Industrial Standby batteriesA wide offer of reliable, long-life solutions

ww

w.n

orw

att.

esno

rwat

t@no

rwat

t.es

Always ready when you need them Stationary batteries are used in refineries,power plants, onshore & offshore oil & gasindustries, substations, airports & buildinginfrastructure – locations where it isabsolutely critical to have batteries thatwill work when they should. Saft’sIndustrial Standby batteries provide justthat sort of extremely reliable backuppower, starting power and cyclingapplications for a variety of industrialapplications.

Saft stationary batteries, solutions you can count on

Minimum maintenance –or none at allOur broad range of products varies from traditional cells that require only minimum regular maintenance to our newest generation of batteriesthat are maintenance-free(1), with no needto add water.

A long life even in difficultconditionsSaft stationary batteries have a long life of more than 20 years under ambienttemperatures. Even in harsh environmentsand extremely hot or cold climates, Saft Ni-Cd stationary batteries still offer an outstanding service life as comparedconventional or traditional batteries.

Saft Industrial Standby batteries – A wide offer of reliable, long-life solutions2

By providing a large choice of technologies and cellconfigurations as well as a complete range of low, medium and high rate characteristics, our wide offer means you havethe stationary battery that is perfectly suited to your application. Saft Industrial Standby batteries offer you the peace of mind of knowing that they will work when you need them to work, for more than 20 years, in challenging conditions, with minimum or no maintenance(1).

Consider the TotalCost of Ownershipwhen you chooseOnly the Total Cost ofOwnership (TCO) representsthe true value of owning abattery. That's why Saftstationary batteries aredesigned to provide the idealcombination of highperformance, maximumreliability, long life andefficient operation.

Beyond just the one-timepurchase cost, considermaintenance needs, serviceintervals and—perhaps mostimportantly—life expectancywhen you choose stationarybatteries.

Your installation will lastmore than five years.Your batteries should, too.(1) The term maintenance free means that no addition

of water is necessary during the life time of the productwhen operating under Saft’s recommended conditions.

ww

w.n

orw

att.

esno

rwat

t@no

rwat

t.es

Stationary batteriesfrom a world leader

Saft has unequalled experience and expertise in designing, developingand manufacturing robust and reliablebatteries. Because we supervise the entire end-to-end value chain of our batteries, we can be sure of their safety and their quality.

Saft Industrial Standby batteries – A wide offer of reliable, long-life solutions 3

Our large offer means you can find a Saft Ni-Cd stationary battery that is right for your needs.

Maintenan

ce

Power Energy

Short discharge time Medium discharge time

Discharge Time

Long discharge time

100h3h30min4min1s

Regular

Low

Free(1)

Uptimax L

Sunica.plus

SBMSBH

SPH

Uptimax M

SBLE

Tel.X

SPX

New

ww

w.n

orw

att.

esno

rwat

t@no

rwat

t.es

The right solution, no matter what your application

Saft Industrial Standby batteries – A wide offer of reliable, long-life solutions

Reliable and robust batteriesfor backup powerPower is absolutely vital to UninterruptiblePower Supply (UPS) systems, switching and transmission functions,emergency and security systems,industrial fire monitors and alarms, data centers, process controlinstallations, signaling systems and more.

If the primary source of power forapplications such as these is suddenlyunavailable, a backup system provides a temporary source of power untilprimary power re-engages or whilesystems operators perform a propershutdown. But backup power is only as good as the stationary battery that enables it.

Uptimax New Generation batteries for a maintenance-free(1) solutionUptimax New Generation is our maintenance-free(1), highly reliable Saft Nife® Ni-Cd pocket plate technology power back-up solution for high temperature conditions. It is particularly well suited for use in the oil and gas, utility and electricity industries. With efficient gas recombination, its recommended operating instructions do not call for topping-up with water. It offers maximum performance for a minimal Total Cost of Ownership (TCO).

