Industrial lubricants catalogue
Repsol’s industrial oils are the perfect solution to lubricate your machinery. We have a wide range of industrial oils that meet the most demanding quality standards and adapt to any specific needs of the machinery, process, or customer.
In this way, we can guarantee that your machinery and equipment is perfectly lubricated and protected, thereby enhancing its functions, improving performance, contributing to energy savings, and extending its service life.
We have our research center, Repsol Technology Lab, at the forefront of R&D+i worldwide. There, our technicians and researchers are constantly striving to improve every product we offer to ensure maximum efficiency, as well as enhanced technical and environmental quality.
We have a wide range of mineral oils formulated using GI base oils obtained in our very own refineries. These top-quality base oils allow Repsol to meet most of the lubrication requirements set by industrial machinery manufacturers.
For more demanding applications that require high antioxidant properties or a lubricant with a long service life, Repsol uses synthetic GIII base oils (also made in our own refineries) to produce Premium lubricants that meet the highest lubrication standards.
We also have synthetic oils made using ester, polyalphaolefin (PAO), or polyalkylene glycol (PAG) base oils for applications that require these types of lubricants with excellent performance.
You can also find a range of biodegradable products that ensure both your machinery and the environment are protected.
INDUSTRIAL LUBRICANTS CATALOGUE
Find out more about the technical characteristics of each lubricant here.
Here you can find out all the details about the lubricant range that meets your needs, as well as the corresponding production process. For more information click on the product range or sector you are interested in.
Ranges Sectors
Cement
Paper mills
Power generation
Chemicals industry
Iron and steel industry
Mining
Gears
Hydraulics
Turbines
Insulating oils
Compressors and refrigeration equipment
Food grade
Metal industry
Gas cogeneration
Special applications
Multi-purpose
Greases
Circulation
Heat transfer
Biodegradable
Food industry
https://www.repsol.com/SA/ProductosyServicios/BuscadorPySLubricantes/
Ranges
Hydraulics
Gears
Turbines
Insulating oils
Heat transfer
Compressors and refrigeration equipment
Metal industry
Special applications
Gas cogeneration
Multi-purpose
Greases
Biodegradable
Circulation
Food grade
Repsol’s hydraulic oils are formulated using specially selected and refined base oils and cutting edge additives that ensure all parts of your machinery are strong and reliable to meet your needs, even in extreme working conditions.
To do so, when developing the hydraulic fluid of each oil, we aim to combine optimal lubrication and anti-wear, fi terability, oxidation stability, demulsibility, and corrosion protection properties, positioning the Company at the forefront of current lubricating oil technology.
Repsol has a wide range of hydraulic oils to meet the needs of all its customers, from conventional oils with state-of-the-art zinc-based anti-wear additives to cutting-edge oils with ashless technology, in addition to biodegradable oils with a high viscosity index or even fire-resistant lubricants.
This all comes with our commitment to sustainability and the environment thanks to the use of regenerated base oils and biodegradable fluids.
HYDRAULICS
Ranges
Hydraulics
Gears
Turbines
Insulating oils
Heat transfer
Compressors and refrigeration equipment
Metal industry
Special applications
Gas cogeneration
Multi-purpose
Greases
Biodegradable
Circulation
Food grade
Conventionalhydraulic Oils Quality Levels ISO Grades Applications
REPSOL ARIES ISO 6743/4 HL, DIN 51524 HL 15, ..., 220Multi-purpose oils that can be used to correctly lubricate
all equipment that does not require a state-of-the-art hydraulic oil and that work at controlled temperatures
and pressures.
REPSOL LIBRA HIDRÁULICO HLP ISO 6743/4 HM, DIN 51524 HLP 32, 46, 68
Oils formulated with top-quality regenerated base oils that meet the maximum performance levels required in
cutting-edge hydraulic circuits.
REPSOL HYDROFLUX EPISO 6743/4 HM, DIN 51524 HLP
AFNOR NF ISO 11158 HM AFNOR NF E 48690/48691
32, …, 100
Lubricant oils formulated with highly refined paraffinic base oils and anti-wear and anti-oxidation additives that
are perfectly balanced to achieve high performance in hydraulic systems that operate at high temperatures
and pressures.
REPSOL TELEX E
ISO 6743/4 HM, DIN 51524 HLPFIVES CINCINNATI P-68, P-69, P-70 PARKER DENISON HF-0, H-1, HF-1
EATON VICKERS I-286-S and M-2950-SAFNOR NF ISO 11158 HM
AFNOR NF E 48690/48691VOITH 3625-006170 (ISO 22)
VOITH 3625-006058, 006072, 006073, 008426 (ISO 32)
VOITH 3625-006091, 006208 (ISO 46)
5, …, 100
Hydraulic oils that meet the quality levels established in the DENISON HF-0 specification. Suitable for use in
circuits that have piston and vane pumps and operate at high pressures, as well as, potentially, elevated
temperatures. Excellent control of varnish formation, thereby improving lubrication in servo valves.
REPSOL HIDRAÚLICO SC
ISO 6743/4 HM, DIN 51524 HLP PARKER DENISON HF-0, H-1 and HF-2
FIVES CINCINNATI P-68, P-69, P-70AFNOR NF ISO 11158 HM
VOITH 3625-006210VOITH 3525-006208
32, 46, 68
Oils with zinc-free (ashless) additives that are suitable for use in lubrication circuits that require an oil with
these characteristics. Cutting-edge lubricants that meet DENISON HF-0 quality levels, suitable for lubricating circuits with demanding filters that operate at high
pressure and temperatures.
VACUUM PUMP OIL ISO 6743/4 HM, DIN 51524 HP 10W, 30 This oil is recommended for use in vacuum pumps, and more specifically for milking machine pumps.
HYDRAULICS
https://www.repsol.com/imagenes/global/en/RP_ARIES_EN_tcm14-190200.pdfhttps://www.repsol.com/imagenes/global/en/RP_LIBRA_HIDRAULICO_HLP_EN_tcm14-189620.pdfhttps://www.repsol.com/imagenes/global/en/RP_HYDROFLUX_EP_EN_tcm14-190154.pdfhttps://www.repsol.com/imagenes/global/en/RP_TELEX_E_EN_tcm14-189628.pdfhttps://www.repsol.com/imagenes/global/en/RP_HIDRAULICO_SC_EN_tcm14-190139.pdfhttps://www.repsol.com/imagenes/global/en/RP_VACUUM_PUMP_OIL_EN_tcm14-190855.pdf
Ranges
Hydraulics
Gears
Turbines
Insulating oils
Heat transfer
Compressors and refrigeration equipment
Metal industry
Special applications
Gas cogeneration
Multi-purpose
Greases
Biodegradable
Circulation
Food grade
Hydraulic Oilswith a high viscosity
indexQuality Levels ISO Grades Applications
REPSOL TELEX HVLPISO 6743/4 HV, DIN 51524 HVLP
FIVES CINCINNATI P-68, P-69, P-70 EATON VICKERS I-286-S and M-2950-S
AFNOR NF ISO 11158 HV AFNOR NF E 48690/48691
15, …, 68
Hydraulic oils with a high viscosity index formulated using highly refined paraffinic base oils and carefully selected additives that
give the lubricant excellent anti-wear and antioxidant properties. They have a viscosity index improver that allows them to
maintain a stable viscosity at a wide range of temperatures. We recommend this product for hydraulic systems with a wide range of operating temperatures as they are exposed to the elements
or function intermittently and are constantly switched on and off, helping cold weather start-ups and protecting equipment.
REPSOL HIDRÓLEOISO 6743/4 HV, DIN 51524 HVLP
AFNOR NF ISO 11158VOITH 3625-008427 (ISO 32)
FIVES CINCINNATI P-68, P-69, P-7032, …, 100
Oils with a high viscosity index that are suitable for operation over a wide range of temperatures, helping start-ups. Oils with zinc-free (ashless) additives that are suitable for the lubrication of hydraulic
circuits that have demanding filter requirements.
BiodegradableOils Quality Levels ISO Grades Applications
REPSOLBIO TELEX
ISO 6743/4 HEES
DIN 51524 HV(exc. resistance to aging)
46, 68Systems located in environmentally
sensitive locations. Used over a wide range of temperatures (from -40 °C to 100 °C)
in severe load and wear conditions.
