C E N ===== INFORMATION PROCEDURE ++++++++++++++++++++++++++++++++++++ + MONTHLY NOTIFICATIONS REGISTER + ++++++++++++++++++++++++++++++++++++ Notifications registered at the CEN CENTRAL SECRETARIAT in 2017-01 Notifications sorted according to country

************************************************** page 1 * INFORMATION PROCEDURE. NOTIFICATIONS REGISTER * ************************************************** COUNTRY Austria -------------------------------------------------------------------------- SUBSECTOR : B99 - Building and construction undetermined ORGANIZATION : ASI REGISTRATION DATE: 2017-01-20 COUNTRY : Austria PROJECT ID. : 00027055/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 269823752 TITLE : Flexible sheets for waterproofing - Underlays for discontinuous roofing - National implementation of ÖNORM EN 13859-1 TITLE AMPLIF.: This standard is used for the implementation of ÖNORM EN 13859-1. The present document determines in clause 5 the minimum technical requirements for flexible sheets for waterproofing as underlays for discontinuous roofing in terms of basic usability in Austria. The specific requirements for bitumen and plastic sheets that come in Austria for the application are in clause 6 and clause 7. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : B99 - Building and construction undetermined ORGANIZATION : ASI REGISTRATION DATE: 2017-01-20 COUNTRY : Austria PROJECT ID. : 00027057/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 269823738 TITLE : Construction and testing of burial sites and monuments TITLE AMPLIF.: This Austrian Standard includes technical requirements for construction and testing of burial sites and new constructed monuments. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------

************************************************** page 2 * INFORMATION PROCEDURE. NOTIFICATIONS REGISTER * ************************************************** SUBSECTOR : F06 - Terminology principles ORGANIZATION : ASI REGISTRATION DATE: 2017-01-20 COUNTRY : Austria PROJECT ID. : 00027054/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 269823746 TITLE : Translation Services -- Project Management TITLE AMPLIF.: The present ÖNORM deals with the various steps to be observed while managing translation services and describes the professional requirements and competences with regard to project managers in charge of those services. The standard will give translation project managers a practical orientation and will contribute to a harmonised approach to translation management tasks. Furthermore, by describing the processes in connection with translation projects, it intends to provide customers with information about how to support a rational und smooth flow of the translation process through proper preparation of the content to be translated prior to awarding the translation contract RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : T16 - Lifts & escalators ORGANIZATION : ASI REGISTRATION DATE: 2017-01-20 COUNTRY : Austria PROJECT ID. : 00027056/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 269823730 TITLE : Lifts, escalators and passenger conveyors - Part 2: Risk assessment for lifts TITLE AMPLIF.: This ÖNORM describes each one possible procedure for the risk assessment for additional risks for lifts with openings in their shafts, for the construction operation and for landings with limited access (e.g. landings to penthouse), and can be used for the development of risk assessments for the complete lift, necessary according to ASV 2015, Attachment I (Anlage I) in conjunction with ÖNORM EN ISO 14798. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------

************************************************** page 3 * INFORMATION PROCEDURE. NOTIFICATIONS REGISTER * ************************************************** COUNTRY Czech Republic -------------------------------------------------------------------------- SUBSECTOR : B02 - Structures ORGANIZATION : UNMZ REGISTRATION DATE: 2017-01-05 COUNTRY : Czech Republic PROJECT ID. : 73008516/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: UNMZ 73008516 TITLE : Fibre-reinforced concrete - Testing of fresh fibre-reinforced concrete TITLE AMPLIF.: The aim of the modification is unification of the standard according to the other standards. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : B02 - Structures ORGANIZATION : UNMZ REGISTRATION DATE: 2017-01-23 COUNTRY : Czech Republic PROJECT ID. : 75002616/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: UNMZ 75002616 TITLE : Amelioration - Irrigation requirement TITLE AMPLIF.: This standard applies to the determination of the needs of irrigation water in the design and assessment of structures and facilities of any management supplemental irrigation and irrigation management operation. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : B17 - Lighting equipment and lighting application technology ORGANIZATION : UNMZ REGISTRATION DATE: 2017-01-18 COUNTRY : Czech Republic PROJECT ID. : 73001716/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: UNMZ 73001716 TITLE : Daylighting in buildings - Part 1: Basic Requierements TITLE AMPLIF.: The aim of the modification is unification of the standard according to the other standards. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------

************************************************** page 4 * INFORMATION PROCEDURE. NOTIFICATIONS REGISTER * ************************************************** COUNTRY Germany -------------------------------------------------------------------------- SUBSECTOR : B01 - Fire Protection ORGANIZATION : DIN REGISTRATION DATE: 2017-01-16 COUNTRY : Germany PROJECT ID. : 03101113/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 03101113 TITLE : Firefighting and fire protection - Terms; Amendment A2 TITLE AMPLIF.: The document contains terms and definitions for fire fighting purposes. The terms and definitions of this standard are intended for practical use in firefighting and fire protection. They are established in the simplest possible way and partly waiving scientific rigor. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : B02 - Structures ORGANIZATION : DIN REGISTRATION DATE: 2017-01-16 COUNTRY : Germany PROJECT ID. : 00517914/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 00517914 TITLE : Masonry - Part 4: Prefabricated masonry compound units TITLE AMPLIF.: The draft applies to prefabricated masonry components that are mainly storey-high and of room-width (including parapets and gables) and the buildings constructed using such components. It includes structural details, information on the stability analysis required for each prefabricated component and for the structure, taking into account transport and erection. RELATEDNESS ----------- NATIONAL : DIN 1053-4 (2013-04) REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------

************************************************** page 5 * INFORMATION PROCEDURE. NOTIFICATIONS REGISTER * ************************************************** SUBSECTOR : B12 - Masonry ORGANIZATION : DIN REGISTRATION DATE: 2017-01-16 COUNTRY : Germany PROJECT ID. : 00517916/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 00517916 TITLE : Site made masonry mortars TITLE AMPLIF.: This draft specifies the requirements for masonry mortar, which is produced on site as designed or prescribed masonry mortar for the on-site use and construction of masonry according to DIN EN 1996 (site made masonry mortar). RELATEDNESS ----------- NATIONAL : DIN V 18580 (2007-03) REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : B18 - Scaffolding ORGANIZATION : DIN REGISTRATION DATE: 2017-01-16 COUNTRY : Germany PROJECT ID. : 00517920/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 00517920 TITLE : Mechanical security equipment - Part 1: Burglar resistant products for port installation for windows and doors - Requirements and test methods TITLE AMPLIF.: This standard specifies minimum requirements for burglar resistant products, which - can be fixed additionally to door and window elements and - can lock these elements thus increasing the resistance of such elements against burglary, so that overcoming them with simple tools is more difficult. RELATEDNESS ----------- NATIONAL : DIN 18104-1 (2013-05) REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : B20 - Drainage equipment ORGANIZATION : DIN REGISTRATION DATE: 2017-01-16 COUNTRY : Germany PROJECT ID. : 11904175/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 11904175 TITLE : Dirt trap for manhole covers TITLE AMPLIF.: The standard deals with dirt trap for manhole cover, for example for manhole covers of specified classes. RELATEDNESS ----------- NATIONAL : DIN 1221 (1992-02) REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------

