IndustryPack® Modules - Bentech...

IndustryPack® Modules

Data Sheets of TEWS’ IP Modules and Carrier

TEWS TECHNOLOGIES GmbH Am Bahnhof 7 25469 Halstenbek, Germany

Phone: +49 (0) 4101 4058 0 Fax: +49 (0) 4101 4058 19 e-mail: [email protected] www.tews.com

http://www.tews.com/http://www.tews.com/

About TEWS TECHNOLOGIES TEWS TECHNOLOGIES is a leading solutions provider of embedded I/O and CPU products based on open architecture standards such as PMC, IndustryPack® (IP), CompactPCI, standard PCI, VME, and AMC. TEWS has more than 30 years of experience designing and building turn-key embedded interface solutions using the philosophy to listen and respond to our customers’ needs. Using this ‘customer first’ approach, TEWS has developed a large number of standard and custom products for applications in industrial control, telecommunication infrastructure, medical equipment, traffic control and COTS. TEWS’ line of embedded I/O solutions is available worldwide through a global network of distributors.

Quality Assurance / Warranty TEWS operates three subsidiaries to meet global demand for pre and post sales support, reduced development time, long term product availability, and complete product lifecycle management. TEWS is committed to continuously improving the quality of our products and services. As a reflection of our commitment to quality, TEWS has implemented and received ISO9001:2008 certification. All TEWS’ products feature a five-year limited warranty.

mailto:[email protected]:[email protected]

RoHS / WEEE Compliance TEWS TECHNOLOGIES believes in conducting business in a manner that respects the environment and consequently has embraced the RoHS regulations of the European Community. TEWS now produces RoHS-compliant versions of our products, provided all required components are available RoHS-compliant. Products which do not have RoHS-compliant components available may be redesigned to meet the regulations on a case-by-case basis. Redesigned product will match the original product in form, fit and/or function whenever possible. Non-compliant products will continue to be available for all applications which are exempt from the RoHS directives and have a continuing requirement for leaded solder. More information regarding RoHS compliance is available on the specific product pages at www.tews.com.

Software support Software support is a critical and defining component of the TEWS’ I/O product offering. Our modular hardware designs are coupled with extensive software drivers and support for most major real-time and server operating systems such as VxWorks, Windows XP/XPE/2000, Integrity, Linux, LynxOS, and QNX. Supported CPU architectures are Intel, PowerPC and 68k (for IndustryPack only). For IndustryPack carriers and modules, TEWS has developed a layered driver concept that includes both a carrier driver layer and an IP module driver layer. All TEWS’ IndustryPack carriers are supported directly by the carrier driver, and a generic driver is included for integration of third party products. A key element of our software is our support staff. All TEWS’ support engineers are professionally trained to ensure in-depth support for software drivers and integration.


IndustryPack® Modules

IndustryPack, also known as IP Modules

or IPack, exist in single size (1.8" x 3.9")

and double size (3.6" x 3.9") versions.

The modules reside on carriers and

provide cost effective I/O solutions due to

their small construction and form-factor

features.

TEWS TECHNOLOGIES offers an

attractive and wide range of IP modules

for industrial process control, medical

equipment, traffic control, tele-

communication, and COTS applications.

We supply off-the-shelf software drivers

and superior support for all major

operating systems. In addition, we

provide engineering kids with detailed

manuals, schematics and data sheets for

each IP module. To help facilitate system

integration, we also offer transition

modules, cable kits and cable adapters.

Select from our wide range of TEWS

TECHNOLOGIES products for high-

speed and high-resolution A/D, D/A,

digital I/O, motion control. FPGA and

serial communication functions. Note that

nearly all TEWS modules are galvanically

isolated to protect your system.

If you wish to inquire about custom

IndustryPack designs, please contact

TEWS directly at our offices in Germany

or the United States. TEWS works

closely with OEM and government

customers to deliver accelerated time to

market, long-term product availability and

comprehensive product lifecycle

management -- from the design stage

through manufacturing, testing and

beyond to post-sales support.

In addition to our well known IP modules,

we offer a complete line of PCI, Compact

PCI, and numerous PMC modules off-

the-shelf.

All TEWS modules feature a five-year

limited warranty, and many are offered

standard in extended temperature (-40°C

to +85°C). Software drivers for VxWorks,

LynxOS, LiNUX, QNX, Integrity and

Windows XP/XPE/2000 are available. For

more information go to www.tews.com.


TEWS TECHNOLOGIES GmbH keeps the right to change technical specification wAll trademarks mentioned are property of their respective owners.

TEWS TECHNOLOGIES GmbH

The Embedded I/O Company

ithout further notice. 09/2009

Am Bahnhof 7 25469 Halstenbek, Germany Phone: +49 (0) 4101 4058 0 Fax: +49 (0) 4101 4058 19

e-mail: [email protected] www.tews.com

TIP102 Motion Controller using Incremental Encoder Application Information The TIP102 family consists of IndustryPack® compatible modules with complete one or two axes high precision motion control interfaces, using incremental encoder with RS422 or TTL signal level for position feedback. The transition module TIP102-TM-xx is required for the signal conditioning and optional galvanically isolation of the various input and output signals. The position feedback is provided by an incremental encoder interface and a 24 bit up/down counter. The level of the encoder signals can be TTL or RS422. Optionally, the encoder signals can be isolated on the transition module by high speed optocouplers. The encoder signals pass a digital filter for noise suppression before they are fed into the counter and the reference logic. The counter is programmable for single, double and quadruples analysis of the two encoder phase signals.

Calibration of the position feedback to an absolute reference point is done by programmable reference logic. Several modes of operation and hardware configurations for the reference switch and the encoder zero pulse are selectable. During normal operation the automatic recalibration of the measurement system is practicable with the “Auto-Reference” mode, whenever the system passes the reference location. Two isolated 24V DC digital inputs have limit switch functionality. Each of these inputs drives a floating optocoupler output as hardware feedback. These outputs can be used to disable the power on the motor power amplifier, dependent on the actual direction. One additional isolated 24V digital input is for free use by the software, for example as emergency stop input. A floating optical output can be controlled by software, for example as enable signal for the motor power amplifier. A 16 bit digital to analog converter (DAC) produces a +/-10V controller output signal which can be used as speed or torque source for the power amplifier of the motor drive system. A galvanically isolation of this signal with the help of an isolation amplifier will be supplied as a transition module option. A 12 bit analog to digital converter (ADC) with a configurable input voltage range is also available.

For First-Time-Buyers the Engineering Documentation TIP102-ED is recommended. The Engineering Documentation includes TIP102-DOC, schematics and data sheets of TIP102 and TIP102-TM. Software Support (TIP102-SW-xx) is available for different operating systems. Technical Information TIP102

Interface according to IndustryPack specification Identification-PROM supports auto-configuration Single Size IndustryPack 24 bit counter per axis (+/- 8.300.000 increments) • Programmable single, double or quadruples

analysis of count signals • Maximum count frequency: 2 MHz • Digital signal filter for suppression of fast noise

pulses • Any origin within driving range selectable • Auto-reference procedure

16 bit D/A converter per axis with +/- 10 V output signal to control servo amplifier

12 bit A/D converter per axis with adjustable input voltage range e.g. for connection of a joystick

4 inputs per axis for reference switch, limit switches, emergency stop

3 outputs per axis for control of axis enable and current limiting

TIP102-TM

50 pin flat cable connection to TIP102 Signal distribution by three DB connectors per axis in

a 6U / 1slot front panel Encoder interface directly to RS422 or TTL level Signal conditioning for all signals possible: • Isolation of all digital 24V I/O signals • Isolation of encoder signals • Isolation of analog output • Isolation of analog input


TEWS TECHNOLOGIES GmbH keeps the right to change technical specification without further notice. All trademarks mentioned are property of their respective owners.

