Date post: | 24-Mar-2016 |
Category: |
Documents |
Upload: | reklamehuset-soenderborg-aps |
View: | 225 times |
Download: | 1 times |
Industrial TapesAdhesive Tapes for Industry
Engineered to Perform Better™
Bro
chur
e 92
0317
, ©
201
2, O
RA
FOL
Eur
op
e G
mb
H.
OR
ALI
TE
® a
nd R
eflex
ite® a
re r
egis
tere
d tr
adem
arks
of O
RA
FOL
Eur
op
e G
mb
H. -
482
01-1
01 (1
2/20
12)
Located just outside of Berlin in the heart of Europe, the ORAFOL Europe GmbH headquarters is the hub of the organisation’s culture of leadership and excellence.
“
Engineered to Perform Better™ - www.orafol.com2
ORAFOL’s headquarters
Engineered to Perform Better™ - www.orafol.com 3
IndexIndustrial TapesFind the right solution for your needs
ORAFOL Europe GmbH offers a truly comprehensive range of technical adhesive tapes
including transfer tapes, double sided tapes, foam tapes and splicing tapes. Our technical focus
is on supply of high performance adhesive systems from solvent cross linked acrylics, synthetic
rubbers, and silicone adhesives to meet customer demands for repeatable excellence in
bonding performance.
The ORAFOL families of Adhesive Tapes are suitable for high performance applications in most
industries with our main focus being automotive, electronics, paper, and point of sales industries.
Page List of contents
4 / 5 ORAFILM® Transfer Tapes
6 /13 ORABOND® Acrylic double-sided adhesive tapes with film or paper carrier
14 / 15 ORAFIX® Splicing tapes
16 / 17 ORABOND® Synthetic rubber double-sided adhesive tape
18 / 21 ORAMOUNT® Double-sided adhesive tapes with foam carrier
22 / 23 Prime applications
24 Customer reference and fingerlift products
Engineered to Perform Better™ - www.orafol.com4
Product Adhesive Carrier Thickness(WithoutLiner - micron)
ReleaseLiner
Adhesive180° peel(N/25 mm)
Shear strength(1 kg)
Loop track(N/25 mm)
Temperatureresistance(°C)
Application-specific characteristics(4 = highly recommended, 0 = not recommended)
Prime applications Standard width Master (mm)
(S) also as slit rolls
20 min 24h 23° C 70° C UV and age resist-ance
Short term tem-perature resist-ance
Water resist-ance
Solvent and plas-ticiser resist-ance
Adhe-sion to low-surface energy
ORAFILM®
1373A1 without 100 90 g paper,
brown16 18 > 1000 h > 72 h 17 -40 to +170 4 4 4 4 2 High performance lamination: for rough surfaces, brake shim bonding. 1000
1250
ORAFILM®
1373WA1 without 100 140 g PE paper,
white16 18 > 1000 h > 72 h 17 -40 to +170 4 4 4 4 2 High performance lamination, lamination of e.g. brake shim bonding. 1250
ORAFILM®
1374A1 without 50 90 g paper,
brown13 16 > 1000 h > 72 h 16 -40 to +170 4 4 4 4 1 Electronics, high performance lamination; for even and slightly porous
surfaces.1000
ORAFILM®
1375
1375S(Sheets)
A7 without 60 100 g PE paper,brown
18 20 > 1000 h > 72 h 11 -40 to +170 4 4 4 4 1 For the production of metal, polycarbonate and other plastic facias, name-plates and decals; used for lamination of membrane switch assemblies and other electronic component mounting in mobile telephones and for other applications that require an extremely high shear strength and temperature resistance; UL 969 listed.
3056101220S*Sheets
ORAFILM®
1377
1377S(Sheets)
A7 without 120 100 g PE paper,brown
22 24 > 1000 h > 72 h 13 -40 to +170 4 4 4 4 2 For the production of metal, polycarbonate and other plastic facias, signs, nameplates and decals; used for lamination of membrane switch assemblies and other electronic component mounting in notebooks, mobile telephones and for other applications that require an extremely high shear strength and temperature resistance; conforms with UL 969.
3056101220S*Sheets
ORAFILM®
1325AM12 without 60 100 g PE paper,
brown22 25 > 500 h > 10 h 21 -40 to +150 4 3 3 3 4 For low energy surface lamination: for foams and materials that require an
extremely high shear, adhesive strength and temperature resistance, excellent resistance to UV radiation, extreme temperatures, chemicals, solvents and humidity.
3056101220S
ORAFILM®
1327
1327S(Sheets)
AM12 without 90 100 g PE paper,brown
24 27 > 500 h > 10 h 24 -40 to +150 4 3 3 3 4 For low energy surface lamination: for foams and materials that require an extremely high shear, adhesive strength and temperature resistance, for rough and slightly structured or stamped surfaces, particularly high initial adhesion for low energy surfaces.
3056101220S
ORAFILM®
1368AM2glass fibre filled
without 50 90 g paper,brown;also with WA liner as 1368WA
22 27 > 400 h > 6 h 20 -40 to +150 4 3 3 3 3 PVC & polyolefin foam lamination, leaded windows, metal and plastic name plates and facia panels, production of special labels and decals in electronic industries; for low energy surfaces; WA version available.
1000
ORAFILM®
1370AM2glass fibre filled
without 90 90 g paper,brown
25 28 > 400 h > 6 h 22 -40 to +150 4 3 3 3 4 Foam lamination, metal and plastic name plates, security glazing tapes, decals in electronic industries; for rough surfaces.
1000
ORABOND®
1160A1 without 50 PET film,
transparent, 23 micronPET film, blue, 100 micron
17 20 > 600 h > 72 h 13 -40 to +170 4 4 4 4 1 Electronics, membrane switches, circuit separation, for defined spacing of circuit for touch key boards.
1270
ORABOND®
1162A1 without 100 PET film,
transparent, 23 micronPET film, blue, 100 micron
20 25 > 600 h > 72 h 18 -40 to +170 4 4 4 4 1 Electronics, membrane switches, circuit separation, for defined spacing of circuit for touch key boards.
1270
Pu
re s
olv
en
t a
cry
licP
ure
ac
rylic
Mo
difi
ed
so
lve
nt
ac
rylic
ORAFILM®
Transfer tapes
Engineered to Perform Better™ - www.orafol.com 5
Product Adhesive Carrier Thickness(WithoutLiner - micron)
ReleaseLiner
Adhesive180° peel(N/25 mm)
Shear strength(1 kg)
Loop track(N/25 mm)
Temperatureresistance(°C)
Application-specific characteristics(4 = highly recommended, 0 = not recommended)
Prime applications Standard width Master (mm)
(S) also as slit rolls
20 min 24h 23° C 70° C UV and age resist-ance
Short term tem-perature resist-ance
Water resist-ance
Solvent and plas-ticiser resist-ance
Adhe-sion to low-surface energy
ORAFILM®
1373A1 without 100 90 g paper,
brown16 18 > 1000 h > 72 h 17 -40 to +170 4 4 4 4 2 High performance lamination: for rough surfaces, brake shim bonding. 1000
1250
ORAFILM®
1373WA1 without 100 140 g PE paper,
white16 18 > 1000 h > 72 h 17 -40 to +170 4 4 4 4 2 High performance lamination, lamination of e.g. brake shim bonding. 1250
ORAFILM®
1374A1 without 50 90 g paper,
brown13 16 > 1000 h > 72 h 16 -40 to +170 4 4 4 4 1 Electronics, high performance lamination; for even and slightly porous
surfaces.1000
ORAFILM®
1375
1375S(Sheets)
A7 without 60 100 g PE paper,brown
18 20 > 1000 h > 72 h 11 -40 to +170 4 4 4 4 1 For the production of metal, polycarbonate and other plastic facias, name-plates and decals; used for lamination of membrane switch assemblies and other electronic component mounting in mobile telephones and for other applications that require an extremely high shear strength and temperature resistance; UL 969 listed.
3056101220S*Sheets
ORAFILM®
1377
1377S(Sheets)
A7 without 120 100 g PE paper,brown
22 24 > 1000 h > 72 h 13 -40 to +170 4 4 4 4 2 For the production of metal, polycarbonate and other plastic facias, signs, nameplates and decals; used for lamination of membrane switch assemblies and other electronic component mounting in notebooks, mobile telephones and for other applications that require an extremely high shear strength and temperature resistance; conforms with UL 969.
3056101220S*Sheets
ORAFILM®
1325AM12 without 60 100 g PE paper,
brown22 25 > 500 h > 10 h 21 -40 to +150 4 3 3 3 4 For low energy surface lamination: for foams and materials that require an
extremely high shear, adhesive strength and temperature resistance, excellent resistance to UV radiation, extreme temperatures, chemicals, solvents and humidity.
3056101220S
ORAFILM®
1327
1327S(Sheets)
AM12 without 90 100 g PE paper,brown
24 27 > 500 h > 10 h 24 -40 to +150 4 3 3 3 4 For low energy surface lamination: for foams and materials that require an extremely high shear, adhesive strength and temperature resistance, for rough and slightly structured or stamped surfaces, particularly high initial adhesion for low energy surfaces.
3056101220S
ORAFILM®
1368AM2glass fibre filled
without 50 90 g paper,brown;also with WA liner as 1368WA
22 27 > 400 h > 6 h 20 -40 to +150 4 3 3 3 3 PVC & polyolefin foam lamination, leaded windows, metal and plastic name plates and facia panels, production of special labels and decals in electronic industries; for low energy surfaces; WA version available.
1000
ORAFILM®
1370AM2glass fibre filled
without 90 90 g paper,brown
25 28 > 400 h > 6 h 22 -40 to +150 4 3 3 3 4 Foam lamination, metal and plastic name plates, security glazing tapes, decals in electronic industries; for rough surfaces.
1000
ORABOND®
1160A1 without 50 PET film,
transparent, 23 micronPET film, blue, 100 micron
17 20 > 600 h > 72 h 13 -40 to +170 4 4 4 4 1 Electronics, membrane switches, circuit separation, for defined spacing of circuit for touch key boards.
1270
ORABOND®
1162A1 without 100 PET film,
transparent, 23 micronPET film, blue, 100 micron
20 25 > 600 h > 72 h 18 -40 to +170 4 4 4 4 1 Electronics, membrane switches, circuit separation, for defined spacing of circuit for touch key boards.
1270
* 914 x 610 mm
, 610 x 457 mm
, 457 x 305 mm
Industrial marketsS
tan
da
rdS
tan
da
rd
Engineered to Perform Better™ - www.orafol.com6
Mo
difi
ed
so
lve
nt
ac
rylic
Product Adhesive Carrier Thickness(WithoutLiner - micron)
Liner Adhesive180° peel(N/25 mm)
Shear strength(1 kg)
Loop track(N/25 mm)
Temperatureresistance(°C)
Application-specific characteristics(4 = highly recommended, 0 = not recommended)
Prime applications Standard width Master (mm)
(S) also as slit rolls
20 min 24h 23° C 70° C UV and age resist-ance
Short term tem-perature resist-ance
Water resist-ance
Solvent and plas-ticiser resist-ance
Adhe-sion to low-surface energy
ORABOND®
1194AM10 57 micron PP 215 90 g paper,
brown25 28 > 600 h > 10 h 28 -40 to +120 4 3 4 3 3 Cable trunking, furniture trim, general plastic component bonding and
mounting, lamination of automotive mirrors, high temperature splicing. Available in fingerlift spools.