************************************************** page 6 * INFORMATION PROCEDURE. NOTIFICATIONS REGISTER * ************************************************** SUBSECTOR : B20 - Drainage equipment ORGANIZATION : DIN REGISTRATION DATE: 2017-01-16 COUNTRY : Germany PROJECT ID. : 11904176/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 11904176 TITLE : Sewage Fittings - Technical specifications for delivery for fittings from cast iron, concrete and concrete in connection with cast iron TITLE AMPLIF.: These technical specifications for delivery apply for standardised and non standardised fittings form materials in accordance with DIN EN 124-1 to DIN EN 124-6. RELATEDNESS ----------- NATIONAL : DIN 19585 (1976-11) REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : B20 - Drainage equipment ORGANIZATION : DIN REGISTRATION DATE: 2017-01-16 COUNTRY : Germany PROJECT ID. : 11904177/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 11904177 TITLE : Concrete elements and buckets for gullies - Class A and class B - Concrete elements TITLE AMPLIF.: This Standard applies for concrete elements for gullies in traffic Areas of classes A and B in accordance with DIN 1213-1. Requirements for installation are specified in DIN 1236-1. RELATEDNESS ----------- NATIONAL : DIN 1236-2 (1981-11) REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : B20 - Drainage equipment ORGANIZATION : DIN REGISTRATION DATE: 2017-01-16 COUNTRY : Germany PROJECT ID. : 11904178/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 11904178 TITLE : Concrete elements and buckets for gullies - Classes A and B - Buckets TITLE AMPLIF.: This Standard applies for buckets for gullies in traffic Areas of classes A and B in accordance with DIN 1213-1. Requirements for installation are specified in DIN1236-1. RELATEDNESS ----------- NATIONAL : DIN 1236-3 (1981-11) REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------

************************************************** page 7 * INFORMATION PROCEDURE. NOTIFICATIONS REGISTER * ************************************************** SUBSECTOR : B20 - Drainage equipment ORGANIZATION : DIN REGISTRATION DATE: 2017-01-16 COUNTRY : Germany PROJECT ID. : 11904179/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 11904179 TITLE : Concrete elements and buckets for road gullies - Part 3: Concrete elements TITLE AMPLIF.: The standard specifies general requirements for the different parts of road gullies and gives information for concrete elements. RELATEDNESS ----------- NATIONAL : DIN 4052-3 (2006-05) REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : C99 - Chemicals, chemical engineering and food products undetermined ORGANIZATION : DIN REGISTRATION DATE: 2017-01-16 COUNTRY : Germany PROJECT ID. : 05701947/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 05701947 TITLE : Food hygiene - Production and dispense of cream from cream whipping machines - Hygiene requirements, testing TITLE AMPLIF.: The document specifies hygiene requirements for production and dispense of cream from cream whipping machinery. The document sets requirements for handling, cleaning, disinfection and maintenance of cream whipping machinery as well as requirements for the assessment of the disinfection process. RELATEDNESS ----------- NATIONAL : DIN 10507 (2006-11) REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : F07 - Documentation and information ORGANIZATION : DIN REGISTRATION DATE: 2017-01-16 COUNTRY : Germany PROJECT ID. : 00900113/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 00900113 TITLE : Effectiveness of paper deacidification processes TITLE AMPLIF.: Archives, libraries and similar institutions store written and printed documents which they are obliged to retain on a permanent basis for cultural reasons and, in some cases, in order to meet legal requirements. Often, the condition of these documents is endangered for a number of reasons. The problem of paper degradation due to acid has developed into a tremendous problem for archives and libraries. This document specifies test methods and minimum requirements for paper deacidification processes regarding their effectiveness and consistency. It is applicable for all large scale processes which offer deacidification of acid documents made of printed or hand-written paper.

RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------

************************************************** page 8 * INFORMATION PROCEDURE. NOTIFICATIONS REGISTER * ************************************************** SUBSECTOR : F15 - Material testing in general ORGANIZATION : DIN REGISTRATION DATE: 2017-01-16 COUNTRY : Germany PROJECT ID. : 06234914/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 06234914 TITLE : Rockwell penetration test to evaluate the adhesion of carbon layers TITLE AMPLIF.: This standard specifies a method for the qualitative assessment of the adhesion of carbon layers with a thickness of up to 10 Mikrometer, in which an impression is produced with a diamond indenter used for the Rockwell hardness test. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : H04 - Sports equipment ORGANIZATION : DIN REGISTRATION DATE: 2017-01-16 COUNTRY : Germany PROJECT ID. : 11201193/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 11201193 TITLE : Gymnastic and playing field equipment - Electrically operated lifting devices - Safety requirements and testing TITLE AMPLIF.: This standard applies to electromechanical lifting devices for halls built in halls and playing field devices. This standard specifies special safety requirements for electromotive lifting devices for gymnastics and gaming machines. These special safety requirements apply in addition to the safety requirements for lifting devices defined by CEN / TC 147 "Cranes". This standard does not apply to hand-operated lifting devices, such as hand cranked or counterbalanced lifting devices. NOTE For safety reasons, eg due to 4.3 of DIN 18032-1: 1989 and operating problems by students, hand-operated lifting devices are not recommended. It should be pointed out that also hand-operated devices of the Ninth Ordinance on the Equipment Safety Act (Machinery Ordinance), with which the Machinery Directive 2006/42 / EC has been transposed into national law. This standard does not cover any part of the scaffolding of the lifting or safety device, its suspension or its fastening points, any device for setting the device and / or the gymnastics device itself. RELATEDNESS ----------- NATIONAL : DIN 7892 (2003-06) REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------

************************************************** page 9 * INFORMATION PROCEDURE. NOTIFICATIONS REGISTER * ************************************************** SUBSECTOR : I09 - Small tools ORGANIZATION : DIN REGISTRATION DATE: 2017-01-16 COUNTRY : Germany PROJECT ID. : 12102711/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 12102711 TITLE : Concept for the design of 3D models based on properties according to DIN 4000 - Part 180: Tool assemblies TITLE AMPLIF.: This standard is valid in combination with DIN 4003-1 and DIN 4000-180 to represent 3D models of tool assemblies. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : M99 - Metallic materials undetermined ORGANIZATION : DIN REGISTRATION DATE: 2017-01-16 COUNTRY : Germany PROJECT ID. : 08201374/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 08201374 TITLE : Inseparable elastomer sealed connectors made of metal for metallic pipes for use in drinking water system installation - General requirements and test methods TITLE AMPLIF.: This technical standard is valid for permanent connectors (e. g. press fittings) and for the corresponding sealing elements made of elastomers which are used in drinking water system installation. The document specifies the requirements and tests regarding materials (metal, elastomers) as well as the requirements of the functions of the connection (e. g. leak-tightness) and the hygiene. RELATEDNESS ----------- NATIONAL : DIN 2459 (2011-06) REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------

