+ All Categories
Home > Technology > Infrared Technology - Seeing the Invisible (Part One: Physics)

Infrared Technology - Seeing the Invisible (Part One: Physics)

Date post: 18-Jul-2015
Category:
Upload: allied-vision
View: 1,219 times
Download: 0 times
Share this document with a friend
7
Infrared Imaging: Seeing the Invisible Part One: Physics
Transcript
Page 1: Infrared Technology - Seeing the Invisible (Part One: Physics)

Infrared Imaging: Seeing the Invisible

Part One:

Physics

Page 2: Infrared Technology - Seeing the Invisible (Part One: Physics)

What Can You See in These Images?

NIR / SWIR LWIR Visible

Page 3: Infrared Technology - Seeing the Invisible (Part One: Physics)

Electromagnetic Spectrum:

A Helpful Taxonomy

Page 4: Infrared Technology - Seeing the Invisible (Part One: Physics)

IR Radiation - Characteristics

• Invisible to the human eye … but not to certain sensors

• Caused by the vibration and rotation of atoms and molecules

• Emitted from all objects with a temperature above 0 K (-273 °C)

• Interacts like other electromagnetic radiation, including:

Page 5: Infrared Technology - Seeing the Invisible (Part One: Physics)

Reference temps: White hot steel ~1200 °C Melting point of aluminum 660 °C Water boils at 100 °C Uncooled camera at 38 °C Human body at 37 °C, radiates at ~ 10 μm Water freezes at 0 °C

IR Energy vs. Object Temperature

Page 6: Infrared Technology - Seeing the Invisible (Part One: Physics)

Measuring Temperatures

• Emissivity: ratio of actually emitted energy to energy radiated by a black body at same temperature

– Black body by definition ɛ = 1

– In general the duller and blacker, the closer to ɛ = 1

– The more reflective, the less emissive

• Knowing emissivity permits absolute temperature measurement

Page 7: Infrared Technology - Seeing the Invisible (Part One: Physics)

Allied Vision Technologies GmbH Taschenweg 2a 07646 Stadtroda, Germany Tel.: +49 36428 / 677-0 Fax: +49 36428 / 677-24

[email protected] www.alliedvisiontec.com

Follow us:


Recommended