INSTANT MEASUREMENTDIMENSIONAL MEASUREMENT IN A NEW LIGHT

IM-6225 Series Wide-field/Programmable ring-illumination model

Image Dimension Measurement System

MEASUREMENTS

REWRITING THE BOOK ON DIMENSIONAL

Image Dimension Measurement System

Optical comparator Measuring microscope GD&T and profile measurement system

Hand caliper/ micrometer

Optical CMM

Programmable ring-illumination unit

2

4 Why use the IM Series?

6 Measurement time

8 Error elimination

10 Easy operation

12 Data management

14 Precise optics

16 Programmablering-illumination unit

18 High-precision stage

20 Software

22 Contact height measurement unit

23 Measurement support tools

24 Performance and reliability

25 Application examples

26 Applications

28 Global support

30 System configuration

31 Specifications

INDEX

3

COMMON PROBLEMS WITH

DIMENSIONAL MEASUREMENTS

Measurements take a long time❙ Fiddling with jigs for part placement and datum setup is time consuming

❙ Parts requiring custom jigs introduce additional time and component costs

❙ An increase in measurements and parts can mean an exponential increase in required time

SLOW

Varying measurement results depending on the operator❙ Changes in focus due to setup by different operators results in inconsistent measurements

❙ Variation in lighting setup between stations affect the measurement

❙ Measurements rely heavily on operator judgement and experience

INCONSISTENT

Limited number of people can operate the device❙ Learning how to operate the measuring instrument takes time

❙ Features requiring virtual lines or points add a layer of complexity

❙ Operator error easily occurs in the measurements of items such as rounded parts and curved surfaces

COMPLICATED

RESTRICTEDComplicated data management❙ Requires a PC or other device to perform separate management of measurement results

❙ May not readily provide data formats such as process capability and trend graphs

❙ Can be tedious when attempting to compile inspection documentation

4

Measurements performed in seconds❙ Automatic recognition of position and origin

❙ Perform hundreds of measurements with a single press

❙ Easily perform over 100 measurements simultaneously

FAST

Uniform measurement results regardless of the operator❙ Automated focus adjustment every time

❙ Automated lighting settings every time

❙ Automated routine applied every time

CONSISTENT

Intuitive interface that anyone can use❙ Easily set up measurements with just a few clicks

❙ Virtual elements such as center lines are automatically extracted

❙ Dedicated tools make it easy to inspect any shape

EASY

FLEXIBLEEasy data management❙ Measurement results are automatically recorded

❙ Get immediate feedback on trends and variations

❙ Complete inspection reports in seconds

WITH THE

IM SERIES

5

PlaceSTEP 1

a target

PressSTEP 2

the button

6

MEASUREMENTS PERFORMED IN SECONDS

DRASTICALLY REDUCED MEASUREMENT T IME

Automatic recognition of position and orientationThe location and orientation of the target placed on the measurement stage are automatically detected. By finding the part and comparing against the recorded shape, it is possible to perform accurate measurements without the need for precise positioning of the part.

Multiple measurement points specified with a diagram

Judgements can be made at a glance thanks to the OK/NG display.

TARGETS CAN BE MEASURED

NO MATTER WHERE THEY ARE PLACED

WITHIN THE FIELD OF VIEW

Hundreds of measurements with a single button press

Measurement results can also be viewed just by clicking with a mouse.

Measurement of up to 99 points with a single button pressHundreds of measurements can be easily performed on a part with just one press of the button.Even if the number of measurement points is increased, the measurement time remains the same.

Easily perform over 100 measurements simultaneouslyThe dimensions of all targets on the stage are measured simultaneously.There is no need to measure each target individually.

7

62.250 mm

62.250 mm

62.250 mm

62.250 mm

62.250 mm62.250 mm

62.250 mm

8

Automatic identification of burrs and chips

Burrs and chips found in the detection area are automatically recognized and excluded from the fitting processing as abnormal locations. It is also possible to set the system to interrupt measurement when burrs or chips are found.

