TM

MEASUREMENT

& INSTRUMENTATION LAB

B.S.PYROMATIC INDIA (P) LTD.,AN ISO 9001 - 2000 CERTIFIED COMPANY

OP

B.S

.PY

RM

AI

TC

IN

DIA

()

LT

D.,

Strain Measurement Module - BSPIL-IST-05001

This comprises of Cantilever Beam bounded with four strain gauges, pan and weights upto 1Kg. Digital 3½ digit indicator module is supplied to read the micro strain.Specification:Cantilever Beam Capacity : 1kgBeam Dimension : 225 x 30 x 4(LxBxT in mm)Bridge Selection : Half & FullStrain Gauge Resistance : 350 Ohms +2Gauge Factor : 2 to 2.1Dead Weights : 100 Grams x 10 Nos.Indicator : 3½ digit to read upto ± 1999 µ strain.

Displacement Measurement Module - BSPIL-IST-05002

This comprises of LVDT with micrometer jig fitted on the base plate to give displacement to the core of LVDT. Digital 3½ digit indicator is supplied to read the displacement in mm.

Specification:LVDT Range : ± 10mmMicrometer : 0 - 25mm, 0-50mmIndicator : 3½ digit to read upto ±10mm

Temperature Measurement Module - BSPIL-IST-05003

This comprises of thermocouple, RDT & thermistor to measure temperature upto 100 ºC, small heating source up to 100 ºC and digital temperature indicator is provided to read temperature.Specification:Temperature Range : 0 - 100ºC RTD : Pt - 100Thermocouple : Fe / K (J-Type)Thermistor : 5/10 K Ohms (NTC -Type)Temperature Source : Electric KettleSource Measurement : Glass Bead Mercury ThermometerIndicator : 3½ digit display to read temperatureThermocouple TrainerRDT TrainerThermistor Trainer

Load Measurement Trainer - BSPIL-IST-05004

IT comprises of strain gauge based load cell loading arrangement to load in compression, weights and digital load indicator to read the load in Kg.

Specification:Load cell : 1Kg capacity Weight : 100 gms. x 10 nos.Indicator : 3½ digit display to read upto 1 Kg.Resolution : 0.01 Kg.

Pressure Measurement Trainer - BSPIL-IST-05005

This comprises of strain gauge based pressure cell, foot pump to build the pressure tank fitted with release valves and a bourdon pressure gauge. Digital pressure indicator to read the pressure in Kg/Cm² is provided.Specification:Pressure Cell : 10Kg / Cm²Pressure Source : Foot pump to build pressure upto 5Kg / Cm²Indicator : 3½ digit display to read upto 10 Kg / Cm²Resolution : 0.1 Kg / Cm²

Torque Measurement Trainer - BSPIL-IST-05006

This comprises of strain gauge based reaction type torque transducer, fulcrum arm of 1M length, with L angle to mount the sensor, pan & weights with digital torque indicator to read the torque in Kg-m.Specification:Torque Cell : 1Kg-m capacity Loading : L angle and 1 m length fulcrum armWeights : 100gms x 10 nosIndicator : 3½ digit display to read upto 1 Kg / Cm²Resolution : 0.01 Kg / Cm²

Speed Measurement Trainer - BSPIL-IST-05007

This comprises of photo reflective & magnetic pickup sensors, fractional HP motor with speed regulator, tone wheels of 60 teeth fitted rigidly on a base with digital speed indicator.Specification:Speed Sensors : Photo reflective & Magnetic pickupMotor : 12V FHP DC motorSpeed controller : Variable DC power supply 12VIndicator : 4 digit display to read upto RPM (max)

L.D.R. Trainer - BSPIL-IST-05008

This comprises of light dependent resistor (LDR) fitted to the shaft, which moves inside the tube where lamp is fitted in the other end. Variable DC voltage source is provided to vary the light intensity. Digital indicator is supplied to measure the light intensity in terms of distance moved between LDR and light source.

Specification:LDR : 10 K OhmsBulb : 12 V BulbDisplacement : 30mmIndicator : 3½ digit display to read upto 30mm with variable voltage source to the bulb.

Piezoelectric Trainer - BSPIL-IST-05010

This comprises of piezoelectric crystal mounted inside housing and fitted on a plate. Digital indicator is supplied to indicate the impact force.Specification:Piezoelectric Transducer : 1000 Pf Piezo-crystalIndicator : 3½ digit display to read impact force.