1372S
ORABOND®
1194K3AM10 57 micron PP 215 100 micron,
pp film,yellow
25 28 > 600 h > 10 h 28 -40 to +120 4 3 4 3 3 Cable trunking, furniture trim, general plastic component bonding and mounting, lamination of automotive mirrors, high temperature splicing. Available in fingerlift spools.
1372S
ORABOND®
1195AM10 12 micron PET 130 90 g paper,
brown23 25 > 600 h > 10 h 28 -40 to +160 4 4 4 3 3 Electronic applications, stamped parts, lamination of signs, covers, scales,
metal and plastic films; recommended for lightly structured surfaces.1000126014101550S
ORABOND®
1198AM10 12 micron PET 70 90 g paper,
brown21 22 > 600 h > 10 h 26 -40 to +160 4 4 4 3 3 Electronics, mobile telephone gaskets; recommended for even surfaces. 1000
126014101550S
ORABOND®
119708AM10 12 micron PET,
black210 90 g paper,
brown30 32 > 600 h > 10 h 28 -40 to +160 4 4 4 3 3 Electronics, mobile telephone gaskets, high temperature splicing. 1000
S
ORABOND®
119508AM10 12 micron PET,
black130 90 g paper,
brown23 25 > 600 h > 10 h 28 -40 to +160 4 4 4 3 3 Electronics, mobile telephone gaskets. 1000
S
ORABOND®
119808AM10 12 micron PET,
black70 90 g paper,
brown21 22 > 400 h > 10 h 28 -40 to +160 4 4 4 3 3 Electronics, mobile telephone gaskets, lamination of signs, covers, scales,
metal and plastic films.1000S
ORABOND®
Double-sided adhesive tapes
NEW
NEW
Engineered to Perform Better™ - www.orafol.com 7
Sta
nd
ard
Product Adhesive Carrier Thickness(WithoutLiner - micron)
Liner Adhesive180° peel(N/25 mm)
Shear strength(1 kg)
Loop track(N/25 mm)
Temperatureresistance(°C)
Application-specific characteristics(4 = highly recommended, 0 = not recommended)
Prime applications Standard width Master (mm)
(S) also as slit rolls
20 min 24h 23° C 70° C UV and age resist-ance
Short term tem-perature resist-ance
Water resist-ance
Solvent and plas-ticiser resist-ance
Adhe-sion to low-surface energy
ORABOND®
1194AM10 57 micron PP 215 90 g paper,
brown25 28 > 600 h > 10 h 28 -40 to +120 4 3 4 3 3 Cable trunking, furniture trim, general plastic component bonding and
mounting, lamination of automotive mirrors, high temperature splicing. Available in fingerlift spools.
1372S
ORABOND®
1194K3AM10 57 micron PP 215 100 micron,
pp film,yellow
25 28 > 600 h > 10 h 28 -40 to +120 4 3 4 3 3 Cable trunking, furniture trim, general plastic component bonding and mounting, lamination of automotive mirrors, high temperature splicing. Available in fingerlift spools.
1372S
ORABOND®
1195AM10 12 micron PET 130 90 g paper,
brown23 25 > 600 h > 10 h 28 -40 to +160 4 4 4 3 3 Electronic applications, stamped parts, lamination of signs, covers, scales,
metal and plastic films; recommended for lightly structured surfaces.1000126014101550S
ORABOND®
1198AM10 12 micron PET 70 90 g paper,
brown21 22 > 600 h > 10 h 26 -40 to +160 4 4 4 3 3 Electronics, mobile telephone gaskets; recommended for even surfaces. 1000
126014101550S
ORABOND®
119708AM10 12 micron PET,
black210 90 g paper,
brown30 32 > 600 h > 10 h 28 -40 to +160 4 4 4 3 3 Electronics, mobile telephone gaskets, high temperature splicing. 1000
S
ORABOND®
119508AM10 12 micron PET,
black130 90 g paper,
brown23 25 > 600 h > 10 h 28 -40 to +160 4 4 4 3 3 Electronics, mobile telephone gaskets. 1000
S
ORABOND®
119808AM10 12 micron PET,
black70 90 g paper,
brown21 22 > 400 h > 10 h 28 -40 to +160 4 4 4 3 3 Electronics, mobile telephone gaskets, lamination of signs, covers, scales,
metal and plastic films.1000S
Electronic markets
Engineered to Perform Better™ - www.orafol.com8
Mo
difi
ed
so
lve
nt
ac
rylic
Product Adhesive Carrier Thickness(WithoutLiner - micron)
Liner Adhesive180° peel(N/25 mm)
Shear strength(1 kg)
Loop track(N/25 mm)
Temperatureresistance(°C)
Application-specific characteristics(4 = highly recommended, 0 = not recommended)
Prime applications Standard width Master (mm)
(S) also as slit rolls
20 min 24h 23° C 70° C UV and age resist-ance
Short term tem-perature resist-ance
Water resist-ance
Solvent and plas-ticiser resist-ance
Adhe-sion to low-surface energy
ORABOND®
1398AM2 12 micron PET 70 90 g paper,
brown22 24 > 400 h > 3 h 15 -40 to +160 4 4 4 3 3 Lamination of signs, covers, metal and plastic films, white goods component
fixing, electronic products; for even surfaces.1000126014101550S
ORABOND®
1395AM2 12 micron PET 130 90 g paper,
brown24 28 > 400 h > 6 h 38 -40 to +160 4 4 4 3 4 Sign boards, general fixing, sail making tapes, electronic component
mounting, special labels; thinner version of 1397.1000126014101550S
ORABOND®
1391PPAM2 12 micron PET 160 80 micron, PP film
salmon25 29 > 400 h > 6 h 28 -40 to +160 4 4 4 3 4 PVC extrusions, furniture trims, splicing for high temperature operations,
splicing of difficult materials, intermediate thickness version of 1397PP. Available in fingerlift spools.
1000S
ORABOND®
1397AM2 12 micron PET 210 90 g paper,
brown
Also availablewith TM liner
30 35 > 400 h > 6 h 33 -40 to +160 4 4 4 3 4 PVC extrusions, furniture trims, splicing for high temperature operations, splicing of difficult materials, lamination of automotive mirrors.Available in fingerlift spools.
1000126014101550S
ORABOND®
1397PPAM2 12 micron PET 210 80 micron, PP film
salmon30 35 > 400 h > 6 h 33 -40 to +160 4 4 4 3 4 PVC extrusions, furniture trims, splicing for high temperature operations,
splicing of difficult materials, production of sails for sailboards.Available in fingerlift spools.
100013721460S
ORABOND®
1392AM2 38 micron
hard PVC,white
260 90 g paper,brown
Also availablewith TM liner
36 38 > 400 h > 6 h 23 -40 to +70 4 2 4 3 4 Sign making, digital graphics mounting, extrusion applications, lamination of automotive mirrors and white goods components; for rough surfaces.Available in fingerlift spools.
100012601372S
ORABOND®
1393AM2 100 micron
soft PVC,white
270 90 g paper,brown
38 42 > 400 h > 6 h 45 -40 to +80 4 2 4 3 4 Furniture trims, cable trunking, lamination of automotive mirrors; for rough surfaces.
1000S
ORABOND®
1396AM2 Tissue 130 90 g paper,
brown24 28 > 400 h > 6 h 28 -40 to +140 4 3 2 3 4 Foam lamination, sign boards, general fixing; for smooth or lightly porous
surfaces, thinner version of ORABOND® 1399.1000126014101550S
ORABOND®
1301AM7 (red coloured modified solventacrylic)
Tissue 100 90 g paper,brown
17 17 - - 22 -40 to +160 4 4 2 4 3 For splicing of paper and boards where there is a requirement for a visible splice or automatic splice detection using optical devices.
1000
ORABOND®
1399AM2 Tissue 190 90 g paper,
brown
Also availablewith TM liner
29 35 > 400 h > 6 h 28 -40 to +140 4 3 2 3 4 High performance fixing, mounting of roller blinds, point of sale, foam lamination, splicing of difficult materials; for rough surfaces.
1000126014101550S
ORABOND®
Double-sided adhesive tapes
NEW
Engineered to Perform Better™ - www.orafol.com 9
Sta
nd
ard
Sta
nd
ard
Sta
nd
ard
Sta
nd
ard
Sta
nd
ard
Sta
nd
ard
Sta
nd
ard
Sta
nd
ard
Product Adhesive Carrier Thickness(WithoutLiner - micron)
Liner Adhesive180° peel(N/25 mm)
Shear strength(1 kg)
Loop track(N/25 mm)
Temperatureresistance(°C)
Application-specific characteristics(4 = highly recommended, 0 = not recommended)
Prime applications Standard width Master (mm)
(S) also as slit rolls
20 min 24h 23° C 70° C UV and age resist-ance
Short term tem-perature resist-ance
Water resist-ance
Solvent and plas-ticiser resist-ance
Adhe-sion to low-surface energy
ORABOND®
1398AM2 12 micron PET 70 90 g paper,
brown22 24 > 400 h > 3 h 15 -40 to +160 4 4 4 3 3 Lamination of signs, covers, metal and plastic films, white goods component
fixing, electronic products; for even surfaces.1000126014101550S
ORABOND®
1395AM2 12 micron PET 130 90 g paper,
brown24 28 > 400 h > 6 h 38 -40 to +160 4 4 4 3 4 Sign boards, general fixing, sail making tapes, electronic component
mounting, special labels; thinner version of 1397.1000126014101550S
ORABOND®
1391PPAM2 12 micron PET 160 80 micron, PP film
salmon25 29 > 400 h > 6 h 28 -40 to +160 4 4 4 3 4 PVC extrusions, furniture trims, splicing for high temperature operations,
splicing of difficult materials, intermediate thickness version of 1397PP. Available in fingerlift spools.
1000S
ORABOND®
1397AM2 12 micron PET 210 90 g paper,
brown
Also availablewith TM liner
30 35 > 400 h > 6 h 33 -40 to +160 4 4 4 3 4 PVC extrusions, furniture trims, splicing for high temperature operations, splicing of difficult materials, lamination of automotive mirrors.Available in fingerlift spools.
1000126014101550S
ORABOND®
1397PPAM2 12 micron PET 210 80 micron, PP film
salmon30 35 > 400 h > 6 h 33 -40 to +160 4 4 4 3 4 PVC extrusions, furniture trims, splicing for high temperature operations,
splicing of difficult materials, production of sails for sailboards.Available in fingerlift spools.
100013721460S
ORABOND®
1392AM2 38 micron
hard PVC,white
260 90 g paper,brown
Also availablewith TM liner
36 38 > 400 h > 6 h 23 -40 to +70 4 2 4 3 4 Sign making, digital graphics mounting, extrusion applications, lamination of automotive mirrors and white goods components; for rough surfaces.Available in fingerlift spools.
100012601372S
ORABOND®
1393AM2 100 micron
soft PVC,white
270 90 g paper,brown
38 42 > 400 h > 6 h 45 -40 to +80 4 2 4 3 4 Furniture trims, cable trunking, lamination of automotive mirrors; for rough surfaces.
1000S
ORABOND®
1396AM2 Tissue 130 90 g paper,
brown24 28 > 400 h > 6 h 28 -40 to +140 4 3 2 3 4 Foam lamination, sign boards, general fixing; for smooth or lightly porous
surfaces, thinner version of ORABOND® 1399.1000126014101550S
ORABOND®
1301AM7 (red coloured modified solventacrylic)
Tissue 100 90 g paper,brown
17 17 - - 22 -40 to +160 4 4 2 4 3 For splicing of paper and boards where there is a requirement for a visible splice or automatic splice detection using optical devices.
