5/20/2018 Inox_UK

1/12

StainlessSteel

SCHMOLZ + BICKENBACH Distributions GmbH

Eupener Strae 70

D-40549 Dsseldorf

www.schmolz-bickenbach.de

02/2010 Subject to alterations. Errors and omissions excepted.

5/20/2018 Inox_UK

2/12

with the suitable steel at whatever location. This

even applies to small lot production.

Should a requested grade be temporarily out

of stock, our global logistics are so organized

that we are in a position to supply you with the

needed material as rapidly as possible and

just-in-time where required.

Furthermore, you can make the best use of

our extensive range of services starting with

technical advice from highly qualified teams of

engineers through to the most diverse processing

options (for details see pages 16 17).

In the areas of tubes, long and flat products

made from stainless steel, we offer you a

product portfolio and a stock diversity

unparalleled in Europe.

Regardless whether a countrys specific steel

standards or customized special materials for

crucial components are concerned, you can be

assured that SCHMOLZ + BICKENBACH is a

competent business partner for every steel

solution and that includes supplying your

ready-to-install workpiece if required.

We offer a complete service spectrum ranging

from production and processing through to

distribution. As an international distribution

company, we source steel from our own

production units or on the best possible terms

globally through external suppliers.

Our longstanding cooperation with renowned

steel producers ensures constant quality

standards. At SCHMOLZ + BICKENBACH,

these manufacturers as well as the steels they

produce are subject to continuous controls in

order to guarantee that unwavering standards

are met on an ongoing basis. We take this to

the point that we certify our producers together

with you, if requested.

In this manner every single one of our stainless

steels fulfils the most stringent quality demands

made in the field of mechanical engineering

and by the automotive industry.

Our finely tuned range of services offers you

the advantage of always receiving quality-tested

steel products from a single source worldwide.

Through our extensive distribution network,

we ensure that any business can be supplied

It is not only our clients diverse requirements that

have contributed to our company becoming one

of the worlds largest producers, processors and

distributors of long products made from specialty

steel but also our longstanding tradition spanning

more than 150 years.

Today we are in a position to supply nearly the entire range of stainless

steels obtainable in the most diverse qualities and sizes, with more

than 70,000 stock-on-hand items ensuring short-term availability.

Our extensive product portfolio is supplemented by a comprehensive

service programme. This includes advisory services, wide-ranging

processing and logistic solutions which offer you maximum flexibility

from start to finish.

So as to respond to your requirements even more efficiently and to let

you increasingly benefit from our know-how of local and international

markets, we are constantly expanding our distribution network. As a

result, we are where you need us in all the significant markets worldwide.

Quality andproductdiversity thatset standards

02 03

The perfect stainless steel for every application

5/20/2018 Inox_UK

3/12

Stainless rolled and forged products

When it comes to stainless long products,

SCHMOLZ + BICKENBACH has some of the

world's largest stock at its disposal. In addition

to the complete range of standard dimensions,

we offer special articles such as I and I-beam

sections.

Not only do we supply conventional bar stock,

but also semi-finished products and wire rod.

At SCHMOLZ + BICKENBACH all stainless

rolled and forged products are not only

obtainable individually cut where requested

but also as just-in-time deliveries.

Our stainless hot bars are supplied as ferritic,

martensitic, duplex or austenitic steel and are

manufactured according to EN 10088-3/EN

10272 norms.

For details about our materials, please see

the table on pages 18 19.

Certification: EN 10204/3.1

AD 2000-W2/W10.

Special certifications such as TV, GL, DNV,

BV are available on request.

Bars come in fixed lengths or between 3 m

and 6 m.

