INSTALLATION MANUAL

900246

5G MODULAR SHROUD

719.599.3400 www.concealfab.com sales@concealfab.com 10205 Federal Drive, Building B Colorado Springs, CO 80908

March 2019

1

Contents SPECIFICATIONS ....................................................................................................................................... 2

RECOMMENDED TOOLS .......................................................................................................................... 3

SUPPLIED PARTS & HARDWARE .......................................................................................................... 4

ASSEMBLY .................................................................................................................................................. 6

EQUIPMENT CONFIGURATIONS ........................................................................................................... 7

ERICSSON .................................................................................................................................................. 7

2

SPECIFICATIONS

3

RECOMMENDED TOOLS

See kit fasteners (pg. 5).

PHILLIPS

SCREWDRIVER

ADJUSTABLE WRENCH

4

SUPPLIED PARTS & HARDWARE

PARTS

ITEM QTY DESCRIPTION SUPPLIER P/N PKG’D

A 1 5G BRACKET ATTACHMENT 103658

B 2 ANTENNA BRACKET 108604

C 1 REAR RIGHT SHROUD 108620

D 1 REAR LEFT SHROUD 108660

E 1 TOP COVER SHROUD 109130

F 1 FRONT SHROUD 108611

A

D

B

E

C

F

5

PARTS

ITEM QTY DESCRIPTION SUPPLIER P/N PKG’D

1 2 1/4”-20 X 3/4” LG., HEX HEAD CAP SCREW 004610

2 2 1/4” LOCK WASHER 002830

3 2 1/4” FLAT WASHER 000301

4 12 1/4”-20 X 1” LG., 1” O.D. FASTENER ASSY 102105

5 4 .38” I.D., 5/8” LG., UNTHREADED SPACER (BLACK) 102326

6 4 .38” I.D., 3/8” LG., UNTHREADED SPACER (WHITE) 110275

1 2 3

4 5 6

6

ASSEMBLY

Mount Item A to pole at approximate required azimuth with either 2X 3/4” bands or 3X 3/4” lag

bolts. Up to three (3) instances may be installed at same elevation. (Hardware by others)

A

7

EQUIPMENT CONFIGURATIONS

ERICSSON

Install Ericsson Air 5121 to Item B as shown. Ensure usage of Item 5, 5/8” black unthreaded spacer,

for correct spacing from Item B, antenna bracket. Mounting hardware NOT supplied. (By others)

5

B

ERICSSON AIR 5121

8

Install Item B to Item A using hardware provided as shown. During installation, keep antenna and

brackets in slot as far from pole as possible. Slot orientation shown in second image. DO NOT fully

tighten hardware at this time.

B A

B

A

3 2 1

9

Install Items C and D to Item B using hardware provided as shown. When back Items C and D have

been securely fastened, push entire assembly towards pole until slot orientation is like second

image. Hardware from previous step to be fully tightened now.

C

B

1

2

3

D 4

10

Install Item F to Item B using hardware provided as shown.

Slide Item E in place and fasten to Items C and D using hardware provided as shown.

F

4

C D

4

11

ERICSSON AIR 5331

Install Ericsson Air 5121 to Item B as shown. Ensure usage of Item 6, 3/8” white unthreaded spacer,

for correct spacing from Item B, antenna bracket. Mounting hardware NOT supplied. (By others)

6

B

12

Install Item B to Item A using hardware provided as shown. During installation, keep antenna and

brackets in slot as far from pole as possible. Slot orientation shown in second image. DO NOT fully

tighten hardware at this time.

B A

B

A

3 2 1

*Ericsson Air 5121 shown

13

Install Items C and D to Item B using hardware provided as shown. When back Items C and D have

been securely fastened, push entire assembly towards pole until slot orientation is like second

image. Hardware from previous step to be fully tightened now.

C

B

1

2

3

D 4

*Ericsson Air 5121 shown

14

Install Item F to Item B using hardware provided as shown.

Slide Item E in place and fasten to Items C and D using hardware provided as shown.

F

4

C D

4

*Ericsson Air 5121 shown