HYDRAULICS
https://www.repsol.com/imagenes/global/en/RP_TELEX_HVLP_EN_tcm14-189633.pdfhttps://www.repsol.com/imagenes/global/en/RP_HIDROLEO_EN_tcm14-189624.pdfhttps://www.repsol.com/imagenes/global/en/RP_BIO_TELEX_EN_tcm14-190142.pdf
Ranges
Hydraulics
Gears
Turbines
Insulating oils
Heat transfer
Compressors and refrigeration equipment
Metal industry
Special applications
Gas cogeneration
Multi-purpose
Greases
Biodegradable
Circulation
Food grade
HYDRAULICS
Productsfor public works Quality Levels ISO Grades Applications
REPSOL TELEX WDIN 51524 HV
(exc. demulsification)ALLISON C-4
CATERPILLAR T0-2
SAE GRADE10W-20
A hydraulic fluid specially designed to offer excellent performance in public works machinery that operates
outdoors and needs a lubricant that protects equipment in cold start-ups.
TELEX HLPD DIN 51524 HLPD 68Recommended for use in systems that work in severe
conditions where it is difficult to remove water from the lubrication circuit.
EnhancedSafety Quality Levels ISO Grades Applications
REPSOL TELEX HFC ISO 6743/4 HFC, ISO 12922 HFC7TH LUXEMBOURG REPORT 46
An HFC-type (water-glycol mix), fire-resistant fluid recommended to substitute conventional oils in hydraulic applications when a potential oil leak could cause a fire
after coming into contact with hot areas. Self-extinguishing oil.
REPSOL TELEX VULCANO
ISO 6743/4 HFDU, ISO 12922 HFDU7TH LUXEMBOURG REPORT 68
Hydraulic fluid based on HFDU polyol esters. A fluid that strikes the perfect balance between hydraulic system
lubrication and fire resistance. Suitable for use in the most demanding hydraulic circuits (high pressure) close to hot
spots.
https://www.repsol.com/imagenes/global/en/RP_TELEX_VULCANO_EN_tcm14-190146.pdfhttps://www.repsol.com/imagenes/global/en/RP_TELEX_W_EN_tcm14-190399.pdfhttps://www.repsol.com/imagenes/global/en/RP_TELEX_HLPD_EN_tcm14-190163.pdf
Ranges
Hydraulics
Gears
Turbines
Insulating oils
Heat transfer
Compressors and refrigeration equipment
Metal industry
Special applications
Gas cogeneration
Multi-purpose
Greases
Biodegradable
Circulation
Food grade
HYDRAULICS
Product Bulk 1000 L Container 208 L Drum 20 L Drum 5 L Bottle
Telex E 5
Telex E 10
Telex E 15
Telex E 22
Telex E 32
Telex E 46
Telex E 68
Telex E 100
Telex HVLP 15
Telex HVLP 22
Telex HVLP 32
Telex HVLP 46
Telex HVLP 68
PACKAGING
Ranges
Hydraulics
Gears
Turbines
Insulating oils
Heat transfer
Compressors and refrigeration equipment
Metal industry
Special applications
Gas cogeneration
Multi-purpose
Greases
Biodegradable
Circulation
Food grade
HYDRAULICS
Product Bulk 1000 L Container 208 L Drum 20 L Drum 5 L Bottle
Hydraulic SC 32
Hydraulic SC 46
Hydraulic SC 68
Hidróleo 32
Hidróleo 46
Hidróleo 68
Hidróleo 100
Hydroflux EP 32
Hydroflux EP 46
Hydroflux EP 68
Hydroflux EP 100
PACKAGING
Ranges
Hydraulics
Gears
Turbines
Insulating oils
Heat transfer
Compressors and refrigeration equipment
Metal industry
Special applications
Gas cogeneration
Multi-purpose
Greases
Biodegradable
Circulation
Food grade
HYDRAULICS
Product Bulk 1000 L Container 208 L Drum 20 L Drum 5 L Bottle
Libra Hydraulic HLP 32
Libra Hydraulic HLP 46
Libra Hydraulic HLP 68
Telex W
Telex HLPD 68
Telex HFC 46
Bio Telex 46
Bio Telex 68
Telex Vulcano 68
Vacuum Pump oil 10W
Vacuum Pump oil 30
PACKAGING
Ranges
Hydraulics
Gears
Turbines
Insulating oils
Heat transfer
Compressors and refrigeration equipment
Metal industry
Special applications
Gas cogeneration
Multi-purpose
Greases
Biodegradable
Circulation
Food grade
GEARS
The oils designed by Repsol to lubricate enclosed gears include mineral and synthetic oils to cover all application conditions and offer solutions to meet our customers’ needs.
On the basic premises of protecting equipment against wear, all our oils have an optimal mix of additives that allows for an extraordinary load capacity in FZG testing, while also guaranteeing the lubricant’s anti-oxidation and anti-corrosion properties. To do so, synthetic gear oils allow for prolonged periods between oil changes without any loss of lubrication and protection.
Repsol has designed a complete range of lubricating oils to overcome the technical challenges posed by the wide variety of industrial gearboxes. In the gear oils catalogue, you can also find solutions for lubricating equipment at risk of micropitting with Flender-approved products.
Ranges
Hydraulics
Gears
Turbines
Insulating oils
Heat transfer
Compressors and refrigeration equipment
Metal industry
Special applications
Gas cogeneration
Multi-purpose
Greases
Biodegradable
Circulation
Food grade
Gears Quality Levels ISO Grades Applications
REPSOL SUPER TAURO
ISO 6743/6 CKD, DIN 51517 CLP,
AGMA 9005-E02-EP, AIST 224, Five Cincinnati P-Specs
David Brown S1.53.101
68, …, 1000
Oils recommended for the lubrication of all types of industrial gears that work in severe load conditions. Oils
with extraordinary performance in the 4 ball EP test machine, offering unbeatable results compared to other
similar products on the market.
REPSOL SUPER TAURO FND
ISO 6743/6 CKD, DIN 51517 CLP,Flender Rev. 13
320
Oils suitable for the lubrication of wind turbines, cement kiln gears, and paper mills. Excellent
protection against failures due to micropitting. They achieve a mark of > 10 / High in the
Grey Staining test FVA 54/III.
REPSOL SUPER TAURO SINTÉTICO
ISO 6743/6 CKT, DIN 51517 CLP,
AGMA 9005-E02-EP,AIST 224, FIVES CINCINNATI:
P-35 (460), P-59 (320);P-76 (100), P-77 (150), P-74 (220),
SIEMENS MD FOR FLENDER GEAR UNITS REV.16 (ISO 220 A 460 VG)
100, …, 460
Oils formulated with PAO synthetic base oils suitable for use in systems that operate at very high temperatures
with extended oil change periods thanks to its high oxidation stability. They provide excellent protection
against failures due to micropitting. They achieve a mark of > 10 / High in the Grey Staining test FVA 54/III. They
are specially designed to offer prolonged lubrication in equipment that is difficult to access in order to reduce
maintenance shutdowns and maximize profitability. These oils have the quality levels required for use in wind
generator gears.
REPSOL SUPER TAURO PAG
ISO 6743/6 CKPR / CKGR, DIN 51517 CLP,AGMA 250-04,
AIST 224FLENDER (ISO 680 and 1000)
150, …, 1000
Oils formulated with synthetic PAG (polyalkylene glycol) base oils. These lubricants were developed for use in applications that require excellent oxidation stability due to high operation temperatures. Suitable for the
lubrication of drying oven bearings in cement factories. Excellent protection against failures due to micropitting. They achieve a mark of > 10 / High in the Grey Staining
test FVA 54/III.
REPSOL SUPER TAURO GT
ISO 6743/6 CKD, DIN 51517 CLP,
ANSI/AGMA 9005-E02, AIST 224
SIEMENS MD REV. 16 (FLENDER)HANSEN, MOVENTAS, WINERGY, FAG SCHÄFFLER, DAVID BROWN
320
Semi-synthetic oils approved by Flender with improved thermal stability and load capacity compared to mineral oils. Developed for use in wind turbine gears, they extend the time
between oil changes without losing lubricating properties. Excellent protection against failures due to micropitting. They
achieve a mark of > 10 / High in the Grey Staining test FVA 54/III.
