502.60
TI-09 154 A8 14 PR
4 7405 2455 7506 3257 0957 4757 9958 3158 625
2 5752 8503 1253 4353 8554 0604 3404 5154 685
3 0903 4203 7504 1254 6254 8755 2105 4205 625
2 2452 4852 7252 9953 3603 5403 7853 9404 085
2 1402 3702 6002 8603 2053 3803 6103 7553 900
2 0602 2802 5002 7503 0853 2503 4753 6153 750
1 8702 0702 2752 5002 8052 9553 1603 2853 410
1.101.301.501.702.002.202.502.702.90
Speed (km/h) 0 10 15 20 25 30 35 40 45 50
Free rollingA8
(40 km/h)
LLV + 65 % + 40 % + 33 % + 26 % + 19 % + 12 % + 5 % (0) − 5 % − 10 %
HLV + 98 % + 68 % + 60 % + 51 % + 43 % + 34 % + 26 % + 20 % + 14 % + 8 %
Drive wheelsA8
(40 km/h)
LLV + 135 % + 40 % + 33 % + 26 % + 19 % + 12 % + 5 % (0) − 5 % − 10 %
HLV + 193 % + 100 % + 90 % + 80 % + 70 % + 60 % + 50 % + 43 % + 36 % + 29 %
LLV – Low Load VariationHLV – High Load Variation, is where the tire load varies by a factor of 2 or more between loaded and unloaded conditions. The inflation pressure for HLV application must be increased,
consult tire manufacturer. In the case of HLV, the maximum distance should not exceed 1 km. For a longer distance, consult tire manufacturer.
TRACTOR INDUSTRIAL – FRONT TIRES VARIATION IN LOAD CAPACITY WITH SPEED DEPENDENCE
Speed (km/h) 0 5 10 15 20 25 30 35 40 45 50
Constant load + 130 % + 45 % + 25 % + 13 % + 9 % + 6 % + 4 % + 2 % (0) − 4 % − 9 %
Cyclic application + 130 % + 67 %* + 50 %** + 34 % + 23 % + 11 % + 7 % + 3 % (0) − 4 % − 9 %
* One way distance 150 m** One way distance 600 m
TI-06TI-04TI-02TG-01
TR-10TR-09TI-09
Grip’n’Ride
91
WWW.MITAS-TYRES.COM
90
WWW.MITAS-TYRES.COM
CONSTRUCTION SKID STEER TIRES
90
WWW.MITAS-TYRES.COM
93
WWW.MITAS-TYRES.COM
92
WWW.MITAS-TYRES.COM
SKID STEER DIAGONAL TIRES for small machines with great performance
Robust industrial pattern with higher resistance to puncture and tread wear.
Tread pattern suitable above all for bigger skid steer loaders and front axles of backhoe loaders or telescopic platforms.
Heavy duty tread pattern, robust reinforced tread lug in the central part, higher resistance to puncture and tread wear. Reinforced sidewall.
Robust tire for extreme conditions. Low void ratio and improved depth increases service life. Excellent self-cleaning properties.
Standard tread pattern with good traction properties and sidewall protection.
