Industrial Plastic Sheet & Lighting
Components Catalogue
www.diffusers.co.nz
Lighting Components• Lenses,PALs,SuspensionKits
• BattenDiffusers• FlexiwrapandBudgetwraps
• TrofferPanels,Frames&LightingFilms
Industrial Plastic Sheeting• HIPS,ABS&AES• Polypropylene• HDPEandLDPE
• AcrylicPrismaticSheet
1www.diffusers.co.nz 0800 10 20 50
Prismatic & Speciality Sheets
D1 READED OPAL
Order Code
2.0mm Reeded Opal Cut to size* D1
Modern alternative to prismatic.Usages: Offices & Architectural applications
*Please note: exact cut size required. Non returnable
*Please note: exact cut size required. Non returnable
*Please note: exact cut size required. Non returnable
3.0mm
Most common thickness. Recommended maximum panel size 1195 x 595mm if unsupported.
LIGHTING ROLL
Code Thickness Width of Film UOM
Light 0.4mm 900mm Wide Sold in Rolls by kg
Styrene Lighting Film is specifically designed for the use in the manufacture of lampshades.
DUR-IFLEX
Code Thickness Width of Film UOM
Dura 0.5mm 1550 x 603mm Sheet
Dur-iFlex™ Polyester overlay panel. Easily cut, sheared or die stamped.
•Most popular pattern for troffer style recessed luminaire. Reduces fluorescent tube line. Reduces glare in the 45-90o degree zone
•Usages: General offices, Retail areas & Skylights
3.0
3.0
3.0
3.0
3.0
3.0
4.
* Please note: exact size required. Non returnable
2www.diffusers.co.nz 0800 10 20 50
LED PROFILESFormed and extruded LED Profiles. Custom profiles, manufactured on site.
Total glare control for computer screens. Silver Standard. Most popular sizes for metric troffer are 592 x 595mm & 1192 x 595mm. PL3 is an energy saving parabolic louver. It offers exceptional efficiency, maximum glare control & an attractive low brightness appearance. It’s todays most advanced parabolic.
with unique
Joint Detail
15 x 15
15
Shielding Angle 35º
PL3HIGH EFFICIENCY
section 20
13
Double Wedge Design
Lighting Products
PLASTER CEILING FRAME EGGCRATE PL3
3www.diffusers.co.nz 0800 10 20 50
Lenses & Covers
RECTANGULAR LOW BAY LENSES
CIRCULAR LENSES
718mm Dia Polycarbonate Lens PAN702
760mm Dia Polycarbonate Lens PAN760
Complete with metal brackets for hinged threaded bolts.
A1 Ring
To Fit Material Order Code
SL GEC 2’ Acrylic U11612
SL GEC 3’ Acrylic U16513
SL THORN 2’ Acrylic U11412
4www.diffusers.co.nz 0800 10 20 50
Width Length Fits the following Description Order Code
91 1252 REM Remtron Single 4' U11214
91 1559 REM Remtron Single 5' U11215
92 1580 HDF Thorn Single 5' U11015
95 668 RZIP Philips Single 2' U12512
95 1304 TCW375 Philips Single 4' U14014
95 1580 RZIP Philips Single 5' U15015
95 1605 TCW375 Philips Single 5' U16015
98 1266 TCW085 Philips Single 4' U18014
98 1567 TCW085 Philips Single 5' U19015
100 1261 PUV Thorn Single 4' U20014
100 1270 CM-1-50 Philips Single 4' U20414
100 1573 PUV Philips Single 5' U21015
108 1257 LUES Thorn Single 4' U91114
108 1560 LUES Thorn Single 5' U91115
113 1296 Pacific* Philips Single 4' U29014
113 1596 Pacific* Philips Single 5' U29015
140 1300 VA ** Thorn Twin 4' U22024
140 1605 VA ** Thorn Twin 5' U23025
147 1252 GEC GEC Single 4' U23214
147 1258 LUV Thorn Twin 4' U24024
150 1558 LUV Thorn Twin 5' U25025
153 1559 Remtron Remton Twin 5' U25225
135 1585 Aquaforce 11 Thorn Twin 5' U29125
157 1598 Pacific * Philips Twin 5' U29100
158 1315 Silverglow MK2 Neeco/GEC Twin 4' U25624
158 1618 Silverglow MK2 Neeco/GEC Twin 5' U26025
159 1268 TCW085 Philips Twin 4' U28024
159 1565 TCW086 Philips Twin 5' U29025
159 TCW086 Philips Twin 2' U27022
160 1275 LUES Thorn Twin 4' U91124
160 1560 LUES Thorn Twin 5' U91125
164 1261 PUV Philips Twin 4' U30024
164 1270 CM-2-100 Philips Twin 4' U30424
164 1304 TCW375 Philips Twin 4' U31024
