Specifications of Single Container Water Hammer Tester
Specifications
Precautions
1. Testable Glass Bottle
Neck Diameter : MIN.Φ21mm MAX.Φ54mm
**For use of any dimension out of these dimensions, a consultation is required.
Weight : MAX.1300g
(containing closure + liquid content + glass bottle)
Bottle Height : MAX.400mm
Body Diameter : MAX.Φ85mm (without antiscattering cover: MAX.Φ105mm)
2. Supply Energy
Compressed Air (0.2 ~ 0.3Mpa)
1. The user shall always wear safety protective equipments (full-face mask and gloves) when he uses the tester
for protection from scattering glass.
2. The user shall take measures to prevent the hammer from dropping when he sets a glass bottle on the tester
under the hammer.
3. The user shall pay attention to around the tester, where glass may scatter during operation of the tester.
Single Container Water Hammer
Tester
Innovative testing device for
water hammer strength of glass containers
JPN PAT.No 4523631
Copyright © 2015 Toyo Glass Co., Ltd.
Overseas Business Department Production and Technology DivisionTEL: +81-3-4514-2068 FAX: +81-3-4514-2085Email : [email protected]
URL : http://www.toyo-glass.co.jp
Osaki Forest Bldg., 2-18-1 Higashi-Gotanda, Shinagawa-ku, Tokyo 141-0022, Japan
http://www.toyo-glass.co.jp
Air cylinder for hammer lifting Hammer
gripper
Pressure reducing valve
Gripper opening/closing valve
Falling energy setting gauge
Hammer lifting button
Bottle finish clamper
Bottle jacket
Wheel
Level adjuster
Level
Hammer
Bottle top position adjustment
Weight: approx. 120kg
1650