Leader in Instrumentation and Electrical Supports
Instrument Stands
Instrument Stands• Singles, Doubles, Triples, Channel Stands• Wall Mount, Floor Mount, Direct Burial, Pipe/Cable
Mount• Hardware: Grating clamps, Beam Mount Bracket• Hot Dipped Galvanized, Aluminum, Stainless Steel
TechLine Mfg. Instrument Stands
Use Standard Stock Instrument Standsto Save Costs and Improve Lead TimeSingles | Doubles | Triples | Channel/Stop Button
Using TechLine Mfg. standard stocked instrument stands helps achieve time and labor savings. TechLine Mfg. offers a number of standard sizes, including 54” and 60” single, double, and triple stands with 8” base plates. We also offer a popular 52” stand with a 10-inch baseplate as well as a 48” stand with an 8-inch baseplate. TechLine Mfg. Instrument Stands are fabricated from 2” Sched-ule 40 pipe and utilize a flat cap design. TechLine Mfg. offers Hot Dipped Galvanized (HDG) Carbon Steel meeting ASTM A123/89 requirements as standard, or optional coatings are available upon request. HDG stands come standard with weep holes and an open base to allow for drainage.
2 (800) 395-3369 www.techlinemfg.com
TechLine Mfg. manufactured more than 40,000 instrument stands
in 2019.Let us help you with yours!
Instrument Stand TypesInstrument Stand Types• Single Floor Stands• Double and Triple Floor Stands• Triple and Quad MultiRack
Floor Stands• Channel Floor stands• Wall Mount Stands• Cable Mount• Pipe Mount Stands• U-Bolt Mount • Modular Stands
Large inventories in Spanish Fort, AL. and La Porte, TX.
Materials and Finishes• Hot-dipped Galvanized per
ASTM A-123• Aluminum• 304SS• 316SS• Painted • Powder Coated
See our website or full catalogSee our website or full catalogfor complete information.for complete information.
3
TechLine Mfg. Instrument Stands
(800) 395-3369 www.techlinemfg.com
Custom FabricationCustom FabricationWith our onsite fabrication facility,TechLine Mfg. can handle any ofyour custom requirements: customstands, racks, brackets, etc.
Channel Standsavailable, often used
for push button stands and control
station stands.
For wall mount stands, check out our Beam
Mount Bracket. No drill-ing or welding required
Mounting hardware and accessories are alsoavailable, including:• Grating Fasteners• Beam Mount Brackets• Instrument Support Kits• Capillary Spools• Flag Plates
Leader in Instrumentation & Electrical Supports
Call or visit our website today to find out how ourModRack can provide solutions for you in the field.
TechLine Mfg. ModRack
TechLine Mfg. introduces an innovative new product that reduces engineering and field installation time. ModRack is perfect for permanent or temporary ap-plications, providing fully-adjustable crossbar receivers to accommodatea wide arrangement of electrical panels, analyzers, etc. in industrial settings.
TechLine Mfg.’s ModRack can accommodate awide arrangement of
electrical panels.
Adjustable receiversaccommodate single
strut, double strut,or 2” square tubing
• Reduce engineering time• Reduce field fabrication• Reduce field labor and cost• Convenience of pre-fabbed racks• Portable, adjustable configurations• Single- or dual-sided• No crane or heavy lifting equipment
required• Heavy-duty version available• Variety of finishes available• Optional roofs available
TechLine Mfg.Corporate Office and Factory
30516 Sgt. E.I. Boots Thomas Dr. • Spanish Fort, AL 36527 Toll Free: 1-800-395-3369 • Fax 251-380-7301
TechLine Mfg.Houston Regional Service Center
11810 W Fairmont Pkwy. • La Porte, TX 77571Toll Free: 1-800-395-3369 • Fax 832-284-4798
www.techlinemfg.com
