Industrial/Commercial Evaporative Coolers Specification Guide

Industrial/Commercial Evaporative CoolersSpecification Guide

Industrial/Commercial Evaporative CoolersSpecification Guide

MODULARCONFIGURATIONS

The unique modular design of thedual inlet side- and down-draft

models are easy to reconfigure for difficult or customized

installations.

1. CONSTRUCTION – Heavy gauge galvanized steel isused for cabinet panels and other load bearing components. Vacuum-formed ABS plastic water reservoirs and thick polystyreneevaporative media shields keep water from coming into contact withthe steel cabinet for long-lasting durability.

2. EVAPORATIVE MEDIA – The cellulose paper of theevaporative media is treated to ensure a high water absorption rateand to resist biological degradation.

3. FINISH – All steel components (excluding the blower wheel,shaft, and pulley) are chemically treated and covered with anelectrostatically-applied polyester finish at a thickness of 1 to 1.5mil to protect the cooler from scratches and corrosion. This finishmeets or exceeds requirements for the following tests:• 1000-Hour Salt Spray Test-ASTM B117• Abrasion Resistance Test-ASTM 4060-84• Impact Resistance Test-ASTM D2794• 2400-Hour Imersion Test-ASTM D870• Adhesion Test-ASTM D3359

OINTSDVANTAGE

SAS/SAD 100SAS/SAD 10012SAS/SAD 150

AS/AD 150AS/AD 15012AS/AD/AU 20012

SAS/SAD 15012AS/AD 100AS/AD 10012

SPECIFICATION GUIDE FOR MODELS:

Double Inlet Configuration

Single Inlet Configurationconnect

BLOWER UNIT

BLOWER UNIT

INLET UNIT

INLET UNIT

INLET UNIT

rotateremove

BLOWER UNIT

INLET UNIT

PA

MASTERCOOL COOLERS ARE MADE BY THEBEST: CHAMPION COOLER

One of the largest manufacturers of evaporative coolers, ChampionCooler has produced evaporative coolers that deliver highperformance results and long-lasting durability for over 40 years.Champion’s engineering, design, and production efforts are directedat the continued manufacture of products that deliver maximumperformance with minimum maintenance.

The performance or Sensible Heat Capacity of any evaporative cooler isa function of both the CFM and the efficiency, which should be consideredas part of the sizing process. To help ensure proper sizing of a MasterCool,use the Index on the following page to locate Performance Data and SizingTables for a specific MasterCool model. Follow the procedure below todetermine the cooler size.

1. Determine design conditions.• Outside Dry-Bulb• Outside Wet-Bulb• Inside Dry-Bulb (TI)

2. Determine the design Sensible Heat Load (Btuh).3. Determine the cooler leaving air temperature (LAT) from the tables.

EXAMPLE

• Outside Dry-Bulb = 105• Outside Wet-Bulb = 65• Inside Dry-Bulb = 80Determine the number of AD100 UltraCool coolers with 2 horsepower

motors required to cool 125,000 Btuh heat load. Assume .5" (water) externalstatic pressure.

Using the Sizing Tables, the following information should be calculated:

LAT = 72CFM = 7368SHC = 1.08(80-72)7368 = 63,660 BtuhNumber of Coolers = 125,000/63,660 = 2

4. Determine CFM from the performance tables.5. Calculate Sensible Heat Capacity of cooler using: SHC =1.08(TI-LAT)CFM6. Determine the number of coolers by dividing the Sensible Heat Load by the Sensible Heat Capacity.

NSTRUCTIONSIZING

Q

D

E

E

A

F

G

X

D

S

QD

C

R

C

N

B

A

E E

N

T

W

H

UBPW

J

L

Y

M

J

SAD OUTLETSAD OUTLET

SASOUTLET

TOP VIEW WEIV EDISWEIV TNORF

* All measurements in inches.

D4545

48 1/4

48 1/4

H100W

10012W150W

15012W

WETMODULENUMBER

SAS/SAD 100BSAS/SAD 10012BSAS/SAD 150BSAS/SAD 15012B

BLOWERMODEL

NUMBERCABINET

W44445454

63 3/8

67 3/8

66 5/8

70 5/8

C(SAS)13 19/32

13 19/32

16 13/16

16 13/16

A

DUCTOPENING

B21 3/4

21 3/4

26 7/8

26 7/8

21 3/4

21 3/4

26 7/8

26 7/8

U(SAD)21 11/32

21 11/32

19 5/32

19 5/32

EP(SAD)11 5/8

11 5/8

10 11/16

10 11/16

1 29/32

1 29/32

2 7/32

2 7/32

DUCTLOCATION

F

DRAINLOCATION

G22 1/2

22 1/2

24 1/8

24 1/8

12 1/2

16 1/2

12 1/2

16 1/2

X

MEDIADIMENSION

Y44 3/4

44 3/4

4848

36 5/8

36 5/8

46 3/8

46 3/8

WETMODULE

J18 1/2

22 1/2

18 1/2

22 1/2

L

WATERSERVICE

M5 7/8

5 7/8

5 7/8

5 7/8

14 5/8

18 5/8

14 5/8

18 5/8

S

ELECTRICSERVICE

T21 1/2

21 1/2

23 1/8

23 1/8

5 5/32

5 5/32

5 5/32

5 5/32

N4 3/4

4 3/4

4 3/4

4 3/4

Q

SKIDLOCATIONS

R4 3/4

4 3/4

4 3/4

4 3/4

42425252

DIMENSIONAL DATA*

PERFORMANCE Certified Air Delivery At Various Increments Of Static Pressure (Inches Static Pressure Water Gauge)INDEX TABLEINDEX TABLE

CFM

SAS/SAD 100PAGE 2

SAS/SAD 10012PAGE 4

SAS/SAD 150PAGE 6

SAS/SAD 15012PAGE 8

AS/AD 100PAGE 1

AS/AD 10012PAGE 3

AS/AD 150PAGE 5

AS/AD 15012PAGE 7

AS/AD/AU20012PAGE 9

MODEL& PAGE NO.

0" 0.1" 0.2" 0.3" 0.4" 0.5" 0.6"

Performance shown is for installation type B - free inlet, ducted outlet. Power rating (BHP) does not includedrive losses. Performance ratings do not include the effects of appurtenances in the airstream.

CFM

537759186774

537159116767

707277838910N/AN/A

699777028817N/AN/A

774585249758

11569

743181789362

11099

11405130571548017719

11375130201543817672

16267192862207724301

CFM

512156846574

506456276513

6622737285489476N/A

6539728684559375N/A

753083339596

11463

725580249235

11001

10892126001508217364

10905126041508417360

15716188202167023929

CFM

486354516366

479453756286

6203698782059159N/A

6087687680919044N/A

727581099407

11285

705278429075

10868

10463122041473517050

10482122251474917060

15200183712127023562

CFM

460552156164

453651426076

5769660278708855N/A

5603645077348719N/A

700478689204

11121

683576498914

10736

10064118441441016756

10079118651443416777

14696179432088823204

CFM

433649805956

426949075872

5298619975338555N/A

5051599473598389N/A

672976188990

10950

661174508744

10598

9671114971410616479

9678115141413316505

14190175182051422866

CFM

405847345751

398546635666

4777576471828244N/A

4415547769618043N/A

646073688773

10773

637672448572

10457

9276111531381016214

9265111651383816242

13665170922014222528

375444795537

366743995456

4201528568127924N/A

37174893652576839377

619371238556

10592

613170308393

10313

8874108151352015947

8830108071354015983

13110166611976922190

0.8"

CFM

309739245095

295238095008

30414231599372369032

24973637552768698751

564666388124

10224

561065808024

10016

8006101131294815440

7867100581289915463

11886157521901521510

0.9"

CFM

--36194859

259134804755

25223699553768668741

20133085497664168407

535763897913

10039

5327634378279862

75309741

1265915188

73259651

1264015207

11194152721862921171

1.0"

CFM

--33074613

226131454497

20403199506764708436

15712609442559328046

5045613776989856

5031609576319709

70179361

1236114937

67539220

1232814947

10450147601822920823

0.7"

CFM

342942095320

331841155238

36074764641675929315

30584260605072939070

592368788340

10407

587768098209

10165

8456104671323415694

8366104401324615724

12521162111939521852

HOW TO USETHIS INDEX

Using the coolingrequirement variables ofCooling Feet per Minute

and External StaticPressure (shown as inches

of water), locate thespecific MasterCool model

required and itscorresponding page

number. Turn to theindicated page for specific

Performance Data andSizing Tables. Follow theSizing Instructions on the

front inside cover todetermine the MasterCool

product for any coolinginstallation.