GEARS
https://www.repsol.com/imagenes/global/en/RP_SUPER_TAURO_EN_tcm14-190179.pdfhttps://www.repsol.com/imagenes/global/en/RP_SUPER_TAURO_FND_EN_tcm14-190183.pdfhttps://www.repsol.com/imagenes/global/en/RP_SUPER_TAURO_SINTETICO_EN_tcm14-189745.pdfhttps://www.repsol.com/imagenes/global/en/RP_SUPER_TAURO_PAG_EN_tcm14-190187.pdfhttps://www.repsol.com/imagenes/global/en/RP_SUPER_TAURO_GT_EN_tcm14-190662.pdf
Ranges
Hydraulics
Gears
Turbines
Insulating oils
Heat transfer
Compressors and refrigeration equipment
Metal industry
Special applications
Gas cogeneration
Multi-purpose
Greases
Biodegradable
Circulation
Food grade
Product Bulk 1000 L Container 208 L Drum 20 L Drum 5 L Bottle
Super Tauro 68
Super Tauro 100
Super Tauro 150
Super Tauro 220
Super Tauro 320
Super Tauro 460
Super Tauro 680
Super Tauro 1000
Super Tauro FND 320
Super Tauro GT 320
PACKAGING
GEARS
Ranges
Hydraulics
Gears
Turbines
Insulating oils
Heat transfer
Compressors and refrigeration equipment
Metal industry
Special applications
Gas cogeneration
Multi-purpose
Greases
Biodegradable
Circulation
Food grade
Product Bulk 1000 L Container 208 L Drum 20 L Drum 5 L Bottle
Super Tauro Sintético 100
Super Tauro Sintético 150
Super Tauro Sintético 220
Super Tauro Sintético 320
Super Tauro Sintético 460
Super Tauro PAG 150
Super Tauro PAG 220
Super Tauro PAG 320
Super Tauro PAG 460
Super Tauro PAG 680
Super Tauro PAG 1000
PACKAGING
GEARS
Ranges
Hydraulics
Gears
Turbines
Insulating oils
Heat transfer
Compressors and refrigeration equipment
Metal industry
Special applications
Gas cogeneration
Multi-purpose
Greases
Biodegradable
Circulation
Food grade
Repsol’s range of turbine oils covers all the lubrication needs of modern equipment, from the turbines of hydroelectric plants to steam and gas turbines in combined cycle power plants, ensuring the lubricant has a long service life.
All oils fulfill the majority of international quality standards, as well as the most demanding requirements of equipment manufacturers such as Alstom, Siemens, Solar, or General Electric.
The high temperatures that can be reached in some state-of-the-art gas turbine bearings require lubricants that are highly resistant to oxidation. Thanks to the GIII base oils produced in its own facilities, Repsol has a wide variety of high-performance synthetic producesd that can take on the most demanding lubrication challenges.
The range is complemented by a specific oil for the control system of steam turbines, where high temperatures in the servo valves create the need for a specific synthetic fluid.
TURBINES
Ranges
Hydraulics
Gears
Turbines
Insulating oils
Heat transfer
Compressors and refrigeration equipment
Metal industry
Special applications
Gas cogeneration
Multi-purpose
Greases
Biodegradable
Circulation
Food grade
TURBINES
MineralOils Quality Levels ISO Grades Applications
REPSOL ARIES ISO 6743/5 TGA/TSA,
DIN 51515-L-TD, GEK 46506 E
15, ..., 220
Oils designed to lubricate hydraulic turbines that do not have high lubrication needs but require a product that works well in wet conditions. This product is able
to demulsify thanks to the quality of the base oils used, thereby preventing corrosion and the hydrolysis of
additives.
REPSOL TURBO ARIES
ISO 6743/5-TGB/TSA, DIN 51515-L-TD,
ALSTOM HTGD90117, SIEMENS TLV 9013 04/05 (ISO 32 and 46), GEK 46506E, GEK 32568j, GEK 28143b, SOLAR ES9-224AA
Class II
32, 46, 68
Oils specially developed to meet the demands of the manufacturers of steam or hydraulic turbines without a
gearbox that require an oil with a long service life and good antioxidant properties. As they require a hydrodynamic lubrication system, an EP (extreme pressure) additive is not needed in the formulation. These oils remove air very quickly, preventing problems such as foaming and controlling the formation of lacquer, varnish, and other by-products of degradation thanks to the outstanding
quality of the base oils.
REPSOL ARIES TURBO GAS
ISO 6743/5-TGE/TSE, DIN 51515-L-TDP,
SIEMENS TLV 9013 04, GEK 46506E, GEK 32568j, GEK 28143b, GEK 101941A,
SOLAR ES9-224AA Class II
32, 46
Oils developed for use in steam turbines with a gearbox. This type of applications in which the same oil circuit lubricates both the bearing and the gearbox require a
product with carefully selected additives to protect the gear teeth without negatively affecting the lubrication of
the turbine bearing.
https://www.repsol.com/imagenes/global/en/RP_ARIES_EN_tcm14-190200.pdfhttps://www.repsol.com/imagenes/global/en/turbo_aries_tcm14-55012.pdfhttps://www.repsol.com/imagenes/global/en/RP_ARIES_TURBO_GAS_EN_tcm14-189753.pdf
Ranges
Hydraulics
Gears
Turbines
Insulating oils
Heat transfer
Compressors and refrigeration equipment
Metal industry
Special applications
Gas cogeneration
Multi-purpose
Greases
Biodegradable
Circulation
Food grade
TURBINES
High-safetyOils Quality Levels ISO Grades Applications
REPSOL COMANDER BLUE EHC
ISO 6743/5-LTCD, ALSTOM HTGD 690149, GEK 46357,
SIEMENS TLV 9012 0346
Fire-resistant hydraulic fluid (HFDR) formulated with phosphoric acid esters. Recommended for use in the electric
hydraulic control systems of steam turbines, including solenoid valve systems. This oil is approved by Siemens for
this application.
Synthetic Oils Quality Levels ISO Grades Applications
REPSOL TURBO ARIES PLUS
ISO 6743/5 TGB/TSA, DIN 51515 LTGP, GEK 46506D, GEK 32568j, GEK 28143b,
GEK 107395A (ISO 32), GEK 120498, SOLAR ES9-224AA Class II, MAN
10000494596 rev.02
32, 46
Zinc-free oils formulated with hydrotreated group III base oils, specially designed to provide state-of-the-art lubrication in gas and steam turbines or turbochargers
without EP requirements that operate at high temperatures and call for high-performance lubricants. They are characterized by their excellent resistance to
oxidation and chemical degradation, which significantly prolongs their service life.
REPSOL ARIES TURBO GAS CC
ISO 6743/5-TGE/TSE, DIN 51515-L-TGP,
ALSTOM HTGD90117, SIEMENS TLV 9013 04 (ISO 32), GEK 46506E, GEK 32568j,
GEK 28143b, GEK 101941A, GEK 107395A (ISO 32), GEK 120498, GEK 27070, SOLAR ES9-224AA Class II, MAN 10000494596
rev.02
32, 46
Synthetic oils formulated with hydrotreated group III base oils that have exceptional antioxidant properties, allowing
them to fulfill the most recent specifications for gas turbines in TOST and RPVOT testing. The ideal lubricant
for gas turbines with a gearbox that require high thermal stability to withstand the temperatures reached by the bearings, without forgetting the minimum EP additives
necessary to protect the gear teeth.
https://www.repsol.com/imagenes/global/en/RP_ARIES_TURBO_GAS_CC_EN_tcm14-190191.pdfhttps://www.repsol.com/imagenes/global/en/RP_COMANDER_EHC_EN_tcm14-190204.pdf
Ranges
Hydraulics
Gears
Turbines
Insulating oils
Heat transfer
Compressors and refrigeration equipment
Metal industry
Special applications
Gas cogeneration
Multi-purpose
Greases
Biodegradable
Circulation
Food grade
TURBINES
Product Bulk 1000 L Container 208 L Drum 20 L Drum 5 L Bottle
Aries Turbo Gas CC 32
Aries Turbo Gas CC 46
Turbo Aries Plus 32
Turbo Aries Plus 46
Aries Turbo Gas 32
Aries Turbo Gas 46
Turbo Aries 32
Turbo Aries 46
Turbo Aries 68
Turbo Aries EP
Comander Blue EHC 46
PACKAGING
Ranges
Hydraulics
Gears
Turbines
Insulating oils
Heat transfer
Compressors and refrigeration equipment
Metal industry
Special applications
Gas cogeneration
Multi-purpose
Greases
Biodegradable
Circulation
Food grade
Repsol’s oils for compressors and refrigeration equipment are designed to guarantee ultimate reliability and maximize efficiency, as they are key to ensure a smooth operation in industrial plants. Therefore, an essential part of maintenance systems is selecting the right lubrication system.