09/2009



Block diagram TIP 102

Block diagram TIP102-TM-xx

Order Information

RoHS Compliant TIP102-10R One Axis Incremental Motion Controller TIP102-11R As TIP102-10R but includes run-time-

license for TIP102-SW-x2 TIP102-20R Two Axes Incremental Motion Controller TIP102-21R As TIP102-20R but includes run-time-

license for TIP102-SW-x2

None RoHS Compliant TIP102-10 None RoHS compliant version of

TIP102-10R TIP102-11 None RoHS compliant version of



TIP102-21R TIP102-TM-10 Transition Module for TIP102-1x,

provides isolation of all 24V digital I/O signals

TIP102-TM-11 As TIP102-TM-10 but add. isolation of encoder

TIP102-TM-12 As TIP102-TM-10 but add. isolation of encoder and analog output

TIP102-TM-13 As TIP102-TM-10 but add. isolation of encoder and analog input and output

TIP102-TM-20 Transition Module for TIP102-2x, provides isolation of all 24V digital I/O signals




Documentation TIP102-DOC User Manual (TIP102 and TIP102-TM) TIP102-ED Engineering Documentation, includes

TIP102-DOC

Software TIP102-SW-25 Integrity Software Support TIP102-SW-42 VxWorks Software Support (Legacy and VxBus-Enabled Software

Support) TIP102-SW-65 Windows XP/XPE/2000 Software

Support TIP102-SW-72 LynxOS Software Support TIP102-SW-82 LiNUX Software Support TIP102-SW-95 QNX 6 Software Support For other operating systems please contact TEWS.


10/2009



The Embedded I/O Company TIP111 Motion Controller using absolute Encoder (SSI) Application Information The TIP111 family are IndustryPack® compatible modules for motion control applications using absolute encoder with a serial interface (SSI) as position feedback. There are two versions available: The TIP111-1x is the implementation of a one axis controller and the TIP111-2x offers a two axes controller on a single size IP. The transition module TIP111-TM-xx is required for the signal conditioning and optional galvanically isolation of the various input and output signals.

The position feedback is provided by an absolute encoder with a synchronous serial interface (SSI) and a corresponding 32 bit shift register at the IP. The level of the encoder signals can be TTL or RS422. Optionally the encoder signals can be isolated on the transition module by high speed optocoupler. The TIP111 can handle data stream which are encoded in Binary or in Gray Code. Two isolated 24V DC digital inputs have limit switch functionality. Each of these inputs drives a floating optocoupler output as hardware feedback. These outputs can be used to disable the power on the motor power amplifier, dependent on the actual direction. Two additional isolated 24V digital inputs are for free use by the software, for example as emergency stop input. A floating optical output can be controlled by software, for example as enable signal for the motor power amplifier. A 16 bit digital to analog converter (DAC) produces a +/-10V controller output signal which can be used as speed or torque source for the power amplifier of the motor drive system. A galvanically isolation of this signal with the help of an isolation amplifier will be supplied as a transition module option. A 12 bit analog to digital converter (ADC) with a configurable input voltage range is also available.

For First-Time-Buyers the Engineering Documentation TIP111-ED is recommended. The Engineering Documentation includes TIP111-DOC, schematics and data sheets of TIP111 and TIP111-TM. Software support (TIP111-SW-xx) is available for different operating systems. Technical Information TIP111

Interface according to IndustryPack specification Identification-PROM supports auto-configuration Single Size IndustryPack Synchronous serial interface (SSI), programmable

word length up to 32 bit 16 bit D/A converter per axis with +/- 10V output

signal to control servo amplifier 12 bit A/D converter per axis with adjustable input

voltage range e.g. for connection of a joystick 4 inputs per axis for limit switches, emergency stop 3 outputs per axis for control of axis enable and

current limiting TIP111-TM

50 pin flat cable connection to TIP111 Signal distribution by three DB connectors per axis in

a 6U / 1 slot front panel Encoder interface directly to RS422 or TTL level Signal conditioning for all signals possible: • Isolation of all digital 24V I/O signals • Isolation of encoder signals • Isolation of analog output • Isolation of analog input



10/2009



Block diagram TIP111

Block diagram TIP111-TM-xx

Order Information

None RoHS Compliant TIP111-10 One Axis Absolute (SSI) Motion

Controller TIP111-11 As TIP111-10 but includes run-time-

licence for TIP111-SW-x2 TIP111-20 Two Axes Absolute (SSI) Motion

Controller TIP111-21 As TIP111-20 but includes run-time-

licence for TIP111-SW-x2 TIP111-TM-10 Transition Module for TIP111-1x,

provides isolation of all 24V digital I/O signals




TIP111-TM-20 Transition Module for TIP111-2x, provides isolation of all 24V digital I/O signals




Documentation TIP111-DOC User Manual (TIP111 and TIP111-

TM) TIP111-ED Engineering Documentation, includes

TIP111-DOC

Software TIP111-SW-25 Integrity Software Support TIP111-SW-42 VxWorks Software Support (Legacy and VxBus-Enabled

Software Support) TIP111-SW-65 Windows XP/XPE/2000 Software



11/2009



The Embedded I/O Company TIP114 10 Channel Absolute Encoder Interface (SSI) Application Information The TIP114 is an IndustryPack® compatible module for motion control applications. The TIP114 offers ten independent SSI interfaces with programmable clock rates from 1µs to 15µs and programmable data bits from 1 bit to 32 bit. The position feedback is provided by an absolute encoder with a synchronous serial interface (SSI) and a corresponding 32 bit (maximum) shift register at the IP. The level of the encoder signals is RS422. The data inputs are galvanically isolated by high speed optocouplers. Each SSI channel can handle a data stream which is encoded in Binary- or in Gray-Code, without or with parity as well as with even or odd parity.

For First-Time-Buyers the Engineering Documentation TIP114-ED is recommended. The Engineering Documentation includes TIP114-DOC, schematics and data sheets of TIP114. Software support (TIP114-SW-xx) is available for different operating systems.

Technical Information Interface according to IndustryPack specification Single Size IndustryPack 10 Channel absolute encoder interface with isolated

serial SSI inputs SSI clock rate programmable from 1µs to 15µs SSI data programmable from 1 bit to 32 bit EIA-422 encoder inputs galvanically isolated by high

speed optocouplers Operating temperature -40°C to +85°C

Order Information

RoHS Compliant TIP114-10R 10 Channel Absolute Encoder (SSI)

Interface


TIP114-10R

Documentation TIP114-DOC User Manual TIP114-ED Engineering Documentation, includes

TIP114-DOC



Support TIP114-SW-72 LynxOS Software Support TIP114-SW-82 LiNUX Software Support TIP114-SW-95 QNX 6 Software Support

For other operating systems please contact TEWS.