Capacitance Trainer - BSPIL-IST-05011

This comprises of parallel plate / angular capacitor with dielectric medium air sensor, mounted on the base plated with scale for displacement. Digital indicator is provided to read the change in capacitance in terms of displacement.Specification:Capacitance Sensor : Parallel Plate capacitor for Linear Displacement and Angular displacement.Displacement : 50mm / 90ºIndicator : 3½ digit display to read displacement

Level Measurement Trainer - BSPIL-IST-05012

Level Trainer is a table top module, it comprises of a measuring tank of 50 cm length, sump tank and load cell or capacitance as level sensor. A vertical pump is fitted to circulate the water. Digital display indicator is provided to display water level in cm.Specification:Level Sensor : Load cell / capacitanceMax. Level : 50 cmPump : FHP vertical pumpDigital indicator : 3½ digit LED display to read levels in cms.

Rotameter Trainer Module - BSPIL-IST-05013

The setup is a table top module, it comprises of source and measuring tank. The measuring tank is made of acrylic material with gradation marked in liters. A small FHP pump is fitted to circulate the water. A Rotameter with control valve is used to measure the flow rate. Digital timer is provided to note down the duration of flow and the volume of water is measured by the markings on the measuring tank to calculate the actual flow rate.Specification:Tank Capacity : Max. 5 liters Rotameter : Acrylic / glass body floating dead weight typeFlow rate : 6 to 100 LPMPump : FHP vertical pumpTimer : 0 to 30 minutes digital timer

Inductance Trainer - BSPIL-IST-05014

This comprises of a coil wound on a bobbin in which a magnetic material core moves as sensor. The displacement of the core is measured and displayed through a digital indicator.Specification:Inductance sensor : Copper wire wound on hallow bobbin inside which a MS core moves.Displacement : 20mmIndicator : 3½ digit display to read upto 20mm

Orifice Meter Trainer - BSPIL-IST-05015

This setup is a table top model, This comprises of source & measuring tank. The measuring tank is of acrylic with liters graduated. A small FHP pump is fitted to circulate the water. A orifice meter with U-tube manometer is provided to measure the flow rate. A rotameter is provided to measure the exact flow rate. Digital timer is provided to note down the duration of flow.Specification:Tank capacity : Max. 5 Liters Rotameter : 6 to 100 LPMOrifice Meter : Small orifice plate with ¼ BSP tube fitted with U-Tube manometer.Flow Rate : 6 to 100 LPMPump : FHP vertical pumpTimer : 0 to 30 minutes digital timerDifference pressure sensor in U-type manometer with digital flow indicator at extra cost can be supplied

Current to Pressure Trainer - BSPIL-IST-05016

This setup comprises of a I to P converter fitted on a base. Two pressure gauges are fitted one at the input side and the other at the output of the I to P converter. A current source with digital display is provided to excite the I to P converter. A constant air supply should be provided to the system at 20 PSI pressure from a standard compressor.Specification:Air Input : 20 PSI constant air supply from a compressorAir Output : 3 to 15 PSICurrent Source : 4 - 20 mA generator with digital display. Current variable through potentiometer.Pressure Gauge : Bourdon type pressure gauge of 30 PSI range - 2 Nos.Optional : Air compressor with air regulator to suit the requirement

Pressure to Current Trainer - BSPIL-IST-05017

This setup comprises of pressure chamber fitted on a base board. A pressure transducer and bourdon pressure gauge are fitted to the chamber. Digital pressure indicator with transmitter output 4 to 20 mA can be measured by a current meter. Foot air pump is provided to build the pressure.Specification:Pressure sensor : Strain gauge based pressure transducerCapacity : 30 PSI Pressure Source : Foot air pumpIndicator : 3½ digit LED displayOutput : 4 - 20 mAPower : 230 V 50 Hz

Vibration Measurement Trainer - BSPIL-IST-05018

This comprises of vibration generator of capacity 5 Newton with vibration exciter. Piezoelectric accelerometer is used to sense the vibration. Digital display unit will display displacement, Velocity & acceleration sensed by the sensor.Specification:Vibration Generation : Capacity 5 NewtonExcitation Frequency : 50 Hz to 1 K HzExcitation Voltage : 0 to 10 V P to PVibration Sensor : Piezoelectric type acceleratorVibration Indicator : 3½ digit LCD display by selection through selector switchRange : Acceleration - 0.1 to 199.9 m/s²Velocity - 0.001 to 19.99 cm/s rms)Displacement - 0.003 to 1.999 mm (p-p)Power : 230 V 50 Hz