Repsol has designed a range of high-quality lubricants formulated using well refined base oils and cutting-edge additives. This allows them to meet all requirements of the different types of compressors on the market.
The Repsol lubricants range includes highly-refined paraffinic oils for normal working conditions, as well as other long-life synthetic oils for air compressors operating in more severe conditions.
The range is complemented by oils for refrigeration systems with both synthetic and naphthenic base oils, which are miscible and compatible with the various refrigerant gases commonly used in this type of equipment and ensure the compressor is correctly lubricated at low temperatures.
COMPRESSORSAND REFRIGERATION EQUIPMENT
Ranges
Hydraulics
Gears
Turbines
Insulating oils
Heat transfer
Compressors and refrigeration equipment
Metal industry
Special applications
Gas cogeneration
Multi-purpose
Greases
Biodegradable
Circulation
Food grade
Air Compressors Quality Levels ISO Grades Applications
REPSOL ARIES ISO 6743/3 DAB/DVA/DVC/DVE, DIN 51506 VCL 15, ..., 220The higher viscosity index ensures excellent lubrication of reciprocating compressors. Minimal ash generation to
avoid problems in compressor outlet valves.
REPSOL TURBO ARIES ISO 6743/3 DAA/DAG, DIN 51506 VCL 32, 46, 68, EPLubrication oils suitable for use in screw compressors (ISO 32 and 46) or reciprocating compressors (ISO 68)
that require excellent antioxidant properties and a good lubricant film to prevent wear.
REPSOL ARIES TURBO GAS CC
ISO 6743/3 DAB/DAH, DIN 51506 VDL 32, 46
Oils formulated with hydrotreated group III base oils that afford excellent performance in such severe oxidation
conditions as the lubrication of screw compressors. During the compression stages, the oil travels with air at high
temperatures, and the thermal stability of these lubricants ensures that the oil does not suffer premature degradation and lubricates the bearings correctly, while minimizing ash
formation for 6,000 operational hours.
REPSOL MERAK VDL ISO 6743/3 DAA/DAG, DIN 51506 VDL 32, 46, 68, 100Lubrication of cylinders and rotary or reciprocating compressor mechanisms, whether air or inert gas
compressors that have high discharge temperatures (up to 220 °C).
REPSOL SINTÉTICO THOR
ISO 6743/3 DAB/DAJ/DGE/DVE, DIN 51506 VDL 100
Lubrication of reciprocating compressors that operate in severe conditions, for rotary vane or screw compressors
where the fluid allows for long periods between oil changes. This product can also be used in vacuum pumps
and inert gas compressors.
COMPRESSORSAND REFRIGERATION EQUIPMENT
https://www.repsol.com/imagenes/global/en/RP_ARIES_EN_tcm14-190200.pdfhttps://www.repsol.com/imagenes/global/en/turbo_aries_tcm14-55012.pdfhttps://www.repsol.com/imagenes/global/en/RP_ARIES_TURBO_GAS_CC_EN_tcm14-190191.pdfhttps://www.repsol.com/imagenes/global/en/RP_MERAK_VDL_EN_tcm14-190212.pdfhttps://www.repsol.com/imagenes/global/en/rp_sintetico_thor_en_tcm14-190208.pdf
Ranges
Hydraulics
Gears
Turbines
Insulating oils
Heat transfer
Compressors and refrigeration equipment
Metal industry
Special applications
Gas cogeneration
Multi-purpose
Greases
Biodegradable
Circulation
Food grade
Refrigeration Equipment Quality Levels ISO Grades Applications
REPSOL ICE OIL ISO 6743-3B-DRA,DIN 51503 KAA , KC
32, 46, 68
Naphthenic oils for refrigeration compressors that use freon, R12, R22, ammonia, or carbon dioxide as a refrigerant.
They guarantee that compressors are protected at low temperatures and are highly
miscible/compatible with the gases being used.
REPSOL ICE OIL S
ISO 6743-3B-DRD, DIN 51503KD and approved by several manufacturers,
including DANFOSS COMMERCIAL (scroll and piston) for ISO 32, BITZER (screw), FRASCOLD (piston), BLISSFIELD (piston)
for ISO 68, and DORIN (piston).
32, 68
POE-based synthetic oils for use in compressors that mainly use HFC refrigerants (R-134a). These oils do not
lose viscosity when they come into contact with this type of gases, thereby ensuring that the system is lubricated
correctly.
COMPRESSORSAND REFRIGERATION EQUIPMENT
https://www.repsol.com/imagenes/global/en/RP_ICE_OIL_EN_tcm14-189757.pdfhttps://www.repsol.com/imagenes/global/en/RP_ICE_OIL_S_EN_tcm14-190230.pdf
Ranges
Hydraulics
Gears
Turbines
Insulating oils
Heat transfer
Compressors and refrigeration equipment
Metal industry
Special applications
Gas cogeneration
Multi-purpose
Greases
Biodegradable
Circulation
Food grade
Product Bulk 1000 L Container 208 L Drum 20 L Drum 5 L Bottle
Merak VDL 32
Merak VDL 46
Merak VDL 68
Merak VDL 100
Sintético Thor 100
Aries 15
Aries 22
Aries 32
Aries 46
PACKAGING
COMPRESSORSAND REFRIGERATION EQUIPMENT
Ranges
Hydraulics
Gears
Turbines
Insulating oils
Heat transfer
Compressors and refrigeration equipment
Metal industry
Special applications
Gas cogeneration
Multi-purpose
Greases
Biodegradable
Circulation
Food grade
Product Bulk 1000 L Container 208 L Drum 20 L Drum 5 L Bottle
Aries 68
Aries 100
Aries 125
Aries 150
Aries 220
Ice Oil 32
Ice Oil 46
Ice Oil 68
Ice Oil S 32
Ice Oil S 68
PACKAGING
COMPRESSORSAND REFRIGERATION EQUIPMENT
Ranges
Hydraulics
Gears
Turbines
Insulating oils
Heat transfer
Compressors and refrigeration equipment
Metal industry
Special applications
Gas cogeneration
Multi-purpose
Greases
Biodegradable
Circulation
Food grade
Product Bulk 1000 L Container 208 L Drum 20 L Drum 5 L Bottle
Turbo Aries 32
Turbo Aries 46
Turbo Aries 68
Turbo Aries EP
Aries Turbo Gas CC 32
Aries Turbo Gas CC 46
PACKAGING
COMPRESSORSAND REFRIGERATION EQUIPMENT
Ranges
Hydraulics
Gears
Turbines
Insulating oils
Heat transfer
Compressors and refrigeration equipment
Metal industry
Special applications
Gas cogeneration
Multi-purpose
Greases
Biodegradable
Circulation
Food grade
INSULATING OILS
Repsol’s insulating oils offer top performance, reliability, and safety, making them the most popular choice for use in transformers and switchgear.
Both the Repsol Electra and Repsol Centauro ranges, which have inhibited and non-inhibited products, have a high oxidation stability, good dielectric strength, and excellent properties at low temperatures. They ensure there are no impurities such as dissolved gases, water, or solids in suspension.
In addition, all of these products meet the requirements of international standards such as the IEC 60296 and the ASTM D3487. They have been validated and used by a wide variety of electricity companies and transformer and electrical equipment manufacturers. Furthermore, Repsol Electra 3X Plus meets the requirements of section 7.1 of the IEC 60296 standard, with higher oxidation stability and a low sulfur content.
The range is complemented by two biodegradable products. Repsol Bio Electra and Repsol Bio Electra Synth, formulated with refined vegetable oils and synthetic esters, respectively. Thanks to their chemical composition, they are highly biodegradable and extremely fire-resistant. This makes them highly recommended for use in areas that, apart from demanding technical requirements, call for elevated safety conditions.
