D 3320 E 06.2010
Inserting Tools for Screwdrivers
BitsSocketsFindersBit holders
With the longest lifetime and highest wearresistance combined with the best fits, ourinserting tools are designed for the industrialuse.
The large variety of this assortment combinesstandard inserts and inserts for special appli-
cations. If those cannot be used, we also offercustom made bits. Whatever fastener needsto be assembled, we have the right tool foryou. To achieve the utmost economical solutionin regard to wear, usage and price, DEPRAGwill support you with detailed advise andservice. Please donβt hesitate to ask us.
Screwdriving technology Automation Air motors Air tools
This brochure shows a small selection of in-serting tools available for our MICROMAT-/MINIMAT-screwdrivers.
You will find a much larger range of theseinserting tools on the Internet as follows:
www.deprag.com / Screwdriving Tech-nology / Selection program: Inserting Tools
This selection program is updated permanentlyand allows you to look for suitable insertingtools for your DEPRAG screwdriver yourself.
Simply pick the required parameters from theshown listing by mouse click and you will getthe respective part no. including an informationabout the lead time.
All you have to do now is to send an inquiryto [email protected] via e-mail and we willarrange to send you our related offer eitherdirectly or via our respective local represen-tative.
2
PRODUCT SPECTRUM INSERTING TOOLS
FIND A MUCH LARGER RANGE OF INSERTING TOOLS ON THE INTERNET
Inserting Tools Type of Screw find on
for MICROMAT-Screwdrivers
bits, finders slotted screws Page 3bits, finders, bit holders PHILLIPS and POZIDRIV screws Page 4bits, bit holders allen screws, torx screws and
threaded pins Page 4 / 5sockets with shaft hex. screws and hex. nuts Page 5semi-finished bits and finders, special bits β Page 5
for MINIMAT-, Recycling-, Slip clutch-, Pulse tools, Electric Screwdrivers
bits, finders, bit holders, special bits slotted screws Page 6 / 7bits, finders, bit holders PHILLIPS and POZIDRIV screws Page 8 / 9threaded bit tips, bit holder (threaded), semi-finished finders,special bits, adapters and chuck for stud screws Page 10 / 11threaded bit tips torx screws Page 10bits, bit holders allen screws, torx screws and
threaded pins Page 12 / 13
for SENSOMAT- and MINIMAT-T-Screwdrivers
sensor sleeves, bits slotted screws Page 14 / 15sensor sleeves, bits, bit holders PHILLIPS and POZIDRIV screws Page 14 / 15
for Ratchet wrench
sockets, holder hex. screws and hex. nuts Page 16
for MINIMAT-, Recycling-, Slip clutch-, Pulse tools, Electric Screwdriver, Impact Wrenches and EC-SERVO-Screwdriver
sockets hex. screws and hex. nuts Page 16 / 17 / 18extensions / ball joints internal-οΏ½, external-οΏ½ Page 18 / 19bits, holder internal hex. screws, threaded pins Page 19 / 20chuck for stud screws stud screws Page 19locking pins and rubber rings β Page 20
3
Bits, finders (without and with screw suction)
FOR MICROMAT-SCREWDRIVER
Bits, slotted finders, bit holder (non-magnetic)
Bits, finders, bit holder (magnetic)
External hex. driveA3 DIN 3126 (.118β)
order no.
3.84.24.34.54.75.55.6
.20
.22
.22
.22
.24
.28
.28
mm in. order no.
80 39 4580 39 4980 39 4980 39 4980 39 4680 39 4880 39 48
.020 x .122
.024 x .134
.024 x .134
.024 x .134
.024 x .134
.032 x .154
.032 x .154
in.
80 36 0680 39 3580 39 3580 39 3580 39 3580 36 0780 36 07
order no.
80 39 29
slotted screws finder bit bit holder (magnetic)
.150
.165
.170
.177
.185
.216
.220
in.
5.05.55.55.56.07.07.0
mm
0.5 x 30.6 x 3.50.6 x 3.50.6 x 3.50.6 x 3.50.8 x 40.8 x 4
mmbladehead dia.
35 (13/8β)12
(15/32β) (3/8β
ΓΈ9.5
57 (21/4β)
ΓΈ6.5
(1 /4β)
d
28 (13/32β)
3.84.24.34.54.75.55.6
.20
.22
.22
.24
.24
.28
.28
mm in. order no.
80 39 4034 17 8334 17 8480 39 4480 39 4480 39 4380 39 43
.020 x .122
.024 x .134
.020 x .122
.024 x .134
.024 x .134
.032 x .154
.032 x .154
in.
80 36 0680 39 3580 36 0680 39 3580 39 3580 36 0780 36 07
order no.
80 39 30
order no.
slotted screws bitfinder bit holder (non-magnetic)
.150
.165
.170
.177
.185
.216
.220
in.head dia.
5.05.55.56.06.07.07.0
mmd
0.5 x 30.6 x 3.50.5 x 30.6 x 3.50.6 x 3.50.8 x 40.8 x 4
mmblade
28 (13/32β)36.5 (17/16β)
12.5(1/2β) (3 /8
β)ΓΈ9
.5
57 (21/4β)
ΓΈ6.5
(1 /4β)
3.03.03.84.24.34.54.75.6
4.04.04.85.35.55.65.86.6
mm order no.
325612341697323862341739341740341698341702323864
.016 x .080
.016 x .098
.020 x .122
.024 x .134
.020 x .122
.024 x .134
.024 x .134
.032 x .154
in.
341689341690323854341691323854341691341691341692
order no.
slotted screws finder1) bit
.118
.118
.150
.165
.170
.177
.185
.220
in.head dia.
4.04.04.85.35.55.65.86.6
mm
.16
.16
.19
.21
.22
.22
.23
.26
in.d
0.4 x 2.00.4 x 2.50.5 x 3.00.6 x 3.50.5 x 3.00.6 x 3.50.6 x 3.50.8 x 4.0
mmblade
10 (3/8β)50 (131/32β)
1) hereto spring sleeve cpl., see leaflet of respective screwdriver Accessories (Optional Equipment)
External hex. driveA3 DIN 3126 (.118β)
External hex. driveA3 DIN 3126 (.118β)
External hex. driveC4 DIN 3126 (5/32β)
External hex. driveC4 DIN 3126 (5/32β)
Internal hex. driveD4 DIN 3126 (5/32β)
Internal hex. driveD4 DIN 3126 (5/32β)
4
Bits, finders (without and with screw suction)
Bits, bit holders (non-magnetic and magnetic)
Bits, bit holders (non-magnetic and magnetic)
FOR MICROMAT-SCREWDRIVER
AFmm
β0.91.522.53
order no.
β803955803956803957803958803959
T 6T 7T 8T 9T 10T 15
order no.
803600803604803601803603803602803608
803930 803929
order no. order no.
Torxallen bitallen screws, threaded pins
Torx-
bit holder (non-magnetic) or bit holder (magnetic)
Torx 57 (21/4β)
ΓΈ6.5
(1 /4β)
28 (13/32β) 28 (13/32β)
point sizePHILLIPSorder no.
POZIDRIVorder no. order no. order no.
012
803950803951803952
803924803925803612
PHILLIPS screws bit bit holder (non-magnetic) or bit holder (magnetic)
803930 803929
POZIDRIV screws57 (21/4β)
ΓΈ6.5
(1 /4β)
28 (13/32β)
32 39 0632 39 0632 39 0732 39 0732 39 0732 39 0732 39 0732 39 0732 39 0732 39 0732 39 07
80 36 1380 36 1332 39 0832 39 0832 39 0832 39 0832 39 0832 39 0832 39 0832 39 0832 39 08
32 39 0632 39 0632 57 4132 57 4132 39 0732 39 0732 39 0732 39 0732 39 0732 39 0732 39 07
35 35 7135 35 7133 02 0133 02 0132 39 0832 39 0832 39 0832 39 0832 39 0832 39 0832 39 08
.118
.125
.150
.157
.165
.170
.185
.196
.216
.220
.236
in.pointsize
00111111111
PHILLIPSorder no.