************************************************** page 10 * INFORMATION PROCEDURE. NOTIFICATIONS REGISTER * ************************************************** SUBSECTOR : S15 - Surgical instruments ORGANIZATION : DIN REGISTRATION DATE: 2017-01-16 COUNTRY : Germany PROJECT ID. : 02702883/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 02702883 TITLE : Medical instruments - Needle holder type Masson TITLE AMPLIF.: This standard defines dimensions and marking of needle holder type Masson, as used in surgery and public health service. RELATEDNESS ----------- NATIONAL : DIN 58259 (2010-02) REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : S15 - Surgical instruments ORGANIZATION : DIN REGISTRATION DATE: 2017-01-16 COUNTRY : Germany PROJECT ID. : 02702884/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 02702884 TITLE : Medical instruments - Ligature needle type Deschamps TITLE AMPLIF.: This standard defines requirements for ligature needles type Deschamps, as used in surgery and public health service. RELATEDNESS ----------- NATIONAL : DIN 58260 (2010-09) REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : S15 - Surgical instruments ORGANIZATION : DIN REGISTRATION DATE: 2017-01-16 COUNTRY : Germany PROJECT ID. : 02702887/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 02702887 TITLE : Medical instruments - Needle holder type Crile-Wood - Part 1: Without carbide inserts TITLE AMPLIF.: This standard defines requirements for needle holder type Crile-Wood, as used in surgery and public health service. RELATEDNESS ----------- NATIONAL : DIN 58266-1 (2010-02) REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------

************************************************** page 11 * INFORMATION PROCEDURE. NOTIFICATIONS REGISTER * ************************************************** SUBSECTOR : S15 - Surgical instruments ORGANIZATION : DIN REGISTRATION DATE: 2017-01-16 COUNTRY : Germany PROJECT ID. : 02702888/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 02702888 TITLE : Medical instruments - Needle holder type Crile-Wood - Part 2: With carbide inserts TITLE AMPLIF.: This standard defines requirements for needle holder Crile-Wood with carbide inserts, as used in surgery and public health service. RELATEDNESS ----------- NATIONAL : DIN 58266-2 (2010-02) REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : S15 - Surgical instruments ORGANIZATION : DIN REGISTRATION DATE: 2017-01-16 COUNTRY : Germany PROJECT ID. : 02702890/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 02702890 TITLE : Medical instruments - Forceps type Adson TITLE AMPLIF.: This standard defines requirements for forceps type Adson, as used in surgery and public health service. RELATEDNESS ----------- NATIONAL : DIN 58276 (2010-02) REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : S15 - Surgical instruments ORGANIZATION : DIN REGISTRATION DATE: 2017-01-16 COUNTRY : Germany PROJECT ID. : 02702891/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 02702891 TITLE : Medical instruments - Retractor type Kocher TITLE AMPLIF.: This standard defines requirements for retractor type Kocher, as used in surgery and public health service. RELATEDNESS ----------- NATIONAL : DIN 58286 (2010-02) REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------

************************************************** page 12 * INFORMATION PROCEDURE. NOTIFICATIONS REGISTER * ************************************************** SUBSECTOR : S15 - Surgical instruments ORGANIZATION : DIN REGISTRATION DATE: 2017-01-16 COUNTRY : Germany PROJECT ID. : 02702892/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 02702892 TITLE : Medical instruments - Retractor type Körte TITLE AMPLIF.: This standard defines requirements for retractors type Körte, as used in surgery and public health service. RELATEDNESS ----------- NATIONAL : DIN 58287 (2010-02) REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : S15 - Surgical instruments ORGANIZATION : DIN REGISTRATION DATE: 2017-01-16 COUNTRY : Germany PROJECT ID. : 02702893/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 02702893 TITLE : Medical instruments - Retractor type Langenbeck TITLE AMPLIF.: This standard defines requirements for retractors type Langenbeck, as used in surgery and public health service. RELATEDNESS ----------- NATIONAL : DIN 58288 (2010-02) REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : S15 - Surgical instruments ORGANIZATION : DIN REGISTRATION DATE: 2017-01-16 COUNTRY : Germany PROJECT ID. : 02702894/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 02702894 TITLE : Medical instruments - Abdominal and liver retractor type Mikulicz, blade curred TITLE AMPLIF.: This standard defines requirements for abdominal and liver retractors type Mikulicz, blade curred, as used in surgery and public health service. RELATEDNESS ----------- NATIONAL : DIN 58289 (2010-02) REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------

************************************************** page 13 * INFORMATION PROCEDURE. NOTIFICATIONS REGISTER * ************************************************** SUBSECTOR : S15 - Surgical instruments ORGANIZATION : DIN REGISTRATION DATE: 2017-01-16 COUNTRY : Germany PROJECT ID. : 02702897/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 02702897 TITLE : Medical instruments - Lid retractor type Desmarres TITLE AMPLIF.: This standard defines requirements for lid retractors type Desmarres, as used in surgery and public health service. RELATEDNESS ----------- NATIONAL : DIN 58294 (2010-02) REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : S15 - Surgical instruments ORGANIZATION : DIN REGISTRATION DATE: 2017-01-16 COUNTRY : Germany PROJECT ID. : 02702898/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 02702898 TITLE : Medical instruments - Retractor type Volkmann TITLE AMPLIF.: This standard defines requirements for retractors type Volkmann, as used in surgery and public health service. RELATEDNESS ----------- NATIONAL : DIN 58295 (2010-02) REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : S15 - Surgical instruments ORGANIZATION : DIN REGISTRATION DATE: 2017-01-16 COUNTRY : Germany PROJECT ID. : 02702901/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 02702901 TITLE : Medical instruments - Retractors type Cushing TITLE AMPLIF.: This standard defines requirements for retractors type Cushing, as used in surgery and public health service. RELATEDNESS ----------- NATIONAL : DIN 58315 (2010-02) REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------

************************************************** page 14 * INFORMATION PROCEDURE. NOTIFICATIONS REGISTER * ************************************************** SUBSECTOR : S15 - Surgical instruments ORGANIZATION : DIN REGISTRATION DATE: 2017-01-16 COUNTRY : Germany PROJECT ID. : 02702905/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 02702905 TITLE : Medical instruments - Ear specula type Hartmann TITLE AMPLIF.: This standard defines requirements for ear specula type Hartmann, as used in surgery and public health service. RELATEDNESS ----------- NATIONAL : DIN 58785 (2010-02) REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : S15 - Surgical instruments ORGANIZATION : DIN REGISTRATION DATE: 2017-01-16 COUNTRY : Germany PROJECT ID. : 02702910/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 02702910 TITLE : Medical instruments - Bone levers type Hohmann TITLE AMPLIF.: This standard defines requirements for bone levers type Hohmann, as used in surgery and public health service. RELATEDNESS ----------- NATIONAL : DIN 58845 (2010-02) REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : S15 - Surgical instruments ORGANIZATION : DIN REGISTRATION DATE: 2017-01-16 COUNTRY : Germany PROJECT ID. : 02702918/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 02702918 TITLE : Medical instruments - Osteotomes type Lexer TITLE AMPLIF.: This standard defines requirements for osteotomes type Lexer, as used in surgery and public health service. RELATEDNESS ----------- NATIONAL : DIN 58860 (2010-02) REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------

