of 56
7/30/2019 Inert systems
1/56
GloveboxesHoods & Vacuum Chambers
Turnkey Systems
Copyright 2010 Terra Universal, Inc.Mini-Catalog Vol. 3, No. 15
Low-Cost Solutions
for High-Tech Industries
Low-Cost Solutions
for High-Tech Industries CompoundingAsepticIsolatormeets
USPrequirementspage20
EconomicalSmartGlovebox:integrated
N2controllermaintainsRHsetpointto
protectsensitivepartspage7
CompoundingAsepticIsolatormeets
USPrequirementspage20
EconomicalSmartGlovebox:integrated
N2controllermaintainsRHsetpointto
protectsensitivepartspage7
7/30/2019 Inert systems
2/56
Terra Universal GloveboxesCustom Configurations
On a Standard Basis!
Step 1: Select Enclosure Style and Material
Humidity Control
Begins on page 28These modules monitor and regulate the process gas tomaintain the humidity level you specify. Low-humiditymodules achieve desired conditions by regulating the purge
gas (nitrogen, argon, or dry air).
Process Gas Generation & AnalysisBegins on page 30
Terra provides gas generators, mixers, and monitors to
guarantee a reliable processing environment.
Temperature ControlBegins on page 22
A wide range of process temperature solutions, from -40to +300C. Double-wall, insulated gloveboxes ensure stabletemperatures. The Sequence Controller allows multi-cycle
process documentation and control.
Vacuum Control
Begins on page 10Gloveboxes and vacuum controls for a wide range of process
pressures, from 5" WG to one atmosphere.
Static ControlBegins on page 30
Terra engineers will congure the right combination of ionizers
and dissipative materials to protect sensitive parts against ESD.
Particle and Germ ControlBegins on page 31
Terra helps you meet cleanliness requirements as low asClass 1 through laminar ow and HEPA/ULPA ltration
technologies. Radius corners and ultra-clean materialscontribute to a clean, aseptic processing environment.
Laminar Flow and Exhaust HoodsBegins on page 34
Terras versatile designs let you congure a chamber to your exact process
specicationsusing standard control modules and standard pricing!
Plastic Gloveboxes(Series 100 and 200)
Stainless Steel Gloveboxes(Series 300 - 600)
Whichever modules you select, Terra will deliver atested, turnkey system thats ready for service!
Step 2: Select Environmental Control Modules
Our engineers work hand-in-hand with yours to develop cost-effectivesolutions to unique application challenges.
Custom Sizes Easy-clean radius corners Equipment Interface Modules Process Equipment Enclosures
Double-wall Construction Process Control Software
Special Inlet/Exhaust Filtration More!
Glovebox:
(See overviewon facing page)
ControlCapabilities*
* With selection of appropriate accessories** Specify double-wall, insulated design for
improved efficiency
Low Humidity
High Humidity
ProcessGas Mix
Vacuumto 5" WG
Vacuumto 29.9" WG
Pass-ThroughOven (to 300C)
Gas Heating(to 300F)**
Refrigeration(to -40C)**
HEPA Filtration StaticNeutralization
Serie
s100
Pla
stic
Serie
s200,
210
,310
Serie
s300
SS
Serie
s400
SS
Serie
s500
FullVie
w
Serie
s60
0Fr
ont
View
Bio
SafeSS
Custom Modifications
NOTE: All prices and specifications are subject to change without
otice. Crating charges apply to selected items. Call for information.
2010 Terra Universal, Inc. All rights reserved.
Printed in USA 121510
7/30/2019 Inert systems
3/56
A/B. Series 100 Plastic
Gloveboxes See page 8
Available in ve materials 3 Polypropylene
3 Static-Dissipative PVC 3 Acrylic
3 Non-Dissipative PVC 3 Polycarbonate
C. Plastic Vacuum
Gloveboxes See page 10Chambers for vacuum levels to 29.9" Hg- ideal for degassing, drying and anaerobic work
D. BioSafe Gloveboxes See page 21
Smooth, rounded corners with continuous seamwelds for easy disinfection
E. Series 300 Stainless Steel
Gloveboxes See page 14
Ideal for seam welding, leak testing, and other semi-conductor and pharmaceutical processesVersatile side flanges allow easy installation of airlocks, vacuum ovens, and other modules
F. Series 400 Stainless Steel
Gloveboxes See page 16Accommodates pass-through vacuum antechamberRoomy processing area
G/H. Series 500/600 Full-View
Gloveboxes
Series 500 See page 18Features opposing arm ports for dual-side accessTransparent static-dissipative PVC or polycarbonatefront/rear panels
Series 600 See page 19Polycarbonate or safety glass front windowAccommodates air locks and other access modules
. Compounding Chamber See page 20
Meets requirements of USP for sterilecompoundingLaminar flow-through and recirculating designs
J. Insulated Glovebox See page 22
Polyurethane insulation enhances energy efficiencyDouble-pane viewing windowOperates with Terras Constant Temperature Modules(Shown in photo)
StandardGloveboxes
Series 100 Polypropylene
Series 100 Acrylic
Series 200 BioSafeGloveboxfor sterileprocessing
Series 300 Series 400with vacuumantechamber
Series 500
InsulatedGlovebox
Series 600
B
C D
E F
G H
I J
CompoundingAseptic Isolator
SmartGlovebox with on-boardcontrol system page 7
A
1To Order, Call 714-578-6000or Fax 714-578-6020 Vol. 3 No. 15
7/30/2019 Inert systems
4/56
Standard environmental controls foreasy, economical system configurationsSample Applications
Temperature/Humidity
Cycling Chamber
Double-wall constructionfeatures 4" of insulation
System shown: Cat. # 1695-02
System shown: Cat. # 1695-03See page 22 for standard models.
This chamber includes a refrigeration module capable of maintaining temperatures as low as-20C. The stainless steel chamber features double-wall construction with 2" ofpolyurethane insulation for optimal thermal efciency. A humidity control system,
including a variable purge controllerand automatic humidity controller,regulates the nitrogen process gas tomaintain an internal moisture level aslow as 2%RH.
Sample Application:
Protein Analysis
A microscope bellows accommodatesanalytical equipment.
Sample Application:
Material Stress Testing
Chamber
Refrigerated, Low-Humidity
This glovebox is ideal for accelerated-life testing of elastomers, ber composites, and othermaterials over a broad range of temperature (-20F to +140F) and humidity (5 to 95% RH).
Double-wall construction is provided on all sides. Viewing windows are double-panepolycarbonate for strength and temperature resistance. Stainless steel walls include 4" ofpolyurethane insulation.
A pass-through oven on one side of the processing chamber allows degassing at temperatures
up to 300C, and an opposing-side air lock allows parts removal. A closed-loop recirculationmodule continuously recycles air through a HEPA lter and an activated charcoal lter forremoval of organic vapors.
2 Thousands of Critical Environment Solutions:www.TerraUniversal.com
7/30/2019 Inert systems
5/56
Pharmaceutical
Packaging Chambersesigned for safe handling of pharmaceutical powders, this containment glovebox
perates under negative pressure. Multiple ventilation ports ensure containment ofowders when access doors are opened, and dual vacuum lines allow connection ofacuum wands for easy clean-up of powder spills.
owder containers are introduced into the outside chambers via dual pneumaticallyperated, footswitch-activated doors; a loading platform at the rear of the unitccommodates bulk containers. A large opening on the bottom of the central chamberonnects to a containment drum by means of a rubber bellows, allowing safe removal ofrge packages or loose powder. Overall dimensions: 104"W x 32.5"D x 33"H.
VacuumPorts
4 Vacuum Lines8 EmergencyVentilation
Bellows Connectorto Drum Container
Pneumatic Doors(rear access)
Pneumatic doorswith rear loadingplatforms
System shown:Cat. # 1695-27
Ordering InformationBegins on page 8
System shown:Cat. No. 1695-01
BlowerControls
High-Volume
GasMixer
Recirculation Plenum/Cooler/Clean-out
Air Lock Air Lock
HEPA Filter / Blower withPressure Alarms and Emergency Vent
esigned to provide a clean, moisture-free environment, this glovebox is large enough to
ccommodate wafer spinners used in the deposition process. Its rounded internal cornersso make it ideal for pharmaceutical powders.
incorporates a high-volume process gas mixer that controls percentages of two processases. A three-sided plenum design recirculates the process gas through dual lter/fanodules for HEPA ltration (99.99% efcient @ 0.3 m particles). The bottom plenumcludes cooling coils that compensate for heat-generating process equipment to ensure a
onstant temperature of 68F.
ual-side air locks afford easy loading and unloading of wafers. Sample Application:Photoresist Deposition
Particle-Free, Low-Humidity
Glovebox
Radius corners allow easyleaning
Ordering InformationBegins on page 7
3To Order, Call 714-578-6000or Fax 714-578-6020 Vol. 3 No. 15
7/30/2019 Inert systems
6/56
Radioactive MaterialHandling Chamber
Radius corners simplifycleaning, eliminate seamsand cracks
Bag-in, Bag-out accessport allows safe handlingof packaging containingradioactive materials
This 12-gauge stainless steel isolation glovebox is designed for safe handling of radioactivematerials used in medical applications. It features two chambers connected by a vacuum port.One-piece gaskets and heavy-duty counter-balanced port hatches ensure a low leak rate of0.5% of the volume of the total enclosure per hour (tested under 5" WG of vacuum).
Stable Temperature/Humidity
Containment GloveboxThis glovebox safely contains potential biohazards while providing a stable environment over
a broad range of temperatures (-2C to 36C) tested at various humidity levels between 0and 75% RH. The stainless steel chamber features 2" of insulation and internal dimensionsof 33" x 33" x 33" (overall dimensions: 37"W x 37"D x 52"H). A high-capacity air conditionerholds a stable temperature down to -2C, and a 4000W heater integrated into the evaporatorcoil achieves temperature stability to 36C. The dry nitrogen feed gas provides a low %RH;an ultrasonic humidier provides elevated RH to 74% without moisture condensation. Thechamber includes a bag-in/bag-out port that can be used for transferring waste out of thechamber. The large swing-up access door allows easy cleaning of the chamber.
Standard environmental controls foreasy, economical system configurations
System shown:Cat. No. 1695-10
Low Temperature
A/C ModuleEvaporator Coil
with Heater
0% RHNitrogen
Ultrasonic Humidifier
WasteChute
System shown:Cat. # 1695-26
Bag-In/Bag-Out Port9"-dia. port with closure operated fromglovebox interior. Specify for any Terraglovebox. Cat. # $/Each
1694-43 260.00
BagsPackage of 10 12-mil PVC bags
Cat. # $/Each
1694-44 104.00
Swing-up door for easy accessand cleaning See page 20 for standard
refrigerated models.
Sample Applications
4 Thousands of Critical Environment Solutions:www.TerraUniversal.com
7/30/2019 Inert systems
7/56
Ordering InformationBegins on page 7
CO
VariablePurge
Controller
% CODisplay/Control
% RH Display/Control
Humidifier(98% RH) Gas Cooler
(68FConstant)
AirLock
Vent toCeiling
AirLock
Vent to
Ceiling
Ventilated Hazardous
Environment Chamber this application, potentially lethal CO gas is fed into a large chamber at precise
oncentrations to allow accurate sensor calibration.
gas mixing system maintains a ratio of 2% CO/98% air during calibration. To meetequirements for high-humidity sensor performance, a Humex humidier raises theoisture level inside the chamber to 95% RH. A process gas heater and cooler provide
recise calibration temperatures. Circulation fans ensure uniform temperature and humidityroughout the main chamber. An emergency ventilation system evacuates the CO/airixtures from the main chamber.
Model shown:Cat. No. 1695-08
Meteorite
NitrogenChamber
Pneumaticdoor air locks see page 22
his 304 electropolished stainless steel gloveboxcongured for processing meteorite samples inlow-particle, low-humidity environment. Each
ystem consists of two glovebox chambers linkedy a pass-through air lock, which allows transfer
samples without affecting conditions in eitherhamber.
ainless steel glove ports with hypalon gloveslow manipulation of samples. Stainless steelhelves mounted inside each chamber allowganized sample storage.
erras Dual Purge and NitroWatch controlystems automatically regulate the nitrogen ow
the chambers in order to maintain a user setoint between ambient and 5%RH.
5To Order, Call 714-578-6000or Fax 714-578-6020 Vol. 3 No. 15
7/30/2019 Inert systems
8/56
Sample Applications
Low-Humidity, High-Capacity
Processing Chamber
Standard environmental controls foreasy, economical system configurations
This custom glovebox provides optimal visibility and convenientaccess to a large, humidity-controlled processing area. Dualfootswitch-activated pneumatic doors simplify parts insertionthrough large antechambers. The Dual Purge System andDewWatch humidity control systems maintain a user-selected sub-ambient moisture level down to 1 ppm(v).
Ref. No. 1695-11
Anaerobic
Test Chamber
Designed for drug efcacy and dosing studiesin anaerobic environments, this automated,dual-level testing chamber maintains an oxygenconcentration down to 0.1% at a selectedtemperature. Computer-controlled electronicinterlocks and rapid purging antechambers allowtransfer of test samples without disturbing the testenvironment. These interlocks, in coordinationwith programmable UV sterilization and HEPAltration cycles, prevent microbe contaminationof the outside environment during sample/equipment extraction.
Other features include touch screen controlpanel, programmable presets, pneumatic doorsleading into the main chamber, rear access panelsfor large equipment maintenance and end-of-
cycle cleaning.
Applications: Extremely Drug-Resistant (XDR)Tuberculosis Therapy Trials
A/C + Heater
Trace O2 Analyers
N2Generator
DryCycler
PneumaticDoors
& HousingHEPAFiltered
Inlet/OutletVents
H EPA H EPA
HEPA HEPA
H EPA H EPA
6 Thousands of Critical Environment Solutions:www.TerraUniversal.com
7/30/2019 Inert systems
9/56
A
N
M
D
L
Smart Glovebox
Automated RH Control System
Seconds toinstall andprogram!
Automates low-humidity processing to preventdegradation of moisture-parts
Gas control system auto-adjusts nitrogen purge tomaintain humidity set point
Ideal for work with semiconductor components, medicaldevices and pharmaceutical powders
Fully integrated turnkey system takes seconds to installand program
erras Smart Glovebox automatically maintains a low-humidity environment tootect moisture-sensitive parts.
s quick-response feedback system continuously monitors the chambers relativeumidity level and indicates the measured value on a bright LED display. Theinute the %RH climbs above a set point value, the Smart Glovebox activatesow of dry nitrogen for as long as needed to restore the desired humidity level.
his fast-acting control system economizes on nitrogen use. Comparison testingveals that the Smart Glovebox maintaining a 10% RH level uses only 22%the nitrogen required by a owmeter-based system of identical size. More
mportantly, this automated operation maintains the integrity of sensitive parts,uch as semiconductor chips, medical devices or pharmaceutical powders,thout operator monitoring.
or optimal performance, select a pass-through air lock, which functions as aansfer buffer zone.
he Smart Glovebox includes a control system, Automatic RB valve, andlet/outlet ttings for 0.25"-diameter gas line. A removable back wall allowstroduction of large process equipment. Select air lock, work surface andoves separately.
H
F I
13"
9"
Nominal DimensionsA D F H I L M N
12 20 26 18 11.1 10.5 10 11
Smart GloveboxSee
DimensionsAbove
Acrylic(1) Static-DissipativePVC(2)
Polypropylene(4) Polycarbonate 304 Stainless Steel(4) 316 Stainless Steel
Cat. # $/Each Cat. # $/Each Cat. # $/Each Cat. # $/Each Cat. # $/Each Cat. # $/Each
mart Glovebox 3305-30 1,755.00 3305-31 2,654.00 3305-32 2,686.00 3305-33 2,797.00 3305-34 3,278.00 3305-35 4,098.00
ir Lock(3) 3305-38 299.00 3305-39 500.00 3305-40 406.00 3305-41 331.00 3305-42 1,617.00 3305-43 2,022.00(1) Acrylic is damaged by alcohol and other cleaning agents.(2) Includes grounding terminals. Stainless steel work surface is required to prevent scratching the dissipative surface.(3) Standard mounting is on right side (as shown in photo). Includes gas inlet to allow gas purging(4) Includes 120VAC/60Hz uorescent light
Other Accessories
Stainless Steel Work Surface
Recommended for use in plastic chambers to prevent scratching. Price includes
installation (order together with glovebox).Cat. # $/Each Cat. # $/EachFor Smart Glovebox 3305-44 195.00 For Air Lock 3305-45 55.00
Gloves
Unless indicated, all feature a size 9 hand and are for 8" port.Two-piece Accordion Sleeve/ Cat. # $/Pair
Nitrile Glove Combination 1681-91B 256.00
One-piece Neoprene (black) 1689-03 161.00
Hypalon (white, shown above) 1671-10 205.00
Other sizes andmaterials atTerraUniversal.com
Compare! to the price of a glovebox with
DualPurge/NitroWatch control system
7To Order, Call 714-578-6000or Fax 714-578-6020 Vol. 3 No. 15
7/30/2019 Inert systems
10/56
NitroWatch
Humidity Controller
Glovebox Dual Purge System
Universal Air Lock
Powder-Coated Stand
Casters
Changeable Sleeve and Glove Combination
Series 100
PolymerGloveboxes
How to Order:
1. Select the glovebox of the desired size (single ortwin) and material from the ordering table below.
2. Select the Air Lock for your application. TheStandard or Pass-Through Air Lock is forconnection to one glovebox; Universal Air Lockallows connection of two gloveboxes in series.Right-side mounting is standard.
3. Read across the table to select the appropriateaccessories for your system; all prices include
installation. Other optional accessories are listedon the following pages.
H
F I
15"
10"
Single Model (2 Arm Ports)
Twin Model (4 Arm Ports)
A
N
M
D
L
Nominal Dimensions (inches)Type A D F H I L M N
Single 16.75 24 35 25 11.5 10 10 14
Twin 16.75 24 59 25 11.5 10 10 14
ype Series 100 Plastic Gloveboxes*See
DimensionsAbove
Acrylic**** Static Dissipative
PVC**
NondissipativePVC
Polypropylene***
(Dissipative PVC viewingwindow)
Polycarbonate Stainless SteelWork Surface
(prevents scratching)
Cat. # $/Each Cat. # $/Each Cat. # $/Each Cat. # $/Each Cat. # $/Each Cat. # $/Each
ngle Models2 glove ports)
1689-00F 1,828.00 3305-00E 2,728.00 3305-03E 2,222.00 1681-29E*** 2,260.00 1681-31E 2,871.00 1689-11 383.00
win Models
4 glove ports)
1689-16F 2,504.00 3305-10E 4,205.00 3305-11E 3,077.00 1681-30E*** 3,303.00 1681-32E 4,431.00 1681-33 536.00
* Complete with inlet and outlet for gas fittings and relief/bleed valve (order separately).** Includes grounding terminals. The Stainless Steel Work Surface is required with the Static-Dissipative PVC glovebox to prevent
scratching.*** Includes 110VAC, 50/60Hz fluorescent illuminator (for 220VAC/50Hz, add -220 to the part number).*** Acrylic is damaged by alcohol and other cleaning agents.
H
F I
15" 15"
10" 10"
An economical controlled processingenvironment for a wide range ofmanufacturing and testing operations
Dual-gasketed side doors and a fullygasketed back permit introduction of
small and large equipment
Optional gas purge controlsautomatically
3 establish a particle-freeenvironment
3maintain a humidity set pointdown to 0% RH
3minimize system recovery time
10"-diameter glove ports accept awide variety of gloves, includingTerras accordion sleeve and gloveassembly
Available in five materials: acrylic,static-dissipative PVC, nondissipativePVC, polypropylene andpolycarbonate
Terras Series 100 Polymer Gloveboxes provide aclean, low-humidity environment for critical processingoperations in such industries as semiconductor andpharmaceutical manufacturing. Their modular designlets you select the options you need for your application.
Dual side access doors open inward to allow easyparts transfer from inside the chamber. Doors feature
stainless steel reinforcement frames that increase thestructural rigidity of the door by a factor of ve. A built-in LiftLatch securely seals the door without applyinglateral torque that could damage hinges.
8 Thousands of Critical Environment Solutions:www.TerraUniversal.com
7/30/2019 Inert systems
11/56
IonBar (with fan module)Projects a balanced stream of ions for neutralization
of static charges throughout a restricted area. Priceincludes installation inside specied glovebox.Models below are for 120VAC operation.
Cat. # $/Each
22" Long 2005-30 816.0033" Long 2005-32 922.0044" Long 2005-31 1,028.00
Universal Air LockThe Universal Air Lock features dual anges (eachwith gaskets) to permit mounting on either the rightor left side of any Terra plastic glovebox. They alsoallow multiple gloveboxes to be connected in series.Select material compatible with your glovebox(es).Right mounting is standard.
Stainless steel frames now standard on allaccess doors.
Pass-Through Air LockChrome-plated racks accommodate adjustableshelves. In-line double-door construction lets youpass small parts easily into the glovebox; you simplyslide a shelf through the outside door to load partsand then through the inside door to unload themin the chamber. Order shelves separately. Rightmounting is standard.
Cat. # $/Each
Acrylic Shelf 1680-67 19.00
Stainless Steel Shelf 1680-68 72.00
Changeable Sleeve and GloveCombination (for 10"-diameter ports)Can be used with a variety of gloves, allowing youto change glove size or type without changing the
sleeve itself. The convoluted section keeps the sleeveoff the operators arm for better air circulation andcomfort. Supplied with one pair of nitrile gloves(select desired size). Clamps included.
See page 24 for additional gloves.
Glove Size With 18" SleeveCat. # $/Pair
8 1689-46 310.009 1689-47 311.00
10 1689-48 312.00
Stands for Series 100 GloveboxesConstructed of all-welded 2" square tubing.
For Single Models For Twin Models(35"W x 24"D x 30"H) (59"W x 24"D x 30"H)
Cat. # $/Each Cat. # $/Each
Powder-Coated 1681-48 692.00 1681-51 852.00
Steel StandStainless Steel Stand 1681-49 957.00 1681-52 1,272.00
Casters (set of 4, 2 with brakes) 1700-44 234.00
Fixed Rear WallA xed rear wall can be specied in place of the standard removable rear wall.
Cat. # $/Each
1681-58 122.00
Detachable BottomAllows Series 100 glovebox to be lifted for easy placement over large equipment.
Cat. # $/Each
1681-55 358.00
Fans ensure evenion distribution.
Plastic Glove Port (see pg. 27 for other designs)Standard on all Terra gloveboxes; can be retrotted onchamber with 11.25" dia. cutouts. Price for single port.
Cat. # $/Each
Glove Port 1694-52 194.00Port Caps 1694-53 198.00Iris Adapter (see pg 27) 1694-54 294.00
Standard Air Lockhese air locks mount on the right side of theovebox to allow easy pass-through of parts into
nd out of the chamber. They feature a swing-downoor on the front (outside) and a second door that
easy to open by a gloved hand from inside theovebox. One-piece nonadhesive gasket enhances
ealing performance and extends service life. Cappedorts are provided to allow purging of the air lockith nitrogen. Right mounting is standard.
Type Series 100 Air Locks ** (each includes ports for nitrogen purging/bleeding)
SeeDimensions Above
Acrylic* Static DissipativePVC2
NondissipativePVC
Polypropylene3(Dissipative PVCviewing window)
Polycarbonate Stainless SteelWork Surface
(prevents scratching)
Cat. # $/Each Cat. # $/Each Cat. # $/Each Cat. # $/Each Cat. # $/Each Cat. # $/Each
tandard Air Lock 1680-78B 383.00 1680-81B 584.00 1680-84B 473.00 1680-87B 490.00 1680-90B 415.00 1680-69 192.00
ass-Through Air Lock 1680-79B 440.00 1680-82B 644.00 1680-85B 484.00 1680-88B 546.00 1680-91B 467.00 1680-69 192.00
niversal Air Lock 1680-80B 446.00 1680-83B 653.00 1680-86B 490.00 1680-89B 553.00 1680-92B 475.00 1680-69 192.00Acrylic is damaged by alcohol and other cleaning agents. ** All are right mount chambers. Left mount chambers available.
Corresponding Options
Ionizing Bar
(see above)Fluorescent4
IlluminatorPower Strip5
110VAC/60HzDual Purge
System(see page 26)
NitroWatch
(see page 26)AutomaticRBValve(see page 26)
at. # $/Each Cat. # $/Each Cat. # $/Each Cat. # $/Each Cat. # $/Each Cat. # $/Each
005-32 922.00 1681-78 415.00 1681-80 158.00 1603-57 2,715.00 Control: 9500-00A 866.00 1600-60B 94.00005-31 1,028.00 1681-79 561.00 1681-80 158.00 1603-57 2,715.00 Sensor: 9500-02A 515.00 1600-60B 108.00
4 Comes standard on polypropylene models. Models above are 110VAC/60Hz. Add -220 to the catalog number for 220VAC/50Hz power.5 Mounted horizontally on the inside rear wall, 3" from the bottom (specify other position, if desired).
Includes master on/off switch, 15-Amp circuit breaker and 4 outlets.
9To Order, Call 714-578-6000or Fax 714-578-6020 Vol. 3 No. 15
7/30/2019 Inert systems
12/56
A
N
M
D
L
H
F I
8"
Series 200
Negative-PressureGloveboxes
Stainless steel door frames with uniquee profile elastomer gasket increasestructural rigidity, extend service life,improve sealing performance
See facing page for negativepressure configurations
No. 1681-15 with No. 1680-93 air lock
Optionalnegative-pressureair lock
Ideal for drying, degassing, andventilation applications
Clear construction (of acrylic
or polycarbonate) provides fullvisibility of work in progress
Sturdy construction allowssustained negative pressureoperation at 5" WG (29.9" Hg invacuum antechamber)
Vacuum safety valve included toprevent damage to walls or seals
These economical vacuum gloveboxes are designedfor degassing operations, chemical mixing,biological tests, and other processes requiringsustained negative pressure. Each chamber is
fabricated out of solvent-welded 12" transparentmaterial that combines full visibility with light weight,cleanliness and durability. Dual glove ports allow fullaccess to work in progress. Select acrylic for generalapplications, or polycarbonate for resistance to a widerange of chemicals and thermal stress. Equipped witha vacuum safety valve on a standard basis, thesechambers are designed for operations with sustainednegative pressures down to 5" WG (Water Gauge).Dual side access doors open inward to allow easyparts transfer from inside the chamber.
Optional Swing-UpFront Access Panel
Series 200 Negative-Pressure Gloveboxes Corresponding AccessoriesWith Front Access Panel* Without Front Access Panel Vacuum Antechamber
(12" Diameter, see photo below)Negative Pressure
Air Lock ***Acrylic** Polycarbonate Acrylic** Polycarbonate12"L 23"L Vacuum to 5" WG
at. # $/Each Cat. # $/Each Cat. # $/Each Cat. # $/Each Cat. # $/Each Cat. # $/Each Cat. # $/Each
681-13C 2,409.00 1681-14C 4,576.00 1681-15C 2,040.00 1681-16C 3,877.00 1681-63 2,769.00 1681-67 3,350.00 1680-93B 739.00* Cutout Size: 20"W x 10"H ** Acrylic is damaged by alcohol and other cleaning agents.
*** Right mount acrylic airlock. Other styles at TerraUniversal.com
Glove Ports A D F H I L M N
2 16.25 24 35 25 11.5 10 10 14
Other Options:ee gloves on page 26.
tainless Steel Work Surfacerotects the bottom of the chamber against scratching.rice includes installation.
Cat. # $/Each
r Air Lock 1680-69 192.00r Glove Box 1689-11 383.00
love Port CoversO-ring ensures a tight seal. Includes handle for easymoval.
Cat. # $/Each
ort Cover 1694-53 198.00
s Port Adapter 1694-54 294.00
Nominal Dimensions(inches).
or Process Gas
Port
Caps
Vacuum
Control
Pump
Vacuum Antechamber (ordering information above)
Allows drying or degassing at up to one full atmosphere (29.9" Hg).Vacuum Control Module See page 32 for full description. 110VAC, 50/60Hz Cat. # 1681-75 $/Each 2,610.00 220VAC, 50Hz Cat. # 1681-75-220 $/Each 2,610.00
Turnkey Connection Kit 110VAC Cat. # 5400-20 $/Each 1,451.00220VAC Cat. # 5400-20-220 $/Each 1,451.00
Vacuum Pump 110VAC, 50/60Hz Cat. # 7901-00 $/Each 2,411.00 220VAC, 50Hz Cat. # 7901-08 $/Each 2,179.00
10 Thousands of Critical Environment Solutions:www.TerraUniversal.com
7/30/2019 Inert systems
13/56
A
N
M
D
L
H
F I
8"
Series 210
VacuumGloveboxes
1.5"-thick reinforced acrylic wallssupport full vacuum (to 29.9" Hg)
Dual hose barb fittings simplifyconnection to vacuum pump toallow rapid air removal and backfill
with clean, dry process gas
Perfect for anaerobic processing ina low-humidity nitrogen or argonenvironment
Select Trace Oxygen Analyzer tomaintain oxygen levels to 1 ppm
he Series 210 Glovebox supports a wide range ofacuum and degassing operations to full vacuum9.9" Hg).
his vacuum capability also allows removal ofmospheric humidity and oxygen and backll with
process gas, quickly providing a moisture-free,w-oxygen environment for applications as diverse
s Lithium battery manufacturing and anaerobicathogen studies.
or automated vacuum control, select the Vacuumontrol Module, pump and connection kit below. Forutomated backll and purging, select the Dual Purgeystem and Trace Oxygen Analyzer, which work inndem to provide oxygen levels down to 1 ppm(v).
he optional air lock allows transfer of materials into theovebox without breaching the controlled environment.
NominalDimensions
(inches).
Nominal Dimensions (OD includes external support ribs)
A D F H I L M NOD 16 29 32 29.5 12.75 12 11 17.33ID 14.69 22.13 30.25 22.75 10.83 10.13 9.13 13.63
eries 210 Vacuum Gloveboxcludes leveling feet, dual valves for connectionvacuum pump and backll gas source, pressure
auge and relief/bleed valve, which closes duringacuum operations. Order airlock gloves andacuum/purge controls separately.
Max Vacuum Cat. # $/Each
29.9" HG 3305-46 7,287.00
eries 210 Vacuum Air LockLeft Mount Right MountCat. # Cat. # $/Each
3305-48 3305-49 935.00
esigned to support 29.9" Hg vacuum, it includesual vacuum/gas valves and vacuum gauge.
acuum Controls See facing pageurge Controls/Oxygen Analyzer See pages 28 29
How to Attain Extremely Low RH/O2 Concentrations:Vacuum Cycling vs. Purge and Bleed
Vacuum cycling provides the quickest, most economical way to achieve extremely low moisture andoxygen levels inside a glovebox.
Purge-and-bleed displacement relies on a continuous purge of dry process gas (typically, nitrogenor argon) to displace moisture-laded air, which exits through a bleed valve. This process typicallyrequires many hours, consumes a high volume of process gas, and may never achieve very low oxygenconcentrations (below 5 ppm) required in many applications.
Vacuum cycling evacuates ambient airand with it, moisture and oxygeninside a vacuum chamberor glovebox. When air is removed, you simply backll the chamber with process gas until the chamberattains neutral pressure. If needed, this process is repeated until oxygen or moisture concentrationreaches the desired level. Typically, only a few cycles, requiring only a fraction of the gas and time of apurge-and-bleed protocol, are all thats needed to reach single-digit oxygen concentrations.
Once set point levels are attained, close off vacuum valves and use a Dual Purge System and appropriatecontroller (NitroWatch for relative humidity, Trace Oxygen Analyzer for O2 concentration) to maintaindry, anaerobic conditions.
See pages 32 33 for vacuum chambers
No. 3305-46 with airlockand accordion sleeve/glove combination
Front doors close toseal chamber duringvacuum cycles
Glove Portspecial designs and materials,cluding oval stainless steelorts and bag-out ports.
ee page 27.