1000
ORABOND®
1399AM2 Tissue 190 90 g paper,
brown
Also availablewith TM liner
29 35 > 400 h > 6 h 28 -40 to +140 4 3 2 3 4 High performance fixing, mounting of roller blinds, point of sale, foam lamination, splicing of difficult materials; for rough surfaces.
1000126014101550S
Industrial markets
Engineered to Perform Better™ - www.orafol.com10
Mo
difi
ed
so
lve
nt
ac
rylic
Pu
re s
olv
en
t a
cry
licM
od
ifie
d s
olv
en
t a
cry
licM
od
ifie
d d
isp
ers
ion
ac
ryla
te
Product Adhesive Carrier Thickness(WithoutLiner - micron)
Liner Adhesive180° peel(N/25 mm)
Shear strength(1 kg)
Loop track(N/25 mm)
Temperatureresistance(°C)
Application-specific characteristics(4 = highly recommended, 0 = not recommended)
Prime applications Standard width Master (mm)
(S) also as slit rolls
20 min 24h 23° C 70° C UV and age resist-ance
Short term tem-perature resist-ance
Water resist-ance
Solvent and plas-ticiser resist-ance
Adhe-sion to low-surface energy
ORABOND®
1386AM2 PP tissue 130 90 g paper,
brown25 28 150 h 1 h 28 -40 to +120 4 2 4 3 4 Sail making for non-stitched and conventional stitched sails and spinnakers,
also used for boat covers and kite production.1000S
ORABOND®
1354LAM1 Tissue 110 90 g paper,
brown18 20 48 h 1 h 17 -40 to +120 4 3 3 3 3 For high performance foam lamination, lamination of paper or wood veneers
to wood and mdf boards.1000126014101550S
ORABOND®
1387A2 12 micron PET 110 90 g paper,
brown14 18 150 h 1 h 19 -40 to +140 4 2 4 2 4 Foam and textile lamination, sign making and general lamination. 1000
126014101550S
ORABOND®
1389A4 12 micron PET 70 90 g paper,
brown12 16 > 1000 h > 72 h 8 -40 to +170 4 4 4 4 1 Lamination of digital printed signs, window roller blind attachment;
recommended for thin materials with even surfaces.1000126014101550S
ORABOND®
1331AM1 / AM5 12 micron PET 100 90 g paper,
brown18 / 1.2 20 / 1.5 > 500 h /
> 48 h> 72 h /1 h
- -40 to +120 4 2 2 3 2 Recommended for use where a permanent bond to the primary substrate is required, with a “post-note” low tack bond to the other substrate (open side permanent bonding): for window protection pads and removable splicing; easy and residueless removal from covered side. Available in fingerlift spools.
1000S
ORABOND®
1333A1 / AM6 12 micron PET 80 90 g paper,
brown11 / 7 14 / 8 > 1000 h /
> 300 h> 72 h /> 72 h
- -40 to +120 4 1 4 4 1 Recommended for use where a permanent bond to the primary substrate is required, with a medium tack temporary bond to the other substrate (open side permanent bonding); residueless removal from covered side.Available in fingerlift spools.
1000126014101550S
ORABOND®
1334AM1 / AM6 12 micron PET 100 90 g paper,
brown18 / 7 20 / 8 > 300 h /
> 300 h> 72 h /> 72 h
- -40 to +120 4 2 2 3 2 Especially suitable as a self-adhesive medium for different materials. Ideal for situations where residueless removal is required.
1000S
ORABOND®
1354NAD4 Tissue 180 90 g paper,
brown22 25 72 h 20 min 22 -40 to +140 4 2 3 3 3 Foam lamination in refrigeration evaporator mounting; application in a broad
temperature range.1000126014101550S
ORABOND®
1344NAD4 Tissue 130 90 g paper,
brown18 22 72 h 5 min 18 -40 to +140 4 2 3 3 3 Foam, metal, polystyrene, paper, hard and soft PVC lamination in automo-
tive and refrigeration evaporator mounting.1000126014101550S
ORABOND®
Double-sided adhesive tapes
NEW
Engineered to Perform Better™ - www.orafol.com 11
Sta
nd
ard
Sta
nd
ard
Sta
nd
ard
Sta
nd
ard
Sta
nd
ard
Sta
nd
ard
Sta
nd
ard
Sta
nd
ard
Product Adhesive Carrier Thickness(WithoutLiner - micron)
Liner Adhesive180° peel(N/25 mm)
Shear strength(1 kg)
Loop track(N/25 mm)
Temperatureresistance(°C)
Application-specific characteristics(4 = highly recommended, 0 = not recommended)
Prime applications Standard width Master (mm)
(S) also as slit rolls
20 min 24h 23° C 70° C UV and age resist-ance
Short term tem-perature resist-ance
Water resist-ance
Solvent and plas-ticiser resist-ance
Adhe-sion to low-surface energy
ORABOND®
1386AM2 PP tissue 130 90 g paper,
brown25 28 150 h 1 h 28 -40 to +120 4 2 4 3 4 Sail making for non-stitched and conventional stitched sails and spinnakers,
also used for boat covers and kite production.1000S
ORABOND®
1354LAM1 Tissue 110 90 g paper,
brown18 20 48 h 1 h 17 -40 to +120 4 3 3 3 3 For high performance foam lamination, lamination of paper or wood veneers
to wood and mdf boards.1000126014101550S
ORABOND®
1387A2 12 micron PET 110 90 g paper,
brown14 18 150 h 1 h 19 -40 to +140 4 2 4 2 4 Foam and textile lamination, sign making and general lamination. 1000
126014101550S
ORABOND®
1389A4 12 micron PET 70 90 g paper,
brown12 16 > 1000 h > 72 h 8 -40 to +170 4 4 4 4 1 Lamination of digital printed signs, window roller blind attachment;
recommended for thin materials with even surfaces.1000126014101550S
ORABOND®
1331AM1 / AM5 12 micron PET 100 90 g paper,
brown18 / 1.2 20 / 1.5 > 500 h /
> 48 h> 72 h /1 h
- -40 to +120 4 2 2 3 2 Recommended for use where a permanent bond to the primary substrate is required, with a “post-note” low tack bond to the other substrate (open side permanent bonding): for window protection pads and removable splicing; easy and residueless removal from covered side. Available in fingerlift spools.
1000S
ORABOND®
1333A1 / AM6 12 micron PET 80 90 g paper,
brown11 / 7 14 / 8 > 1000 h /
> 300 h> 72 h /> 72 h
- -40 to +120 4 1 4 4 1 Recommended for use where a permanent bond to the primary substrate is required, with a medium tack temporary bond to the other substrate (open side permanent bonding); residueless removal from covered side.Available in fingerlift spools.
1000126014101550S
ORABOND®
1334AM1 / AM6 12 micron PET 100 90 g paper,
brown18 / 7 20 / 8 > 300 h /
> 300 h> 72 h /> 72 h
- -40 to +120 4 2 2 3 2 Especially suitable as a self-adhesive medium for different materials. Ideal for situations where residueless removal is required.
1000S
ORABOND®
1354NAD4 Tissue 180 90 g paper,
brown22 25 72 h 20 min 22 -40 to +140 4 2 3 3 3 Foam lamination in refrigeration evaporator mounting; application in a broad
temperature range.1000126014101550S
ORABOND®
1344NAD4 Tissue 130 90 g paper,
brown18 22 72 h 5 min 18 -40 to +140 4 2 3 3 3 Foam, metal, polystyrene, paper, hard and soft PVC lamination in automo-
tive and refrigeration evaporator mounting.1000126014101550S
Industrial markets
Engineered to Perform Better™ - www.orafol.com12
Mo
difi
ed
dis
pe
rsio
n a
cry
late
Product Adhesive Carrier Thickness(WithoutLiner - micron)
Liner Adhesive180° peel(N/25 mm)
Shear strength(1 kg)
Loop track(N/25 mm)
Temperatureresistance(°C)
Application-specific characteristics(4 = highly recommended, 0 = not recommended)
Prime applications Standard width Master(mm)
(S) also as slit rolls
20 min 24h 23° C 70° C UV and age resist-ance
Short term tem-perature resist-ance
Water resist-ance
Solvent and plas-ticiser resist-ance
Adhe-sion to low-surface energy
ORABOND®
1349GIAD16 Tissue 100 90 g paper,
brown21 24 > 5 h 15 min 15 -40 to +140 4 2 2 2 2 Extremely flexible APEO free* tape for lamination of cellular rubber and
EPDM; also for textiles and wood, small-pore and impregnated foams, cellular PE, soft PVC and other smooth or slightly rough surfaces.
1000
ORABOND®
1350GIAD16 Scrim 230 90 g paper,
brown27 30 > 7 h 15 min 27 -40 to +140 4 2 2 2 3 Extremely flexible APEO free* tape for lamination of cellular rubber and
EPDM; also for textiles and wood, open-pore and impregnated foams, cellular PE, soft PVC and other rough, open surfaces; suitable for applications where resistance to high temperature, ageing and plasticisers are needed.
1000
ORABOND®
1346AD3 Tissue 110 90 g paper,
brown18 21 48 h 20 min 15 -40 to +100 4 2 2 2 2 Good distributor grade used for multiple end applications, rubber, leather,
textile and foam lamination, splicing of paper, cardboard and film.1000126014101550S
ORABOND®
1348AD7 Tissue 100 90 g paper,
brown19 22 24 h 30 min 14 -40 to +120 4 2 2 2 2 APEO-free* economy foam lamination product: for lamination of cellular
rubber, small pore and impregnated foams, felt fabrics and other smooth and slightly rough surfaces; highly resistant against ageing and plasticisers.
1000126014101550S
ORABOND®
1349AD16 Tissue 160 90 g paper,
brown
Also availablewith TM liner
25 27 > 72 h 30 min 26 -40 to +140 4 2 2 2 3 APEO-free* version of our market leading famous ORABOND® 1359 product with the same exceptional performance in applications with EPDM and other foams, especially suitable for flexible materials like cellular rubber, PVC, slightly porous foams, felts, plastic cuttings and other rough surfaces; good temperature, ageing, EPDM and plasticiser resistance.
1000126014101550S
ORABOND®
1359AD8 Tissue 160 90 g paper,
brown
Also availablewith TM liner
25 27 > 72 h 30 min 26 -40 to +140 4 2 2 2 3 High performance distributor grade used for multiple end applications, rubber, foam, textile, wood and soft PVC lamination, especially for bonding of EPDM foams and EPDM rubbers; recommended for rough open surfaces; APEO-free* version available: 1349.
1000126014101550S
ORABOND®
1358AD7 Tissue 155 90 g paper,
brown22 25 72 h 75 min 17 -40 to +120 4 2 2 2 3 APEO free*, softer version of ORABOND® 1349 for lamination of cellular
rubber, open-pore and impregnated foams, felt-fabrics and other rough, open surfaces; highly resistant against ageing and plasticisers.
1000126014101550S
ORABOND®
1367AD9 Tissue 150 90 g paper,
brown24 28 48 h 15 min 15 -40 to +120 4 2 2 2 2 General purpose lamination on glass, metal, PVC and PE foam and for
cardboard, paper and film splicing.1000S
ORABOND®
Double-sided adhesive tapes
Engineered to Perform Better™ - www.orafol.com 13
Sta
nd
ard
Sta
nd
ard
Sta
nd
ard
* Only in connection with a certificate of conformity from ORAFOL® Europe GmbH.