AB

LE

IN

DE

X

AD OUTLETEE A

Q

XD

G

F

GD

S

QW

R

C

J JN

P

B

B

AL

MME E

N

Y

L

P

D

H

UB

T

AD OUTLET

C

TOP VIEW WEIV EDISWEIV TNORF BLOWERSECTION

AS OUTLET

AU OUTLET


D4545

48 1/4

48 1/4

60 1/4

H100W

10012W150W

15012W20012W

WETMODULENUMBER

AS/AD 100BAS/AD 10012BAS/AD 150BAS/AD 15012BAS/AD/AU 20012B

BLOWERMODEL

NUMBERCABINET

W44445454

59 1/4

8290

85 1/4

93 1/4

105 1/4

C(AS)13 19/32

13 19/32

16 13/16

16 13/16

18 11/16

A

DUCTOPENING

B21 3/4

21 3/4

26 7/8

26 7/8

31 3/4

21 3/4

21 3/4

26 7/8

26 7/8

31 3/4

U(AD)21 11/32

21 11/32

19 5/32

19 5/32

25 1/4

EP(AU)11 5/8

11 5/8

10 11/16

10 11/16

14 1/4

N/AN/AN/AN/A

24 29/32

DUCTLOCATION

F

DRAINLOCATION

G22 1/2

22 1/2

24 1/8

24 1/8

30 1/8

12 1/2

16 1/2

12 1/2

16 1/2

16 1/8

X

MEDIADIMENSION

Y44 3/4

44 3/4

484860

36 5/8

36 5/8

46 3/8

46 3/8

51 5/8

WETMODULE

J18 1/2

22 1/2

18 1/2

22 1/2

22 1/2

L

WATERSERVICE

M5 7/8

5 7/8

5 7/8

5 7/8

5 7/8

14 5/8

18 5/8

14 5/8

18 5/8

18 5/8

S

ELECTRICSERVICE

T39 7/8

43 7/8

41 1/2

45 1/2

51 5/8

5 5/32

5 5/32

5 5/32

5 5/32

5 5/32

N23 1/4

27 1/4

23 1/4

27 1/4

27 1/4

Q

SKIDLOCATIONS

R4 3/4

4 3/4

4 3/4

4 3/4

4 3/4

42425252

57 1/4

DIMENSIONAL DATA*

SIZING TABLES

SHEAVE SELECTION

MOTOR SPECIFICATIONS

SPECIFICATIONS PERFORMANCE Certified Air Delivery At .1" Increments Of External Static Pressure (Inches Static Pressure Water Gauge)

2791012 11 6 5 4 3 1

OUTDOOR WET-BULB

LATGPHLATGPHLATGPHLATGPH

85

95

105

115

OUTDOORDRY BULB

TEMP.

1-1/2 H.P. MOTOR / CFM-

OUTDOOR WET-BULB

2 H.P. MOTOR / CFM-SP*

OUTDOOR WET-BULB

3 H.P. MOTOR / CFM-SP*

Performance shown is for installation type B - Free inlet, Ducted outlet. Power rating (BHP) does not include drive losses. Models AS/AD 100 include the affects of an 8 inch thick evaporative media on the inlet. & Blower Speed are determined from the SPECIFICATION table above, use this information to select the proper pulley-belt kit from the SHEAVE SELECTION table below.

RPMCFM RPMRPMCFMCFM

ASMODEL

BELTAD

MODELBELT

OPER.WGT. CFM

MAXB.H.P.

0" 0.1" 0.2" 0.3" 0.4" 0.5" 0.6"RPM CFM RPM CFM RPM CFM RPM RPM

0.8"CFM RPM

0.9"CFM RPM

1.0"CFM RPM

0.7"CFM

20/11-106.6-6/3

24/13.2-127.5-6.8/3.410.6-9.6/4.8

16.7-7-15.2/7.6

7/87/87/87/81 1/81 1/8

131333

115/208-230208-230/460115/208-230208-230/460208-230/460208-230/460

H.P.VOLTS

BLOWER MOTORSSPEED

111111

414049448387

110459110463-9110460

110464-9110465-9110466-9

1 1/21 1/2

2235

PHASE MOTORAMPS*

SHAFTDIA.

MOTORWGT(LB)

MOTORPART NO.

*Amperage shown is from National Electrical Code. Use amperage shown on motor nameplate to determine motor protector.

WATTS7377

GPM (5 FT. HEAD)4.64.6

PUMP PART NO.110467110468

VOLTS115230

AMPS1.0

0.58

8433455523590

443465533600

422445513580

412434502569

D8450D8450D8550D8600

A82B83B86B87

ASMODEL

BELTA76B77B80B81

ADMODEL

BELT7/87/8

1 1/81 1/8

MAUREYSHEAVE

MOTORH.P.

BLOWER RPM/MOTOR SHEAVE 1/2 TURN DOWN

1-1/2235

391414482549

401424492559

454475543610

464485553620

475495563630

485506574641

496516584651

506526594661

3DI-103DI-153DI-203DI-25

SHEAVEBORE

CHAMPION-ADPULLEY-BELT

KIT NO.3DI-303DI-353DI-403DI-45

CHAMPION-ASPULLEY-BELT

KIT NO.

* Static Pressure (inches of water). GPH = Water consumption at design conditions but does not include bleed-off amount. Amount of bleed-off will vary with different water sources, but an amount equal to 10% of water consumption at any design condition is considered sufficient for average water. LAT = Cooler Discharge Temperature.

Pumps - 2 Required.