No. 1672-07 No. 1672-10 No. 1672-27
11To Order, Call 714-578-6000or Fax 714-578-6020 Vol. 3 No. 15
7/30/2019 Inert systems
14/56
Series 310
Stainless SteelNegative PressureGlovebox Designed for rapid removal of oxygen and backfill
with nitrogen or argon to establish anaerobicprocessing environment (see sidebar on page 11)
Continuous-seam welds with radius corners
simplify cleaning and reduce leak rate duringvacuum cycling
Optional vacuum controls accelerate oxygenremoval and backfill with inert process gas
Select Trace Oxygen Analyzer and Dual PurgeSystem to maintain oxygen levels to 1 ppm (seepage 28)
The Series 310 Stainless Steel Glovebox features reinforced 12-gaugestainless steel construction with continuous-seal welds to supportvacuum pressure/inert gas backll cycling that quickly removesatmospheric oxygen and moisture. A tempered safety glass window and
uorescent light provides visibility of the work area.For automated vacuum control, select the Vacuum Control Module,pump and connection kit below. For automated backll and purging,select the Dual Purge System and Trace Oxygen Analyzer, which workin tandem to provide oxygen levels down to 1 ppm(v). Right or left-sideair locks allow transfer of materials into the glovebox without breachingthe controlled environment.
No. 3305-54, shown with optionalmetering valves and vacuum gauge
10"
Nominal DimensionsA D E F G H I M N
6.56 24 28.25 35 11.75 28 28 14.75 14
Series 310 Negative Pressure Stainless Steel Glovebox (Tempered Safety Glass Window)Material With Right-Side Air Lock With Left-Side Air Lock With Dual-Side Air Locks
Cat. # $/Each Cat. # $/Each Cat. # $/Each
304 SS 3305-54A 15,990.00 3305-55A 15,990.00 3305-56A 19,972.00
316 SS 3305-60A 19,464.00 3305-61A 19,464.00 3305-62A 23,836.00
For 220V models, add -220 to the part number. Ordergloves, port covers, and vacuum/purge controllersseparately (full specications at TerraUniversal.com)
Cat. # $/Each
tand (powder-coated steel) 3305-66 510.00ort Cover 1694-53 198.00
ccordion Sleeve/Glove Combo (pair) 1689-47 296.00
Cat. # $/Each
Vacuum Valves (order two/chamber) 5235-09 160.00
Vacuum Gauge (order one/chamber) 5235-10 196.00Glovebox Vacuum Control Module 3305-67 Call TUI
Automates vacuum application to allow vacuum/purgecycling, allowing rapid moisture and oxygen removal.
Captair Pyramid Glovebox
for laboratory and field
investigations! Strong, reliable protection in a mobile and
disposable enclosure
Light simple structure allows for easy assembly Laboratory Certifiedtested for optimal air-
tightness
Top mounted O-ring piece makes for high
mobility and easy storage
The Captair Pyramid is a disposable isolation enclosure that provides excellentprotection in a mobile design.
The enclosure, base, and gloves are made of exible PVC and assembled by highfrequency welding to guarantee laboratory certied air tightness. Arm openingsare equipped with cuffs on arm sleeves for better rigidity during handlings andsupport rods maintain the enclosure upright during manipulations.
Each enclosure is factory tested by inating the enclosure with compressed airat 2.5mm Hg. Test certicate is provided with each enclosure along with serialnumber for traceability.
Cat. # $/Each
3015-00 355.00
Economy Glove BoxesWork
SurfaceSq. Ft.)
Description DimensionsL x W x H
inches (cm) Cat. # $/Each
3.3Glove Box w/ Pass Through,
1 x 134 x 25-7/8 x 24(86.4 x 65.7 x 61)
3308-13 1,575.00
5.8Glove Box w/ Pass Through,
2 x 152 x 25-7/8 x 24
(132.1 x 65.7 x 61)3308-14 1,800.00
8.3Glove Box w/ Pass Through,
3 x 1
70 x 25-7/8 x 24
(177.8 x 65.7 x 61)
3308-15 2,025.00
5.8Glove Box w/ Air Lock,
2 x 152 x 25-7/8 x 24
(132.1 x 65.7 x 61)3308-16 1,890.00
8.3Glove Box w/ Air Lock,
3 x 170 x 25-7/8 x 24
(177.8 x 65.7 x 61)3308-17 2,025.00
Economy Glove Boxes Clear polycarbonate has optimum
visibility and strength
Effective and affordable isolation
Ideal for anaerobic work (when
equipped with airlock) Available in several sizes with single
door, side-entry pass-through, ordouble door side-entry air lock1 x 1 Glove Box 3308-13
12 Thousands of Critical Environment Solutions:www.TerraUniversal.com
7/30/2019 Inert systems
15/56
Shown with Glove Ports Cat. # 2003-37,$261.00/each. See page 20 for gloves.
Shown with Iris Ports Cat. # 1685-93,$421.00/pair. See page 19.
nterchangeable access ports let you configure theoptimal enclosure for your application
Solid Panels Access DoorsGlove Ports Microscope BellowsIris Ports Custom Interface Modules
hese Mini-Environment Equipment Enclosures provide a controlled
nvironment for delicate process equipment. Each includes dual frontoors for easy access. The bottomless design allows convenientlacement over equipment; select the optional spill tray if a bottom
s required. Standard size: 49"W x 25"D x 30.25"H (without lter/fanmodule). Door opening: 22.38"W x 22.25"H (for each door).
Mini-Environment
Equipment Enclosure
pill Tray
"H tray safely contains chemical spills and is easy to clean.Cat. # $/Each
ainless steel 2003-35 492.00olypropylene 2003-36 492.00
onizing Bar
ee page 25 for installation information
22"L (4 emitters) 2005-06A 484.0044"L (8 emitters) 2005-07A 696.00
Microscope Bellows Cat. # $/Eachee page 19; indicate desired location. 1681-53 234.00
apor-Sealed
luorescent Illuminator 2400-21 364.007"L x 5"W x 3"H; dissipative PVC housing. 120VAC, 60Hz. Otheroltages and special lighting available, including germicidal UV.
No. 2003-20 withoptional filter moduleand side doors.
Temperature-controlled modelsavailable in sizes up to 120"Wsee page 27.
Filter/Fan Units (120VAC,
50/60Hz)
Includes 99.99% efcient HEPAlter. Adds 13" to height. Exit
slots provided for air release.Cat. # $/Each
6601-24-H 730.00
Mini-Environment Enclosures Corresponding Side Access Door*Material
Cat. # $/Each
Right Side Left Side
Cat. # $/Each Cat. # $/Each
Acrylic 2003-20 2,422.00 2003-25 240.00 2003-30 240.00
Static-Dissipative PVC 2003-21 3,142.00 2003-26 266.00 2003-31 266.00Polycarbonate 2003-22 3,217.00 2003-27 277.00 2003-32 277.00* Front access doors included (as in photos above). Side doors feature
stainless steel frame and chrome-plated lift latch. Opening: 15"W x 21"H
. Mini-Environment Equipment Enclosure: Incorporates closed-loopfiltration system.
. Mini-Environment Equipment Enclosure: Incorporates humidificationand dehumidification modules and process gas heater/cooler tomaintain stable %RH and temperature levels.
. Glovebox with Perforated Bottom: Accommodates recirculation offiltered process gas
. Polypropylene Glovebox: includes 0.5"-thick lead base and rearstorage shelves
. Glovebox with Recirculation System: FilterMate removes particles andvapors from recirculated, low-oxygen environment
C D E
A
Call to Discuss Your Unique Requirements!
B
13To Order, Call 714-578-6000or Fax 714-578-6020 Vol. 3 No. 15
7/30/2019 Inert systems
16/56
Series 300
Stainless Steel GloveboxesProvides a clean, controlled environment for manufacturingprocesses in semiconductor, pharmaceutical, and otherindustries
Transparent dissipative PVC window affords full view ofprocessing area
Side flanges simplify insertion/removal of process
equipment and allow easy addition of ovens and air locks10"-diameter ports accept a wide variety of gloves andaccommodate port covers and iris adapters
Select single model (with two glove ports) or twin model(with four glove ports)
he Series 300 Stainless Steel Controlled Atmosphere Chamber provides aermetically sealed environment for such manufacturing operations as resistanceelding of semiconductor hybrids, parts degassing, temperature and humiditysting, and chemical mixing in a nonreactive environment.
DewWatch Humidity Controller (see page 26)
Air Lock
Glovebox Dual Purge System (see page 26)
4-Port Twin Chamber
(No. 1694-04B)
ass-Through OvenNo. 5401-00A;ee page 23)
Vacuum/Nitrogen Pump
Elastomer seal forsuperior performance
Air Lock Provides Convenient Access.Shown with optional viewing window.
See page 24.
Cleanroom ChairNo 1012-41$454.00
Cleaner, More Durable
Stainless Steel Latches
Terras all-stainless steel latches, standard on allglovebox air locks, eliminate scratching, corrosion and
contamination common with plated latches.
14 Thousands of Critical Environment Solutions:www.TerraUniversal.com
7/30/2019 Inert systems
17/56
Stainless Steel Glovebox
Specifications & Ordering Informationoor Openings: 121/2" x 121/2" with gasketed doors
supplied with air locks (see orderinginformation below); doors open inward.
rm Ports: 10" round with ange for connectingglove assembly. See page 25
as Ports: Fittings for 1/4" gas inlet and systempressure lines; port for Automatic RBValve. Appropriate adapter inserts aresupplied for any Terra gas systemsordered.
ight: Fluorescent. (select voltage below)Window: Static-dissipative PVC
10"10"
10"
Stands for Series 300 GloveboxesConstructed of all-welded 2" square tubing. Select oven support for use with Terras High-Performance Pass-Through Oven(No. 5401-00, see page 23). All stands raise chambers 28.75" off of oor (add 3" for casters).
No. 1690-03
Other Optional Accessories
Cat. # $/Each Page
lovebox Dual Purge System 1603-57 2,715.00 23
itroWatch 9500-00A 866.00 26itroWatchSensor 9500-02A 515.00 26
tainless Steel Automatic RBValve 1606-60 180.00 26Required for operation with Dual Purge System
ccordion Sleeve/Glove Combination 1689-47 311.00 2418"L, with size 9 gloves (pair)
ight-Side Access Door 1685-94-300 902.00
eft-Side Access Door 1685-96-300 902.00
igh-Performance Vacuum OvenSee pg. 23 for specifications and ordering information.
All dimensionsin inches
Fans ensure evenon distribution.
IonBar (with fan module)Projects a balanced stream of positive ions forneutralization of static charges throughout a restrictedarea. Price includes installation inside specied
glovebox. Models below are for 120VAC operation.Cat. # $/Each22" Long 2005-30 816.0033" Long 2005-32 922.00
44" Long 2005-31 1,028.00
Powder-Coated Steel 304 Stainless Steel
Chamber Only Chamber and Oven Chamber Only Chamber and OvenCat. # $/Each Cat. # $/Each Cat. # $/Each Cat. # $/Each
For Single Models (2 ports) 1690-03 546.00 5401-01 882.00 1694-09 1,069.00 1694-11 1,614.00
For Twin Models (4 ports) 1690-04 663.00 5401-02 939.00 1694-10 1,308.00 1694-12 1,860.00
ModelGlovePorts A D E F G H I M N
Single 2 16.5625 24 28.25 35 11.75 28 16 14.75 14
Twin 4 16.5625 24 56.75 59 11.75 28 16 14.75 14
Cat. # $/Each
Heavy-Duty Casters (set of 4, 2 with brakes) 1700-44 234.00
Series 300 Gloveboxes* Corresponding Air Locks**
Model Glove Ports 120VAC 220VAC Right Side Left Side
Cat. # $/Each Cat. # $/Each Cat. # Cat. # $/Each
Single 2 1694-01B 5,802.00 1694-01B-220 5,802.00 1702-10C 1702-11C 3,206.00
Twin 4 1694-02B 8,998.00 1694-02B-220 8,998.00 1702-10C 1702-11C 3,206.00* 304 stainless steel with static-dissipative PVC viewing window
** Multiple air lock sizes available; see page 22
Plastic Glove Port, Cover, and Iris Adapter10"-diameter port is standard on all Terra gloveboxes. Order covers and irisadapter separately (see page 27).