Shape processing

Lines and circles are extracted using a least squares fitting of 100 or more points.*

*There may be less than 100 points dependingon the shape.

Sub-pixel processing

By splitting each pixel into 100 or more sub-pixels, the IM Series is able to provide a wide field-of-view while maintaining its high-precision measurement capability.

Without sub-pixel processingThe target is measured by one pixel of the light receiving element.

One pixel is divided into 100 or more squares

With sub-pixel processingThe target is measured by one hundredth or less of a pixel of the light receiving element.

RECORD THE LIGHTING SETTINGS

Even when the target is out of focus due to height differences ... The focus is automatically adjusted for measurement.

SAVEMEASUREMENTS CAN BE PERFORMED USING THE SAME SETTINGS

Automatic focus adjustment with the auto-focus function

Only the upper image is in focus.

Only the lower image is in focus.

One pixel of the light receiving element

Automatic detection of approximately 100 points

Burrs and chips are recognized automatically.

Automated focus adjustmentThe IM Series is equipped with a specifically designed optical lens with a large depth of field. It is also equipped with an auto-focus function that automatically brings measurement points into focus. This is useful for targets with uneven surfaces for which all the measurement points cannot be brought into focus at the same time.

Automated lighting settings The IM Series automatically epitomises and saves the lighting conditions so anyone can easily take accurate, consistent measurements.

Automatic edge detection

UNIFORM MEASUREMENT RESULTS REGARDLESS OF THE OPERATOR

EL IMINATING OPERATOR ERROR

9

CL ICK1

Easy operationsperformed with a few clicks

10

Select the tool from the menu, and define the general feature location with a few clicks of the mouse.

Measurements using virtual centre lines can also be set easily.

Intuitivesettings

Measurements can be performed easily with just a few clicks.and select the measurement condition check boxes.

Just place the target on the stage ...

Easily set up measurements with just a few clicks

Just select the desired tool from the menu and use the mouse to define a general search region. The tool will then automatically find and snap to the edge.

INTUITIVE INTERFACE THAT ANYONE CAN USE

CONFIGURING SETTINGS WITH THE CL ICK OF A MOUSE

Easily create virtual figures

Features such as centre lines and virtual lines can also be created just with the click of a mouse. The IM Series will automatically find any necessary features and perform any calculations to ensure accurate feature placement every time.

11

Automatic measurement function eliminates need for setup This function brings new meaning to Place and Press inspection. Simple dimensions can be measured without any prior setup by simply selecting the types of measurements expected. This makes it possible for even the most novice users to start taking fast, accurate measurements.

12

Critical statistical values required for inspection reports are provided by default.

The trend graph shows tendencies of a product at a quick glance.

Histogram settings can be adjusted as required.

Easy inspection recording and report preparation in one simple package.

Measurement results are automatically recordedAll measurement results and critical identifiers are automatically recorded to simplify data management. The IM Series then automatically calculates and displays critical statistical values such as average, σ, 3σ, 6σ, and Cpk.

Get immediate feedback on trends and variationsBuilt-in trend graph and histogram functions allow on site analysis of production trends and variations. Instant feedback lets you stay ahead of your process to prevent quality problems before they start.

Complete inspection reports in secondsComplete inspection and analysis reports can be generated at the click of a button. Print reports directly from the IM Series or easily export data in a convenient CSV format for additional processing.

FLEXIBLE DATA MANAGEMENTTHIS SINGLE SYSTEM COVERS EVERYTHING FROM DATA MANAGEMENT TO ANALYSIS

13

14

Accurate measurements can be performed even for targets with uneven surfaces.

Accurate measurements cannot be performed due to height differences between different parts of the target.

Zoom lens

PRECISE OPTICS

The image is in focus regardless of height differences.

The image minimizes distortion throughout the field of view.

The image is out of focus due to height differences.

The area along the outer edge is shown distorted.

Zoom lens

Zoom lens

TECHNOLOGIES FOR ACHIEVING PLACE-AND-PRESS MEASUREMENT

Clear focus regardless of height differencesThe IM Series is equipped with a specially designed lens with a large depth of field to ensure accurate measurements despite height differences on the part.

Apparent feature size not affected by height differencesThe IM Series is equipped with a telecentric lens, which means that the image size is not affected by the height differences between different parts of the target. This enables accurate measurements of targets with uneven surfaces.

The IM Series is equipped with a low distortion lens designed to not only minimize distortion near the centre, but also at the outer reaches of the field of view. This allows parts to be measured accurately despite placement on the stage.

Less distortion throughout the entire field of view

15

16

Optimum lighting search function

It is often difficult to determine the correct lighting settings for a given feature. The optimal lighting search function simplifies this by showing you the actual images using different lighting techniques so you can simply select the one you want.

Select the feature to optimise. Select the settings from the automatically captured results.

Measurements can be performed easily with the optimum settings.

A contrast forms between the target and the edge of its outer circumference.

Light strikes all parts of the target in a uniform manner.

MULTI-ANGLE ILLUMINATION, HIGH

Contrasts form between the different height elevations of the target.

MULTI-ANGLE ILLUMINATION, LOW SLIT RING ILLUMINATION

Programmable ring-illumination unit

PROGRAMMABLE RING-ILLUMINATION UNIT

Multiple illumination units all in one The programmable ring-illumination unit integrates multiple ring illumination functions into a single unit. This allows a wide variety of features to be inspected without the need for lighting changeover to maximize efficiency.

Automatically find the optimal lighting settings

TECHNOLOGIES FOR ACHIEVING PLACE-AND-PRESS MEASUREMENT

17

18

TECHNOLOGIES FOR ACHIEVING PLACE-AND-PRESS MEASUREMENT

ø100 × 200 mm field of viewA newly developed high-precision stage enables multiple images to be combined. You can measure a large target even when it is not contained in the same field of view.

HIGH-PRECISION STAGE

A wide range can be measured by moving the stage

High-precision stage with high linearityBy utilizing precision cross-roller bearings, we are able to offer high accuracy while maintaining increased durability. This eliminates measurement errors due to stage movement.

Without adjustment

STAGE MOVEMENT

Turning force applied

Actual dimension

Measured dimensionRange of FOV

STAGE MOVEMENT

High linearityRange of FOV

Smaller difference between actual and measured dimensions

Custom high-precision linear scaleA high-precision linear scale designed specifically for the IM Series allows the stage movement to be tracked in micron increments. This makes it possible to perform accurate measurements, even on large parts.

Linear scale module

19

SOFTWARE FURTHER IMPROVES IM SERIES USABILITY

CAD DATA USAGE, NETWORK FUNCTION, ETC.

Optional: IM-H1C Optional: IM-H1EE

Measurement settings

CAD import module Measurement setup editor

IMPORT CAD DATA CONFIGURING SETTINGS FROM A PC

The data required for measurements can be acquired from CAD drawing data in DXF format. Even when a target is not at hand, it is still possible to quickly create measurement setting files.

Programs can be easily created and modified from your desk with the measurement setup editor. Programming from your desk allows the IM to be used for measuring without interruption.

CAD import module*Measurement setup editor (IM-H1EE) is also required.

Measurement setting data

20

Optional: IM-H1T

Data transfer over a LAN connection Data transfer software

Statistics/analysis viewer

COMMUNICATING WITH PCs CUSTOMIZING INSPECTION RECORDS

A LAN connection can be used to easily synchronize settings files and measurement data to a PC, other IM’s, or even units at remote locations.

Measurement results can be automatically sent to Microsoft® Excel in a user-defined, custom format.

Easily view results, analyse trends, and generate inspection reports from any PC with the statistics/analysis viewer.

Internal LAN

Measurement data

Certificate file

Measurement data

Certificate file

PC server

Remote factory

Connection methodd Output format

LAN CSV File, HTML, QDAS Format

RS-232C ASCII Format

LAN connection

21

CONTACT HEIGHT MEASUREMENT UNIT IM-6225T

Place-and-press measurement system

This contact height measurement unit reduces the time spent using separate measuring instruments for different measurement points and the effort spent in recording measurement results. The pattern search function can be used to automatically recognize and measure the height (depth) measurement points specified in advance. This function greatly reduces the time spent performing tasks related to measurement, such as the creation of operating procedures and the training of operators. In addition, strengthening measurement results can lead to improvements in the overall efficiency of measurement work.

Standard probe position Wide-range probe position

Standard probe Wide-range probe

Measuring force 0.3 N

Measurable area

(XY)

Wide field 45 × 95 mm 95 × 95 mm

High precision 7.5 × 25 mm 60 × 25 mm

Repetition accuracy ±2.0 μm ±5.0 μm

SPECIFICATIONS

The probe performs automatic measurements. The height measurement result is displayed.Just place the target on the stage and press the button.

STANDARD WIDE-RANGE

22

MEASUREMENT SUPPORT TOOLSINCREASING MEASUREMENT STABI L ITY

Optional: OP-87501Optional: OP-87761 (for long objects)

Precision fixturing base(for long measurement targets)

OP-87761Precision fixturing base

OP-87501

Plastic moulding (ring illumination) Plastic moulding (coaxial illumination)

Precision fixturing base

Use these jigs to secure the target in place. These options are useful when measuring targets such as those that sit at an angle when placed on the measurement stage.

EXTERNAL ILLUMINATIONPERIPHERAL EQUIPMENT

Optional: IM-DXW12Coaxial illumination

This dedicated coaxial illumination unit has been designed to match the stage movement function of the wide-field and programmable ring-illumination model. The coaxial light is effective when attempting to measure features on glossy targets.

23

PERFORMANCE AND RELIABILITYFOR F IELD USE

Traceability system diagram

The reference scales used for manufacturing, inspection, and calibration conform to the reference scale of JCSS accredited calibration laboratories to establish traceability back to the national standard.

International standard

Common standard

JCSS accredited calibration laboratory

Measuring instrument to be calibrated

Secondary standard

National Metrology Institute of Japan (NMIJ) of National Institute of Advanced Industrial Science and Technology

Reference scale

Reference scale

IM Series image dimension measurement system

Precision coordinate measuring instrument

Highly rigid body and temperature sensor ensures practical installation anywhere

The highly rigid body and built-in temperature sensor have enabled installation anywhere. Deformation is limited as to not affect measurement and temperature compensation ensures accurate measurement in the field.

Temperature sensor ensures more stable measurement.Frame strength analysis diagram

Built-in temperature sensor

Space-saving design small footprint

In addition to the compact body, the built-in monitor saves significant space, allowing the IM Series to be installed anywhere. These important features allow you to take your lab to the production line for immediate part feedback.

Projector Measuring microscopeIM Series

Small footprint

24

IM SERIES APPLICATION EXAMPLESVARIOUS PROCESSING METHODS

LATHE PROCESSING AND CUTTING

Base plate

PRESSING

Camera part

Shaft

Connector

RESIN MOLDING SINTERING

Cutting tool

COLD FORGING

Gear

Spring

OTHER PROCESSING

Screw Printing Moulded object (profile tolerance)

25

HIGHER PRODUCTIVITY AND RELIABILITY THROUGH THE INSTALLATION OF THE IM SERIES

VARIOUS APPL ICATIONS FROM ACCEPTANCE INSPECTIONS TO SHIPPING INSPECTIONS

PRECISE QUALITY INSPECTIONS IN LABORATORIES

2IN-PROCESS INSPECTIONS1

Improved reliability leads to your customers trust and continued business.

Shortened inspection time leads to an increase in the number of products made.

Processed product A Inspection Processed product

B

Processed product A

Processed product B

Processed product

C

Inspection Inspection

PRODUCTIVITY IMPROVEMENT RELIABILITY IMPROVEMENT

MEASUREMENT SPEED

• Spend less time taking measurement and more time optimizing your process.

EASY SETUP

• Give everyone the capability to perform accurate inspections.

EASY DATA MANAGEMENT

• Utilize automatic data recording to optimise your quality control system.

• Eliminate the risk of being caught without proper inspection reports.

MEASUREMENT ACCURACY

• Quality can be guaranteed with uniform standards.• Accuracy can be guaranteed by way of the calibration certificate.

26

PRE-SHIPPING INSPECTIONS3

Reduce inspection time and free up personnel to improve your process.

REDUCED LABOUR COSTS

INCOMING INSPECTIONS4

MEASUREMENT ACCURACY

• When handling incoming inspection of a variety of parts, the IM Series eliminates variations between operators and provides uniform standards.

Defective products do not enter into later processes.

OK

NG

YIELD IMPROVEMENT

MEASUREMENT SPEED

• Inspect more parts without spending more time.• Inspect parts you previously didn't have time for.

EASY SETUP

• Inspection time can be shortened.• The time spent training inspectors can be reduced.

EASY DATA MANAGEMENT

• The time and effort spent creating inspection records can be reduced.

• The time and effort spent aggregating information and creating databases can be reduced.

27

Taiwan

China & Hong Kong

Vietnam

Indonesia

Malaysia

Singapore

India

Thailand

Korea

Japan

U.S.A.

Canada

Mexico

Europe

Philippines

France

Switzerland

Italy

Slovenia

AustriaHungary

Belgium

Netherlands

Germany

Czech Republic Poland

Slovakia

Romania

UK & Ireland

Austria Belgium Canada

China & Hong Kong Czech Republic France

Germany Hungary India

Indonesia Italy Japan

Korea Malaysia Mexico

Netherlands Poland Romania

Singapore Slovakia Slovenia

Switzerland Taiwan Thailand

U.S.A. UK & Ireland Vietnam

GLOBAL SUPPORT SYSTEMCOMPREHENSIVE COVERAGE ALL OVER THE WORLD

28

Quality support only possible with a direct sales system

Our comprehensive after-sales support through technical sales representatives can only be achieved by our direct sales system.  You can be confident that you will get the support you want immediately, without the hassle and delay of dealing with reps or distributors.

GENERAL MANUFACTURER

KEYENCE

Customer KEYENCE

DIRECT SALES

Customer Vendor Agent Manufacturer

SUPPORTED LANGUAGES

Chinese (simplified) Chinese (traditional) English

French German Italian

Japanese Korean Spanish

Thai

Support in various languages

Not only operation screens on the main unit but also other materials such as the instruction manual are available in various languages. After introduction into overseas production sites, local staff can also use this system smoothly.

Instant delivery system even for overseas

A wide variety of products are stocked at distribution sites in each country so that they can be delivered promptly on the day we receive your order. You do not need to worry about if it may take considerable effort and time to obtain a product from an overseas factory.

29

PRECISION FIXTURING BASE

STYLUS

STAGE GLASS

Dedicated cable

Mouse (included) Controller

IM-6700Keyboard(included)

Measurement HeadIM-6225

IM stylus*2

(for IM-6225T)(optional)

IM flat stylus (for IM-6225T)

(optional)

OP-87979 OP-88019

Offset table(optional)

OP-87965

586

316243 490*3

SYSTEM CONFIGURATIONCONNECTIONS TO DIVERSE MACHINES POSSIBLE

Statistics/analysis viewer(included)

IM-H11VMeasurement setup editor

(optional)

IM-H1EE

CAD import module(optional)

IM-H1CData transfer software

(optional)

IM-H1T

586

490284243 *3

174 322

343.3

Supported operating systems

Windows Vista® Ultimate/Business/Home Premium/Home Basic SP2 or later (32-bit version),Windows®7 Ultimate/Professional/ Home Premium (32/64-bit version),Windows®8.1/8.1 Pro (32/64-bit version),preinstalled version

HDD free space 2 GB or more

LAN port DVI connector USB port

External monitor (not included)

PC (not included) Printer (not included)

Head IM-6225 Controller IM-6700

*1. One instance of this product is included with the IM-6125, IM-6225 and IM-6225T. *2. One instance of this product is included with the IM-6225T. *3. 343 when the stage is moved to its maximum position.

Scanning coaxial illumination(optional)

IM-DXW12IM illumination bracket

(for IM-DXW12)(optional)

OP-87868

OPTIONAL ILLUMINATION

Precision fixturing base for long measurement targets

(optional)

OP-87761Precision fixturing base

(optional)

OP-87501

Stage glass (optional)*1

OP-87677Sapphire glass

(optional)

OP-87678Sapphire glass(for IM-6225T)

(optional)

OP-87981Offset stage(optional)

OP-87679

DIMENSIONS

Unit : mm

Scanning coaxial illumination

(for IM-6225T) (optional)

IM-DXW12T

Head IM-6225T

30

Measurement points 99 points max. (99 × 9 points possible when the function for consolidating measurement settings is used)

Pattern search (profile tracking function) XYθ (with 360° rotary position compensation)

Pattern registration 1000 patterns or more*9

Measurement time 2 seconds*10

Basic measurement function

Distance measurement 8 types (point-point/line-point/line-line/circle-point/circle-line/circle-circle/circle/arc)

Angle measurement Provided

Calculation Provided

Height*5 Provided

Virtual line function

Point Middle point/intersection

Conjunction edge Line conjunction/circular conjunction

Line 6 types (midline/perpendicular line/parallel lines/tangent line/line passing through a point/approximate line)

Circle Middle circle/approximate circle/auxiliary circle/inscribed and circumscribed circle

Application tool

Pitch measurement Line/circumference

Pitch angle Line/circumference

Width measurement Edge width

Thickness measurement Thickness measurement/gap measurement between inner and outer diameters

Special tool Rounded corner/curved surface/oval/reticle/point position/perimeter/area/screw/automatic measurement

GD&T

Shape tolerance Straightness/circularity/profile

Orientation tolerance Squareness/parallelism

Position tolerance Point position/concentricity

Element tool

Point Point (on a line or arc)/maximum and minimum (rectangle, circle, arc)

Line Line/centre line/peak line

Circle Circle/arc/peak circle/peak arc

Profile extraction Provided

Special tool Automatic generation/gauge line

Height*5 Provided

Manual measurement Provided

Coordinate system configuration Provided

Batch configuration of tolerance Provided

Element list editing Provided

Measurement setting data binding function Provided

DXF export function Provided

Automatic measurement function Provided

Q-DAS data save function Provided

Measurement settings support functions*11 Provided

*9. Depending on the measurement setting data and number of data pieces being stored*10. Without pattern search, applied measurement, and stage movement *11. Optimum lighting guide, optimum lighting search, automatic edge extraction parameter adjustment function, and multiple edge extraction function

SPECIF ICATIONS

ModelController IM-6700

Head IM-6225

Wide field High precision

Image pickup device 1" 6.6 mega pixel monochrome CMOS

Display10. 4" LCD monitor (XGA: 1024 × 768)

External monitor connectable (clone output)

Light receiving lens Double telecentric lens

Image measurement

Field of view ø100 × L200 mm 25 × L125 mm

Minimum display unit 0.1 μm

Repetition accuracyW/o stage movement ±1 μm ±0. 5 μm

With stage movement ±2 μm ±1. 5 μm

Measurement accuracy (2σ)W/o binding ±5 μm*1 ±2 μm*2

With binding ±(7 + 0. 02 L) μm*3 ±(4 + 0. 02 L) μm*4

Height measurement*5

Measurement range 0 to 60 mm

Measuring force 0.3 N

Measurement position accuracy (XY) ±0.7 mm

Minimum display unit 1 μm

Measurable area (XY)Standard probe 45 × 95 mm 7.5 × 25 mm

Wide-range probe 95 × 95 mm 60 × 25 mm

Repetition accuracy*6Standard probe ±2 μm

Wide-range probe ±5 μm

Measurement accuracy*7Standard probe ±7.5 μm

Wide-range probe ±15 μm

External remote input Non-voltage input (with and without contact)

External output OK/NG/FAIL Relay output/rated load: 24 VDC, 0. 5 A/ON resistance

InterfaceLAN RJ-45 (10BASE-T/100BASE-TX/1000BASE-T)

USB 2.0 series A 6 ports (front: 2, rear: 4)

Record Hard disk drive 250 GB

Resistance to environmentOperating ambient temperature +10°C to 35°C

Operating ambient humidity 20% RH to 80% RH (no condensation)

Illumination system

Transparent Telecentric transparent illumination

RingFour division, multi-angle illumination (electric)

Slit ring (directivity) illumination (electric)

X stage Moving range 100 mm (electric)

Z stageMoving range 30 mm (electric)

Withstand load 2 kg

Power supplyVoltage 100 to 240 VAC 50/60 Hz

Power consumption 310 VA max.

WeightController Approx. 8 kg

Head*8 Approx. 31 kg

*1. In the range of ø80 mm from the centre of the stage within the operating ambient temperature range of +23°C ±1.0°C at the focused focal point position*2. In the range of ø20 mm from the centre of the stage within the operating ambient temperature range of +23°C ±1.0°C at the focused focal point position*3. In the range of ø80 × 180 mm from the centre of the stage, within the operating ambient temperature range of +23°C ±1.0°C at the focused focal point position, and with a load weighing 1 kg or less on the stage (L = amount of stage movement in mm units)*4. In the range of ø20 × 120 mm from the centre of the stage, within the operating ambient temperature range of +23°C ±1.0°C at the focused focal point position, and with a load weighing 1 kg or less on the stage (L = amount of stage movement in mm units)*5. Only for heads with the contact height measurement unit (IM-6225T)*6. When the maximum measurement height is set to 30 mm or less; ±3 μm for the standard probe and ±6 μm for the wide-range probe when the maximum measurement height is greater than 30 mm and less than or equal to 60 mm*7. When the maximum measurement height is set to 30 mm or less; ±12 μm for the standard probe and ±21 μm for the wide-range probe when the maximum measurement height is greater than 30 mm and less than or equal to 60 mm*8. Approx. 34 kg for heads with the contact height measurement unit (IM-6225T)

31

• Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

Field of view: ø100 mm

A dimension measurement system born from a new concept which eliminates the need for X-Y stages. With a built-in ø100 optical lens, this model enables all points in the entire field of view to be measured in a batch.

GENERAL- PURPOSE MODEL

Just place and press General-purpose type image dimension measurement system

Repetition accuracy: ±0.1 μm

An innovative stage designed for reducing measurement time achieves place-and-press measurement even for micro machined parts. Perform hundreds of measurements in seconds without worrying about target placement and focus.

HIGH - PRECISION MODEL

Just place and press even for micro machined partsHigh-precision type image dimension measurement system

Field of view: 200 mm

Achieves twice as wide a field of view as conventional systems so that large targets can be measured.Just place and press to complete measurement easily and accurately.

WIDE- FIELD MODEL

Wide-field model of the image dimension measurement system that enables place-and-press measurement with a 200 mm field of view with basic illumination features

Field of view: 200 mm

This model is equipped with an adjustable illumination unit that integrates multiple ring illumination functions into a single unit. The optimal illumination conditions can be reproduced, which enables even stable illuminated measurement.

WIDE- FIELD + ADJUSTABLE I L LUMINATION MODEL

Wide-field and adjustable illumination model of the image dimension measurement system that enables illuminated place-and-press measurement

IM-6015/6025

IM-6145

IM-6125

IM-6225

IM6225T-WW-C-GB 1027-5 600G18 Copyright (c) 2015 KEYENCE CORPORATION. All rights reserved.

www.keyence.com