************************************************** page 15 * INFORMATION PROCEDURE. NOTIFICATIONS REGISTER * ************************************************** SUBSECTOR : S15 - Surgical instruments ORGANIZATION : DIN REGISTRATION DATE: 2017-01-16 COUNTRY : Germany PROJECT ID. : 02702919/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 02702919 TITLE : Medical instruments - Osteotomes type Lambotte TITLE AMPLIF.: This standard defines requirements for osteotomes type Lambotte, as used in surgery and public health service. RELATEDNESS ----------- NATIONAL : DIN 58861 (2010-02) REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : S15 - Surgical instruments ORGANIZATION : DIN REGISTRATION DATE: 2017-01-16 COUNTRY : Germany PROJECT ID. : 02702926/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 02702926 TITLE : Medical instruments - Self-retaining retractor type Beckmann-Adson TITLE AMPLIF.: This standard defines requirements for osteotomes type Lambotte, as used in surgery and public health service. RELATEDNESS ----------- NATIONAL : DIN 96082 (2010-12) REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : S19 - First aid equipment and rescue systems ORGANIZATION : DIN REGISTRATION DATE: 2017-01-16 COUNTRY : Germany PROJECT ID. : 06301831/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 06301831 TITLE : Surgical dressings - Surgical sheets TITLE AMPLIF.: This document specifies sterile surgical sheets, especially used in first-aid. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------

************************************************** page 16 * INFORMATION PROCEDURE. NOTIFICATIONS REGISTER * ************************************************** SUBSECTOR : S19 - First aid equipment and rescue systems ORGANIZATION : DIN REGISTRATION DATE: 2017-01-16 COUNTRY : Germany PROJECT ID. : 06301832/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 06301832 TITLE : First aid material - First-aid box for fire-brigade motor cars TITLE AMPLIF.: This document applies for first-aid-boxes in fire fighting vehicles and provides a basic equipment for the first aid. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : S99 - Health, environment and medical equipment undetermined ORGANIZATION : DIN REGISTRATION DATE: 2017-01-16 COUNTRY : Germany PROJECT ID. : 08000294/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 08000294 TITLE : Nuclear medicine departments - Part 1: Rules for the construction and equipping of facilities for ambulatory use of unsealed radioactive materials for diagnosis and treatment TITLE AMPLIF.: The document contains rules for planning, construction and equipping of nuclear medical departments for ambulant use of unsealed radioactive material for diagnosis and therapy. RELATEDNESS ----------- NATIONAL : DIN 6844-1 (2005-01) REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : S99 - Health, environment and medical equipment undetermined ORGANIZATION : DIN REGISTRATION DATE: 2017-01-16 COUNTRY : Germany PROJECT ID. : 08000295/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 08000295 TITLE : Nuclear medicine departments - Part 2: Rules for the construction and equipment of departments for the therapeutic use of unsealed radioactive substances TITLE AMPLIF.: The document contains rules for planning, construction and equipping of nuclear medical departments for therapeutic application of unsealed radioactive material. RELATEDNESS ----------- NATIONAL : DIN 6844-2 (2005-01) REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------

************************************************** page 17 * INFORMATION PROCEDURE. NOTIFICATIONS REGISTER * ************************************************** SUBSECTOR : T01 - Shipbuilding and maritime structures ORGANIZATION : DIN REGISTRATION DATE: 2017-01-16 COUNTRY : Germany PROJECT ID. : 13202873/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 13202873 TITLE : Closing devices (fasteners) and fork plates for ship's equipment TITLE AMPLIF.: Closing devices specifies are parts of small hatchways (e. g. access hatchways, hatchways for emergency escape) and flaps (e. g. ventilator flaps). They essentially consist of eye bolts and bow- or toggle nuts. They serve to procreation the contact pressure between cover and coaming or frame, which is necessary for thightness of hatchways of flaps. RELATEDNESS ----------- NATIONAL : DIN 83407 (1996-06) REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : T01 - Shipbuilding and maritime structures ORGANIZATION : DIN REGISTRATION DATE: 2017-01-16 COUNTRY : Germany PROJECT ID. : 13202883/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 13202883 TITLE : Elastomer mounts - Technical specification TITLE AMPLIF.: This standard specifies test requirements for elastomer mounts. This standard is applicable to elastomer mounts with properties according to dimensional standards which are referencing this DIN 95360. RELATEDNESS ----------- NATIONAL : DIN 95360 (2009-06) REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : T02 - Aerospace ORGANIZATION : DIN REGISTRATION DATE: 2017-01-16 COUNTRY : Germany PROJECT ID. : 13115763/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 13115763 TITLE : Aerospace Series - Methods for inspection of metallic components, produced with additive powderbed fusion processes TITLE AMPLIF.: This Standard gives Information about the testing of additive manufactured products with the powderbed process. Destructive and non-destructive testing procedures are evaluated for their suitability. For addtivie manufactured products made of metallic wires or rods see the relevant welding Standards (e. g. DIN 2959). This Standard applies to the aerospace industry, but may also be used for other areas RELATEDNESS ----------- NATIONAL : NEW

REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------

************************************************** page 18 * INFORMATION PROCEDURE. NOTIFICATIONS REGISTER * ************************************************** SUBSECTOR : T02 - Aerospace ORGANIZATION : DIN REGISTRATION DATE: 2017-01-16 COUNTRY : Germany PROJECT ID. : 13115776/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 13115776 TITLE : Aerospace series - Technical Specifications for additive manufacturing of metallic materials with the powder bed process TITLE AMPLIF.: This Standard defines requirments for additive manufacturing of metallic materials with the powder bed process. This Standard applies to the aerospace industry, but may also be used for other areas. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : T02 - Aerospace ORGANIZATION : DIN REGISTRATION DATE: 2017-01-16 COUNTRY : Germany PROJECT ID. : 13115809/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 13115809 TITLE : Aerospace - Test methods for surface protection; Paints and varnishes - Part 6: Chemical and electroplated coatings TITLE AMPLIF.: The document provides a summary of test methods applicable to surface protections, in particular to chemical and electroplated coatings according to LN 9368. RELATEDNESS ----------- NATIONAL : DIN 65046-6 (2010-10) REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : W04 - Overhead electric lines ORGANIZATION : DIN REGISTRATION DATE: 2017-01-16 COUNTRY : Germany PROJECT ID. : 02227300/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 02227300 TITLE : Overhead electrical lines exceeding 45 kV - Hybrid AC/DC transmission and DC transmission TITLE AMPLIF.: This prestandard applies for the planning and installation of high-voltage overhead electrical lines with hybrid AC/DC systems, i.e. one or more AC circuits are in parallel with one or more DC circuits in close vicinity. It also applies for the planning and installation of DC high-voltage overhead electrical lines. In this prestandard AC systems with a nominal voltage exceeding 45 kV and DC systems with a rated voltage exceeding 45 kV are regarded as high-voltage overhead electrical lines. The configuration of the DC system (e. g. monopoles, bipoles) must be taken into account especially for the rating of the neutral

conductor. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------

************************************************** page 19 * INFORMATION PROCEDURE. NOTIFICATIONS REGISTER * ************************************************** SUBSECTOR : W11 - Electrical accessories ORGANIZATION : DIN REGISTRATION DATE: 2017-01-16 COUNTRY : Germany PROJECT ID. : 02227281/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 02227281 TITLE : Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 21: Selective main circuit-breakers TITLE AMPLIF.: DIN VDE 0641 21 (VDE 0641 21) applies to selective main circuit-breakers (SMCBs) for operation at 50/60 Hz, having a rated voltage not exceeding 440 V (between phases), a rated current not exceeding 125 A and a rated short-circuit capacity not exceeding 50000 A. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : W27 - Electrical installations in buildings ORGANIZATION : DIN REGISTRATION DATE: 2017-01-16 COUNTRY : Germany PROJECT ID. : 02227255/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 02227255 TITLE : Operation of electrical installations - Part 111: Particular requirements for underground mines TITLE AMPLIF.: The document deals with requirements for safer operation of electrical installations in underground mines. These operating requirements intended to ensure that servicing and working on or near live parts of those installations can be carried out without any risk. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------

************************************************** page 20 * INFORMATION PROCEDURE. NOTIFICATIONS REGISTER * ************************************************** COUNTRY Italy -------------------------------------------------------------------------- SUBSECTOR : B17 - Lighting equipment and lighting application technology ORGANIZATION : UNI REGISTRATION DATE: 2017-01-31 COUNTRY : Italy PROJECT ID. : 01602483/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 269823801 TITLE : Light and lighting - Computerized calculation tool for determining the LENI according to the EN 15193 comprehensive method TITLE AMPLIF.: The technical report will be help the calculation the LENI using the comprehensive method calculation provided by the EN 15193-1 and a specially written software program. The goal of this tool is to help the use of the LENI software. The software has a graphical interface that allows, step-by-step,the guided input of the data required.LENI is calculated for one room, one floor and/on one building. The scope will be for non-residential buildings as prescribed by the EN 15193-1. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : B25 - Gas distribution installation and related equipment ORGANIZATION : UNI REGISTRATION DATE: 2017-01-31 COUNTRY : Italy PROJECT ID. : 01602593/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 269823782 TITLE : Gas measuring systems - Hourly gas measuring devicesMetering telemanagement - Safe Use of integrated controlled remotely valve TITLE AMPLIF.: This technical report identifies the temporary instruction for the use of the integrated electrovalve in the smart meter G4 and G6; this technical report also defines tests to be carried out on smart meter in order to collect homogeneous and comparable data to verify the reliability of electrovalve over time. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------

************************************************** page 21 * INFORMATION PROCEDURE. NOTIFICATIONS REGISTER * ************************************************** SUBSECTOR : C01 - Food products ORGANIZATION : UNI REGISTRATION DATE: 2017-01-31 COUNTRY : Italy PROJECT ID. : 01602531/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 269823795 TITLE : Metallic closures in contact with foodsuffs - Determination of Polyadipates (PAD) having molecular weight lower than 1000 Da in vegetal oil (D2) food simulant TITLE AMPLIF.: This standard is related to a methodology that make use of liquid chromatography mass spectrometry (LC-MS) in order to determinate the specific migration of polyadipates (PAD) with molecular weight lower than 1000 Da in vegetal oil D2 food simulant from metallic closures. The LC-MS method is suitable for the quantitative determination of PAD from the LoQ to 300 mg/kg food simulant, according to the explained test conditions. For the determination, PAD analytical standards from the producers or from the users are required. In order to cover the potential difficulties in finding the standards and the information concerning their molecular weights (essential data for the determination of the results), three other approaches are proposed as alternatives. The first one is based on the co-definition between the involved parts of a percentage relate to molecular weights distribution <1000 Da; the second one suggest the determination of this value according to UNI CEN/TS 14577; the third is based onto gaschromatography mass spectrometry (GC-MS; however, for this method, no validation and precision data are available). RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : C01 - Food products ORGANIZATION : UNI REGISTRATION DATE: 2017-01-31 COUNTRY : Italy PROJECT ID. : 01602580/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 269823777 TITLE : Appliances for the production and dispense of hot beverages for use in commercial and communities -Test methods and migration limits of lead and nickel TITLE AMPLIF.: This standard specifies migration limits of lead and nichel in appliances for the production and dispense of hot beverages for public catering. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------

************************************************** page 22 * INFORMATION PROCEDURE. NOTIFICATIONS REGISTER * ************************************************** SUBSECTOR : H09 - Furniture ORGANIZATION : UNI REGISTRATION DATE: 2017-01-31 COUNTRY : Italy PROJECT ID. : 01602558/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 269823771 TITLE : Furniture - Technical specification for the purchase of school furniture TITLE AMPLIF.: This Technical Report is a guide to draft technical specifications for the purchase of school furniture. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : M05 N14 - Welding Plastics pipes ORGANIZATION : UNI REGISTRATION DATE: 2017-01-31 COUNTRY : Italy PROJECT ID. : 01602635/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 269823790 TITLE : Qualification of welders for pipes according to EN 13067 and e UNI 9737 - Guidelines for the preparation of the theoretical exam questionnaire TITLE AMPLIF.: The technical report prepares the relevant questionnaire in the evaluation process of theoretical knowledge of those who wish to take a qualifying exam for the certificate of conformity to the UNI EN 13067. The questions and the answers proposed in this Technical Report satisfy both form (questionnaire with multiple answers) in both the arguments as specified in paragraph 5.3 of EN 13067. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : Z99 - Undetermined ORGANIZATION : UNI REGISTRATION DATE: 2017-01-31 COUNTRY : Italy PROJECT ID. : 01602663/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 269823821 TITLE : Unregulated professional activities - ICT professional profiles - Part 1: Methodology for the construction of professional profiles based on the e-CF system TITLE AMPLIF.: The present proposal aims to standardize the construction of professional profiles based on the e-CF system and the related generation 2 and 3 profiles, in order to ease up and harmonize their use in various operational contexts which may differ with regards to technology and application aspects.The standard proposal takes as a main reference what already defined in the CWA 16458, completing and contextualizing it to the national market. RELATEDNESS

----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------

************************************************** page 23 * INFORMATION PROCEDURE. NOTIFICATIONS REGISTER * ************************************************** SUBSECTOR : Z99 - Undetermined ORGANIZATION : UNI REGISTRATION DATE: 2017-01-31 COUNTRY : Italy PROJECT ID. : 01602664/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 269823806 TITLE : Unregulated professional activities - ICT professional profiles - Part 2: “Second generationö professional profiles TITLE AMPLIF.: The present proposal aims to define the main second generation ICT professional profiles, taking what is defined in the CWA 16458 as a reference model to be expanded and contextualized to the national environment. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : Z99 - Undetermined ORGANIZATION : UNI REGISTRATION DATE: 2017-01-31 COUNTRY : Italy PROJECT ID. : 01602665/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 269823811 TITLE : Unregulated professional activities - ICT professional profiles - Part 3: Web profession professional profiles TITLE AMPLIF.: The present standardization proposal aims to use the tools provided by the related part 1 "Methodology for the construction of professional profiles based on the e-CF system" in order to define third generation professional profiles related with web profession. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : Z99 - Undetermined ORGANIZATION : UNI REGISTRATION DATE: 2017-01-31 COUNTRY : Italy PROJECT ID. : 01602666/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 269823816 TITLE : Unregulated professional activities - ICT professional profiles - Part 4: Information security professional profiles TITLE AMPLIF.: The present standardization proposal aims to use the tools provided by the related part 1 "Methodology for the construction of professional profiles based on the e-CF system" in order to define third generation professional profiles related with information security. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED

INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------

************************************************** page 24 * INFORMATION PROCEDURE. NOTIFICATIONS REGISTER * ************************************************** COUNTRY Lithuania -------------------------------------------------------------------------- SUBSECTOR : F12 - Information processing systems ORGANIZATION : LST REGISTRATION DATE: 2017-01-17 COUNTRY : Lithuania PROJECT ID. : 10002417/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: LST 10002417 TITLE : Information Technology. Coding of Lithuanian accented letters using several bytes TITLE AMPLIF.: This standard specifies coding of Lithuanian accented letters not covered by ISO/IEC 10646. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : F12 - Information processing systems ORGANIZATION : LST REGISTRATION DATE: 2017-01-17 COUNTRY : Lithuania PROJECT ID. : 10002418/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: LST 10002418 TITLE : Information Technology. Input of Lithuanian accented letters using the keyboard TITLE AMPLIF.: This standard specifies the input extension method for entering Lithuanian accented letters using the standard keyboard. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------