SK-01
SK-02
RF
xxxxxxxxxxxxxxx
Reinforced construction
SK-05
BIG BOY
TR-10 (R-4)
Longer service life
Longer service life
Excellent traction
Excellent traction
Tyre Size SK-01 SK-02 SK-05 BIG BOY TR-10
23 × 8.50 – 12 •
27 × 8.50 – 15 •
27 × 10.50 – 15 •
31 × 15.5 – 15 •
10.0/75 – 15.3 IND •
10 – 16.5 • • •
12 – 16.5 • • •
14 – 17.5 •
10.5/80 – 18 •
12.5/80 – 18 •
95
WWW.MITAS-TYRES.COM
94
WWW.MITAS-TYRES.COM
Tire sizeTread
patternType
Rim(permitted)
Tube Flap
New Max. in service Loaded static radius (mm)
Rollingcircumference
(mm)
Treaddepth(mm)
Overall diameter
(mm)
Section width (mm)
Overall diameter
(mm)
Overall width (mm)
23 × 8.50 – 12SK-02
TL7.00 × 12 - 575 214 589 231 258 1 690 13
27 × 8.50 – 15SK-02
TL 7.00 × 15 - 680 214 695 231 317 2 000 14.5
27 × 10.50 – 15SK-02
TL 8.50 × 15 - 683 264 693 268 320 2 140 14.5
31 × 15.5 – 15SK-02
TL 13LB × 15 - 766 384 800 405 360 2 371 23
10.0/75 – 15.3 IND
SK-01TT/TL 9.00 × 15.3 10 – 15 HS
10/75 – 15 780 264 800 277 360 2 295 17
Treadpattern
Service description
LI / SS
Plyrating
Tire load capacity (kg) at speed (km/h) Tire pressure (bar)
10 15 20 30 40 50
SK-0299 A4115 A4
6 PR10 PR
505550650745840930
1 0501 1341 2121 3381 458
470515605695785870980
1 0581 1311 2491 361
420460540620700775875945
1 0101 1151 215
400435515590665735831898960
1 0591 154
1.251.501.752.002.252.502.803.003.203.503.80
SK-0299 A4111 A4
6 PR8 PR
610700790865930990
1 0501 1101 1701 2301 2901 320
570655740805870925985
1 0401 0951 1501 2001 235
510585660720775825880925975
1 0251 0701 100
485555625685735780835875925970
1 0151 045
1.501.752.002.252.502.753.003.253.503.754.004.20
SK-02 106 A6 8 PR
1 1001 1701 2401 3001 3501 400
850900950
1 0001 0501 110
740790820860920990
700750800850900940
3.003.253.503.754.004.20
SK-02 119 A4 8 PR1 4201 5351 690
1 1901 2851 410
1 1351 2251 350
1 0101 0901 200
2.502.753.10
SK-01 127 A6 10 PR
1 4301 5051 5851 6651 7451 8151 8901 9702 0452 120
1 3551 4301 5051 5801 6551 7251 8001 8701 9452 015
1 3001 3701 4401 5151 5851 6501 7201 7901 8601 925
1 1801 2451 3101 3751 4401 5001 5651 6251 6901 750
3.003.253.503.754.004.254.504.755.005.25
CONSTRUCTION SKID STEER
MITAS SK SERIES TR-10SK-05SK-02SK-01BIG BOY
97
WWW.MITAS-TYRES.COM
96
WWW.MITAS-TYRES.COM
CONSTRUCTION SKID STEER
MITAS SK SERIES (CONTINUED)
Tire sizeTread
patternType
Rim(permitted)
Tube Flap
New Max. in serviceLoaded static
radius (mm)
Rollingcircumference
(mm)
Treaddepth(mm)
Overall diameter
(mm)
Section width (mm)
Overall diameter
(mm)
Overall width (mm)
10 – 16.5
SK-02TL
8.25 × 16.5 - 773 264 792 285 345 2 340 22
SK-05TL
8.25 × 16.5 - 805 259 840 280 366 2 355 35
BIG BOYTL
8.25 × 16.5 - 798 259 832 280 366 2 355 19
12 – 16.5
SK-02TL
9.75 × 16.5 - 831 307 851 331 370 2 515 22
SK-05TL 9.75 × 16.5 - 836 305 873 329 384 2 475 35
BIG BOYTL 9.75 × 16.5 - 841 315 879 340 384 2 475 20.6
14 – 17.5TR-10
TL 10.50 × 17.5 - 910 355 932 383 430 2 858 22
10.5/80 – 18BIG BOY
TL 9 × 18 - 907 274 927 292 411 2 645 26
12.5/80 – 18BIG BOY
TL 9 × 18 - 991 307 1 014 323 445 2 865 28
