1
Stucki Brake Beam—Angle Corrected, Reversible Strut Stucki Extended Travel—Metal Capped Stucki Standard Travel—Metal Capped Resilient Friction Elements Height & Wear Indicator Inspection Additional Wear Indicator Inspection Setup Height Measurement & Adjustment Hydraulic Stabilizers Plates & Wedges Inspection and Maintenance Chart Stucki Standard Travel—Dual Action Model ISB-12 5400 lb. Preload Model ISB-9DR 4500 lb. Preload Model ISB-10 4500 lb. Preload Stucki Standard Travel—Nonmetal Capped Model 656-CR 6000 lb. Preload Model 690-RL 3600 lb. Preload Model 688-BR 6000 lb. Preload Tank Car Options Model 675-RL 3000 lb. Preload Model 685-RM 4500 lb. Preload Model 656-CRH 5400 lb. Preload RetroXT LP Bolt−On For most Standard and Extended (long) Travel metal capped bearings, a quick reference visual height indicator is shown for at-a-glance checking. (Side bearings are shown at free height.) Brake beams available with replaceable heads, optional reversible strut, and diagonally corrected end extensions. (See A. Stucki Product Guide for more information. Also refer to AAR Rule 6 in the Field Manual for inspection and wear limit criteria.) Upgrade to extended travel with RetroXT 5400C Used for Barber Trucks Used for Ride Control Trucks Used for Super Service Ride Control Trucks Used for Barber S-2-HD Trucks Used for Super Service Ride Master Trucks Upgrade to extended travel with RetroXT 5400B Upgrade to extended travel with RetroXT 5400B Upgrade to extended travel with RetroXT 4500 Upgrade to extended travel with RetroXT 5400B Upgrade to extended travel with RetroXT 5400C Standard Travel—Metal Capped, Extended Travel—RetroXT 4500, 5400B, 5400C Setup is at 5-1/16” when top of cage is aligned at lateral center of top notch. Extended Travel—CCB Setup is at 5-1/16” when top of cage is aligned with bottom of cap cutout. Extended Travel—Metal Capped Retrofit, LP, SP Setup is at 11/16” when bottom edge of cap is aligned with base step. Extended Travel—Metal Capped LPC Setup is at 11/16” when cap step is aligned with top of base. Method 1 Method 2 Method 3 For field inspection criteria, refer to Rule 62 in the AAR Field Manual. RetroXT LP Drop−In RetroXT LPC RetroXT SP Drop−In tel. 412.771.7300 www.stucki.com Wedge Style RetroXT LP, SP, and LPC CSB and SSB Stucki Extended Travel—Metal Capped Retrofit RetroXT 5400B RetroXT 5400C RetroXT 4500 Nominal 11/16" Tolerance ±1/16" Nominal 3/4" Tolerance ±1/16" Field Setup Height Shop Setup Height RetroXT LPC (Measurement Method 1) New Nonmetallic Liner Metal or Used Nonmetallic Liner 11/16" Nominal ±1/8" Tolerance Nominal 11/16" Tolerance ±1/16" Nominal 3/4" Tolerance ±1/16" RetroXT SP and LP (Measurement Method 2) Shop Setup Height Field Setup Height Metal or Used Nonmetallic Liner New Nonmetallic Liner 11/16" Nominal ±1/8" Tolerance Nominal 5-1/16" Tolerance ±1/16" Nominal 5-1/8" Tolerance ±1/16" All Remaining Side Bearings (Measurement Method 3) Shop Setup Height Field Setup Height Metal Liner Elastomeric Liner or Lube Disc 5-1/16" Nominal ±1/8" Tolerance Model SSB ® Model CSB ® Model CCB HydraShox™ Gold Series HS-7-100 HydraShox™ Platinum Series RFE-16 RFE-18 RFE-26 RFE-41 RFE-53 Note: To order cage or side bearings, state Model Name + Preload + XT 2600 Neville Road • Pittsburgh, PA 15225 • tel. 412.771.7300 • fax 412.771.7308 • [email protected] For more information, refer to the A. Stucki Co. Product Guide. www.stucki.com Rev. 2 - 1/08 Ride Control and Super Service Ride Control are federally registered trade marks of ASF-Keystone, Inc. Barber is a federally registered trade mark of Barber, Inc. | Using any other manufacturer’s parts on A. Stucki Company products will void all warranties. Using any other manufacturer’s parts on A. Stucki Company products will void all warranties.
![Differential equation-based minimal model describing ......oscillations by Higgins [16] and Sel’kov [17] and for calcium oscillations by Somogyi & Stucki [18]. Here, we employ the](https://static.documents.pub/doc/80x56/5f838f693fb7850a99644382/differential-equation-based-minimal-model-describing-oscillations-by-higgins.jpg)