Cat. # $/Each
A. Replacement Glove Port 1694-52 194.00 B. Glove Port Cover 1694-53 198.00
C. Iris Adapter 1694-54 294.00
A B C
Series 300
Oval and stainlesssteel portssee page 27.
15To Order, Call 714-578-6000or Fax 714-578-6020 Vol. 3 No. 15
7/30/2019 Inert systems
18/56
Series 400
Stainless Steel Glovebox
Roomy 304 stainless steel chamber provides amplespace for large processing equipment
Interfaces with Vacuum Antechamber for vacuumoperations down to 29.9" Hg
Optional gas purge controls automatically maintain ahumidity set point down to 0% RH/0.5 ppm(v) H
2O
hese chambers are a larger version of the Series 300 chambers listed on theeceding pages.
addition to all of the features of the Series 300 models, these chambers alsocommodate Terras Vacuum Antechamber, which supports vacuums down29.9" Hg for a wide range of operations in many industries. Their double-
asketed side ange allows easy insertion of large process equipment into theork chamber and easy mounting of the antechamber, a vacuum/nitrogen oven,a standard air lock.
pecifications: Series 400 Gloveboxoor Openings: 12" x 12" gasketed doors supplied with air locks
(see ordering information on facing page); doors open inward.
m Ports: 10" round with ange for connecting glove assemblyindows: Static-dissipative PVC
Specifications: Vacuum AntechamberConstruction: 6061 Aluminum (with brass ttings); or stainless steel (with
stainless steel ttings); high-vacuum design; TIG weldedstructure
Dimensions: 15" dia. x 24" longTray Dimensions: 12" x 23"; extends to 14" beyond opening for loadingDoors: Single center-clamped, O-ring sealed, counterbalanced,
vertical travel; stainless steel on both modelsVacuum Capability: 1 x 10-3 TorrVacuum Gauge: 21/2" compound Bourdon tube dial typeConnections: 1" evacuation valve, 1/4" backll valve, 1/4" IPS plug
Elastomer seal forsuperior performance
Order Air Locks fromtable on the next page
Model shown: Single Chamber (Cat. No. 1694-13) with Dual Purge System, Vacuum Antechamber and Vacuum Control Module
Dual Purge System
VacuumControlModule
Vacuum Antechamber
Series 400 Chambers (304 Stainless Steel)Model Glove Ports Cat. # $/Each
Single 2 1694-13B 9,529.00
Twin 4 1694-14B 14,776.00
16 Thousands of Critical Environment Solutions:www.TerraUniversal.com
7/30/2019 Inert systems
19/56
H
F I
E
G AirLock
10"10"
A
M
D
M
H
F 24"
E
G
15"
Vacuum
Antechamber
10"
All models include a 120VAC/60Hz fluorescent illuminator.For 220VAC/50Hz power, add -220 to the catalog number.For electropolishing of any stainless steel component, add-2 to the catalog number and 30% to the price.All dimensions in inches.
tands for Series 400 Gloveboxesonstructed of all-welded 2" square tubing, theseands are specially designed to support Series 400oveboxes. Select powder-coated (white) steel orainless steel stands, with or without rubber casters.
eavy-Duty Casters Cat. # $/Eachet of 4, 2 with brakes) 1700-44 234.00
Other Optional Accessories
For chamber only
For chamber and vacuum
antechamber
For chamber and oven No. 5401-00
For chamber, vacuum antechamber,
and oven No. 5401-00
Cat. # $/Each Page
lovebox Dual Purge System 1603-57 2,715.00 23
itroWatch 9500-00A 866.00 23itroWatchSensor 9500-02A 515.00 23
tainless Steel Automatic RBValve 1606-60 180.00 23Required for operation with Dual Purge System
ccordion Sleeve/Glove Combination 1681-91B 269.00 2018"L, with size 9 gloves (pair)
IonBar (with fan module)Projects a balanced stream ofpositive ions for neutralization ofstatic charges throughout a restrictedarea. Price includes installationinside specied glovebox. Modelsbelow are for 120VAC operation.
Fans ensure evenion distribution.
Plastic Glove PortStandard on all Terra gloveboxes; can be retrotted onchamber with 11.25" dia. cutouts. Price for single port.
Cat. # $/Each
1694-52 194.00Port Covers 1694-53 198.00Iris Adapter 1694-54 294.00
Bag-In/Bag-out Ports See page 4
Cat. # $/Each
22" Long 2005-30 777.0033" Long 2005-32 878.0044" Long 2005 -31 979.00
Glove Ports A D E F G H I M N
2 27 33 28.25 33 12.9325 33 16 12 14
4 27 33 56.5 60 12.9325 33 16 12 14
Vacuum Antechamber (see below) Air Lock** Vacuum/Nitrogen Ovens (left side mounting standard)
Aluminum** Stainless Steel** High Performance Pass-Through Oven* (see pg. 23)
Modular Oven(see pg. 23)
ight Mount Left Mount Right Mount Left Mount Right Mount Left Mount Right Mount Left Mount Right Mount Left Mountat. # Cat. # $/Each Cat. # Cat. # $/Each Cat. # Cat. # $/Each Cat. # Cat. # $/Each Cat. # Cat. # $/Each
5400-01 5400-03 6,689 5400-04 5400-05 8,206 1698-01C 1698-02C 2,989 5401-12A 5401-00A 17,268 9602-30A 9602-03A 5,564* Requires support stand for safe operation (order below). For 220VAC operation, add -220 to the part number.
** Prices for left-mount and right-mount models are the same. Optional 7"W x 9.5"H safety glass viewing windowCat. # 1702-02
304 Stainless Steel Powder Coated Steel 304 Stainless Steel Powder Coated SteelCat. # $/Each Cat. # $/Each Cat. # $/Each Cat. # $/Each
For Single Models (2 ports) 1694-15 1,204.00 1694-17 546.00 1694-19 1,760.00 1694-21 818.00
For Twin Models (4 ports) 1694-16 1,279.00 1694-18 611.00 1694-20 1,872.00 1694-22 367.00
304 Stainless Steel Powder Coated Steel 304 Stainless Steel Powder Coated SteelCat. # $/Each Cat. # $/Each Cat. # $/Each Cat. # $/Each
For Single Models (2 ports) 1694-23 1,988.00 1694-25 965.00 1694-27 2,422.00 1694-29 1,236.00
For Twin Models (4 ports) 1694-24 2,103.00 1694-26 1,013.00 1694-28 2,707.00 1694-30 1,275.00
Other designssee page 27
17To Order, Call 714-578-6000or Fax 714-578-6020 Vol. 3 No. 15
7/30/2019 Inert systems
20/56
Series 500
Full-ViewGlovebox
Transparent front and rear panelsensure full visibility of work inprogress
Opposing glove ports allow
convenient, dual-side access Large chamber size accommodates
bulky process equipment
Rugged 304 stainless steel top,bottom and sides create a durable,chemical-resistant enclosure
Select access doors or air locks toallow convenient parts transfer
The Series 500 Glovebox offers several convenientfeatures that reduce the cramped, claustrophobicfeeling operators often experience: a spacious
processing chamber, transparent full-view windows,and dual-side access to work in progress.
Select windows of polycarbonate or static-dissipativePVC, which helps control surface charges and theparticles they attract. All models below include anexternally mounted uorescent illuminator. Terras10" -diameter glove ports allow wide arm motion foreasier parts manipulation; select gloves separately.Available with a full line of options, including side airlocks or access doors for easy parts transfer, stands,and humidity control systems (see below).
Twin Series 500 chambers.
Glove A D E F H I M N
2 26 36 14.75 48 30 16 14.75 12
4 26 36 14.75 96 30 16 14.75 12
A
M
D
E
H
F I
N
17"
10"
eries 500 Full-View Gloveboxes* Air Locks** Access Door***Model Static-Dissipative
PVC PanelsPolycarbonate
PanelsRightMount
LeftMount
RightMount
LeftMount
Cat. # $/Each Cat. # $/Each Cat. # Cat. # $/Each Cat. # Cat. # $/Each
Single 1694-31A 7,006.00 1694-33A 6,805.00 1702-12C 1702-13C 3,206.00 1694-45-500 1694-46-500 902.00Twin 1694-32A 12,959.00 1694-34A 10,752.00 1702-12C 1702-13C 3,206.00 1694-45-500 1694-46-500 1,073.00
* All models are 120VAC, 50/60Hz. For 220VAC, add -220 to the part number.** Mounted on either side panel; see page 22 for details.
*** Mounted on either side panel; 18"W x 20"H.
StandsAll-welded 2" square tubing, each stand providesoptimal support for its corresponding chamber.
Optional Accessories (see also facing page)
Air LocksAir locks minimize nitrogen loss andcontamination while parts are introducedor removed. BioSeal design featuresnoncontaminating polyurethane seals.Standard units on ordering chart abovecome with solid stainless steel door(select window below).
Cat. # $/Each
Viewing Window 1702-02 442.00Tempered Glass, 7"W x 9.5"H
Stainless Steel Powder-Coat SteelCat. # $/Each Cat. $ $/Each
For Series 500 ChambersSingle 1694-39 1,919.00 1694-40 1,142.00Twin 1684-75 2,007.00 1684-76 1,217.00
For Series 600 Chambers 9670-02 1,256.00 9670-03 576.00
18 Thousands of Critical Environment Solutions:www.TerraUniversal.com
7/30/2019 Inert systems
21/56
Polycarbonate or tempered glassfront window allows full view ofprocessing operations
Stainless steel frame lends strengthand chemical resistance
Select access doors or air locks forconvenient parts transfer
Full range of optional accessoriesincludes gloves, filtration modulesand process gas controllers forautomatic humidity control
ull-front viewing windows on these chambers provideomplete visibility of the processing environment andinimize the claustrophobic sensation created by otheroveboxes. Select chemical-resistant polycarbonater tempered glass; all units come with a uorescent
uminator and roomy 10"-diameter glove ports (orderoves separately).
Series 600
Front-ViewGlovebox
No. 9670-00, shown with right-side air lock.