164 1573 PUV Philips Twin 5' U32025
164 1580 CM-2-16 Philips Twin 5' U32425
164 1584 PWP Pierlite Twin 5' U80025
164 1590 PPU/HDF Thorn Twin 5' U33025
164 1603 TCW375/ Clipsal PWP Philips Twin 5' U34025
165 668 RZIP Philips Twin 2' U34522
165 1280 RZIP Philips Twin 4' U35024
165 1580 RZIP Philips Twin 5' U36025
166 1591 FND Thorn Twin 5' U36225
168 1620 SILVERGLOW MK1 Neeco Twin 5' U36425
175 1265 SDW Pierlite Twin 4' U36724
175 1565 SDW Pierlite Twin 5' U36825
178 1300 UNIVERSAL GEC Twin 4' U37024
178 1600 UNIVERSAL GEC Twin 5' U38025
180 1570 DEFENDER * REXEL Twin 5' U38325
181 1270 DEFENDER REXEL Twin 4' U38324
190 1290 HYGIENE FB *** Thorn Twin 4' U40124
190 1563 HYGIENE FB * Thorn Twin 5' U40025
189 1582 HYGIENE Thorn Twin 5' U39025
190 1590 HYGIENE 14 holes *** Thorn Twin 5' U40125
190 1590 HYGIENE 10 holes *** Thorn Twin 5' U40225
190 1590 HYGIENE 12 holes *** Thorn Twin 5' U40235
200 692 A4V Thorn Twin 2' U40822
200 1304 A4V Thorn Twin 4' U41024
200 1628 A4V Thorn Twin 5' U42025
* Foam ** Clips *** Optional Foam
Underverandah Clear Covers
U845U835
Material: Acrylic
Accessories
Code Desciption
U820 Stainless Steel Clip PPU/HDF. Original clip material was plastic.
U835 Stud for Hygiene
U837 Receptacle for Hygiene
U845 LUV Plastic Clip
FM515 Foam 10.8 m Roll
5www.diffusers.co.nz 0800 10 20 50
BLACK 16mm END CAPS PAL16E
PALS
PALS - Clear - 16mm - 4 foot PAL416TS
T5=16mm T8=26mm.
SUSPENSION KIT. A simple and effective method of suspending a luminaire at the height
that suits your client .
Code Description SUSP Kit contains 3m Cable, x1 Ceiling
Attachment and x1 Gripper.
End Caps.
GRIPPER CEILING ATTACHMENT
6www.diffusers.co.nz 0800 10 20 50
Batten Products
Usages: General offices & schools
Usages: General offices & schools
Usages: Computer rooms.
8www.diffusers.co.nz 0800 10 20 50
HIPS - HIGH IMPACT POLYSTYRENE HIPS (High Impact Polystyrene) is a copolymer, formed when polybutadiene is added to polystyrene. Characteristics: Applications: Good impact resistance Printing: Signs, ID Cards and POS applications. Excellent machinability/forming capabilities
Packaging: (food and pharmaceutical)
Easy to print/paint and glue. Machined prototypes
Low cost Low-Strength structural components
Good dimensional stability Stationary
Model making
Stock SheetThickness Colour Sheet Size Code Additional Info0.75mm Black 760 x 1380mm 75bh High Gloss 0.75mm Black 760 x 1380mm 75bs Semi Gloss 0.75mm White 760 x 1380mm 75wh High Gloss 0.75mm White 760 x 1380mm 75ws Semi Gloss 1.0 mm Black 760 x 1380mm 1bh High Gloss 1.0 mm Black 760 x 1380mm 1bs Semi Gloss 1.0 mm White 760 x 1380mm 1wh High Gloss 1.0 mm White 760 x 1380mm 1ws Semi Gloss 1.5 mm Black 760 x 1380mm 1.5bh High Gloss 1.5 mm Black 760 x 1380mm 1.5bs Semi Gloss 1.5 mm White 760 x 1380mm 1.5wh High Gloss 1.5 mm White 760 x 1380mm 1.5ws Semi Gloss 2.0 mm Black 760 x 1380mm 2bh High Gloss 2.0 mm Black 760 x 1380mm 2bs Semi Gloss 2.0 mm White 760 x 1380mm 2wh High Gloss 2.0 mm White 760 x 1380mm 2ws Semi Gloss 3.0 mm Black 760 x 1380mm 3bh High Gloss 3.0 mm Black 760 x 1380mm 3bs Semi Gloss 3.0 mm White 760 x 1380mm 3wh High Gloss 3.0 mm White 760 x 1380mm 3ws Semi Gloss
Custom Manufacturing: Colour: Colour matching available. Surface Finish: High Gloss & Semi Gloss. Protective Masking Available. Embossing Patterns: Haircell, Leather grain & Levant. Additives: Flame Retardant Specific Capabilities: Gloss Width of sheet Embossing Pattern 0.3mm to 1.5mm Semi & High
Gloss Up to 900mm wide None
1.5mm to 6.0mm Semi & High Gloss
Up to 1400mm wide Leather grain
1.5mm to 6.0mm Semi Gloss
Up to 1400mm wide Haircell and Levant
HIPS
Further Processing: Cutting/Machining/Forming/Bending.