09/2009



The Embedded I/O Company TIP115 5 Channel SSI Interface with ‘Listen Only’ Mode Application Information The TIP115 is an IndustryPack® compatible module for motion control applications. The TIP115 offers five independent channels. Each of these channels can be operated as a standard SSI interface controller or in a ‘Listen only’ mode. The standard SSI interface controller outputs a clock burst to the absolute encoder and receives the returned positional data. The SSI interface controller operates with a programmable clock rate from 1µs to 15µs and programmable data word length from 1 bit to 32 bit. In ‘Listen only’ mode the channel listens to an existing SSI interface to observe its data transfer. It takes both the SSI clock and data as inputs. In ‘Listen only’ mode the channel also has a programmable data word length from 1 bit to 32 bit; the SSI clock rate of the observed SSI interface can be in the range of 1µs to 15µs. In both modes the data word can be encoded in Binary- or in Gray-Code and with odd, even or no parity. The data inputs are galvanically isolated by high speed optocouplers. The level of the input and output signals is RS422.

For First-Time-Buyers the Engineering Documentation TIP115-ED is recommended. The Engineering Documentation includes TIP115-DOC, schematics and data sheets of TIP115. Software Support (TIP115-SW-xx) is available for different operating systems.

Technical Information Interface according to IndustryPack specification Single Size IndustryPack 5 Channel synchronous serial interface (SSI) with two

modes: - Standard SSI Interface Controller - ‘Listen only’ Mode

SSI data word length programmable from 1 bit to 32 bit Data word encoding: Binary- or Gray-Code Parity: Odd, even or without SSI clock rate: 1µs – 15µs EIA-422 encoder inputs galvanically isolated by high

speed optocouplers Operating temperature 0°C to +70°C

Order Information RoHS Compliant TIP115-10R 5 Channel (SSI) Interface with ‘Listen

Only’ mode


TIP115-10R


TIP115-DOC


Support) TIP115-SW-65 Windows XP/XPE/2000 Software Support TIP115-SW-72 LynxOS Software Support TIP115-SW-82 LiNUX Software Support TIP115-SW-95 QNX 6 Software Support



09/2009



The Embedded I/O Company TIP116 4 Channel Quadrature / General Purpose Counter Application Information

The TIP116 IndustryPack® compatible module is primarily designed for motion control applications, but it is also applicable as general purpose counter. The TIP116 offers four channel quadrature / general purpose counter. Each channel consists of a 32 bit programmable counter, a 32 bit preload register, a 32 bit compare register and a 32 bit output latch. The 32 bit counter can be programmed for quadrature, up-/down or direction count. In quadrature count mode the counter is programmable for single, double and quadruple analysis of the encoder signals. Two special count modes are available, a cycling 'Divide-by-N' mode and a 'Single-Cycle' mode.

Additionally four control modes are available via the control input. The control input can be programmed to load, latch or reset the counter or it can be used as a gate for the counter clock. The level of the three input signals per channel can be RS422 or TTL. The input signals pass a digital filter for noise suppression before they are fed into the counter. The TIP116 also provides a RS422 clock output. The clock frequency is programmable to 1, 2, 4 or 8 MHz. A 16 bit down-counter with preload register allows timing intervals of up to 65ms. It can be used as reference timer for closed loop applications. For First-Time-Buyers the Engineering Documentation TIP116-ED is recommended. The Engineering Documentation includes TIP116-DOC, schematics and data sheets of TIP116.

Technical Information Interface according to IndustryPack specification Identification-PROM supports auto-configuration Single Size IndustryPack Four 32 bit counter, each with:

- 32 bit preload register - 32 bit comparator register - 32 bit latched output register - Up/down, direction or quadrature count - 1x, 2x or 4x resolution multiplier (quadrature count) - Divide-by-N, Single Cycle counting modes - Programmable control input with 4 additional control modes

Vectored interrupt DC to 4 MHz count frequency Inputs TTL/RS422 compatible Programmable RS422 clock output 16 bit down-counter with preload Operating temperature -40°C to +85°C



09/2009



Order Information

RoHS Compliant TIP116-10R Four channel quadrature / general

purpose counter


TIP116-10R

Documentation TIP116-DOC User Manual TIP116-ED Engineering Documentation (TIP116-

DOC, Schematics, Assembly Drawing, Data Sheets)






09/2009



The Embedded I/O Company TIP119 6 Channel 16 bit Quadrature Decoder Counter Application Information The TIP119 is an IndustryPack® compatible module providing six channels of quadrature decoder inputs. Each channel has a dedicated 16 bit wide quadrature decoder counter. The input signals can be of RS422A and RS423A level and pass a digital filter for noise suppression before they are fed into the counter. An interrupt can be generated at counter over- or underflow or on assertion of the index input. An 8 bit interrupt vector is supported.

For First-Time-Buyers the Engineering Documentation TIP119-ED is recommended. The Engineering Documentation includes TIP119-DOC, schematics and data sheets of TIP119. Driver support (TIP119-SW-xx) is available for different operating systems.

Technical Information Interface according to IndustryPack specification Single Size IndustryPack 6 Channels 16 bit quadrature counter Vectored interrupt Inputs RS422/RS423 compatible 1.3 MHz maximum tracking rate 220 ohm input impedance Operating temperature 0°C to +70°C

R 422RS423

Receiver

S /

Ind

us

try

Pa

ck

Lo

gic

Inte

rfa

ce

Ind

us

try

Pa

ck

I/O

Inte

rfa

ce

FPGA

LogicInterface 6 x

16 bitQuadrature

Counter

ID PROM

A1, B1, I1

A2, B2, I2

A3, B3, I3

A4, B4, I4

A5, B5, I5

A6, B6, I6

Order Information

RoHS Compliant TIP119-10R 6 Channel Quadrature IP


TIP119-10R


TIP119-DOC






10/2009



The Embedded I/O Company TIP150 1 or 2 Channel Synchro / Resolver-To-Digital-Converter

Application Information The TIP150 is an IndustryPack® compatible module providing one or two channels of a tracking synchro / resolver-to-digital converter. The resolution programming allows selection of 10, 12, 14 or 16 bit conversion. This combines the high tracking rate of a 10 bit converter with the precision of a 16 bit converter.

Two converter accuracies are available: TIP150-x0x with 4 arcmin +1LSB and TIP150-x1x with 2 arcmin +1LSB. The customer specific signal conditioning adapter (TIP150-Ay-xx) per channel provides an easy interface to the different types of synchro and resolvers. For highest accuracy the on board reference oscillator of the signal conditioning adapter TIP150-A2-xx and TIP150-A4-xx automatically compensates the phase error generated by the synchro / resolver. For First-Time-Buyers the Engineering Documentation TIP150-ED is recommended. The Engineering Documentation includes TIP150-DOC, schematics and data sheets. Software support (TIP150-SW-xx) is available for different operating systems.