Treadpattern
Service description
LI / SS
Plyrating
Tire load capacity (kg) at speed (km/h) Tire pressure (bar)
10 15 20 30 40 50
SK-02BIG BOY
131 A3 8 PR
1 6401 7301 8251 9152 0052 090
1 5301 6151 7001 7851 8701 950
1 3651 4401 5201 5951 6701 740
1 1951 2651 3351 4001 4651 525
2.502.753.003.253.503.75
SK-05 135 A3 10 PR2 1002 2152 330
1 9602 0702 180
1 7501 8451 945
1 5401 6451 710
4.504.755.00
SK-02BIG BOY
140 A3 10 PR
2 0752 2102 3302 4402 5252 5752 6352 690
1 9352 0602 1702 2802 3602 4002 4502 500
1 7301 8401 9402 0352 1052 1452 1952 240
1 5201 6151 7001 7851 8451 8801 9251 965
2.502.753.003.253.504.004.254.50
SK-05BIG BOY
144 A3 12 PR
2 7752 8602 9603 025
2 5702 6502 7402 800
2 3102 3852 4602 520
2 0352 1002 1652 220
4.755.005.255.50
BIG BOY 147 A3 14 PR3 1203 2203 320
2 8902 9803 075
2 6002 6803 010
2 2902 3602 650
5.756.006.20
TR-10 139 B 14 PR
2 7602 8903 0303 1653 3453 5653 780
2 4802 6002 7302 8503 0103 2053 400
2 2052 3152 4252 5302 6752 8503 025
1 9702 0652 1652 2602 3902 5452 700
1 7751 8601 9502 0352 1502 2902 430
3.203.503.804.104.505.005.50
BIG BOY 115 A8 10 PR
1 2901 4301 5601 700
1 1601 2851 4051 530
1 0301 1451 2501 360
9201 0201 1151 215
875970
1 0601 155
2.803.103.403.70
BIG BOY 128 A8 14 PR
1 7501 9602 1702 2702 3502 4352 520
1 5751 7651 9552 0402 1202 1902 270
1 4001 5701 7351 8151 8801 9502 015
1 2501 4001 5501 6201 6801 7401 800
1 1901 3301 4751 5401 5951 6551 710
2.502.803.103.403.704.004.30
TR-10SK-05SK-02SK-01BIG BOY
99
WWW.MITAS-TYRES.COM
98
WWW.MITAS-TYRES.COM
ERL-20 14
EM-02 24 / 54
EM-30 (NB 57) 28 EM-23 36
COMPACTOR 40
CR-01 48 CR-02 48
ERL-30 14 ERD-20 20
EM-60 28
TG-02 40
MPT-20 54
ERL-40 14 ERD-30 20
EM-70 28
NB 38 36
UK 5 40
MPT-21 54
ERL-50 14
ERD-40 20
EM-80 28
NB 38 EXTRA ML 36
UK 10 40
ERD-45 20 EMR-01 14 EM-01 24 EM-20 (NB 38) 28
EM-22 36
NB 57 36 TR-12 / TI-12 36
SRT2 54
MPT-06 60
FL-05 76
TR-10 82 / 92
SK-05 92
FL-01 76 FL-02 76 FL-03 76 FL-04 76
FL-07 76 FL-08 76FL-06 76
TI-04 82 TI-06 82TI-02 82 TI-09 82
TG-01 82
SK-01 92 SK-02 92
GRIP ’N’ RIDE 82
TR-09 82
BIG BOY 92
MPT-07 60 MPT-08 60
MPT-02 60 MPT-03 60 MPT-04 60
MPT-05 60
EARTHMOVER TIRES MULTIPURPOSE TIRES (CONTINUED)
INDUSTRIAL TIRES
TRACTOR INDUSTRIAL TIRES
SKID STEER TIRES
CRANE TIRES
MULTIPURPOSE TIRES
FLR-01 72
PAGE NUMBERS TO BE AMENDED ONCEPAGINATION IS FINALISED
101
WWW.MITAS-TYRES.COM
100
WWW.MITAS-TYRES.COM
USE AND MAINTENANCE
100
WWW.MITAS-TYRES.COM
103
WWW.MITAS-TYRES.COM
102
WWW.MITAS-TYRES.COM
?
OIL
kg?
OIL
kg?
OIL
kg ?
OIL
kg
?
OIL
kg
?
OIL
kg
Check inflation pressure regularly
Avoid contact with grease, oil and other
chemicals
Inspect tyres for damage and
irregularities
Observe tyre and vehicle load limits
Read safety and maintenance
recommendations
Use only authorised
repair
Storage
• Keep the tyres clean and away from heat, light, ozone or hydrocarbon sources.
• Avoid prolonged exposure of the
tyres to direct sunlight. • Avoid any contact with grease,
petrol, volatile solvents or other substances that may deteriorate the rubber.
