1
Subject to technical alterations! MC Installation Variants of Nozzle Lances 10.30 MC nozzle lances are designed to allow for the sliding nozzle lances to be taken out of the sleeves or clamp sleeves without having to dismantle the flanges. Illu. 1 Illu. 3 Illu. 2 Nozzle lance with flange at choice, standard 120 mm Ø Nozzle lance with sliding sleeve and flange at choice, standard 120 mm Ø Nozzle lance with sliding sleeve and head thread, on request Illu. 6 Illu. 5 Illu. 4 Nozzle lance with camloc fastener, fixed or with combined sliding sleeve Nozzle lance with sold clamp and clamping nipples, fixed or with sliding sleeve Nozzle lance with collet and sealing for pressure containers, slidable Illu. 8 Illu. 7 Nozzle lance with screw connection, fixed or slidable DIN 11851 and DIN 11864-1 Nozzle lance with integrated height adjustment by means of a clampable adjusting disk, compatible with systems on the market Illu. 9 Nozzle lance, clamping and height adjustment via a clamping ring screw connection, with head thread, sui- table for ZL 3/8“ and ZL 1/2“ lance-Ø
![Cement and Concrete Research - ETH Z · have been variants of contour crafting (see [38] and references therein), whereby a large-scale robotic device leads a nozzle through space](https://static.documents.pub/doc/80x56/5f0b55f77e708231d43002a4/cement-and-concrete-research-eth-z-have-been-variants-of-contour-crafting-see.jpg)