OA

T

PB

.S.P

YR

MIC

IN

ID

A(

) L

TD

.,

Dead Weight Pressure Gauge Tester BSPIL-IST-05019

This is ideal for testing and calibration of pressure gauges, pressure transducers, recorders, digital calibrators etc..The system used in the dead weight is vertically mounted precision lapped piston and cylinder assembly with accurately calibrated mass for loading the piston. Pressure is build easily by single cylinder pump at very high rate. The whole system is housed inside a stainless steel case with elegant look. Pressure ports are provided to fix the gauges to be tested. Acrylic see through oil tank is designed to use it as oil reservoir.

Specification:Capacity : 1 to 10, 1 to 25, 1 to 50, 1 to 100, 1 to 200Pressure port : 3/8 BSP threadAccuracy : 0.1% of FSDStarting Pressure : 0.5 Kg/cm²Size : 350x350x200 mm(LxBxH)

Bourdon Guage Trainer - BSPIL-IST-05020

This comprises of bourdon pressure gauge fitted on a pressure chamber, a displacement sensor is attached to the edge of the bourdon tube to sense the deflection of the bourdon tube due to pressure. The displacement indicator is provided to measure the deflection of the tube in terms of pressure and also in mm.Specification:Sensor : LVDT of ±2.5mm fitted to the edge of bourdon tube.Master Gauge : Bourdon tube pressure gaugeDisplay : 3½ digit to read pressure upto 30 PSI and displacement upto ±2.5mm Pressure Source : Foot pump to build pressure upto 30 PSI

Instrumentation Tutor I - BSPIL-IST-05021

This comprises of temperature and speed using different methods. RTD, thermistor and thermocouple are used as sensors with digital temperature indicator to measure temperature. A small water kettle is supplied as a temperature source upto 100ºC. Glass bead thermometer is used as standard temperature measurement source to conduct the experiment. Magnetic and photo reflective sensors are used to measure speed. A FHP motor with speed regulator is used as speed source. To the shaft 60 teeth tone wheels are fixed to generate pulses.

Instrumentation Tutor II - BSPIL-IST-05021A

This comprises of measurement of displacement & strain. To measure the displacement, LVDT is used as sensor of range ± 10 mm. A calibration jig with micrometer is supplied to conduct the experiment. For strain measurement cantilever beam bonded with four strain gauges is used as sensor. Pan and weights up to 1kg is provided to conduct the experiment. Digital readout is provided to measure the parameters.

Instrumentation Tutor III - BSPIL-IST-05021B

This comprises of piezoelectric crystal to measure vibration force, LDR to measure light intensity with respect to distance, capacitance to measure displacement, resistance to measure angular displacement and inductance also to measure displacement. The components used are supplied with the setup to conduct the experiments. An attempt is made to demonstrate the usage of the components in measurement and instrumentation field. Digital readout is provided to show the measured parameter

Instrumentation Tutor IV - BSPIL-IST-05021C

This comprise of load, torque & pressure. For measurement of load a strain gauge based load cell of capacity 1 Kg is supplied. For torque measurement a torque cell of 1 Kg - m with fulcrum arm of 1 M length is supplied. Dead weight upto 1 Kg is supplied to conduct the experiment. For pressure measurement pressure cell of 5 Kg/cm² capacity is supplied along with a foot pump & bourdon pressure gauge to build pressure upto 5 Kg / cm² to conduct the experiment. Digital readout is provided to indicate the parameter.

PLC Trainer - BSPIL-IST-05022

Main Unit SpecificationMicro Processor based PLC system with built in 12 Digital Input, 8 Digital Output line, 4 Analog Input & 1 Analog Output and RS 232 serial interface to up load and down load facility to / from PC system with required software compactable with IBM PC to facilitate to use Ladder Editor Programs.

Tool Dynamometer & Indicators - BSPIL-IST-05023

Used for measuring cutting forces on various machines like lathe, drill, milling machines. All three direction forces are measured simultaneously and displayed. Tool dynamometers are useful to study, analyze the optimum feed, speed and depth of cut on different materials. The dynamometers are also available in various capacities as per customer requirement

Differential Pressure Transmitter Trainer - BSPIL-IST-05024

This table top model comprises of two pressure chambers. One for high pressure and another for low pressure gauges. The differential pressure transmitter is connected to the two chambers. The pressure is built by a foot air pump. Digital instrument is provided to indicate the differential pressure with transmitter output.