************************************************** page 25 * INFORMATION PROCEDURE. NOTIFICATIONS REGISTER * ************************************************** COUNTRY Netherlands -------------------------------------------------------------------------- SUBSECTOR : B07 - Glass ORGANIZATION : NEN REGISTRATION DATE: 2017-01-05 COUNTRY : Netherlands PROJECT ID. : 50002015/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 269823827 TITLE : Greenhouse glass - Determination of the light transmittance TITLE AMPLIF.: NEN 2675 gives measurement methods for the determination of the transmission and light diffusion of sun light greenhouse and screen materials. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------

************************************************** page 26 * INFORMATION PROCEDURE. NOTIFICATIONS REGISTER * ************************************************** COUNTRY Norway -------------------------------------------------------------------------- SUBSECTOR : A09 - Facility management ORGANIZATION : SN REGISTRATION DATE: 2017-01-09 COUNTRY : Norway PROJECT ID. : NOT17015/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 269823832 TITLE : Workplace environment - Process specification TITLE AMPLIF.: This document provides a process guidance for establishing workplace environment of office solutions. This document does not include workplace design for manufacturing and other production RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------

************************************************** page 27 * INFORMATION PROCEDURE. NOTIFICATIONS REGISTER * ************************************************** COUNTRY Poland -------------------------------------------------------------------------- SUBSECTOR : S24 - Soil quality ORGANIZATION : PKN REGISTRATION DATE: 2017-01-24 COUNTRY : Poland PROJECT ID. : 19001120/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 269823873 TITLE : Soil quality -- Assessment of the soil sanitary conditions -- Detection and quantitative determination of eggs of the intestinal parasites from species Ascaris, Trichuris and Toxocara in dehydrated sewage sudge TITLE AMPLIF.: This Standard specifies a method for detection and quantitative determination of eggs of the intestinal parasites from species Ascaris, Trichuris and Toxocara in dehydrated sewage sludge. This method is applicable for detection of eggs of intestinal parasites and determnination of quantity of viable eggs of these intestinal parasites of the species listed above per 1 kg of dry matter of the dehydrated sewage sludge, which allows for their parasitological assessment. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------

************************************************** page 28 * INFORMATION PROCEDURE. NOTIFICATIONS REGISTER * ************************************************** COUNTRY Slovakia -------------------------------------------------------------------------- SUBSECTOR : C01 C17 - Food products Trees and plants ORGANIZATION : UNMS REGISTRATION DATE: 2017-01-04 COUNTRY : Slovakia PROJECT ID. : 46600117/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: UNMS 46600117 TITLE : Cereals for human consumption. Part 2: Grain of wheat for human consumption TITLE AMPLIF.: The subject of revision of the Slovak Technical Standard for wheat will be changes in classes and parameters of wheat quality. Updated will be testing methods of parameters. The aim of revision will be better and more accurate characterization of the highest quality wheat to enhance competitiveness of this wheat. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------

************************************************** page 29 * INFORMATION PROCEDURE. NOTIFICATIONS REGISTER * ************************************************** COUNTRY Sweden -------------------------------------------------------------------------- SUBSECTOR : F20 - Quality assurance ORGANIZATION : SIS REGISTRATION DATE: 2017-01-26 COUNTRY : Sweden PROJECT ID. : 00624070/0002 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 269823851 TITLE : Quality management - The process for competence management TITLE AMPLIF.: Denna standard ger riktlinjer för kompetensförsörjningsprocessen och är tillämpbar på alla organisationer, oberoende av bransch, storlek och den produkt eller tjänst som tillhandahålls. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : I99 - Mechanical engineering undetermined ORGANIZATION : SIS REGISTRATION DATE: 2017-01-31 COUNTRY : Sweden PROJECT ID. : 00111185/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 269823847 TITLE : Identification marking for gas, liquid and ventilationg installations TITLE AMPLIF.: This standard specifies a separately cast test sample for evaluation of the nodularity of graphite in spheroidal graphite iron castings, with a maximum wall thickness of 20 mm. For heavy section spheroidal graphite castings the cast-on test sample according to SS-EN 1563:2012, Figure 4, is recommended. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------

************************************************** page 30 * INFORMATION PROCEDURE. NOTIFICATIONS REGISTER * ************************************************** SUBSECTOR : S99 - Health, environment and medical equipment undetermined ORGANIZATION : SIS REGISTRATION DATE: 2017-01-20 COUNTRY : Sweden PROJECT ID. : 08760120/0002 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 269823837 TITLE : Health care textiles - Trousers for staff TITLE AMPLIF.: This standard covers requirements and design specification for personnel trousers, designed as a working garment for staff in health care. The garment is designed to fit both men and women. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : S99 - Health, environment and medical equipment undetermined ORGANIZATION : SIS REGISTRATION DATE: 2017-01-20 COUNTRY : Sweden PROJECT ID. : 08760121/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: 269823842 TITLE : Health care textiles - Blouse for staff TITLE AMPLIF.: This standard covers requirements and design specification for personnel blouse, designed as a working garment for staff in health care. The garment is designed to fit both men and women. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------

************************************************** page 31 * INFORMATION PROCEDURE. NOTIFICATIONS REGISTER * ************************************************** COUNTRY TR -------------------------------------------------------------------------- SUBSECTOR : A05 - Maintenance services ORGANIZATION : TSE REGISTRATION DATE: 2017-01-13 COUNTRY : TR PROJECT ID. : t0114335/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: TSE t0114335 TITLE : Competent services - Blowers - Rules TITLE AMPLIF.: This standard includes rules for operating, structural feature, technical equipment, personnel specifications and certification of competent services of blowers. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : A05 - Maintenance services ORGANIZATION : TSE REGISTRATION DATE: 2017-01-13 COUNTRY : TR PROJECT ID. : t0114336/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: TSE t0114336 TITLE : Competent services - Engine Overhaul Machines - Rules TITLE AMPLIF.: This standard includes rules for operating, structural feature, technical equipment, personnel specifications and certification of competent services of Engine Overhaul Machines. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : A05 - Maintenance services ORGANIZATION : TSE REGISTRATION DATE: 2017-01-13 COUNTRY : TR PROJECT ID. : t0114337/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: TSE t0114337 TITLE : Competent services - Natural Gas Regulation Stations - Rules TITLE AMPLIF.: This standard includes rules for operating, structural feature, technical equipment, personnel specifications and certification of competent services of natural gas regulation stations. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------

************************************************** page 32 * INFORMATION PROCEDURE. NOTIFICATIONS REGISTER * ************************************************** SUBSECTOR : A11 A99 - Security Services Undetermined ORGANIZATION : TSE REGISTRATION DATE: 2017-01-13 COUNTRY : TR PROJECT ID. : tst12852/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: TSE tst12852 TITLE : Competent services - Stationary tanks, hydrophores and expansion tanks - Rules TITLE AMPLIF.: This standard includes rules for operating, structural feature, technical equipment, personnel specifications and certification of competent services of stationary tanks, hydrophores and expansion tanks RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : A11 - Security Services ORGANIZATION : TSE REGISTRATION DATE: 2017-01-27 COUNTRY : TR PROJECT ID. : t2013075/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: TSE t2013075 TITLE : Work Places-Foodstuffs transport services-General rules TITLE AMPLIF.: This standard includes, general rules for management, transport vehicles characteristics, foodstuffs transport serulces work places and personnel characteristics of raw, semi-product, food product material, food product additives, reserved for processing by-product and food pockages of work places - food stuffs transport services. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : A11 - Security Services ORGANIZATION : TSE REGISTRATION DATE: 2017-01-13 COUNTRY : TR PROJECT ID. : tst12831/0002 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: TSE tst12831 TITLE : Authorised services - Rules for switching and control equipments TITLE AMPLIF.: This standard includes rules for management, structural features, technical equipment, personnel specifications and certification of authorised services of switching and control Equipments. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------

************************************************** page 33 * INFORMATION PROCEDURE. NOTIFICATIONS REGISTER * ************************************************** SUBSECTOR : A11 - Security Services ORGANIZATION : TSE REGISTRATION DATE: 2017-01-13 COUNTRY : TR PROJECT ID. : tst13443/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: TSE tst13443 TITLE : Competent services - Rules for milling machines TITLE AMPLIF.: This standard includes rules for operating, structural feature, technical equipment, personnel specifications and certification of competent services of milling machines. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : A11 - Security Services ORGANIZATION : TSE REGISTRATION DATE: 2017-01-13 COUNTRY : TR PROJECT ID. : tst13559/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: TSE tst13559 TITLE : Authorised services - Rules for voltage regulators TITLE AMPLIF.: This standard includes microprocessor controlled voltage regulators competent authorized services' rules about technical equipment, operation management, structural situation and functions of staff. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : A11 - Security Services ORGANIZATION : TSE REGISTRATION DATE: 2017-01-13 COUNTRY : TR PROJECT ID. : tst13588/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: TSE tst13588 TITLE : Authorised services - Rules for satellite based positioning (GPS) and/or navigation equipments TITLE AMPLIF.: This standard includes satellite based positioning equipments authorised services rules about technical equipment, operation management, structural situation and functions of staff. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------

************************************************** page 34 * INFORMATION PROCEDURE. NOTIFICATIONS REGISTER * ************************************************** SUBSECTOR : C01 - Food products ORGANIZATION : TSE REGISTRATION DATE: 2017-01-27 COUNTRY : TR PROJECT ID. : t1004187/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: TSE t1004187 TITLE : Apricot Jam TITLE AMPLIF.: This Standard contains the apricot jams manufactured by using fruit of apricot (Prunus armeniaea L.) and does not contain special apricot jam manufactured for diet. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : C01 - Food products ORGANIZATION : TSE REGISTRATION DATE: 2017-01-27 COUNTRY : TR PROJECT ID. : t1005135/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: TSE t1005135 TITLE : Rose Jam TITLE AMPLIF.: This Standard contains the rose jams manufactured by using fruit of rose (Rose domescena M.) and does not contain special rose jam manufactured for diet. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : C01 - Food products ORGANIZATION : TSE REGISTRATION DATE: 2017-01-27 COUNTRY : TR PROJECT ID. : t1005136/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: TSE t1005136 TITLE : Figs Jam TITLE AMPLIF.: This Standard contains the figs jams manufactured by using fruit of figs (Ficus carica L.Domestica.) and does not contain special figs jam manufactured for diet. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------

************************************************** page 35 * INFORMATION PROCEDURE. NOTIFICATIONS REGISTER * ************************************************** SUBSECTOR : C01 - Food products ORGANIZATION : TSE REGISTRATION DATE: 2017-01-27 COUNTRY : TR PROJECT ID. : t1008761/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: TSE t1008761 TITLE : Canned Chick Peas With Vegetable Oil-Ready to Serve TITLE AMPLIF.: This standard applies to canned chick peas with vegetable oil which is ready to serve. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : C01 - Food products ORGANIZATION : TSE REGISTRATION DATE: 2017-01-27 COUNTRY : TR PROJECT ID. : t1009534/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: TSE t1009534 TITLE : Canned Stuffed Cabbage With Vegetable Oil- Ready to Serve TITLE AMPLIF.: This standard applies to canned stuffed cabbage with vegetable oil which is ready to serve. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : C01 - Food products ORGANIZATION : TSE REGISTRATION DATE: 2017-01-27 COUNTRY : TR PROJECT ID. : t1013573/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: TSE t1013573 TITLE : Workplaces - Consultancy services - The classification - General and spesific rules TITLE AMPLIF.: This standard includes general and spesific rules of workplaces of consultancy services and classification. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------

************************************************** page 36 * INFORMATION PROCEDURE. NOTIFICATIONS REGISTER * ************************************************** SUBSECTOR : C01 - Food products ORGANIZATION : TSE REGISTRATION DATE: 2017-01-27 COUNTRY : TR PROJECT ID. : t2003958/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: TSE t2003958 TITLE : Sour Cherry Jam TITLE AMPLIF.: This Standard comprises jams that are produced from cherry (Prunus cernausus L.), but doesn't comprise special cherry jam intended for diet. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : C01 - Food products ORGANIZATION : TSE REGISTRATION DATE: 2017-01-27 COUNTRY : TR PROJECT ID. : t2004186/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: TSE t2004186 TITLE : Strawberry Jam TITLE AMPLIF.: This Standard contains the jams manufactured by using fruit of strawberry (Fragaria vesca L.) and does not contain special strawberry jam manufactured for diet. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : C01 - Food products ORGANIZATION : TSE REGISTRATION DATE: 2017-01-27 COUNTRY : TR PROJECT ID. : t2004188/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: TSE t2004188 TITLE : Quince Jam TITLE AMPLIF.: This Standard contains the sour quince jams manufactured by using fruit of quince (Cydonia vulgaris Pers.) and does not contain special quince jam manufactured for diet. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------

************************************************** page 37 * INFORMATION PROCEDURE. NOTIFICATIONS REGISTER * ************************************************** SUBSECTOR : C01 - Food products ORGANIZATION : TSE REGISTRATION DATE: 2017-01-27 COUNTRY : TR PROJECT ID. : t2009255/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: TSE t2009255 TITLE : Cabbage- Frozen TITLE AMPLIF.: This standard applies to frozen cabbage. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : C01 - Food products ORGANIZATION : TSE REGISTRATION DATE: 2017-01-27 COUNTRY : TR PROJECT ID. : t2009974/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: TSE t2009974 TITLE : Frozen Green Broad Beans TITLE AMPLIF.: This standard applies to frozen green broad beans. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : C01 - Food products ORGANIZATION : TSE REGISTRATION DATE: 2017-01-27 COUNTRY : TR PROJECT ID. : t2012915/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: TSE t2012915 TITLE : Canned Pears TITLE AMPLIF.: This standard covers canned pears RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------

