KIT FEATURES: The SWC-01 is designed to retain the factory steering wheel controls that are normallylost when replacing the original factory radio with an aftermarket radio.
PontiacAztek 2001-2005Bonneville 1998-1999Firebird 1998-2002G6 2005Grand Am 1998-2000Grand Am 2001-2005Grand Prix 1999-2003GTO 2004-2005Montana 1999Montana 2000-2005
- Wiring the SWC-01 ---------------------------------------------------------- 1- Radio DIP Switch Settings---------------------------------------- 2- Vehicle Applications--------------------------------------------------------- 3- 20 - Way GM Plug -----------------------------------------------------------3- 24 - Way GM Plug------------------------------------------------------ 4,5,6- 32 - Way GM Plug---------------------------------------------------------7,8- 22 - Way Chrysler Plug------------------------------------------------------9- 2 - Way Chrysler Plug------------------------------------------------------10- 20 - Way Ford Plug ---------------------------------------------------------11- 24 - Way Ford Plug ---------------------------------------------------------12- 17 - Way Ford Plug ---------------------------------------------------------13- 16 and 20 - Way VW Plugs ------------------------------------------------14- Mounting the Infrared L.E.D.----------------------------------------------15- Final Testing -----------------------------------------------------------------16
TA
BLE
OF
CO
NTEN
TS
SWC-01
1
Wiring The SWC-01Red (+) wire: connect this wire to a fused 12 volt accessory wireBlack (-) wire: connect this wire to the vehicles chassis groundGreen wire: steering wheel control wire for resistive type systems (see applications)Pink wire: steering wheel control wire for Data type systems (see applications)
Radio DIP Switch SettingsIf you look at the DIP switches on SWC-01 you will see that they are separated into 2groups of 8 DIP switches each. One side is labeled RADIO and the other side islabeled CAR. The chart below will show the DIP switch settings for the RADIO side.The CAR side will be listed with each individual vehicle inside this manual.
ONON
CAR RADIO
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
ONON
CAR RADIO
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
Refer to Vehicle Chart to select the proper dip switch position and move switch "up" or "down" with a small screwdriver to select vehicle model, radio brand, and external CD changer or external tuner/XM if present.
Example above represents a Chevrolet Suburban 2004-2005 with Sony radio and no external CD changer or external tuner/XM present.
• * Note: Do NOT plug in wiring harness into the SWC-01 until all DIP switch settings are set.
SWC-01
2
Locate the radio you are installing and set the DIP switches according to the chartbelow:
• * Note: For Pioneer radios installed with a Pioneer CD Changer or Satellite tuner use the following DIP switch
settings:
Without cd changer or satellite tuner – Switch 7 up, Switch 8 up With cd changer only– Switch 7 up, Switch 8 down With satellite tuner only– Switch 7 down, Switch 8 upWith cd changer and satellite tuner – Switch 7 down, Switch 8 down
Radio DIP Switch Settings
SWC-01
Vehicle ApplicationsEach application will have a connector view of the plug that is in the vehicle alongwith the wire color and location. The CAR DIP switch settings for the vehicles willalso be listed along with any other action required to finish the wiring in the vehicle.
For the vehicles listed above use the Green wire on the SWC-01 and set the CAR DIPSwitch settings as follows:Dip 1 Dip 2 Dip 3 Dip 4 Dip 5 Dip 6 Dip 7 Dip 8Up Down Up Up Up Down Up Up
SWC-01
(GM Continued From Previous Page)
Year Make Model Pin Wire Additional Wiring NeededLocation Color
2002-05 Buick Rendezvous A7 Dk. Blue Connect A6, Purple, to a 12 voltaccessory wire
2003-05 Chevy Blazer A7 Dk. Blue Connect A6, Dk. Green, to chassis ground
2000-05 Chevy Impala A7 Dk. Blue Connect A6, Pink, to chassis ground2000-05 Chevy Monte Carlo A7 Dk. Blue Connect A6, Pink, to chassis ground2003-04 Chevy S10 A7 Dk. Blue Connect A6, Dk. Green, to chassis
ground2003 GMC Jimmy A7 Dk. Blue Connect A6, Dk. Green, to chassis
ground2002 Oldsmobile Intrigue A7 Dk. Blue Connect A6, Purple, to chassis ground2005 Pontiac G6 A9 Dk. Blue Connect A10, White/Black, to
chassis ground2001-04 Oldsmobile Alero A7 Lt. green Connect A6, Pink, to chassis ground2001-05 Pontiac Grand Am A7 Lt. green Connect A6, Pink, to chassis ground
For the vehicles listed above use the Green wire on the SWC-01 and set the CAR DIPSwitch settings as follows:
Dip 1 Dip 2 Dip 3 Dip 4 Dip 5 Dip 6 Dip 7 Dip 8Down Down Up Up Up Down Up Up
5
Year Make Model Pin Wire Additional Wiring Needed
Location Color
2000-05 Chevy Venture A7 Dk. Blue Connect A6, Pink, to a 12 volt accessory wire
2000-04 Oldsmobile Silhouette A7 Dk. Blue Connect A6, Pink, to a 12 volt accessory wire
2001-05 Pontiac Aztek A7 Dk. Blue Connect A6, Purple, to a 12 volt accessory wire
2000-05 Pontiac Montana A7 Dk. Blue Connect A6, Pink, to a 12 volt accessory wire
2003-04 GMC Sonoma A7 Dk. Blue Connect A6, Dk. Green, to chassis ground
For the vehicles listed above use the Green wire on the SWC-01 and set the CAR DIP Switch settings as
follows:
Dip 1 Dip 2 Dip 3 Dip 4 Dip 5 Dip 6 Dip 7 Dip 8
Up Down Up Up Up Down Up Up
Year Make Model Pin Wire Additional Wiring Needed
Location Color
2004-05 Buick Century A7 Dk. Blue Connect A6, Purple, to chassis ground
2004 Buick Regal A7 Dk. Blue Connect A6, Purple, to chassis ground
2005 Chevy Equinox A9 Dk. Blue Connect A10, White/Black, to chassis ground
2004-05 Chevy Malibu A9 Dk. Blue Connect A10, White/Black, to chassis ground
For the vehicles listed above use the Green wire on the SWC-01 and set the CAR DIP Switch settings as fol-lows:
Dip 1 Dip 2 Dip 3 Dip 4 Dip 5 Dip 6 Dip 7 Dip 8
Down Down Down Up Up Down Up Up
Year Make Model Pin Wire
Location Color
2004-05 Buick Rainier A1 Orange
For the vehicles listed above use the Pink wire on the SWC-01 and set the CAR DIP Switch settings as follows:
Dip 1 Dip 2 Dip 3 Dip 4 Dip 5 Dip 6 Dip 7 Dip 8
Down Up Down Up Up Down Up Up
(GM Continued From Previous Page)
SWC-01
6
Year Make Model Pin Wire Location Color
2003-05 Cadillac Escalade A1 Orange
2003-05 Chevy Avalanche A1 Orange
2003-05 Chevy Silverado A1 Orange
2003-05 Chevy SSR A1 Orange
2003-05 Chevy Suburban A1 Orange
2003-05 Chevy Tahoe A1 Orange
2002-05 Chevy Trailblazer A1 Orange
2002-05 GMC Envoy A1 Orange
2003-05 GMC Sierra A1 Orange
2003-05 GMC Yukon A1 Orange
2003-05 Hummer H2 A1 Orange
2005 Isuzu Ascender A1 Orange
2002-04 Oldsmobile Bravada A1 Orange
For the vehicles listed above use the Pink wire on the SWC-01 and set the CAR DIP Switch settings asfollows:
Dip 1 Dip 2 Dip 3 Dip 4 Dip 5 Dip 6 Dip 7 Dip 8
Down Up Up Up Up Down Up Up
(GM Continued From Previous Page)
SWC-01
SWC-01
32 - Way GM Plug
Year Make Model Pin Wire Location Color
1996-99 Oldsmobile Aurora E5 Lt. Green
For the vehicles listed above use the Green wire on the SWC-01 and set the CAR DIPSwitch settings as follows:
Dip 1 Dip 2 Dip 3 Dip 4 Dip 5 Dip 6 Dip 7 Dip 8Down Up Up Down Up Down Up Up
For the vehicles listed above use the Green wire on the SWC-01 and set the CAR DIPSwitch settings as follows:
Dip 1 Dip 2 Dip 3 Dip 4 Dip 5 Dip 6 Dip 7 Dip 8Up Down Up Down Up Down Up Up
Year Make Model Pin Wire Location Color
1998-99 Buick Riviera E5 Lt. Green1998-05 Buick Park Ave. E5 Lt. Green1998-99 Buick Lesabre E5 or E6 Lt. Green1998-03 Buick Century E6 Dk. Blue1998-03 Buick Regal E6 Dk. Blue
7
SWC-01
8
(GM Continued From Previous Page)
For the vehicles listed above use the Green wire on the SWC-01 and set the CAR DIPSwitch settings as follows:Dip 1 Dip 2 Dip 3 Dip 4 Dip 5 Dip 6 Dip 7 Dip 8Up Down Down Up Up Down Up Up
For the vehicles listed above use the Green wire on the SWC-01 and set the CAR DIPSwitch settings as follows:Dip 1 Dip 2 Dip 3 Dip 4 Dip 5 Dip 6 Dip 7 Dip 8Up Down Up Up Up Down Up Up
Year Make Model Pin Wire Location Color
1997-05 Cadillac Deville E6 or F6 Purple1997-02 Cadillac Eldorado E6 or F6 Purple1997-04 Cadillac Seville E6 or F6 Purple2004-05 Cadillac XLR E6 Orange
For the vehicles listed above use the Pink wire on the SWC-01 and set the CAR DIPSwitch settings as follows:Dip 1 Dip 2 Dip 3 Dip 4 Dip 5 Dip 6 Dip 7 Dip 8Down Up Up Up Up Down Up Up
Year Make Model Pin Wire Additional Wiring NeededLocation Color
For the vehicles listed above use the Green wire on the SWC-01 and set the CAR DIPSwitch settings as follows:Dip 1 Dip 2 Dip 3 Dip 4 Dip 5 Dip 6 Dip 7 Dip 8Down Down Up Up Down Down Up Up
SWC-01
9
1 11
12 22
22 - Way Chrysler Plug
Year Make Model Pin Location Wire Color2002-04 Dodge Ram 14 Violet/Lt. Blue2002-04 Chrysler 300M 14 Violet/Yellow2002-03 Dodge Dakota 14 Violet/Yellow2002-03 Dodge Durango 14 Violet/Yellow2002-04 Dodge Intrepid 14 Violet/Yellow2002-04 Jeep Liberty 14 Violet/Yellow2002-04 Chrysler Sebring 14 White/Violet2002-04 Dodge Caravan 14 White/Violet2002-04 Dodge Stratus 14 White/Violet2002-04 Jeep Grand Cherokee 14 Yellow/Violet
For the vehicles listed above use the Pink wire on the SWC-01 and set the CAR DIPSwitch settings as follows:
Dip 1 Dip 2 Dip 3 Dip 4 Dip 5 Dip 6 Dip 7 Dip 8Down Up Up Up Up Down Down Up
SWC-01
10
2 - Way Chrysler Plug
1 2
Year Make Model Pin Wire Location Color
2001 Chrysler 300M 1 Violet/Yellow2001 Chrysler Sebring 1 Violet/Yellow2001 Dodge Dakota 1 Violet/Yellow2001 Dodge Durango 1 Violet/Yellow2001 DodgeI Intrepid 1 Violet/Yellow2001 Dodge Stratus 1 Violet/Yellow1999 Jeep Grand Cherokee 1 Violet/Yellow2001 Dodge Caravan 1 Violet/Yellow2001 Jeep Grand Cherokee 1 Yellow/Violet
For the vehicles listed above use the Pink wire on the SWC-01 and set the CAR DIPSwitch settings as follows:
Dip 1 Dip 2 Dip 3 Dip 4 Dip 5 Dip 6 Dip 7 Dip 8Down Up Up Up Up Down Down Up
SWC-01
20 - Way Ford Plug
Year Make Model Pin Wire Location Color
1998-02 Lincoln Continental 14 brown1998-02 Ford Crown Vic 14 lt. blue/red1998-03 Ford Expedition 14 lt. blue/red1998-04 Ford Excursion 14 lt. blue/red1999-02 Ford Windstar 14 lt. blue/red2003 Lincoln Aviator 14 lt. blue/red1998-02 Lincoln Town Car 14 lt. blue/red1999-03 Lincoln Navigator 14 lt. blue/red1998-02 Mercury Grand Marquis 14 lt. blue/red1999-01 Mercury Mountaineer 14 lt. blue/red2002 Ford Thunderbird 14 white/black2000-02 Lincoln LS 14 white/black1999-02 Mercury Villager 14 white/black1998-04 Ford Explorer 14 yellow2002-03 Mercury Mountaineer 14 yellow
For the vehicles listed above use the Green wire on the SWC-01 and set the CAR DIPSwitch settings as follows:
Dip 1 Dip 2 Dip 3 Dip 4 Dip 5 Dip 6 Dip 7 Dip 8Down Down Up Up Up Up Down Up
11
12
SWC-01
24 - Way Ford Plug
127812
131420
2124
Year Make Model Pin Wire Location Color
2004 Ford Expedition 18 lt. blue/red2004 Ford F-150 1 18 lt. blue/red2004 Ford Freestar 18 lt. blue/red2003 Lincoln Avaitor w/ CD6 radio 18 lt. blue/red2003 Mercury Marauder 18 lt. blue/red
For the vehicles listed above use the Green wire on the SWC-01 and set the CAR DIPSwitch settings as follows:
Dip 1 Dip 2 Dip 3 Dip 4 Dip 5 Dip 6 Dip 7 Dip 8Down Down Up Up Up Up Down Up
SWC-01
67 9
1
17 1514
17 - Way Ford Plug
Year Make Model Pin Wire Color Additional Wiring NeededLocation
2002 Ford Focus 11 white/black Connect pin 12, Brown/Yellow, to chassis ground
For the vehicles listed above use the Green wire on the SWC-01 and set the CAR DIPSwitch settings as follows:
Dip 1 Dip 2 Dip 3 Dip 4 Dip 5 Dip 6 Dip 7 Dip 8Down Down Up Up Up Up Down Up
13
SWC-01
16 and 20 - Way VW Plugs
1 4 7 10 13 16 19
2 5 8 11 14 17 206
3
129
15 18
14
Year Make Model Pin Wire Color Additional Wiring NeededLocation
For the vehicles listed above use the Green wire on the SWC-01 and set the CAR DIPSwitch settings as follows:
Dip 1 Dip 2 Dip 3 Dip 4 Dip 5 Dip 6 Dip 7 Dip 8Down Down Up Up Up Down Up Up
Year Make Model Pin Wire Color Additional Wiring NeededLocation
2004-05 Pontiac GTO C1 pin 11 Brown Connect pin 12 on C1,Black/Yellow, to chassis ground
For the vehicles listed above use the Green wire on the SWC-01 and set the CAR DIPSwitch settings as follows:
Dip 1 Dip 2 Dip 3 Dip 4 Dip 5 Dip 6 Dip 7 Dip 8Down Down Up Up Down Down Up Up
C2
C3
1
2
1
2
3
4
3
4
5
6
5
6
7
8
7
8
SWC-01
Mounting The Infrared L.E.D.
15
The infrared L.E.D. (I.R.E.D.) can be flushed mounted in a variety of locations withinthe cabin of the vehicle, the higher the location the better to prevent anything blockingthe I.R.E.D. . The I.R.E.D. is high intensity so it does not need to be pointed directly atthe radio, however the more towards the radio it points the better it will work. The dia-gram below shows possible mounting locations in a vehicle. These are just sugges-tions and you should use your best judgment as to the location of the I.R.E.D.
16
SWC-01
Continued From Previous Page
To mount the I.R.E.D. follow these steps:1)Before drilling any holes be sure to test the I.R.E.D. in the location you desire tomount it in by either holding the I.R.E.D. in place or use double sided tape to hold itinto position. 2)If the SWC-01 works properly you can now mount the I.R.E.D. If possible remove thepanel from the vehicle and drill a 5/16th inch hole. If the panel cannot be removed besure to check clearance behind the panel so not to damage any wiring with the drill bit.3)Take the I.R.E.D. and place the snap in mount over it. Feed the cable through themounting hole and snap the I.R.E.D. into the hole.4)Run the I.R.E.D. cable up to the SWC-01 and connect it. Tie up any loose wiring toprevent it from getting it caught on any moving parts.
Once all connections have been made, turn the radio on and adjust the steering wheelvolume controls up and down. If the volume controls do not work:1)Check to see if there is 12 volts on the red wire and the black wire is connected to agood ground. 2)Make sure the correct steering wheel control wire is used, green for resistive typesteering wheel controls and pink for data type steering wheel controls.3)Make sure the Dip switch settings are set correctly for your radio and vehicle.