• Avoid horizontal storage for tubeless
tyres, only small size tyres may be stacked or stored flat (maximum 6 months).
• When tyres are stored flat
(horizontal), the position must be lug against lug.
• Reduce inflation pressure when tyres
are stored fitted on rims. • Ensure there is no water or moisture
inside the tyre. • Never store tyres directly in contact
with the ground for long periods
Tyre repairs • For safety reasons, repairs should
only be carried out by specialists using the correct tools.
Proper use of tyres • When loading tyres you have to
consider the correlation between speed, inflation pressure and load capacity.
• Overloading results in premature
tyre failure. Use the technical documentation and inflation tables which show the load and pressure figures for different operating speeds.
• Underinflation results not only in
incorrect tread wear but also in ply separation and eventually further damage to the ply.
• Overinflation makes the tyre stiff and
decreases its resistance against hits, leading to ply tear.
Fitting and removal instructions
Demounting and mounting procedures can be dangerous, and should be performed only by trained and qualified staff, using proper tools and procedures. Failure to comply with these procedures may result in faulty positioning of the tyre on the rim, and cause the tyre to burst with explosive force leading to serious physical injury or death.
Fitting
1. Make sure that the rim, the tyre and the tube are compatible.
2. Check that the tyre is suitable
for the machine. Use only rims recommended or permitted by the tyre manufacturer.
3. Always use the proper specialised
equipment and tools. 4. The rim must be clean and in
perfect condition (no damage, etc.). If necessary, clean the rim thoroughly with a wire brush. Never fit a tyre onto a rim that shows cracks, significant distortion, evidence of welded repair, etc.
5. Thoroughly inspect the inside as
well as the outside of the tyre in order to identify any damage which may be present. If the damage is considered to be beyond repair, the tyre should be scrapped.
6. If fitting with a tube, always use
the correct new tube and flap for the tyre size. For fitting tubeless tyres without tubes, on tubeless rims, always use a new tubeless valve.
7. Before fitting, lubricate the rim
and the beads. Use only a suitable lubricant that will not damage the tyre (never use silicone or petroleum-based products).
8. We recommend vertical fitting.
In case of horizontal fitting it is impossible to see if the lower bead is correctly seated.
9. Fit the tyre on the rim diametrically
opposite to the valve hole (respect, if present, the rotation direction indicated by the arrows). With the help of a suitable lever and closely repeated applications, get the first bead over the rim flange. Then pose the lightly inflated talc coated tube (if fitted) inside the tyre. Locate the valve, fitting the ferrule loosely. Fit the second bead, lever it progressively over the rim flange, finish at the valve.
10. For seating the beads and centring
of the tyre, remove the valve core. Slowly inflate to ensure correct seating of the beads. Ensure that the beads do not pinch the tube.
11. During tyre inflation keep at a
safe distance and always use a safety cage. If possible, fasten the tyre to the wall or use retaining chains. During pressure readings ensure that no part of the body is within the possible trajectory of the valve mechanism or of the caps. It is recommended to use suitable pressure limitation gauges. Use a filter and dehumidifier on the compressed air line to avoid introducing humidity or dirt. Never use a hammer to make a tyre bead seat by hitting it.
12. Continue inflation. Make sure that
you do not inflate beyond 2.5 bar if the beads are not well seated and centred on the wheel.
13. If the beads are not correctly
seated, deflate, lubricate and inflate again. Repeat these operations until the beads are correctly seated.
14. When all the previous operations
have been correctly done refit the valve core. Set the pressure according to the load – see tables in technical databook.
15. Make sure the valves do not touch
the rims, the brake drums or other fixed mechanical parts.
Removing • Never try to unseat the beads of
an inflated tyre. • Always remove the valve core. • Let the tyre deflate, check
before unseating that the tyre is completely deflated. Never use tools that could damage the rims or the beads of the tyre.
105
WWW.MITAS-TYRES.COM
104
WWW.MITAS-TYRES.COM
L-5L-4L-2 L-3
Earthmover tyres
“L” series type tyres
“L“ series type tyres are used on all size loaders and dozers in off-road applications. Most loader type tyres, because of their extremely heavy construction, are limited to very low speeds and very short haul distances, 10 km/h and 250 m maximum.