Ground on all sides, edges chamfered, ends cut, 50 350 mm

squares are ideal for rolling, forging and upsetting

Billets

Hot-rolled, annealed or quenched, pickled; dimensions:

5.5 32 mm round, coil weight approx. 1000 kg

Wire rod

Round bar

Square bar

Flat bar

Angle steel

Profile steel

8 700 mm rounds, rolled or forged, tolerance: EN 10060

(formerly DIN 1013) or half EN, surface finish: descaled and peeledand turned

50 700 mm squares, rolled or forged, tolerance:

EN 10059 (formerly DIN 1014) or 7527.6 forged, surface finish:

pickled or descaled

10 x 3 mm 200 x 40 mm flats rolled and pickled or cut from

sheet, tolerance: EN 10058 (formerly DIN 1017)

10 x 10 x 2 mm 120 x 120 x 10 mm equal angle, rolled,

tolerance: DIN 1028, surface finish: pickled

Unequal angles, 40 x 20 x 4 mm 100 x 50 x 6 mm,

tolerance: DIN 1029

T-section, 30 x 30 x 4 mm 100 x 100 x 10 mm, tolerance:

similar to DIN 1024

Channel section, 40 x 20 x 4 x 4 mm 100 x 50 x 6 x 8.5 mm,

tolerance: similar to DIN 1026Special sections according to drawings

Hot bars

Stainless steel long products

04 05

5/20/2018 Inox_UK

4/12

special chemical compositions and a controlled

production process when producing in our

own works.

The process, which becomes especially

apparent with machinability, guarantees best

working results for the bright steel grades we

manufacture.

Stainless bright bars

Due to its inherent dimensional accuracy and

surface quality, stainless bright steel is nowadays

a preferential choice in the automotive industry

and for mechanical engineering purposes.

So as to meet the highest functionality

requirements, metal cutting or metal forming

is used to process stainless bright bars into

ready-to-fit precision parts.

In addition to rounds, piston rods, squares,

hexagons, flats and profiles made from stainless

bright bars, the SCHMOLZ + BICKENBACH

product portfolio also includes stainless bright

wire which we supply as fine wire, bright wire,

extrusion wire, cold heading wire and spring

wire.

The stainless bright bars SCHMOLZ +

BICKENBACH supplies are manufactured as

per EN 10088-3 /EN 10272. For details on

our materials please see the tables on pages

18 19.

Certification: EN 10204 / 3.1,

AD 2000 - W2 / W10.

Special certifications such as TV, GL, DNV,

BV are available on request.

Bars come in 3 m or fixed lengths.

Round bar

Piston rod

Hexagonal bar

Square bar

Flat bar

Profile steel

0.8 130 mm rounds, drawn or peeled, ground or ground and

polished tolerance: EN 10278-h 11 h 6 or special tolerances

5 120 mm rounds (packed in cases and protected with

plastic rings), ground or ground and polished, tolerance

according to customer request

3 55 mm, cold-drawn, tolerance: EN 10278-h 11

(formerly DIN 176)

2 55 mm, cold-drawn, tolerance: EN 10278-h 11

(formerly DIN 178)

15 x 10 100 x 20 mm, cold-drawn, tolerance: EN 10278-h 11

(formerly DIN 174)

Extruded, cold-drawn or cold-rolled, tolerance according to

customer request

Bright bars

Stainless steel long products

Without the

utilization of

stainless steel,

production parts

used in mechanical

engineering or in the

furniture industry

such as with the

Rolf Benz 310

armchair shown

above would be

unthinkable.

06 07

As a matter o f principl e, SCHMOLZ +

BICKENBACH only supplies stainless long

products featuring improved machinability

as represented for example by our RASIMATM

and NirocutTM grades.

To ensure that the quality demands we make

on our products are always met, we apply

5/20/2018 Inox_UK

5/12

Our extensive flat products portfolio contains

hot and cold-rolled sheet as well as surface-

finished sheet and diverse specialities such as

quarto plate, tear plate and decorative plates.

SCHMOLZ + BICKENBACH supplies stainless

flat products as ferritic, austenitic and duplex

steels manufactured as per EN 10088-2.

For details on our materials please see table

on pages 18 19.

Certification:EN 10204/ 3.1, AD2000- W2/ W10.

Special certifications such as TV, GL, DNV,

BV are available on request.