A
M
D
E
H
F I
N
17"
10"
Optional Accessories (see also facing page)
Series 600 Full-View Gloveboxes* Air Locks** Access Door***
TemperedGlass Panels
PolycarbonatePanels
RightMount
LeftMount
RightMount
LeftMount
at. # $/Each Cat. # $/Each Cat. # Cat. # $/Each Cat. # Cat. # $/Each
9670-01A 10,023.00 9670-00A 8,719.00 1702-14C 1702-15C 2,989.00 1694-45-600 1694-46-600 1,073.00* All models are 120VAC, 50/60Hz. For 220VAC, add -220 to the part number.
** Mounted on either side panel; see page 22 for details.*** Mounted on either side panel; 18"W x 20"H.
Sleeve and Glove
Combination
Neoprene convoluted sleeveprovides rigidity that enhancescomfort and resists blowback in apressurized chamber. Supplied withone pair of nitrile gloves of speciedsize. For 10"-diameter glove ports.See page 26 for other gloves.
Glove Size Cat. # $/Pair
8 1689-46 310.00
9 1689-47 311.0010 1689-48 312.00
RH/Temperature Data
Logger
USP device provides a convenient recordof storage conditions. Records data atselected intervals and downloads tocomputer for display in several formats.
Cat. # $/Each
9500-10 195.00
See pages 28 29 for TerrasHumidity Control Systems
Glove A D E F H I M N
2 24 29 12 37.5 39 16 12 14
Now with10"-diameterports for widerrange of motion!
Optional portcover sealsagainst standardport to allowconvenient glovereplacement withoutcompromising theinternal environment
Optional iris portseals againststandard port foreasy access byoperators withgloved hands
See stands on facing page.
t. # $/Each
694-53 198.00
t. # $/Each
694-54 294.00
19To Order, Call 714-578-6000or Fax 714-578-6020 Vol. 3 No. 15
7/30/2019 Inert systems
22/56
Compounding
Aseptic IsolatorHelps meet USP requirements
Low-noise, low-vibration filter/fan unit providescontinuous vertical flow of 99.99% particle-free air tomeet Class 100 (ISO 5) cleanliness standards
304 Stainless steel enclosure is easy to clean anddisinfect (see Cleaning Kit on facing page)
Large, ergonomically sloped static-dissipative PVCviewing window tilts open to allow insertion of fillingmachines or other large process equipment
Antechamber features swing door for easy insertion/removal of IV bags and other small items
Magnehelicgauge monitors internal positive pressureinside the enclosure that prevents infiltration ofcontaminants
Includes IV rod and externally mounted fluorescentilluminator
Waste port available for disposing of materials throughglovebox floor or side
Includes IV rod
Swing-upaccess doorand isolatedantechamber
Single-pass flow-through design
Gloves See page 26
his laminar ow glovebox provides an easy-to-clean environment for performingerile pharmaceutical preparations. Its HEPA ltration module provides aositive pressure of 99.99% particle-free air inside the work area to meet ISO 5quirements. A separate antechamber allows introduction of materials without
ontaminating the main work area. Includes polyurethane exit lter (HEPA exitter available). Select gloves for 10"-diameter ports from page 26. Material: 304ainless steel with tempered glass window. Dimensions: 50"W x 30"D x 51"H.
Cat. # $/Each
ompounding Aseptic Isolator 2900-46C 6,819.00orresponding Stand
304 Stainless Steel 1694-80 1,036.00
V-RAY Ultra-Violet Sterilization Modules
Economical, fast-acting systems use UV-C light to kill a broadspectrum of bacteria, viruses, and mold spores (details atTerraUniversal.com)
An effective, convenient alternative to manual alcoholsterilization of difficult-to-reach isolator interiors
Three lamp sizes (21", 33" and 61") accommodate mostaseptic isolators
Can be permanently mounted or installed with quick-connectfittings when sterilization is required
These economical, ETL-listed sterilization modules are ideal for glovebox isolators andother conned, difcult-to-clean chambers. Their long-lasting, low-mercury lamps canbe installed in most Terra stainless steel chambers, including BioSafe Gloveboxesand Compounding Aseptic Isolators. Call for pricing on a mounting system that
accommodates your operation. Cat. #21" lamp 3305-9033" lamp 3305-91
61" lamp 3305-92
99+% kill rate for common bacteria andviruses within 2 minutes!
See facing page for Mini-Environment
Cleaning Kitideal for alcohol disinfection.Hydrogen peroxide sterilization systemsalso availablecall Terra for congurations.
20 Thousands of Critical Environment Solutions:www.TerraUniversal.com
7/30/2019 Inert systems
23/56
Mini-Environment
Cleaning KitsThe kits include an Isolator Cleaning Tool(18" and 24" handles, 1 polyester foampad, and 6 mop covers), one productionbag of dry and pre-wetted wipers and aninformational brochure with instructions on
how to clean your isolators.
BioSafe
Gloveboxes
Smooth, ultra-clean surfaces eliminate germ traps,simplify cleaning and disinfection
Continuous-seam interiors create a sealed chamber
Tempered glass or polycarbonate viewing windowsallow full view of chamber
Includes fluorescent illuminator (UV sterilization bulbsavailable)
Optional access panel available for equipment transfer
Custom configurations availablecall to discuss yourrequirements!
Smooth interior withradius corners for easysterilization!
Available withsloping bottomand drain valvefor disinfectantwash-down
Rating Cat. # $/Each
ISO Class 3-5 5604-65 198.00
BioSafe Glovebox All models are 120VAC; 220VAC models availablePosition Window
Material304 Stainless Steel 316 Stainless Steel
Single
(37.5"W x 29"/24"D x 39"H)Twin
(69"W x 29"/24"D x 39"H)
Single
(37.5"W x 29"/24"D x 39"H)Twin
(69"W x 29"/24"D x 39"H)
Cat. # $/Each Cat. # $/Each Cat. # $/Each Cat. # $/Each
Glovebox with Right-Side Air Lock*Polycarbonate 9670-16B 18,764.00 9670-19B 23,750.00 9670-48A 26,417.00 9670-51A 33,497.00
Safety Glass 9670-17B 19,920.00 9670-20B 24,892.00 9670-49A 28,065.00 9670-52A 35,060.00
Glovebox with Left-Side Air Lock*Polycarbonate 9670-22B 18,735.00 9670-25B 23,785.00 9670-54A 26,417.00 9670-57A 33,497.00
Safety Glass 9670-23B 19,937.00 9670-26B 24,892.00 9670-55A 28,065.00 9670-58A 35,060.00
Glovebox with Dual-Side Air Locks*Polycarbonate 9670-28B 23,495.00 9670-31B 28,711.00 9670-60A 33,288.00 9670-63A 40,368.00
Safety Glass 9670-29B 24,663.00 9670-32B 29,819.00 9670-61A 34,936.00 9670-64A 41,931.00
* Air lock dimensions: 16"W x 16"D x 16"H
ach chamber includes pair of 10"-diameter glove ports (twin models includewo pairs). Order gloves separately on page 26.
For Single For TwinCat. # $/Each Cat. # $/Each
owder-Coat Stand 9670-41 597.00 9670-43 715.00
tainless Steel Stand 9670-40 1,256.00 9670-42 1,378.00
emovable Panel
lows you to remove and reseal front viewing window to allow transfer of largeocess equipment. Poured polyurethane BioSeal is easy to clean and sterilize.
Cat. # $/Each
Single Chamber 9670-35 2,625.00Twin Chamber 9670-36 3,150.00
Shown with optionalfiltration module(see page 31)
Ideal for hard-to-reachinterior surfaces!
21To Order, Call 714-578-6000or Fax 714-578-6020 Vol. 3 No. 15
7/30/2019 Inert systems
24/56
nsulated
Gloveboxes2" of polyurethane insulation ensurestable, efficient temperature controlover a wide operating range (-25F to+140F/-32C to +60C)
Provide stable operating temperaturesin critical applications
304 stainless steel chamber provides anoncontaminating, durable, chemical-resistant enclosure
Double-glazed polycarbonate viewingwindows provide visibility of work inprogress (select partial or full-viewdesign)
Includes fluorescent illuminator
See facing page for Terras ConstantTemperature Control System
hese double-wall, insulated chambers boost thermalciency to create stable process temperatures andecrease the cost of heating and cooling cycles.
oth include two 10"-diameter ports, providingmple space for arm motion inside gloves (orderoves separately). Select Full-View or Partial-Viewont panels. Both models include double-glazedolycarbonate windows.
10"
Outside Dimensions (subtract 4" for I.D.)Front Panel A D E F G H I M NFull Window 28 33 37 41 35 43 14 12 Partial Window 31 37 28.25 37 12.81 39 14 12 14
Special sizing and configurations available call to discuss your requirements.
nsulated Gloveboxes Air Lock* Stands
Window 120VAC 220VAC Right Side Left Side
Cat. # $/Each Cat. # $/Each Cat. # Cat. # $/Each Cat. # $/Each
ull Window 1696-05 14,102 1696-05-220 14,102 1696-07A 1696-08A 2,853 1696-11 590.00
artial Window 1696-06 14,459 1696-06-220 14,459 1696-09A 1696-10A 2,853 1696-12 569.00
* Air locks feature double-wall constructions but no insulation. Inside dimensions: 12" x 12" x 12"Order desired gloves and temperature control module separately.
Partialwindowmodel
Fullwindowmodel
Plastic Glove Port, Cover, and Iris Adapter10"-diameter port is standard on all Terra gloveboxes. Order covers and irisadapter separately.
Cat. # $/Each
A. Replacement Glove Port 1694-52 194.00 B. Glove Port Cover 1694-53 198.00
C. Iris Adapter 1694-54 294.00
A B C
22 Thousands of Critical Environment Solutions:www.TerraUniversal.com
7/30/2019 Inert systems
25/56
Heating & Cooling
Modules
Continuous Low Flow
Intermittent High Flow
Insulated Linefor Heated Gas
N2 InProcess
Gas Heater
GasOut
DualPurge
NitroWatch
Double-Wall, Insulated Chamber
B
B. Process Gas Heatererra Universals Process Gas Heater raises the temperaturethe process gas up to 350F (see performance graphs).
he thermostatic control ensures temperature stability. Itsolated heating system provides controlled heating withoutrect contact with the process gasguaranteeing safe,oncontaminating operation with potentially explosiveases. The smart programmable temperature controller
onitors and responds to gas temperature measured ate outlet, continuously adjusting the temperature proled guarding against temperature overshoot.
Cat. # $/Each
20VAC/60Hz 4320-00 3,574.0020VAC/50Hz 4320-00-220 3,574.00
A. Constant Temperature
Control SystemMaintains a constant temperaturebetween -25F and 120F (-32Cand 49C)
Includes CFC-free refrigeration
system and heating module
Select insulated chambers forenergy-efficient temperaturecontrol above or blow ambient(see facing page)
his system consists of compressor/condenser unitd heater, mounted inside a 304 stainless steel
ousing, and an evaporator cooler, mounted insidee chamber. The closed-loop refrigeration unitperates with an environmentally friendly coolantFC free) and uses a RTD sensor, which providesntinuous temperature display and overtemperatureotection with an internal bypass to preventmperature overshoot.
he systems evaporator cooler, mounted in anuminum housing, includes an integral fan thatcirculates process gas inside the chamber throughe cooling coils. Standard controller allows user totablish a constant temperature set point. A PLCntroller, programmed for multiple temperaturecles, is available on an optional basis.
