www.certainteed.com152
Standard RevealEdge PanelsI N S T A L L A T I O N I N S T R U C T I O N S
InstallationGuideThe diagrams contained in
the following pages provide
detailed pictures of recommended
installation procedures for the
systems that are part of the
CertainTeed Ceilings product
offering. Should any portion
of this information provoke a
question or require additional
information, please contact
CertainTeed Ceilings -
Technical Services.
Tel: 1.800.233.8990
Email: [email protected]
Connect Angle trim
Main runner (15/16" or 9/16")installed at 48" centers Hanger, installed
at 48" centers
Connect Shadow-line trim
24" Cross tee(15/16" or 9/16")
48" Cross tee(15/16" or 9/16")
Reveal Edge Panel
Main runner (15/16" or 9/16") installed at 48" centers
48" Cross tee (15/16" or 9/16")
24" Cross tee (15/16" or 9/16")
SIZE IN INCHESQUANTITY SPECIFICATION (EXCLUDES OVERAGE)24" x 48"
0.26 LF/SF
0.5 LF/SF
–
24" x 24"
0.26 LF/SF
0.5 LF/SF
0.26 LF/SF
Optional wall junctions for reveal edge panel
Rabbeted edgewith angle trim
Straight cut withShadow-line trim
Technical Support 1-800-233-8990 153
Module measures of corner
Hanger, installed at 48” centers
Connect 15/16”Cross tee
Connect 15/16”Main runner
Connect 15/16”Main runner
Connect Hook(3 pieces/cornerin corner kit)
Connect 15/16” Main runner withConnect F-trim 0464
Connect 15/16”Cross teeConnect 15/16”
Main runner withConnect F-trim 0464
Connect 15/16”Cross tee
Connect L-coupling (2 pieces/corner in corner kit)
Connect 15/16”Main runner
Connect 15/16”Main runner
Connect Hook (3 pieces/corner in corner kit)
Connect 15/16" Main runner with Connect F-trim 0464
Focus L-line Horizontal Installation External Corner
Focus L-line HorizontalInstallation Internal Corner
Detail of lower part with F-trim Lower part with F-trim
Hanger, installedat 48” centers
Connect 15/16" Cross tee
Hanger, installedat 48" centers
Connect 15/16"Main runner
H=5-5/16"
c=24" centers
Connect 15/16" Main runner withConnect F-trim 0464
Connect 15/16" Cross tee
Edge B without profile
I N S T A L L A T I O N I N S T R U C T I O N S
Ecophon®
Focus™ 3-D L-LineHorizontal Installation
www.certainteed.com154
Ecophon®
Focus™ 3-D L-LineVertical InstallationI N S T A L L A T I O N I N S T R U C T I O N S
Module measures of corner Detail of lower part with F-trim Lower part with F-trim Focus L-line panel
Connect 15/16" Cross tee
Hanger, installed at 48" centers
Connect 15/16" Cross tee
Connect L-coupling (2 pieces/corner in corner kit)
Connect 15/16" Main runner
Connect Hook (3 pieces/corner in corner kit)
Connect 15/16" Main runner with Connect F-trim 0464
Connect 15/16" Cross tee
Connect 15/16" Main runner with
Connect F-trim 0464
Connect 15/16"Cross tee
Connect 15/16" Main runner
Hanger, installed at 48" centers
Connect L-coupling (2 pieces/corner in corner kit)
Connect 15/16" Cross tee
Connect 15/16" Main runner
Connect Hook (3 pieces/corner in corner kit)
Connect 15/16" Main runner with
Connect F-trim 0464
Focus™ L-line Vertical Installation External Corner
Focus™ L-line Vertical Installation Internal Corner
Connect 15/16" Main runner
Edge B withoutprofile
Hanger, installedat 48" centers
Connect 15/16"Cross tee
H=23-1/2" centers
c=6-1/2"Connect 15/16" Main runnerwith Connect F-trim 0464
Connect 15/16"Main runner
I N S T A L L A T I O N I N S T R U C T I O N S
Technical Support 1-800-233-8990 155
I N S T A L L A T I O N I N S T R U C T I O N S
Ecophon®
Focus™ 3-DS-Line E 210
Module measures of corner
Hanger, installed at 48" centers
Connect 15/16" Cross tee
Connect L-coupling (2 pieces/corner in corner kit)
Connect Hook (3 pieces/corner in corner kit)
Connect 15/16"Main runner
Connect 15/16"Main runner
Connect 15/16"Cross tee
Connect 15/16"Main runner
Connect 15/16"Cross tee
Connect 15/16" Crosstee S-line E 210
Connect 15/16"Main runner
Connect L-coupling(2 pieces/corner incorner kit)
Hanger, installed at 48" centers
Connect 15/16" Main runner
Connect Hook (3 pieces/cornerin corner kit)
Connect 15/16"Main runner
Focus™ S-line E 210Installation External Corner
Focus™ S-line E 210 Installation Internal Corner
48"
24"
Fitting of profiles with coupling
Connect 15/16" Cross tee
Connect 15/16" Main runner
Connect 15/16" Cross tee S-line E210, installed at 48" centers
Hanger, installed at48" centers
H=8-3/8"
c=24" centers
Connect 15/16"Main runner
Connect 15/16"Cross tee
Connect 15/16" Cross tee for
Focus™ S-lineE210
www.certainteed.com156
Module measures of corner
Connect 15/16" Main runner
Connect 15/16"Cross tee
Connect L-coupling (2 pieces/corner in corner kit)
Connect 15/16"Main runner
Connect 15/16"Main runner
Connect Hook (3 pieces/corner in corner kit)
Connect 15/16" Main runner withConnect F-trim 0464
Connect 15/16"Cross tee E 300 or
450 Concave
Connect 15/16" Main runner with
Connect F-trim 0464
Connect 15/16"Cross tee
Connect L-coupling (2 pieces/corner in corner kit)
Hanger, installedat 48" centers
Connect 15/16"Main runner
Connect 15/16"Main runnerwith ConnectF-trim 0464
Connect Hook (3 pieces/corner in corner kit)
Connect 15/16" Mainrunner with Connect
F-trim 0464
Focus™ Quadro E 300 and 450 ConcaveInstallation External Corner
Focus™ Quadro E 300 and 450 ConcaveInstallation Internal Corner
Detail of lower part with F-trim Internal corner, upper connectionbetween profiles
Connect 15/16"Main runner
Connect 15/16"Main runner
Connect 15/16" Cross tee
Connect 15/16" Cross teeE 300 or 450 Concave Connect 15/16"
Main runner
H=12" or 16-1/2" centers
c=12" or 16-1/2" centers
Connect 15/16" Main runnerwith Connect F-trim 0464
Connect 15/16" Cross tee
Connect 15/16"Cross tee
Hanger, installed at 48" centers
Ecophon®
Focus™ 3-D Quadro E300 and 450 ConcaveI N S T A L L A T I O N I N S T R U C T I O N S
Technical Support 1-800-233-8990 157
Connect Angle trim
Hanger, installed at 48" centers
Connect Wireclip 0024
Connect Access hatch
Connect T-spline
Connect Splice connector Z
Connect Shadow-line trimConnect Spline
Connect Z-profile 0227,installed at 2' or 4' centers
Connect 15/16" Main runner 8379,L=12', installed at 4' centers
Connection between profiles withwire clip
Splines are used to level tiles Live load/Load bearing capacity Vertical measurements
Connect 15/16" Main runner 8379, L=12', installed at 4' centers
Connect Wire clip 0024
Connect Z-profile 0227, installed at 2' or 4' centers
Connect Splice connector Z
Connect Spline
Connect T-spline
Hanger, installed at 48" centers
Connect Angle trim
Connect Shadow-line trim
24" x 24"
0.27 lft/ft2
0.125/ft2
0.5 lft/ft2
0.04/ft2
0.25/ft2
0.25/ft2
0.065/ft2
as required
as required
SIZE IN INCHESQUANTITY SPECIFICATION (EXCLUDES OVERAGE)
Max live load. Min. load bearing capacityfor suspension components.
Size (inches)Max liveload (lbs.)
Min load bearingcapacity (lbs.)
24" x 24"48" x 48"
11 11
35 35
Min. overall depth of system: 5-5/16"
Min. demounting depth: Individualceiling tiles are non-demountable
I N S T A L L A T I O N I N S T R U C T I O N S
Ecophon® Focus™ CSuspended Application
www.certainteed.com158
Focus™ CRefer to adhesive manufacturer’s printedrecommendation for acoustic ceiling tileadhesive installation pattern.
Focus™ C: ConnectSplines 0209, L=6"
Installation in plasterboardor wood furring
Ecophon® Focus™ CAdhesive ApplicationI N S T A L L A T I O N I N S T R U C T I O N S
Connect Shadow-line trim Connect End Fixing plate
Connect 15/16" Corridor profile,installed at 24" centers
Connect Angle trim
Ecophon® Focus™ DIn CorridorsI N S T A L L A T I O N I N S T R U C T I O N S
Technical Support 1-800-233-8990 159
I N S T A L L A T I O N I N S T R U C T I O N S
Ecophon® Focus™ D2x2, 2x4,
2x5, 2x6, 2x8
Hanger installed on 48" centers(max. distance from wall 24")
Connect Space bar 0520, installed at 48" centers (max. distance from wall 24")
Connect HD Main RunnerInstalled 48" O.C.
Connect Wall bracketT-profile 0524
Ecophon® Focus™ D
Connect HD Main Runner (installed 24" O.C.) - in Lineal Feet
Connect T-profile Wall Bracket
Connect Space Bars (installed 48" O.C. - max. distance from wall = 24") - in Lineal Feet
Connect Space Bar Wall Bracket
Connect Split Pin - (installed through punched slot at every intersection of Space Bar & Main Runner)
Wall Molding - (angle, step or channel)
QUANTITY SPECIFICATION (EXCLUDES OVERAGES)
Connect Wall bracketSpace bar 0525
Connect Split pin 0523,installed one per jointMain runner/Space bar
0.5 x S.F. of Focus D
2 for every row of Main Runners
0.3 x S.F. of Focus D
2 for every row of Space Bars
5 Split Pins per Space Bar
as required
www.certainteed.com160
Ecophon® Focus™ D4" x 4"I N S T A L L A T I O N I N S T R U C T I O N S
Connect Wall bracketT-profile 0524
Connect Edge stiffener 0380
Connect Split pin 0523,installed one per joint
Main runner/Space bar
Ecophon® Focus™ D
Connect HD Main Runner (installed 48" O.C.) - in Lineal Feet
Connect T-profile Wall Bracket
Connect Space Bars (installed 48" O.C. - max. distance from wall = 24") - in Lineal Feet
Connect Space Bar Wall Bracket
Connect Edge Stiffener
Connect Split Pin - (installed through punched slot at every intersection of Space Bar & Main Runner)
Wall Molding - (angle, step or channel)
0.25 x S.F. of Focus D
2 for every row of Main Runners
0.3 x S.F. of Focus D
2 for every row of Space Bars
2 pieces per panel
3 Split Pins per Space Bar
as required
QUANTITY SPECIFICATION (EXCLUDES OVERAGES)
Connect HD Main RunnerInstalled 48" O.C.
Connect Space bar 0520, installed on 48" centers (max. distance from wall 24")
Connect Wall bracketSpace bar 0525
Hanger installed on 48" centers(max. distance from wall 24")
Connect Angle trim 15/22
Technical Support 1-800-233-8990 161
Hanger, installed at 60" centers
Cut edge with Edge clip
Connect Angle trim(fixed at 12" centers)
Connect 15/16" Main runnerHD installed at 24" centers
Cut edge without Edge clip
Connect 15/16" Cross tee, L=24"Connect Support clipDG20 0547
Cutting tool DG 0991 Cut edge without Edge clip/withEdge clip
Hanger, installed at 48" centers
Connect Support ClipDG20
Connect 15/16"Main runner
Connect Angle trim(fixed at 12" centers)
Connect Crosstee, L=48"
Connect 15/16" Mainrunner HD installed at
48" centers
Cut edge without Edge clip Cut edge with Edge clip
I N S T A L L A T I O N I N S T R U C T I O N S
Ecophon®
Focus™ DG XL
www.certainteed.com162
Connect Angle trim, fixedat 12" centers
Connect Anchor screw 4000 (for usein concrete) installed at 24" centersConnect Spline 0209,
L=5-5/16"
Connect Spline 0209
Connect Wall springspacer 0087
Connect Installation screw (foruse with plasterboard and wood)installed at 8" centers
Installation in concrete
Connect Direct fixing plate F 0149(for use in concrete) installed at24" centers
Ecophon®
Focus™ WingI N S T A L L A T I O N I N S T R U C T I O N S
Ecophon® Focus™ FI N S T A L L A T I O N I N S T R U C T I O N S
Focus™ Wing DConnect Space Bar
Focus™ Wing DFocus™ Wing D
Focus™ Wing D
Focus™ Wing D/Ecke linksFocus™ Wing D
/Ecke rechts
Connect HDmain runner
Technical Support 1-800-233-8990 163
Connect Hygiene™ Inspection(not fire resistant)
Hanger, installed at 48" centers
Connect Hygiene™ clip 20, 0172(for 3/4" thickness)
Connect 15/16" Cross tee, L=48"
Connect Channel trim(for 3/4" thickness)
Connect 15/16" Main runnerat 48" centers
Ecophon Hygiene™ Performance A, Protec A, Advance A
Connect 15/16" Cross tee, L=48"
Connect 15/16" Cross tee, L=24"
Connect Hygiene™ Inspection (not fire resistant)
Connect Hygiene™ clip 20, 0172 (for 3/4" thickness)
Connect Channel trim C3 3532 (for 3/4" thickness)
Hygiene Advance perimeter panel
Connect Hygiene Sealant 0041
SIZE IN INCHESQUANTITY SPECIFICATION (EXCLUDES OVERAGE)24" x 48"
0,27 lft/ft2
0,5 lft/ft2
-
as required
0,65/ft2
as required
as required
as required
24" x 24"
0,27 lft/ft2
0,5 lft/ft2
0,27 lft/ft2
as required
1/ft2
as required
as required
as required
Arrangement of clips
Connect 15/16" Cross tee, L=24"
Clips for keeping tiles in position Live load/Load bearing capacity Vertical measurements
Min. overall depth of system: 6"
Min. demounting depth: 6"
Max live load. Min. load bearing capacityfor suspension components.
Size (inches)Max liveload (lbs.)
Min load bearingcapacity (lbs.)
24" x 24"24" x 48"24" x 60"24" x 72"24" x 96"
11 11 11 11 11
35 35 35 35 35
Live load/Load bearing capacity
Max live load. Min. load bearing capacityfor suspension components.
Size (inches)Max liveload (lbs.)
Min load bearingcapacity (lbs.)
24" x 24"24" x 48"
99
35 35
I N S T A L L A T I O N I N S T R U C T I O N S
Ecophon® Hygiene™
Performance A, Protec A, Advance A
www.certainteed.com164
Connect 15/16" Main runner C39101,installed at 48" centers Connect Baffle clip 0201
Connect 15/16" Cross tee C39105, L=48",installed at 54" centers
Installation in checkered pattern
48"
54"
Detail of suspension
I N S T A L L A T I O N I N S T R U C T I O N S
Ecophon® Hygiene™
Protec/Advance Bafflein Checkered Pattern
Technical Support 1-800-233-8990 165
Connect 15/16" Main runner,installed at 24" centers Connect Baffle clip 0201
Connect 15/16" Cross tee, L=24",installed at 72" centers
Installation in rows
24" 24"
Detail of suspension
I N S T A L L A T I O N I N S T R U C T I O N S
Ecophon® Hygiene™
Protec/AdvanceBaffle In Rows
www.certainteed.com166
Connect Wall fixing plate 1111 lower
Connect Wall fixing plate 1110 upper
Detail of upper fixing Detail of lower fixing
Connect Wall fixing plate 1111 lower
Connect Wall fixing plate 1110 upper
1800 x 1200
1 pc/Baffle
1 pc/Baffle
SIZE IN MMQUANTITY SPECIFICATION (EXCLUDES OVERAGE)
I N S T A L L A T I O N I N S T R U C T I O N S
Ecophon® Hygiene™
Protec Wall Baffle
Technical Support 1-800-233-8990 167
Connect 15/16" Main runner,installed at 48" centers
Connect Angle trim
Connect 15/16"Cross tee, L=48"
Connect Shadow-line trim Connect 15/16"Cross tee, L=24"
12 Master Extra Bass 48" x 24" x 4"
Connect 15/16" Main runner,installed at 48" centers
Connect Angle trim
Connect Shadow-line trim
Connect 15/16" Cross tee, L=24" Connect 15/16"Cross tee, L=48"
Optional wall junctions for Master™ E
Rabbeted withAngle trim
Rabbeted withShadow-line trim
Straight cut withShadow-line trim
I N S T A L L A T I O N I N S T R U C T I O N S
Ecophon®
Master™ A, E
www.certainteed.com168
Rigid hanger made of Connect Angletrim, max. L=48” at 48” centers
Connect Impact bracing
Connect Channel trim 0261
Connect 15/16”Cross tee, L=24”
Ecophon Super G™ A
Connect 15/16" Main runner, installed at 24" centers
Connect 15/16" Cross tee, L=24"
Rigid hanger made of Connect Angle trim, max. L=48" at 48" centers
Connect Impact bracing
SIZE IN INCHESQUANTITY SPECIFICATION (EXCLUDES OVERAGE)24" x 48"
0,5 lft/ft2
0,25 lft/ft2
0,13/ft2
(3/panel)
24" x 24"
0,5 lft/ft2
0,5 lft/ft2
0,13/ft2
(2/panel)
Connect 15/16” Main runner,installed at 24” centers
Detail of suspension Connection between profiles withsplit pin
Live load/Load bearing capacity Vertical measurements
Min. overall depth of system: 8"
Min. demounting depth: 8" (for tile withoutImpact bracing)
Max live load. Min. load bearing capacityfor suspension components.
Size (inches)Max liveload (lbs.)
Min load bearingcapacity (lbs.)
24" x 24"24" x 48"24" x 60"24" x 72"24" x 96"
11 11 11 11 11
35 35 35 35 35
Live load/Load bearing capacity
Max live load. Min. load bearing capacityfor suspension components.
Size (inches)Max liveload (lbs.)
Min load bearingcapacity (lbs.)
24" x 24"24" x 48"
99
35 35
I N S T A L L A T I O N I N S T R U C T I O N S
Ecophon® Super G™
With Impact Bracing