Steel grades

Certification

Dimensions

Sizes

Finish

1.4016 / 1.4301 / 1.4307 / 1.4404 / 1.4509 / 1.4541 / 1.4571 / 1.4878;

for others see table on pages 18 19; tolerances as per DIN 10259

(EN ISO 9445)

EN 10204/3.1, AD 2000-W2/W10

Thickness between 0.5 mm and 8.0 mm

1000 x 2000 mm / 1250 x 2500 mm / 1500 x 3000 mm /

2000 x 4000 mm / 2000 x 6000 mm

2B = cold-rolled / 2R = bright-annealed

Cold-rolled sheet

Grinded sheet

Brushed sheet

Duplo grinded sheet

Foiled sheet

Size

Grinding at grit size 80, 180, 240, 320, 400 or as per customer request

After grit 180, 240

Combined grinding and brushing (referred to as 'Duplo')

as per customer request

Laser foil, transparent foil, laserable standard foil 80 or 100 or any

other required foil type

Max. 1.500 x 4.000 mm

Processed sheet

Stainless steel flat products

08 09

Neues Foto !!!!!!!!!!

Steel grades

Certification

Dimensions

Sizes

Finish

1.4301 / 1.4307 / 1.4404 / 1.4541 / 1.4571; for others see table

on pages 18 19; tolerances as per DIN 10029 / 10051

EN 10204/3.1, AD 2000-W2/W10

Thickness between 3.0 mm and 13.0 mm

1000 x 2000 mm / 1250 x 2500 mm / 1500 x 3000 mm /

2000 x 4000 mm / 2000 x 6000 mm

1D = hot-rolled

Hot-rolled sheet

5/20/2018 Inox_UK

6/12

Quarto plate

In contrast to continuously rolled steel strip and

irrespective of the steel grade, quarto plate is

rolled in a four-high mill as singular or combined

plate. Its main application areas include oil and

gas production plants, chemical tankers as

well as in the paper and pulp industries.

Processing 1.4529 / 1.4539 / 1.4713 / 1.4724 / 1.4828 / 1.4841 from delivery

at short notice or from stock

Special grades

Beside standard sizes, we also offer sheet in fixed lengths or fixed sizes for delivery at short notice

or from stock.

Steel grades

Certification

Dimensions

Sizes

Finish

1.4301 / 1.4571; for others see table on pages 18 19.

Tolerances as per DIN 10029 A-D

EN 10204 / 3.1, AD 2000-W2 and over 35 mm as per 3.2 (German TV)

Thickness between 15.0 mm and 50.0 mm

1000 x 2000 mm / 1250 x 2500 mm / 1500 x 3000 mm /

1500 x 6000 mm / 2000 x 4000 mm / 2000 x 6000 mm

1D = hot-rolled

Quarto plate

Steel grades

Certification

Dimensions

Sizes

Finish

1.4301 / 1.4571; for others see table on pages 18 19; tolerances as

per EN 10051

EN 10204 / 3.1 certifying skid resistance up to R11 rating

Thickness between 3.0 mm and 8.0 mm

1000 x 2000 mm / 1000 x 3000 mm / 1250 x 2500 mm /

1250 x 3000 mm / 1500 x 3000 mm

1D = hot-rolled

Tear plate

Steel grades

Dimensions

Finish

1.4301 / 1.457; for others see table on pages 18 19.

Tolerances as per DIN 10058, length of bar 4 6 m

20.0 x 10.0 mm 200.0 x 10.0 mm

Cut from sheet / strip /1D = hot-rolled / 2B = cold-rolled or as per

customer request

Slitted flats from our own production

Decorative Patterns: AN2, AN5, AN6

Designs: checks, diamonds, linen, leather

Pattern-rolled sheet and decorative plates

Stainless steel flat products

10 11

5/20/2018 Inox_UK

7/12

SCHMOLZ + BICKENBACH commands one

of the most diverse stock ranges of stainless

welded beverage tubes, conduits, structural

and profile tubes available.

Our central and fully automated high-bay

warehouse in Dsseldorf has, for example,

more than 3,200 cassettes. Since every single

cassette can be partitioned into four, this gives

us the opportunity to stock several thousand

items and batches in the most diverse finishes.

