ABS EUROPE LTD.
No. 1 FRYING PAN ALLEY, LONDON, ENGLAND, E1 7HRTEL: 44-20-7247-3255 FAX: 44-20-7247-3053 Email: [email protected] www.eagle.org
TRAVI E PROFILATI DI PALLANZENO S.R.L. (438683)
VIA DIAZ 248,
SAN ZENO NAVIGLIO 25010,
ITALY
Reference:
Project Number:
Certificate no:
NE/NV T1576979
3823842
FDRY - 1576979
ATTN: Mr. Massimo Rolandi
Initial Steel Casting Facility and Process Approval
ABS Approval of Travi E Profilati Di Pallanzeno, S.R.L.
San Zeno Naviglio, Italy
We have the ABS plant survey report BO3205732 dated 18 October 2016, along with your submittals of 25
October and 17 November 2016 together with enclosures relative to the subject. With regard thereto we
advise that Travi E Profilati Di Pallanzeno, S.R.L., San Zeno Naviglio, Italy is considered approved to produce
hull and machinery castings to the requirements of ABS Materials & Welding Rules Part 2 (2016) as outlined
below, provided the Rules are adhered to in all respects and all production, testing and inspection are to
the satisfaction of the attending ABS Surveyor.
Grade : Non ABS Grades - Carbon, Carbon - Manganese & Alloy Steels
Melting Practice : EAF
Casting Practice : Continuous Casting
Maximum Weight : 12000 kg
Maximum Thickness/Diameter : 500 mm
Heat treatment facility : N/A
Application Examples : Semi-finished products: square and rectangular blooms, square
billets and rounds
Weld repairs and PWHT, if applicable, to ABS certified castings are to be approved prior to commencing the
repair and carried out in accordance to ABS rules to the satisfaction of the attending Surveyor. Weld repairs
are to be recorded on a map and included with the casting documentation.
The approval is valid for five years subject to annual endorsement survey and will expire on 17 October
2021. Please note it is the responsibility of the facility to inform ABS of any changes to the manufacturing
parameters and request annual endorsement survey or renewal of approval prior to the five year expiry
date.
Electronically published by ABS London. Reference T1576979, dated 23-NOV-2016.
ABS EUROPE LTD.
No. 1 FRYING PAN ALLEY, LONDON, ENGLAND, E1 7HRTEL: 44-20-7247-3255 FAX: 44-20-7247-3053 Email: [email protected] www.eagle.org
An electronic copy of the drawings, appropriately stamped, is available through the ABS Eagle Construct
Engineering Manager (O2E) Web portal. If you need to contact ABS regarding this review please email Nina
Edmonds at [email protected] or Nikolaos Vrellos at [email protected]. Our invoice to cover the costs
of the technical review is subject to separate correspondence.
Very truly yours
Dimitrios G. Kostaras
Vice President of Engineering
ABS Europe Ltd.
___________________________
Nikolaos Vrellos
Principal Engineer, Materials
London Offshore Engineering Department
CC: ABS Milan
EC: ABS Houston Materials Dept.
Electronically published by ABS London. Reference T1576979, dated 23-NOV-2016.
ABS EUROPE LTD.
No. 1 FRYING PAN ALLEY, LONDON, ENGLAND, E1 7HRTEL: 44-20-7247-3255 FAX: 44-20-7247-3053 Email: [email protected] www.eagle.org
Drawing List
Engineering Office: London Engineering Department
Submitter: TRAVI E PROFILATI DI PALLANZENO S.R.L. (438683)
Drawing No Revision No Drawing Title
Correspondence - ABS London Plan Approval Request Form
BO3205732 - Plant Survey
MMdb approval requirements Casting - MMdb requirements
Correspondence - Purchase order
Reference combined - Reference docs
Review combined - Review docs
Certificato T500 - Thickness up to 500mm
Electronically published by ABS London. Reference T1576979, dated 23-NOV-2016.
CERTIFICATE OF FOUNDRY FACILITY AND PROCESS APPROVAL
This is to certify that a representative of ABS did, at the request of
TRAVI E PROFILATI DI PALLANZENO S.R.L.VIA DIAZ 248, SAN ZENO NAVIGLIO, Italy, 25010
attend its facilities as indicated in the ABS Milano Port port office survey report number 3205732 dated 18
October 2016 in order to carry out a survey of the facilities and associated quality procedures. The facility is
considered capable of manufacturing
Steel Casting components for marine applications
in accordance with the ABS Approval letter (Reference T1576979), ABS Rules, designated standards and
ABS approved drawings. The approval is valid till 17 October 2021 subject to adherence to relevant ABS
Rules, Survey requirements and annual endorsement by an ABS representative.
CERTIFICATE NUMBERFDRY-T1576979
ISSUING OFFICELondon EngineeringDepartment
_____________________________________Marcus CridlandChief Metallurgist, ABS
ISSUE DATE: 18 October 2016EXPIRY DATE: 17 October 2021
FIRST ANNUALENDORSEMENT:
SECOND ANNUALENDORSEMENT:
THIRD ANNUALENDORSEMENT:
FOURTH ANNUALENDORSEMENT:
MAR A CERT R1