9www.diffusers.co.nz 0800 10 20 50
PP - POLYPROPYLENE Characteristics: Applications: Excellent chemical resistance Interior Wall Linings – kitchens, processing
plants, coolstores, caravans, motorhomes, horse floats.
Excellent impact resistance
Laboratory construction High tensile strength
Tank liners Low moisture absorption
Non-toxic
High stability to temperature
High surface lustre
Stock Sheet Thickness Colour Sheet Size Code 3.0mm Black 1220 x 2440 PP3B 3.0mm White 1220 x 2440 PP3W 4.5mm Black 1220 x 2440 PP45B 4.5mm White 1220 x 2440 PP45W
Custom Manufacturing: Colour: Colour matching available. Embossing Patterns: Haircell, Smooth & Levant. Additives: Flame Retardant Specific Capabilities: Width of sheet Embossing Pattern 0.3mm to 1.5mm Up to 900mm wide Smooth 1.5mm to 6.0mm Up to 1200mm wide Haircell, Smooth and Levant
POLYETHYLENE
LDPE – LOW DENSITY POLYETHYLENE Characteristics: Applications: Excellent chemical resistance. Low heat environments – chemical and
electrical components. Lightweight Trays and Containers Good toughness Washers Non-toxic
HDPE - HIGH DENSITY POLYETHYLENE Characteristics: Applications: Excellent impact resistance Freight containers High tensile strength Material handling Low moisture absorption Laboratory construction Non-toxic Wall linings Cutting Boards Custom Manufacturing for LDPE and HDPE: Colour: Colour matching available Embossing Patterns: Haircell, Smooth and Levant Additives: Flame Retardant Specific Capabilities: Width of sheet Embossing Pattern 0.3mm to 1.5mm Up to 900mm wide Smooth 1.5mm to 6.0mm Up to 1400mm wide Haircell, Smooth and Levant
Further Processing: Cutting/Machining/Forming/Bending.
Further Processing: Cutting/Machining/Forming/Bending.
Further Processing: Cutting/Machining/Forming/Bending.
PP & POLYETHYLENE
10www.diffusers.co.nz 0800 10 20 50
ApplicationsSporting GoodsElectronic Applications
AES - ACRYLONITILE ETHYLENE STYRENE
CharacteristicsGood Weather ResistanceHigh Impact ResistanceHigh Heat Resistance
Specific Capabilities: Width of sheet Embossing Pattern 0.3mm to 1.5mm Up to 900mm wide Smooth 1.5mm to 6.0mm Up to 1400mm wide Haircell, Smooth and Levant
ABS - ACRYLONITRILE BUTADIENE STYRENE
ABS is an extremely versatile thermoplastic which is easily thermoformed and injection moulded.
Characteristics: Applications: Relatively low cost Machined prototypes Excellent impact resistance Electrical and electronic assemblies Good machinability Protective headgear Good Strength and Stiffness Material Handling equipment Excellent vacuforming ability Packaging Stock Sheet Thickness Colour Sheet Size Code Embossing Pattern 1.5mm Black 2440 x 1300 ABS15BHC Haircell 3.0mm Black 2440 x 1220 ABS30BHC Haircell
Custom Sheet Manufacturing: Colour: Custom colour matching available. Embossing Patterns: Haircell, Leathergrain, Levant and Smooth Additives: Flame Retardant and UV inhibitors. Specific Capabilities:
Width of sheet Embossing Pattern 0.3mm to 1.5mm Up to 900mm wide Smooth 1.5mm to 6.0mm Up to 1400mm wide Smooth and Leathergrain 1.5mm to 6.0mm 1200 -1400mm wide Haircell, Smooth and Levant Further Processing: Cutting/Machining/Forming/Bending.
Further Processing: Cutting/Machining/Forming/Bending.
Custom Manufacturing for LDPE & HDPE:Colour: Colour matching availableEmbossing Patterns: Haircell, Smooth & LevantAdditives: Flame Retardent
ABS & AES
Industrial Plastic Sheeting.Manufactured on one of our 4 extrusion lines, NPD produces sheet and roll stock for the Display, Transportation, Sporting Goods and Packaging Sectors.
Plastic Supplied:• High Impact Polystyrene• Polypropylene• ABS• LDPE and HDPE• AES
Many thickness and sizes are available ex stock. NPD will also supply custom coloured sheet with a range of additives including UV Stabilisers and Flame Retardants.
Lighting ComponentsSupplying the Replacement and New Lighting Markets, NPD supplies products that are both manufactured on site and imported from trusted suppliers.
Products available:• Prismatic Sheet• Ceiling Panels • LED Profiles• PALS• HID Lenses and Covers• Underverandah Covers• Batten Diffusers• Lampshade Backing• Suspension Kits
NPD from its base in Takanini, Auckland, supplies a range of Industrial Plastic Sheeting and Lighting Components.
Tel: 64 9 269 0880 Fax: 0800 10 80 50116B Takanini School Road Takanini, 2105