Product Adhesive Carrier Thickness(WithoutLiner - micron)
Liner Adhesive180° peel(N/25 mm)
Shear strength(1 kg)
Loop track(N/25 mm)
Temperatureresistance(°C)
Application-specific characteristics(4 = highly recommended, 0 = not recommended)
Prime applications Standard width Master(mm)
(S) also as slit rolls
20 min 24h 23° C 70° C UV and age resist-ance
Short term tem-perature resist-ance
Water resist-ance
Solvent and plas-ticiser resist-ance
Adhe-sion to low-surface energy
ORABOND®
1349GIAD16 Tissue 100 90 g paper,
brown21 24 > 5 h 15 min 15 -40 to +140 4 2 2 2 2 Extremely flexible APEO free* tape for lamination of cellular rubber and
EPDM; also for textiles and wood, small-pore and impregnated foams, cellular PE, soft PVC and other smooth or slightly rough surfaces.
1000
ORABOND®
1350GIAD16 Scrim 230 90 g paper,
brown27 30 > 7 h 15 min 27 -40 to +140 4 2 2 2 3 Extremely flexible APEO free* tape for lamination of cellular rubber and
EPDM; also for textiles and wood, open-pore and impregnated foams, cellular PE, soft PVC and other rough, open surfaces; suitable for applications where resistance to high temperature, ageing and plasticisers are needed.
1000
ORABOND®
1346AD3 Tissue 110 90 g paper,
brown18 21 48 h 20 min 15 -40 to +100 4 2 2 2 2 Good distributor grade used for multiple end applications, rubber, leather,
textile and foam lamination, splicing of paper, cardboard and film.1000126014101550S
ORABOND®
1348AD7 Tissue 100 90 g paper,
brown19 22 24 h 30 min 14 -40 to +120 4 2 2 2 2 APEO-free* economy foam lamination product: for lamination of cellular
rubber, small pore and impregnated foams, felt fabrics and other smooth and slightly rough surfaces; highly resistant against ageing and plasticisers.
1000126014101550S
ORABOND®
1349AD16 Tissue 160 90 g paper,
brown
Also availablewith TM liner
25 27 > 72 h 30 min 26 -40 to +140 4 2 2 2 3 APEO-free* version of our market leading famous ORABOND® 1359 product with the same exceptional performance in applications with EPDM and other foams, especially suitable for flexible materials like cellular rubber, PVC, slightly porous foams, felts, plastic cuttings and other rough surfaces; good temperature, ageing, EPDM and plasticiser resistance.
1000126014101550S
ORABOND®
1359AD8 Tissue 160 90 g paper,
brown
Also availablewith TM liner
25 27 > 72 h 30 min 26 -40 to +140 4 2 2 2 3 High performance distributor grade used for multiple end applications, rubber, foam, textile, wood and soft PVC lamination, especially for bonding of EPDM foams and EPDM rubbers; recommended for rough open surfaces; APEO-free* version available: 1349.
1000126014101550S
ORABOND®
1358AD7 Tissue 155 90 g paper,
brown22 25 72 h 75 min 17 -40 to +120 4 2 2 2 3 APEO free*, softer version of ORABOND® 1349 for lamination of cellular
rubber, open-pore and impregnated foams, felt-fabrics and other rough, open surfaces; highly resistant against ageing and plasticisers.
1000126014101550S
ORABOND®
1367AD9 Tissue 150 90 g paper,
brown24 28 48 h 15 min 15 -40 to +120 4 2 2 2 2 General purpose lamination on glass, metal, PVC and PE foam and for
cardboard, paper and film splicing.1000S
Industrial markets
Engineered to Perform Better™ - www.orafol.com14
ORAFIX®
Repulpable and silicone splicing tapes
Mo
difi
ed
so
lve
nt
ac
rylic
Mo
difi
ed
so
lve
nt
ac
rylic
Do
ub
le-
Sili
co
ne
splic
e
Product Adhesive Carrier Thickness(WithoutLiner - micron)
Liner Colour Adhesive180° peel(N/25 mm)
Shear strength(1 kg)
Loop track(N/25 mm)
Temperatureresistance(°C)
Tensile Strength(N/25 mm)(DIN EN ISO 527)
Elongation %
(DIN EN ISO 527)
Prime applications Standard width Master(mm)
(S1)* only slit rolls
20 min 24h 23° C 70° C along across along across
ORAFIX®
1290RA3 Repulpable
soft tissue90 90 g paper,
whiteGreen 8
(1 min)10(20 min)
- - - 8 Up to 200 - - - - For manual and flying splice / roll changes; for high speed applications; FDA certification: 21 CFR Ch. I, § 175.105.
S1
ORAFIX®
1291RA2 Repulpable
tissue paper100 90 g paper,
whiteGreen 10
(1 min)11(20 min)
- - - 38 Up to 200 - - - - For flying splices in paper and printing industries (also very suitable for newsletter-printers); 1281 for applications with invisible splice; FDA certification: 21 CFR Ch. I, § 175.105.
S1
1281 RA4 White
ORAFIX®
1292RA2 Without 50 90 g paper,
whiteGreen
(20 min)
9(1 min)12
- - - 28 Up to 200 - - - - For flying splice in paper and printing industry with low adhesive thickness; FDA certification: 21 CFR Ch. I, § 175.105.
S1
ORAFIX®
1272RA3 Without 50 90 g paper,
whiteGren 8
(1 min)11(20 min)
- - - 33 Up to 200 - - - - For static splices with extremely thin gauge and corestarting; FDA certification: 21 CFR Ch. I, § 175.105.
S1
ORAFIX®
1293RA2 Repulpable
tissue paper60 90 g paper,
whiteGreen 6
(1 min)7(20 min
- - - 33 Up to 200 - - - - Thinner version of ORAFIX® 1291; for flying splices in paper and printing industry with reduced thickness; 1283 for applications with invisible splice; FDA certification: 21 CFR Ch. I, § 175.105.
S1
1283 RA4 White
ORAFIX®
1273RA3 Repulpable
soft tissue60 90 g paper,
whiteGreen 5
(1 min)6(20 min)
- - - 23 Up to 200 - - - - For static splices with extremely thin gauge and corestarting; FDA certification: 21 CFR Ch. I, § 175.105.
S1
ORAFIX®
1294
1294BF1294SL
RA2 Repulpable white paper
110 90 g paper,white
Green 11(1 min)15(20 min)
- - - 45 Up to 200 160 80 2 3.5 For butt-splice application e.g. customer-rolls in printing industries; FDA certification: 21 CFR Ch. I, § 175.105; 1294BF: butterflies, die-cuts for flying splice; 1294SL: with centre-slit liner for ease of application and handling.
S1
ORAFIX®
1295RA2 Repulpable
white paper55 65 g paper,
whiteGreen 4
(1 min)6(20 min)
- - - 28 Up to 200 25 14 2 2.5 Extremely thin tape for butt-splices and overlap splices; 1285 for applications with invisible splice; FDA certification: 21 CFR Ch. I, § 175.105.
S1
1285 RA4 White
ORAFIX®
1296RA2 Repulpable
white paper,one sidesiliconised
100 Without Green 7(1 min)8(20 min)
- - - 28 Up to 200 160 80 2 3.5 For roll-start and roll-end closure, very high tensile strength; 1286 for ap-plications with invisible splice; FDA certification: 21 CFR Ch. I, § 175.105.
S1
1286 RA4 White
ORAFIX®
1276RA3 Repulpable
white paper,one sidesiliconised
100 Without Green 6(1 min)7(20 min)
- - - 28 Up to 200 160 80 2 3.5 For roll-start and roll-end closure, very high tensile strength; FDA certification: 21 CFR Ch. I, § 175.105.
S1
ORAFIX®
1297RA2 Repulpable
white paper,siliconised
190 Without Green 14(1 min)16(20 min)
- - - Up to 200 210 100 8 5 Thicker version of ORAFIX® 1296, for roll-start and roll-end closure, with enormous high tensile strength; FDA certification: 21 CFR Ch. I, § 175.105.
S1
ORAFIX®
1288RA4 Repulpable
special paper,spittable
180 90 g paper,white
White 5*(1 min)> 5*(20 min)
- - - Up to 200 - - - - Double coated tape with splittable carrier for corestarting and roll-end closure. 1288 for applications with invisible splice; FDA certification: 21 CFR Ch. I, § 175.105.
S1
ORAFIX®
1305Sil 23 micron PET 60 Hard-PVC,
creped,white
Transparent 10 12 > 72 h > 1 h Up to 180 - - - - Splice tape for siliconised paper and other siliconised surfaces; rip-resistant.
S1
* Carrier splitting
Engineered to Perform Better™ - www.orafol.com 15
Product Adhesive Carrier Thickness(WithoutLiner - micron)
Liner Colour Adhesive180° peel(N/25 mm)
Shear strength(1 kg)
Loop track(N/25 mm)
Temperatureresistance(°C)
Tensile Strength(N/25 mm)(DIN EN ISO 527)
Elongation %
(DIN EN ISO 527)
Prime applications Standard width Master(mm)
(S1)* only slit rolls
20 min 24h 23° C 70° C along across along across
ORAFIX®
1290RA3 Repulpable
soft tissue90 90 g paper,
whiteGreen 8
(1 min)10(20 min)
- - - 8 Up to 200 - - - - For manual and flying splice / roll changes; for high speed applications; FDA certification: 21 CFR Ch. I, § 175.105.
S1
ORAFIX®
1291RA2 Repulpable
tissue paper100 90 g paper,
whiteGreen 10
(1 min)11(20 min)
- - - 38 Up to 200 - - - - For flying splices in paper and printing industries (also very suitable for newsletter-printers); 1281 for applications with invisible splice; FDA certification: 21 CFR Ch. I, § 175.105.
S1
1281 RA4 White
ORAFIX®
1292RA2 Without 50 90 g paper,
whiteGreen
(20 min)
9(1 min)12
- - - 28 Up to 200 - - - - For flying splice in paper and printing industry with low adhesive thickness; FDA certification: 21 CFR Ch. I, § 175.105.
S1
ORAFIX®
1272RA3 Without 50 90 g paper,
whiteGren 8
(1 min)11(20 min)
- - - 33 Up to 200 - - - - For static splices with extremely thin gauge and corestarting; FDA certification: 21 CFR Ch. I, § 175.105.
S1
ORAFIX®
1293RA2 Repulpable
tissue paper60 90 g paper,
whiteGreen 6
(1 min)7(20 min
- - - 33 Up to 200 - - - - Thinner version of ORAFIX® 1291; for flying splices in paper and printing industry with reduced thickness; 1283 for applications with invisible splice; FDA certification: 21 CFR Ch. I, § 175.105.
S1
1283 RA4 White
ORAFIX®
1273RA3 Repulpable
soft tissue60 90 g paper,
whiteGreen 5
(1 min)6(20 min)
- - - 23 Up to 200 - - - - For static splices with extremely thin gauge and corestarting; FDA certification: 21 CFR Ch. I, § 175.105.
S1
ORAFIX®
1294
1294BF1294SL
RA2 Repulpable white paper
110 90 g paper,white
Green 11(1 min)15(20 min)
- - - 45 Up to 200 160 80 2 3.5 For butt-splice application e.g. customer-rolls in printing industries; FDA certification: 21 CFR Ch. I, § 175.105; 1294BF: butterflies, die-cuts for flying splice; 1294SL: with centre-slit liner for ease of application and handling.