Technical Information Interface according to IndustryPack specification Identification-PROM supports auto-configuration Single Size IndustryPack One or two channels Tracking Synchro/Resolver-To-

Digital-Converter Programmable resolution 10, 12, 14 or 16 bits Adjustable bandwidth Converter accuracy 4 or 2 arcmin + 1LSB Velocity output and built-in-test output Individual input voltage for each channel by signal

conditioning adapter Optional reference oscillator for each channel on signal

conditioning adapter Oscillator frequency factory selectable 2 - 20KHz Oscillator amplitude 11.8Vrms maximum Resolver phase error compensation



10/2009



Order Information

RoHS Compliant TIP150-30R One channel Tracking RDC, converter

accuracy 4 arcmin + 1LSB TIP150-31R One channel Tracking RDC, converter

accuracy 2 arcmin + 1LSB TIP150-40R Two channel Tracking RDC, converter

accuracy 4 arcmin + 1LSB TIP150-41R Two channel Tracking RDC, converter

accuracy 2 arcmin + 1LSB TIP150-A1-xxR Resolver Signal Conditioning Adapter TIP150-A2-xxR Resolver Signal Conditioning Adapter with

reference oscillator





TIP150-41R TIP150-A1-xx None RoHS compliant version of

TIP150-A1-xxR TIP150-A2-xx None RoHS compliant version of

TIP150-A2-xxR TIP150-A3-xx High Precision Synchro/Resolver Signal

Conditioning Adapter TIP150-A4-xx High Precision Synchro/Resolver Signal

Conditioning Adapter with reference oscillator

Documentation

TIP150-DOC User Manual TIP150-ED Engineering Documentation, includes

TIP150-DOC





09/2009



The Embedded I/O Company TIP250 8 Mbytes Flash Memory

Application Information The TIP250 is an IndustryPack® compatible module that offers an easy and reliable way to implement 8 Mbytes of Flash memory. The TIP250 is ideal for holding application code, operating system software or data. Two AM29LV033 devices (32 Mbit, x 8 organized) are used to provide 1 bank of 8 Mbytes (16 bit wide) Flash memory which is divided into 64 sectors of 128 Kbytes (16 bit wide).

Accesses to the TIP250 Flash memory occur within the IP memory space. After power-on the TIP250 comes up in read only mode. The IP I/O space holds the Flash Control Register and the Interrupt Vector Register. For First-Time-Buyers the Engineering Documentation TIP250-ED is recommended. The Engineering Documentation includes TIP250-DOC, schematics and data sheets. Software Support (TIP250-SW-xx) is available for different operating systems.

Technical Information Interface according to IndustryPack specification Identification-PROM supports auto-configuration Single Size IndustryPack 8 Mbytes of Flash Memory Organized in 1 bank of 8 Mbytes (16 bit wide), 64

sectors of 128 Kbytes (16 bit wide) Flash chip: 2 x AM29LV033, 90 ns, TSOP package Guaranteed min. erase and program cycle endurance:

1.000.000 cycles Typical bank erase time: 45 s Typical sector erase time: 0.7 s Typical word programming time: 9 µs Typical bank programming time: 36 s Interrupt support on program / erase cycles Power requirements: +5V only, on board +3.3V

generation No connections to IP I/O connector Operating temperature -40°C to +85°C



09/2009



Order Information RoHS Compliant TIP250-10R 8 Mbytes Flash Memory None RoHS Compliant TIP250-10 None RoHS compliant version of

TIP250-10R Documentation TIP250-DOC User Manual TIP250-ED Engineering Documentation, includes

TIP250-DOC

Software TIP250-SW-25 Integrity Software Support TIP250-SW-42 VxWorks Software Support (Legacy and

VxBus-enabled Software Support) TIP250-SW-65 Windows XP/XPE/2000 Software



09/2009



The Embedded I/O Company TIP255 2 Mbytes SRAM Memory with Battery Backup Application Information The TIP255 is an IndustryPack® compatible module that offers an easy and reliable way to implement 2 Mbytes of SRAM memory with battery backup. The TIP255 is ideal for holding configuration parameter and data logging applications.

Four 512 Kbit x eight low power SRAM devices are used to provide two banks of 1 Mbyte (16 bit wide) SRAM memory. A non-volatile controller together with the on board lithium battery converts the SRAM into non-volatile memory. The battery status can be monitored by the control and status register. Additionally an interrupt can be generated on battery low. Accesses to the TIP255 SRAM memory occur within the IP memory space. The IP I/O space holds the control and status register and the interrupt vector register. For First-Time-Buyers the Engineering Documentation TIP255-ED is recommended. The Engineering Documentation includes TIP255-DOC, schematics and data sheets.

Technical Information Interface according to IndustryPack specification Identification-PROM supports auto-configuration Single Size IndustryPack 2 Mbytes of SRAM Memory Organized in 2 banks of 1 Mbyte (16 bit wide) SRAM chip: 4 devices 512 Kbit x 8, 70ns, TSOP-2

package, low power Non-volatile controller converts SRAM into non-

volatile memory On board battery holder with lithium battery (type

CR2430, 285mAh) Automatically switches to battery backup supply when

Vcc supply drops Interrupt support on battery low Battery life time 8 years typical @ +25°C Wait states: no wait states Power requirements: +5V only, on board +3.3V

generation Operating temperature -40°C to +85°C

(TIP255-10-ET)

Order Information RoHS Compliant TIP255-10R 2 Mbytes SRAM Memory with Battery

Backup TIP255-10R-ET Same as TPMC255-10R but Extended

Temperature Range None RoHS Compliant TIP255-10 None RoHS compliant version of

TIP255-10R TIP255-10-ET None RoHS compliant version of

TIP255-10R-ET Documentation TIP255-DOC User Manual TIP255-ED Engineering Documentation, includes

TIP255-DOC


10/2009



The Embedded I/O Company TIP500 16 Channels of Isolated 12 bit A/D Conversion Application Information The TIP500 is an IndustryPack® compatible module with 16 single-ended or 8 differential channels of isolated 12 bit A/D conversion. The data acquisition and conversion time is up to 10µs without channel / gain change and up to 12.5µs with channel / gain change. The input multiplexer offers analog overvoltage protection of up to 70 Vpp. A programmable gain amplifier allows gains of 1, 2, 5, 10 or 1, 2, 4, 8. The full-scale input range is +/-10V for the TIP500-1x and 0-10V for the TIP500-2x. The isolated ADC, programmable gain amplifier and multiplexer are powered by an on board DC/DC converter. An interrupt can be generated at end-of-conversion supporting an 8 bit vector. Each TIP500 is factory calibrated. The calibration information is stored in the Identification-PROM unique to each IP.

