IndustrIal Powertool CATALOGUE 2013 KEYANG - · PDF filecontents Introduction to Keyang:...

IndustrIal Powertool CATALOGUE 2013

KEY

AN

G

technology drIven QUALITY ASSURED

contents

Introduction to Keyang: Keyang manufactures in south Korea and is the number 1 in Industrial Power tools and has remained market leader for the last 10 years, in Korea, ahead of all the major brands known in the world wide market place.

since the birth of Keyang over 30 years ago, our values have remained true. to manufacture high quality Industrial Power tool without compromise. now we are going global with the support of strategic partners around the world. this vision will see Keyang where it belongs, at the top, competing with all the major brands, developing new and exciting products to maximize the customer’s experience. our company strap line is “technology driven QualIty assured” and this statement is at the forefront of our business model.

welcome to Keyang, where the future begins now.

CORDLESS range 5-16

HAmmER range 17-20

AnGLE GRInDER range 21-25

SAw range 26

wELDER range 27

CORDLESS BRUSH CUTTER tool 28 GAS nAILER tool 29 nOTES 30

COmpAnY ProfIle 31

www.kEYAnG.COm TECHnOLOGY DRIvEn QualIty assured

KEY

AN

GKEYA

NG IntroductIon

32

cordless RAnGECORDLESS DRILL DRIvER range

DD

-1202l-

2Industrial CordlessDrill Driver 10.8v

dd-1202l-2/dd-1203l-2

Soft griphandle

18 steps driver +1 drill

Charge indicator and LED light

Description: The NEW DD-1202L-2 and DD-1203L-2 are the next generation of Keyang’s compact and lightweight Cordless Drill Drivers. The new models have further improvements in handling for the user. It has a keyless chuck with lock function with 18 driver settings with 1 drill setting. The built in LED light helps with work in confined dark spaces and it also has a state of the art indicator which identifies how much charge in the machine is left.

Technical Specification:Parameter Unit DD-1202l-2 DD-1203l-2Weight kg 1.0 0.89No load speed (rpm) min-1 0-350/0-1,300 0-350/0-1,300Chuck adaptor mm 1–10 1–10Run-out mm 0.5 ▼ 0.5 ▼Max torque (drill position) N.m 25 25 Torque control – 18+ Drill 18+ DrillSound level dB 75 ▼ 75 ▼Vibration m/s2 0.7 ▼ 0.7 ▼Charging time min. 30 30Charging current A 2.6 2.6Cell maker – Samsung SamsungCell capacity Ah 1.3/1.5 1.3/1.5

Battery Options:Available in the following battery combinations:1x1.3Ah, 2x1.3Ah, 1x1.5Ah, 2x1.5Ah

Soft griphandle

Charge indicator and LED light

5

DD

-1203l-

2


KEYA

NG

4

Technical Specification:Parameter Unit DD-1441l-2SWeight kg 1.7No load speed (rpm) min-1 0-350/0-1,800 Chuck adaptor mm 1–13Run-out mm 0.5 ▼Max torque (drill position) N.m 65 Sound level dB 75 ▼Vibration m/s2 0.7 ▼Charging time min. 60Charging current A 3.0Cell maker – SamsungCell capacity Ah 1.3/1.5/2.6/3.0

Battery Options:Available in the following battery combinations:1x1.3Ah, 2x1.3Ah, 1x1.5Ah, 2x1.5Ah,1x2.6Ah, 2x2.6Ah, 1x3.0Ah, 2x3.0Ah

The Keyang DID-1440L has 1/4” hexagon drive diecast aluminium gearbox with high torque 145 Newton metres and new powerful motor. Has a cushion grip handle and work light with battery charge indicator to ensure awareness for recharge. Suitable for the toughest screw driving applications.

Technical Specification:Parameter Unit DID-1440lWeight kg 1.9No load speed (rpm) min-1 0-2400Tool holder mm 1/4”(hex) 6.35Run-out mm 0.5 ▼Max torque (drill position) N.m 145 Sound level dB 75 ▼Vibration m/s2 0.7 ▼Charging time min. 60Charging current A 3.0Cell maker – SamsungCell capacity Ah 1.3/1.5/2.6/3.0


Technical Specification:Parameter Unit DDH-1441l-2SWeight kg 1.9No load speed (rpm) min-1 0-350/0-1,700Chuck adaptor mm 1–13Run-out mm 0.5 ▼Max torque (drill position) N.m 65 Sound level dB 75 ▼Vibration m/s2 0.7 ▼Charging time min. 60Charging current A 3.0Cell maker – SamsungCell capacity Ah 1.3/1.5/2.6/3.0


Diecastingaluminium gearbox

LED work light

Cushion grip

2 speedoption

25 steps driver + 1 drill+ 1 hammer

Battery chargeindicator

The Keyang DDH-1441L-2S is a powerfull yet light and compact Cordless Hammer Drill. Two speed spindle lock gear box with keyless chuck. The comfortable soft grip handle fits ergonomically around the users hand. It has 25 driver settings and 1 hammer setting for optimal use.