Constant Temperature Control SystemTemperature
RangeCompressor
SizeBTU/HourCapacity
110VAC, 50/60Hz 220VAC, 50/60HzCat. # $/Each Cat. # $/Each
-10 to 120F 0.5HP 3800 1694-76 15,120.00 1694-76-220 15,120.00-25 to 120F 0.75HP 5900 1694-78 18,270.00 1694-78-220 18,270.005 to 120F 0.5HP 3800 1694-75 14,070.00 1694-75-220 14,070.005 to 120F 0.75HP 5900 1694-77 17,220.00 1694-77-220 17,220.00
Shown on Series 300glove box. See facingpage for insulatedchambers.
Chilled Purged Gas
DualPurge
NitroWatchN2 In
Continuous Low Flow
Intermittent High Flow
Closed-Loop,CFC-Free Coolant
Double-Wall, Insulated Chamber
Refrigeration
Module
Application Note:Dry nitrogen purgingis recommended for low-temperatureapplications in order to avoid condensationinside the process chamber.
Glove Portspecial designs and materials,cluding oval stainless steelorts and bag-out ports.
ee page 27.
No. 1672-07 No. 1672-10 No. 1672-27
23To Order, Call 714-578-6000or Fax 714-578-6020 Vol. 3 No. 15
7/30/2019 Inert systems
26/56
Stainless Steel
Air Locks
Pneumatic Door
Air Locks
Optional mechanicalinterlocks:
Cat. # 1702-03, $460
Cleaner, More Durable
Stainless Steel Latches
Terras all-stainless steel latches,standard on all glovebox airlocks, eliminate scratching,corrosion and contaminationcommon with plated latches.
Shown with optional7"W x 912"H tempered glass viewing
window (Cat. # 1702-02, $421)
Elastomer seal for superior performance
Shown with custom rear-wall installation
Foot pedal operation eliminatesawkward reachingperfect for largechambersThis pneumatic access door eliminates clearancerequirementsgiving you full use of every squareinch of valuable glovebox space. The pneumaticassembly and all moving parts are positioned outsidethe glovebox in a separate housing. Can be conguredfor rear chamber access or air lock access.
Door sealed in housingoutside chamber
Glovebox Air Locks*
Dimensions (ID): 12"W x 12"H x 14"D 12"W x 12"H x 16"D 16"W x 16"H x 16"D 12"W x 20"H x 16"D
RightMount
Left Mount RightMount
Left Mount RightMount
Left Mount RightMount
Left Mount
or Glovebox Cat. # Cat. # $/Each Cat. # Cat. # $/Each Cat. # Cat. # $/Each Cat. # Cat. # $/Each
Series 300 (page 12) 1702-10C 1702-11C 3,206 1681-17C 1681-18C 3,456
Series 400 (page 14) 1698-01C 1698-02C 2,989 1681-19C 1681-89C 3,456 1702-18C 1702-19C 4,591 1702-37C 1702-38C 3,914
Series 500 (page 16) 1702-12C 1702-13C 3,206 1681-93C 1681-94C 3,456 1702-31C 1702-32C 4,591 1702-39C 1702-40C 3,914
Series 600 (page 16) 1702-14C 1702-15C 2,989 1681-95C 1681-96C 3,456 1702-33C 1702-34C 4,591 1702-41C 1702-42C 3,914Part numbers are for an air lock of the specied size with a ange for right or left mounting to the Terra glovebox indicated.(No part numbers in a column indicates that the air lock does not t that glovebox).
Air Lock with Pneumatic Door
Corresponding Glove-box
Right Side Left Side
Cat. # $/Each Cat. # $/Each
For Series 300 Chamber 1530-70 6,878.00 1530-74 6,954.00
For Series 400 Chamber 1530-71 7,031.00 1530-75 7,109.00
For Series 500 Chamber 1530-72 7,184.00 1530-76 7,260.00
For Series 600 Chamber 1530-73 7,335.00 1530-77 7,414.00
Smooth internal surfaces and all-welded seamsfor easy cleaning and disinfection
No-lip design maximizes usable space
Non-contaminating polyurethane Bio-Seal
Terras improved air lock design ensures a sealed environment that
minimizes nitrogen loss and contamination. Knife-edges alongthe chamber seat against recessed polyurethane seals. Double-wall stainless steel construction, with heavy-duty door latches andhinges, ensures a long service life.
Select optional safety glass viewing window on the access side.Mechanical interlocks are also available to prevent the chance ofcross-contamination. Includes provisions for purging with nitrogenor other process gas, and for installation of an Automatic RB(Relief/Bleed) valve.
24 Thousands of Critical Environment Solutions:www.TerraUniversal.com
7/30/2019 Inert systems
27/56
Pass-Through Ovens &
Access Modules
A. High-Performance Pass-Through Oven
eatures double doors for such pass-through operations as resistanced seam welding of hybrids and many other microelectronic
ackages. Door anges hold circulating water to speed up theoling of the chamber during cycling operations. These ovensquire a support platform when mounted on a chamber; select a
erra stand with oven support. Select ttings kit for operation withull-Vacuum Control Module.
emperature range: Up to 300C continuous, 350C intermittentegree of vacuum: Up to 10-6 Torr and higher; helium mass
spectrometer tight
Right Mount Left MountCat. # Cat. # $/Each
0VAC/60Hz 5401-12A 5401-00A 17,268.000VAC/50Hz 5401-12A-220 5401-00A-220 17,268.00cuum Control Fittings Kit 5400-22 1,451.00rder Vacuum Controller below)
B. Modular Vacuum/Nitrogen Ovenhis unit provides a compact, economical alternative to Terras largeracuum/Nitrogen Oven. It is ideal for R&D, lab, and productionperations.
acuum range: Atmosphere to 10 microns, with adequate pumpemperature range: 10C to 149Capacity: .48 cu. ft.
Right Mount Left MountCat. # Cat. # $/Each
0VAC/60Hz 9602-30A 9602-03A 5,564.000VAC/50Hz 9602-30A-220 9602-03A-220 5,564.00
cuum Control Fittings Kit 5400-23 1,451.00rder Vacuum Controller below: see page 27 for description.)
C. Vacuum Control Module
ontrols vacuum pump operation to maintain desired vacuum levelside the Series 400 vacuum antechamber or pass-through oven.ee page 16.
Cat. # $/Each
0VAC 1681-75 2,610.00
0VAC 1681-75-220 2,610.00
D. Vacuum Antechamberupports vacuum to 29.9" Hg. Available in plastic for Series00 Glovebox (see page 10) and aluminum or stainless steel foreries 400 Glovebox (see page 16).
. Bellows Eyepiece Interfacehis cut-out is sealed with a bellow-type diaphragm to allow viewing
a stereo microscope positioned inside any of Terras stainlesseel gloveboxes. Standard cut-out size is 8"W x 6"H. Specify sized location.
Cat. # $/Each
1681-53 234.00
. Flanges and Pipe Fittings
erra provides a wide range of pipe and ange ttings, includingi-Clover Flange Adapters, to accommodate glovebox feed orntilation ports. Call to discuss your requirements. Weld-On and Bolt-On Configurations, all diameters
304/316 SS, brass and other materials PTFE and other linings
Heating to 300C
Heating to 149C,see TerraUniversal.com
for other sizesA B
C D
G. Tilt-Up Viewing ModuleSwings open for easy access. Dual piston mechanisms hold the window securely in open. Priceincludes modication of plastic or stainless steel glovebox. Frame is stainless or powder-coatsteel; window is static-dissipative PVC. Must be ordered together with affected glovebox.
Single Chamber Twin Chamber
Glovebox Material Cat. # $/Each Cat. # $/Each
Plastic: SS frame 3305-20 1,943.00 3305-21 2,363.00
Plastic: powder-coat frame 3305-22 2,258.00 3305-23 2,678.00Stainless Steel 1684-92 1,875.00 1684-93 2,155.00
E F
G
25To Order, Call 714-578-6000or Fax 714-578-6020 Vol. 3 No. 15
7/30/2019 Inert systems
28/56
B. Heavyweight Nitrile GlovesThese heavy-duty nitrile rubber gloves provide unusual durabilitywhile maintaining optimum levels of form, t and function. Resistsa wide-range of chemicals, including solvents.
A. Accordion Sleeve and GloveThese accordion sleeves, made of neoprene, can be used forany size and type of gloves. The convenient two-piece designlets you change glove sizes and types for different operators orapplications without the expense of changing the sleeve itself.The corrugated section keeps the sleeve off the operators arm for
better air circulation and greater comfort. Includes nitrile gloves.Glove Thickness: 18 mil.
GloveSize
18" Sleeve, 12.75" gloveCat. # $/Pair
8 1689-46 310.00
9 1689-47 311.00
10 1689-48 312.00
Gloves & Sleeve
Combinations
D. Nitrile Sleeve and GloveTwo-piece units provide the convenience of quick glovereplacement. Sleeve has G.U.S. (glove-under-sleeve) connectorsto air-tight, liquid-tight seal. Unlined.
A B
C D
E F
One-PieceFully-Dipped Glove
HandSize
Lightweight (.015") Heavyweight (.030")Cat. # $/Pair Cat. # $/Pair
9 1671-15 316.00 1671-16 362.00
E. Neoprene Gloves for 10"-diameter ports
HandSize
One-Piece BondedNeoprene Dry BoxGlove
Neoprene Gloves 13"long, unlined texturedgrip
Neoprene SleeveSections 22" long
Cat. # $/Pair Cat. # $/Pair Cat. # $/Pair
8 1689-53 212.00 1670-83 18.00 1690-92 188.00
9 1689-55 212.00 1670-84 18.00 with G.U.S. connectors(see above)10 1689-56 212.00 1670-85 18.00
F. Hypalon Gloves for 10"-diameter ports
Hand Size
One-Piece Fully-Dipped HypalonDry Box Glove
Hypalon Gloves14" long, unlinedtextured grip
Hypalon SleeveSections22" long
Cat. # $/Pair Cat. # $/Pair Cat. # $/Pair
8 1671-05 79.00 1671-18 353.00
9 1671-17 318.00 1671-06 79.00
10 1671-07 79.00
All models for 10"-diameter ports
HandSize
Nitrile Gloves13" long
Nitrile Sleeve22" long
Cat. # $/Bag Cat. # $/Pair
8 1670-13 67.00 1670-17 133.00
9 1670-14 67.00 Sleeve has G.U.S.
10 1670-15 67.00 Connector (see above)
Glove
Size
13" Sleeve
Cat. # $/Pair8 1671-50 6.00
9 1671-51 6.00
10 1671-52 6.00
E. Neoprene Sleeve and Glove
Select one-piece bonded or two-piece sleeve/glove
combinations. Two-piece units provide the convenience ofquick, easy glove replacement while leaving the sleeves attachedto the glovebox. Sleeve and glove are joined by a Glove-Under-Sleeve (GUS) connector, which ensures an air-tight, liquid-tightseal and protection against hazardous materials. Length: 30"total (22" sleeve only, tapering to a 4"-diameter cut-off). Sleevethickness: 0.030" - 0.040".