************************************************** page 38 * INFORMATION PROCEDURE. NOTIFICATIONS REGISTER * ************************************************** SUBSECTOR : C01 - Food products ORGANIZATION : TSE REGISTRATION DATE: 2017-01-27 COUNTRY : TR PROJECT ID. : t2012916/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: TSE t2012916 TITLE : Canned Asparagus TITLE AMPLIF.: This standard covers canned Asparagus RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : C01 - Food products ORGANIZATION : TSE REGISTRATION DATE: 2017-01-27 COUNTRY : TR PROJECT ID. : t2012928/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: TSE t2012928 TITLE : Canned corn TITLE AMPLIF.: This standard covers canned corn RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : C01 - Food products ORGANIZATION : TSE REGISTRATION DATE: 2017-01-27 COUNTRY : TR PROJECT ID. : t3001467/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: TSE t3001467 TITLE : Canned Okras TITLE AMPLIF.: This standard applies to canned okras. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------

************************************************** page 39 * INFORMATION PROCEDURE. NOTIFICATIONS REGISTER * ************************************************** SUBSECTOR : C02 N01 - Paints and related products Paper and board ORGANIZATION : TSE REGISTRATION DATE: 2017-01-27 COUNTRY : TR PROJECT ID. : tst11653/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: TSE tst11653 TITLE : Calcite- Used for Paper Industry TITLE AMPLIF.: This standard covers the precipite and natural calcite in paper inustry used as coating or filling materials. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : C20 - Explosives and fireworks ORGANIZATION : TSE REGISTRATION DATE: 2017-01-13 COUNTRY : TR PROJECT ID. : t0112743/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: TSE t0112743 TITLE : Mine action - Post-clearance documentation TITLE AMPLIF.: This standard provides guidance on the procedural requirements for the handover of cleared land, and details responsibilities and obligations. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : I02 M01 - Fasteners Steel ORGANIZATION : TSE REGISTRATION DATE: 2017-01-27 COUNTRY : TR PROJECT ID. : tst01030/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: TSE tst01030 TITLE : Plugs With Metric Fine Thread TITLE AMPLIF.: This standard cover fine threaded metric plugs as shown in the standard. I does not cover other types of plugs. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------

************************************************** page 40 * INFORMATION PROCEDURE. NOTIFICATIONS REGISTER * ************************************************** SUBSECTOR : I02 M01 - Fasteners Steel ORGANIZATION : TSE REGISTRATION DATE: 2017-01-27 COUNTRY : TR PROJECT ID. : tst12432/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: TSE tst12432 TITLE : Hexagon fit bolts for structural steel bolting for supply with or without nut TITLE AMPLIF.: This standard specifies requirements for M12 to M30 hexagon fit bolts assigned to product grade C for use in structural steel bolting. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : I02 M01 - Fasteners Steel ORGANIZATION : TSE REGISTRATION DATE: 2017-01-27 COUNTRY : TR PROJECT ID. : tst12433/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: TSE tst12433 TITLE : Reduced shank bolts and screws with coarse thread TITLE AMPLIF.: This standard specifies requirements for M2,5 to M30 bolts and screw (bolts, for short) with various head styles and a diameter of the unthreaded portion of the shank smaller than the minor diameter. Alt hough such bolts have a reduced shank, they are not waisted shank bolts. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : N05 - Textiles ORGANIZATION : TSE REGISTRATION DATE: 2017-01-13 COUNTRY : TR PROJECT ID. : tst09500/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: TSE tst09500 TITLE : Textiles- Handkerchief TITLE AMPLIF.: This standard specifies the description, classification and characteristics, sampling, inspection and marketing of handkerchief RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------

************************************************** page 41 * INFORMATION PROCEDURE. NOTIFICATIONS REGISTER * ************************************************** SUBSECTOR : N05 - Textiles ORGANIZATION : TSE REGISTRATION DATE: 2017-01-13 COUNTRY : TR PROJECT ID. : tst11048/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: TSE tst11048 TITLE : Textiles - Bedspread fabrics - Woven, knitted or flocked TITLE AMPLIF.: This standard specifies the description, classification and characteristics, sampling, inspection and marketing of woven, knitted or flocked bedspread fabrics RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : N05 - Textiles ORGANIZATION : TSE REGISTRATION DATE: 2017-01-13 COUNTRY : TR PROJECT ID. : tst11156/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: TSE tst11156 TITLE : Textiles - Lining fabrics - Woven TITLE AMPLIF.: This standard specifies the description, classification and characteristics, sampling, inspection and marketing of woven lining fabrics RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : N05 - Textiles ORGANIZATION : TSE REGISTRATION DATE: 2017-01-13 COUNTRY : TR PROJECT ID. : tst11266/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: TSE tst11266 TITLE : Textiles - Skirt, dress, trousers and blouse fabrics for women and girls - Knitted TITLE AMPLIF.: This standard specifies the description, classification and characteristics, sampling, inspection and marketing of knitted skirt, dress, trousers and blouse fabrics for women and girls RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------

************************************************** page 42 * INFORMATION PROCEDURE. NOTIFICATIONS REGISTER * ************************************************** SUBSECTOR : N09 N14 - Plastics Plastics pipes ORGANIZATION : TSE REGISTRATION DATE: 2017-01-13 COUNTRY : TR PROJECT ID. : t0114298/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: TSE t0114298 TITLE : Plastics floating floor supports - Used in closed and open areas TITLE AMPLIF.: This standard covers of plastics floating floor supports of closed and open areas RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : N09 - Plastics ORGANIZATION : TSE REGISTRATION DATE: 2017-01-13 COUNTRY : TR PROJECT ID. : t0114313/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: TSE t0114313 TITLE : Floors in working places and areas with slip and fall risks - General requirements and testing TITLE AMPLIF.: This standard specifies criteria on suitable floor cover selection, design of floors, and means to be taken in working places and areas. This standard covers the floors which comes in contact with slippery materials due to occupational or operational activities and have slip and fall risk potential in working places and areas. This standard does not cover the floors which are used in dry condition and have slip and fall risk potential that does not originate from slippery materials. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------

************************************************** page 43 * INFORMATION PROCEDURE. NOTIFICATIONS REGISTER * ************************************************** SUBSECTOR : N14 S20 - Plastics pipes Waste collection, handling and transportation ORGANIZATION : TSE REGISTRATION DATE: 2017-01-13 COUNTRY : TR PROJECT ID. : t0116259/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: TSE t0116259 TITLE : Medical waste collection bag - Polyethylene (Pe) TITLE AMPLIF.: This standard covers general specification and test methods of bags made from plastic sheets for using pre-collection, collection of medical waste or collection of special medical waste. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : S09 - Water quality and water supply ORGANIZATION : TSE REGISTRATION DATE: 2017-01-13 COUNTRY : TR PROJECT ID. : tst12587/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: TSE tst12587 TITLE : Railway Vehicles-Power Supply Installations For Passenger TITLE AMPLIF.: This standard, covers general prousions with which the coaches power supply installations must comply and specific definations for components which standardisation is sought. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------ SUBSECTOR : W08 - Electric cables ORGANIZATION : TSE REGISTRATION DATE: 2017-01-13 COUNTRY : TR PROJECT ID. : t0113888/0001 NEW PROJECT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NATIONAL REF.: TSE t0113888 TITLE : 0,6/1 KV Cables, Aerial Bundled Cable TITLE AMPLIF.: This standard covers aerial bundled cables having 0,6/1 kV and with plastic insulated aluminium phase conductors twisted around an uninsulated messenger. RELATEDNESS ----------- NATIONAL : NEW REGIONAL : NOT RELATED INTERNATIONAL: NOT RELATED ------------------------------------------------------------------------