25 stepsdriver +1 drill

Built inLED light

Li-ion batteryfor long life

DID

-1202l

The Keyang 14.4V Cordless Drill Driver comes with long life Lithium-ion batteries which makes the weight 40% lighter than equivalent tools with NiCad batteries. High maximum torque with a 13mm keyless chuck. Variable speeds with 25 step driver and 1 drill setting with a soft grip handle.

Industrial Cordless Drill Driver 14.4v dd-1441l-2s

DD

-1441l-2

S

6

DD

H-1

441l-

2SIndustrial Cordless

Hammer Drill 14.4v ddh-1441l-2s

Industrial Cordless Impact Driver 14.4v dId-1440l

DID

-1440l

7

CORDLESS|haMMer|grInder|other


Technical Specification:Parameter Unit DID-1203lWeight kg 1.0No load speed (rpm) min-1 0-2,700Chuck adaptor mm 1/4”(hex)Run-out mm 0.5 ▼Max torque (drill position) N.m 100 Sound level dB 72 ▼Vibration m/s2 0.5 ▼Charging time min. 30Charging current A 2.6Cell maker – SamsungCell capacity Ah 1.3 Battery Options: Available in the following battery combinations:

1x1.3Ah, 2x1.3Ah

The Keyang DID-1202L 1/4” hexagon drive diecast aluminium gearbox has a high torque 100 N.m powerful motor. It includes an LED worklight to assist in confined spaces and a battery with a 30 minute charge time. It boasts a state of the art indicator to show the remaining charge in the machine.

Industrial Cordless Impact Driver 10.8v dId-1202l

Diecast Aluminium Gearbox

LED Worklight Cushion Grip

Technical Specification:Parameter Unit DIW-1440lWeight kg 2.0No load speed (rpm) min-1 0-2200Tool holder mm 1/2”(hex) 12.7Run-out mm 0.5 ▼Max torque (drill position) N.m 230 Sound level dB 75 ▼Vibration m/s2 0.7 ▼Charging time min. 60Charging current A 3.0Cell maker – SamsungCell capacity Ah 1.3/1.5/2.6/3.0


Technical Specification:Parameter Unit DD-1801l–2SWeight kg 1.9No load speed (rpm) min-1 0-400/1,900Chuck adaptor mm 1–13Run-out mm 0.5 ▼Max torque (drill position) N.m 70 Sound level dB 75 ▼Vibration m/s2 0.7 ▼Charging time min. 60Charging current A 3.0Cell maker – SamsungCell capacity Ah 2.6/3.0


Technical Specification:Parameter Unit DID-1800lWeight kg 2.1No load speed (rpm) min-1 0-2300Tool holder mm 1/4”(hex) 6.35Run-out mm 0.5 ▼Max torque (drill position) N.m 150 Sound level dB 75 ▼Vibration m/s2 0.7 ▼Charging time min. 60Charging current A 3.0Cell maker – SamsungCell capacity Ah 2.6/3.0


The Keyang DID-1800L 1/4” hexagon drive diecast aluminium gearbox has a high torque 150 N.m powerful motor. It includes a work light, cushion grip and a battery charge indicator to ensure awareness of recharging. Suitable for the toughest of screwdriving applications.

8

DIW

–1440l

1/2” socket

Powerful motor

Charge indicator

The Keyang DIW-1440L is a compact 1/2” sq. drive impact wrench with a diecast aluminium gearbox. The powerful motor delivers 230 N.m torque. It includes a work light, cushion grip and a battery charge indicator. A heavy duty design to handle the most difficult wrench applications.

Industrial Cordless Impact Driver wrench 14.4v dIw–1440l

Technical Specification:Parameter Unit DDH-1801l–2SWeight kg 2.0No load speed (rpm) min-1 0-400/0-1,900Chuck adaptor mm 1–13Run-out mm 0.5 ▼Max torque (drill position) N.m 70 Sound level dB 75 ▼Vibration m/s2 0.7 ▼Charging time min. 60Charging current A 3.0Cell maker – SamsungCell capacity Ah 2.6/3.0


The Keyang DDH-1801L-2S is compact and lightweight with a powerful motor for efficient working use. The Li-ion battery provides a full charge every time thanks to no memory effect. The cushion grip handle aids increased comfort in the grip zone. Built in LED light helps with work in confined spaces.