Discover all the products in our Insulating Oils Catalogue.
https://www.repsol.com/imagenes/global/en/dielectric_oils_catalog_tcm14-48939.pdf
Ranges
Hydraulics
Gears
Turbines
Insulating oils
Heat transfer
Compressors and refrigeration equipment
Metal industry
Special applications
Gas cogeneration
Multi-purpose
Greases
Biodegradable
Circulation
Food grade
Repsol’s oils are designed for heat transfer processes, which are crucial in a large number of industries.
Repsol has worked on developing efficient lubricants for use in these processes in closed heating systems.
These oils allow for rapid heat transfer, which leads to high energy efficiency. They are characterized by their long service life thanks to their resistance to degradation and to sludge formation.
HEAT TRANSFER
Ranges
Hydraulics
Gears
Turbines
Insulating oils
Heat transfer
Compressors and refrigeration equipment
Metal industry
Special applications
Gas cogeneration
Multi-purpose
Greases
Biodegradable
Circulation
Food grade
Heat Transfer Quality Levels Applications
REPSOL MULTIGRADO TÉRMICO
ISO 6743/12-QB,DIN 51522-Q
Heat transfer fluid with specific additives to obtain high levels of oxidation stability. For use in enclosed circuits that
reach maximum temperatures of 300 °C.
REPSOL MULTIGRADO TÉRMICO SINTÉTICO ISO 6743/12-QC
Synthetic heat transfer fluid with special additives to obtain extraordinary oxidation stability. For use in enclosed
circuits that reach maximum temperatures of 315 °C.
REPSOL HELIOTERMO 2250 UF
ISO 6743/12-QA,DIN 51522-Q
Heat transfer fluid with high oxidation stability. For use in electric radiators.
HEAT TRANSFER
https://www.repsol.com/imagenes/global/en/RP_MULTIGRADO_TERMICO_EN_tcm14-190234.pdfhttps://www.repsol.com/imagenes/global/en/RP_MULTIGRADO_TERMICO_SINTETICO_EN_tcm14-190238.pdfhttps://www.repsol.com/imagenes/global/en/RP_HELIOTERMO_2250_UF_EN_tcm14-190507.pdf
Ranges
Hydraulics
Gears
Turbines
Insulating oils
Heat transfer
Compressors and refrigeration equipment
Metal industry
Special applications
Gas cogeneration
Multi-purpose
Greases
Biodegradable
Circulation
Food grade
PACKAGING
Product Bulk 1000 L Container 208 L Drum 20 L Drum 5 L Bottle
Multigrado Térmico Sintético
Multigrado Térmico
Heliotermo 2550 UF
HEAT TRANSFER
Ranges
Hydraulics
Gears
Turbines
Insulating oils
Heat transfer
Compressors and refrigeration equipment
Metal industry
Special applications
Gas cogeneration
Multi-purpose
Greases
Biodegradable
Circulation
Food grade
CIRCULATION
Repsol’s circulation lubricants provide the strength and reliability required by large bearings.
They also have excellent water removal properties, making them especially suitable for use in damp environments such as paper factories, as well as for general lubrication (with or without high pressure).
They are all prepared in the viscosity grades traditionally used to lubricate rolling mill bearings and meet the requirements of the bearing manufacturer MORGOIL.
Ranges
Hydraulics
Gears
Turbines
Insulating oils
Heat transfer
Compressors and refrigeration equipment
Metal industry
Special applications
Gas cogeneration
Multi-purpose
Greases
Biodegradable
Circulation
Food grade
CIRCULATION
Circulation Quality Levels ISO Grades Applications
REPSOL CIRCULACIÓN
FC class, in accordance with ISO 6743/2.
Meets the requirements of the manufacturers of MORGOIL bearings.
220, 320, 460, 680Fluid for lubricating bearings subjected to severe
operating conditions (such as rolling mills), in addition to industrial gears that work in non-demanding conditions
or the sumps of some compressors.
REPSOL CIRCULACIÓN EP
FD class, in accordance with ISO 6743/2.
Meets the requirements of themanufacturers of MORGOIL bearings.
100, 220, 320, 460Fluid for lubricating bearings subjected to very severe
operating conditions (such as rolling mills), in addition to industrial gears that withstand medium loads.
https://www.repsol.com/imagenes/global/en/RP_CIRCULACION_EN_tcm14-189770.pdfhttps://www.repsol.com/imagenes/global/en/RP_CIRCULACION_EP_EN_tcm14-189774.pdf
Ranges
Hydraulics
Gears
Turbines
Insulating oils
Heat transfer
Compressors and refrigeration equipment
Metal industry
Special applications
Gas cogeneration
Multi-purpose
Greases
Biodegradable
Circulation
Food grade
CIRCULATION
Product Bulk 1000 L Container 208 L Drum 20 L Drum 5 L Bottle
Circulation 220
Circulation 320
Circulation 390
Circulation 460
Circulation 680
Circulation EP 100
Circulation EP 220
Circulation EP 320
Circulation EP 460
PACKAGING
Ranges
Hydraulics
Gears
Turbines
Insulating oils
Heat transfer
Compressors and refrigeration equipment
Metal industry
Special applications
Gas cogeneration
Multi-purpose
Greases
Biodegradable
Circulation
Food grade
Repsol’s Food Grade lubricants meet the most demanding lubrication needs of the food processing industry and its machinery, where lubricants may accidentally come into contact with food items.
This range is able to protect against wear, corrosion, and deposit formation inside machinery in the same way as conventional oils with a special formulation to meet the highest quality standards demanded by the food industry (NSF category H1).
Discover all the products in our Food Industry Lubricants Catalogue.
FOOD GRADE
https://www.repsol.com/imagenes/global/en/food_grade_lubricants_catalog_tcm14-115735.pdf
Ranges
Hydraulics
Gears
Turbines
Insulating oils
Heat transfer
Compressors and refrigeration equipment
Metal industry
Special applications
Gas cogeneration
Multi-purpose
Greases
Biodegradable
Circulation
Food grade
Repsol’s various oil ranges for metal industries cover the majority of current demands in this industry: Repsol Ibercut, Ibertem, Empatem, and Laminox.
The high quality of the base oils and the carefully selected additives make it an excellent choice to optimize any metal industry operations, from the initial extraction and subsequent purification of metals to cutting, polishing, tempering, and corrosion protection operations, including transformation processes such as continuous casting and rolling.
Given the demanding requirements and large number of processes, on many occasions the Repsol team develops ad-hoc products for a specific application.
METAL INDUSTRY
Ranges
Hydraulics
Gears
Turbines
Insulating oils
Heat transfer
Compressors and refrigeration equipment
Metal industry
Special applications
Gas cogeneration
Multi-purpose
Greases
Biodegradable
Circulation
Food grade
Sector Name Viscosity at 40 °CViscosity at 100 °C Applications
CONTINUOUSCASTING
REPSOL EMPATEM
CC-30 GCC-30 GSCC-30 H
CC-50 GS
543211050
8.66128.3
Oils that are specially recommended to help remove melted stainless steel ingots from molds after being
prepared in the furnace.
CUTTING REPSOL IBERCUT
12 AM 20 C30 A20 A
10 AM EPEDM-1EDM-2
112727
22.510
2.333.3
2.84.94.94.42.7-
1.2
Oils for use in the general machining of steel and alloys. Lubrication in chip removal machining mechanisms.
They meet ISO 6743/7 category ISO-L-MHE. EDM-2 meets ISO 6743/7 category ISO-L-MHE.
POLISHING REPSOL METAL200
300
12
12
3
3Oils for polishing stainless steel.
ROLLING REPSOL LAMINOX
1197
G 3000
G 50
10
7.8
4.9
2.65
2.3
1.7
Oils for use in the cold rolling of ferretic and austentic stainless steel with a low carbon content. It meets ISO
6743/7 category ISO-L-MHB.
