Industry Segment Profi leSolar Power Generation
Solar Power GenerationGrowing concerns about energy availability have increased consumer and government interest in solar power as a viable alternative to traditional power sources. In fact, large concentrated solar power plants are capable of creating the thermal energy equivalent to conventional fossil fuel power plants.
Due to the high up-front capital investment required for solar energy plants, the levelized cost of electricity (LCOE) is typically higher for solar power than for more traditional forms of power generation like coal and gas. But by working with a trusted automation vendor, solar power developers can begin producing power more quickly, and operate and maintain the site more effi ciently, helping to reduce the LCOE and make solar power generation a more cost-eff ective alternative.
Rockwell Automation off ers solar power generators a complete automation solution with lower overall lifecycle costs when compared to traditional DCS off erings. The fl exibility, scalability and multidisciplined capabilities of an open control architecture from Rockwell Automation, allow developers to leverage a single-vendor solution from the solar fi eld throughout the entire process of solar electricity generation.
In addition, Rockwell Automation and our network of partners off er best-in-class service and support worldwide. The company is committed to working collaboratively with solar developers to reduce the cost and increase the viability of solar power generation.
CapabilitiesProgrammable Controllers:
CompactLogix™ PAC (Bulletin 1769) •
ControlLogix® PAC (1756)•
MicroLogix™ 1400 PLC (1766)•
Process Control:
PlantPAx™ Process Automation System•
Data Management:
FactoryTalk® Historian software (9518)•
FactoryTalk View SE software (9701)•
Power ControlPowerFlex® low and medium • voltage drives
CENTERLINE® MCCs with • IntelliCENTER® Technology (2100 & 2500)
Condition Monitoring:
Turbine supervisory instrumentation •
XM® vibration monitoring solutions•
Emonitor® Software (9309)•
Networks and Communication:
CIP Sync technology•
Stratix Ethernet Switches (1783)•
Safety:
GuardLogix programmable safety • controllers (1756)
Guard I/O modules (1734, 1791)•
Services and Support:
NERC CIP compliance consulting services•
On-site and remote training and support•
Rockwell Automation distributor • network
Network Services•
Engineering Services•
Publication PSEF-AP003-EN-P – January, 2011 Copyright © 2011 Rockwell Automation, Inc. All Rights Reserved. Printed in USA.
Solar Steam Generator
Solar Pre-heater
Deaerator
FeedwaterPump
Solar Re-heater
Expansion Tank
Cold Salt Tank
Hot Salt Tank
MoltenSalt
Pump
MoltenSalt
Pump
Molten Salt Storage
HTF Pump
Salt / HTFHeat
Exchanger
Cold Pipe Header
Hot Pipe Header
Solar Field Thermal Storage Power Block
Solar Superheater
SubstationGenerator
Transmission
Low PressurePre-Heater
CondensatePump
Steam Turbine
Condenser Collector Field
CoolingTowersCooling
Water Pump
HPTurbine
LPTurbine
Control Room
1 Solar Field: MicroLogix controllers accurately position the mirrors leveraging code based on the National Renewable Energy Laboratory algorithm. ControlLogix PACs manage the MicroLogix controllers using a fast, effi cient EtherNet/IP network solution.
2 Power Plant Control Room: The PlantPAx process automation system controls both thermal storage and power block operations in a single, fully integrated control and information platform. FactoryTalk View SE provides a view into the process while FactoryTalk Historian software gathers process data from the entire plant. Our alliance with Cisco off ers solar power generators tighter integration between the control and network infrastructure, resulting in the deployment of high availability architectures with improved system wide visibility.
3 Power Block/Thermal Storage: Plant systems including Balance of Plant (BOP) equipment can utilize pre-engineered application code and faceplates to integrate process instrumentation solutions from Rockwell Automation partner Endress+Hauser. By leveraging a CompactLogix PAC, BOP systems can seamlessly integrate with the PlantPAx system without requiring an OPC server, tag mapping or protocol conversions. CENTERLINE motor control centers with IntelliCENTER technology supplies real-time data to the PlantPAx system and provides quick access to predictive failure information.
4 Pump Skids: PowerFlex drives are used throughout the plant on molten salt pumps, heat transfer fl uid pumps, condensate pumps and feed water pumps. Dynamix™ integrated condition monitoring solutions leverage XM Series modules and Emonitor software for real-time measuring and tracking of critical parameters including vibration, temperature and speed.
5 Steam Turbine: A Powermonitor™ and Combination Generator Control module control the excitation of the generator and provide data to synchronize it to the utility grid. In the event of abnormal operations, a turbine shutdown system using GuardLogix controllers and Guard I/O can allow for safer system stoppage.