Wheeled Loader Wheeled Digger
Loader Service: Closed working cycle Low speed – up to 10 km/h Short distance – up to 250 m Load and Carry Service: Picks up and transports material Low speed – up to 25 km/h Short distance – cycle length up to 600 m
Dozer Service: Pushes or grades material Low speed – up to 10 km/h Travel distance varies
“L” series tyres are categorized by number code, type and tread depth.
Number Code Type Tread Depth
L-2 Traction Design Regular Tread Depth
L-3 Rock Design Regular Tread Depth
L-4 Rock Deep Design Tread Depth 150%
L-5 Extra Rock Deep Design Tread Depth 250%
“L” Series Tyres
Traction Rock Resistance Tread Wear Lug to Void Ratio
L-2 120 90 90 1 : 1
L-3 100 100 100 1 : 2
L-4 90 110 110 1 : 3
L-5 80 120 110 1 : 4
Below are examples of Mitas “L” Series tyres
The letter designation and number code is found on the sidewalls of tyres. The L-2 traction design tyre gives maximum traction in sand and soft soil conditions. The L-3 rock design offers good traction and rock resistance in general purpose loader operations. The L-4 rock deep tread offers excellent tyre life. The L-5 extra Rock deep tread offer high resistance to cutting.
These illustrations show different lug to void ratios.
VoidLug
TRACTION TYPE L-2 DESIGN
ROCK TYPE L-3 DESIGN
ROCK DEEP TYPE L-4 DESIGN
EXTRA ROCK DEEP TYPE L-5 DESIGN
MITAS has also developed comparison ratings for “L” series type tyres. Note: The numbers are relative ratings with the L-3 tyre rated at 100. For example, the L-2 tyre has 20 % better traction than the L-3. Certain tyre construction features and applications can affect these ratings.
The data below could vary from operation and / or from size to size of tyre.
“E” series type tyres
The “E” series type tyres are referred to as haulage tyres in off-road earthmoving applications. These tyres transport material over uneven surfaces at speeds under 50 km/h and short distances, up to 4 km one way. The machine returns unloaded to the loading point.
Dump Truck Articulated Dump Truck Scraper
Transport service: Transport of material Speed up to 50 km/h Distance up to 4 km (length of working cycle)
107
WWW.MITAS-TYRES.COM
106
WWW.MITAS-TYRES.COM
E-2 E-3 E-4
Earthmover tyres (cont)
“E“ series tyres are categorized by number code, type and tread depth.
Number Code Type Tread Depth
E-2 Traction Design Regular Tread Depth
E-3 Rock Design Regular Tread Depth
E-4 Rock Deep Design Tread Depth 150%
Below are examples of Mitas “E” Series tyres
Determining Inflation Pressures for Loaders 1 – By weighing the machine axle• Determine the maximum load on each tyre by weighing, this is the only way
of setting tyre pressures accurately for optimum performance• Use the table “Variation in load capacity with speed” for LOADERS to determine
the pressure Front axle: for laden front axle (bucket full) Rear axle: for unladen rear axle (bucket empty)
2 – By calculation, using the machine manufacturer’s dataWhen the machine is loading with the bucket penetrating into the material, the loader is often on the point of tipping.It is in this state that the front tyres are most heavily laden.• Determine the maximum load / tyre on the front and rear axles
FRONT axleThe load on the front axle is equal to the total unladen weight of the machine + the tipping load (tipping load is shown in machine manufacturer’s data).