Further cassette storage locations of this kind

are situated at our other branches, enabling

just-in-time deliveries at regional level too.

To round up our extensive portfolio, we also

offer fixed lengths and grinding services.

The manufacturi ng of welded cond uits and

beverage tubes from stainless steel has to

fulfil extremely high demands during the

production stage, especially as these kinds of

tubes are used for the transportation and

storage of corrosive, inflammable and toxic

fluids as well as gases and solids.

Quality and processing requirements made of

such special steels are especially high when the

tubes are used for hygienic applications such

as drinking water installations or equipment

employed in the food or pharmaceutical

industries.

Apart from the quality factor, product diversity

plays a decisive role and is of importance

everywhere where tubes fulfil structural or

decorative roles, such as in architecture or in

the furniture industry.

Standards

Tolerances

Materials

Dimensions

Finish

EN 10217-7 TC1 or TC2 and AD 2000 W2, V = 1.0

As per EN ISO 1127

1.4301/ 1.4307/ 1.4404/ 1.4541/ 1.4571

6.0 x 1.0 mm 88.9 x 5.0 mm

Bright-annealed or annealed and pickled, also polished

(e.g. grit size 240 or as per customer request)

Stainless steel tubes

12 13

Welded, annealed process tubes

Standards

Tolerances

Materials

Dimensions

Finish

EN 10217-7 TC1 or TC2 and AD 2000 W2, V = 1.0

As per EN ISO 1127

1.4301/ 1.4307/ 1.4404/ 1.4541/ 1.4571

6.0 x 1.0 mm 609.6 x 4.0 mm

Unannealed, bright or pickled, also polished (e.g. grit size 240 or as per

customer request)

Welded, unannealed process tubes

Standards

Tolerances

Materials

Dimensions

Finish

EN 10296-2, weld factor V = 0.85

As per EN ISO 1127

1.4301

8.0 x 1.0 mm 129.0 x 2.0 mm

Unannealed and also polished (e.g. grit size 240 or as per customer request)

Welded construction and decoration tubes

5/20/2018 Inox_UK

8/12

Steel grades

Dimensions

Finish

1.4301; for others see table on pages 18 19.

20 x 1.5 mm/ 22 x 1.5 mm/23 x 1.5 mm/ 25 x 1.5 mm/25 x 2.0 mm/

30 x 1.5 mm/ 30 x 2.0 mm/40 x 2.0 mm

Annealed, ground and polished

Welded handrail tubes

Materials

Dimensions

Finish

1.4301/ 1.4404/ 1.4509/ 1.4571

10.0 x 10.0 x 1.0 mm 200.0 x 200.0 x 10.0 mm

20.0 x 10.0 x 1.0 mm 300.0 x 150.0 x 10.0 mm

Unannealed, also polished (e.g. grit size 240 or as per customer request)

Welded square and rectangular tubes In most diverse finishes and dimensions on request

Seamless tubes and hollow bars

Stainless steel tubes

14 15

Standards

Tolerances

Materials

Dimensions

Finish

DIN 11850

As per EN ISO 1127

1.4301/ 1.4307/ 1.4404/ 1.4571

18.0 x 1.0 mm 204.0 x 2.0 mm

BC, CC, BD, CD

Welded dairy tubes

On request, welded heat-resistant tubes, bright tubes for handrails as well as tube fittings are

available at short notice.

Dimensions

Dimensions

Between 40.0 x 10.0 x 1.5 mm and 80.0 x 20.0 x 2.0 mm

Including 10 mm wall (e.g. 100.0 x 100.0 x 10.0 mm)

Speciality: flat profile tubes

Speciality: thick-wall tubes for steel construction

5/20/2018 Inox_UK

9/12

Processing of stainless steel long products

Among other products, we manufacture shafts

and axles for processing by the final customer

in the automotive industry, which are achieved

by cutting and deburring, or through complex

end machining such as facing, chamfering and

centering.

We offer customized processing in the areas

of bevelling, drilling, deburring, chamfering,

milling, facing, polishing, cutting, peeling,

grinding and centering.

Processing of stainless steel flat products

Our surface treatment of sheets up to 1500 mm

x 4000 mm comprises grinding (grit sizes 80,

180, 240, 320 or 400), brushing, combined

grinding and brushing (i.e. 'Duplo') and foiling

with every usual type of foil.

We cut and bend sheet up to thicknesses of

15 mm and to maximum lengths of 6000 mm.

Our bending press enables us to process flat

material into U, C and Z profiles. Custom profiles

are manufactured to customer drawings.

Flat material up to thicknesses of 15 mm and

widths of 250 mm can be processed on our

straightening unit.

We plasma-cut parts with maximum dimensions

of 3000 mm x 14000 mm and to a maximum

thickness of 50 mm using under-water

technology.

Any type of processing, such as drilling, milling

and laser and water jet cutting techniques can

additionally be offered as special treatment. In

particular with slitting we are in a position to meet

virtually any requirement that is technically feasible.

Processing of stainless steel tubes

With our fixed length service, which uses

the most modern saws, we can manufacture

any length required for round, square and

rectangular tubes at short notice.

We miter cut according to your drawings for

round, square and rectangular tubes.

On our polishing facilities round, square and

rectangular tubes can be ground from grit

sizes between 80 and 600.

Our polishing service enables tubes to be

finished in either polished or mirror-polished

condition.

So as to manufacture complex shapes, our

automated hydroforming plant facilitates internal

high-pressure metal forming (preforming, bending,

laser cutting, cutting to size and washing).

Processing service center

SCHMOLZ + BICKENBACH is not only foremost

in the production and storage of stainless

steel but time after time sets standards in the

quality of the services provided.

With the employment of state-of-the-art facilities,

our processing centres enable us to realize

customized solutions in every area including:

folding

bevelling, chamfering and deburring

bending

drilling

brushing, grinding and foiling

fixed length services

milling

miter cuts on tubes

thread cutting

laser processing

facing

plasma cutting

straightening

sawing, cutting and shearing

peeling

punching

centering

drawing

Processing

16 17

5/20/2018 Inox_UK

10/12

1)AISI = American Iron and Steel Institute. 2) SS = Swedish Standard. 3)AFNOR = Association Franaise de

Normalisation. 4) BS = British Standard.

In comparison to German grades, some of those described by other standards can only be approximately

equated. The interchangeability of a specific material has to be weighed up on a case by case basis.

International grades

18 19

Material DIN AISI1) SS2) AFNOR3) BS4)