METAL INDUSTRY
https://www.repsol.com/imagenes/global/en/RP_EMPATEM_CC30_G_EN_tcm14-190356.pdfhttps://www.repsol.com/imagenes/global/en/RP_EMPATEM_CC30_GS_EN_tcm14-190352.pdfhttps://www.repsol.com/imagenes/global/en/RP_EMPATEM_CC30_H_EN_tcm14-190360.pdfhttps://www.repsol.com/imagenes/global/en/RP_IBERCUT_12_AM_EN_tcm14-190332.pdfhttps://www.repsol.com/imagenes/global/en/RP_IBERCUT_20_C_EN_tcm14-190340.pdfhttps://www.repsol.com/imagenes/global/en/RP_IBERCUT_30_A_EN_tcm14-190336.pdfhttps://www.repsol.com/imagenes/global/en/RP_IBERCUT_20_A_EN_tcm14-190581.pdfhttps://www.repsol.com/imagenes/global/en/RP_IBERCUT_EDM_2_EN_tcm14-190344.pdfhttps://www.repsol.com/imagenes/global/en/RP_IBERCUT_EDM_2_EN_tcm14-190344.pdfhttps://www.repsol.com/imagenes/global/en/RP_METAL_200_EN_tcm14-190468.pdfhttps://www.repsol.com/imagenes/global/en/RP_METAL_300_EN_tcm14-190585.pdfhttps://www.repsol.com/imagenes/global/en/RP_LAMINOX_1197_EN_tcm14-190452.pdfhttps://www.repsol.com/imagenes/global/en/RP_LAMINOX_G_3000_EN_tcm14-190456.pdfhttps://www.repsol.com/imagenes/global/en/RP_LAMINOX_G_50_EN_tcm14-190460.pdfhttps://www.repsol.com/imagenes/global/en/RP_EMPATEM_CC_50_GS_EN_tcm14-190903.pdf
Ranges
Hydraulics
Gears
Turbines
Insulating oils
Heat transfer
Compressors and refrigeration equipment
Metal industry
Special applications
Gas cogeneration
Multi-purpose
Greases
Biodegradable
Circulation
Food grade
Sector Name Viscosity at 40 °CViscosity at 100 °C Applications
DEFORMATIONPROCESSES
REPSOL TREFI 20 60 6.5
Oils designed for deformation, stretching, drawing, cupping, shaping, and stamping applications.
PROTECTION REPSOL ANTIX F 11 3Oils to protect against corrosion and displace water. It
meets ISO 6743/8 category ISO-L-REE.
TEMPERING REPSOL IBERTEM
1515-R2434
99-F
24243265215
4.54.55.48.318.5
Oils for steel tempering, with suitable cooling speeds for the corresponding process.
METAL INDUSTRY
https://www.repsol.com/imagenes/global/en/RP_TREFI_20_EN_tcm14-190464.pdfhttps://www.repsol.com/imagenes/global/en/RP_ANTIX_F_EN_tcm14-190348.pdfhttps://www.repsol.com/imagenes/global/en/RP_IBERTEM_15_EN_tcm14-190364.pdfhttps://www.repsol.com/imagenes/global/en/RP_IBERTEM_15_R_EN_tcm14-190368.pdfhttps://www.repsol.com/imagenes/global/en/RP_IBERTEM_24_EN_tcm14-190380.pdfhttps://www.repsol.com/imagenes/global/en/RP_IBERTEM_34_EN_tcm14-190376.pdfhttps://www.repsol.com/imagenes/global/en/RP_IBERTEM_99_F_EN_tcm14-190372.pdf
Ranges
Hydraulics
Gears
Turbines
Insulating oils
Heat transfer
Compressors and refrigeration equipment
Metal industry
Special applications
Gas cogeneration
Multi-purpose
Greases
Biodegradable
Circulation
Food grade
Application Product Bulk 1000 L Container 208 L Drum 20 L Drum 5 L Bottle
Continuous casting Empatem CC 30 G
Continuous casting Empatem CC 30 GS
Continuous casting Empatem CC 30 H
Continuous casting Empatem CC 50 GS
Cutting and polishing of metals Ibercut 10 AM EP
Cutting and polishing of metals Ibercut 12 AM
Cutting and polishing of metals Ibercut 20 A
Cutting and polishing of metals Ibercut 20 C
Cutting and polishing of metals Ibercut 30 A
Cutting and polishing of metals Ibercut EDM 1
Cutting and polishing of metals Ibercut EDM 2
Cutting and polishing of metals Metal 200
Cutting and polishing of metals Metal 300
PACKAGING
METAL INDUSTRY
Ranges
Hydraulics
Gears
Turbines
Insulating oils
Heat transfer
Compressors and refrigeration equipment
Metal industry
Special applications
Gas cogeneration
Multi-purpose
Greases
Biodegradable
Circulation
Food grade
Application Product Bulk 1000 L Container 208 L Drum 20 L Drum 5 L Bottle
Rolling and deformation processes Laminox 1197
Rolling and deformation processes Laminox G 3000
Rolling and deformation processes Laminox G 50
Rolling and deformation processes Trefi 20
Protection Antix F
Tempering Ibertem 15
Tempering Ibertem 15 R
Tempering Ibertem 24
Tempering Ibertem 34
Tempering Ibertem 99 F
PACKAGING
METAL INDUSTRY
Ranges
Hydraulics
Gears
Turbines
Insulating oils
Heat transfer
Compressors and refrigeration equipment
Metal industry
Special applications
Gas cogeneration
Multi-purpose
Greases
Biodegradable
Circulation
Food grade
The different types of Repsol lubricating oils for special applications are developed to cover most of the industry’s needs in any transformation process. From mold release agents to products for valve control, including ad-hoc developments for the specific uses of large customers.
SPECIAL APPLICATIONS
Ranges
Hydraulics
Gears
Turbines
Insulating oils
Heat transfer
Compressors and refrigeration equipment
Metal industry
Special applications
Gas cogeneration
Multi-purpose
Greases
Biodegradable
Circulation
Food grade
Special Applications Quality Levels ISO Grades Applications
REPSOL ZEUS GUÍA
ISO 6743/4-HG (ISO 32 Y 68), DIN 51524, part 2 HLP: ISO 32 and 68,
ISO 6743/13-G, DIN 51517, part 3 CLP: ISO 220,
FIVES CINCINNATI P-47 (ISO 68), P-50 (ISO 220), P-53 (ISO 32)
32, 68, 150, 220Oils for the lubrication of horizontal and vertical machine-tool slideways. The ISO 32 and 68 grades can also be used as a hydraulic fluid in systems that require lubrication of
the slideways, in addition to the hydraulic circuit.
REPSOL HELEN 140/240
DIN 51510 – ZA (grade 140) and ZB (grade 240),
ISO 6743/12 – Q, ISO 6743/6 – CKB
460, 1000
Oils recommended for use in steam machine cylinders, as well as multipurpose lubrication
and gears, or other elements that could operate at high temperatures. They can also be used as
heat transfer fluid in open thermal circuits.
REPSOL ASTRAISO 6743 / 11 – PAC and PBC.
Meets the requirements of the main OEMs: Atlas Copco, Ingersol Rand,
Gardner Denver, etc. 46, 100, 150
Fluid for the lubrication of drills, hammers, and pneumatic tools that operate in severe conditions, as
well as pneumatic mechanisms requiring a product that is able to capture moisture and prevent it from coming into contact with metallic surfaces (demulsification rig
values of 0-0-80 after 30 minutes).
REPSOL GASÓMETRO ISO 6743/2 - FC, DIN 51517part 2-CL, DIN 51524 - HL 68, 100Product specifically designed to seal gas storage tanks.
Stands out due to its excellent demulsibility.
SPECIAL APPLICATIONS
https://www.repsol.com/imagenes/global/en/RP_ZEUS_GUIA_EN_tcm14-189782.pdfhttps://www.repsol.com/imagenes/global/en/RP_HELEN_EN_tcm14-189778.pdfhttps://www.repsol.com/imagenes/global/en/RP_ASTRA_EN_tcm14-189766.pdf
Ranges
Hydraulics
Gears
Turbines
Insulating oils
Heat transfer
Compressors and refrigeration equipment
Metal industry
Special applications
Gas cogeneration
Multi-purpose
Greases
Biodegradable
Circulation
Food grade
Special Applications Viscosity at 40 °C Viscosity at 100 °C Applications
REPSOL DESMOLDOIL 90 11 3.3
Oils formulated to act as a mold release agent on any type of surface, such as metal or iron. REPSOL DESMOLDOIL L 24 4.3
REPSOL DESMOLDOIL PU 9.8 2.7
REPSOL DESMOLDOIL P 24 4.3 Oils formulated to act as an aluminum mold release agent, thanks to their exceptional oiliness.
REPSOL DESMOLDOIL A 22 5.5Water-based mold release oils with appropriate
additives, designed to release pieces of concrete from wood, iron, etc.
REPSOL DESMOLDOIL R 24 4.8Mold release oils formulated using highly refined mineral
base oils and high-quality regenerated base oils that prevent concrete from adhering to formwork.