2 speed option

25 steps driver LED light

The Keyang DD-1801L-2S has a built in spindle lock gearbox and 2 speed for accuracy whilst drilling. The 25 driving setting and 1 drill + 1 impact drill setting makes this tool truly versatile. State of charge indicator tells the user how much charge is left.

dd-1801l-2s-nt

Industrial Cordless Drill Driver 18v dd-1801l-2s

DD

-1801l-2

S

Li-ion Battery for long life

Keyless chuck

LED light

DD

H-1

801l-

2SIndustrial Cordless

Hammer Drill 18v ddh-1801l-2s

Industrial Cordless Impact Drill Driver 18v dId-1800l

DID

-1800l


9

dId-1800l-nt

ddh-1801l-2s-nt

Diecasting aluminium gearbox

Worklight


10

DIW

–1440l

Industrial Cordless Impact Driver wrench 18v dIw–1800l

Industrial Cordless Jigsaw 18v Js-1800l

JS-1

800l


CORDLESS SAw tool

Technical Specification:Parameter Unit CS-1800lWeight kg 3.20No load speed (rpm) min-1 4000Battery type W Li-ionBattery capacity Ah 3.0Charging time min. 30 Cutting depth 90o 57 Cutting depth 50o 36 Cutting depth 45o 40 Max. blade Ø mm 165

Battery Options:Available in the following battery combibations: 2x3.0Ah Tool Kit comes complete with:• Plastic case• Guide bar and wrench• Charger• Battery• Tip saw guide

Description: The Keyang CS–1800L industrial Cordless Circular Saw is lightweight and compact, yet very powerful in it’s class. The use of the Li-ion batteries help keep the weight ratio perfect, along with ergonomic and soft grip handle, all of which keeps the user’s experience high. Fitted to the machine is a dust nozzle and blower to help extract dust whilst working. There is also a battery charge-control indicator which informs the user when the battery is running low and ready for a fast charge in the Rappid charger unit.

Ergonomic & soft grip

Switch lock off lever

Auxiliary handle

Switch: Break type

Brush cap

Dust blow

Aluminium base

Tip saw blade:165*1.0*20*16

Battery chargeindication

Safety cover

code: cs-1800l -nt

T shape auto ejectsaw

The new Keyang JS-1800L Industrial cordless Jigsaw has many features to provide the user with constant and consistant performance. Its 4 step orbital cutting settings enables the machine to achieve high levels of working efficiency. This robust machine coupled with the ergonomic design and soft grip handle, is as valued addition to our 18V cordless product family.Technical Specification:Parameter Unit JS-1800lWeight (including battery) kg 3.8 No Load speed (bpm) min -1 0-2,600 Battery Type W Li-ion Battery Capacity Ah 3.0 Charging time min. 30 Cutting Depth mm Wood - 85 Steel - 6 Sound Level dB 90 ▼Vibration m/s2 1.2 ▼Battery Options:Available in the following battery combibations: 2 x 3.0Ah

3 step orbitalstraight cut forbetter workingefficiency

code: Js–1800l-nt

Technical Specification:Parameter Unit DIW-1800lWeight kg 2.2No load speed (rpm) min-1 0-2100Tool holder mm 1/2”(hex) 12.7Run-out mm 0.5 ▼Max torque (drill position) N.m 240 Sound level dB 75 ▼Vibration m/s2 0.7 ▼Charging time min. 60Charging current A 3.0Cell maker – SamsungCell capacity Ah 2.6/3.0


1/2” socket

The Keyang DIW-1800L is a compact 1/2” sq. drive impact wrench with a diecast aluminium gearbox. It has a powerful motor with high torque 240 N.m. It includes a work light, cushion grip and a battery charge indicator. A heavy duty design to handle the most difficult wrench applications.

Powerful motor

dIw-1800l-nt

CS-1

800l

Cordless CircularSaw 18v

cs-1800l

11www.kEYAnG.COm TECHnOLOGY DRIvEn QualIty assured

Technical Specification:Parameter Unit RS-1800lWeight kg 3.3 No load speed (bpm) min-1 0-2,500Battery type W Li-ionBattery capacity Ah 3.0Charging time min. 30Sound level dB 85 ▼Vibration m/s2 3.5 ▼Functions – 3 steps depth Functions – quick change blade Functions – saw hook

Battery Options:Available in the following battery combinations:2x3.0Ah

12

DG

-1800l

Industrial Cordless mini-Grinder 18v dg-1800l

Industrial Cordless worklight 14.4/18v lf-1418z

lf-1418z

RS-1

800l

Industrial Cordless Reciprocating Saw 18v rs-1800l

Industrial Cordless Screwdriver18v asd-1800l

ASD

-1800l


13

The Keyang Industrial Cordless Reciprocating Saw is ergonomically designed to maximise user comfort. It has a clever orbital feature which allows for consistent working efficiency on different materials. With easy saw changing and 3 step saw depth adjustment, flexibility of this machine is optimised.