For First-Time-Buyers the Engineering Documentation TIP500-ED is recommended. The Engineering Documentation includes TIP500-DOC, schematics and data sheets. Software support (TIP500-SW-xx) for different operating systems is available. Technical Information

Interface according to IndustryPack specification Identification-PROM supports auto-configuration Single Size IndustryPack 16 single-ended or 8 differential channels of isolated 12

bit A/D conversion ESD protected input multiplexer Programmable gain amplifier, gain 1, 2, 5, 10 or gain 1,

2, 4, 8 12 bit A/D converter with internal S/H and reference Full-scale input range +/- 10 V or 0-10V (gain = 1) Interrupt capability at end-of-conversion Factory calibrated, calibration information in

Identification-PROM unique to each IP Operating temperature –40°C to +85°C

Order Information

RoHS Compliant TIP500-10R 16 Single-Ended or 8 Differential

Channels of Isolated 12 bit Conversion, gain 1, 2, 5, 10, input range +/- 10V

TIP500-11R 16 Single-Ended or 8 Differential

Channels of Isolated 12 bit Conversion, gain 1, 2, 4, 8, input range +/- 10V

TIP500-20R As TIP500-10R but input range 0-10V TIP500-21R As TIP500-11R but input range 0-10V

None RoHS Compliant TIP500-10 None RoHS compliant version of TIP500-

10R TIP500-11 None RoHS compliant version of TIP500-



21R

Documentation TIP500-DOC User Manual TIP500-ED Engineering Documentation, includes TIP500-DOC





09/2009

TEWS TECHNOLOGIES GmbH


Am Bahnhof 7 25469 Halstenbek, Germany Phone: +49 (0) 4101 4058 0 Fax: +49 (0) 4101 4058 19

e-mail: [email protected] www.tews.com

TIP501 16 Channels of Isolated 16 bit A/D Conversion

Application Information The TIP501 is an IndustryPack® compatible module providing 16 single-ended or 8 differential channels of isolated 16 bit A/D conversion. The data acquisition and conversion time is up to 12µs without channel / gain change and up to 14.5µs with channel / gain change.

The input multiplexer offers analog overvoltage protection of up to 70Vpp. A programmable gain amplifier allows gains of 1, 2, 5, 10 or 1, 2, 4, 8. The full-scale input range is +/-10V for the TIP501-1x and 0-10V for the TIP501-2x. The isolated ADC, programmable gain amplifier and multiplexer are powered by an on board DC/DC converter. An interrupt can be generated at end-of-conversion supporting an 8 bit vector. Each TIP501 is factory calibrated. The calibration information is stored in the Identification-PROM unique to each IP. For First-Time-Buyers the Engineering Documentation TIP501-ED is recommended. The Engineering Documentation includes TIP501-DOC, schematics and data sheets. Software Support (TIP501-SW-xx) for different operating systems is available.

Technical Information Interface according to IndustryPack specification Identification-PROM supports auto-configuration Single Size IndustryPack 16 single-ended or 8 differential channels of isolated

16 bit A/D conversion ESD protected input multiplexer Programmable gain amplifier, gain 1, 2, 5, 10 or gain

1, 2, 4, 8 16 bit A/D converter with internal S/H and reference Full-scale input range +/- 10 V or 0-10V (gain = 1) Interrupt capability at end-of-conversion Factory calibrated, calibration information in

Identification-PROM unique to each IP Operating temperature –40°C to +85°C



09/2009



Order Information

RoHS Compliant TIP501-10R 16 Single-Ended or 8 Differential

Channels of Isolated 16 bit Conversion, gain 1, 2, 5, 10, input range +/-10V

TIP501-11R 16 Single-Ended or 8 Differential Channels of Isolated 16 bit Conversion, gain 1, 2, 4, 8, input range +/-10V

TIP501-20R As TIP501-10R but input range 0-10V TIP501-21R As TIP501-11R but input range 0-10V





TIP501-21R


TIP501-DOC






10/2009



The Embedded I/O Company TIP550 8 (4) Channels of Isolated 12 bit D/A Conversion Application Information The TIP550 is an IndustryPack® compatible module and provides 8 or 4 channels of isolated 12 bit analog outputs. The settling time to 0.01% is 13µs typical. The programmable output voltage range is +/-10V or 0-10V selectable by jumper. The isolated DAC and the output buffer are powered by an on board DC/DC converter. Each TIP550 is factory calibrated. The calibration information is stored in the Identification-PROM unique to each IP.

For First-Time-Buyers the Engineering Documentation TIP550-ED is recommended. The Engineering Documentation includes TIP550-DOC, schematics and data sheets. Software Support (TIP550-SW-xx) for different operating systems is available.

Technical Information Interface according to IndustryPack specification Identification-PROM supports auto-configuration Single Size IndustryPack 8 (4) channels of isolated 12 bit analog output Full-scale output range +/-10 V or 0-10V selectable by

jumper Factory calibrated, calibration information in

Identification-PROM unique to each IP Operating temperature -40°C to +85°C

Order Information

RoHS Compliant TIP550-10R 8 Channels of Isolated 12 bit Analog

Output TIP550-11R 4 Channels of Isolated 12 bit Analog

Output



TIP550-11R







10/2009



The Embedded I/O Company TIP551 4 Channels of Isolated 16 bit D/A Conversion Application Information The TIP551 is an IndustryPack® compatible module and offers 4 channels of isolated 16 bit analog outputs. Settling time to 0.003% is 10µs typical. The programmable output voltage range is +/-10V or 0-10V selectable by jumper. The DAC clears to 0V in both unipolar and bipolar output. The isolated DAC and the output buffer are powered by an on board DC/DC converter. Each TIP551 is factory calibrated. The calibration information is stored in the Identification-PROM unique to each IP.

For First-Time-Buyers the Engineering Documentation TIP551-ED is recommended. The Engineering Documentation includes TIP551-DOC, schematics and data sheets. Software support (TIP551-SW-xx) for different operating systems is available.

Technical Information Interface according to IndustryPack specification Identification-PROM supports auto-configuration Single Size IndustryPack 4 channels of isolated 16 bit analog output Full-scale output range +/-10 V or 0-10V selectable by

jumper Factory calibrated, calibration information in

Identification-PROM unique to each IP Operating temperature -40°C to +85°C

Order Information

RoHS Compliant TIP551-10R 4 Channels of Isolated 16 bit Analog

Output


10R



Support) TIP551-SW-65 Windows XP/XPE2000 Software Support TIP551-SW-72 LynxOS Software Support TIP551-SW-82 LiNUX Software Support TIP551-SW-95 QNX 6 Software Support



02/2010



The Embedded I/O Company TIP570 16 Channel multiplexed isolated 12 bit ADC / 8 Channel isolated 12 bit DAC Application Information The TIP570 is an IndustryPack® compatible module with an optically isolated 16 channel multiplexed 12 bit ADC and an optically isolated 8 channel 12 bit DAC. The ADC can be software configured to operate as 16 input channels in single-ended mode or 8 input channels in differential mode. The ADC input multiplexer is overvoltage protected up to 70Vpp. A programmable gain amplifier supports gains of 1, 2, 5, 10 (TIP570-10) or gains of 1, 2, 4, 8 (TIP570-11). The full-scale input voltage range is +/-10V. The data acquisition and conversion time is mode-dependent: up to 1µs typical without channel or gain change, up to 12.5µs typical with channel or gain change. The 8 channel DAC full-scale output voltage is +/-10V. The output amplifier is capable of sinking and sourcing 2mA for each DAC channel (1000pF load). The output voltage settles to 12 bits in 5µs typical. Each TIP570 is factory calibrated. The calibration data is stored in the EEPROM unique to each IP.

