INSTITUTION OF ELECTRONICS AND TELECOMMUNICATION ENGINEERS- SFIT Chapter (IETE-SFIT) The IETE student Chapter at SFIT started in 2008. The objectives of this student forum are as follows: 1. To keep the students updated with technological developments in the field of Electronics & Telecommunication 2. To provide them a platform to develop their technical and managerial skills by organizing various technical events such as seminars, workshops, project competitions and technical paper presentations to name a few. At present there are 28 active members in this chapter. Mr. Inderkumar Kochar and Mr. Sandip Dhende, Assistant Professors in EXTC department, are the coordinators for this chapter. The endeavor of IETE-SFIT student Chapter is to spread awareness about the state-of-the-art technologies used in industries and develop all-round skills of engineers keeping in mind the interest of students. Current IETE Committee with conveners
Transcript
INSTITUTION OF ELECTRONICS AND TELECOMMUNICATION ENGINEERS-
SFIT Chapter (IETE-SFIT)
The IETE student Chapter at SFIT started in 2008. The objectives of this student forum are as
follows:
1. To keep the students updated with technological developments in the field of Electronics
& Telecommunication
2. To provide them a platform to develop their technical and managerial skills by organizing
various technical events such as seminars, workshops, project competitions and technical
paper presentations to name a few.
At present there are 28 active members in this chapter. Mr. Inderkumar Kochar and Mr. Sandip
Dhende, Assistant Professors in EXTC department, are the coordinators for this chapter. The
endeavor of IETE-SFIT student Chapter is to spread awareness about the state-of-the-art
technologies used in industries and develop all-round skills of engineers keeping in mind the
interest of students.
Current IETE Committee with conveners
The list of members in IETE student forum council for the academic year 2019-20 is as follows:
Post Head Executives
Chairman Karthik Manthitta
(TE EXTC B)
Secretary Kartik Naik
(TE EXTC B)
Treasurer Navin Nadar
(TE EXTC A)
Technical Sejal Lanjekar
(TE EXTC A)
Hitarthi Mokashi (TE EXTC B)
Shubham Naik (TE EXTC B)
Mahek Desai (SE EXTC A)
Creative Aditya Nayak
(TE EXTC B)
Matish Bangera(SE EXTC A)
Muthulaxmi Nadar (TE EXTC B)
Saurabh Mangalvedhekar (TE EXTC B)
Membership and
Marketing
Aditya Kolte
(TE EXTC A)
Aarthi Murali (SE EXTC A)
Shreya Kini (SE EXTC A)
Moksha Mehta (TE EXTC)
Public Relations Shrutee Khot
(TE EXTC A)
Neha Bhujbal (TE EXTC A)
Prapti Kotian (SE EXTC A)
Joshua Mendes (TE EXTC A)
EVENTS ORGANIZED/PLANNED IN 2019-20
On 31st August 2019 as part of MOSAIC, an event named GLOWCRIKZZ was organized. It was
based on two overs inbox cricket match accompanied with basic programming based quizzes. In
all, 64 students participated in the same.
Winners
Runner-ups
In the even semester, workshops on Latex and Computer Networking have been planned.
EVENT ORGANIZED IN 2018-19
In 2018, the following events were organized as part of the student chapter:
1. Python and Django workshop on 24th
March 2018
2. Ultimate Survivor on 1st
September 2018 (in MOSAIC)
3. MurdAR Mystery on 1st
September 2018 (in MOSAIC)
Photos:
Python and Django Workshop
Ultimate Survivor
MurdAR Mystery
MurdAR Mystery
ORGANIZERS:
IETE student chapter
VOLUNTEERS:
1. Brendon Castelino.
2. Feni Martina.
3. Sahad Chauhan.
4. Ameya Bhaktha.
5. Ashwani Balakrishnan.
6. Divya Kotian.
7. Vaishnavi Deo.
8. Chrishtopher Mathew
Python and Django workshop organised by IETE-SFIT was held on 24th
of March 2018. It
was a one day College level workshop.
Workshop timings: 9 am to 4:30 pm on 24
th of March
A total of 46 students attended the workshop. At 9 am, the workshop started. There were 2 slots.
9 am-1 pm : Python
2 pm-4:30 pm : Django
In the first session, python was taught. Students were asked to open Python 3.6 software.
Mam started python from the scratch including how to assign a variable, functions like print, how
to concatenate, variable types were also explained. Further, looping statements were taught as well
as different data types, strings, lists, tuples, dictionaries were taught. GUI interfacing in python
was also introduced including GUI library tkinter, Widgets of tkinter, Attributes of widgets,
Layout managers and grid layout managers.
In the second session, students revised the important concepts and they were informed about
the various errors they might face while coding in python and the troubleshooting them. Then the
students were introduced Django and they were taught about the installation of Django which
included creating an virtual environment and activating it, then Django was installed using “pip
install Django” and its version was checked using “python –m django - -version”. Later they were
taught how to create a website skeleton and Django server webpage.
WORKSHOP INSTRUCTORS:
Dr. Joanne Gomes.