S1
ORAFIX®
1295RA2 Repulpable
white paper55 65 g paper,
whiteGreen 4
(1 min)6(20 min)
- - - 28 Up to 200 25 14 2 2.5 Extremely thin tape for butt-splices and overlap splices; 1285 for applications with invisible splice; FDA certification: 21 CFR Ch. I, § 175.105.
S1
1285 RA4 White
ORAFIX®
1296RA2 Repulpable
white paper,one sidesiliconised
100 Without Green 7(1 min)8(20 min)
- - - 28 Up to 200 160 80 2 3.5 For roll-start and roll-end closure, very high tensile strength; 1286 for ap-plications with invisible splice; FDA certification: 21 CFR Ch. I, § 175.105.
S1
1286 RA4 White
ORAFIX®
1276RA3 Repulpable
white paper,one sidesiliconised
100 Without Green 6(1 min)7(20 min)
- - - 28 Up to 200 160 80 2 3.5 For roll-start and roll-end closure, very high tensile strength; FDA certification: 21 CFR Ch. I, § 175.105.
S1
ORAFIX®
1297RA2 Repulpable
white paper,siliconised
190 Without Green 14(1 min)16(20 min)
- - - Up to 200 210 100 8 5 Thicker version of ORAFIX® 1296, for roll-start and roll-end closure, with enormous high tensile strength; FDA certification: 21 CFR Ch. I, § 175.105.
S1
ORAFIX®
1288RA4 Repulpable
special paper,spittable
180 90 g paper,white
White 5*(1 min)> 5*(20 min)
- - - Up to 200 - - - - Double coated tape with splittable carrier for corestarting and roll-end closure. 1288 for applications with invisible splice; FDA certification: 21 CFR Ch. I, § 175.105.
S1
ORAFIX®
1305Sil 23 micron PET 60 Hard-PVC,
creped,white
Transparent 10 12 > 72 h > 1 h Up to 180 - - - - Splice tape for siliconised paper and other siliconised surfaces; rip-resistant.
S1
Paper and printing industry markets
Engineered to Perform Better™ - www.orafol.com16
Syn
the
tic
rub
be
r
Product Adhesive Carrier Thickness(WithoutLiner - micron)
Liner Adhesive180° peel(N/25 mm)
Shear strength(1 kg)
Loop track(N/25 mm)
Temperatureresistance(°C)
Application-specific characteristics(4 = highly recommended, 0 = not recommended)
Prime applications Standard width Master (mm)
(S) also as slit rolls
20 min 24h 23° C 70° C UV and age resist-ance
Short term tem-perature resist-ance
Water resist-ance
Solvent and plas-ticiser resist-ance
Adhe-sion to low-surface energy
ORABOND®
1453SR1 18 micron
PP140 80 g paper,
brown27 30 > 72 h - 21 -40 to +70 1 1 3 1 4 Lamination of foams, boards, profiles, metal, paper and hard PVC,
high tack and immediate bonding.10001200S
ORABOND®
1453LTSR1 18 micron
PP100 80 g paper,
brown23 26 > 72 h - 18 -40 to +70 1 1 3 1 4 For general bonding and point of sale applications; for closed cellular foams
and rubber for even surfaces, economy version of 1453. Available in fingerlift spools.
10001200S
ORABOND®
1453LPSR1 18 micron
PP160 80 micron, PP film
red23 26 72 h - 18 -40 to +70 1 1 3 1 4 For extruded magnets, furniture trim and security bag seals; PP liner version
for spools 1453LT. Available in fingerlift spools.
1000S
ORABOND®
1455SR1 Tissue 210 80 g paper,
brown27 30 > 72 h - 16 -40 to +70 1 1 3 1 4 Foam lamination, general bonding; tissue carrier version of 1453. 1000
1200S
ORABOND®
1456SR6 Tissue 210 80 g paper,
brown18 21 > 72 h - 15 -40 to +80 1 1 3 1 4 Lamination of closed cell foams, PE and hard PVC, general fixing of wood,
metal and glass in internal applications. Available in fingerlift spools.
10001200S
ORABOND®
1459SR5 Tissue 260 80 g paper,
brown20 21 > 72 h - 13 -40 to +70 1 1 3 1 4 Lamination of closed cell foams, PE and hard PVC, general fixing of wood,
metal and glass in internal applications; for rough and even surfaces.10001200S
ORABOND®
1469SR10 Tissue 270 80 g paper,
brown14 15 > 72 h - 12 -40 to +70 1 1 3 1 2 For general fixing of wood, metal and glass in internal applications. 1000
1200S
ORABOND®
1473SR7 Tissue 130 80 g paper,
brown25 30 6 h - 30 -40 to +60 1 1 3 1 4 Lamination of impregnated foams and rough materials in
internal applications.1000S
ORABOND®
1486SR14 Tissue 130 90 g paper,
brown32 35 > 50 h - 36 -40 to +70 1 2 3 1 4 For bonding to EPDM rubber, for refrigeration evaporator mounting. 1000
1200S
ORABOND®
1486LTSR14 Tissue 190 90 g paper,
brown30 35 > 50 h - 36 -40 to +70 1 2 3 1 4 For bonding on smooth surfaces like metal, polystyrene, glass and hard
PVC; used extensively in refrigeration market for mounting of evaporator plate panels.
10001200S
ORABOND®
1489SR14 Glass scrim 250 90 g paper,
brown40 45 24 h - 56 -40 to +100 1 2 4 1 4 EPDM extrusions, impregnated foams, lamination of cellular rubber, filter
mounting; high rip-resistance and low elongation.1000S
ORABOND® Double-sided adhesive tapes
NEW
Engineered to Perform Better™ - www.orafol.com 17
Sta
nd
ard
Sta
nd
ard
Sta
nd
ard
Sta
nd
ard
Sta
nd
ard
Sta
nd
ard
Sta
nd
ard
Sta
nd
ard
Sta
nd
ard
Product Adhesive Carrier Thickness(WithoutLiner - micron)
Liner Adhesive180° peel(N/25 mm)
Shear strength(1 kg)
Loop track(N/25 mm)
Temperatureresistance(°C)
Application-specific characteristics(4 = highly recommended, 0 = not recommended)
Prime applications Standard width Master (mm)
(S) also as slit rolls
20 min 24h 23° C 70° C UV and age resist-ance
Short term tem-perature resist-ance
Water resist-ance
Solvent and plas-ticiser resist-ance
Adhe-sion to low-surface energy
ORABOND®
1453SR1 18 micron
PP140 80 g paper,
brown27 30 > 72 h - 21 -40 to +70 1 1 3 1 4 Lamination of foams, boards, profiles, metal, paper and hard PVC,
high tack and immediate bonding.10001200S
ORABOND®
1453LTSR1 18 micron
PP100 80 g paper,
brown23 26 > 72 h - 18 -40 to +70 1 1 3 1 4 For general bonding and point of sale applications; for closed cellular foams
and rubber for even surfaces, economy version of 1453. Available in fingerlift spools.
10001200S
ORABOND®
1453LPSR1 18 micron
PP160 80 micron, PP film
red23 26 72 h - 18 -40 to +70 1 1 3 1 4 For extruded magnets, furniture trim and security bag seals; PP liner version
for spools 1453LT. Available in fingerlift spools.
1000S
ORABOND®
1455SR1 Tissue 210 80 g paper,
brown27 30 > 72 h - 16 -40 to +70 1 1 3 1 4 Foam lamination, general bonding; tissue carrier version of 1453. 1000
1200S
ORABOND®
1456SR6 Tissue 210 80 g paper,
brown18 21 > 72 h - 15 -40 to +80 1 1 3 1 4 Lamination of closed cell foams, PE and hard PVC, general fixing of wood,
metal and glass in internal applications. Available in fingerlift spools.
10001200S
ORABOND®
1459SR5 Tissue 260 80 g paper,
brown20 21 > 72 h - 13 -40 to +70 1 1 3 1 4 Lamination of closed cell foams, PE and hard PVC, general fixing of wood,
metal and glass in internal applications; for rough and even surfaces.10001200S
ORABOND®
1469SR10 Tissue 270 80 g paper,
brown14 15 > 72 h - 12 -40 to +70 1 1 3 1 2 For general fixing of wood, metal and glass in internal applications. 1000
1200S
ORABOND®
1473SR7 Tissue 130 80 g paper,
brown25 30 6 h - 30 -40 to +60 1 1 3 1 4 Lamination of impregnated foams and rough materials in
internal applications.1000S
ORABOND®
1486SR14 Tissue 130 90 g paper,
brown32 35 > 50 h - 36 -40 to +70 1 2 3 1 4 For bonding to EPDM rubber, for refrigeration evaporator mounting. 1000
1200S
ORABOND®
1486LTSR14 Tissue 190 90 g paper,
brown30 35 > 50 h - 36 -40 to +70 1 2 3 1 4 For bonding on smooth surfaces like metal, polystyrene, glass and hard
PVC; used extensively in refrigeration market for mounting of evaporator plate panels.
10001200S
ORABOND®
1489SR14 Glass scrim 250 90 g paper,
brown40 45 24 h - 56 -40 to +100 1 2 4 1 4 EPDM extrusions, impregnated foams, lamination of cellular rubber, filter
mounting; high rip-resistance and low elongation.1000S
Paper and printing industry markets
Engineered to Perform Better™ - www.orafol.com18
Pu
re s
olv
en
t a
cry
licS
ynth
eti
c ru
bb
er
Product Adhesive Carrier Thickness(WithoutLiner - micron)
Liner Adhesive180° peel(N/25 mm)
Shear strength(1 kg)
Loop track(N/25 mm)
Temperatureresistance(°C)
Application-specific characteristics(4 = highly recommended, 0 = not recommended)
Prime applications Standard width Master (mm)
(S) also as slit rolls
20 min 24h 23° C 70° C UV and age resist-ance
Short term tem-perature resist-ance
Water resist-ance
Solvent and plas-ticiser resist-ance
Adhe-sion to low-surface energy
ORAMOUNT®
1810A1 PE foam, white,
1.0 mm1.1 140 g PE-paper,
blue> 16 > 16 > 1000 h > 72 h 20 -40 to +95 4 3 4 3 3 Mounting of window bars, signs, extrusion profiles and mirrors, for solar panel production;
complies with FIRA requirements.1250S
ORAMOUNT®
1810WA1 PE foam, white,
1.0 mm1.1 140 g PE-paper,
white> 16 > 16 > 1000 h > 72 h 20 -40 to +95 4 3 4 3 3 Sister product to our famous ORAMOUNT® 1810, with a new white PE paper liner for solar panel
frame bonding, also for mounting of mirrors, panels, signs, displays and product prototypes in the advertising industry, ideal for exhibitions, conferences and interior fit-outs.
1250S
ORAMOUNT®
1810K3A1 PE foam, white,
1.0 mm1.1 100 micron PP
film,yellow
> 16 > 16 > 1000 h > 72 h 20 -40 to +95 4 3 4 3 3 Mounting of mirrors, panels, handles, type and capacity signs and displays in advertising. Ideal tape for exhibitions, conferences and interior fit outs and for the solar industry; for solar panel frame bonding.
1250S
ORAMOUNT®
1821A1 PE foam, black,
1.0 mm1.1 140 g PE-paper,
blue> 16 > 16 > 1000 h > 72 h 20 -40 to +95 4 3 4 3 3 Sister product to our famous ORAMOUNT® 1810, with black foam carrier for solar panel frame
bonding where a black bond line is prefered; also for mounting of furniture trim, mirrors and panels where dark wood is used.