757711792282338444

OUTDOOR WET-BULB656922723374447654

5562336444

––––

757710792181318341

656921713173417551

5561316341––––

757710791981288338

656919712873387547

5561286338––––

11569 / 0 10773 / .5 9856 / 1.05 H.P. MOTOR / CFM-SP*

727581099407

11285

384418473555

373408465549

753083339596

11463

A76B77B80B81

A82B83B86B87

706710723739

1 1/2235

774585249758

11569

364400458543

700478689204

11121

397429482563

672976188990

10950

409441492570

646073688773

10773

422452502578

619371238556

10592

434464512587

564666388124

10224

460486532603

535763897913

10039

474498542612

5045613776989856

489510552620

592368788340

10407

447475522595

7577

8791580238231

656915702372317438

5560236231––––

75777

781380208126

656813702071267333

5560206126––––

7576

5781079168021

656810691670217226

5559166021––––

7745 / 0 6460 / .5 5045 / 1.0

7577

8791781258233

656917712572337442

5561256233––––

75777

791580228229

656915702272297437

5560226229––––

75776

781280198125

656812701971257331

5560196125

–––

8524 / 0 7368 / .5 6137 / 1.0

7577

9791981288338

656919712873387547

5561286338––––

7577

9791781268334

656917712673347443

5561266334––––

75778

791580238231

656915702372317438

5560236231

––––

9758 / 0 8773 / .5 7698 / 1.0

When the Cooler Model No, Motor H.P.,

Q

D

E

E

A

F

G

X

D

S

QD

C

R

C

N

B

A

E E

N

T

W

H

UBPW

J

L

Y

M

J


SASOUTLET



D4545

48 1/4

48 1/4

H100W

10012W150W

15012W

WETMODULENUMBER


BLOWERMODEL

NUMBERCABINET

W44445454

63 3/8

67 3/8

66 5/8

70 5/8

C(SAS)13 19/32

13 19/32

16 13/16

16 13/16

A

DUCTOPENING

B21 3/4

21 3/4

26 7/8

26 7/8

21 3/4

21 3/4

26 7/8

26 7/8

U(SAD)21 11/32

21 11/32

19 5/32

19 5/32

EP(SAD)11 5/8

11 5/8

10 11/16

10 11/16

1 29/32

1 29/32

2 7/32

2 7/32

DUCTLOCATION

F

DRAINLOCATION

G22 1/2

22 1/2

24 1/8

24 1/8

12 1/2

16 1/2

12 1/2

16 1/2

X

MEDIADIMENSION

Y44 3/4

44 3/4

4848

36 5/8

36 5/8

46 3/8

46 3/8

WETMODULE

J18 1/2

22 1/2

18 1/2

22 1/2

L

WATERSERVICE

M5 7/8

5 7/8

5 7/8

5 7/8

14 5/8

18 5/8

14 5/8

18 5/8

S

ELECTRICSERVICE

T21 1/2

21 1/2

23 1/8

23 1/8

5 5/32

5 5/32

5 5/32

5 5/32

N4 3/4

4 3/4

4 3/4

4 3/4

Q

SKIDLOCATIONS

R4 3/4

4 3/4

4 3/4

4 3/4

42425252

DIMENSIONAL DATA*

SIZING TABLES

SHEAVE SELECTION



2791012 11 6 5 4 3 1

75775

791081158321

OUTDOOR WET-BULB


85

95

105

115

656910711573217526

5561156321

––––

75774

798

80128216

6569

8701272167421

5560126216––––

75762

775

797

809

6567

569

770

97112

55597

609––––

5435 / 0 4118 / .5 2197 / 1.0OUTDOORDRY BULB

TEMP.

3/4 H.P. MOTOR / CFM-SP*

75776

791182178422


5562176422

––––

7577

579

981148319

65699

711473197523

5561146319––––

7577

378

680

98113

6568

670

971137316

55609

6113––––

5983 / 0 4856 / .5 3092 / 1.01 H.P. MOTOR / CFM-SP*

75776

801382198425


5562196425

––––

7577

6791181178422

656911711774227628

5561176422––––

75774

799

81138318

65699

711373187522

5561136318

––––

6848 / 0 5942 / .5 4639 / 1.01-1/2 H.P. MOTOR / CFM-SP*

Performance shown is for installation type B - Free inlet, Ducted outlet. Power rating (BHP) does not include drive losses. Models SAS/SAD 100 include the affects of an 8 inch thick evaporative media on the inlet. , & Blower Speed are determined from the SPECIFICATION table above, use this information to select the proper pulley-belt kit from the SHEAVE SELECTION table b elow.

RPMCFM RPM486354516366

376409463

RPM364398453

CFM512156846574

CFMB77B77B77

SASMODEL

BELTB83B83B83

SADMODEL

BELT480483498

OPER.WGT. CFM

MAXB.H.P.

0" 0.1" 0.2" 0.3" 0.4" 0.5" 0.6"

3/41

1 1/2

RPM537759186774

352388444

CFM RPM460552156164

389421472

CFM RPM433649805956

402432482

CFM RPM405847345751

415444492

RPM375444795537

430456502

0.8"CFM RPM

309739245095

469485524

0.9"CFM RPM

--36194859

--503536

1.0"CFM RPM

--33074613

--523548

0.7"CFM

342942095320

448470513

13.8/7.6-6.96.9

3.5-3.2/1.616/8

84.6-4.2/2.1

5/85/85/85/85/87/8

113113

115/208-230230

208-230/460115/230

230208-230/460

H.P.VOLTS

BLOWER MOTORSSPEED

121121

242920282934

110455110456110461110457110458

110462-9

3/43/43/4111

PHASE MOTORAMPS*

SHAFTDIA.

MOTORWGT(LB)

MOTORPART NO.

20/11-106.6-6/3

7/87/8

13

115/208-230208-230/460

H.P.VOLTS

BLOWER MOTORSSPEED

11

4140

110459110463-9

1 1/21 1/2

PHASE MOTORAMPS*

SHAFTDIA.

MOTORWGT(LB)

MOTORPART NO.


WATTS7377



VOLTS115230

AMPS1.0

0.58

8343455343455

353465353465

333445333445

323434323434

8350K8450K8350

8450K

B83B83B83B83

SASMODEL

BELTB77B77B77B77

SADMODEL

BELT5/8*5/8*7/8*7/8*

MAUREYSHEAVE

MOTORH.P.


3/4, 13/4, 1

11, 1 1/2

303414303414

313424313424

364475364475

374485374485

384495384495

394506394506

404516404516

414526414526

3DI-903DI-95

3DI-1003DI-105

SHEAVEBORE

CHAMPION-SADPULLEY-BELT

KIT NO.3DI-1103DI-1153DI-1203DI-125

CHAMPION-SASPULLEY-BELT

KIT NO.

*When selecting 1 H.P. motor, be sure to select Pulley-Belt Kit with same pulley bore as shaft size of motor selected.

* Static Pressure (inches of water). GPH = Water consumption at design conditions but does not include bleed-off amount. Amount of bleed-off will vary with different water sources, but an amount equal to 10% of water consumption at any design condition is considered sufficient for average water.

Pumps - 1 Required.

When the Cooler Model No, Motor H.P.

LAT = Cooler Discharge Temperature.

AD OUTLETEE A

Q

XD

G

F

GD

S

QW

R

C

J JN

P

B

B

AL

MME E

N

Y

L

P

D

H

UB

T

AD OUTLET

C


AS OUTLET

AU OUTLET


D4545

48 1/4

48 1/4

60 1/4

H100W

10012W150W

15012W20012W

WETMODULENUMBER


BLOWERMODEL

NUMBERCABINET

W44445454

59 1/4

8290

85 1/4

93 1/4

105 1/4

C(AS)13 19/32

13 19/32

16 13/16

16 13/16

18 11/16

A

DUCTOPENING

B21 3/4

21 3/4

26 7/8

26 7/8

31 3/4

21 3/4

21 3/4

26 7/8

26 7/8

31 3/4

U(AD)21 11/32

21 11/32

19 5/32

19 5/32

25 1/4

EP(AU)11 5/8

11 5/8

10 11/16

10 11/16

14 1/4

N/AN/AN/AN/A

24 29/32

DUCTLOCATION

F

DRAINLOCATION

G22 1/2

22 1/2

24 1/8

24 1/8

30 1/8

12 1/2

16 1/2

12 1/2

16 1/2

16 1/8

X

MEDIADIMENSION

Y44 3/4

44 3/4

484860

36 5/8

36 5/8

46 3/8

46 3/8

51 5/8

WETMODULE

J18 1/2

22 1/2

18 1/2

22 1/2

22 1/2

L

WATERSERVICE

M5 7/8

5 7/8

5 7/8

5 7/8

5 7/8

14 5/8

18 5/8

14 5/8

18 5/8

18 5/8

S

ELECTRICSERVICE

T39 7/8

43 7/8

41 1/2

45 1/2

51 5/8

5 5/32

5 5/32

5 5/32

5 5/32

5 5/32

N23 1/4

27 1/4

23 1/4

27 1/4

27 1/4

Q

SKIDLOCATIONS

R4 3/4

4 3/4

4 3/4

4 3/4

4 3/4

42425252

57 1/4

DIMENSIONAL DATA*

SIZING TABLES

SHEAVE SELECTION



2791012 11 6 5 4 3 1

OUTDOOR WET-BULB


85

95

105

115

OUTDOORDRY BULB

TEMP.OUTDOOR WET-BULB OUTDOOR WET-BULB

Performance shown is for installation type B - Free inlet, Ducted outlet. Power rating (BHP) does not include drive losses. Models AS/AD 10012 include the affects of a 12 inch thick evaporative media on the inlet. , & Blower Speed are determined from the SPECIFICATION table above, use this information to select the proper pulley-belt kit from the SHEAVE SELECTION table below.

RPMCFM RPMRPMCFMCFM

ASMODEL

BELTAD

MODELBELT

OPER.WGT. CFM

MAXB.H.P.