For First-Time-Buyers the Engineering Documentation TIP570-ED is recommended. The Engineering Documentation includes TIP570-DOC, schematics and data sheets. Software support (TIP570-SW-xx) for different operating systems is available.

Technical Information Interface according to IndustryPack specification Identification-PROM supports auto-configuration Single Size IndustryPack 16 channel multiplexed isolated 12 bit analog input

Input voltage range: +/-10V Input gains: 1, 2, 5, 10 or 1, 2, 4, 8

8 channel isolated 12 bit analog output Output voltage range: +/-10V Output sources and sinks 2mA / 1000pF load

Factory calibrated, calibration information in Identification-PROM unique to each IP

Operating temperature -40°C to +85°C

Ind

ustr

yP

ack

I/O

Inte

rface

Ind

us

try

Pa

ck

log

icIn

terf

ac

e

ID-PROM

Control &Interface

DC/DCConverter

Op

toco

up

ler

12 bit ADCwith S&H

12 bit DAC8 Channels

PGA

16 ChannelInput MUX



02/2010



Order Information

RoHS Compliant TIP570-10R 16 Channel Multiplexed Isolated 12 bit

ADC with Gain = 1, 2, 5, 10 and 8 Channel Isolated 12 bit DAC

TIP570-11R 16 Channel Multiplexed Isolated 12 bit ADC with Gain = 1, 2, 4, 8 and 8 Channel Isolated 12 bit DAC

TIP570-IO-10R Mounting Rail I/O module, provides 50 terminals, 50 pin flat cable



TIP570-10R TIP570-IO-10 None RoHS compliant version of

TIP570-IO-10R



Support) TIP570-SW-65 Windows XPXPE/2000 Software Support TIP570-SW-72 LynxOS Software Support TIP570-SW-82 LiNUX Software Support TIP570-SW-95 QNX 6 Software Support



09/2009



The Embedded I/O Company TIP600 16 Interrupt generating Digital Inputs Application Information The TIP600 is an IndustryPack® compatible module and has 16 digital inputs galvanically isolated by optocoupler. The individual inputs are potential free in relation to each other. A high performance input circuit ensures a defined switching point and polarization protection against confusing the pole. All inputs have an electronic debounce circuit with a freely programmable debounce time. All inputs can generate an interrupt. The signal edge handling is programmable. For systems with particularly fast reaction, each input can be assigned its own interrupt vector.

For First-Time-Buyers the Engineering Documentation TIP600-ED is recommended. The Engineering Documentation includes TIP600-DOC, schematics and data sheets. The Software Support TIP600-SW-xx provides functions to configure the TIP600, read the input status and connect software events to input state changes.

Technical Information Interface according to IndustryPack specification Identification-PROM supports auto-configuration Single Size IndustryPack 16 interrupt generating digital inputs 24V signal voltage for inputs, other voltages on

request Optocouplers for galvanic isolation of input to

computer system All inputs isolated against each other All inputs protected against confusing the pole All inputs have an electronic debounce circuit,

debounce time is freely programmable



09/2009



Order Information RoHS Compliant TIP600-10R 16 interrupt generating digital inputs


TIP600-10R


TIP600-DOC






09/2009



The Embedded I/O Company TIP605 16 Interrupt generating Digital Inputs Application Information The TIP605 is an IndustryPack® compatible module with 16 digital inputs galvanically isolated by optocoupler. The individual inputs are potential free in relation to each other. A high performance input circuit ensures a defined switching point and polarization protection against confusing the pole. All inputs have an electronic debounce circuit with a freely programmable debounce time. All inputs can generate an interrupt. The signal edge handling is programmable. For the TIP605 the operating temperature range is –40°C to +85°C.

For First-Time-Buyers the Engineering Documentation TIP605-ED is recommended. The Engineering Documentation includes TIP605-DOC, schematics and data sheets. The driver software TIP605-SW-xx provides functions to configure the TIP605, read the input status and connect software events to input state changes.

Indu

stry

Pac

k Lo

gic

Inte

rface

Indu

stry

Pac

k I/O

Inte

rface

ID-PROM

ControllerGlue Logic

Register

16 InputCircuits

Optocoupler

ElectronicDebouncing

Technical Information Interface according to IndustryPack specification Identification-PROM supports auto-configuration Single Size IndustryPack 16 interrupt generating digital inputs 24V signal voltage for inputs, other voltages on

request Optocouplers for galvanic isolation of input to

computer system All inputs isolated against each other All inputs protected against confusing the pole All inputs have an electronic debounce circuit,

debounce time is freely programmable Operating temperature -40°C to +85°C MTBF (MIL-HDBK217F/FN2 GB 20°C)

TIP605-xx: 703000h Order Information

RoHS Compliant TIP605-10R 16 Interrupt Generating Digital Inputs


TIP605-10R


TIP605-DOC






09/2009



The Embedded I/O Company TIP606 16 Interrupt generating Digital Inputs Application Information The TIP606 is an IndustryPack® compatible module and is designed for avionic test environments. It provides 16 optically isolated differential inputs for high unipolar input voltage which may exceed the supply voltage of the module. The inputs can withstand input voltage up to 44V maximum between the two differential input pins. Due to the differential inputs of the TIP606, it is even possible to use the module in noisy environments. The TIP606 provides a high differential input resistance of 112kohms typically. The interface circuit will detect a logic 1, if the differential voltage is typically greater than +14.0V and it will detect a logic 0, if the input voltage is typically lower than +3.5V. The inputs are isolated from the IP interface via optocouplers. Each input is capable of generating interrupts on rising or falling edges of the input signal. It is also possible to disable the generation of interrupts and poll the input register for new data.

All inputs have an electronic debounce circuit. The debounce time is programmable in a range from 900µs up to 230ms in 256 steps of 900µs. The debounce circuit can also be disabled. The TIP606 is designed for an operating temperature from -40°C to +85°C. For First-Time-Buyers the Engineering Documentation TIP606-ED is recommended. The Engineering Documentation includes TIP606-DOC, schematics and data sheets. The driver software TIP606-SW-xx provides functions to configure the TIP606, read the input status and connect software events to input state changes.

Technical Information Interface according to IndustryPack specification Identification-PROM supports auto-configuration Single Size IndustryPack 16 interrupt generating differential digital inputs Up to 44V signal voltage for all 16 inputs Optocouplers for galvanic isolation of input to computer

system All inputs have an electronic debounce circuit,

debounce time is freely programmable Operating temperature -40°C to +85°C MTBF (MIL-HDBK217F/FN2 GB 20°C)

TIP606-xx: 673000 h

Ind

ustr

yP

ack

I/O

Inte

rface

Ind

us

try

Pa

ck

log

icIn

terf

ac

e

ID-PROM

ControllerGlue Logic

ElectronicDebouncing

Op

toco

up

ler

16 InputCircuits

Register

Order Information RoHS Compliant TIP606-10R 16 Interrupt Generating Digital Inputs


10R


TIP606-DOC





09/2009



The Embedded I/O Company TIP610 16/20 Channel TTL I/O Application Information The TIP610 is an IndustryPack® compatible module with a TTL compatible I/O interface based on the Zilog Z8536 CIO, a counter/timer and parallel I/O device. The TIP610-10 implements two independent 8 bit, double-buffered, bidirectional I/O ports, plus a 4 bit special-purpose I/O port. The Z8536 CIO allows configuring each of the two 8 bit ports as input or output. The third I/O port can be configured as I/O or as handshake-control-port. A configuration jumper block permits to configure the two I/O ports as permanent or programmable input/output. Also the 4 bit port function is configured by these jumpers.