Quick change saw. Easily attached and detatched

Orbital lever for better cutting efficiency

code: rs-1800l -nt

Technical Specification:Parameter Unit DG-1800lWeight (including battery) kg 2.2No load speed (rpm) min-1 10,000 Battery type W Li-ionBattery capacity Ah 3.0Charging time min. 30 Rated voltage DC 18V Max. DIA mm 100/115 Spindle size M M10/M14 Wheel guard – 15 screw (EN)

Battery Options:Available in the following battery combibations: 2 x 3.0Ah

Technical Specification:Parameter Unit lf-1418zWeight (including battery) kg 1.2Nominal voltage DC V 14.4/18LED light LED 9 BulbsFunctions – 3 beam setting Functions – Head pivots 90O

Functions – Handle pivots 130O

Battery Options:Can be supplied with following battery options or as a naked tool. 2 x 3.0Ah

The Keyang DG-1800L Industrial Cordless Mini-Grinder comes with a powerful 4-pole motor with built in anti-restart function and electronic current limiter. Both have warning indicators enhancing the safety credentials of this power tool.

KEYANG Battery 18V Li-ion 3.0Ah2 Action switch knob

Powerful 4-pole motor

Battery charge control indicator

Wheel guard: Apply EN60745

The Keyang LF-1418Z Industrial Cordless worklight can be used in conjunction with the standard 14.4V or 18V Li-ion batteries. The 9 LED lights gives it a powerfull brightness with low battery consumption.

9 LED high brightness lights

Angle adjustableupto 90 degrees

3 steps of angle adjustableupto 120 degrees

code: dg-1800l -nt

code: lf-118z-nt


Technical Specification:Parameter Unit ASD-1800lWeight kg 1.82 No Load Speed rpm 0-5000 Length of screw mm 20-57 Chuck Type Hex Socket 1/4” Battery Capacity Ah 2.0/4.0

Battery Options:Available in the following battery combinations2 x 2.0Ah, 2 x 4.0Ah

The NEW Keyang Industrial 18V Screwdriver can be used for single and collated screws via a detachable magazine. It is lightweight for ease of use during repetitive action. The adjustable depth gauge on the maga ccurately measure the penetration into the base material.

Adjustable Depth Gauge

Overload Protection

Quick Charger

KEY

AN

G

coMBInatIon kITS

14

CORDLESS HAmmER range

DH

-3600l

Industrial CordlessHammer Drill 36v

dh-3600l

15

Technical Specification:Parameter Unit DH-3600lWeight kg 4.7No load speed (rpm) min-1 0–1100No load impact (rpm) min-1 0–4790Impact force J 0–3.0Rated voltage V DC36Impact force Joules 0–3.0Charging time min. 30 Tri–axial vibration value H/drilling 9.5 Tri–axial vibration value Chiselling 7.5 Tri–axial vibration value Drilling 2.5 Max. drilling capacity concrete Ø28 Max. drilling capacity wood Ø30 Max. drilling capacity steel Ø13 Tool holder SDS–Plus

Description: The Keyang DH-3600L 36V Industrial Hammer Drill has optimum performance and excellent durability. It has many features you would expect to see from a top class model.

Tool Kit comescomplete with:• Plastic case• Charger• Li-ion Battery• Auxiliary handle• Depth gauge• Tube of grease

360o auxiliaryside handle

One touch sliding chuck

Operation mode selector lever(3 mode operating)

Soft griphandle

Full metalgearbox (inside)

VCS (Vibrationcontrol system)

Safety clutch (inside)

Forward/ reverseoperation

Variable switch with 2 finger trigger

Charging indication & overheating detection/indication

Rubber base Li-ion batteryPowerful DC motor

LED light indication

Adjusting and fixing of the angle (16 different positions)Quick change drill chuck adapter (13mm keyless chuck)

Battery Options:Available in the following battery combinations:2x2.6Ah, 2x3.0Ah


what wIll Be In YOUR BAG?

HAmmER rangeRH

D-2

62

Industrial SDS plus Rotary Hammer Drill

rhd-262/rhd-263

17

Technical Specification:Parameter Unit RHD-262 RHD-263Weight kg 2.50 2.50No load speed (rpm) min-1 1100 1100No load speed (bpm) min-1 5200 5200Power input W 800 800Impact force Joules 3.0 3.0 SDS + fixing mm 26 26 Nominal load speed (rpm) min-1 900 900 Nominal load speed (bpm) min-1 4410 4410 Tool holder system – SDS Plus SDS Plus

Ergonomic Design:The compact design, rubber handle and variable speed control enables true comfort in use.

Description: The Keyang 2kg Rotary Hammer Drill gives 800W of power. It also has a one touch sliding chuck for easy bit installation and removal. The drill bit capacity is 26mm and has 2 modes on RHD–262 and 3 modes on RHD–263 for hammer, drill and chisel. A true industrial drill which is both robust and lightweight for easy user capacity.

SDS Plus fixing

Variable speedswitch

Protective clutch

16

RH

D-2

63

cordless|HAmmER|grInder|other


Industrial SDS plus Rotary Hammer Drill

Phd-282B/Phd-283B

Technical Specification:Parameter Unit PHD-282B PHD-263Weight kg 2.90 2.90No load speed (rpm) min-1 1250 1250No load speed (bpm) min-1 4000 4000Power input W 800 800Impact force Joules 3.2 3.2 Max Drilling Diameter Wood 30mm 30mm Steel 13mm 13mm Concrete 28mm 28mm Tool holder system – SDS Plus SDS Plus

Ergonomic Design:The compact design, rubber handle and variable speed control enables true comfort in use.