0.8"CFM RPM

0.9"CFM RPM

1.0"CFM RPM

0.7"CFM

20/11-106.6-6/3

24/13.2-127.5-6.8/3.4

10.6-9.6/4.816.7-15.2/7.6

7/87/87/87/81 1/81 1/8

131333

115/208-230208-230/460115/208-230208-230/460208-230/460208-230/460

H.P.VOLTS

BLOWER MOTORSSPEED

111111

414049448387

110459110463-9110460

110464-9110465-9110466-9

1 1/21 1/2

2235

PHASE MOTORAMPS*

SHAFTDIA.

MOTORWGT(LB)

MOTORPART NO.


WATTS7377



VOLTS115230

AMPS1.0

0.58

8433455523590

443465533600

422445513580

412434502569

D8450D8450D8550D8600

A82B83B86B87

ASMODEL

BELTA76B77B80B81

ADMODEL

BELT7/87/8

1 1/81 1/8

MAUREYSHEAVE

MOTORH.P.


1-1/2235

391414482549

401424492559

454475543610

464485553620

475495563630

485506574641

496516584651

506526594661

3DI-103DI-153DI-203DI-25

SHEAVEBORE


KIT NO.3DI-303DI-353DI-403DI-45


KIT NO.


Pumps - 2 Required.

OUTDOOR WET-BULB

705278429075

10868

400436494581

390427487575

725580249235

11001

A76B77B80B81

A82B83B86B87

801805818834

1 1/2235

743181789362

11099

382421482571

683576498914

10736

411446502587

661174508744

10598

424457511594

637672448572

10457

437468520601

613170308393

10313

450480531609

561065808024

10016

477504551625

5327634378279862

492517562634

5031609576319709

507529672643

587768098209

10165

464492541617

75768

771778257934

656717682569347042

5558255934––––

7576

7771478217928

656714682169287035

5558215928––––

7576

6771177177822

656711671768226928

5557175822––––

7431 / 0 6376 / .5 5031 / 1.01-1/2 H.P. MOTOR / CFM-SP*

7576

9771878287937

656718682869377046

5558285937––––

7576

8771678247932

656716682469327040

5558245932––––

7576

7771378207927

656713682069276933

5558205927

–––

8178 / 0 7244 / .5 6095 / 1.02 H.P. MOTOR / CFM-SP*

757611772178327942

656721683269427053

5558325942––––

75769

771978287938

656719682869387047

5558285938––––

75768

771778257933

656717682569337042

5558255932

––––

9362 / 0 8572 / .5 7631 / 1.03 H.P. MOTOR / CFM-SP*

757612772578378049

656725683770497162

5558376049––––

757611772378347946

656723683469467157

5558345946

––––

757611772178327942

656721683269427053

5558325942

––––

11099 / 0 10457 / .5 9709 / 1.05 H.P. MOTOR / CFM-SP*


Q

D

E

E

A

F

G

X

D

S

QD

C

R

C

N

B

A

E E

N

T

W

H

UBPW

J

L

Y

M

J


SASOUTLET



D4545

48 1/4

48 1/4

H100W

10012W150W

15012W

WETMODULENUMBER


BLOWERMODEL

NUMBERCABINET

W44445454

63 3/8

67 3/8

66 5/8

70 5/8

C(SAS)13 19/32

13 19/32

16 13/16

16 13/16

A

DUCTOPENING

B21 3/4

21 3/4

26 7/8

26 7/8

21 3/4

21 3/4

26 7/8

26 7/8

U(SAD)21 11/32

21 11/32

19 5/32

19 5/32

EP(SAD)11 5/8

11 5/8

10 11/16

10 11/16

1 29/32

1 29/32

2 7/32

2 7/32

DUCTLOCATION

F

DRAINLOCATION

G22 1/2

22 1/2

24 1/8

24 1/8

12 1/2

16 1/2

12 1/2

16 1/2

X

MEDIADIMENSION

Y44 3/4

44 3/4

4848

36 5/8

36 5/8

46 3/8

46 3/8

WETMODULE

J18 1/2

22 1/2

18 1/2

22 1/2

L

WATERSERVICE

M5 7/8

5 7/8

5 7/8

5 7/8

14 5/8

18 5/8

14 5/8

18 5/8

S

ELECTRICSERVICE

T21 1/2

21 1/2

23 1/8

23 1/8

5 5/32

5 5/32

5 5/32

5 5/32

N4 3/4

4 3/4

4 3/4

4 3/4

Q

SKIDLOCATIONS

R4 3/4

4 3/4

4 3/4

4 3/4

42425252

DIMENSIONAL DATA*

AD

10

01

2

SIZING TABLES

SHEAVE SELECTION



2791012 11 6 5 4 3 1

OUTDOOR WET-BULB


85

95

105

115

OUTDOORDRY BULB


RPMCFM RPMRPMCFMCFM

SASMODEL

BELTSAD

MODELBELT

OPER.WGT. CFM

MAXB.H.P.


0.8"CFM RPM

0.9"CFM RPM

1.0"CFM RPM

0.7"CFM

13.8/7.6-6.96.9

3.5-3.2/1.616/8

84.6-4.2/2.1

5/85/85/85/85/87/8

113113

115/208-230230

208-230/460115/230

230208-230/460

H.P.VOLTS

BLOWER MOTORSSPEED

121121

242920282934

110455110456110461110457110458

110462-9

3/43/43/4111

PHASE MOTORAMPS*

SHAFTDIA.

MOTORWGT(LB)

MOTORPART NO.

20/11-106.6-6/3

7/87/8

13

115/208-230208-230/460

H.P.VOLTS

BLOWER MOTORSSPEED

11

4140

110459110463-9

1 1/21 1/2

PHASE MOTORAMPS*

SHAFTDIA.

MOTORWGT(LB)

MOTORPART NO.

*Amperage shown is from National Electrical Code.

WATTS7377



VOLTS115230

AMPS1.0

0.58

8343455343455

353465353465

333445333445

323434323434

8350K8450K8350

8450K

B83B83B83B83

SASMODEL

BELTB77B77B77B77

SADMODEL

BELT5/8*5/8*7/8*7/8*

MAUREYSHEAVE

MOTORH.P.


3/4, 13/4, 1

11, 1 1/2

303414303414

313424313424

364475364475

374485374485

384495384495

394506394506

404516404516

414526414526

3DI-903DI-95

3DI-1003DI-105

SHEAVEBORE


KIT NO.3DI-1103DI-1153DI-1203DI-125


KIT NO.


* Static Pressure (inches of water). GPH = Water consumption at design conditions but does not include bleed-off amount. Amount of bleed-off will an amount equal to 10% of water consumption at any design condition is considered sufficient for average water.

LAT = Cooler Discharge Temperature.

Pumps - 1 Required.

479453756286

386420475

374410466

506456276513

B77B77B77

B83B83B83

527530545

3/41

1 1/2

537159116767

362359457

453651426076

397431484

426949075872

410441494

398546635666

423453503

366743995456

439465513

295238095008

481495534

259134804755

507514546

226131454497

534536560

331841155238

458479523

75766

771278177923

656712681769237029

5558175923

––––

7576

6771278127916

656712681769167020

5558135923––––

7576

276

577

778

9

65665

677

689

6811

55577

589––––

5377 / 0 4007 / .5 2120 / 1.0

7576

6771378197925

656713681969257132

5558195925––––

7576

6771078157920

656713681569207025

5558195920

––––

7576

577

778107813

656710681068136916

5558165813––––

5917 / 0 4712 / .5 2970 / 1.01 H.P. MOTOR / CFM-SP*

75767

771479228029

656714692270297136

5559226029––––

7576

6771278188025

656712681870257131

5558186025

––––

75765

771078157919

656710681569197024

5558155919

––––

6761 / 0 5761 / .5 4447 / 1.01-1/2 H.P. MOTOR / CFM-SP*3/4 H.P. MOTOR / CFM-SP*

Performance shown is for installation type B - Free inlet, Ducted outlet. Power rating (BHP) does not include drive losses. Models SAS/SAD 10012 include the affects of a 12 inch thick evaporative media on the inlet. & Blower Speed are determined from the SPECIFICATION table above, use this information to select the proper pulley-belt kit from the SHEAVE SELECTION table below. When the Cooler Model No, Motor H.P.

Use amperage shown on motor nameplate to determine motor protector.

vary with different water sources, but

AD OUTLETEE A

Q

XD

G

F

GD

S

QW

R

C

J JN

P

B

B

AL

MME E

N

Y

L

P

D

H

UB

T

AD OUTLET

C


AS OUTLET

AU OUTLET


D4545

48 1/4

48 1/4

60 1/4

H100W

10012W150W

15012W20012W

WETMODULENUMBER


BLOWERMODEL

NUMBERCABINET

W44445454

59 1/4

8290

85 1/4

93 1/4

105 1/4

C(AS)13 19/32

13 19/32

16 13/16

16 13/16

18 11/16

A

DUCTOPENING

B21 3/4

21 3/4

26 7/8

26 7/8

31 3/4

21 3/4

21 3/4

26 7/8

26 7/8

31 3/4

U(AD)21 11/32

21 11/32

19 5/32

19 5/32

25 1/4

EP(AU)11 5/8

11 5/8

10 11/16

10 11/16

14 1/4

N/AN/AN/AN/A

24 29/32

DUCTLOCATION

F

DRAINLOCATION

G22 1/2

22 1/2

24 1/8

24 1/8

30 1/8

12 1/2

16 1/2

12 1/2

16 1/2

16 1/8

X

MEDIADIMENSION

Y44 3/4

44 3/4

484860

36 5/8

36 5/8

46 3/8

46 3/8

51 5/8

WETMODULE

J18 1/2

22 1/2

18 1/2

22 1/2

22 1/2

L

WATERSERVICE

M5 7/8

5 7/8

5 7/8

5 7/8

5 7/8

14 5/8

18 5/8

14 5/8

18 5/8

18 5/8

S

ELECTRICSERVICE

T39 7/8

43 7/8

41 1/2

45 1/2

51 5/8

5 5/32

5 5/32

5 5/32

5 5/32

5 5/32

N23 1/4

27 1/4

23 1/4

27 1/4

27 1/4

Q

SKIDLOCATIONS

R4 3/4

4 3/4

4 3/4

4 3/4

4 3/4

42425252

57 1/4

DIMENSIONAL DATA*

D 1

50

SIZING TABLES

SHEAVE SELECTION



2791012 11 6 5 4 3 1

OUTDOOR WET-BULB


85

95

105

115

OUTDOORDRY BULB


Performance shown is for installation type B - Free inlet, Ducted outlet. Power rating (BHP) does not include drive losses. Models AS/AD 150 include the affects of an 8 inch thick evaporative media on the inlet. & Blower Speed are determined from the SPECIFICATION table above, use this information to select the proper pulley-belt kit from the SHEAVE SELECTION table below.

RPMCFM RPMRPMCFMCFM

ASMODEL

BELTAD

MODELBELT

OPER.WGT. CFM

MAXB.H.P.


0.8"CFM RPM

0.9"CFM RPM

1.0"CFM RPM

0.7"CFM

24/13.2-127.5-6.8/3.410.6-9.6/4.8

16.7-15.2/7.624.2-22/11

7/87/81 1/81 1/81 3/8

13333

115/208-230208-230/460208-230/460208-230/460208-230/460

H.P.VOLTS

BLOWER MOTORSSPEED

11111

49448387121

110460110464-9110465-9110466-9110470-9

2235

7 1/2

PHASE MOTORAMPS*

SHAFTDIA.

MOTORWGT(LB)

MOTORPART NO.


WATTS7377



VOLTS115230

AMPS1.0

0.58

8325381381437493

333390390446502

316373373429485

308364364420476

D8400D8450D8450D8550D8600

B96B96B100B100B101

ASMODEL

BELTB90B90B92B93B95

ADMODEL

BELT7/87/8

1 1/81 1/81 3/8

MAUREYSHEAVE

MOTORH.P.


2235

7-1/2

291347347403459

299356356412468

342398398454510

350407407463519

359415415471527

367424424480536

376432432488544

384441441497553

3DI-503DI-523DI-563DI-603DI-65

SHEAVEBORE


KIT NO.3DI-703DI-723DI-753DI-803DI-86


KIT NO.


Pumps - 2 Required.

OUTDOOR WET-BULB

10463122041473517050

338381446507

328373439500

10892126001508217364

B90B92B93B95

B96B100B100B101

854867883919

235

7 1/2

11405130571548017719

317363430492

10064118441441016756

347390454513

9671114971410616479

357398461520

9276111531381016214

367406468526

8874108151352015947

378415475532

8006101131294815440

403434489544

753097411265915188

418444496550

701793611236114937

436456504557

8456104671323415694

390424482538

757712792381358347

656923713573477459

5561356347––––

757710781980298239

656819702972397349

5560296239

––––

75777

781579228129

656815692271297237

5559226129––––

11902 / 0 9697 / .5 7347 / 1.02 H.P. MOTOR / CFM-SP*

757713792681398352

656926713973527566

5561396352––––

757711792381348246

656923713472467457

5561346246––––

757710792080298239

656920702972397449

5560296239––––

13626 / 0 11669 / .5 9775 / 1.03 H.P. MOTOR / CFM-SP*

757715793082468461

656930724674617676

5562466461––––

757714792881428355

656928714273557569

5561426355––––

757713792581388350

656925713873507563

5561386350––––

16154 / 0 14468 / .5 12915 / 1.05 H.P. MOTOR / CFM-SP*

757717803482518468

657034725174687785

5562516468

––––

757716803282488464

657032724874647679

5562486464––––

757715793082448459

656930724474597674

5562446459––––

18493 / 0 16996 / .5 15626 / 1.07-1/2 H.P. MOTOR / CFM-SP*

When the Cooler Model No, Motor H.P.,

Q

D

E

E

A

F

G

X

D

S

QD

C

R

C

N

B

A

E E

N

T

W

H

UBPW

J

L

Y

M

J


SASOUTLET



D4545

48 1/4

48 1/4

H100W

10012W150W

15012W

WETMODULENUMBER


BLOWERMODEL

NUMBERCABINET

W44445454

63 3/8

67 3/8

66 5/8

70 5/8

C(SAS)13 19/32

13 19/32

16 13/16

16 13/16

A

DUCTOPENING

B21 3/4

21 3/4

26 7/8

26 7/8

21 3/4

21 3/4

26 7/8

26 7/8

U(SAD)21 11/32

21 11/32

19 5/32

19 5/32

EP(SAD)11 5/8

11 5/8

10 11/16

10 11/16

1 29/32

1 29/32

2 7/32

2 7/32

DUCTLOCATION

F

DRAINLOCATION

G22 1/2

22 1/2

24 1/8

24 1/8

12 1/2

16 1/2

12 1/2

16 1/2

X

MEDIADIMENSION

Y44 3/4

44 3/4

4848

36 5/8

36 5/8

46 3/8

46 3/8

WETMODULE

J18 1/2

22 1/2

18 1/2

22 1/2

L

WATERSERVICE

M5 7/8

5 7/8

5 7/8

5 7/8

14 5/8

18 5/8

14 5/8

18 5/8

S

ELECTRICSERVICE

T21 1/2

21 1/2

23 1/8

23 1/8

5 5/32

5 5/32

5 5/32

5 5/32

N4 3/4

4 3/4

4 3/4

4 3/4

Q

SKIDLOCATIONS

R4 3/4

4 3/4

4 3/4

4 3/4

42425252

DIMENSIONAL DATA*

SIZING TABLES

SHEAVE SELECTION



2791012 11 6 5 4 3 1

OUTDOOR WET-BULB


85

95

105

115

OUTDOORDRY BULB


Performance shown is for installation type B - Free inlet, Ducted outlet. Power rating (BHP) does not include drive losses. Models SAS/SAD 150 include the affects of an 8 inch thick evaporative media on the inlet. , & Blower Speed are determined from the SPECIFICATION table above, use this information to select the proper pulley-belt kit from the SHEAVE SELECTION table below.

RPMCFM RPMRPMCFMCFM

SASMODEL

BELTSAD

MODELBELT

OPER.WGT. CFM

MAXB.H.P.


0.8"CFM RPM

0.9"CFM RPM

1.0"CFM RPM

0.7"CFM

13.8/7.6-6.96.9

3.5-3.2/1.616/8

84.6-4.2/2.120/11-106.6-6/3

5/85/85/85/85/87/87/87/8

11311313

115/208-230230

208-230/460115/230

230208-230/460115/208-230208-230/460

H.P.VOLTS

BLOWER MOTORSSPEED

12112111

2429202829344140

110455110456110461110457110458

110462-9110459

110463-9

3/43/43/4111

1 1/21 1/2

PHASE MOTORAMPS*

SHAFTDIA.

MOTORWGT(LB)

MOTORPART NO.

24/13.2-127.5-6.8/3.4

10.6-9.6/4.8

7/87/81 1/8

133

115/208-230208-230/460208-230/460

H.P.VOLTS

BLOWER MOTORSSPEED

111

494483

110460110464-9110465-9

223

PHASE MOTORAMPS*

SHAFTDIA.

MOTORWGT(LB)

MOTORPART NO.


WATTS7377



VOLTS115230

AMPS1.0

0.58

8287381287381437437

296390296390446446

278373278373429429

269364269364420420

8350K8450K8350

8450K85508550

B96B96B96B96B96

B100

SASMODEL

BELTB90B90B90B90B90B92

SADMODEL

BELT5/8*5/8*7/8*7/8*

7/81 1/8

MAUREYSHEAVE

MOTORH.P.


3/4, 13/4, 1

11, 1 1/2, 21 1/2, 2

3

253347253347403403

261356261356412412

304398304398454454

313407313407463463

321415321415471471

330424330424480480

338432338432488488

347441347441497497

3DI-1303DI-1353DI-1403DI-1453DI-1553DI-161

SHEAVEBORE


KIT NO.3DI-1653DI-1703DI-1753DI-1803DI-1853DI-190


KIT NO.



Pumps - 1 Required.

6203698782059159N/A

298324365399N/A

287314356390N/A

6622737285489476N/A

B90B90B90B90B92

B96B96B96B96B100

584593608612624

3/41

1 1/223

707277838910N/AN/A

275302346N/AN/A

5769660278708855N/A

308333374406N/A

5298619975338555N/A

321343382414N/A

4777576471828244N/A

336355391421N/A

4201528568127924N/A

355369401430N/A

30414231599372369032

402406424448493

25223699553768668741

424427439459500

20403199506764708436

443448456471509

36074764641675929315

378386412438486

7577

7791481218328

656914712173287535

5561216328––––

75775

789

80148218

6568

9701472187323

5560146218

––––

7576

278

579

781

9

6568

569

771

97211

5559

761

9––––

7072 / 0 4777 / .5 2040 /1.03/4 H.P. MOTOR / CFM-SP*

75778

791582238430

656915722374307638

5562236430––––

7577

6791181178222

656911711772227428

5561176222––––

7576

378

779108114

6568

7691071147217

5559106114––––

7783 / 0 5764 / .5 3199 /1.01 H.P. MOTOR / CFM-SP*

75788

801782258434

657017722574347742

5562256434

––––

75777

791481208327

656914712073277534

5561206327

––––

75775

799

80148219

65689

701472197323

5560146219

––––

8910 / 0 7182 / .5 5067 / 1.01-1/2 H.P. MOTOR / CFM-SP*

7577

9801782268434


5562266434––––

75778

801582238431

657015722374317639

5562236431––––

75776

791281188324

656912711873247530

5561186324

––––

9476 /.1 8244 / .5 6470 / 1.02 H.P. MOTOR / CFM-SP*

75––––––––

OUTDOOR WET-BULB65––––––––

55––––––––

7577

9801782268434

657017722674347743

5562266434––––

7577

8801582238431

657015722374317639

5562236431––––

9315 / .7 8436 / 1.03 H.P. MOTOR / CFM-SP*


AD OUTLETEE A

Q

XD

G

F

GD

S

QW

R

C

J JN

P

B

B

AL

MME E

N

Y

L

P

D

H

UB

T

AD OUTLET

C


AS OUTLET

AU OUTLET


D4545

48 1/4

48 1/4

60 1/4

H100W

10012W150W

15012W20012W

WETMODULENUMBER


BLOWERMODEL

NUMBERCABINET

W44445454

59 1/4

8290

85 1/4

93 1/4

105 1/4

C(AS)13 19/32

13 19/32

16 13/16

16 13/16

18 11/16

A

DUCTOPENING

B21 3/4

21 3/4

26 7/8

26 7/8

31 3/4

21 3/4

21 3/4

26 7/8

26 7/8

31 3/4

U(AD)21 11/32

21 11/32

19 5/32

19 5/32

25 1/4

EP(AU)11 5/8

11 5/8

10 11/16

10 11/16

14 1/4

N/AN/AN/AN/A

24 29/32

DUCTLOCATION

F

DRAINLOCATION

G22 1/2

22 1/2

24 1/8

24 1/8

30 1/8

12 1/2

16 1/2

12 1/2

16 1/2

16 1/8

X

MEDIADIMENSION

Y44 3/4

44 3/4

484860

36 5/8

36 5/8

46 3/8

46 3/8

51 5/8

WETMODULE

J18 1/2

22 1/2

18 1/2

22 1/2

22 1/2

L

WATERSERVICE

M5 7/8

5 7/8

5 7/8

5 7/8

5 7/8

14 5/8

18 5/8

14 5/8

18 5/8

18 5/8

S

ELECTRICSERVICE

T39 7/8

43 7/8

41 1/2

45 1/2

51 5/8

5 5/32

5 5/32

5 5/32

5 5/32

5 5/32

N23 1/4

27 1/4

23 1/4

27 1/4

27 1/4

Q

SKIDLOCATIONS

R4 3/4

4 3/4

4 3/4

4 3/4

4 3/4

42425252

57 1/4

DIMENSIONAL DATA*

SIZING TABLES

SHEAVE SELECTION



2791012 11 6 5 4 3 1

OUTDOOR WET-BULB


85

95

105

115

OUTDOORDRY BULB

TEMP. OUTDOOR WET-BULB OUTDOOR WET-BULB

Performance shown is for installation type B - Free inlet, Ducted outlet. Power rating (BHP) does not include drive losses. Models AS/AD 15012 include the affects of a 12 inch thick evaporative media on the inlet. determined from the SPECIFICATION table above, use this information to select the proper pulley-belt kit from the SHEAVE SELECTION table below.

RPMCFM RPMRPMCFMCFM

ASMODEL

BELTAD

MODELBELT

OPER.WGT. CFM

MAXB.H.P.


0.8"CFM RPM

0.9"CFM RPM

1.0"CFM RPM

0.7"CFM

24/13.2-127.5-6.8/3.4

10.6-9.6/4.816.7-15.2/7.6

24.2-22/11

7/87/81 1/81 1/81 3/8

13333

115/208-230208-230/460208-230/460208-230/460208-230/460

H.P.VOLTS

BLOWER MOTORSSPEED

11111

49448387121

110460110464-9110465-9110466-9110470-9

2235

7 1/2

PHASE MOTORAMPS*

SHAFTDIA.

MOTORWGT(LB)

MOTORPART NO.


WATTS7377



VOLTS115230

AMPS1.0

0.58

8325381381437493

333390390446502

316373373429485

308364364420476

D8400D8450D8450D8550D8600

B96B96B100B100B101

ASMODEL

BELTB90B90B92B93B95

ADMODEL

BELT7/87/8

1 1/81 1/81 3/8

MAUREYSHEAVE

MOTORH.P.


2235

7-1/2

291347347403459

299356356412468

342398398454510

350407407463519

359415415471527

367424424480536

376432432488544

384441441497553

3DI-503DI-523DI-563DI-603DI-65

SHEAVEBORE


KIT NO.3DI-703DI-723DI-753DI-803DI-86


KIT NO.


Pumps - 2 Required.

OUTDOOR WET-BULB

10482122251474917060

324365427484

314356419477

10905126041508417360

B90B92B93B95

B96B100B100B101

967980996

1032

235

7-1/2

11375130201543817672

303346410470

10079118651443416777

335375435491

9678115141413316505

346384443498

9265111651383816242

356393450505

8830108071354015983

368403458512

7867100581289915463

394423474526

732596511264015207

409433482532

675392201232814947

426445490539

8366104401324615724

380413466519

757612772578377949

656725683769497061

5558375949––––

757610772078307940

656720683069407051

5558305940––––

7576

8771577237830

656715672368306938

5557235830

––––

11375 / 0 9265 / .5 6753 / 1.02 H.P. MOTOR / CFM-SP*

757614772878427956

656728684269567070

5558425956––––

757612772478367948

656724683669487060

5558365948––––

757610772078307940

656720683069407050

5558305940––––

13020 / 0 11165 / .5 9220 / 1.03 H.P. MOTOR / CFM-SP*

757616773378498066

656733684970667182

5558496066––––

757615773078457959

656730684569597074

5558455959––––

757613772778407953

656727684069537067

5558405953

––––

15438 / 0 13838 / .5 12328 / 1.05 H.P. MOTOR / CFM-SP*

757617773379508067

656733695070677183

5559506067––––

757617773379528069

656735695270697187

5559526069

––––

757616773278488064

656732684870647180

5558486064––––

17672 / 0 16242 / .5 14947 / 1.07-1/2 H.P. MOTOR / CFM-SP*

When the Cooler Model No, Motor H.P., & Blower Speed are

Q

D

E

E

A

F

G

X

D

S

QD

C

R

C

N

B

A

E E

N

T

W

H

UBPW

J

L

Y

M

J


SASOUTLET



D4545

48 1/4

48 1/4

H100W

10012W150W

15012W

WETMODULENUMBER


BLOWERMODEL

NUMBERCABINET

W44445454

63 3/8

67 3/8

66 5/8

70 5/8

C(SAS)13 19/32

13 19/32

16 13/16

16 13/16

A

DUCTOPENING

B21 3/4

21 3/4

26 7/8

26 7/8

21 3/4

21 3/4

26 7/8

26 7/8

U(SAD)21 11/32

21 11/32

19 5/32

19 5/32

EP(SAD)11 5/8

11 5/8

10 11/16

10 11/16

1 29/32

1 29/32

2 7/32

2 7/32

DUCTLOCATION

F

DRAINLOCATION

G22 1/2

22 1/2

24 1/8

24 1/8

12 1/2

16 1/2

12 1/2

16 1/2

X

MEDIADIMENSION

Y44 3/4

44 3/4

4848

36 5/8

36 5/8

46 3/8

46 3/8

WETMODULE

J18 1/2

22 1/2

18 1/2

22 1/2

L

WATERSERVICE

M5 7/8

5 7/8

5 7/8

5 7/8

14 5/8

18 5/8

14 5/8

18 5/8

S

ELECTRICSERVICE

T21 1/2

21 1/2

23 1/8

23 1/8

5 5/32

5 5/32

5 5/32

5 5/32

N4 3/4

4 3/4

4 3/4

4 3/4

Q

SKIDLOCATIONS

R4 3/4

4 3/4

4 3/4

4 3/4

42425252

DIMENSIONAL DATA*

SIZING TABLES

SHEAVE SELECTION



2791012 11 6 5 4 3 1

OUTDOOR WET-BULB


85

95

105

115

OUTDOORDRY BULB


Performance shown is for installation type B - Free inlet, Ducted outlet. Power rating (BHP) does not include drive losses. Models SAS/SAD 15012 include the affects of a 12 inch thick evaporative media on the inlet. ., & Blower Speed are determined from the SPECIFICATION table above, use this information to select the proper pulley-belt kit from the SHEAVE SELECTION table below.

RPMCFM RPMRPMCFMCFM

SASMODEL

BELTSAD

MODELBELT

OPER.WGT. CFM

MAXB.H.P.


0.8"CFM RPM

0.9"CFM RPM

1.0"CFM RPM

0.7"CFM

13.8/7.6-6.96.9

3.5-3.2/1.616/8

84.6-4.2/2.120/11-106.6-6/3

5/85/85/85/85/87/87/87/8

11311313

115/208-230230

208-230/460115/230

230208-230/460115/208-230208-230/460

H.P.VOLTS

BLOWER MOTORSSPEED

12112111

2429202829344140

110455110456110461110457110458

110462-9110459

110463-9

3/43/43/4111

1 1/21 1/2

PHASE MOTORAMPS*

SHAFTDIA.

MOTORWGT(LB)

MOTORPART NO.

24/13.2-127.5-6.8/3.410.6-9.6/4.8

7/87/81 1/8

133

115/208-230208-230/460208-230/460

H.P.VOLTS

BLOWER MOTORSSPEED

111

494483

110460110464-9110465-9

223

PHASE MOTORAMPS*

SHAFTDIA.

MOTORWGT(LB)

MOTORPART NO.


WATTS7377



VOLTS115230

AMPS1.0

0.58

8287381287381437437

296390296390446446

278373278373429429

269364269364420420

8350K8450K8350

8450K85508550

B96B96B96B96B96B100

SASMODEL

BELTB90B90B90B90B90B92

SADMODEL

BELT5/8*5/8*7/8*7/8*

7/81 1/8

MAUREYSHEAVE

MOTORH.P.


3/4, 13/4, 1

11, 1 1/2, 21 1/2, 2

3

253347253347403403

261356261356412412

304398304398454454

313407313407463463

321415321415471471

330424330424480480

338432338432488488

347441347441497497

3DI-1303DI-1353DI-1403DI-1453DI-1553DI-161

SHEAVEBORE


KIT NO.3DI-1653DI-1703DI-1753DI-1803DI-1853DI-190


KIT NO.



Pumps - 1 Required.