Specification:Sensor : Strain gauge based differential pressure sensorCapacity : 30 PSIPressure Sensor : Bourdon tube pressure gauges Pressure Source : Foot air pumpDisplay : 3½ digit LED display indicatorOutput : 4-20mA outputPower : 230 V 50 Hz supply

Level Control Setup - BSPIL-IST-05025

Level Control Setup comprises of Measuring tank fitted with Level transmitter to measure the Water Level. The Flow of water is controlled by a control valve actuated by a I to P converter. Rotameter is provided to measure the flow rate. The system is mounted on a table top model with all necessary pipings. The water inlet and outlet is provided through a manual control valve. Water at approx. 100 LPH has to be supplied to the system externally. The electronic panel comprises of ADC/DAC card with RS-232 interface. Displays indicate the process value and set value. Software is provided for experimentation, PID Control settings (P, PI, PD and PID mode) Data storing, Online data acquisition, Off line analysis, Printing of data's can be done easily.Specification :Level Sensor : Capacitance Type Level Sensor.Output : 4 - 20m AMeasuring Tank: Capacity 5 liters, with graduation.Rotameter : 10-100 LPHControl Value :Globe 2 way ½" with Diaphragm type actuator, Total stem travel 18mm, Air operated, 3 to 15 PSI pressure.Air Regulator : ¼" BSP, for 1 to 15 PSI pressureI/P Converter :4 to 20mA input output 3 to 15 PSIADC/DAC Card : 12 bit resolution, 8 input 1 output with RS 232 Serial Interface to PC.PID Controller :Software to set P, PI, PID, PD Mode with Controller and Data Acquisition, Trend plot, Offline, Analysis and Printing.

OA

T

PB

.S.P

YR

MIC

IN

DIA

()

LT

D.,

Temperature Control Setup - BSPIL-IST-05026

Temperature Control Loop Setup comprises of RTD temperature Sensor to sense the temperature. The water glows through the Rotameter and Process tank to which a heating coil is fitted. The heater is controlled by a Thyrister drive. The Thyrister drive is connected to PID controller. The manual control valve can control the water flow. The system is mounted on a tabletop model with all necessary piping. The water inlet and outlet are brought out through a manual control valve. Water at approx. 100 LPH has to be supplied to the system externally.The electronic panel comprises of ADC/DAC card with RS-232 interface. Displays indicate the process value and set value. Software is provided for experimentation, PID Control settings (P, PI, PD and PID mode) Data storing, Online data acquisition, Off line analysis, Printing of data's can be done easily.Specification :Temperature transmitter : RTP (PT-100) with transmitter Output 4 - 20m ARotameter: 10-100 LPHHeater : 1.5 KWThyrister : 1.5KW with 4 to 20 mA input to control heater.ADC/DAC Card :12 bit resolution,8 input 1 output with Rs 232 Serial Interface to PC.PID Controller: Software to set P, PI, PID, PD Mode with Controller and Acquisition, Trend plot, Offline, Analysis and Printing.

Pressure Control Setup - BSPIL-IST-05027

Pressure Control Setup comprises of Pressure tank fitted with Pressure transmitter to measure the pressure. The pressure is controlled by a pneumatic control valve operated by a I to P converter. The input pressure is fed from air compressor. The whole system is mounted on a Table top Model with all necessary Piping.

The electronic panel comprises of ADC/DAC card with RS-232 interface. Displays indicate the process value and set value.Software is provided for experimentation, PID Control settings (P, PI, PD and PID mode) Data storing, Online data acquisition, Off line analysis, Printing of data's can be done easily.

Specification :Pressure Transmitter: 5 Kg/cm2 strain gauge based. Output : 4 - 20m APressure Tank : 2 Liter CapacityControl Value : Globe 2 way ½" with Diaphragm type actuator, Total stem travel 18mm, Air operated, 3 to 15 PSI pressure.Air Regulator : ¼" BSP, for 0 to 15 PSI pressureI/P Converter : 4 to 20mA input output 3 to 15 PSI ADC/DAC Card : 12 bit resolution,8 input 1 output with Rs 232 Serial Interface to PC.PID Controller : Software to set P, PI, PID, PD Mode with Controller and Acquisition, Trend plot, Offline, Analysis and Printing.