POZIDRIVorder no. mm
3.84.24.85.25.25.25.76.66.66.67.0
PHILLIPSorder no.
POZIDRIVorder no.order no.
32 38 6132 97 1932 38 6232 62 3032 45 7132 45 7132 43 4132 62 3132 38 6432 38 6432 46 59
with screw suctionfinder1) bitPHILLIPS screws
POZIDRIV screws
3.03.23.84.04.24.34.75.05.55.66.0
mm
without screw suctionbit
in.
.15
.16
.19
.20
.20
.20
.22
.26
.26
.26
.27
head dia. d
50 (131/32β) 50 (131/32β)10 (3/8β)
1) hereto spring sleeve cpl., see leaflet of respective screwdriver Accessories (Optional Equipment)
External hex. driveA3 DIN 3126 (.118β)
External hex. driveA3 DIN 3126 (.118β)
External hex. driveA3 DIN 3126 (.118β)
External hex. driveA3 DIN 3126 (.118β)
External hex. driveC4 DIN 3126 (5/32β)
External hex. driveC4 DIN 3126 (5/32β)
External hex. driveC4 DIN 3126 (5/32β)
Internal hex. driveD4 DIN 3126 (5/32β)
Internal hex. driveD4 DIN 3126 (5/32β)
5
Bits
Sockets with shaft (without and with screw suction)
Semi-finished bits and finders (not hardened) special bits
FOR MICROMAT-SCREWDRIVER
Torx screws
Torx size
T 6T 7T 8T 10
order no.
803926803586803587803589
hex. screws
hex. nuts
AFmm
4.0β5.05.5β
mm in.
8β9
10β
order no.
803960β
803961803962
β
order no.
330633330633330634330634330634
mm in.
7788
9.5
order no.
324587330239324588324589330241
without screw suction with screw suction
socket with shaftspring sleevesocket with shaft
mmd1
in.
5.05.56.66.6
.06
.06
.06β
15/1615/1631/3231/16
order no.490013490014490015490069
mm mm order no.3.63.64.04.0
102130100152
490230490229490228490212
mm mm order no.0.20x1.00.25x1.50.25x2.00.40x4.00.50x4.00.70x4.0
505050909090
324098324099324100339923339924339925
pointsize mm
PHILLIPSorder no.
POZIDRIVorder no.
11101
75 90102152152
328176339921327520348426348430
333917339922337990
β348431
finder
AFin.
5/323/16β7/321/4
mm in.
43β4343β
111/16β
111/16111/16
β
d L
5/16β
23/6425/64β
9/329/325/165/163/8
mm in.
4043404445
19/16111/1619/16123/32125/32
d L
in..14.14.16.16
in.4
51/8315/16
6
d Lin.
.008x.040
.010x.060
.010x.080
.016x.154
.020x.154
.028x.154
in.blade L
131/32131/32131/3239/1639/1639/16
215/1639/16
466
in.in.49/6449/6413/1613/16
mm
19,519,520,520,5
mm
24242578
in.
113/64113/6411/4
321/64
mm
30,530,531,584,5
d2
.12
.15
.19
.19
mm
3.03.94.84.8
mm
1.51.51.5β
in.
.20
.22
.26
.26
L l tDin. in.
bit50 (131/32β)
L
External hex. driveA3 DIN 3126 (.118β)
External hex. driveA3 DIN 3126 (.118β)
External hex. driveA3 DIN 3126 (.118β)
External hex. driveA3 DIN 3126 (.118β)
External hex. driveA3 DIN 3126 (.118β)
External hex. driveA3 DIN 3126 (.118β)
Special bits, finders
Bits, finders
6
FOR MINIMAT-, RECYCLING-, SLIP CLUTCH SCREWDRIVERS
FOR MINIMAT-, SLIP CLUTCH SCREWDRIVERS
mm
3.844.24.34.54.755.666.56.9777.58.28.38.599.29.5
101011
mm
5.55.55.566777
7.58.58.58.58.59.59.510.512
10.51212121213
finder1)
order no.
322575322575322575342338342338342337342346322573342340342344342339342339342339342342342341342345322630342345322630322630322630322630342343
in.
.020 x .122
.020 x .122
.020 x .122
.024 x .134
.024 x .134
.024 x .134
.024 x .177
.032 x .154
.032 x .215
.032 x .154
.038 x .215
.032 x .215
.038 x .215
.038 x .215
.046 x .255
.038 x .215
.046 x .255
.038 x .215
.046 x .312
.046 x .312
.046 x .312
.063 x .312
.063 x .312
bitorder no.
804001804001804001803598803598803598803590803592804012803592803593804012803593803593803872803593804007803593804007804007804007803594803594
mm
6β666
6.5β7
7.5β8.5β8.59
9.5β10β1111121213
finder1)
order no.
325246β
325247325247325248325249
β325133325751
β325250
β325250342258342249
β342248
β325255325256325170325170342260
short executionwithout screw suction
long executionwithout screw suction
mm
0.5 x 3β
0.5 x 30.5 x 30.5 x 30.5 x 3
β0.8 x 40.8 x 4
β1 x 5.5
β1 x 5.51 x 5.5
1.2 x 6.5β
1.2 x 6.5β
1,2 x 81.2 x 81.2 x 81.6 x 81.6 x 8
bitorder no.
804021β804021804021804021804021β803595803595β803596β803596803596803873β803873β804027804027804027803597803597
with screw suction (onlyMINIMAT straight screwdr.size 1 and size 2)
slotted screws
in.
.150
.157
.165
.170
.177
.185
.196
.220
.236
.255
.271
.275
.275
.295
.323
.326
.334
.354
.362
.374
.395
.395
.433
in.
.22
.22
.22
.24
.24
.28
.28
.28
.30
.33
.33
.33
.33
.37
.37
.41
.47
.41
.47
.47
.47
.47
.51
mm
0.5 x 30.5 x 30.5 x 3
0.6 x 3.50.6 x 3.50.6 x 3.50.6 x 4.50.8 x 4
0.8 x 5.50.8 x 41 x 5.5
0.8 x 5.51 x 5.51 x 5.5
1.2 x 6.51 x 5.51.2 x 81 x 5,51.2 x 81.2 x 81.2 x 81.6 x 81.6 x 8
in.
.24β.24.24.24.26β.28.30β.33β.33.35.37β.39β.43.43.47.47.51
in.
.020 x .122β
.020 x .122
.020 x .122
.020 x .122
.020 x .122β
.032 x .154
.032 x .154β
.038 x .215β
.038 x .215
.038 x .215
.046 x .255β
.046 x .255β
.046 x .312
.046 x .312
.046 x .312
.063 x .312
.063 x .312
4 (5/32β)50 (115/16β) 25 (1β)
head dia. d blade d blade
70 (23/4β)
External hex. driveE6.3 DIN 3126 (1/4β)
External hex. driveE6.3 DIN 3126 (1/4β)
in.
.150
.157
.165
.170
.177
.185
.196
.220
.236
.255
.271
.275
.275
.295
.323
.326
.334
.354
.362
.374
.395
.395
.433
101011
mm
ββ666
6.5β7
7.5β8.5β8.59
9,5β10β11
11,5121213
finder1)
order no.
ββ
353891353891353892353894
β353897333680
β332770
β332770346365333681
β351811
β331735351813326388326388326389
in.
ββ
.028 x .134
.028 x .134
.028 x .134
.028 x .134β
.032 x .154
.032 x .187β
.036 x .215β
.036 x .215
.038 x .250
.038 x .275β
.038 x .275β
.046 x .312
.046 x .312
.046 x .312
.046 x .312
.046 x .312
bitorder no.
ββ
804013804013804013804013
β804014804018
β804015
β804015804019804016
β804016
β804017804017804017804017804017
slotted screws
mm
3.844.24.34.54.755.666.56.9777.58.28.38.599.29.5
in.
ββ.24.24.24.26β.28.30β.33β.33.35.37β.39β.43.45.47.47.51
dhead dia.mm
ββ
0.7 x 3.50.7 x 3.50.7 x 3.50.7 x 3.5
β0.8 x 4
0.8 x 4.7β
0.9 x 5.5β
0.9 x 5.51 x 6.31 x 7
β1 x 7
β1.2 x 81.2 x 81.2 x 81.2 x 81.2 x 8
102 (4β)
blade
57 (21/4β)
1) hereto spring sleeve cpl., see leaflet of respective screwdriver Accessories (Optional Equipment)
External hex. driveE6.3 DIN 3126 (1/4β)
7
FOR MINIMAT-, RECYCLING-, SLIP CLUTCH-, PULSE TOOLS-, ELECTRIC SCREWDRIVERS
without screw suction / with screw suction (only MINIMAT straight screwdriver size 1 and size 2)
Bits, finders, bit holders (non-magnetic and magnetic)
mm
66
6.56.577
7.588
8.599910
10.510.510.511
11.511.512.512.513.5
finderorder no.
354698354698354699354699354700354700341388354701334920354702354468354468354703354704354705354706354707354708354709354710354711354711354712
mm
0.5 x 30.5 x 3
0.6 x 3.50.6 x 3.50.6 x 3.50.6 x 3.50.6 x 4.50.8 x 5
0.8 x 5.50.8 x 5.50.8 x 5.50.8 x 5.51.2 x 6.51 x 5.5
1.2 x 6.51 x 5.51.2 x 81 x 5.5
1.2 x 6.51.2 x 81.2 x 81.6 x 81.6 x 8
bitorder no.
820883820883821071/3821071/3821071/3821071/3803841803842803969803969803969803969821072/3821075821072/3821075803846821075821072/3803846803846821076821076
bit holder (non-magnetic)order no.
bit holder (magnetic)order no.
804602 821068
in.
.020 x .122
.020 x .122
.024 x .134
.024 x .134
.024 x .134
.024 x .134
.024 x .177
.032 x .196
.032 x .215
.032 x .215
.032 x .215
.032 x .215
.046 x .255
.038 x .215
.046 x .255
.038 x .215
.046 x .312
.038 x .215
.046 x .255
.046 x .312
.046 x .312
.063 x .312
.063 x .312
in.
.24
.24
.26
.26
.28
.28
.30
.31
.31
.33
.35
.35
.35
.39
.41
.41
.41
.43
.45
.45
.49
.49
.53
d blade
75 (3β)
ΓΈ10,
5(13
/32β)57 (21/4β)
ΓΈ11
(7 /16β
)25 (1β)
External hex. driveE6.3 DIN 3126 (1/4β)
External hex. driveE6.3 DIN 3126 (1/4β)
External hex. driveC6.3 DIN 3126 (1/4β) Internal hex. drive
D6.3 DIN 3126 (1/4β)Internal hex. driveD6.3 DIN 3126 (1/4β)
mm
βββββββ7
7.5β8.5β8.59
9.5β10β11
11.5121213
finder1)
order no.
βββββββ
353904330731
β353905
β353905330178353906
β326669
β353907353909325518325518353910
mm
βββββββ
0.8 x 40.8 x 4.7
β0.9 x 5.5
β0.9 x 5.51 x 6.31 x 7
β1 x 7
β1.2 x 81.2 x 81.2 x 81.2 x 81.2 x 8
bitorder no.
βββββββ
804034804039
β804035
β804035804033804036
β804036
β804037/1804037/1804037/1804037/1804037/1
finder1)
order no.
βββββββ
343915328972
β353911
β353911353912353913
β332775
β353914353915337006337006353916
mm
βββββββ
0.8 x 40.8 x 4.7
β0.9 x 5.5
β0.9 x 5.51 x 6.31 x 7
β1 x 7
β1.2 x 81.2 x 81.2 x 81.2 x 81.2 x 8
bitorder no.
βββββββ
803979803980
β803981
β803981803982803983
β803983
β803984803984803984803984803984
mm
βββββββ7
7.5β8.5β8.59
9.5β10β11
11.5121213
in.
βββββββ
.032 x .154
.032 x .187β
.036 x .215β
.036 x .215
.038 x .250
.038 x .275β
.038 x .275β
.046 x .312
.046 x .312
.046 x .312
.046 x .312
.046 x .312
in.
βββββββ.28.30β.33β.33.35.37β.39β.43.45.47.47.51
in.
βββββββ.28.30β.33β.33.35.37β.39β.43.45.47.47.51
in.
βββββββ
.032 x .154
.032 x .187β
.036 x .215β
.036 x .215
.038 x .250
.038 x .275β
.038 x .275β
.046 x .312
.046 x .312
.046 x .312
.046 x .312
.046 x .312
82 (31/4β) 127 (5β) 107 (47/32β) 152 (6β)
d blade d blade
1) hereto spring sleeve cpl., see leaflet of respective screwdriver Accessories (Optional Equipment)
External hex. driveE6.3 DIN 3126 (1/4β)
External hex. driveE6.3 DIN 3126 (1/4β)
8
FOR MINIMAT-, RECYCLING-, SLIP CLUTCH-, PULSE TOOLS-, ELECTRIC SCREWDRIVERS
long excecutionwithout screw suction
Bitsshort executionwithout screw suction
FOR MINIMAT-, RECYCLING-, SLIP CLUTCH-, ELECTRIC SCREWDRIVERS
3.83.844.34.755.666.56.977.58.28.399.29.5
PHILLIPSorder no.
804040804041804041804041804041804041804041804041804042804042804042804042804042804042804042804042804042804042804043804043804043804044804044
01111111222222222233344
POZIDRIVorder no.
β803985803985803985803985803985803985803985803986803986803986803986803986803986803986803986803986803986803987803987803987803991803991
PHILLIPSorder no.
804045804046804046804046804046804046804046804046804047804047804047804047804047804047804047804047804047804047804048804048804048 β β
POZIDRIVorder no.
β803988803988803988803988803988803988803988803989803989803989803989803989803989803989803989803989803989803990803990803990 β β
PHILLIPS screws
POZIDRIV screws
mmpoint size in.
10111212.514.516
.150
.150
.157
.170
.185
.196
.220
.236
.255
.271
.275
.295
.323
.326
.354
.362
.374
.395
.433
.472
.492
.573
.630
head dia.
70 (23/4β)50 (115/16β)
External hex. driveE6.3 DIN 3126 (1/4β)
External hex. driveE6.3 DIN 3126 (1/4β)
mm
3.844.34.755.666.56.977.58.28.399.29.5
PHILLIPSorder no.
324963324963324963324963324963324963324963324331324331324331324331324331324331324331324331324331324331
point size
11111112222222222
POZIDRIVorder no.
324686324686324686324686324686324686324686324842324842324842324842324842324842324842324842324842324842
finder1)
order no.
353917353931353933353934353935334181333680
β338337
β346365344104
ββ
331735351813326388
withoutscrew suction
mm
77777
7.57.5β8.5β910ββ11
11.512
POZIDRIVorder no.
353922353922353922353922353922324686324686
β324842
β324842324842
ββ
324842324842324842
PHILLIPSorder no.
353921353921353921353921353921324963324963
β324331
β324331324331
ββ
324331324331324331
with screw suction (onlyMINIMAT straight screwdriver size 1 and size 2)
10
in.
