Installation guide
ICFD 20/ ICFD 20C Defrost Module Disassembly / Assembly
027R
9976
027R
9976
© Danfoss | DCS (MWA) | 2018.11 AN250286497620en-000401 | 1
Module mounting on ICF
ICF
O-ring G9
O-ring x 2 G8 Inlet connector
4 Nm (3 ft lbs) (A/F 13 mm)
35Nm (25.8 ft lbs)(A/F 17 mm)
Disassembly of the orifice holder
A/F 17 mm
4 mm allen key
Orifice holder
40 Nm (29.5 ft lbs) (A/F 19 mm)
80 Nm (59 ft lbs)(A/F 36mm)
A/F 4 mm
Applyforce
1 2
3 4 5
Thread: G1/4”
© Danfoss | DCS (MWA) | 2018.11 AN250286497620en-000401 | 2
Disassembly of the orifice holder
10 Nm (7.4 ft lbs) (A/F 10 mm)
Liquidorifice
Slider
O-ring
O-ring
Applyforce
Assembly of the orifice holder
5 Nm (3.7 ft lbs) (3 mm allen key)Liquid
orifice
Slider
O-ring
O-ring
35Nm (25.8 ft lbs)(A/F 17 mm)
3 mm allen key
Replacing the AKV orifice
6 7 8
1 2 3
4 5 6
7
4 Nm (2.9 ft lbs)
5 Nm (3.7 ft lbs)(4 mm allan key)
5 Nm (3.7 ft lbs)(4 mm allan key)
© Danfoss | DCS (MWA) | 2018.11 AN250286497620en-000401 | 3
Disassembly of the manual opener
A/F 36 mm
Alu gasket G11
3 mm allen key
O-ring
Assembly of the manual opener
5 Nm (3.7 ft lbs) (3 mm allen key)
Position A
80 Nm (59 ft lbs) (A/F 36 mm)
Alu gasket G11
1 2
1
2
© Danfoss | DCS (MWA) | 2018.11 AN250286497620en-000401 | 4