For First-Time-Buyers the Engineering Documentation TIP610-ED is recommended. The Engineering Documentation includes TIP610-DOC, schematics and data sheets of TIP610. Software Support (TIP610-SW-xx) is available for different operating systems.

Technical Information Interface according to IndustryPack specification Identification-PROM supports auto-configuration Single Size IndustryPack 16/20 Channel TTL I/O arranged as two 8 bit I/O ports

plus a 4 bit control port 24mA source/sink drive per line for the two 8bit I/O

ports Zilog Z8536 I/O Controller on board Operating temperature 0°C to +70°C

Order Information

RoHS Compliant TIP610-10R 16/20 Channel TTL I/O


10R


TIP610-DOC





05/2010



The Embedded I/O Company TIP620 Digital 48, Dual PI/T

Application Information TIP620 is an IndustryPack® compatible module emulating two Motorola MC68230 Programmable Interface/Timer (PI/T) ICs (without DMA). Together with the IDROM and additional logic they are integrated in a Xilinx Spartan II FPGA. The TIP620-10 and TIP620-11 each has its own IDROM and I/O configuration. By changing solder connections, users may convert from one product to the other or intermediate configurations. TIP620-10 is configured for 48 general purpose lines of bit I/O. Timer I/O is available. In this configuration 48 of the 50 cable lines are I/O, with 2 ground lines. The TIP620-11 is configured to support additional features of the PI/Ts, such as Timer, I/O, interrupts, and double-buffered data transfer with hardware handshake. 32 lines for bit I/O are available, 8 bit or 16 bit (unidirectional, bi-directional, single or double buffered) plus 8 lines as programmable handshake lines or timer I/O with alternate ground wires.

For First-Time-Buyers the Engineering Documentation TIP620-ED is recommended. The Engineering Documentation includes TIP620-DOC, schematics and data sheets. Software Support is available for different operating systems.

Technical Information Interface according to IndustryPack specification Identification-PROM supports auto-configuration Single Size IndustryPack Up to 48 digital TTL I/O lines TTL compatible: 3.3V output high level, 5V tolerant Termination: 10kΩ pull-ups to 3.3V Output current max. +/- 2mA (partly +/- 8mA) ESD and overvoltage protection for each I/O line Operating temperature -40°C to +85°C

Order Information

RoHS Compliant TIP620-10R 48 Line Digital Interface TIP620-11R Dual Programmable Interface/Timer



TIP620-11R


TIP620-DOC

Software

TIP620-SW-42 VxWorks Software Support (Legacy and VxBus-enabled Software Support)

TIP620-SW-65 Windows XP/XPE/2000 Software Support



09/2009



The Embedded I/O Company TIP630 Reconfigurable FPGA with 48 TTL I/O Application Information The TIP630 is an IndustryPack® compatible module providing a user configurable FPGA with 200,000 system gates. 48 I/O lines of the FPGA are directly connected to the IP I/O connector. Each I/O line has a series damping resistor and is protected against ESD and overvoltage. Six pull up resistor networks mounted in sockets are provided for the I/O lines. Pull up voltage is selectable to be either +3.3V or +5V. The I/O lines are individually programmable as input, output or tri-state I/O. All IP bus signals of the IP interface are routed to the FPGA allowing to implement 8 MHz or 32 MHz bus interfaces with or without DMA. Several clock sources are available at the FPGA: the IP clock (8 MHz or 32 MHz), a local 32 MHz clock and two outputs of the programmable clock generator (250 KHz – 166 MHz).

The FPGA can be configured via the IP bus or optional by a PROM which can be mounted in a socket. The configuration download for the FPGA and the programming of the clock generator is implemented by a CPLD reserving the upper two 16 bit registers of the IP I/O space. After the FPGA has been configured with the user application it can be accessed via the IP bus. The CPLD can be used for reprogramming the FPGA without turning power off. Furthermore the CPLD offers a default ID-Prom contents which can stay active after configuring the FPGA or it can be switched off and replaced by a user ID-PROM implemented in the FPGA. User applications can be developed using the design software ISE WebPACK which can be downloaded free of charge from www.xilinx.com . For First Time Users the Engineering Documentation TIP630-ED is recommended. The Engineering Documentation includes TIP630-DOC, schematics, data sheets / application notes of the components and well documented sample VHDL source code. Software support (TIP630-SW-xx) is available for different operating systems.

Technical Information Interface according to IndustryPack specification Single Size IndustryPack Xilinx XC2S200-5 SpartanII FPGA logic configurable

via IP bus or optional by PROM XC17S200APD8I All IP bus interface signals routed to the FPGA FPGA clock options:

IP bus clock (8 or 32 MHz) Local 32 MHz clock oscillator PLL programmable clock generator CY22150

(250 KHz – 166 MHz), 2 clock outputs connected to FPGA

48 digital TTL I/O lines I/O lines individually programmable as input,

output, tri-state I/O 6 pull up resistor networks mounted in sockets jumper selectable +3.3V or +5V common for all

pull up resistor networks ESD and overvoltage protection for each I/O line

Operating temperature range -40°C to +85°C

http://www.xilinx.com/



09/2009



Order Information

RoHS Compliant TIP630-10R Reconfigurable FPGA logic with 48

TTL I/O lines


TIP630-10R


TIP630-DOC





09/2009



The Embedded I/O Company TIP670 8 (4) Digital Inputs, 8 (4) Digital Outputs Application Information The TIP670 is an IndustryPack® compatible module with 8 (4) digital inputs galvanically isolated by optocoupler. The individual inputs are potential free in relation to each other. A high performance input circuit ensures a defined switching point and polarization protection against confusing the pole. All inputs have an electronic debounce circuit with fixed debounce time. All inputs can generate an interrupt. The signal edge handling is programmable. For systems with particularly fast reaction, each input can be assigned its own interrupt vector. The TIP670 has 8 (4) digital outputs with galvanic isolation via optocouplers. The outputs are isolated against each other in groups of two. All outputs resist short-circuits and are protected against thermal overload. The output drivers are capable of driving 0.5A continuous per channel. Each output can be configured individually as high or low side switch.

For First-Time-Buyers the Engineering Documentation TIP670-ED is recommended. The Engineering Documentation includes TIP670-DOC, schematics, and data sheets. The driver software TIP670-SW-xx provides functions to configure the TIP670, read the input status, write the output status and connect software events to input state changes.