REPSOL PRO-50 11.5 3.2
Process oils formulated with highly refined paraffinic base oils, which give the product high oxidation stability
at high temperatures.
REPSOL PRO-70 25 4.3
REPSOL PRO-100 62 8.1
REPSOL PRO-150 100 11
REPSOL HIDRAPLATFORM 2.21 -Hydraulic control fluid with a water/glycol base that
is specifically formulated for use in subsea production control systems. It is biodegradable and does not
accumulate on marine surfaces.
SPECIAL APPLICATIONS
https://www.repsol.com/imagenes/global/en/RP_DESMOLDOIL_EN_tcm14-190242.pdfhttps://www.repsol.com/imagenes/global/en/RP_DESMOLDOIL_EN_tcm14-190242.pdfhttps://www.repsol.com/imagenes/global/en/RP_DESMOLDOIL_PU_EN_tcm14-190589.pdfhttps://www.repsol.com/imagenes/global/en/RP_DESMOLDOIL_EN_tcm14-190242.pdfhttps://www.repsol.com/imagenes/global/en/desmoldoil_a_tcm14-190246.pdfhttps://www.repsol.com/imagenes/global/en/RP_DESMOLDOIL_R_EN_tcm14-190328.pdfhttps://www.repsol.com/imagenes/global/en/RP_PRO_EN_tcm14-190922.pdfhttps://www.repsol.com/imagenes/global/en/RP_PRO_EN_tcm14-190922.pdfhttps://www.repsol.com/imagenes/global/en/RP_PRO_EN_tcm14-190922.pdfhttps://www.repsol.com/imagenes/global/en/RP_PRO_EN_tcm14-190922.pdf
Ranges
Hydraulics
Gears
Turbines
Insulating oils
Heat transfer
Compressors and refrigeration equipment
Metal industry
Special applications
Gas cogeneration
Multi-purpose
Greases
Biodegradable
Circulation
Food grade
Application Product Bulk 1000 L Container 208 L Drum 20 L Drum 5 L Bottle
Mold release agents Desmoldoil 90
Mold release agents Desmoldoil A
Mold release agents Desmoldoil L
Mold release agents Desmoldoil P
Mold release agents Desmoldoil PU
Mold release agents Desmoldoil R
Slideways Zeus Guía 150
Slideways Zeus Guía 220
Slideways Zeus Guía 32
Slideways Zeus Guía 68
PACKAGING
SPECIAL APPLICATIONS
Ranges
Hydraulics
Gears
Turbines
Insulating oils
Heat transfer
Compressors and refrigeration equipment
Metal industry
Special applications
Gas cogeneration
Multi-purpose
Greases
Biodegradable
Circulation
Food grade
Application Product Bulk 1000 L Container 208 L Drum 20 L Drum 5 L Bottle
Pneumatic tools Astra 100
Pneumatic tools Astra 150
Pneumatic tools Astra 46
Steam-powered machinery Helen 140
Steam-powered machinery Helen 240
Valve controls Hidraplatform
Gasometer Aceite gasómetro
Gasometer Aceite gasómetro 100
PACKAGING
SPECIAL APPLICATIONS
Ranges
Hydraulics
Gears
Turbines
Insulating oils
Heat transfer
Compressors and refrigeration equipment
Metal industry
Special applications
Gas cogeneration
Multi-purpose
Greases
Biodegradable
Circulation
Food grade
Repsol’s range of oils for gas motors covers the needs for this market, adapting to the demands of each type of customer by motor, type of gas, and application.
Repsol’s constant technological innovation has led to a range of lubricants that perfectly meet the needs associated with gas cogeneration.
They offer significant benefits and are approved by the main motor manufacturers (MWM Deutz, INNIO Jenbacher, MAN, Rolls Royce, WÄRTSILÄ, and Cummins). They also meet the technical requirements established by Caterpillar and Waukesha, among others.
Discover all the products in our Cogeneration Lubricants Catalogue.
GAS COGENERATION
https://www.repsol.com/imagenes/global/en/gas_cogeneration_engines_lubricants_catalog_tcm14-115324.pdf
Ranges
Hydraulics
Gears
Turbines
Insulating oils
Heat transfer
Compressors and refrigeration equipment
Metal industry
Special applications
Gas cogeneration
Multi-purpose
Greases
Biodegradable
Circulation
Food grade
Repsol’s range of multi-purpose lubricants have excellent oiliness and give equipment the protection they need in total loss applications.
It also includes biodegradable fluids that, in addition to protecting the machinery, do not harm the environment.
MULTI-PURPOSE
Ranges
Hydraulics
Gears
Turbines
Insulating oils
Heat transfer
Compressors and refrigeration equipment
Metal industry
Special applications
Gas cogeneration
Multi-purpose
Greases
Biodegradable
Circulation
Food grade
Multi-purpose Applications
REPSOL MULTIUSO EXTRA
Fluid for general lubrication in total loss applications. Highly recommended for the lubrication of chainsaws.
REPSOL VFluid for multi-purpose lubrication with excellent oiliness and
resistance to aging that is suitable for use in total loss applications or with no high demanding requirements.
REPSOLBIO MULTIUSO EXTRA
Biodegradable fluid formulated with plant-based esters for use as a multi-purpose lubricant or in total loss applications.
MULTI-PURPOSE
https://www.repsol.com/imagenes/global/en/RP_MULTIUSO_EXTRA_30_Y_40_EN_tcm14-190221.pdfhttps://www.repsol.com/imagenes/global/en/RP_V_EN_tcm14-190226.pdfhttps://www.repsol.com/imagenes/global/en/RP_BIO_MULTIUSO_EXTRA_EN_tcm14-190216.pdf
Ranges
Hydraulics
Gears
Turbines
Insulating oils
Heat transfer
Compressors and refrigeration equipment
Metal industry
Special applications
Gas cogeneration
Multi-purpose
Greases
Biodegradable
Circulation
Food grade
Multi-purpose
Processes
Product Bulk 1000 L Container 208 L Drum 20 L Drum 5 L Bottle
PRO 100
PRO 150
PRO 50
PRO 70
PACKAGING
PACKAGING
Product Bulk 1000 L Container 208 L Drum 20 L Drum 5 L Bottle
Bio Multiuso Extra 68
Multiuso Extra 30
Multiuso Extra 40
V 46
MULTI-PURPOSE
Ranges
Hydraulics
Gears
Turbines
Insulating oils
Heat transfer
Compressors and refrigeration equipment
Metal industry
Special applications
Gas cogeneration
Multi-purpose
Greases
Biodegradable
Circulation
Food grade
Repsol’s greases are formulated with cutting-edge additives to cover all the market’s needs.
The range of products developed includes multi-purpose greases to meet the lubrication requirements of the majority of facilities, as well as special products designed to work in highly demanding conditions due to the loads, temperatures, or environmental contamination.
Meeting the specifications set by the most stringent quality regulations and standards, thanks to their exclusive formula our greases deliver excellent performance in all types of machinery, increasing their service life and providing extra reliability, making Repsol’s greases the best investment for your business.
Discover all the products in our Greases Catalog.
GREASES
https://www.repsol.com/imagenes/global/en/greases_catalog_tcm14-37191.pdf
Ranges
Hydraulics
Gears
Turbines
Insulating oils
Heat transfer
Compressors and refrigeration equipment
Metal industry
Special applications
Gas cogeneration
Multi-purpose
Greases
Biodegradable
Circulation
Food grade
BIODEGRADABLE
Repsol’s oils for biodegradable products are designed with the challenges facing the industry in mind.
An industry that faces increasingly demanding environmental regulations and requires biodegradable products that do not pollute the environment where they are being used in the event of an accidental spill, also guaranteeing the characteristics required by the machinery.
Ranges
Hydraulics
Gears
Turbines
Insulating oils
Heat transfer
Compressors and refrigeration equipment
Metal industry
Special applications
Gas cogeneration
Multi-purpose
Greases
Biodegradable
Circulation
Food grade
Range Products Applications
HydraulicREPSOL
BIO TELEX 46 and 68
Synthetic and biodegradable fluid designed to replace conventional oils when there is a need for or an interest in biodegradable fluids.
EcoLabel-certified product. ISO HEES.