1.4005

1.4006

1.4016

1.4021

1.4028

1.4034

1.4057

1.4104

1.4105

1.4112

1.4113

1.4114

1.4122

1.4125

1.4301

1.4303

1.4305

1.4306

1.4307

1.4310

1.4313

1.4362

1.4401

1.4404

1.4418

1.4435

X 12 CrS 13

X 12 Cr 13

X 6 Cr 17

X 20 Cr 13

X 30 Cr 13

X 46 Cr 13

X 17 CrNi 16-2

X 14 CrMoS 17

X 6 CrMoS 17

X 90 CrMoV 18

X 6 CrMo 17-1

X 6 CrMoS19-2

X 39 CrMo 17-1

X 105 CrMo 17

X 5 CrNi 18-10

X 4 CrNi 18-12

X 8 CrNiS 18-9

X 2 CrNi 19-11

X 2 CrNi 18-9

X 10 CrNi 18-8

X 3 CrNiMo 13-4

X 2 CrNiN23-4

X 5 CrNiMo 17-12-2

X 2 CrNiMo 17-12-2

X 4 CrNiMo 16-5-1

X 2 CrNiMo 18-14-3

416

410

430

420

420 F

431

430 F

440 B

434

440 C

304

305 / 308

303

304 L

301

CA-6 NM

316

316 L

316 L

2380

2302

2320

2303

2304

2321

2383

2332

2346

2352

2331

2384

2347

2348

316 L

Z 11 CF 13

Z 10 C 13

Z 8 C 17

Z 20 C 13

Z 30 C 13

Z 44 C 14

Z 15 CN 16.02

Z 13 CF 17

Z 8 CF 17

Z 8 CDF 19.02

Z 100 CD 17

Z 6 CN 18.09

Z 5 CN 18.11 FF

Z 8 CNF 18.09

Z 2 CN 18.10

Z 3 ZN 19.09

Z 11 CN 18.08

Z 4 CND 13.4 M

Z 2 CN 23.04 AZ

Z 7 CND 17.12.02

Z 3 CND 18.12.02

Z 6 CND 16.05.01

Z 3 CND 18.14.03

416 S 21

410 S 21

430 S 17

420 S 37

420 S 45

431 S 29

434 S 17

304 S 15

305 S 17

303 S 31

304 S 11

301 S 22

425 C 11

316 S 31

316 S 11

316 S 11

Material DIN AISI1) SS2) AFNOR3) BS4)

1.4436

1.4460

1.4462

1.4539

1.4541

1.4542

1.4550

1.4567

1.4570

1.4571

1.4580

1.4713

1.4742

1.4762

1.4828

1.4841

1.4845

244 Cu

X 3 CrNiMo 17-13-3

X 3 CrNiMoN 27-5-2

X 2 CrNiMoN 22-5-3

X 1 NiCrMoCuN 25-20-5

X 6 CrNiTi 18-10

X 5 CrNiCuNb 16-4

X 6 CrNiNb 18-10

X 3 CrNiCu 18-9-4

X 6 CrNiCuS 18-9-2

X 6 CrNiMoTi 17-12-2

X 6 CrNiMoNb 17-12-2

X 10 CrAlSi 7

X 10 CrAlSi 18

X 10 CrAlSi 25

X 15 CrNiSi 20-12

X 15 CrNiSi 25-21

X 8 CrNi 25-21

316

329

SA 182 (F 51)

904 L

321

630

347

304 Cu

303 Cu

316 Ti

316 CB

(446)

309

314 / 310

2343

2324

2377

2562

2337

2338

2350

(2322)

Z 7 CND 18.12.03

Z 5 CND 27.05 AZ

Z 3 CND 22.05 AZ

Z 2 NCDU 25.20

Z 6 CNT 18.10

Z 7 CNU 15.05

Z 7 CNU 17.04

Z 6 CNNb 18.10

Z 6 CNU 18.10

Z 8 CNUF 18.09

Z 6 CNDT 17.12

Z 6 ZNDNB 17.12

Z 12 CAS 18

Z 12 CAS 25

Z 17 CNS 20.12

Z 15 CNS 25.20

Z 8 CN 25.20

316 S 31

(318 S 13)

321 S 31

347 S 31

394 S 17

320 S 31

318 S 17

309 S 24

314 S 25

5/20/2018 Inox_UK

11/12

So as to ensure that even the highest demands

are met such as those of the automotive

industry we have established a 'zero-fault

goal where priority is given to error avoidance

in production.

To maintain the sustainability of our philosophy,

we continuously optimize our process flows

and apply the following tools and methods:

project management and advance quality

planning

statistical process control (SPC)

process analysis and machine capability

studies

measurement systems analysis (MSA)

failure mode and effects analysis (FMEA)

product, process and system audits

benchmarking

8D reports

first article inspection (in compliance with

PPAP, VDA and IMDS)

Furthermore SCHMOLZ + BICKENBACH is

certified under EN ISO 9001:2000 by

Germanischer Lloyd Certification and ISO TS16949 by Swiss Certification. We also have

acquired the Q1 Preferred Quality Award

from Ford.

Quality from a

single source. From

computer-operated

steel production

to quality control

techniques such as

magnaflux testing or

notched bar impact

tests, SCHMOLZ +BICKENBACH

offers worldwide

customized steel

solutions for every

steel grade.