Description: The NEW Keyang 2kg Rotary Hammer Drill has 3.2 joules of impact energy, with 28mm drill bit capacity. It also comes with Brush Shift technology for optimum performance whilst in forward and reverse function. There is a 2 mode, PHD-282B version and a 3 mode version, PHD-283B which enables Hammering, Drilling and Chiselling.

SDS Plus fixing

Variable speedswitch

Forward and Reverse Switch

PH

D-2

82B

PH

D-2

83B

Technical Specification:Parameter Unit KH-5000MWeight kg 5.0Tri-axial vibration value m/s 11.5No load speed (bpm) min-1 3500Power input W 1050Impact force Joules 7.5 Tool holder system mm SDS max.

Technical Specification:Parameter Unit PHD-40MWeight kg 5.9No load speed (rpm) min-1 235-500/minNo load speed (bpm) min-1 1350-2870/minPower input W 1100Impact force Joules 7.5 Max. drilling capacity C/drill bit 40mm Max. drilling capacity Core bit 105mm Tri-axial vibration value m/s 9.2 chiselling Tri-axial vibration value m/s 10.5 h/drilling Tool holder system – SDS Max.

Anti-vibration Data:Vibration control system working around all areas of the tool.

18

KH

-5000M

Industrial 5kg SDS max. Demolition Hammer Kh-5000M

Industrial 5kg SDS max. Combi Hammer Phd-40M

PH

D-4

0M

19

12 chisellingpositions

This powerful and lightweight 5kg Hammer has excellent durability built into a slim design. The variable lock system rotates and locks the chisel into 12 positions to optimise working angles. Soft, non-slip, elastomer grip handle and jacket for improved comfort and control. Lock on switch reduces fatigue whilst chiselling.

Vibrationcontrolsystem

Soft grip handle

Adusting & fixing ofchisel angle

Operationmode selector

The Keyang PHD-40M omits with low noise and vibration achieved by the dampening mechanism. Electronics speed control minimises speed loss during work and the preset variable speed dial with 6 speeds help match the bit speed. Self start and restart function for safety.



Technical Specification:Parameter Unit PHD-30AWeight kg 3.5No load speed (rpm) min-1 0~1,200 No load speed (bpm) min-1 0~5,554Power input W 800Impact force J 3.2 Max. drilling range Concrete Ø28mm Wood Ø30mm Steel Ø13mm Tri-axial vibration value m/s 12.0 h/drilling Tri-axial vibration value m/s 8.4 chiselling Tri-axial vibration value m/s 2.5 drilling Tool holder system – SDS plus

DM

v-1

3K

Industrial ImpactDrill dMv-13K

Industrial 3kg SDS plus Hammer Drill Phd-30a

PH

D-3

0A

Keyless Chuck

The keyang Industrial Impact Drill gives 650W of power. It has a soft grip for user comfort along with keyless chuck. The 3 mode function, Impact, Drill and Drive enables you to drill into Metal, Wood and Concrete. Also comes with LED light.Concrete. Also comes with LED light.Metal – 10mm|Wood – 25mm|Masonry – 13mm

Packing Details:Comes in a compact fabric branded bag 330x295x100mm.

Technical Specification:Parameter Unit DMV-13KWeight kg 1.65No load speed (rpm) min-1 0~2800 No load speed (bpm) min-1 0~44,800Power input W 650Voltage V 230 Frequency Hz 50 Class – Double Insulation Chuck – Keyless

Anti-vibration Data:Low noise and low vibration achieved by Keyang damping mechanism.

Side handlegrip

Soft grip handle

Keyang’s 3kg SDS Plus Hammer Drill comes with VCS anti vibration technology through its low noise damping mechanism. The full metal gearbox deliv-ers maximum performance and long machine life. One touch sliding chuck for easy bit installation and removal, along with the variable lock system, which rotates and locks the chisel into 16 different posi-tions, make this tool the perfect partner for varied operations.

Safetyclutch(inside)

VCS (vibration control system)

Soft Grip Handle

The Keyang PHD-40MV omits with low noise and vibration achieved by our AVT/TMD dampening mechanism. Electronics speed control minimises speed loss during work and the preset variable speed dial with 6 speeds help match the bit speed. Soft start and restart function for safety. 40mm capacity SDS Max.

Technical Specification:Parameter Unit PHD-40MvWeight kg 6.15No load speed (rpm) min-1 235-500/minNo load speed (bpm) min-1 1350-2870/minPower input W 1100Impact force Joules 7.5 Max. drilling capacity C/drill bit 40mm Max. drilling capacity Core bit 105mm Tri-axial vibration value m/s 7.0 chiselling Tri-axial vibration value m/s 8.5 h/drilling Tool holder system – SDS Max.