.150
.157
.170
.185
.196
.220
.236
.255
.271
.275
.295
.323
.326
.354
.362
.374
.395
head dia.in.
.28
.28
.28
.28
.28
.30
.30β.33β.35.39ββ.43.45.47
103 (4β) 103 (4β)57 (21/4β)
PHILLIPS screws
POZIDRIV screws
d
1) hereto spring sleeve cpl., see leaflet of respective screwdriver Accessories (Optional Equipment)
External hex. driveE6.3 DIN 3126 (1/4β)
External hex. driveE6.3 DIN 3126 (1/4β)
9
FOR MINIMAT-SCREWDRIVERSFOR MINIMAT-, RECYCLING-, SLIP CLUTCH-,PULSE TOOLS-, ELECTRIC SCREWDRIVERS
long execution, with screw suction (onlyMINIMAT straight screwdriver size 1 and size 2)
Bits, finders Bits, bit holders (non-magnetic and magnetic)
mm
6656
6.56.57
7.5β8.5β9
9.5ββ11111213ββββ
finder1)
order no.
325246325246330742325247325249329280325220325181β325251β325260325253ββ325255325256325170342260ββββ
PHILLIPSorder no.
804045338894338894338894338894804046804046804046
β804047
β804047804047
ββ
804047804047804047804048
ββββ
POZIDRIVorder no.
β339140339140339140339140803988803988803988
β803989
β803989803989
ββ
803989803989803989803990
ββββ
PHILLIPSorder no.
POZIDRIVorder no.
804635804636804636804636804636804636804636804636804637804637804637804637804637804637804637804637804637804637804638804638804638804640804640
804641/3804665804665804665804665804665804665804665804666804666804666804666804666804666804666804666804666804666804667804667804667804674804674
in.
.24
.24
.20
.24
.26
.26
.28
.30β.33β.35.37ββ.43.43.47.51ββββ
25 (1β)
ΓΈ14
(9/16
β)
L
ΓΈ11
(7/16
β)
L25 (1β) 70 (23/4β)
dnon-
magneticorder no.
magneticorder no.
821068337722330744335481334086330745
magnetic andquick change
chuckorder no.
75100150204250300
in.
804602804639/1804614/1812944/1
57102152203
821692820150358131
21/32
3531/32
mm
51.576.5
151.5
L
3315/16
529/32
81/32
927/32
1113/16
21/4
468
in.mmL
in.mmL
External hex. driveE6.3 DIN 3126 (1/4β)
External hex. driveE6.3 DIN 3126 (1/4β)
External hex. driveE6.3 DIN 3126(1/4β)
External hex. driveC6.3 DIN 3126 (1/4β) Internal hex. drive
D6.3 DIN 3126 (1/4β)Internal hex. driveD6.3 DIN 3126(1/4β)
POZIDRIVorder no.
330255330255330255330255330255330255330255331003331003331003331003331003331003331003331003331003331003
PHILLIPSorder no.
325567325567325567325567325567325567325567331002331002331002331002331002331002331002331002331002331002
finder1)
order no.
353945353946353947353948353949337383330731
β333555
β330178353950
ββ
353952353953339264
mm
77777
7.57.5β9.5β9
9.5ββ11
11.511.5
in.
.28
.28
.28
.28
.28
.30
.30β.37β.35.37ββ.43.45.45
POZIDRIVorder no.
PHILLIPSorder no.
353944353944353944353944353944325567325567
β331002
β331002331002
ββ
331002331002331002
339867339867339867339867339867330255330255
β331003
β331003331003
ββ
331003331003331003
POZIDRIVorder no.
327386327386327386327386327386327386327386330026330026330026330026330026330026330026330026330026330026
PHILLIPSorder no.
327986327986327986327986327986327986327986328551328551328551328551328551328551328551328551328551328551
finder1)
order no.
353955353958353959353960353961337182328972
β332621
β353912353962
ββ
353963353964326088
mm
77777
7.57.5β9β9
9.5ββ11
11.512
in.
.28
.28
.28
.28
.28
.30
.30β.35β.35.37ββ.43.45.47
POZIDRIVorder no.
PHILLIPSorder no.
346327346327346327346327346327327986327986
β328551
β328551328551
ββ
328551328551328551
withoutscrew suction
with screw suction (onlyMINIMAT straight screwdr. size 1 and size 2)
withoutscrew suction
with screw suction (onlyMINIMAT straight screwdriver size 1 and size 2)
127 (5β) 82 (31/4β) 127 (5β) 152 (6β) 107 (41/4β) 152 (6β)
dd
1) hereto spring sleeve cpl., see leaflet of respective screwdriver Accessories (Optional Equipment)
External hex. driveE6.3 DIN 3126 (1/4β)
External hex. driveE6.3 DIN 3126 (1/4β)
External hex. driveE6.3 DIN 3126 (1/4β)
External hex. driveE6.3 DIN 3126 (1/4β)
340727340727340727340727340727327386327386
β330026
β330026330026
ββ
330026330026330026
10
Semi-finished finders(not hardened)(not forElectricScrewdrivers)
FOR MINIMAT-, RECYCLING-, SLIP CLUTCH-, ELECTRIC SCREWDRIVERS
Threaded bit tips Bit holder (threaded)
pointsize
1111222
mm
5.566.3555.55.566.356
g
8-3210-32M 4M 48-3210-32M 5
mm
22342525223434
PHILLIPSorder no.
803744/1803747/1803728/1ββ803745/1803746/1803855
POZIDRIVorder no.
803707/1803748/1ββ803750/3803729/1803749/1803856
mm
5.65.65.65.65.65.66.356.356.356.356.356.355.55.55.55.55.55.5777777777788888
8-328-328-328-328-328-32
10-3210-3210-3210-3210-3210-32M 4M 4M 4M 4M 4M 4M 5M 5M 5M 5M 5M 5M 5M 5M 5M 5M 6M 6M 6M 6M 6
in.
35/32
41/8
51/8
65/32
65/8
7211/16
321/32
421/32
543/64
65/32
617/32
31/32
41/64
561/32
61/2
657/64
211/16
31/32
35/8
41/64
439/64
555/8
63/32
61/2
611/16
31/32
41/64
563/32
79/32
order no.
337500337499334316353697334420353694337497336707334315341042334421355758337520337521335637354233341765347107348745344689349569344819345466343309357736346886348235348417362258370770371868351713351533
mm
234464
101126
in.
29/32
123/32
11/2
321/32
321/32
order no
490199490031490105490107490108
in.
7/321/4
13/647/327/321/4
15/64
mm in.
7/8
111/32
11
7/8
111/32
111/32
in.
7/327/327/327/327/327/321/41/41/41/41/41/47/327/327/327/327/327/329/329/329/329/329/329/329/329/329/329/325/165/165/165/165/16
dmm
801051301561681786893
11814415616677
102127153165175687792
10211712714315516517077
102127155185
ld l
15375794
119
19/32
115/32
21/4
311/16
411/16
mm in. mm in.
507089
102/127152
115/16
23/4
31/2
4 / 56
L l bit length
ΓΈ13
(.511
β)
*) special lengths upon request
T 8T 10T 10T 10T 15T 15T 15T 20T 20T 20T 20T 25T 25T 25T 25T 30T 30T 30T 40
5.565.5665.5665.56765.5676777
M 410-32M 4M 510-32M 4M 510-32M 4M 5M 510-32M 4M 5M 610-32M 5M 6M 5
25342534342534342534253425342534252525
torxorder no.
820235/3822235/3803753823894/3812945/3803754820603/3820297/3803756/3812894/3821042/3820298/3825008/3822106/3821760/3820299/3803706/3821061/3821932/3
l
d g
torxsize mm
gin. mm in.
d l
7/3215/647/3215/6415/647/3215/6415/647/3215/649/3215/647/3215/649/3215/649/329/329/32
1111/32
1111/32
111/32
1111/32
111/32
1111/32
1111/32
1111/32
1111/32
111
External hex. driveE6.3 DIN 3126 (1/4β)
Threaded bit tips
11
Special bits(not hardened)
Adapters Chuck for stud screws
77777778
in.
.275
.275
.275
.275
.275
.275
.275
.315
order no.
490221490222490223490224490225490279490281490319
mmsquaredrive mm
5076
1001522032543053554065076
10015225450
152
order no.
804050803647/1804051803808/1803809/1803810/1803811/1803798/1820766/1804052/1820145/1803807820392/1803805/1804053820035/1
in.
50505050555555
order no.
390287390285390335390288390295390339390338
mm
9999
161616
M 3M 4M 5M 6M 8M 10M 12
stud screws
1/4"1/4"
3/8"
1/2"1/2"
70102127152200260300300
mm in.
23/4456
77/8101/4
1113/161113/16
1/4"1/4"1/4"1/4"1/4"1/4"1/4"
3/8"3/8"3/8"3/8"
in.
23
315/16681012141623
315/1661026
Ld Lin.mm
D L
11/3211/3211/3211/325/85/85/8
2222
23/1623/1623/16
Externalsquare drive
External hex. driveE6.3 DIN 3126 (1/4β)
Externalhex. drive External hex. drive
E6.3 DIN 3126 (1/4β)
12
FOR MINIMAT-, RECYCLING-, SLIP CLUTCH-, PULSE TOOLS-, ELECTRIC SCREWDRIVERS
Bits
L = 152 (6β)order no.
AFmm
Torx-
1.52β2.5β3ββ4β5β6β8
T 6T 7T 8T 9T 10T 15T 20T 25T 27T 30T 40ββββ
L = 50 (115/16β)order no.
β324814/3803670/1804114803671804115803672803673804116803675804117803676804118803677803678
β327153333277325565β803975ββ803976β803977β803978β812928/3
allen bit Torx bit
AFin.
β5/643/32
β7/64
β1/89/645/323/16
β7/32
β1/45/16
Torx screwsallen screws,threaded pins
L = 70 (23/4β)order no.
L = 50 (115/16β)order no.
821092803535/1803536803537/1803869/1803538/1803539/1803540/1803541/1803542/1803543/1ββββ
821516803548/1803866/3803549/1803550812914812915812916812917812918803556ββββ
L = 70 (23/4β)order no.
821055/1803560/1803561803562/1803563/1803564/1803565/1803566/1822995/1803568/1803569/1ββββ
L = 89 (31/2β)order no.
823038823520/1803575803576/1803868803577/1803578/1803579/1803580/1803581/1803582/1ββββ
External hex. driveE6.3 DIN 3126 (1/4β)
External hex. driveE6.3 DIN 3126 (1/4β)
13
Bits, bit holders (non-magnetic and magnetic)
allen bitorder no.
Torx bitorder no.
820302804668803682804669β804670803684β804671803687804672803688804673803689803690
803520803521803522803523803524803525803526803527803528803529803530ββββ
non-magneticorder no.
804602804639/1804614/1812944/1
magneticorder no.
821068337722330744335481334086330745
magnetic andquick change chuck
order no.
821692820150358131
mm
75100150204250300
3315/1657/881/1697/8
1113/16
Lin.
Internal hex. driveD6.3 DIN 3126 (1/4β)
L
ΓΈ11
(7 /16β
)25 (1β)25 (1β)
ΓΈ10,
5 (13
/32β) L
ΓΈ14
(9 /16β
)
mm
57102152203
21/4468
Lin. mm
51.576.5
151.5
21/323
531/32
Lin.
External hex. driveE6.3 DIN 3126 (1/4β)
External hex. driveE6.3 DIN 3126 (1/4β)
External hex. driveE6.3 DIN 3126 (1/4β)
External hex. driveC6.3 DIN 3126 (1/4β)
External hex. driveC6.3 DIN 3126 (1/4β)
Internal hex. driveD6.3 DIN 3126 (1/4β)
Internal hex. driveD6.3 DIN 3126 (1/4β)
Sensor sleeves, bits
14
FOR SENSOMAT-, MINIMAT-T-SCREWDRIVERS
counter nut for above with finders (and spring sleeve),without and with screw suction*)
mmsensor sleeves
order no.
1717171717171717171717202020121212
346070346071346072346088346089346090346091346092346093346094346095346096346084346097346098346099346100
PHILLIPSorder no.
338894338894338894804046804046804046804046804047804047804047804047804047804047804047804047804047804047
POZIDRIVorder no.
339140339140339140803988803988803988803988803989803989803989803989803989803989803989803989803989803989
bit
slotted screws(only self tapping screws)
mm
6666.577.588.5999
101010111111,5
3.844.34.755.666.56.977.588.28.399.29.5
*) Screw suction for drilling and self tapping screws not recommendable
PHILLIPS screws(only drilling and self tapping screws)
POZIDRIV screws(only drilling and self tapping screws)
order no.
counter nut339983 (f. SENSOMAT)339983/1 (f. MINIMAT-T)
spring sleeve 401613 A(screwdriver size 1)
spring sleeve 401613 B(screwdriver size 2)
(only for screw suction)
mm
3.844.34.54.755.666.56.9777.588.28.38.59
in.
.150
.157
.170
.177
.185
.196
.220
.236
.255
.271
.275
.275
.295
.315
.323
.326
.334
.354
head dia.
11111112222222222
.150
.157
.170
.185
.196
.220
.236
.255
.271
.275
.295
.315
.323
.326
.354
.362
.374
pointsize mm in. in.
d
.24
.24
.24
.26
.28
.30
.31
.33
.35
.35
.35
.39
.39
.39
.43
.43
.45
in.l
11/1611/1611/1611/1611/1611/1611/1611/1611/1611/1611/1613/1613/1613/1615/3215/3215/32
head dia.
70 (23/4β)
finder339982 (f. SENSOMAT)368013 (f. MINIMAT-T)
External hex. driveE6.3 DIN 3126 (1/4β)
Sensor sleeves, bits
Sensor sleeves, bits, bit holder (magnetic)
15
counter nut for above with finders, without screw suction
counter nut for above with finders, without screw suction
mm mmsensor sleeves
order no. mmbit
order no.counter nutorder no.
finderorder no.
171717171717171717171717172020202012
346070346071346072346073346074346075346076346077346078346079346080346081346082346083346084346085346086346087
0.5 x 30.5 x 30.5 x 30.5 x 30.5 x 30.5 x 30.8 x 40.8 x 40.8 x 41.0 x 5.50.8 x 4.01.0 x 5.51.0 x 5.51.0 x 5.51.2 x 6.51.0 x 5.51.2 x 6.51.0 x 5.5
804021804021804021804021804021804021803595803595803595803596803595803596803596803596803873803596803873803596
339983(f. SENSOMAT)
339983/1(f. MINIMAT-T)
mm mmsensor sleeves
order no.
7777788
101010
77777888888888888
344123344123344123344123344123344124344124343983343983343983344125344125344125344125344126344126344126
counter nutorder no.
finderorder no.
11.511.511.511.512.512.512.5
PHILLIPSorder no.
804636804636804636804636804636804636804636804637804637804637804637804637804637804637804637804637804637
POZIDRIVorder no.
804665804665804665804665804665804665804665804666804666804666804666804666804666804666804666804666804666
bit holder (magnetic)order no.
821068
bit
in.
.28
.28
.28
.28
.28
.31
.31
.39
.39
.39
.45
.45
.45
.45
.49
.49
.49
.28
.28
.28
.28
.28
.31
.31
.31
.31
.31
.31
.31
.31
.31
.31
.31
.31
in.
6666.56.577.588.59999
1010101011
in.
.020 x .122
.020 x .122
.020 x .122
.020 x .122
.020 x .122
.020 x .122
.032 x .154
.032 x .154
.032 x .154
.038 x .215
.032 x .154
.038 x .215
.038 x .215
.038 x .215
.046 x .255
.038 x .215
.046 x .255
.038 x .215
blade
11/1611/1611/1611/1611/1611/1611/1611/1611/1611/1611/16
13/1613/1613/16
15/32
13/16
11/1611/16
.24
.24
.24
.26
.26
.28
.30
.31
.33
.35
.35
.35
.35
.39
.39
.39
.39
.43
in. in.
75 (3β)
70 (23/4β)
d l
d l
ΓΈ10,
5 (13
/32β)
25 (1β)
339982(f. SENSOMAT)
368013(f. MINIMAT-T)
343982(f. SENSOMAT)
343982(f. MINIMAT-T)
343981(f. SENSOMAT)
369430(f. MINIMAT-T)
External hex. drive
External hex. driveE6.3 DIN 3126 (1/4β)
External hex. driveC6.3 DIN 3126 (1/4β) Internal hex. drive
D6.3 DIN 3126 (1/4β)
16
In-between sizes with hexagon and sockets with square on request
Sockets with hexagonhex. screwshex. nuts
Socketopening
Γorder no.
βββ
804171804173804174804175804176804177804178821993804179
ββββββ
804183
O
βββ5.58.59.59.5
1111111212ββββββ12
FOR RATCHET WRENCH
FOR MINIMAT-, RECYCLING-, SLIP CLUTCH-, PULSE TOOLS, ELECTRIC SCREWDRIVER
AFin.
ββ7/32ββ
5/16ββββββββββββ5/8ββββ3/4ββββ
11/16ββββ
order no.
ββ
804136804137804138
ββββββββββββββ
order no.
ββ
804185804186804187804188
βββββββββββββ
order no.
ββββ
804139804140804141804142804143804144821541804145821542804146
βββ
804147804148
order no.
βββββββ
804154804155
ββ
804157β
804158804159402717804161804165
β
39-331-19 K 39-331-21 K 39-331-32 K39-331-32 L
39-331-46 KClosed Head
39-331-43 OOpen Head
order no.
401467/8401467/7401467/5401467/4401467/2
ββββββββββββββ
39-521-19 K
AFmm
55.57810111213141516171819222427
1/2"5/8"
ββββββ
7/32ββββββββββββββββββββββββββββββ
55.5678910111213
AFmm
AFin.
10101012131416
15.516.519
25/6425/6425/6415/321/29/165/8
39/6421/323/4
mm
hex. screwshex. nuts
Din.
804126804120804125804121804122804113804123804127803791804124
non-magneticorder no.
804135804130804128804131804132804152804133804129804111804134
magneticorder no.
with screw suction(only MINIMAT straight screwdr. size 1 and size 2)
50 (2")50 (2")
External hex. driveE6.3 DIN 3126 (1/4β)
External hex. driveE6.3 DIN 3126 (1/4β)
β7/32
ββ
5/16
βββββ
Dmm in.
8.59.59.510
11.51313βββ
11/323/83/8
25/6429/321/21/2
βββ
325363325153325421324914325052335024325053
βββ
order no.
Sockets with shaft 1/4β hex. drive
hex. screwshex. nuts
Sockets, Holder
AFinββββ5/8ββββ3/4ββββββ
11/16
mm25253030303030
32.535
38.5
in.19/1619/1611/219/1611/219/1611/219/16149/64131/32
order no.804392804393820293804394820294804395
ββββ
order no.β
804393820293804394820294804395820526804396804397804398
Holder (for socket AF 14)order no.
804245
Socket
External square driveE 12.5 DIN 3121 (1/2β)
External hex. driveAF 14
30
Internal square driveG 12.5 DIN 3121 (1/2β)
AFmm10131617181921222427
in11
13/1613/1613/1613/1613/1619/3213/8
133/64
mm40403840384038404550
D L
39-331-46 KClosed Head
39-331-32 K39-331-32 L
mm in.
55.5678910101112131617181921222427
AFin.
Dnon-
magneticorder no.
L
25232323232323
25.4232323ββββββββ
804056804057804058804059804060804061804062
ββ804063804064804065
ββββββββ
magneticorder no.
804086804087804088804089804090804091
ββ804092/1804093
804094/1804095
ββββββββ
D
βββ19191919β191922
24.525.526.528ββββ
non-magneticorder no.
L
βββ
804370804371820853804372
β820855820295804373820292804374820311804375
ββββ
magneticorder no.
βββ
820851820852820854803768
β820856820857820858820859812942820860820711
ββββ
D
ββββ252525β252525253030303233
35.540
non-magneticorder no.
L
ββββ404040β4040404040404040404550
ββββ
804391820862804392
β803766820175804393820293804394820294804395820526804396804397804398
magneticorder no.
ββββ
820861820863820864
β820865820866820244820867812923820541812925820868820869820870820871
Internal square drive G12.5 DIN 3121 (1/2β)
AFmm
β7/32
ββ
5/16
βββββββ5/8
ββ3/4
βββ
11/16
mm in. mm in. mm in. mm in. mm in. mm in.
1/21/21/21/21/2
17/3219/325/85/8
11/163/4
ββββββββ
129/3229/3229/3229/3229/3229/32
129/3229/3229/3229/32
βββββββββ
βββ3/43/43/43/4
β3/43/47/8
31/32
113/64
13/32
ββββ
βββ
111/32
111/32
111/32
111/32
β111/32
111/32
111/32
111/32
111/32
111/32
111/32
ββββ
ββββ111β1111
13/16
13/16
13/16
11/4
15/16
113/32
19/16
ββββ
19/16
19/16
19/16
β19/16
19/16
19/16
19/16
19/16
19/16
19/16
19/16
19/16
125/32
131/32
βββ34343434β34343434343434ββββ
Internal square drive G10 DIN 3121 (3/8β)Internal square drive G6.3 DIN 3121 (1/4β)
1313131313
13.515
15.916
17.519ββββββββ
hex. screwshex. nuts
in.
β5/8ββ3/4βββ
11/16β
11/4βββ
113/16131/32
ββ
29/16β
261/64β
311/32335/64
β315/16
β421/64417/32
β51/8ββ
3535353535353537
40.5ββββββββββββββββββββββββ
484848484848485050ββββββββββββββββββββββββ
803885820527803886820528803887820529803888803889803890
ββββββββββββββββββββββββ
short execution, non-magnetic
Internal square driveG 16 DIN 3121 (5/8")
hex. screwshex. nuts
Please order locking pin and rubber ring extra
ββ44444444444444464951546066ββββββββββββββββββ
ββ50505050505050545355585858ββββββββββββββββββ
Internal square driveH 20 DIN 3121 (3/4")
ββββββββ545454545763
69.574.581
87.5βββββββββββββββ
ββββββββ60636262626670708585βββββββββββββββ
ββββββββ
804430804431804432820533804433804434804435804436804437804438
βββββββββββββββ
Internal square driveH 25 DIN 3121 (1")
ββββββββββββββ8686879399106112118125131137143150156160ββββ
ββββββββββββββ8484909095100105110110115120125130135128ββββ
ββββββββββββββ
804450804451804452804453804454804455804456804457804458804459804460804461804462804463825633
ββββ
Internal square driveH 40 DIN 3121 (11/2")
βββββββββββββββββββββββββ
150156162169175188207218
mm
βββββββββββββββββββββββββ
140147147150152160170177
βββββββββββββββββββββββββ
804480804481804482804483804484804485804486804487
Internal square driveH 63 DIN 3121 (21/2")
orderno.
ββ
804410820530804411820531804412804413804414804415804416820532804417804418804419
ββββββββββββββββββ
orderno.
orderno.
orderno.
orderno.mm
13161718192122242730323436414650556065707580859095100105110115120130145155
AFin.mm
D
13/813/813/813/813/813/813/8
129/64119/32
ββββββββββββββββββββββββ
in.mmL
157/64157/64157/64157/64157/64157/64157/64131/32131/32
ββββββββββββββββββββββββ
in.mmD
ββ
147/64147/64147/64147/64147/64147/64147/64113/16115/1621/6421/8
223/64239/64
ββββββββββββββββββ
in.mmL
ββ
131/32131/32131/32131/32131/32131/32131/3221/823/32211/6429/3229/3229/32
ββββββββββββββββββ
in.mmD
ββββββββ
21/821/821/821/821/4
231/64247/64215/1633/1637/16
βββββββββββββββ
in.mmL
ββββββββ
223/64231/6427/1627/1627/16219/3223/423/4
311/32311/32
βββββββββββββββ
in.mmD
ββββββββββββββ
325/64325/64327/64321/32357/64411/64413/32441/64459/6455/32525/6455/8
529/3269/64619/64
ββββ
in.mmL
ββββββββββββββ
35/1635/16335/64335/64347/64315/1649/64421/64421/64417/32423/32459/6451/855/1653/64
ββββ
in.mmD
βββββββββββββββββββββββββ
529/3269/6463/8
621/32657/64713/3285/32837/64
βββββββββββββββββββββββββ
533/64525/32525/32529/32563/64619/64611/16631/32
Lin.
Sockets with female square drive
17
short execution, non-magnetic and magnetic
FOR MINIMAT-, RECYCLING, SLIP CLUTCH-, PULSE TOOLS, ELECTRIC SCREWDRIVER,IMPACT WRENCHES, EC-SERVO-SCREWDRIVER
18
D
L
Sockets with internal square drive DIN 3121
FOR MINIMAT-, RECYCLING, SLIP CLUTCH-, PULSE TOOLS, ELECTRIC SCREWDRIVER,IMPACT WRENCHES, EC-SERVO-SCREWDRIVER
Extensions with internal square drive DIN 3121
AFmm
AFin.
Dorder no.
long execution, non-magnetic
789101112131617181921222427
1313
14.51616
17.519ββββββββ
45454545454545ββββββββ
803767/1803759/1820446/1803760/1820785/1820101/1812931/1
ββββββββ
β191919191922
24.525.526.528ββββ
β820872820873820874820875820876820877820878820879820880820881
ββββ
β25β25ββ253030303030
32.535
38.5
β85β85ββ858085808080858585
β804400
β804401
ββ
804402820534804403820535804404820536804405804406804407
β5/16
β
β
β
β
β5/8
β
β3/4
β
β
β
11/16
1/21/29/165/85/8
11/163/4
ββββββββ
13/4
13/4
13/4
13/4
13/4
13/4
13/4ββββββββ
β3/43/43/43/43/47/8
31/32
113/64
13/32
ββββ
β2222222222ββββ
β1β1ββ1
13/16
13/16
13/16
13/16
13/16
19/32
13/8
133/64
β51515151515151515151ββββ
Lmm in.mm in.
Dorder no.
Lmm in.mm in.
Dorder no.
Lmm in.mm in.
β311/32
β311/32
ββ
311/32
35/32
311/32
35/32
35/32
35/32
311/32
311/32
311/32
Internal square drive G12.5 DIN 3121 (1/2β)Internal square drive G10 DIN 3121 (3/8β)Internal square drive G6.3 DIN 3121 (1/4β)
orderno
803891β
803892β
803893803894803895
βββββββββββββββββββ
long execution, non-magnetic
Internal square driveG 16 DIN 3121 (5/8")
hex. screwshex. nuts
44β4444444444464951546067βββββββββββββ
100β
100100100100100100100100100100100βββββββββββββ
804420β
804421820537804422804423804424804425804426820538804427804428804429
βββββββββββββ
Internal square driveH 20 DIN 3121 (3/4")
βββββ54545454545763
69.574.581
87.5ββββββββββ
βββββ
110110110110108108108110115115115ββββββββββ
βββββ
820067804440804441804442820539804443804444804445804446804447804448
ββββββββββ
Internal square driveH 25 DIN 3121 (1")
ββββββββββββ8686879399106112118125131137143150156
ββββββββββββ
130140140140150150160170170180180190200200
ββββββββββββ
804465804466804467804468804469804470804471804472804473804474804475804476804477804478
Internal square driveH 40 DIN 3121 (11/2")
Please order locking pin and rubber ring extra
AFmm
1718192122242730323436414650556065707580859095100105110
ββ3/4
βββ
11/16
β11/4
βββ
113/16
131/32
ββ
29/16
β261/64
β311/32
335/64
β315/16
β421/64
mm
35β35β3537
40.5βββββββββββββββββββ
mm
90β90β909090βββββββββββββββββββ
in. in.D L
mm mmin. in.D L order
no mm mmin. in.L order
noD
mm mmin. in.L order
noDAF
in.
13/8
β13/8
β13/8
129/64
119/32
βββββββββββββββββββ
335/64
β335/64
β335/64
335/64
335/64
βββββββββββββββββββ
315/16
β315/16
315/16
315/16
315/16
315/16
315/16
315/16
315/16
315/16
315/16
315/16
βββββββββββββ
βββββ
421/64
421/64
421/64
421/64
41/4
41/4
41/4
421/64
417/32
417/32
417/32
ββββββββββ
βββββ21/8
21/8
21/8
21/8
21/8
21/4
231/64
247/64
215/16
33/16
37/16
ββββββββββ
ββββββββββββ
325/64
325/64
327/64
321/32
357/64
411/64
413/32
441/64
459/64
55/32
525/64
55/8
529/32
69/64
ββββββββββββ51/8
533/64
533/64
533/64
529/32
529/32
619/64
611/16
611/16
73/32
73/32
731/64
77/8
77/8
147/64
β147/64
147/64
147/64
147/64
147/64
113/16
115/16
21/64
21/8
223/64
241/64
βββββββββββββ
hex. screwshex. nuts
mm191919β
mm75150300β
orderno.
804490804491804492
β
internal-οΏ½external-οΏ½
G 10 DIN 3121 (3/8β)E 10 DIN 3121 (3/8β)
G 12.5 DIN 3121 (1/2β)E 12.5 DIN 3121 (1/2β)
H 20 DIN 3121 (3/4β)F 20 DIN 3121 (3/4β)
H 25 DIN 3121 (1β)F 25 DIN 3121 (1β)
H 40 DIN 3121 (11/2β)F 40 DIN 3121 (11/2β)
Please order locking pin and rubber ring extra
in. in.3/43/43/4β
261/64529/321113/16
β
D Lmm252525β
mm75125250β
orderno.
804493804494804495
β
in. in.63/6463/6463/64β
261/64459/64927/32β
D Lmmβ444444
mmβ175250330
orderno.β
804497804498804499
in. in.β
147/64147/64147/64
β657/64927/32
13
D Lmm54545454
mm100175250330
orderno.
804500804501804502804503
in. in.21/821/821/821/8
315/16657/64927/32
13
D Lmm8686ββ
mm250380ββ
orderno.
804505804506
ββ
in. in.325/64325/64
ββ
927/321431/32
ββ
D L
19
D
L
d
max 35Β°
d
L
D
Chuck for stud screws with internal square drive DIN 3121
FOR IMPACT WRENCHES, PULSE TOOLS, EC-SERVO SCREWDRIVER
Ball joint with internal square drive DIN 3121
Please order locking pin and rubber ring extra
Dmmin.