Global Services and Solutions: Rockwell Automation Network and Security Services can provide services to design, implement and manage industrial control, and information networks. Stratix switches can provide the high performance and high availability required to optimize plant operations. This team also provides security technology– including NERC CIP consulting services – to ensure the system meets power generation standards.
High-volume panel building services help simplify equipment integration processes and ease on-site installation. Engineering resources can provide support and commissioning assistance.
1
2
3
5
CENTERLINE, CompactLogix, ControlLogix, Dynamix, Emonitor, Factory Talk, Guard I/O, GuardLogix, IntelliCENTER, MicroLogix, PlantPAx, PowerFlex, Powermonitor and XM are trademarks of Rockwell Automation, Inc.Trademarks not belonging to Rockwell Automation are property of their respective companies.
3
4
4 4
Introduction_Catagory Types
This tab summarizes Rockwell Automation Global Sales and Marketing preferred printing standards. It also provides guidance on whether a publication should be released as JIT (print on demand) or if it requires an RFQ for offset printing.Find your publication type in the first section below. Use the assigned Printing Category information to determine the standard print specifications for that document type. The Printing Categories are defined below the Publication Type section. Note there may be slightly different print specifications for the categories, depending on the region (EMEA or Americas).For more information on Global Sales and Marketing Printing Standards, see publication RA-CO004 in DocMan.
Publication Type and Print Category
Publication TypeOff Set Print Category Spec. (See table below)JIT Spec. (See table below)DescriptionOrder Min **Order Max **Life Cycle Usage / Release Option
ADNA - PuttmanNAAdvertisement Reprint ColourNANAPresale / Internal
APA3D2Application Solution or Customer Success Story5100Presale / External
ARNANAArticle/Editorial/BylineNANAPresale / Internal
(press releases should not be checked into DocMan or printed)
ATB3, B4D5Application techniques5100Presale / External
BRA2 Primary, A1NABrochures5100Presale / External
CAC2 Primary, C1NACatalogue150Presale / External
CGNANACatalogue Guide150Presale / External
CLNANACollection550Presale / External
COA5, A6, A9D5Company Confidential InformationNANANA / Confidential
CPE-onlyE-only, D5Competitive Information550NA / Confidential
DCE-onlyE-onlyDiscount SchedulesNANAPresale / Internal
DIA1, A3NADirect Mail5100Presale / Internal
DMNANAProduct Demo550Presale / Internal
DSB3D5Dimensions Sheet15Post / External
DUB3D5Document Update15Post / External
GRB2D6Getting Results15Post / External
INB3 Primary, B2D5, D6Installation instructions15Post / External
LMNANALaunch Materials550Presale / Internal
PCB3D5Packaging Contents
PLE-only primary, B3E-onlyPrice List550Presale / Internal
PMB2D6Programming Manual15Post / External
PPA3D1Profile (Single Product or Service). NOTE: Application Solutions are to be assigned the AP pub type.5100Presale / External
QRB2 primary, B3, B5D5, D6Quick Reference15Post / External
QSB2 primary, B3, B5D5, D6Quick Start15Post / External
RMB2D5, D6Reference Manual15Post / External
RNB3D5Release Notes15Post / External
SGB1 Primary, B4D5, D6Selection Guide Colour550Presale / External
SGB2D5, D6Selection Guide B/W550Presale / External
SPA1, A2, A3, A4NASales Promotion NOTE: Service profiles are to be assigned the PP pub type.5100Presale / Internal
SRB2, B3D5, D6Specification Rating Sheet5100Presale / External
TDB2 Primary B3, B4, B5D5, D6Technical Data550Presale / External
TGB2, B3D6Troubleshooting Guide15Post / External
UMB2 Primary, B4D6User Manual B/W15Post / External
WDB3D5Wiring Diagrams / Dwgs15Post / Internal
WPB3 Primary, B5D5White Paper550Presale / External
** Minimum order quantities on all JIT items are based on the publication length. **
Publication lengthMinimum Order Quantity
77 or more pages1 (no shrink wrap required)
33 to 76 pages25
3 to 32 pages50
1 or 2 pages100
Pre-sale / MarketingAll paper in this category is White Brightness, 90% or better. Opacity 90% or better
CategoryColor OptionsAP, EMEA Paper RequirementsCanada, LA, US Paper Requirements
A14 color170 gsm 2pp100# gloss cover, 100# gloss text
A24 color170 gsm , folded, 4pp100# gloss cover, 80# gloss text
A34 colorCover 170 gsm with Body 120 gsm, > 4pp80# gloss cover, 80# gloss text
A42 color170gsm Silk – 120gsm Silk80# gloss cover, 80# gloss text
A52 color170gsm Silk – 120gsm Silk80# gloss cover, 80# matt sheet text
A61 color170gsm Silk – 120gsm Silk80# gloss cover, 80# matt sheet text
A74 color cover2 color textSelection GuideCategory being deleted10 Point Cover C2S50# matte sheet text
A84 color coverCategory being deleted50# matte sheet text, self cover
2 color text
Selection Guide
A92 color100gsm bond50# matte sheet text, self cover
Selection Guide
Gray shading indicates Obsolete Print Catagories
Post Sale / Technical Communication
CategoryColor OptionsAP, EMEA Paper RequirementsCanada, LA, US Paper Requirements
B14 color cover270gsm Gloss 100gsm bond10 Point Cover C2S
2 color text50# matte sheet text
B21 color160gsm Colortech & 100gsm Bond90# Cover50# matte sheet text
B31 color100gsm bond50# matte sheet text, self cover
B42 color160gsm Colortech & 100gsm Bond90# Cover50# matte sheet text
B52 color100gsm bond50# matte sheet text, self cover
Catalogs
CategoryColor OptionsAP, EMEA Paper RequirementsCanada, LA, US Paper Requirements
C14 color cover270gsm Gloss 90gsm silk10 Point Cover C2S
4 color text45# Coated Sheet
C24 color cover270gsm Gloss 80gsm silk10 Point Cover C2S
2 color text32#-33# Coated Sheet
JIT / PODAll paper in this category is White Brightness, 82% or better. Opacity 88% or better
CategoryColor OptionsAP, EMEA Paper RequirementsCanada, LA, US Paper Requirements
D14 color170gsm white silk80# gloss cover, coated 2 sides
D24 color120gsm white silk80# gloss text, coated 2 sides, self cover
D34 colorCover 170gsm with Body 120gsm80# gloss cover, 80# gloss text coated 2 sides
D41 color160gsm tab90# index
D51 color80gsm bond20# bond, self cover
D61 colorCover 160gsm tab with Body 80gsm bond90# index, 20# bond
D72 color160gsm tab90# index
D82 color80gsm bond20# bond, self cover
D92 colorCover 160gsm tab with Body 80gsm bond90# index, 20# bond
D10Combination: 4 color cover, with 2 color bodyCover 160gsm with Body 80gsm90# index, 20# bond
Gray shading indicates Obsolete Print Catagories
Just In Time (JIT) or Off Set (OS)?
Use these guidelines to determine if your publication should be JIT (just in time/print on demand) or if it would be more economical to print OS (offset/on a press). OS print jobs require an RFQ (Request For Quote) in US. If your job fits into the “Either” category, an RFQ is recommended, but not required. In the US, RA Strategic Sourcing will discourage or reject RFQs for jobs that fall within the JIT category. Guidelines differ for black & white and color printing, so be sure to check the correct tables.
Black & White Printing
Color Printing
Color Printing
Print Spec Sheet
JIT Printing SpecificationsRA-QR005G-EN-P - 3/29/2010
Printing SpecificationYOUR DATA HEREInstructionsNO
(required) Category:JIT / PODSelect Print Category A,B,C or D from category list, on "Introduction_Catagory Types" tab11” x 17”LOOSE -Loose LeafYESPre-sale / MarketingTOP
(required) Finished Trim Size Width:8.5” x 11”8.5” x 11”PERFECT - Perfect BoundA1LEFT
(required) Publication Number :PSEF-AP003A-EN-PSample: 2030-SP001B-EN-P3” x 5”SADDLE - Saddle StitchA2RIGHTCORNER
Use Legacy NumberNOYES or NO18” x 24” PosterPLASTCOIL - Plastic Coil (Coil Bound)A4BOTTOMSIDE
Legacy Number if applicable:Sample Legacy Number: 0160-5.3324” x 36” PosterSTAPLED1 -1 positionA3
Publication Title:Solar Power Generation Industry Segment ProfileSample: ElectroGuard Selling Brief80 character limit - must match DocMan Title36” x 24” PosterSTAPLED1B - bottom 1 positionA5
(required) Business Group:Marketing CommercialAs entered in DocMan4” x 6”STAPLED2 - 2 positionsA6
(required) Cost Center:19025As entered in DocMan - enter number only, no description. Example - 19021CMKMKE CM Integrated Arch - 19021CMKMKE Market Access Program - 191054.75” x 7” (slightly smaller half-size)THERMAL - Thermal bound (Tape bound)A7
Binding/Stitching:LOOSE -Loose LeafReview key on right...Saddle-Stitch Items All page quantities must be divisible by 4.Note: Stitching is implied for Saddle-Stitch - no need to specify in Stitching Location.80 pgs max. on 20# (text and cover)76 pgs max. on 20# (text) and 24# (cover)72 pgs max. on 24# (text and cover)
Perfect Bound Items940 pgs max. w/cover (90# index unless indicated otherwise)70 pgs. min. for spine without words200 pgs min. for spine with words
Plastcoil Bound Items530 pgs max. of 20# (if adding cover deduct equivalent number of pages to equal cover thickness) (90# index unless indicated otherwise)
Tape Bound Items250 pgs max. on 20# no cover240 pgs max. w/cover (90# index unless indicated otherwise)4.75” x 7.75”THERMALO - Thermal Bound (Tape bound - offline)A8
(required) Page Count of Publication:2Total page count including cover5.5” x 8.5” (half-size)A9
Paper Stock Color:White is assumed. For color options contact your vendor.6” x 4”Post Sale / Technical Communication
Number of Tabs Needed:5 tab in stock at RR Donnelley7.385” x 9” (RSI Std)B1
Stitching Location:Blank, Corner or Side8.25” x 10.875”B2
Drill Hole YES/NONOAll drilled publications use the 5-hole standard, 5/16 inch-size hole and a minimum of ¼ inch from the inner page border.8.25” x 11” (RA product profile std)B3None
Glue Location on Pad:Glue location on pads8.375” x 10.875B4Half or V or Single Fold
Number of Pages per Pad:Average sheets of paper.. 25, 50 75,100 Max9” x 12” (Folder)B5C or Tri-Fold
Ink ColorCMYKOne color assumes BLACK / 4 color assume CMYK / Indicate PMS number here…A4 (8 ¼” x 11 ¾”) (210 x 297 mm)CatalogsDbleParll
Used in Manufacturing:A5 (5.83” x 8.26”) (148 x 210 mm)C1Sample
Fold:Review key on right...Short (must specify dimensions between folds in Comments)
Comments:C2Z or Accordian Fold
Part Number:JIT / PODMicrofold or French Fold - designate no. of folds in Comments - intended for single sheet only to be put in box for manufacturing
D1Double Gate
D2
FoldsHalf, V, Single C or Tri
Dble Parll
Z or Accordian Microfold or French
Double Gate
Short FoldD3
D4
D5
D6
D7
D8
D9
MBD000CCD74.bin
MBD000D141F.bin
MBD000E357A.bin
MBD000D05AE.bin
MBD000B37AA.bin
MBD000C2CF0.bin
MBD000CBFEF.bin
MBD000B71E5.bin
MBD000AB9B4.bin
MBD000AF7AA.bin
/ColorImageDict > /JPEG2000ColorACSImageDict > /JPEG2000ColorImageDict > /AntiAliasGrayImages false /CropGrayImages true /GrayImageMinResolution 300 /GrayImageMinResolutionPolicy /OK /DownsampleGrayImages true /GrayImageDownsampleType /Average /GrayImageResolution 300 /GrayImageDepth 8 /GrayImageMinDownsampleDepth 2 /GrayImageDownsampleThreshold 2.00000 /EncodeGrayImages true /GrayImageFilter /FlateEncode /AutoFilterGrayImages false /GrayImageAutoFilterStrategy /JPEG /GrayACSImageDict > /GrayImageDict > /JPEG2000GrayACSImageDict > /JPEG2000GrayImageDict > /AntiAliasMonoImages false /CropMonoImages true /MonoImageMinResolution 1200 /MonoImageMinResolutionPolicy /OK /DownsampleMonoImages true /MonoImageDownsampleType /Average /MonoImageResolution 1200 /MonoImageDepth -1 /MonoImageDownsampleThreshold 1.50000 /EncodeMonoImages true /MonoImageFilter /CCITTFaxEncode /MonoImageDict > /AllowPSXObjects false /CheckCompliance [ /None ] /PDFX1aCheck false /PDFX3Check false /PDFXCompliantPDFOnly false /PDFXNoTrimBoxError true /PDFXTrimBoxToMediaBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXSetBleedBoxToMediaBox true /PDFXBleedBoxToTrimBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXOutputIntentProfile (None) /PDFXOutputConditionIdentifier () /PDFXOutputCondition () /PDFXRegistryName () /PDFXTrapped /False
/CreateJDFFile false /Description > /Namespace [ (Adobe) (Common) (1.0) ] /OtherNamespaces [ > /FormElements false /GenerateStructure true /IncludeBookmarks false /IncludeHyperlinks false /IncludeInteractive false /IncludeLayers false /IncludeProfiles true /MultimediaHandling /UseObjectSettings /Namespace [ (Adobe) (CreativeSuite) (2.0) ] /PDFXOutputIntentProfileSelector /NA /PreserveEditing true /UntaggedCMYKHandling /LeaveUntagged /UntaggedRGBHandling /LeaveUntagged /UseDocumentBleed false >> ]>> setdistillerparams> setpagedevice