Based on its experience of in-die solutions, PRONIC has developed a complete system for in-die components insertion.
The insertion heads are mainly solid mounted on the lower shoe, therefore no continuous movement is applied on the different parts involved.
Being independent from the kinematics of the die, each inserting head can be shared from die to die.
The installation is done in a few minutes with the quick installation kit and the quick supplied connections for electrical, pneumatic and component.
A kart connected with the press is feeding the insertion head through vibrating bowls and blowpipe.Several references and dimensions of components can be inserted simultaneously with a speed up to 40 parts per minute per head.
PRONIC guarantees 100% well inserted components with its dedicated sensor system.
INSERTION RANGEIn-die insertion kart and head
As for in-die tapping, you get the ful l service:Choosing an in-die insertion system from PRONIC means that you have choosen the highest possible performance during each step of your project:
• Assistance to define the most appropriate solution
• Assistance during die design
• Assistance in order to optimize the concept
• Assistance in starting-up your die
• After-sales service
The complete in-die
insertion machine that fits
your needs and even more
Advantages:
• Safeoperation: Multiple sensors are monitoringthe insertion process in the Head and the trolley.
• Quick Installation kit: Fast and easy to install,without need for specific tool
• Industrialquickcouplingoneveryconnexion:Air,Motion control, Pipe
• Reducedinvestments:Same insertion head couldbe shared between several tools
• Secured process: detection of the presence ofcomponent and quality of insertion with dedicated DETEC system
Please Order From: Clark & Osborne, LLP 6617 Ferguson Avenue Indianapolis, IN 46220
317-255-5668 Phone317-253-4486 [email protected]
• Head shared from one die to another.
• Any bushing from Ø8 to Ø20 mm.
• Many other components can be in-die inser-ted. Contact us for quotation
• Up to 40 parts inserted per minute per head.
• Solid mounted (on the lower shoe) for inser-tion from bottom to top, therefore highly reliable.
• Insertion also available from top to bottomdepending on your die configuration.
• Easy integration in the die.
• Quick installation kit: no need for specialtools and quick connection for all plugs.
• Feeding of components from kart to head byflexible blow pipe.
• Compact design: Heads are 95 mm wide forbushings.
• Guarantee of 100% parts insertion with dedi-cated sensor.
MAIN FEATURES:
Insertion Head features:
Head protected against pollution with housing
Safe operation: detection of the component before insertion
Quick installation kit (no need for special tool)with integrated POKA YOKE mistake-proofing
Quick connections for electrical and pneumatic power
Quick connections for flexible blowpipe
Components are blown through flexible pipe
All movements inside the insertion are controlled by sensors
Sensor to guarantee 100% inserted components
Feeding Kart features:
Easy to use:Color Touch screen with user-friendly interfacce to manage the system
Quick connections for flexible blowpipe and electrical and pneumatic power
Production autonomy with secured hoppers
Keying of components into vibrating bowl with protected access to loading
Safe operation: Detection of components before blowing
Rack for un-used blowpipe
Stable operation : Air accumulation vessel
One connection with the press:system is managed by the Kart
Fast to implement : Kart is equipped with wheels
Please Order From: Clark & Osborne, LLP 317-255-5668 Phone6617 Ferguson Avenue 317-253-4486 FAXIndianapolis, IN 46220 [email protected]
9440
-302
2-B
- In
sert
ion
rang
e - 1
0/20
14
Pict
ures
and
tex
t are
not
con
trac
tual
s
- Insertion of M10 nut and Ø15 bushing- Insertion from top to bottom- Insertion Heads are installed on the stripper
Note: Also includes 12 spindle tapping station
Speed: 12 spm
- Insertion of pins- Insertion from top to bottom- Insertion Heads are installed on a pressure pad
Speed: 30 spm
- Insertion of bushing- Insertion from bottom to top- Insertion Heads are solid mounted on the lower shoe
Speed: 22 spm
Some examples of current appl icat ions:In-diebushinginsertion:
In-diepinsinsertion:
In-dienutandbushinginsertion: