860M16 one way switch module Power Available (Neon/LED Permanently On) Neon/LED wires A/P N Load Switch On Indication (Neon/LED On, Switch On) Neon/LED wires A/P N Load Loop Terminal Loop Terminal 861M16 two way switch module Normal Operation A/P N Note: Neon/LED option not available 2 Way Switching A/P N Load 881M16SP (PRESS) two way spring return switch module A/P N Note: Switches can also be fitted with Neons/LEDs, see instructions as per 881M16S N Normally Closed (Terminal 2) Normally Open (Terminal 1) A/P Load Load Load 2 Way Switching A/P LOAD Wiring Diagrams
Transcript
860M16 one way switch module
Power Available(Neon/LED Permanently On)
Neon/LEDwires
A/P
N
Load
Switch On Indication(Neon/LED On, Switch On)
Neon/LEDwires
A/P
N
Load
LoopTerminal
LoopTerminal
861M16 two way switch module
Normal Operation
A/P
N
Note: Neon/LED option not available
2 Way Switching
A/P
N
Load
881M16SP (PRESS) two way spring return switch module
A/P
N
Note: Switches can also be fitted with Neons/LEDs, see instructions as per 881M16S
N
Normally Closed (Terminal 2) Normally Open (Terminal 1)
A/P
Load
Load
Load
2 Way Switching
A/P
LOAD
Wiring Diagrams
882M10N two way DP switch module with neon/LED
A/P
Note: Neon/LED is factory fitted and is not replacable. Neon/LED does not have to be connected if not wanted.
Power Available(Neon/LED Permanently On)
N
Neon/LEDwires
A/P
Switch On Indication(Neon/LED On, Switch On)
N
Neon/LEDwires
A/P
Switch Locator(Neon/LED On, Switch Off)
N
Neon/LEDwires
881M16S/881M16M/881M16L two way switch modules with loop
Power Available(Neon/LED Permanently On)
LOAD
Neon/LEDwires
A/P
N
Switch On Indication(Neon/LED On, Switch On)
LOAD
Neon/LEDwires
A/P
N
Switch Locator(Neon/LED On, Switch Off)
LOAD
Neon/LEDwiresA/P
N
882M10N intermediate switch module
N
Loopwires
A/P
881M16S 882M10N 881M16S
Any number of intermediate switches can be wired between the 2 way switches
LoadLoadLoad
Load
Wiring Diagrams
881M16S master switching for security
N
A/PLamp Lamp Lamp
892A/895A 2 gang integrally switched sockets
Power Available(Neon/LED Permanently On)
Neon/LEDwires
Diagram shows 895AWiring also applies to 892A
Switch On Indication(Socket Live)
Neon/LEDwires
Diagram shows 895A
Neon/LEDwires
Switch On Indication(Socket Live)
Diagram shows 892A
Neon/LEDwires
891A 1 gang vertical socket
Switched Socket(Socket Controlled By Switch)
Switch can be used forcontrolling other load
A/P
Loopwire
E
N
Integrally Switched Socket(Not Controlled By Switch)
A/P
Loopwire
E
N
Load
Wiring Diagrams
896RCD-30
A/P
E
896RCD Socket Outlet Socket Outlet
Diagram shows 892AN
894
Power Available(Neon/LED Permanently On)
Neon/LEDwires
Switch On Indication(Neon/LED On, Switch On)
Neon/LEDwires
RCD protect outlets
1 gang horizontal switched socket
Wiring Diagrams
PDL Industries Australia Pty LtdLocked Bag 5500, Baulkham Hills Business CentreBaulkham Hills NSW 2153 AustraliaFreephone 1300 735 266, Freefax 1300 735 329Telephone +61 29851 2666, Fax: +61 29851 2695www.pdl.com.au
New Zealand Head Office:PO Box 15 355, New Lynn,Waitakere 0640, New ZealandTelephone +64-9-829 0490, Fax +64-9-829 0491www.pdl.co.nz
Electrical ProductsSchneider ElectricIndustrial New Zealand,Telarc Reg. No. 061registered to ISO 9001.
NATIONALACCREDITATIONOF CERTIFICATION
BODIESISO 9001
CERT NO. 11595
QU
ALIT
YASSESSED
PDL Electrical Products aremanufactured by
ISO 9001REGISTERED
800 Modena Wiring leaflet.pdf 22 May 2007 505296 Rev2 CN13505