BUDGET:
FEES:
100/ person
No of students who attended the workshop: 46
Non IETE members: 35
IETE member: 11
Sr.no Expenditure Rs
1 Certificate cost 530
2 Refreshments 770
3 Gift (Pen) 200
Total Amount 1500
Total profit :3500
IETE COMMITTEE ACCOUNT= Rs3500-Rs1500
=Rs 2000/-
STUDENTS LIST:
NAME CLASS
1. Aniket Gurav SE EXTC A
2. Nikhil Jog SE EXTC A
3. Vinita Rane SE EXTC B
4. Jaydeep Asolkar SE EXTC A
5. Aditya Bhide SE EXTC A
6. Saish Jadhav SE EXTC A
7. Gavin Furtado SE EXTC A
8. Jaspreet Singh SE EXTC A
9. Sakina Baranwala SE EXTC A
10. Swati Agnihotri TE EXTC A
11. Piyush Punmiya SE EXTC B
12. Nisha R Ladhe SE CMPN A
13. Komal P Ladhe SE EXTC A
14. Shruti A Kasar SE EXTC A
15. Sheldon D’souza SE EXTC A
16. Rupesh Jaisawar SE EXTC A
17. Nitish Choudhary SE EXTC A
18. Harshit Praikh SE EXTC A
19. Ankur Mistry SE EXTC A
20. Sangita Marri SE EXTC A
21. Anjali Jaiswal SE EXTC A
22. Manisha Mane SE EXTC A
23. Austin Fernandes SE EXTC A
24. Aditya Basroor SE EXTC A
25. Abhishek C Salian SE EXTC B
26. Nasir Shaikh SE EXTC B
27. Yash Singh SE EXTC B
28. Varun Patil SE CMPN B
29. Harshal Patil SE IT B
30. Sohan Pawar SE IT B
31. Ameya Darvi SE CMPN B
32. Aditya Patel SE EXTC B
33. Shivani Pandit SE IT B
34. Neha Salunke SE IT B
35. Sresht Chavan SE EXTC A
36. Parth Bhatt SE EXTC A
37. Ronak Gala TE EXTC A
38. Brendon Castelino. TE EXTC A
39. Feni Martina. TE IT A
40. Sahad Chauhan. TE EXTC A
41. Ameya Bhaktha. TE EXTC A
42. Ashwani Balakrishnan TE EXTC A
43. Divya Kotian TE EXTC A
44. Vaishnavi Deo TE EXTC A
45. Christopher Mathew TE EXTC A
46. Kedar Kumta SE EXTC A
HOME AUTOMATION USING IOT.
INSTITUTION FOR ELECTRONICS AND TELECOMMUNICATION
ENGINEERS (IETE)
ORGANIZERS:
1. Prako Technocratz.
VOLUNTEERS:
1. Brendon Castelino.
2. Feni Martina.
3. Ketan Munasu.
4. Ameya Bhaktha.
5. Jedidiah Harpanahalli.
Home Automation using IOT workshop organised by IETE-SFIT was held on 24th
-25th
of
February 2018, in association with Prako Technocratz. It was a two day national level workshop.
Workshop timings: 9 am to 4pm on the 24th and 25th
of September.
Day 1: A total of 16 students attended the workshop. On the first day of workshop, students
were informed about what is IOT and how IOT has become a part of day-to-day life. The basic
idea of IOT was given to make the students understand and have a rough idea of the topic.
Students were given the IOT workshop folders and were told about the advantages of using IOT.
Later they were divided into a group of 5 and were asked about their idea of what they thought
IOT was.
After that students were asked to open ARDUINO IDE software. All the basics needed for
development were taught. The use of void setup and void loop were explained. Then the students
were taught some basic steps on how to write a program in the software and upload it. For this,
an Led was connected to the Arduino Nano and code was written to alternatively switch it on and
off and importance of delay was taught. Interfacing of WIFI module (ESPS266-01) with Arduino
Nano was taught and various AT commands were explained.
Day 2: On the second day, students revised the important concepts and they were informed
about the various errors they might face while uploading code to the Arduino Nano and the
errors while connecting the wifi and hotspot. Later interfacing of temperature sensor along with
its Arduino IDE code was taught. Further students were asked to register on thingspeak so that
they can view graphical representation of the output of the temperature sensor interfaced with
Arduino Nano. They were also told to download the Blynk app and were shown the working of
a relay and how they can remotely control its function using IOT and the Bynck app.
In the end a competition was held in which a small task based on the teachings of the two
days was given and students were told to write a code in Arduino IDE software to blink the LED
once and then have it off permanently, the first one to complete was chosen as the winner and
were given certificate of merit and an Internship opportunity in summer at Prako Technocratz.
The event had 4 rounds. Round 1 had mini militia Or angry birds(player’s choice). Round 2 was taboo(where one participant will explain the word given and others have to guess that technical
word). ,Round 3 was Tech-o-brick which was a team-work round including holding a brick, solving
jigsaw, mounting on breadboard and writing a simple code in turbo C. Round 4 was technical spy where
participants have to solve a mystery by cracking clues on their way .The first group to solve the mystery