Anti-vibration Data:Vibration control system working around all areas of the tool.

Industrial 15kg Demolition Hammer Kh-6500

PH

D-3

0A

PH

D-4

0M

v

Industrial 5kg SDS max.Combi HammerPhd-40Mv

Hexagonaltool holder

External brush removal

Technical Specification:Parameter Unit KH-6500Weight kg 15.0No load speed (bpm) min-1 1450Power input W 1300Impact force Joules 40 Tool holder system mm hex. shank Tri-axial vibration value m/s 15

The Keyang KH-6500 15kg Hammer has optimised drilling for more effecient transmission of power. The 360 degree auxiliary handle provides a wide range of movement along with operator comfort. One touch hexagonal chuck for easy bit installation and removal.

360 degree auxiliary handle

SDS max.system

Operation mode selector

AVT/TMDdampeningmechanism

20



KEY

AN

G

grInder RAnGE

21

Technical Specification:Parameter Unit DG-1400AWeight kg 1.8No load speed (rpm) min-1 11000 Spindle size mm M14Max. Diameter mm 125Power input W 1400Nominal voltage V 230 Frequency Hz 50 Sound pressure level dB 91 ▼

The Keyang DG-1400A 1400W is a constant electronic controlled Angle Grinder. It has restarting protection as well as overload protection. It also comes with an anti-vibration handle.

22

DG

-851/2

Industrial 850w 4.5” & 5” Angle Grinder dg-851/2

Industrial 1050w4.5” & 5” Angle Grinder dg-1101c/dg-1102c

DG

-1101C

/2C

DG

-1400A

Industrial 1400w 5” Angle Grinder dg-1400a (constant electronIc)

Industrial 1400w 5” Angle Grinder dg-1400v (varIaBle electronIc)

DG

-1400v

23

cordless|haMMer|GRInDER|other


Technical Specification:Parameter Unit DG-851/2Weight kg 1.6No load speed (rpm) min-1 11000 Spindle size mm M14Max. Diameter mm 115/125Power input W 850 Nominal voltage V 230 Frequency Hz 50 Sound pressure level dB 87 ▼

The Keyang DG-851/DG-852 Angle Grinders has double installation for extra safety as well as a side switch for working convenience. Spindle lock-up push button installation for an easier change of grinding wheels. Enhanced motor life span with the application of duct protection on motor.

1 click wheel guard assembly

Anti-vibration side handle

Restarting overload protection

Technical Specification:Parameter Unit DG-1400vWeight kg 1.8No load speed (rpm) min-1 2800 -11000 Spindle size mm M14Max. Diameter mm 125Power input W 1400Nominal voltage V 230 Frequency Hz 50 Sound pressure level dB 91 ▼

The Keyang DG-1400V 1400W is a variable electronic controlled Angle Grinder. It has restarting protection as well as overload protection. It also comes with an anti-vibration handle.

Technical Specification:Parameter Unit DG-1101C/2CWeight kg 1.6No load speed (rpm) min-1 12000 Spindle size mm M14Max. Diameter mm 115/125Power input W 1100Nominal voltage V 230 Frequency Hz 50 Sound pressure level dB 91 ▼

The Keyang DG-1101C/DG-1102C has ultra-motor power of 1100W with electronic controller application. Constant speed control and soft starter are features of this tool. Outstanding speed for stone cutting. The auto stop carbon brush application aids longer life on the commutator and motor.

Comfortablehousinggrip

2 actionswitch knob

Soft start constant speed

Comfortablehousinggrip

2 actionswitch knob

Soft start constant speed

1 click wheel guard assembly


Restarting overload protection

24

DG

-180fB

(SS)

Industrial 2000w 7” Angle Grinder dg-180fB (soft start)

Industrial 2000w 9”Angle Grinder dg-230fB (soft start)

DG

-230fB

(SS)D

G-9

24A

vT(

SS)

Industrial 2400w 9” Angle Grinder dg-924avt (soft start)

Industrial 2000w 7” polisher dP-7000v

DP-

7000v

25

cordless|haMMer|GRInDER|other


Technical Specification:Parameter Unit DG-924AvT (S/S)Weight kg 4.9No load speed (rpm) min-1 6500 Spindle size mm M14Max. Diameter mm 230Power input W 2400Nominal voltage V 230 Frequency Hz 50 Sound pressure level dB 89 ▼

The Keyang DG-924AVT (S/S) Angle Grinder has an anti-vibration side handle. The 180o rotatable rear handle is ideal for varied working angles. Its anti-vibration rubber grip rear handle and soft start are optional with all the latest design features for user comfort. ‘D’ handle is also optional.

Technical Specification:Parameter Unit DG-180fB (S/S)Weight kg 4.9No load speed (rpm) min-1 8400 Spindle size mm M14Max. Diameter mm 180Power input W 2000Nominal voltage V 230 Frequency Hz 50 Sound pressure level dB 89 ▼

Ergonomic design


Rotating handle

Non-slip soft grip

Max. pad size 180mm dia.

Anti-noise system design

Technical Specification:Parameter Unit DP-7000vWeight kg 3.2No load speed (rpm) min-1 800-2400 Spindle size mm M14Max. Diameter mm 180Power input W 1200Nominal voltage V 230 Frequency Hz 50 Sound pressure level dB 83 ▼

The Keyang DP-7000V polisher has anti-noise design system and non-slip soft grip for user comfort.

The Keyang DG-180FB (S/S) Angle Grinder has an anti-vibration side handle. The 180o rotatable rear handle is ideal for varied working angles. Its anti-vibration rubber grip rear handle and soft start are optional with all the latest design features for user comfort.

Ergonomic design


Technical Specification:Parameter Unit DG-230fB (S/S)Weight kg 4.3No load speed (rpm) min-1 6500 Spindle size mm M14Max. Diameter mm 230Power input W 2000 Nominal voltage V 230 Frequency Hz 50 Sound pressure level dB 89 ▼

The Keyang DG-230FB (S/S) Angle Grinder comes with an anti-vibration side handle and a rubber handle grip for increased operator comfort during use.

New motor design with soft start

1 click wheel guard assy.


26

HC

-14K

Industrial 14” Chop Saw hc-14K

Industrial 190mm Circular Saw cs-7s

CS-7

SK

NS-1

600A

welder Kns-1600a

welder KnBs-1800a

KN

S-1

800A

27

cordless|haMMer|grInder|OTHER


Technical Specification:Parameter Unit KNS-1600AWeight kg 7.4Rated input voltage V AC220V±10%Rated input power VA 3.9KVA±0.2Rated voltage V 26Rated current A 150A±5No load voltage V 69V±5Efficiency % 50

Technical Specification:Parameter Unit KNS-1800AWeight kg 7.8Rated input voltage V AC220V±10%Rated input power VA 4.6KVA±0.2Rated voltage V 27Rated current A 170A±5No load voltage V 69V±5Efficiency % 50

The Keyang range of welding machines are small and lightweight. They are powerful with quickstart and have semi-conductor application technology. It has a high duty cycle (60%) which provides an improved protection system against the heat. Our welders have a stable control power and output current. Keyang provide electric shock protection to all welders.

features:1. Stay rated output voltage Possible Ø4 Full welding 2 Ensure safety External high voltage protection 3 Stable output current NON-STOP 4 Powerfull start welding Hot start adopted 5 Safety control power Minimize failure rate 6 Easy to repair Control - PCB seperated to SMPS PCB

Slim motor Constant speed control

Diecast aluminium base

Technical Specification:Parameter Unit HC-14KWeight kg 16.3 Voltage V 230No load speed (rpm) min-1 3800 Rated power W 2300 Sound pressure level dB(A) 99.7 Sound power level dB(A) 113Capacity - steel round bar mm 58 Capacity - steel round pipe mm 110Capacity - steel square pipe mm 110x130

The Keyang HC-14K 14” Chop Saw has an ergonomic structure with a ‘D’ type handle and a body base for extra user safety. Safety wheel cover and reduced start up to the spark guide design make this chop saw highly efficient and user friendly.

The Keyang CS-7S is a lightweight high powered accurate Circular Saw. It has a powerful blower to clear dust in line with cut and soft rubberised handle grip for user comfort. The weight of the tool has been reduced by the slim motor used. It is also fitted with a constant speed controllor for continuous power.

Safety wheel cover

Technical Specification:Parameter Unit CS-7SWeight kg 3.0 Nominal voltage V 230Frequency Hz 50Input power W 1100No load speed (rpm) min-1 5500Max. dia. mm 185Max. cut dia. (90o) mm 65 Max. cut dia. (45o) mm 45 Sound level dB 83 ▼

Industrial Cordless 18v Brush Cutter KcB-180

CORDLESS Brush cutter

GAS nAILER tool

KG

T-3800

professional Gas Tool

Kgt-3800

29TECHnOLOGY DRIvEn QualIty assured

• Fixes to steel, concrete, wood, block work, brick and more.

• Fast! Has 2 shots per second! 20 shot magazine, repetition. Fixing at its best!

• Simple to use. Read the instructions, charge the batteries, load the fuel cells and nails and GO!

• Pins have a ballistic point as standard for optimal penetration in steel and concrete

• Quietness allowing the user to maximize its use within confined areas.

• Supplied with 2 batteries, saving re-charging time. Each battery allows for 3000 shots before the need for re-charging.

• Lightweight, only 4kg including battery and fuel cell. Ideal for overhead applications.

• Unique system helps minimize pin jamming and ensures limited down time.

• Truly universal, with various barrel options for varied applications.

• Patented technology.

European patent pending codes:09170181.309075514.1

Technical Specification: Tool Weight 3.6 kg Tool Length 400 mm Tool Height 350 mm Track Wall Clearance 45 mm Energy (Est.) 90 J Fuel Cell Life 1,000 shots Temperature Range -10°C to 49°C Engine 260 cc Pin Head Diameter Ø 6.3 mm Pin Shank Diameter Ø 2.6-3.0 mm Pin Length 13 – 38 mm Magazine Capacity 20/40 pins Battery Voltage 6 V Battery Capacity 1.5 Ah Battery Charge time Max. 150 min. Battery Life 4,000 shots

features:

• For drywall contractor • Fixing light gauge

channel onto concrete • Fixing plastic accessories

to concrete • Quick shooting • Fuel saving • Long track available

(40 pins) • Changeable magazine

nose piece for snapping metal washer

Accessories:

• Battery • AC/DC Switch Adaptor • Charger

Technical Specification:Parameter Unit KCB-180Weight kg 3.20Battery type Li-ion V 18 Ah 6.6 Motor V DC18 Max. output W 230 rpm 8000 No load current Ah 3.5 Charger V DC10.8~18/2.6A

feature:• Working time: 60 mins• Charging time: 140 mins

Description:The Keyang KCB–180 18V industrial Cordless Brush Cutter, adopts Li-ion battery technology which helps make the machine light in weight and guarantees long life. It is environmentally friendly as there are no emitions, noise or vibration. It is a truly versatile tool with it’s adjustable pole length along with the loop handle which can be moved to different angles, helping to get to those difficult areas.

KGT–3800PROFESSIONAL GAS TOOL

28


www.kEYAnG.COm

KC

B-1

80

coMPany pROFILEnotes

Korean Factory

Keyang is the leader in the Korean electric tools industry, and specialises in manufacturing and selling D.C. motors for cars and engines, based on electric tools for the past 25 years.

Presently, we are in the digital era led by the internet, information communication, and life engineering, so individual life pattern as well as competitive environment among companies are changing very rapidly.

To respond to this change, Keyang has been strengthening its competitiveness by promoting digital management and e-business.

Besides this, we will continue our innovation activities for customer satisfaction, and by expanding the application of PDM SYSTEM focused on the development sector. We will establish customer-oriented CRM, by which customer needs can be accomplished and handled rapidly and accurately. Furthermore, Keyang will be leading quality management activities based on proper corresponding to PL Law, technology standardisation and quality priority principles.

The new vision of Keyang in the 21st century is to be a “world-class specialty company that provides customers with happiness.”

In the future, we will be the world-class specialty company that provides customers with happiness not only domestically but internationally.

We will provide products and service that help create the value (safety and convenience) desired by our customers, and also we will seek continuous growth and development by responding to the expectations of customers, by creating the best-quality product and developing new-concept products.

To accomplish our vision, under the slogan of “Selection and Concentration” we have set strategic direction to “People, Process, Product.” By “People”, we mean nurturing core man power, and by “Process”, developing business process in the level of 6 Sigma, and by “Product”, supplying world-class products. Especially, we will also carry out what all our employees have decided together on customer declaration and quality principles.

Once again, we appreciate our customers for using our Keyang products, and promise to be one of the world-class Manufacturers of electric tools, D.C. motors for cars, and engines.

KEY

AN

G

31TECHnOLOGY DRIvEn QualIty assured30


www.kEYAnG.COm

KEYA

NG

KEY

AN

G

ww

w.k

eyang.c

om

kEYAnG Electric Machinery UK Ltd Abbey House, Wellington Way, Brooklands Business Park, Weybridge, Surrey, KT10 0TT Tel: +44 (0) 1932 268411 Fax: +44 (0) 1932 268500

kEYAnG European Regional Office, PO Box 52074, Limassol 4060, Cyprus Tel: +357 25 342496 Fax: +357 25 732543

kEYAnG Middle East and Africa Regional Office, PO Box 70-150, Beirut, Lebanon Tel: +961 3 343435

kEYAnG Polska Sp. z.o.o Al. Krakowska 55, Sekocin Nowy 05-090 Raszyn, Poland Tel: +48 (22) 188 1424 Fax: +48 (22) 701 9301

kEYAnG HQ Korea, KEYANG Electric Machinery Co., Ltd. 823-2, Wonsi-dong, Danwon-gu, Ansan-si, Gyeonggi-do, South Korea Tel: +82 31 490 3013 Fax: +82 31 490 3019

kEYAnG China Keyang Electric Machinery(Suzhou) Co.,Ltd 66th South DongWu RD, Wuzhong District, Suzhou, China Tel: +86 512 6561 8058 Fax: +86 512 6561 0862

Date post:	09-Feb-2018
Category:	Documents
Upload:	trankhuong
View:	223 times
Download:	1 times

IndustrIal Powertool CATALOGUE 2013 KEYANG - · PDF filecontents Introduction to Keyang:...

Documents