BACKUP

Tel.X maintenance-free(1) batteries for railroadsignaling and offshore applications Ideally suited for trackside communication applications, the Tel.X Ni-Cd battery reaches an outstanding 100 Wh/L and 30% lighterweight than VRLA battery. Tel.X is a compact high-energy, long-lifeand maintenance-free(1) alternative to VRLA batteries in floatingapplications. It is easy to install and its long service life provides anoptimum Total Cost of Ownership (TCO).

SBLE, SBM and SBH for a long reliable lifeOur SBLE, SBM and SBH block batteries are the optimum solution for all discharge characteristics. Built with reliable Ni-Cd pocket plate technology from Saft Nife®, they function over a wide range of temperatures, resist electrical abuse, shock and vibrations, need only basic maintenance and offer a low Total Cost of Ownership (TCO) over a life cycle that can last 20 years or more.

4

(1) The term maintenance free means that no addition of water is necessary during the life time of the productwhen operating under Saft’s recommended conditions.

ww

w.n

orw

att.

esno

rwat

t@no

rwat

t.es

Adapted to your sector’s unique needs

Saft Industrial Standby batteries – A wide offer of reliable, long-life solutions 5

Buildings & Plants

Hospitals, plants, data centers,telecom installations,large public buildings, missioncritical facilities, banks

Oil & Gas

Offshore platforms, onshoreproduction sites, pipelines,upstream and downstreamfacilities, remote locations

Off-grid photovoltaics

PV, off-grid installations, pipelines,hybrid systems

Transportinfrastructures

Rail, road, marine buoys, aviation beacons, tunnels,signaling, generators

Utilities

Electricity generation, gas turbine plants, T&Dsubstations, desalination plants

Instant emergency power to startStandby power plant must be instantly available incase of emergencies. This is particularlyimportant when the application is mission critical,such as for process plant where a loss ofproduction can have important economic impactor for a hospital where lives can be at risk.

STARTING

SPX: the world's most powerful Ni-Cd batteryfor engine crankingSPX cutting-edge Ni-Cd battery range is ideally suited forengine starting applications requiring high reliability, longcranking time, high or low temperature operation and longcalendar life. Certified to IEC 60623 ‘X’ extra-high power, it delivers the mostamperes per Ah capacity, ensuring that any generator willstart in all conditions. Moreover, with a reduced footprint, itenables smaller installations and lower environmental impact.

Ready for challenging off-grid photovoltaic conditions Faced with the complex charge/discharge cyclingpatterns imposed by the unpredictability of theweather, the high cycling capabilities of Saftbattery systems provide reliable power for solarand other stand-alone sites, even in remotelocations and harsh environments.

CYCLING

Sunica.plus for renewable off-gridphotovoltaic applicationsSaft Sunica.plus uses Saft Nife® Ni-Cd low maintenance pocket plate technology to achieve 10 000 cycles at 15% depth of discharge in temperatures from - 50°C (- 58°F) to + 70°C (+ 158°F). Saft operates at any state of chargewithout corrosion or sulphatation.

NEW

ww

w.n

orw

att.

esno

rwat

t@no

rwat

t.es

Ni-Cd for durable batterieswith a long life

Saft nickel cadmium (Ni-Cd) batteries offerexceptional performance in a robust steelstructure. Unlike lead batteries, whichdeteriorate rapidly especially at hightemperatures or difficult operatingconditions, our Ni-Cd batteries are knownfor their physical strength, and long life,qualities that are very important inapplications where the consequences of abattery’s “sudden death” are unacceptable.

The technology that meets your needs

Saft Industrial Standby batteries – A wide offer of reliable, long-life solutions6

Li-ion for specific high energy and high powerrequirementsFor applications requiring lighter, morecompact battery systems such as UPS,Saft can now deliver extremely long life,reliable, maintenance-free lithium-ion (Li-ion) battery configurations to meetyour new needs and new applications.Today, this kind of technology operatessubsea Christmas trees and UPS. Saft Li-ion batteries deliver high energy density,high power (both in charge and discharge)and excellent cycling capabilities.