Technical Information Interface according to IndustryPack specification Identification-PROM supports auto-configuration Single Size IndustryPack 8 (4) interrupt generating digital inputs 24V signal voltage for inputs Optocouplers for galvanic isolation of input to computer

system All inputs isolated against each other All inputs protected against confusing the pole All inputs have an electronic debounce circuit with fixed

debounce time 8 (4) digital outputs, high and low side switches 24V signal voltage, current per output 0.5A Optocouplers for galvanic isolation of outputs to

computer system Outputs are short-circuit protected Outputs are isolated against each other in groups of

two Outputs protected against thermal overload Watch dog timer resets all channels in case of

triggering failure



09/2009



Order Information

RoHS Compliant TIP670-10R 8 Interrupt Generating Digital Inputs, 8

Digital Outputs, 24 V, 0.5 A, high and low side switches

TIP670-20R As TIP670-10R but 4 inputs and 4 outputs



TIP670-20R


TIP670-DOC


Support) TIP670-SW-65 Windows XP/XPE/2000 Software Support TIP670-SW-72 LynxOS Software Support TIP670-SW-82 LiNUX Software Support TIP670-SW-95 QNX 6 Software Support For other operating systems please contact TEWS.


09/2009



The Embedded I/O Company TIP672 24 Differential I/O Lines with Interrupts Application Information The TIP672 is an IndustryPack® compatible module providing 24 digital differential I/O lines using EIA-422 / EIA-485 compatible ESD protected line driver and receiver. Each line can be individually configured as differential input or differential output. The differential receivers are always enabled, allows determining the state of the I/O line at any time. This can be used as read back function for lines configured as outputs. All 24 input lines can generate an interrupt. Each input interrupt can individually be enabled and cleared. The signal edge handling is programmable. Configuring an I/O line as output enables the differential transmitter and the I/O line reflects the state programmed in the output register. Optional the I/O lines can be configured for simultaneous update internally and across several IP’s by an external clock source. The polarity of the external clock source is programmable. 6 resistor networks (4 x 120 ohms) mounted in sockets are used to terminate the differential I/O lines. The resistor networks can be removed or changed in value. After power-on or reset all I/O lines are configured as input and all pending interrupts are cleared.

For First Time Users the Engineering Documentation TIP672-ED is recommended. The Engineering Documentation includes TIP672-DOC, schematics and data sheets. Software Support (TIP672-SW-xx) is available for different operating systems.

Technical Information Interface according to IndustryPack specification Identification-PROM supports auto-configuration Single Size IndustryPack 24 digital I/O lines with differential EIA-422 / EIA-485

compatible ESD protected line driver / receiver I/O lines individually programmable as input or output Full interrupt capability on inputs Six 4 x 120 ohms resistor networks mounted in

sockets for I/O line termination Programmable simultaneous update feature by

external clock source (TTL level) Operating temperature range -40°C to +85°C



09/2009



Order Information

RoHS Compliant TIP672-10R 24 digital I/O lines with differential

interface (EIA-422 / EIA-485) TIP672-10R-ET Same as TIP672-10R but Extended

Temperature Range


TIP672-10R TIP672-10-ET None RoHS compliant version of

TIP672-10R-ET


TIP672-DOC





09/2009



The Embedded I/O Company TIP675 48 TTL I/O Lines with Interrupts Application Information The TIP675 is an IndustryPack® compatible module providing 48 digital TTL tri-state I/O lines with pull up resistors. Each of the 48 I/O lines is ESD protected and protected against overvoltage. The line inputs are always enabled, allows determining the state of the I/O line at any time. This can be used as read back function for lines configured as outputs. All 48 input lines can generate an interrupt. Each input interrupt can individually be enabled and cleared. Interrupts for negative and positive transitions could be used together with separate interrupt pending registers. All interrupt inputs have an electronic debounce circuit to prevent short spikes on input lines to cause an IP interrupt. Optional the I/O lines can be configured for simultaneous update internally and across several IP’s by an external clock source. The polarity of the external clock source is programmable. 6 resistor networks mounted in sockets are used to pull the tri-state I/O lines to a logic high value. The resistor networks can be removed or changed in value. After power-on or reset all I/O lines are configured as input and all pending interrupts are cleared.


Technical Information Interface according to IndustryPack specification Identification-PROM supports auto-configuration Single Size IndustryPack 48 digital TTL tri-state I/O lines with pull up resistors I/O lines individually programmable as input or output Full interrupt capability on inputs Electronic debounce circuit for interrupt ESD and overvoltage protection for each I/O line Resistor networks mounted in sockets as I/O line pull

up Programmable simultaneous update feature by

external clock source (TTL level) Operating temperature range -40°C to +85°C



09/2009



Order Information

RoHS Compliant TIP675-10R 48 digital TTL tri-state I/O Lines with

Interrupts


TIP675-10R


TIP675-DOC





09/2009



The Embedded I/O Company TIP700 16 (8) Digital Outputs, high and low side switches Application Information The TIP700 is an IndustryPack® compatible module providing 16 (8) digital outputs with galvanic isolation via optocouplers. The outputs are isolated against each other in groups of two. All outputs resist short-circuits and are protected against thermal overload. The outputs are capable of driving 0.5A per channel. Each output can be configured individually as high or low side switch.

For First-Time-Buyers the Engineering Documentation TIP700-ED is recommended. The Engineering Documentation includes TIP700-DOC, schematics and data sheets. Software Support (TIP700-SW-xx) is available for different operating systems.

Technical Information Interface according to IndustryPack specification Identification-PROM supports auto-configuration Single Size IndustryPack 16 (8) digital outputs, high and low side switches 24V signal voltage, current per output 0.5A Optocouplers for galvanic isolation of outputs to

computer system Outputs are isolated against each other in groups of

two Outputs are short-circuit protected Outputs protected against thermal overload Watchdog timer resets all channels in case of

triggering failure



09/2009



Order Information

RoHS Compliant TIP700-10R 16 Digital Outputs, 24V, 0.5A high and low side switches TIP700-20R Same as TIP700-10R but 8 outputs



TIP700-20R


TIP700-DOC





09/2009



The Embedded I/O Company TIP710 16 Digital Outputs, High Side Switch Application Information The TIP710 is an IndustryPack® compatible module providing 16 digital outputs configured as high side switch with galvanic isolation via optocouplers. The TIP710 directly controls up to 16 lines of all kinds of resistive, capacitive and inductive loads. The outputs are capable of driving 1A continuous per channel at an external supply voltage of 6V to 48V. All outputs resist short-circuits and are protected against thermal overload. After power-on or reset all channels are in the off state. A hardware watchdog clears all outputs in case of trigger failure.


Technical Information Interface according to IndustryPack specification Identification-PROM supports auto-configuration Single Size IndustryPack 16 digital outputs, high side switches Output signal voltage 6V to 48V, common to all

outputs, externally supplied Output current: 1A continuous per channel Optocouplers for galvanic isolation of outputs to

computer system Outputs are short-circuit protected Outputs protected against thermal overload Watchdog timer resets all channels in case of

triggering failure Operating temperature range –40°C to +85°C

Order Information

RoHS Compliant TIP710-10R 16 Digital Outputs, high side switches, 6V to 48V, 1A


TIP710-10R


TIP710-DOC



Support TIP710-SW-72 LynxOS Software Support TIP710-SW-82 LiNUX Software Support TIP710-SW-95 QNX 6 Software Support For othe

Date post:	12-Feb-2021
Category:	Documents
Upload:	others
View:	0 times
Download:	0 times

IndustryPack® Modules - Bentech...

Documents