OUTDOOR WET-BULB OUTDOOR WET-BULB

6087687680919044N/A

289314353386N/A

278303345378N/A

6539728684559375N/A

B90B90B90B90B92

B96B96B96B96B100

645649665669681

3/41

1 1/223

699777028817N/AN/A

267294336N/AN/A

5603645077348719N/A

301324363394N/A

5051599473598389N/A

315336372402N/A

4415547769618043N/A

332349382411N/A

37174893652576839377

353364393420466

24973637552768698751

398404419440482

20133085497664168407

419425435452490

15712609442559328046

436444453465499

30584260605072939070

376383405430474

75768

771578237930

656715682369307038

5558235930––––

7576

4771078147919

65679

681469197024

5558135919––––

7576

276

476

576

7

65664

665

667

679

55565

567––––

6997 / 0 4415 / .5 1571 / 1.03/4 H.P. MOTOR / CFM-SP*

75768

771678258033

656716682570337141

5558256033––––

75766

771278187924

656712681869247030

5558185924––––

75763

766

789

7812

65666

679

68126815

5557

95812

––––

7702 / 0 5477 / .5 2609 / 1.01 H.P. MOTOR / CFM-SP*

75769

771979288037

656719692870377147

5559286037

––––

75767

771578227930

656715682269307037

5558225930

––––

75765

771078157919

656710681569197024

5558155919

––––

8817 / 0 6961 / .5 4425 / 1.01-1/2 H.P. MOTOR / CFM-SP*

757610772079308041

656720693070417151

5559306041

––––

7576

9771778268034

656717682670347143

5558266034––––

75766

771378197926

656713681969267032

5558195926––––

9375 / .1 8043 / .5 5932 / 1.02 H.P. MOTOR / CFM-SP*

75––––––––

65––––––––

55––––––––

757610772079308041

656720693070417151

5559306041

––––

7576

9771778268034

656717682670347143

5558266034––––

9377 / .6 8046 / 1.03 H.P. MOTOR / CFM-SP*

When the Cooler Model No, Motor H.P

AD OUTLETEE A

Q

XD

G

F

GD

S

QW

R

C

J JN

P

B

B

AL

MME E

N

Y

L

P

D

H

UB

T

AD OUTLET

C


AS OUTLET

AU OUTLET


D4545

48 1/4

48 1/4

60 1/4

H100W

10012W150W

15012W20012W

WETMODULENUMBER


BLOWERMODEL

NUMBERCABINET

W44445454

59 1/4

8290

85 1/4

93 1/4

105 1/4

C(AS)13 19/32

13 19/32

16 13/16

16 13/16

18 11/16

A

DUCTOPENING

B21 3/4

21 3/4

26 7/8

26 7/8

31 3/4

21 3/4

21 3/4

26 7/8

26 7/8

31 3/4

U(AD)21 11/32

21 11/32

19 5/32

19 5/32

25 1/4

EP(AU)11 5/8

11 5/8

10 11/16

10 11/16

14 1/4

N/AN/AN/AN/A

24 29/32

DUCTLOCATION

F

DRAINLOCATION

G22 1/2

22 1/2

24 1/8

24 1/8

30 1/8

12 1/2

16 1/2

12 1/2

16 1/2

16 1/8

X

MEDIADIMENSION

Y44 3/4

44 3/4

484860

36 5/8

36 5/8

46 3/8

46 3/8

51 5/8

WETMODULE

J18 1/2

22 1/2

18 1/2

22 1/2

22 1/2

L

WATERSERVICE

M5 7/8

5 7/8

5 7/8

5 7/8

5 7/8

14 5/8

18 5/8

14 5/8

18 5/8

18 5/8

S

ELECTRICSERVICE

T39 7/8

43 7/8

41 1/2

45 1/2

51 5/8

5 5/32

5 5/32

5 5/32

5 5/32

5 5/32

N23 1/4

27 1/4

23 1/4

27 1/4

27 1/4

Q

SKIDLOCATIONS

R4 3/4

4 3/4

4 3/4

4 3/4

4 3/4

42425252

57 1/4

DIMENSIONAL DATA*

SIZING TABLES

SHEAVE SELECTION



24 1/25 1/267 6 1/2 4 3 1/2 3 2 1/2

OUTDOOR WET-BULB


85

95

105

115

OUTDOORDRY BULB


Performance shown is for installation type B - Free inlet, Ducted outlet. Power rating (BHP) does not include drive losses. Models AS/AD/AU 20012 include the affects of a 12 inch thick evaporative media on the inlet. .P., & Blower Speed are determined from the SPECIFICATION table above, use this information to select the proper pulley-belt kit from the SHEAVE SELECTION table below.

RPMAU

BELTB92B92B93B93

CFM RPMRPMCFMCFMAS

BELTAD

BELTOPER.WGT. CFM

MAXB.H.P.


0.8"CFM RPM

0.9"CFM RPM

1.0"CFM RPM

0.7"CFM

9.6/4.815.2/7.6

22/1128/14

1 1/81 1/81 3/81 3/8

3333

230/460230/460230/460230/460

H.P.VOLTS

BLOWER MOTORSSPEED

1111

8387121138

110465-9110466-9110470-9110482-9

35

7 1/210

PHASE MOTORAMPS*

SHAFTDIA.

MOTORWGT(LB)

MOTORPART NO.


WATTS7377



VOLTS115230

AMPS1.00.58

5291328392441

300338403450

281319381431

272310369422

D8350D8400D8450D8550

B92B92B93B93

AUMODEL

BELTB112B112B112B112

ASMODEL

BELTB100B100B103B103

ADMODEL

BELT1 1/81 1/81 3/81 3/8

MAUREYSHEAVE

MOTORH.P.

BLOWER RPM/TURNS OPEN OF MOTOR SHEAVE

35

7-1/210

253291347403

262300358412

309347414459

319356425469

328365437478

338375448488

347384459497

3DI-1953DI-2003DI-2033DI-205

3DI-2253DI-2303DI-2333DI-235

ASPULLEY-BELT

KIT NO.SHEAVE

BOREAD

PULLEY-BELTKIT NO.

3DI-2103DI-2153DI-2183DI-220

AUPULLEY-BELT

KIT NO.

* Static Pressure (inches of water). GPH = Water consumption at design conditions but does not include bleed-off amount. Amount of bleed-off will vary with different water sources, but an amount equal to 10% of water consumption at any design condition is considered sufficient for average water.

Pumps - 2 Required.

OUTDOOR WET-BULB

15200183712127023562

292341387423

284334380417

15716188202167023929

B100B100B103B103

B112B112B112B112

1249126412971326

35

7 1/210

16267192862207724301

276327374412

14696179432088823204

300348393429

14190175182051422866

308355399434

13665170922014222528

317361405440

13110166611976922190

325368410445

11886157521901521510

346383422456

11194152721862921171

358390428461

10450147601822920823

371399435467

12521162111939521852

335375416450

757618773678547972

656736685469727090

5558545972609061

107

757615773178467962

656731684669617077

555846596160766091

757612772477367848

656724673568476959

555735584759596071

16267 / 0 13655 / .5 10450 / 1.03 H.P. MOTOR / CFM-SP*

757621774378647985

6567426864698570

106

555863598460

10661

127

757619773878577976

656738685769767095

5558565975609461

113

757617773378507966

656733684969667082

555849596660826198

19286 / 0 17092 / .5 14760 / 1.05 H.P. MOTOR / CFM-SP*

757624774978737997

6567486872699771

121

555872599661

12062

144

757622774578677989

6567446867698970

111

555866598860

11061

133

757620774178617981

6567406861698170

101

555860598060

10061

121

22077 / 0 20142 / .5 18229 / 1.07-1/2 H.P. MOTOR / CFM-SP*

7576277753788079

107

656753688069

10671

133

55587959

10661

13262

159

757625775078747999

6567496874699971

123

555874599861

12362

147

757623774678697992

6567466869699270

115

555868599160

11461

137

24301 / 0 22528 / .5 20823 / 1.010 H.P. MOTOR / CFM-SP*

When the Cooler Model No, Motor H

This warranty is extended to the original purchaser of an evaporative cooler installed and used undernormal conditions. It does not cover damages incurred from accident, neglect, or abuse by the owner. Champion Cooler does not authorize any person or representative to assume for the Corporation anyother or different liability in connection with this product.

TERMS & CONDITIONS OF WARRANTYThis warranty includes lifetime limited coverage on water reservoir against any leakage due to defectsin material. From date of installation, if any original component part provided by Champion Cooler fails due to defect in material or factory workmanship only, Champion Cooler will provide the replacementparts as follows: • Cabinet components for one year from date of installation • Evaporative media for two years from date of installation

EXCLUSIONS TO THIS WARRANTY• Champion Cooler is not responsible for any incidental or consequential damage resulting from any malfunction.• Champion Cooler is not responsible for any damage received from the use of water softeners, chemicals, descaling material, plastic wrap, or if a motor of a higher horsepower than what is shown on the serial plate is used in the unit.• Champion Cooler is not responsible for the cost of service calls to diagnose cause of trouble, or labor charge to repair and/or replace parts.

HOW TO OBTAIN SERVICE UNDER THIS WARRANTYContact the Dealer where you purchased the evaporative cooler. If for any reason you are not satisfiedwith the response from the Dealer, write or call: Customer Service Department, Champion Cooler, 5800 Murray Street, Little Rock, AR 72209, 800-643-8341 or e-mail Champion at: [email protected].

This limited warranty applies to the original purchaser only.

CHAMPION COOLER certifies that the evaporative air coolers shown here are licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordancewith AMCA Publication 211 and comply with the requirements of the Certified Ratings Program.

The New MasterCool® by Champion Cooler, 5800 Murray, Little Rock, AR 72209 800 643-8341 www.championcooler.com

LIMITED WARRANTY

CSGB -MARCH 2009

Crafted with Pride in the USA

Date post:	13-Jan-2022
Category:	Documents
Upload:	others
View:	2 times
Download:	0 times

Industrial/Commercial Evaporative Coolers Specification Guide

Documents