Intensium Flex Li-ion systemsfor power and space-tightUPS requirementsDesigned to meet high power and energyrequirements, Intensium Flex is basedon 24 V or 48 V compact modules,available in high power, medium poweror high energy. Intensium Flex systemsare delivered in a 19-inch rack mountformat, up to 1000 V configurations,integrating Saft’s Battery ManagementModule, safety and communicationfunctions.

Effect of temperature on lifetime

Perc

enta

ge o

f +25

°C (+

77°F

) life

time

Temperature

°C

100

90

80

70

60

50

40

30

20

10

055504540353025

°F131122113104958677

Nickel-cadmium

Lead acid

ww

w.n

orw

att.

esno

rwat

t@no

rwat

t.es

End-to-end service and supportSaft’s stationary battery experts are skilledand experienced at resolving the individualneeds of our customers around the world.We provide battery sizing advice,comprehensive after-sales installationsupport, a range of maintenance servicesand a series of training courses.

Quality: ISO 9001 / ISO 14001 / Saft World Class program

Environment: Fully recyclable

RoHS: Although batteries and accumulators are not within the scope of the RoHS directive, Saft has taken voluntary measuresto make sure that the substances forbidden by RoHS are not present in the battery, with the exception of the electro-chemical core.

Reach: The Saft Group has adopted internal procedures to ensure conformity with the European Regulation Reach.

Install and maintain your Saft batteriesThanks to our training courses, yourtechnicians and engineers can properlyinstall and maintain Saft batteriesthemselves. Courses cover basic andadvanced skills, with a special focus oninstallation and maintenance guidelinesand standards to ensure maximumperformance and reliability from yourpower systems. Saft’s training courses include both theoryand hands-on practice. To better support its customers forcommissioning, diagnostic, maintenanceand after-sales activities, Saft continues to enhance its network of approved service stations in the Middle East, Asia and North America. Visit www.saftbatteries.com for the contactdetails of the Saft service station near you.

Size it yourself

Our Battery Sizing and ConfigurationSystem, known as BaSiCs, helps customersto quickly find the right Saft Ni-cd batteryfor their backup, starting, or photovoltaicapplications. BaSiCs offers a layout todefine one or several stands as well as thebattery layout itself. To obtain your personallogin and password, contact your usual Saftrepresentative and then download BaSicson our website.

So much more than just batteries

Saft Industrial Standby batteries – A wide offer of reliable, long-life solutions 7

Saft Industrial Standby batteries are in full conformity with a range of globally recognized quality, safety and environmental standards.

ww

w.n

orw

att.

esno

rwat

t@no

rwat

t.es

As part of its environmentalcommitment, Saft gives priority to recycled raw materials over virgin raw materials, reduces its plants’ airand water releases year after year,minimizes water usage, reduces fossilenergy consumption and associated CO2

emissions, and ensures that itscustomers have recycling solutions for their spent batteries.

Regarding industrial nickel-basedbatteries, Saft has had partnerships for many years with collectioncompanies in most EU countries. This collection network receives anddispatches our customers’ batteries at the end of their lives to fully approvedrecycling facilities, in compliance withthe laws governing trans boundarywaste shipments.

This collection network meets the requirements of the EU batteriesdirective. A list of our collection points is available on our web site.In other countries, Saft assists users of its batteries in finding environmentallysound recycling solutions. Please contact your sales representativefor further information.

Saft is committed to the highest standards of environmental stewardship

Document N° 21948-0416-2Edition: April 2016Data in this document is subject to change without noticeand becomes contractual only after written confirmation.Photo credits: Saft, Fotolia.Cap Interactif 656

© Saft – Société par Actions Simplifiée au capital de 31 944 000 €RCS Bobigny B 383 703 873

ww

w.n

orw

att.

esno

rwat

t@no

rwat

t.es