1250S
ORAMOUNT®
1821K3A1 PE foam, black,
1.0 mm1.1 100 micron PP
film,yellow
> 16 > 16 > 1000 h > 72 h 20 -40 to +95 4 3 4 3 3 Sister product to ORAMOUNT® 1821, with yellow polypropylene liner. 1250S
ORAMOUNT®
1815A1 PE foam, white,
1.5 mm1.6 140 g PE-paper,
blue> 16 > 16 > 1000 h > 72 h 20 -40 to +95 4 3 4 3 3 Mounting of mirrors, window bars (mutin bars), trims, panels and handles in furniture production
as well as signs, displays and product prototypes in the advertising industry; for lamination of aluminium, steel and GRP outer skins during the construction of truck containers.
1250S
ORAMOUNT®
1802A1 PE foam, white,
2.0 mm2.1 90 g PE-paper,
blue> 16 > 16 > 1000 h > 72 h 20 -40 to +70 4 3 4 4 2 Used for the installation of mirrors in the furniture and sanitary industry. For adhesion of aluminium,
steel and GRP outer skins during the construction of truck containers. For the Fixing of type and capacity signs as well as displays and product prototypes in the advertising industry. For the fixing of panels and handles in the appliance and electrical industry. Ideal for use in exhibitions, conferences and interior fit-outs.
1250S
ORAMOUNT®
1803A1 PE foam, black,
2.0 mm2.1 90 g PE-paper,
blue> 16 > 16 > 1000 h > 72 h 20 -40 to +70 4 3 4 4 2 Used for the installation of mirrors in the furniture and sanitary industry. For adhesion of aluminium,
steel and GRP outer skins during the construction of truck containers. For the Fixing of type and capacity signs as well as displays and product prototypes in the advertising industry. For the fixing of panels and handles in the appliance and electrical industry. Ideal for use in exhibitions, conferences and interior fit-outs.
1250S
ORAMOUNT®
1824A1 PE foam, black,
0.8 mm0.9 140 g PE-paper,
white17 20 > 1000 h > 72 h 28 -40 to +95 4 3 4 3 2 Optical lens grinding pads, automotive badge and trim mounting, wheel weights. 1250
S
ORAMOUNT®
1824L5A1 PE foam, black,
0.8 mm0.9 120 micron PE
film, dark green17 20 > 1000 h > 72 h 28 -40 to +125 4 3 4 3 2 Optical lens grinding pads, automotive badge and trim mounting, wheel weights. 1250
S
ORAMOUNT®
1850A1 / AM13 PE foam, black,
0.5 mm1.0 90 g paper,
white18 /> 30
> 18 /> 30
> 1000 h /> 300 h
> 72 h /1 h
- -40 to +80 4 2 4 3 3 For the production of high performance lens grinding pads in the optical industry. ORAMOUNT® 1850 is designed for use with the latest hydrophobic lens coatings on polymer and mineral lens.
1250
ORAMOUNT®
1825A1 PE foam, black,
0.5 mm0.6 140 g PE-paper,
white17 20 > 1000 h > 72 h 20 -40 to +95 4 3 4 3 2 Fixing of badges, trims, panels and other fixings in the automotive industry. 1250
S
ORAMOUNT®
1827L5A1 PE foam, black,
3.2 mm3.3 120 micron PE
film, dark green> 18 > 18 > 300 h > 6 h - -40 to +80 4 3 4 4 2 For constructional fixing and installation of a variety of materials such as metal, plastics, glass
and ceramics. Durable adhesion of plastic mouldings and polycarbonate surfaces for application such as ski goggles.
1250S
ORAMOUNT®
1831RL2 PE foam, white,
1.0 mm1.1 90 g paper,
white> 18 > 18 > 500 h 1 h 35 -30 to +70 1 1 4 1 4 General purpose fixing and high shear application, plastic hooks and hangers, mirror mounting;
complies with FIRA requirements, for rough surfaces. Available in fingerlift spools.
1250S
ORAMOUNT®
1840RL2 PE foam, white,
0.8 mm0.9 90 g paper,
white> 18 > 18 > 500 h 1 h 28 -30 to +70 1 1 4 1 4 General purpose fixing and high shear application, plastic hooks and hangers, mirror mounting;
complies with FIRA requirements; for apolar surfaces.1250S
ORAMOUNT®
1836RL2 PE foam, white,
1.5 mm1.6 90 g paper,
white> 18 > 18 > 500 h > 1 h 28 -30 to +70 1 1 4 1 4 General purpose fixing and high shear application, plastic hooks and hangers; for apolar
surfaces.1250S
ORAMOUNT® Double-sided adhesive tapes with foam carrier
NEW
NEW
NEW
NEW
Engineered to Perform Better™ - www.orafol.com 19
Sta
nd
ard
Sta
nd
ard
Sta
nd
ard
Sta
nd
ard
Sta
nd
ard
Sta
nd
ard
Product Adhesive Carrier Thickness(WithoutLiner - micron)
Liner Adhesive180° peel(N/25 mm)
Shear strength(1 kg)
Loop track(N/25 mm)
Temperatureresistance(°C)
Application-specific characteristics(4 = highly recommended, 0 = not recommended)
Prime applications Standard width Master (mm)
(S) also as slit rolls
20 min 24h 23° C 70° C UV and age resist-ance
Short term tem-perature resist-ance
Water resist-ance
Solvent and plas-ticiser resist-ance
Adhe-sion to low-surface energy
ORAMOUNT®
1810A1 PE foam, white,
1.0 mm1.1 140 g PE-paper,
blue> 16 > 16 > 1000 h > 72 h 20 -40 to +95 4 3 4 3 3 Mounting of window bars, signs, extrusion profiles and mirrors, for solar panel production;
complies with FIRA requirements.1250S
ORAMOUNT®
1810WA1 PE foam, white,
1.0 mm1.1 140 g PE-paper,
white> 16 > 16 > 1000 h > 72 h 20 -40 to +95 4 3 4 3 3 Sister product to our famous ORAMOUNT® 1810, with a new white PE paper liner for solar panel
frame bonding, also for mounting of mirrors, panels, signs, displays and product prototypes in the advertising industry, ideal for exhibitions, conferences and interior fit-outs.
1250S
ORAMOUNT®
1810K3A1 PE foam, white,
1.0 mm1.1 100 micron PP
film,yellow
> 16 > 16 > 1000 h > 72 h 20 -40 to +95 4 3 4 3 3 Mounting of mirrors, panels, handles, type and capacity signs and displays in advertising. Ideal tape for exhibitions, conferences and interior fit outs and for the solar industry; for solar panel frame bonding.
1250S
ORAMOUNT®
1821A1 PE foam, black,
1.0 mm1.1 140 g PE-paper,
blue> 16 > 16 > 1000 h > 72 h 20 -40 to +95 4 3 4 3 3 Sister product to our famous ORAMOUNT® 1810, with black foam carrier for solar panel frame
bonding where a black bond line is prefered; also for mounting of furniture trim, mirrors and panels where dark wood is used.
1250S
ORAMOUNT®
1821K3A1 PE foam, black,
1.0 mm1.1 100 micron PP
film,yellow
> 16 > 16 > 1000 h > 72 h 20 -40 to +95 4 3 4 3 3 Sister product to ORAMOUNT® 1821, with yellow polypropylene liner. 1250S
ORAMOUNT®
1815A1 PE foam, white,
1.5 mm1.6 140 g PE-paper,
blue> 16 > 16 > 1000 h > 72 h 20 -40 to +95 4 3 4 3 3 Mounting of mirrors, window bars (mutin bars), trims, panels and handles in furniture production
as well as signs, displays and product prototypes in the advertising industry; for lamination of aluminium, steel and GRP outer skins during the construction of truck containers.
1250S
ORAMOUNT®
1802A1 PE foam, white,
2.0 mm2.1 90 g PE-paper,
blue> 16 > 16 > 1000 h > 72 h 20 -40 to +70 4 3 4 4 2 Used for the installation of mirrors in the furniture and sanitary industry. For adhesion of aluminium,
steel and GRP outer skins during the construction of truck containers. For the Fixing of type and capacity signs as well as displays and product prototypes in the advertising industry. For the fixing of panels and handles in the appliance and electrical industry. Ideal for use in exhibitions, conferences and interior fit-outs.
1250S
ORAMOUNT®
1803A1 PE foam, black,
2.0 mm2.1 90 g PE-paper,
blue> 16 > 16 > 1000 h > 72 h 20 -40 to +70 4 3 4 4 2 Used for the installation of mirrors in the furniture and sanitary industry. For adhesion of aluminium,
steel and GRP outer skins during the construction of truck containers. For the Fixing of type and capacity signs as well as displays and product prototypes in the advertising industry. For the fixing of panels and handles in the appliance and electrical industry. Ideal for use in exhibitions, conferences and interior fit-outs.
1250S
ORAMOUNT®
1824A1 PE foam, black,
0.8 mm0.9 140 g PE-paper,
white17 20 > 1000 h > 72 h 28 -40 to +95 4 3 4 3 2 Optical lens grinding pads, automotive badge and trim mounting, wheel weights. 1250
S
ORAMOUNT®
1824L5A1 PE foam, black,
0.8 mm0.9 120 micron PE
film, dark green17 20 > 1000 h > 72 h 28 -40 to +125 4 3 4 3 2 Optical lens grinding pads, automotive badge and trim mounting, wheel weights. 1250
S
ORAMOUNT®
1850A1 / AM13 PE foam, black,
0.5 mm1.0 90 g paper,
white18 /> 30
> 18 /> 30
> 1000 h /> 300 h
> 72 h /1 h
- -40 to +80 4 2 4 3 3 For the production of high performance lens grinding pads in the optical industry. ORAMOUNT® 1850 is designed for use with the latest hydrophobic lens coatings on polymer and mineral lens.
1250
ORAMOUNT®
1825A1 PE foam, black,
0.5 mm0.6 140 g PE-paper,
white17 20 > 1000 h > 72 h 20 -40 to +95 4 3 4 3 2 Fixing of badges, trims, panels and other fixings in the automotive industry. 1250
S
ORAMOUNT®
1827L5A1 PE foam, black,
3.2 mm3.3 120 micron PE
film, dark green> 18 > 18 > 300 h > 6 h - -40 to +80 4 3 4 4 2 For constructional fixing and installation of a variety of materials such as metal, plastics, glass
and ceramics. Durable adhesion of plastic mouldings and polycarbonate surfaces for application such as ski goggles.
1250S
ORAMOUNT®
1831RL2 PE foam, white,
1.0 mm1.1 90 g paper,
white> 18 > 18 > 500 h 1 h 35 -30 to +70 1 1 4 1 4 General purpose fixing and high shear application, plastic hooks and hangers, mirror mounting;
complies with FIRA requirements, for rough surfaces. Available in fingerlift spools.