F. Hypalon Sleeve and GloveSelect one-piece fully-dipped glove or two-piece sleeve/glovecombinations. Two-piece units provide the convenience ofquick, easy glove replacement while leaving the sleeves attachedto the glovebox. Sleeve and glove are joined by a Glove-Over-
Sleeve (GOS) connector, which ensures an air-tight, liquid-tightseal and easy glove changeout. Length: 32" total (22" sleeveonly, tapering to a 4"-diameter cut-off). Sleeve thickness: 0.015".
C. Butyl Sleeve and GloveTextured grip improves dexterity. Length: 32".
Shown: One-piecemodel availablefor 8"-dia. ports
26 Thousands of Critical Environment Solutions:www.TerraUniversal.com
7/30/2019 Inert systems
29/56
Glove &
Iris Ports
Specialty
Glove Ports
10"-diameter ports, standard on all Terragloveboxes, allow ample arm motion
Internal mounting system accepts portcaps or iris ports, which seal against theport frame to expand glovebox versatility(order caps and iris ports separately)
Versatile Three-Part Systemerras standard 10"-diameter glove ports, made of ABSastic, accommodate all the gloves on the facing page. Theirrsatile internal mounting hardware allows you to expandstem capabilities by adding either port covers or iris ports.
ort covers include an O-ring that seals tightly against theove ports from the inside of the chamber. This internal-ount system lets you seal a chamber when work is not inocess, and to replace gloves without affecting the internal
nvironment. Handles allow easy manipulation of the caps.
s ports also mount against the ports from the inside, converting
e chamber into an easy-access, non-sealed chamber thatperators can access using standard laboratory gloves.
eplacement Glove Portequired for either caps or iris ports. Included standard on allrra gloveboxes. Price is for one port.
New larger-diameter ports provide a wider range ofmotion to improve comfort and productivity!
Optional port cover seals against portto allow glove replacement without
compromising the internal environment
Optional iris port seals against port for easyaccess by operators with gloved hands
Round or oval, in 304/316 stainless steel, PVC,polypropylene, and more
Custom materials and configurations, including Delrinports and Viton or Buna-N O-rings: TerraUniversal.com
Port CoverMounts to a standard 10"-diameter
port. Price is for one cover.Cat. # $/Each1694-53 198.00
Iris PortIncludes iris port and port retaining
ring. Mounts to standard 10"-diameterport. Price is for one iris port.Cat. # $/Each
1694-54 294.00
Cat. # $/Each
1694-52 194.00
No. 1672-07 No. 1672-10 No. 1672-27 No. 1694-43
04 Stainless Steel Ports316L pharmaceutical-grade SS also available)Diameter Round Oval
Cat. # $/Each Cat. # $/Each
8" 1672-05 417.00
9" 1672-06 562.00 1672-10 781.00
10" 1672-07 700.00 1672-11 838.00
12" 1672-08 815.00 1672-12 896.00
PVC PortsDiameter Round
Cat. # $/Each
6" 1672-15 211.00
8" 1672-16 223.00
10" 1672-17 247.00
12" 1672-18 271.00
Polypropylene PortsDiameter Round Oval
Cat. # $/Each Cat. # $/Each
6" 1672-21 271.00
8" 1672-22 295.00 1672-27 223.00
10" 1672-23 301.00
12" 1672-24 319.00
Bag-Out Port Cat. # $/Each9" diameter. Other sizes available. 1694-43 260.00Bags: Package of 10 12-mil PVC bags for 9" port 1694-44 104.00
27To Order, Call 714-578-6000or Fax 714-578-6020 Vol. 3 No. 15
7/30/2019 Inert systems
30/56
Economizes on nitrogen consumption up to 78%
Extends shelf lives of stored materials bycontrolling moisture and moisture-related defects
DewWatch: Humidity Monitor & Control(Dual Purge System, RB valve required)
Typical application with NitroWatch/DualPurgehumidity controllers (not included)
egeneration Module
ainless Steel Enclosure
Fan
atalyticonverter
MolecularSieves
Controller
DryCyclerPerformance,
based on an 18cu. ft. glovebox
Controls
For StainlessSteel Enclosures
Cat. # $/Each
1606-60 180.00For PolymerEnclosures Cat.# $/EaCh
1600-60B 94.00
A. Dual Purge SystemPurges a glovebox with dry process gas to maintain acontinuous positive pressure that blocks out moistureand contaminants. Switches to high-ow purge tocompensate for pressure drop-outs or rising humidity
levels. Requires RB valve for safe operation.
110VAC, 60Hz or Cat. # $/Each220VAC, 50Hz 1603-57 2,715.00High-Flow System 1603-58 3,030.00
For rapid purge requiredin low-O2 chambers.
B. NitroWatchOperates in tandem with the Dual Purge System to
maintain user-determined humidity level (down to 0%RH).Cat. # $/Each
Control Unit 9500-00A 866.00Humidity Sensor 9500-02A 515.00
C. DewWatch Hygrometer
A high-performance alternative to the NitroWatch,
this unit monitors and displays dew/frost pointsbetween -80 and +20 degrees C. Sensor is sensitiveto 0.5 PPM(v) of moisture.
Cat. # $/Each
Control Unit 1401-07 3,240.00Sensor Probe 1401-12 1,589.00
D. Trace Gas Mixer
Assures accurate gas mixtures. Model shown featurestwo ow channels of specied ow.
Cat. # $/Each
2-20/2-20 2701-00 510.002-20/5-50 2702-00 527.005-50/5-50 2703-00 543.005-50/10-100 2704-00 511.00
E. DryCycler Regenerating
Gas DryerQuickly provides an ultra-low humidity level (down to 1ppm of water vapor) inside a glovebox or other enclosure.A humidity controller activates the dehydration moduleto maintain humidity set point.
Cat. # $/Each
6706-01 15,061.00
F. Automatic RB (Relief/Bleed)
Valve
Automatically relieves pressure build-ups to ensure safeoperating conditions with Terras gas control systems.
Process Gas & Humidity
HEPA Filters
E
Gas Out
via RB Valve
Continuous Low Flow
Intermittent High Flow
Internal Pressure
Monitor
Gas In DualPurge
Gas Out
via RB Valve
NitroWatch
DualPurge
Continuous Low Flow
Intermittent High Flow
Internal Humidity
Monitor
Purge Control
Purge Control
DualPurge
Gas InDewWatch
Continuous Low Flow
Intermittent High Flow
Internal Humidity
Monitor
Continuous Low FlowIntermittent High Flow
Gas One DualPurge
Gas Mixer
NitroWatch
Gas Two
A
B
C
D
F
F
Gas Outvia RB Valve
Gas Out
via RB Valve
28 Thousands of Critical Environment Solutions:www.TerraUniversal.com
7/30/2019 Inert systems
31/56
Controls
Process Gas & Humidity
. RH/Temperature
Data Logger
his USP device provides aonvenient record of humiditynd temperature conditions insidee process chamber. You set thegging interval (from 10 seconds to
2 hours), units (C or F) and hi/w alarms; the device stores up to6,382 temperature and RH readings.cluded software lets you download data via USP port and then display it as a strip
hart or export to an Excel spreadsheet. Only 4" long, the unit is powered by a single6V Li battery.
Cat. # $/Each
9500-10 195.00
. Programmable Logic Controllerserra congures and programs Allen-Bradley PLCs for a wide range of processpplications involving temperature, humidity, UV sterilization, and other control
ariables. Capabilities include touchscreen monitor/control of process recipes andmp cycles.
Call to discuss your process requirements!
Humex Humex 2
G. Humex Humidifierserras Humex Humidication Modules allow controlledoisture testing in a glovebox or other chamber. Theumex incorporates a water reservoir for high-volumepplications. The Humex 2 humidies the nitrogen
other process gas being fed into the chamber. Itplumbed to a standard water line and includes a
aporization chamber that provides 15 30 CFH ow rate.oth require a humidity sensor for automated humidityontrol with 3% accuracy. Visit TerraUniversal.com forll specications.
Cat. # $/Each
umex (110VAC, 50/60Hz) 9081-00 4,079.00umex 2 (110VAC, 50/60Hz) 9081-02 2,360.00umidity Sensor (installed) 9500-02A 515.00
H. Trace Oxygen Generatorhis Trace Oxygen Analyzer utilizes precise Zirconia Oxideffusion sensors to accurately detect oxygen concentrations,aking it ideal for applications in which even minute
oncentrations of oxygen can degrade parts. With a user-friendly,enu-driven microprocessor and a quick response time, thisxygen Analyzer is capable of measuring from 0.01ppm to00% oxygen with a high degree of accuracy. An RS232 interfaceincluded.
he control housing contains: the electronics module,e sensor, the sample cell, and a high-purity pump thataws gas from the glovebox for analysis. It includes agh-visibility LED digital display that indicates oxygen
oncentration.ensor: Quick response zirconia oxide diffusion
sensorMeasurement Range: Autoranging from 0.01 ppm to 100%
ccuracy: 1% or better of measured value in ppm
epeatability: 0.2% of measured valueesponse Time: 90% of step change within 5 secondsower: User selectable 110/220VAC, 50/60Hzcludes connection to specified glovebox.
Typical application with NitroWatch/DualPurge humidity controllers (not included)
Cat. # $/EachTrace Oxygen Analyzer 2005-97 6,917.00
OxygenAnalyzer
Continuous Low Flow
Intermittent High Flow
O2 Monitor
Sample for SensorCalibration
DualPurge
NitroWatch
G
H
I
J
Gas out viaRB valve
CO2Analyzeralso available
29To Order, Call 714-578-6000or Fax 714-578-6020 Vol. 3 No. 15
7/30/2019 Inert systems
32/56
Process Gas
Generators& Dryers
Terras gas generators and gas dryers provideseveral ways to produce a dry, particle-freeenvironment inside glove boxes, desiccators, andother enclosures.
Membrane separation systems operate with nomoving parts and require almost no maintenance.The Nitrogen Generator uses this technology toprovide a reliable source of clean, dry nitrogen.
nd Plate
Epoxy Tube Sheet
O-RingsFeed Air
Support Core
Hollow Fibers
Enriched NitrogenProduct Gas
Outer Case
Oxygen-Enriched Air
Nitrogen GeneratorSeparation Membrane Reliable, Hassle-FreeNitrogen Source!
Dryex 80
Nitrogen Generators
Purity vs. Flow Rates (@100 PSI inlet feed, 72F*)
Model Purity99% 98% 97%
No. 2700-12A 7.4 CFH 10.2 CFH 12.5 CFHNo. 2700-11A 49.0 CFH 65.0 CFH 75.0 CFHNo. 2700-09A 126.0 CFH 180.0 CFH 223.0 CFH
* Higher ow rates can be achieved with higher feedtemperatur