Multi-purposeREPSOL
BIOMULTIUSO EXTRA 68
Formulated with plant-based esters for use as a multi-purpose lubricant or in total loss applications.
Insulating oils
REPSOL BIO ELECTRA
and REPSOL BIO ELECTRA SYNTH
Both of these biodegradable oils allow for higher safety and display excellent dielectric performance. BIOELECTRA is made using specifically selected plant-based base oils, which gives this product
exceptional oxidation stability. BIOELECTRA SYNTH is designed for extremely cold climates.
GreaseREPSOL
BIOGRASA CÁLCICA EP 2
Formulated using biodegradable products for use in situations where leakages or spills are a possibility, such as dam floodgates, agricultural
machinery, or forest work. EcoLabel-certified product.
BIODEGRADABLE
Ranges
Hydraulics
Gears
Turbines
Insulating oils
Heat transfer
Compressors and refrigeration equipment
Metal industry
Special applications
Gas cogeneration
Multi-purpose
Greases
Biodegradable
Circulation
Food grade
Product Bulk 1000 L Container 208 L Drum 20 L Drum 5 L Bottle 45 kg Drum
Bio Telex 46
Bio Telex 68
Biomultiuso Extra 68
Bio Electra
Bio Electra Synth
Biograsa Cálcica EP 2
PACKAGING
BIODEGRADABLE
PAPER INDUSTRY
Logs
Cleaners
Debarker
Sifting
Mixer
SUPER TAURO
SUPER TAURO
Silo
Water. Fan
Mechanical mill. Wood shredding
Chemicals
Wood chips
Digester. Defibrated pulp
Coating(glossing)
Pulp washing
Chemical pulp
Mechanical pulp
Mixer Pulp whitening
Pulp washing and mixing
Paper roll
Drying, straightening and rolling
Manufacturing table
After the draining press, the water is filtered
Water
Liquid pulp Feeder
Purifier. Refining and sifting process
Mechanical pulp refiners
SUPER TAURO
TELEX EHIDRÁULICO SC
Hydraulic oilsTELEX EHIDRÁULICO SC
Hydraulic oils
CIRCULACIÓNARIESSUPER TAURO SINTÉTICO
Transformers:ELECTRA 3TENSIÓN CENTAURO
Auxiliary equipment:COMPRESSORS TURBINESGREASES
Sectors
Paper mills
Cement
Chemicals industry
Power generation
Mining
Food industry
Iron and steel industry
CEMENT INDUSTRY
CIRCULACIÓN SUPER TAUROSUPER TAURO FND
CIRCULACIÓN
SUPER TAURO
SUPER TAURO
HDDO OILS
SUPER TAURO PAG
CIRCULACIÓN
TELEX E
TELEX E
TELEX E
TELEX E
Electrical filter
Filter
Filter
Packing Loading
Silos.Clinker storage
Silos.Cement storage
Mill. Transforming clinker into cement
Grinding of crude powder
Dryer
Stacker Pre-homogenization
Crusher
Coolers
Furnace. Calcination
GEARBOXES TRANSMISSIONSOTHER ENGINES
Transformers:ELECTRA 3TENSIÓN CENTAURO
Auxiliary equipment:COMPRESSORSGREASES
Sectors
Paper mills
Cement
Chemicals industry
Power generation
Mining
Food industry
Iron and steel industry
CONTINUOUS CASTING AND HOT ROLLING INDUSTRY
Casting ladle
Continuous casting
Hot-rolling
Billets
Cogging train
Roll train
Rolling diagram
Guide roller
Steel rollsHot-rolling
Finishing train
Winder
Ingot or slab
Cutting unit
Soaking pit
Mould
Ingot
HYDRAULIC OILSTELEX E, HIDRÁULICO SC
Auxiliary systems
ELECTRA 3TENSIÓN CENTAURO
Transformers
QUENCHING OILS
COMPRESSORS/TURBINESGREASES
Auxiliary equipment
TELEX HFCTELEX VULCANO
Fire-resistant fluids
CIRCULACIÓNCIRCULACIÓN EPSUPER TAURO
TELEX EHIDROFLUX EP
EMPATEMCast oil
CIRCULACIÓN
SUPER TAURO
In other load moving systems in the plant
HIDRÓLEO
Sectors
Paper mills
Cement
Chemicals industry
Power generation
Mining
Food industry
Iron and steel industry
CHEMICAL, REFINING, FERTILIZER, AND INDUSTRIAL GAS INDUSTRIES
Generation of the mix
Ammonia generation process
Steam
Catalyticconverter · Catalytic converter
· 300 bar
Compressor
Compressor
Compressor
Reactor
Condenser
Refrigerator
Preheater
Catalyticconverter
Reactor
Condenser
Ammonia
Nitrogen [N2], Hydrogen [H2] and Carbonic Anhydride [CO2]
H2O and CO2
N2, H2
Methane (CH4)Water (H2O)
(H2O)
H2OAmmonia
(NH3)
Recycled N2, H2
TELEX EARIES
Hydraulic oils
TELEX ESUPER TAURO
Finish
TURBO ARIES
TURBO ARIES
MERAK VDL
TURBO ARIES
COMPRESSORSTURBINESGREASESOIL FOR TRANSFORMERS
Auxiliary equipment
Sectors
Paper mills
Cement
Chemicals industry
Power generation
Mining
Food industry
Iron and steel industry
POWER GENERATION INDUSTRY
ARIES
ARIESARIES
TURBO ARIESARIES TURBOGASARIES TURBOGAS CCCOMANDER EHC
Transformers:ELECTRA 3TENSIÓN CENTAURO
Auxiliary equipment:GREASESTURBO ARIES
Exhaust gas emissions
Heat exchanger
Steam at pressure
Turbines
Transformer
Power lines
Generator
Condenser
PumpPump
Heaters
Generator
Intake of Fuel
Compressor /Turbocharger
Supply of cold water
Cooling tower
Boiler
Burner
Sectors
Paper mills
Cement
Chemicals industry
Power generation
Mining
Food industry
Iron and steel industry
Sectors MINING, QUARRYING, AND AGGREGATES INDUSTRY
CIRCULATION
SUPER TAURO
SUPER TAUROSUPER TAURO
DIESEL TURBO UHPDDIESEL TURBO THPD
Mobile machinery
Transmissions
TELEX HVLPHydraulic systems
MERAK VDLARIES
Air compressorsTURBINES GREASES
Auxiliary equipment:
GEARBOXESTRANSMISSIONSOTHER ENGINES
Coarse
Primary crushing
Tertiary crushing
Secondary crushing
Fine
Main conveyor belt
Conveyor belt for stockpiles of materials
Silo
Vibrating sifter
Silos
Cone crushers
Vibrating feeder
Jaw crusher
Vibrating sifter
SUPER TAURO
SUPER TAURO
Paper mills
Cement
Chemicals industry
Power generation
Mining
Food industry
Iron and steel industry
The characteristics mentioned in this catalogue are typical values and cannot be considered product specifications.
Botón 2: Página 2: Página 3: Página 51: Página 52: Página 53: Página 54: Página 55:
Botón 1: Página 2: Página 3: Página 51: Página 52: Página 53: Página 54: Página 55:
Botón 10: Página 4: Página 5: Página 6: Página 7: Página 8: Página 9: Página 10: Página 11: Página 12: Página 13: Página 14: Página 15: Página 16: Página 17: Página 18: Página 19: Página 20: Página 21: Página 22: Página 23: Página 24: Página 25: Página 26: Página 27: Página 28: Página 29: Página 30: Página 31: Página 32: Página 33: Página 34: Página 35: Página 36: Página 37: Página 38: Página 39: Página 40: Página 41: Página 42: Página 43: Página 44: Página 45: Página 46: Página 47: Página 48: Página 49: Página 50:
Botón 11: Página 4: Página 5: Página 6: Página 7: Página 8: Página 9: Página 10: Página 11: Página 12: Página 13: Página 14: Página 15: Página 16: Página 17: Página 18: Página 19: Página 20: Página 21: Página 22: Página 23: Página 24: Página 25: Página 26: Página 27: Página 28: Página 29: Página 30: Página 31: Página 32: Página 33: Página 34: Página 35: Página 36: Página 37: Página 38: Página 39: Página 40: Página 41: Página 42: Página 43: Página 44: Página 45: Página 46: Página 47: Página 48: Página 49: Página 50:
Botón 8: Botón 9: Botón 6: