www.ventsus.com MIU_07-01
Bodor Vents, LLC DBA: VENTS-US11013 Kenwood Road Cincinnati, Ohio 45242Phone: (513)348-3853 e-mail: [email protected]
INLINE MIXED-FLOW FANS IN SOUND-INSULATED CASING
TT SILENT M 100/125/150/160/200/250/315
INSTALLATION GUIDE
Tools required
Pencil Drill Screwdriver Dowel (4 pcs.) Screws (4 pcs.)
MOUNTING While mounting the fan provide extra protection against water ingress.Сonnect an air duct on both sides of the fan .We recommend minimum 40’ of insulated flexible duct between any exhaust grill and fan for low noise level. .
3
2
min v40 vinch min v40 vinch
www.ventsus.com MIU_07-01
Bodor Vents, LLC DBA: VENTS-US11013 Kenwood Road Cincinnati, Ohio 45242Phone: (513)348-3853 e-mail: [email protected]
1) Disconnect the fan from power supply. 2) Mark holes on the wall.3) Drill the holes and insert the expansion anschors. 4) Fix the fan. 5) Connect air ducts
5
5
2
3 4
QF
1
Connection of the fan and standard wall socket
120VAC, 60Hz
GREENGROUNDSCREW
WALL SOCKET
EARTH
BREAKER
BREAKER BOX
www.ventsus.com MIU_07-01
Bodor Vents, LLC DBA: VENTS-US11013 Kenwood Road Cincinnati, Ohio 45242Phone: (513)348-3853 e-mail: [email protected]
The fan must be connected using durable, insulated and heat-resistant cables and wires. 1) Disconnect the fan from power supply. 2) Remove the cover from the terminal block. 3) Remove the cable clamp.4) Connect the cables according, install the cable clamp.5) Install the terminal block cover6) Сonnect the fan from power supply.
ТТ Silent-М 100/125/150
1 2 3
4 5 6
N
LN
L
QF X
~120V 60Hz
PE
ТТ Silent-М 200/250/315
1 2 3
4 5 6
N
LN
L
QF X
~120V 60Hz
PE