Manufactured exclusively forTallmans Ag Specialty Coatings
Technical questions or comments call 800-677-2468or visit us
online at agspecialty.com
Product UsesUse on properly primed farm equipment, machinery,
tools, vehicles, lawn and garden equipment, and other applications
where a tough, durable finish is required.
New MetalNew tin and steel should be primed with Ag Specialty
Industrial Primer.
Unpainted WoodBare wood should be primed, then finished with one
or two coats of Ag Specialty Industrial Enamel.
Previously Finished SurfacesRemove all loose and peeling paint.
Prime bare spots on wood or metal as new work. Rusted metal should
be scraped and wire brushed to remove all rust and then primed with
Ag Specialty Metal Primer. After primer dries thoroughly, finish
with one or two coats of Ag Specialty Industrial Enamel.
Overapplication or multiple coats applied too soon may result in
extended dry time. For best results, follow label instructions.
Additional Products
Clear Coat 0447Provides additional protection and fade
resistance that can be applied over properly cured and lightly
sanded enamel finishes.
Clear Hardener/Catalyst 7019Available for increased durability,
chemical resistance, and long-termgloss retention.
TR-05 ReducerThis fast drying reducer contributes better flow
and brushing properties when used as recommended.
®
• H E A V Y D U T Y •
Farm & Industrial Use
IndustrIal EnamEl
3686-AS (39931) 5/19
Product and Color Guide
agspecialty.com
®
NOTE: Colors shown are produced as close as modern printing
techniques permit and are only approximate representations of the
actual colors.
®
Ford Red-Orange 5479(601/801 & Newer)
J.I. Case Flambeau Red 5458
MF Red 5467 Ford Red 5480(8N)
IH Red 5455 NH Red 5461(Old IH Red)
Red Primer 5406
Gloss Ag Yellow 3450 (For Use on John Deere Equipment)
AC Persian Orange #1 4477
Gloss Transport Yellow 3459(Federal Yellow)
AC Persian Orange #2 4478
NH Yellow 3464
A.C. Orange 4453
International Yellow 3454
Kubota Orange #2 4474
Cat Yellow 3468
Gloss Ag Green 6451 (For Use on John Deere Equipment)
Ford Blue 7466
Oliver Meadow Green 6469
IH Blue 7460
Oliver Medium Green 6456(Pre-1952 Oliver)
Dark Gray Primer 0405 Satin Black 9472Gloss Black 9463Hi-Heat
Black 9411
Aluminum 2401Hi-Heat Aluminum 2402
Gloss White 1462
Ford Light Gray 0465(1965 and Newer)
J.I. Case Power White 0452
Ford Gray 0457(8N and Pre 1965)
I.H. Off White 0471
MF Flint Gray Metallic 2449
Buckskin Beige 0448
Ford Dark Gray 0475(9N and 2N)
Rustic Brown 8470
Tallmans Ag Specialty Industrial Enamel is custom formulated for
performance that is available in aerosols, quarts, gallons, and
special order five gallon pails. A hardener additive is also
available to improve chemical resistance, gloss, durability, and
cure time.
Product Features• Excellent adhesion • High gloss finish•
Inhibits corrosion • High hiding• Fade resistant • Excellent
leveling• Easy application • Hardener additive
Custom Match Colors Hundreds of custom match colors available
for almost any make of tractor or equipment. Ask a representative
for details.
- PRIMERS -
- FINISH COATS -