REAR axle (bucket empty)• Use either the unladen rear axle load given by the machine manufacturer, or• Take 60 % of the unladen weight of the machine (to have a margin of safety)
Example calculation (for a loader with the following characteristics):Tyre equipment: 23.5 – 25 16 PR EM-30 TLUnladen weights: Front: 8 000 kg (1) Rear: 8 500 kg (2) Total: 16 500 kg (3) Straight line tipping load: 13 900 kg (4) Maximum axle load – Front (static*) Maximum axle load – Rear(3) + (4) = 30 400 kg or 15 200 kg per tyre (2) = 8 500 kg or 4 250 kg per tyre Base pressures as per table “Variation in load capacity with speed” Front = 300 kPa (* increase for static load from 10 km /h is 60 %, 15 200 / 1.6 = 9 500 kg) Rear = 250 kPa (calcuated with a margin of safety for speed 25 km/h)
Rear Axle Load STLStatic Tipping Load
L L
Rear Axle Load STLStatic Tipping Load
L L
Important
The rule to determine pressures by calculation applies to loaders of standard specifications, which have not been modified for special use. The calculated pressures are the minimum for the loads and may be increased to obtain a desired level of handling, or for particular applications, (but must remain within the published load / pressure schedule for the tyre size and type). In the case of long travel distances (e. g. delivery of new machine, transfer from one site to another, etc.), specific precautions need to be taken: Vehicles in Transit • Vehicles must be empty during transit• Set inflation pressure on cold tyres
to the maximum value permitted by the table “Variation in load capacity with speed” for loaders
• Maximum vehicle speed 35 km/h• Cooling stop 30 minutes after each 50 km transit• Transit to a distance longer than
100 km is not recommended and the vehicle must be transported on a trailer
The inflation pressure will increase during roading of the vehicles. The pressure must not be lowered when tyres are warm.
Determining Inflation Pressures for Dozers: Depending on the type of work, tyres on a dozer are subjected to different types of loading.• The load on the Front Axle is
maximum when loading (pushing) a scraper
• The load on the Rear Axle is maximum when dozing or whilst stockpiling
From a practical viewpoint, the maximum load on either of the two axles is approximately equal to 2 / 3 of the machine weight.• Using this method determine the load on each tyre• Use the table “Variation in load capacity with speed” Determining Inflation Pressures for Telescopic Handlers In the case of telescopic handlers the pressures recommended by the machine manufacturer should be used. These pressures are determined by the machine manufacturer after conducting a “Tilt Test” for stability. In the absence of the machine manufacturer’s recommendation, use the pressure corresponding to the maximum normalised load as shown in the table “Variation in load capacity with speed” for LOADERS for both front and rear tyres.
109
WWW.MITAS-TYRES.COM
108
WWW.MITAS-TYRES.COM
TKPH value is an indicator of the tyre’s transport capacity and provides a means of achieving optimum performance from MITAS Earthmover Radial tyres. As tyres have a limited resistance to heat, it is necessary to restrict the amount of hours worked to avoid over heating when the vehicle is operating under given conditions.The TKPH value specifies the numbers of working hours that should be followed.
In order to choose the optimum tyre for the job the TKPH value for the tyre and TKPH value for the operation should be compared.
Ton – Kilometer – Per Hour (TKPH) values
Tyre Dimension Tread Pattern
Average Speed Load Capacity at 50 km/h
(tonsTKPH Value
> 5 Km 5-10 Km 10 Km >
17.5 R 25 ERL-20 35 32 29 4.13 116
17.5 R 25 ERL-30 32 29 26 4.13 106
20.5 R 25 ERD-20 35 32 29 7.30 204
20.5 R 25 ERD-30 32 29 26 7.30 187
23.5 R 25 ERD-20 35 32 29 9.25 259
23.5 R 25 ERD-30 32 29 26 9.25 237
23.5 R 25 ERD-40 29 26 24 9.25 215
26.5 R 25 ERD-30 31 27 24 11.50 285
26.5 R 25 ERD-40 29 26 24 11.50 267
750/65 R 25 ERD-30 29 26 24 10.60 246
29.5 R 25 ERD-30 29 26 23 14.00 325
18.00 R 33 ERD-45 29 26 23 10.90 253
3. TKPH-comparison
The values for TKPHtyre and TKPHin operation should be compared to determine the most suitable tyre fitment for the operating conditions.
Tyre is suitable if: TKPHtyre ≥ TKPHin operation
Tyre is unsuitable if: TKPHtyre ≤ TKPHin operation
4. Limitation in operation 4.1. If the cycle is longer than 5
kilometers (back and forth), the following formula should be used:
TKPH = TKPHtyre × 0.88
4.2. To find TMPH (tonnes-mile per hour), the value TKPH should be multipled by factor 0.685:
TMPH = TKPH × 0.685.