Quality management

20 21

We employ the following analytical methodology

and equipment:

carbon sulphur (C/S) analyzer

chemical analyses by means of emission

spectrometry both stationary and mobile

strength and toughness testing, applying

tensile and notched-bar impact tests at high

and low temperatures

Vickers, Brinell and Rockwell hardness

testing as well as microhardness testing

magnetic property measurement including

hysteresis

microstructure analysis, purity determination

and grain size measurements by means of

micro-sectional analysisdetermination of inner material flaws using

ultrasonic testing

determination of outer material flaws by

means of magnaflux and eddy current testing

roughness testing

Using SCHMOLZ + BICKENBACH materials

engineering, we can re-assure our clients of a

very reliable platform for customized and highly

qualitative steel and aluminium solutions.

Our technicians know-how guarantees that our

clients special requirements are fully understood,

enabling us to place the very best steel at their

disposal.

Our materials engineering department includes

the latest testing equipment empowering us to

carry out all the chemical, physical, mechanical

and technological tests necessary to determine

the characteristic properties of the following:

case-hardening, cold-heading and

free-cutting steelsgeneral structural and quenched and

tempered steels

stainless, acid and heat-resistant steels

tool and high-speed steels

Materials engineering

5/20/2018 Inox_UK

12/12

An effective organizational structure and t he

codifying of operational and work processesensure that the long-term business objectives

towards a responsible handling of resources

and environmental protection are pursued

without any exception whatsoever.

At SCHMOLZ + BICKENBACH the responsible

handling of resources and the protection ofthe environment are top priorities. In 2003 we

already began to establish a comprehensive

environmental management system (EMS) in

compliance with the ISO 14001 international

standard.

The ISO 14001:2004 certificati on held by

SCHMOLZ + BICKENBACH Distributions GmbH

is also adhered to at all other SCHMOLZ +

BICKENBACH locations, where regular internal

audit checks are made assuring the fulfilment

of the ISO requirements.

In accordance with the ISO 14001 environmental

standard, all company processes are analyzedand classified with respect to their environmental

compatibility. If necessary, measures are defined

to optimize the processes and then put into

practice on a continual basis.

SCHMOLZ + BICKENBACH Berlin

Egellsstrae 21D-13507 Berlin

Tel. +49 (0)30 4 17 84 3 Fax 450

SCHMOLZ + BICKENBACH Bielefeld

Lbberbrede 4

D-33719 Bielefeld

Tel. +49 (0)521 2 08 83 0 Fax 17

SCHMOLZ + BICKENBACH Frankfurt

Otto-Hahn-Strae 10

D-35510 Butzbach

Tel. +49 (0)6033 7450 0 Fax 32

SCHMOLZ + BICKENBACH ChemnitzGottfried-Schenker-Strae 11

D-09244 Lichtenau

Tel. +49 (0)37208 8 01 0 Fax 30

SCHMOLZ + BICKENBACH Dsseldorf

Eupener Strae 70

D-40549 Dsseldorf

Tel. +49 (0)211 5 09 2851 Fax 2864

SCHMOLZ + BICKENBACH Hamburg

Bredowstrae 19D-22113 Hamburg

Tel. +49 (0)40 75 60 51 0 Fax 40

SCHMOLZ + BICKENBACH Mnchen

Otto-Hahn-Strae 18 20

D-82216 Maisach

Tel. +49 (0)8141 53 461 0 Fax 81

SCHMOLZ + BICKENBACH Nrnberg

Schweinauer Hauptstrae 38

D-90441 Nrnberg

Tel. +49 (0)911 8 33 05 0 Fax 28

SCHMOLZ + BICKENBACH StuttgartSchaflandstrae 22

D-70736 Fellbach

Tel. +49 (0)711 57 65 0 Fax 106

SCHMOLZ + BICKENBACH Trossingen

Gottlieb-Daimler-Strae 2 4

D-78647 Trossingen

Tel. +49 (0)7425 22 03 0 Fax 33

SCHMOLZ +BICKENBACH Distributions GmbH locations in GermanyManagement of environmental resources

22 23

German

administration,central distribution

and bright steel

production in

Dsseldorf.