+ All Categories
Home > Environment > Inspira-Sorb Acoustic Panels

Inspira-Sorb Acoustic Panels

Date post: 14-Feb-2017
Category:
Upload: gary-philipson
View: 298 times
Download: 1 times
Share this document with a friend
8
iNSpira-Sorb Our iNSpira-Sorb is a high quality sound absorbing panel system. The panels are designed as a wall lining to control reverberant noise in areas with hard surfaces. iNSpira-Sorb acoustic panel system improves the quality of the workplace environment due to the products ability to which is available in a vast range of fabric colours. Cl/SfB (35) Sm1 Inspired Noise Ltd November 2015 absorb echo and reverberation. Designed with a fabric finish
Transcript
Page 1: Inspira-Sorb Acoustic Panels

iNSpira-SorbOur iNSpira-Sorb is a high quality sound absorbing panel

system. The panels are designed as a wall lining to control

reverberant noise in areas with hard surfaces.

iNSpira-Sorb acoustic panel system improves the quality of

the workplace environment due to the products ability to

which is available in a vast range of fabric colours.

www.inspirednoise .com

Cl/SfB(35) Sm1

Inspired Noise Ltd

November 2015

absorb echo and reverberation. Designed with a fabric "nish

Page 2: Inspira-Sorb Acoustic Panels

What is ShushRaft

for areas where there is an echo and reverberation problem.

restaurants, studios, sports and community halls and meeting rooms.

The list is endless.

iNSpira-Sorb panels perform on several fronts. As well as solving

your acoustic problem, they also come to you pre-decorated to

into your desired setting. Ideal for any internal environment where

of space. Designed to transform any area into a vehicle for creating

the perfect impression.

iNSpira-Sorb acoustic wall panels are available in standard size

panels and can be manufactured in customised sizes to meet your

requirement. The iNSpira-Sorb acoustic wall panels can change the

a wide variety of fabric colours which come in both standard and

choice. Should this be the chosen option a small sample of the fabric

would be required to check suitability.

iNSpira-Sorb is applied to the wall with impaling clips and

iNSpira-Bond contact adhesive.

ADVANTAGES OF iNSpira-Sorb:

• Outstanding sound absorption performance – Class A and Class C

• Over 100 standard fabric colours available

• High content of recyclable material

• Easy installation method

• Very quick availability

What is iNSpira-Sorb?

22

† Detailed information on each system & its corresponding

installation can be found from page 4.

System 1 T-System

System 2 Line System

System 3 Bespoke System

System 4 Shapes

Acoustic Fabric

Thickness:25mm (Class C Sound Absorption)

40mm (Class A Sound Absorption)

Sound absorbing core

iNSpira-Sorb acoustic wall panels o"er a fabric faced panel solution

The acoustic wall panels are extensively used in schools, o"ces,

o#er a tasteful level of decoration by injecting colour & texture

$rst impressions count and noise management enhances the quality

aesthetics of a room as well as making it acousticlly correct

superior fabric $nishes. Clients are able to select a fabric of their won

Page 3: Inspira-Sorb Acoustic Panels

CLEANING

Light dirt marks may be removed by using a

proprietary carpet spot cleaner. A small area should

be tested before doing the rest of the area to ensure

FIRE

complies with Class 1 to BS476: Part 7. Class O fabrics

can be supplied on request.

CUTTING

iNSpira-Sorb panels can be cut with a sharp Stanley

knife.

WEIGHT

Our iNSpira-Sorb panels weigh in at 3.5kg/m2 for the

25mm thickness panels. 40mm thickness panels weigh

4.5kg/m 2.

Note: All weights are given as approximations.

125 250 500 1000 2000 4000

1.2

1.0

0.8

0.6

0.4

0.2

Class C Acoustic Absorber - 25mm Thickness

Acoustic Performance BS EN ISO 354:2003

Frequency (Hz)

Higher absorption can be achieved when installed with a cavity

Class A Acoustic Absorber - 40mm Thickness

125 250 500 1000 2000 4000

1.2

1.0

0.8

0.6

0.4

0.2

Frequency (Hz)

Acoustic Performance BS EN ISO 354:2003

3

Technical + Acoustic Performance

iNSpira-Sorb core board has been tested and o"ers

that the fabric is not adversely a"ected.

Class O #re rating to BS476: Part 6. Fabric facing

Page 4: Inspira-Sorb Acoustic Panels

4

iNSpira-Sorb Bespoke System Components

iNSpira-Sorb Bespoke system allows for a secure installation of iNSpira-Sorb panels

without the added aesthetic of visible trims. Instead, each panel is custom manufactured

to the size required and the fabric is wrapped around all 4 edges. The panel is simply

bonded to the wall by using our impaling clips and iNSpira-Bond adhesive.

Our impaling clips & iNSpira-Bond contact adhesive make light work of installations

- Whether your applying panels to concrete, masonry, wood, plaster, or metal. Our

The correct clips & quantities will be included with your order, whatever the thickness.

Standard Sizes: (25mm or 40mm thickness)

1200 x 900mm 1200 x 2100mm

1200 x 1200mm 1200 x 2400mm

1200 x 1800mm 1200 x 2700mm

Due to the directional weave in our fabrics, it is essential that the height & width

dimension of each panel be stated when ordering

Dimensional tolerance of panels: +/- 4mm.

Impaling Clip

iNSpira-Sorb Bespoke System

We recommend using the following number of impaling clips for the appropriate

panel sizes. iNSpira-Sorb Contact Adhesive

0 to

1200mm

up to 2700mm

up to

1200mm

1201 to 2700mm

impaling clips are available in 2 di"erent depths to accommodate both panel thicknesses

Page 5: Inspira-Sorb Acoustic Panels

or damage prior to installation. Once installation has been commenced, the

panels are deemed to have arrived in perfect condition – any of the above

reported after installation will not be covered by your warranty

Spray iNSpira-Bond contact adhesive vertically onto the panels

reverse surface and horizontally onto the desired installation

area. Be sure to spray over the clips with iNSpira-Bond!!

iNSpira-Bond should be applied to 100% of the surface area on

both surfaces !!

After waiting for the adhesive to dry (2-5 minutes at 23°C) carefully align

the panel to the marked area and push gently - allowing the clip spikes

been made with the wall.

Lightly trace the panel edges onto the desired installation area. Then suitably

Installation

Step 1

Step 2 Step 3

5

INSPIRED NOISE (uk) LTD will not accept any liability for the loss or damage that may occur of any kind which is outside our control. We strongly instruct to make sure the product suitability is con$rmed by doing your own tests. Panels MUST be checked for colour shading

di%erences, &aws, defects or damage prior to installation. Once installation has been commenced, the panels are deemed to have arrived in perfect condition - Any of the above reported after installation will not be covered by your warranty

to bite into the panel. Once con$dent with the panel positioning, press

$rmly over the entirity of the surface and ensure maximum contact has

Note: Panels MUST be checked for colour shading di%erences, &aws, defects

and securely $x the appropriate number of clips using screws.

Page 6: Inspira-Sorb Acoustic Panels

Whatever your décor – Whatever your style – we are sure to have you covered with our extensive range of fabric colours.

Fabric Colours

6

!!! Please note that the above colors are representative of the actual colours which may vary in shade or texture. We are able to provide actual fabric colour card upon request !!!

SH208

SH210

SH133 SH215 SH101

SH79 SH08

SH12 SH204SH80

SH09

SH157 SH213 SH203SH165

SOFT TOUCH COLOUR RANGE

Glass EJ004Clan EJ169

Beltane EJ193

Lora EJ187 Ronay EJ189 Easdale EJ188

Cluanie EJ180

Adriatic EJ154 Dolphin EJ105 Inverness EJ175 Galilee EJ125

Walten EJ011

Austen EJ173 Shetland EJ191 Lerwick EJ194

Lossie EJ197 Tummel EJ038 Pitlochry EJ076 Maree EJ195 Fairisle EJ186 EJ185 Carron EJ015

Chaucer EJ172 Portland EJ016 Lead EJ104 Hillswick EJ190 Denny EJ196

Merrick EJ048 Spray EJ033

Black EJ138

Lomond EJ192

CARA COLOUR RANGE

Page 7: Inspira-Sorb Acoustic Panels

7

LUCIA COLOUR RANGE

Adobo YB165 Oyster YB107 Solano YB088

Turtle YB098

Campeche YB301

Apple YB096

Arecibo YB099

Aruba YB093

Belize YB105

Bermuda YB084

Blizzard YB108

Bluebell YB097

YB097

Bridgetown YB102

Buru YB170

Calypso YB106

Costa YB026

Diablo YB101

Havana YB009

Jamaica YB027 Lobster YB087 Madura YB156

Marianna YB157 Martinique YB004

Mauve YB069Monserrat YB011

Ocean YB100

Tortuga YB168Reef 580BY

Rum YB086

Sandstorm 203BY

Scuba YB089

Slip YB094

Sombrero YB046

Steel YB095

Taboo YB045

Tarot YB090 Tobago YB030

Windjammer YB047

Tequilla YB038

Rotation AL022

L2 COLOUR RANGE

Vertex AL027 Value AL006Subtract AL013

Cuboid AL025

Positive AL019

Tangent AL026

Multiply AL014

Helix AL021Symmetry AL024

Divide AL015

Algebra AL005

Page 8: Inspira-Sorb Acoustic Panels

Unit 1, Tarran Way South, Tarran Way Industrial Estate, Moreton, Wirral CH46 4TP, United Kingdom

Tel: 0151 677 8650 E. [email protected] W. www.inspirednoise.com

3. Delivery, Storage & Handling

Protect iNSpira-Sorb Wall Panels from excessive moisture when storing, and handling.

1. Product

Install with the following components:

2. Finish

Fabric colour to be chosen from the INSPIRED NOISE standard range: Soft Touch Colour............................ SH ..........................

L2 Colour............................ AL ..........................

Lucia Colour............................ YB ...........................

Cara Colour............................ EJ ...........................

4. Installation

Install acoustic wall panels in locations indicated, top edges level and in alignment with other panels. Comply with manufactures written instructions for

5. Cleaning

A. After completion of installation of panels, remove dust on panels.

B. Remove surplus material, rubbish, and debris resulting from panel installation, on completion of the work, and leave areas of installation in a

neat and clean condition.

6. Supplier

iNSpira-Sorb acoustic panel system as supplied by

Inspired Noise (uk) Ltd, Unit 1, Tarran Way South, Tarran Way Industrial Estate, Moreton, Wirral CH46 4TP, United Kingdom

Tel: 0151 677 8650 E. [email protected] W. www.inspirednoise.com

iNSpira-Sorb Bespoke Panel System

Size of panel: ..............mm (h) x ..............mm (w)

25mm thick Class C Absorption

40mm thick Class A Absorption

iNSpira-Bond iNSBond 500ml Cans

Impaling clips

installation of panels using the type of "xing accessories indicated as recommended by the manufacturer

www.creatingcalminteriors.com


Recommended