1250S
ORAMOUNT®
1840RL2 PE foam, white,
0.8 mm0.9 90 g paper,
white> 18 > 18 > 500 h 1 h 28 -30 to +70 1 1 4 1 4 General purpose fixing and high shear application, plastic hooks and hangers, mirror mounting;
complies with FIRA requirements; for apolar surfaces.1250S
ORAMOUNT®
1836RL2 PE foam, white,
1.5 mm1.6 90 g paper,
white> 18 > 18 > 500 h > 1 h 28 -30 to +70 1 1 4 1 4 General purpose fixing and high shear application, plastic hooks and hangers; for apolar
surfaces.1250S
Paper and printing industry markets
Engineered to Perform Better™ - www.orafol.com20
Mo
difi
ed
so
lve
nt
ac
rylic
Product Adhesive Carrier Thickness(WithoutLiner - micron)
Liner Adhesive180° peel(N/25 mm)
Shear strength(1 kg)
Loop track(N/25 mm)
Temperatureresistance(°C)
Application-specific characteristics(4 = highly recommended, 0 = not recommended)
Prime applications Standard width Master (mm)
(S) also as slit rolls
20 min 24h 23° C 70° C UV and age resist-ance
Short term tem-perature resist-ance
Water resist-ance
Solvent and plas-ticiser resist-ance
Adhe-sion to low-surface energy
ORAMOUNT®
1826WAM2 PE foam, white,
0.8 mm0.9 140 g PE-paper,
blue> 20 > 20 > 300 h > 6 h 28 -40 to +80 4 3 4 3 3 Mounting of metal and plastic signs and panels, plastic extrusions and
profiles and for other general fixing.1250S
ORAMOUNT®
1826AM2 PE foam, white,
0.8 mm0.9 90 g paper,
blue> 20 > 20 > 300 h > 6 h 20 -40 to +80 4 3 4 3 3 Mounting of mirrors, signs, window bars, and general purpose mounting. 1250
S
ORAMOUNT®
1811AM2 PE foam, white,
1.0 mm1.1 90 g paper,
blue> 18 > 18 > 300 h > 6 h 208 -40 to +80 4 3 4 3 3 General mounting applications, lamination of plastic hooks, plastic hangers,
cable trunking and furniture profiles; for interior application.1250S
ORAMOUNT®
1812AM2 PE foam, white,
1.0 mm1.1 90 g paper,
whiteAlso availablewith TM liner
> 18 > 18 > 300 h > 6 h 30 -40 to +80 4 3 4 3 3 Point of sale, general fixing and mounting, e.g. cable trunking, displays, signs; for interior application. Available in fingerlift spools.
1250S
ORAMOUNT®
1813K3AM2 PE foam, white,
1.0 mm1.1 100 micron PP
film,yellow
> 18 > 18 > 300 h > 6 h 28 -40 to +80 4 3 4 3 3 Sister product to ORAMOUNT® 1812 with yellow PP film liner, for bond-ing of plastic and metal extrusion profiles and plastic parts, e.g. panels, bars, signs, plexiglass mirrors and displays; high initial adhesion and shear strength. Available in fingerlift spools.
1250S
ORAMOUNT®
1852AM6 / AM2 PE foam, white,
1.0 mm1.2 90 g paper,
white5 / 18 6 /
> 18> 300 h /> 400 h
> 72 h /> 6 h
- -40 to +80 4 3 4 3 3 For use in applications where the foam is used as a temporary fixing or gasket. The adhesive on the liner side of this product is clean removable from most surfaces.
1250
ORAMOUNT®
1822AM2 PE foam, black,
1.0 mm1.1 90 g paper,
white> 18 > 18 > 300 h > 6 h 32 -40 to +80 4 3 4 3 3 Automotive after market trim and badge attachment, window bars,
lamination of metal, plastics, glass and ceramics.1250S
ORAMOUNT®
1822L5AM2 PE foam, black,
1.0 mm1.1 120 micron PE
film,dark green
> 18 > 18 > 300 h > 6 h 28 -40 to +80 4 3 4 3 3 Point of sale, general fixing and mounting, e.g. cable trunking, metal, plastics, glass and ceramics lamination.
1250S
ORAMOUNT®
1816AM2 PE foam, white,
1.5 mm1.6 90 g paper,
blue> 18 > 18 > 300 h > 6 h 20 -40 to +80 4 3 4 3 3 Metal pins, plastic hooks and hangers, cable trunking, furniture profiles,
exhibition and point of sale.1250S
ORAMOUNT®
1819AM2 PE foam, white,
2.0 mm2.1 90 g paper,
blue> 19 > 19 > 300 h > 3 h 28 -40 to +100 4 2 4 3 3 Furniture profiles, window seals, window bars, displays; for even surfaces. 1250
S
ORAMOUNT®
1807AM2 PE foam, black,
2.0 mm2.1 90 g paper,
blue> 19 > 19 > 300 h > 6 h - -40 to +80 4 3 4 3 3 For installation of even surfaced spray cast and extruded plastic parts such
as panels, bars and signs, as well as plexiglas mirrors for interior fit-outs and displays. For use as an adhesive medium for hooks, handles and dispensers on even surfaces.
1250S
ORAMOUNT®
1828AM2 PE foam, black,
3.0 mm3.1 90 g paper,
white> 18 > 18 > 300 h > 3 h 28 -40 to +90 4 2 4 3 3 For mounting and fixing of window profiles and seals where the 3 mm
product is required, for fixing of materials such as metal, plastics, glass, ceramics; good adhesion on difficult surfaces.
1250S
ORAMOUNT®
1818AM2 PE foam, white,
3.0 mm3.1 90 g paper,
white> 18 > 18 > 300 h > 5 h - -40 to +80 4 2 4 3 3 For bonding and installation of a variety of materials such as metais, plastics,
glass and ceramics. For durable adhesion of plastic mouldings.1250S
ORAMOUNT®
1829L5AM2 PE foam, black,
0.8 mm0.9 120 micron PE
film,green
> 18 > 18 > 300 h > 6 h 28 -40 to +80 4 3 4 3 3 For fixing of badges, trims and other external fixings in the automotive after market industry; also used for the production of optical lenses.
1250S
ORAMOUNT® Double-sided adhesive tapes with foam carrier
NEW
NEW
NEW
Engineered to Perform Better™ - www.orafol.com 21
Sta
nd
ard
Sta
nd
ard
Sta
nd
ard
Sta
nd
ard
Sta
nd
ard
Sta
nd
ard
Product Adhesive Carrier Thickness(WithoutLiner - micron)
Liner Adhesive180° peel(N/25 mm)
Shear strength(1 kg)
Loop track(N/25 mm)
Temperatureresistance(°C)
Application-specific characteristics(4 = highly recommended, 0 = not recommended)
Prime applications Standard width Master (mm)
(S) also as slit rolls
20 min 24h 23° C 70° C UV and age resist-ance
Short term tem-perature resist-ance
Water resist-ance
Solvent and plas-ticiser resist-ance
Adhe-sion to low-surface energy
ORAMOUNT®
1826WAM2 PE foam, white,
0.8 mm0.9 140 g PE-paper,
blue> 20 > 20 > 300 h > 6 h 28 -40 to +80 4 3 4 3 3 Mounting of metal and plastic signs and panels, plastic extrusions and
profiles and for other general fixing.1250S
ORAMOUNT®
1826AM2 PE foam, white,
0.8 mm0.9 90 g paper,
blue> 20 > 20 > 300 h > 6 h 20 -40 to +80 4 3 4 3 3 Mounting of mirrors, signs, window bars, and general purpose mounting. 1250
S
ORAMOUNT®
1811AM2 PE foam, white,
1.0 mm1.1 90 g paper,
blue> 18 > 18 > 300 h > 6 h 208 -40 to +80 4 3 4 3 3 General mounting applications, lamination of plastic hooks, plastic hangers,
cable trunking and furniture profiles; for interior application.1250S
ORAMOUNT®
1812AM2 PE foam, white,
1.0 mm1.1 90 g paper,
whiteAlso availablewith TM liner
> 18 > 18 > 300 h > 6 h 30 -40 to +80 4 3 4 3 3 Point of sale, general fixing and mounting, e.g. cable trunking, displays, signs; for interior application. Available in fingerlift spools.
1250S
ORAMOUNT®
1813K3AM2 PE foam, white,
1.0 mm1.1 100 micron PP
film,yellow
> 18 > 18 > 300 h > 6 h 28 -40 to +80 4 3 4 3 3 Sister product to ORAMOUNT® 1812 with yellow PP film liner, for bond-ing of plastic and metal extrusion profiles and plastic parts, e.g. panels, bars, signs, plexiglass mirrors and displays; high initial adhesion and shear strength. Available in fingerlift spools.
1250S
ORAMOUNT®
1852AM6 / AM2 PE foam, white,
1.0 mm1.2 90 g paper,
white5 / 18 6 /
> 18> 300 h /> 400 h
> 72 h /> 6 h
- -40 to +80 4 3 4 3 3 For use in applications where the foam is used as a temporary fixing or gasket. The adhesive on the liner side of this product is clean removable from most surfaces.
1250
ORAMOUNT®
1822AM2 PE foam, black,
1.0 mm1.1 90 g paper,
white> 18 > 18 > 300 h > 6 h 32 -40 to +80 4 3 4 3 3 Automotive after market trim and badge attachment, window bars,
lamination of metal, plastics, glass and ceramics.1250S
ORAMOUNT®
1822L5AM2 PE foam, black,
1.0 mm1.1 120 micron PE
film,dark green
> 18 > 18 > 300 h > 6 h 28 -40 to +80 4 3 4 3 3 Point of sale, general fixing and mounting, e.g. cable trunking, metal, plastics, glass and ceramics lamination.
1250S
ORAMOUNT®
1816AM2 PE foam, white,
1.5 mm1.6 90 g paper,
blue> 18 > 18 > 300 h > 6 h 20 -40 to +80 4 3 4 3 3 Metal pins, plastic hooks and hangers, cable trunking, furniture profiles,
exhibition and point of sale.1250S
ORAMOUNT®
1819AM2 PE foam, white,
2.0 mm2.1 90 g paper,
blue> 19 > 19 > 300 h > 3 h 28 -40 to +100 4 2 4 3 3 Furniture profiles, window seals, window bars, displays; for even surfaces. 1250
S
ORAMOUNT®
1807AM2 PE foam, black,
2.0 mm2.1 90 g paper,
blue> 19 > 19 > 300 h > 6 h - -40 to +80 4 3 4 3 3 For installation of even surfaced spray cast and extruded plastic parts such
as panels, bars and signs, as well as plexiglas mirrors for interior fit-outs and displays. For use as an adhesive medium for hooks, handles and dispensers on even surfaces.
1250S
ORAMOUNT®
1828AM2 PE foam, black,
3.0 mm3.1 90 g paper,
white> 18 > 18 > 300 h > 3 h 28 -40 to +90 4 2 4 3 3 For mounting and fixing of window profiles and seals where the 3 mm
product is required, for fixing of materials such as metal, plastics, glass, ceramics; good adhesion on difficult surfaces.
1250S
ORAMOUNT®
1818AM2 PE foam, white,
3.0 mm3.1 90 g paper,
white> 18 > 18 > 300 h > 5 h - -40 to +80 4 2 4 3 3 For bonding and installation of a variety of materials such as metais, plastics,
glass and ceramics. For durable adhesion of plastic mouldings.1250S
ORAMOUNT®
1829L5AM2 PE foam, black,
0.8 mm0.9 120 micron PE
film,green
> 18 > 18 > 300 h > 6 h 28 -40 to +80 4 3 4 3 3 For fixing of badges, trims and other external fixings in the automotive after market industry; also used for the production of optical lenses.
1250S
Paper and printing industry markets
Engineered to Perform Better™ - www.orafol.com22
Page 4 / 5 Page 6 / 7 Page 8 / 9
Prime applications
Application type
1373
1373
W
1374
1375
/ S
1377
/ S
1325
1327
/ S
1368
1370
1160
1162
1194
1194
K3
1195
1198
1197
08
1195
08
1198
08
1398
1395
1391
PP
1397
1397
PP
1392
1393
1396
1301
1399
1386
1354
L
1387
Plastic Extrusion & Moulding • • • • • • • • • • •
Name Plates & Signs • • • • • • • • • • • • • • • • • •
Furniture Trim &Curtain Fitments • • • • • • • •
Mirror Mounting • • • • •
Solar Panels
Optical ConversionProducts
Metal Assembly • • • • • • • • • • • • • • • • • • • • •
Rubber Conversion • • • • • • • • •
Foam Conversion– Auto • • • • •
Foam Conversion– Refrigeration • • • • •
Foam Conversion– General • • • • • •
Auto Trim Mounting • • • • • • • • • • • • • •
Electronics • • • • • • • • • • • • • • • • • • • • • • • • • •
Telecommunication • • • • • • • • • • • • • • • • • •
Point of sale • • • • • • • •
Marine Sail Bonding • • • •
Paper & BoardFlying Splice
Paper & BoardStatic Splice
Paper & BoardCore Starting
Paper & BoardRoll Closing
Paper & BoardAutomatic Splicing
Paper & Board non repulpable Splicing & Core Starting
• • • • • • •
Located just outside of Berlin in the heart of Europe, the ORAFOL Europe GmbH headquarters is the hub of the organisation’s culture of leadership and excellence.
Page 12 / 13 Page 14 / 15 Page 16 / 17 Page 10 / 11
1389
1331
1333
1334
1354
N
1344
N
1349
GI
1350
GI
1346
134
8
1349
1359
1358
1367
129
0
1291
1281
1292
1272
1293
1283
1273
1294
/ B
F / S
L
1295
1285
129
6
1286
1276
1297
128
8
1305
1453
1453
LT
1453
LP
1455
1456
1459
1469
1473
1486
1486
LT
1489
1810
1810
W
1810
K3
1821
1821
K3
1815
1802
1803
1824
1824
L5
1850
1825
1827
L5
1831
1840
1836
1826
W
1826
1811
1812
1813
K3
1852
1822
1822
L5
1816
1819
1807
1828
1818
1829
L5
Application type
• • • • • • • • • • • • • • • • • • • • • • • • • Plastic Extrusion & Moulding
• • • • • • • • • • • • • • • • • • • • • • Name Plates & Signs
• • • • • • • • • • Furniture Trim &Curtain Fitments
• • • • • • • • • • • • • • • • • • • • Mirror Mounting
• • • • • Solar Panels
• • Optical ConversionProducts
• • • • • • • • • • • • • • • • • • • • • • • • • Metal Assembly
• • • • • • • • • • • • Rubber Conversion
• • • • • • • • • • • • • Foam Conversion– Auto
• • • • • • • • • • • • • • Foam Conversion– Refrigeration
• • • • • • • • • • • • • • • • • • Foam Conversion– General
• • • • • • • • • • • • • • • • Auto Trim Mounting
• • • • • • • • Electronics
• • • • • Telecommunication
• • • • • • • • • • • • • • • • • • • • • • • • • • • • Point of sale
• Marine Sail Bonding
• • • • • • • Paper & BoardFlying Splice
• • • • • • • • • • Paper & BoardStatic Splice
• • • • • • • • • • • • • Paper & BoardCore Starting
• • • • • • • • • • Paper & BoardRoll Closing
• • • • • • • • • Paper & BoardAutomatic Splicing
• • • • • • •Paper & Board non repulpable Splicing & Core Starting
Page 16 / 17 Page 18 / 19 Page 20 / 21
1389
1331
1333
1334
1354
N
1344
N
1349
GI
1350
GI
1346
134
8
1349
1359
1358
1367
129
0
1291
1281
1292
1272
1293
1283
1273
1294
/ B
F / S
L
1295
1285
129
6
1286
1276
1297
128
8
1305
1453
1453
LT
1453
LP
1455
1456
1459
1469
1473
1486
1486
LT
1489
1810
1810
W
1810
K3
1821
1821
K3
1815
1802
1803
1824
1824
L5
1850
1825
1827
L5
1831
1840
1836
1826
W
1826
1811
1812
1813
K3
1852
1822
1822
L5
1816
1819
1807
1828
1818
1829
L5
Application type
• • • • • • • • • • • • • • • • • • • • • • • • • Plastic Extrusion & Moulding
• • • • • • • • • • • • • • • • • • • • • • Name Plates & Signs
• • • • • • • • • • Furniture Trim &Curtain Fitments
• • • • • • • • • • • • • • • • • • • • Mirror Mounting
• • • • • Solar Panels
• • Optical ConversionProducts
• • • • • • • • • • • • • • • • • • • • • • • • • Metal Assembly
• • • • • • • • • • • • Rubber Conversion
• • • • • • • • • • • • • Foam Conversion– Auto
• • • • • • • • • • • • • • Foam Conversion– Refrigeration
• • • • • • • • • • • • • • • • • • Foam Conversion– General
• • • • • • • • • • • • • • • • Auto Trim Mounting
• • • • • • • • Electronics
• • • • • Telecommunication
• • • • • • • • • • • • • • • • • • • • • • • • • • • • Point of sale
• Marine Sail Bonding
• • • • • • • Paper & BoardFlying Splice
• • • • • • • • • • Paper & BoardStatic Splice
• • • • • • • • • • • • • Paper & BoardCore Starting
• • • • • • • • • • Paper & BoardRoll Closing
• • • • • • • • • Paper & BoardAutomatic Splicing
• • • • • • •Paper & Board non repulpable Splicing & Core Starting
Standard productsWe offer standard products in logs and master jumbos, both edge trimmed and untrimmed. We offer logs with flush core or extended core. For high volume users we offer certain products in extra long slit rolls, or in spool wound format. The minimum order for standard products is 1 x 50 m log.Available slit roll width*: 12, 15, 19, 25, 30, 38, 50, 60, 75, 100 mm.
Customer Special Options If you cannot find the suitable product that meets the requirements for your special application ORAFOL® offers special custom products. In most cases a special product can be designed for you on the basis of our liner, adhesive and carrier.The minimum order for a catalogue product with a non standard liner is 3000 m² per order. The minimum order for designed special products on the basis of our charts is 5000 m².
Carriers: you will find several carriers on our website: www.orafol.com
Adhesives
Name Type Properties & Features
A1A2A4A7
pure solvent acrylicpure solvent acrylicpure solvent acrylicpure acrylic
High shear adhesive with excellent resistance to high temperatures, solvents, humidity and outdoor exposure.Medium shear adhesive with good adhesion to low energy surfaces. This product has high tack and bonds well to most foams.High clarity grade with exellent polycarbonate and acrylic adhesion.High shear adhesive with excellent high tack, excellent adhesion on all high-energy surfaces.
AM1AM2
AM5AM6AM7
AM10AM12
modified solvent acrylicmodified solvent acrylic
modified solvent acrylicmodified solvent acrylicmodified solvent acrylic
modified solvent acrylicmodified solvent acrylic
Medium shear adhesive with excellent adhesion to most foams where plasticisers and other impregnates are used.High shear, high tack adhesive with excellent balance of properties for use in high performance bonding applications. This product features good adhesion to low surface energy plastics.Ultra removable adhesive with excellent no-build adhesion to most surfaces.Version of AM5 with increased adhesion and good removability.High sheer and high tack adhesive with good temperature performance for paper and board splicing. The adhesive is coloured red for visual splicing applications.Higher shear version of AM2 for high temperature and electronics applications.Excellent high tack and outstanding adhesion on high-energy and especially on low-energy surfaces.
AD3AD4AD7AD8AD9AD16
modified dispersion acrylatemodified dispersion acrylatemodified dispersion acrylatemodified dispersion acrylatemodified dispersion acrylatemodified dispersion acrylate
General purpose medium tack adhesive with good ageing performance on EPDM and other critical foams.High performance acrylic adhesive, specially designed for bonding applications and white goods.Aggressive tack for most foam bonding applications where good resistance to ageing and solvents is required.High performance adhesive with good balance of properties for applications with good temperature and ageing resistance.General purpose adhesive with good balance of adhesion and tack for foam and felt lamination. Also for simple paper splicing.High performance adhesive with good balance of properties: APEO-free and a universal solution for most bonding applications.
RL2RA2/RA4RA3Sil
synthetic rubberrepulpable acrylicrepulpable acrylicsilicone
High shear solvent rubber with good adhesion to low surface energy plastics.Repulpable adhesive with good shear and temperature performance for paper and board splicing. Meets TAPPI requirements.Drier version of RA2 to avoid bleeding problems. Meets TAPPI requirements.Adhesive with good adhesion to siliconised surfaces.
SR1SR5SR6SR7SR10SR14
synthetic rubbersynthetic rubbersynthetic rubbersynthetic rubbersynthetic rubbersynthetic rubber
High tack adhesive with good adhesion to EPDM foams.General purpose high tack adhesive for splicing and lamination applications.Economy adhesive for general purpose bonding.High tack adhesive with good adhesion to cellular polyolefin foams.General purpose adhesive with good balance of adhesion and tack for foam and felt lamination.High tack adhesive with good resistance against plasticisers, particularly suitable for EPDM foam profiles.
Liner Type g/m2 Colour
Standard (for acrylics)Standard (for hot melts)09for AM2 foams
siliconised glassinesiliconised glassinesiliconised glassinesiliconised glassinesiliconised glassine
9080909090
brownbrownwhitebluewhite
WWAA1 foams
siliconised PE coated kraftsiliconised PE coated kraftsiliconised PE coated kraft
140100140
whitewhiteblue
K3L5PP filmPET film
siliconised PP filmsiliconised polyethylene filmsiliconised polypropylene filmsiliconised polyester film
1001158070
yellowdark greentransparent redclear
ORABOND® Sizes ORAMOUNT® Sizes
6/9 mm x 5000 m; 6/12 mm x 4000 m; 9/12 mm x 4000 m;9/15 mm x 3000 m; 12/15 mm x 3000 m; 12/19 mm x 2500 m;19/25 mm x 1500 m; and 23/25 mm x 1500 m
6/12 mm x 1500 m; 9/15 mm x 1000 m; 12/19 mm x 750 m;19/25 mm x 500 m; and 23/25 mm x 500 m
Products Products
ORABOND® 1194; 1391PP; 1397; 1397PP; 1392; 1331;1333; 1453LT; 1453LP; 1456
ORAMOUNT® 1831; 1813K3; 1812
2 core sizes available 152 mm x 250 mm and 152 mm x 180 mm depending upon product and length.
MOQ – 50 spools
Please contact your sales correspondent for detailed offers and samples.
Carrier Type micron Colour
fleecePP fleecePETPETPP filmGI
non-woven paper tissuepolypropylene fleecepolyester filmpolyester filmpolypropylene fleecescrim
3535121218/28/57-
whitewhiteclearblackclearwhite
Hard PVCPVC
hard PVC filmsoft PVC film
3890
whitewhite
special scrim PETglass scrimtextilePE
diamondglass scrimrayon clothPE foam various
bluewhitewhitewhite/black
Liners
ORAFOL® Fingerlift Spools (Extended liner format)
Carriers
ORAFOL® Europe GmbH
Orafolstraße 2, D-16515 Oranienburg, Germany Tel: +49 (0)3301 864-0 · Fax: +49 (0)3301 864-100 [email protected] · www.orafol.com
Bro
chur
e 92
0317
, ©
201
2, O
RA
FOL
Eur
op
e G
mb
H.
OR
ALI
TE
® a
nd R
eflex
ite® a
re r
egis
tere
d tr
adem
arks
of O
RA
FOL
Eur
op
e G
mb
H. -
482
01-1
01 (1
2/20
12)
Industrial TapesEngineered to Perform Better™