1. Finding the tyre’s TKPH value The tyre’s TKPH value is determined by the following formula:
TKPHtyre = 0.8 × QL ×VAlloved QL = Tyre Loading in tons at speed 50 km/h
Valloved = Allowed average speed in km/h
To determine the average speed of an EM Radial tyre the value from table should be used. The calculation is based on outside temperature about 38 °C and a round trip distance of max. 5 kilometers (one way loaded and return empty)
2. Finding of TKPH value for the operation
The TKPH in operation shows the specific operational requirements and is calculated by the following formula:
TKPHin operation = (QLoaded + Qempty)/2 × (n × L)/h
QLoaded= tyre loading when the vehicle is loaded Qempty = tyre loading when the vehicle is empty n = number of cycles per working day L = distance of cycle in kilometers (back and forth) h = number of working hours per day
111
WWW.MITAS-TYRES.COM
110
WWW.MITAS-TYRES.COM
Terms and shortcuts used in this catalogue
Acronyms Meaning Definition
PR Ply Rating Identifies different versions (load capacity/inflation pressure) of tyres having the same size designation.
TYPE Tubeless or Tube TypeTubeless (TL) - Tyres specifically designed for fitment without an inner tube on appropriate rims. Tubeless tyres may be used with a tube.
LI Load IndexIs a numerical code associated with the maximum load a tyre can carry at the speed indicated by its Speed Symbol under service conditions specified by the tyre manufacturer.
SS Speed SymbolIndicated the maximum speed at which the tyre can carry a load corresponding to its Load Index under service conditions specified the tyre manufacturer.
Free Rolling Wheels Free rolling wheels, that not transmit motion, e.g. trailer
Drive Wheels Drive wheels, that transmit motion, e.g. drive wheel axle on tractors
RIM Recommended Rim The rim which gives the best fitment of the tyre for all conditions and types of service.
RIM (PERMITTED) Permitted RimAny rim which can be permitted in addition to the recommended rim.
New Tyre Dimensionshe dimensions of an unloaded new tyre mounted on its Measuring Rim at the recommended inflation pressure and allowed to stand for a minimum of 24 hours at normal room temperature before readjustment of the pressure back to its original level.
Section Width (design)
The linear distance between the outsides of the sidewalls of an inflated new tyre excluding elevations due to labelling (marking), decorations, or protective bands or ribs.
Overall Diameter (design)
The diameter of an inflated tyre at the outermost surface of the tread.
Static Radius (theoretical nominal)
The radius of the new tyre loaded at the maximum load capacity and with the corresponding tyre pressure.
Rolling Circumference (theoretical nominal)
The circumference of the tyre loaded at the maximum load capacity and with the corresponding tyre pressure.
Acronyms Meaning Definition
LOAD CAPACITY Tyre Load Carrying Capacity The maximum load (kg) a tyre is permitted to carry under specified operating conditions. In the case of twin-fitted driven wheels, a factor of 1.76 is applied to the load capacity of a single fitment tyre.
Inflation Pressure The “cold“ pressure (kPa) of the fluid with which the tyre is inflated.
HLV High Load VariationIs where the tyre load varies by a factor of „2“ or more between loaded and unloaded conditions. The inflation pressure for HLV application must be increased, consult tyre manufacturer. In the case of HLV, the maximum distance should not exceed 1 km and maximum speed 10 km/h. For a longer distance or higher speed, consult tyre manufacturer.
Example of purpose: without HLV - normal use with constant load in transport service, on tractor in field service, e.g. trailer, tractor; with HLV - use with various load conditions, factor > 2 between loaded and unloaded, e.g. loaders.
LLV Low Load Variation Standard application with low load difference between loaded and unloaded conditions.
ETRTOThe European Tyre and Rim Technical Organisation
Data in this Technical Databook are relevant with ETRTO standards, the further data you can find there.
Nominal Section WidthThe section width of an inflated tyre mounted on its theoretical rim and indicated in the tyre size designation.
IND
Agricultural tyres for traction wheels for construction applications with load capacities and inflation pressures which differ from those for tyres which the same size designation for use on agricultural tractors.
REINFORCED
Tyres with better protection against tyre damage (puncture). The load capacity and tyre dimensions stay like standard execution.
Your Distributor/Dealer:
www.mitas-tyres.com
EMEA
VO
L1
JUL/
2016