165/8
dmmin.
165/8
L = 43 mmorder no.
804518 2255/64
2255/64
L = 58 mmorder no.
804510 2817/64
2817/64
L = 78 mmorder no.
804511 3811/2
3811/2
L = 95 mmorder no.
804512 5323/32
5323/32
L = 128 mmorder no.
804513
internal-οΏ½external-οΏ½
G 6.3 DIN 3121 (1/4β)E 6.3 DIN 3121 (1/4β)
G 12.5 DIN 3121 (1/2β)E 12.5 DIN 3121 (1/2β)
H 20 DIN 3121 (3/4β)F 20 DIN 3121 (3/4β)
H 25 DIN 3121 (1β)F 25 DIN 3121 (1β)
86325/64
86325/64
L = 178 mmorder no.
804514
H 40 DIN 3121 (11/2β)F 40 DIN 3121 (11/2β)
G 10 DIN 3121 (3/8β)E 10 DIN 3121 (3/8β)D
mmin.
dmmin.
Dmmin.
dmmin.
Dmmin.
dmmin.
Dmmin.
dmmin.
Dmmin.
dmmin.
orderno.mm mm mm
M 4M 5M 6M 8M 10M 12M 14M 16M 18M 20M 22M 24M 27M 30M 33
stud screws
Internal square driveG 10 DIN 3121 (3/8β)
Internal square driveG 12.5 DIN 3121 (1/2β)
Internal square driveH 20 DIN 3121 (3/4β)
Internal square driveH 25 DIN 3121 (1β)
3535353535ββββββββββ
2222222222ββββββββββ
6565656565ββββββββββ
790025 A790025 B790025 C790025 D790025 E
ββββββββββ
Please order locking pin and rubber ring extra
13/813/813/813/813/8ββββββββββ
55/6455/6455/6455/6455/64ββββββββββ
29/1629/1629/1629/1629/16ββββββββββ
D d Lin. in. in.
orderno.mm mm mm
βββ4747474747βββββββ
βββ2828282828βββββββ
βββ7984848484βββββββ
βββ
390203 A390203 B390203 C390203 D390203 E
βββββββ
βββ
127/32127/32127/32127/32127/32βββββββ
βββ
17/6417/6417/6417/6417/64βββββββ
βββ
37/6435/1635/1635/1635/16βββββββ
D d Lin. in. in.
orderno.mm mm mm
ββββββ606060606060βββ
ββββββ414141414141βββ
ββββββ959595959595βββ
ββββββ
390135/1 A390135/1 B390135/1 C390135/1 D390135/1 E390135/1 F
βββ
ββββββ
223/64223/64223/64223/64223/64223/64βββ
ββββββ
139/64139/64139/64139/64139/64139/64βββ
ββββββ
347/64347/64347/64347/64347/64347/64βββ
D d Lin. in. in.
orderno.mm mm mm
βββββββββ666666666666
βββββββββ545454545454
βββββββββ131131131131131131
βββββββββ
390168 A390168 B390168 C390168 D390168 E390168 F
βββββββββ
219/32219/32219/32219/32219/32219/32
βββββββββ21/821/821/821/821/821/8
βββββββββ
55/3255/3255/3255/3255/3255/32
D d Lin. in. in.
Threadsize
AFin.
L = 35 mm= 13/8 in.order no.
1/8
βββββ5/16
ββββββββ3/43/4
ββ
11/16
ββ
804525804526804527804528804528820046804529804530804530804531804531804532804532820215820215
βββββββ
order no.
804520804521804522804519
804523/1804524
Bits
external hex. drive
internalhex. screws
L = 40 mm= 137/64 in.order no.
ββββββββ
804533804533804534804534804535804535804536804536
βββββββ
L = 50 mm= 131/32 in.order no. mm
ββββββββββββββββ
804537804537804541804542804619804574804618
internalsquare drive
DIN 3121
G 10 (3/8β)G 12.5 (1/2β)H 20 (3/4β)H 20 (3/4β)H 25 (1β)H 25 (1β)
internalhex. drive
7/16β (11.1 mm)7/16β (11.1 mm)5/8β (15.9 mm)7/8β (22 mm)
5/8β (15.9 mm)7/8β (22 mm)
223044445454
323852606870
5/8β 7/8β7/16β
Please order locking pin and rubber ring extra
L
external hex. drive
Holder
D
L
internal square driveinternal hex. drive
threaded pinswith internal hex.
AFmm3456678101012121414171719192224273236
D Lin. in.
55/6413/16147/64147/6421/821/8
55/6413/16147/64147/6421/821/8
11/411/223/64223/64243/6423/4
mm
Tech
nica
l alte
ratio
ns re
serv
ed -
Fri
for sockets, holder, extensions, ball joints and chucks for stud screws
for bitwith external hex. drive C 6.3 DIN 3126 (1/4β)
Lmm / in.
non-magneticorder no.
65 / 29/16 825021
External square drive Lmm / in.
order no.
E 10 DIN 3121 (3/8β)E 12.5 DIN 3121 (1/2β)F 20 DIN 3121 (3/4β)
50 / 131/3254 / 21/876 / 3
804365/1804366/1804363/1
for sockets
L
External hex. driveE11.2 DIN 3126 (7/16β)
External hex. driveE11.2 DIN 3126(7/16β)
Internal hex. driveD6.3 DIN 3126(1/4β)
L
Dmm / in
11.1 / 7/16
FOR IMPACT WRENCHES, PULSE TOOLS, EC-SERVO SCREWDRIVER
Holder
Locking pins and rubber rings
FOR IMPACT WRENCHES WITH QUICK CHANGE CHUCK (INTERNAL HEX. DRIVE DIN 3126 F11.2)
Bits
D
G 10 (3/8β)G 12.5 (1/2β)G 12 .5 (1/2β)G 16 (5/8β)H 20 (3/4β)H 25 (1β)H 40 (11/2β)H 40 (11/2β)H 63 (21/2β)
Internalsquare driveDIN 3121
Sockets ExtensionBall jointHolder
Chuck forstud screws
AFmm mm
Rubber ring
7-198-1316-278-2717-4627-6046-9095-110100-155
19/2225
28/3035
38/445486ββ
22β28β4154βββ
Locking pin
l
d Dd
order no.
802513803370802499802524802546802547802548802468802468
mm in.
14182024344272114114
1/81/85/325/327/3219/6417/6427/6427/64
9/32-3/45/16-33/645/8-11/165/16-11/16
43/64-113/1611/16-223/64113/16-335/64347/64-421/64315/16-67/64
3/4 / 55/64 63/64
17/64 / 13/1613/8
11/2 / 147/6421/8
325/64ββ
55/64β
17/64β
139/6421/8βββ
D dmm
3344
5.57.56.510.510.5
35/6445/6425/3215/16111/32121/32253/64431/64431/64
in.order no.
800078802348800012802346800056804546804547804549804548
mm in.
2.533345568
5/825/3215/1617/64117/64149/64261/64421/64417/32
d lmm
16202428324575110115
3/321/81/81/85/32
13/6413/641/45/16
in.AFin. in in.
D dmm
AFin.
ββ
5/16βββββ
Internalhex. screws
Threaded pinswith internal hex. drive
order no.
804515804516804538804539804539804540804540804517
55
External hex. drive E11.2 DIN 3126 (7/16β)
AFmm
5681010121214
C E R T I F I E D A S P E R D I N E N I S O 9 0 0 1
DEPRAG SCHULZ GMBH u. CO.P.O. Box 1352, D-92203 Amberg, GermanyKurfΓΌrstenring 12β18, D-92224 AmbergPhone (0 96 21) 371-0, Fax (0 96 21) [email protected]