Temperature Controller cum Indicato r- BSPIL-IST-05028

Each powder coated panel comes with each type of sensors and Temperature which will enable the student to segregate and do the practicals more effectively and efficiently by finding out the mill volt and checking the corresponding Temperature in C with the help BSIS charts.1. 'J' Type 2. 'K' type 3. RTD Type/PT 100

Optical Radiation Pyrometer - BSPIL-IST-05029

This is an equipment which measures the Temperature of an unknown source of heat The equipment is operated by battery and the temperature can be read on a meter. The coil provided in the equipments is heated to colour which matches with the heat source colour.

Analog Range : 0 - 1800 C Digital Range : 0 - 400 C

Pyromatic Rotometer Set Up With Digital Timer - BSPIL-IST-05030

This equipment consist with 2 graduated tanks and a motor to pump the water from bottom tank to the top tank which is totally housed in a column stand which will enable the student to study the flow rate of given liquid and the quantity of the liquid pumped in the top tank and reduction of quantity from the bottom tank and see the actual flow through the Rotometer and compare the quantity of the flow in the top tank which is graduated and check the timing with the digital timer and the timer also facilitate auto shut-off of motor which will avoid air block to conduct the subsequent tests also a valve is provided to drain the pumped water to bring back to the bottom tank through gravity force which will enable the student to have the second test cycle and so on.

Only Rotometer - BSPIL-IST-05031 A. Range : 20 to 200 cc/MinFloat : PVC ConicalScale Length : 85mm. Approx

B. Range : 50 to 500 cc/MinFloat : 304 SS PVC ConicalScale Length : 85mm approx

C. Range : 0.1 to 1 LPMFloat : 304 SS PVC ConicalScale Length : 85mm approx.

D. Range : 0.5 to 5 LPMFloat : 304 SS ConicalScale Length : 125mm

E. Range : 1 to 10 LPMFloat : 304 SS PVC ConicalScale Length : 85mm approx.

Measurements Of Speed - BSPIL-IST-05032

In order to educate the students in the field of speed measurements an experimental setup is required. It consists of source, snesors and measuring equipments (including digital non-contact type and digital contact type Tachometers).

a. Source:This consists of a variable speed attachments and a motor. The maximum speed will be 3000 rpm apporx.

b. Sensors:Non-contact magnetic typeNon-contact photo reflective pickupBoth the sensors can be used to be connected to a digital speed indicator (Tachometer)

c. Digital Tachometer Non-contact type:-Display : 4 Digits LEDRPM Range : 10 to 9999 RPMResolution : 1 RPM

d. Digital Tachometer Hand Held Contact Type:Range : 10 to 9999 RPMDisplay : LED 4 digits.

Strain Gauge - BSPIL-IST-05033

Unique strain measuring system is a unique strain gauge experimenter instrument is a demonstration set up for measurement of strain exerted on the material. It comprises of a complete instrument with instrumentation amplifiers, gain amplifiers power supply with a cantilever beam mounted on a base with pan and weight for demonstration and studying and understanding various aspects of strain gauges.a. Cantilever beam capacity 1Kgb. Dead weights 100Gramsx 10Nos.c. A 3 ½ -digit display to read up to -1999 micro strain with connection to use with the above sensor.d. Strain gauge resistance 350 ohms.e. Gauge factor 2 to 2.1f. Bonded strain gauges

S.

YO

MA

IT

CIN

P

)L

TD

,B

.P

R

DIA

(

.

Stroboscope - BSPIL-IST-05034

This can also be used to measure the RPM

Display : LED 5 digitsRange : 250 to 18,000 RPM

Measurement Of Load And Forces - BSPIL-IST-05035

The complete lab set up for the educational institution is offered under loading source, load cells and load indicator.

Loading sourceThis consists of hydraulic system, stand and platform for keeping the load measuring units. The loading can be released with a screw.

Load Cells - BSPIL-IST-05036

This is a load sensor having strain gauge, the specification is as follows.

Capacity : 1 kgfmaximum over load : 50% of the rated capacityType : 'S' type compression

Loading Indicator Digital Type:Range : 100 kgf.Indication : 3 ½ digit LEDLinearity : +/- 0.1% FSDStability : +1 digit

Measurement Of Vibration With Acceleration - BSPIL-IST-05037

To carry our any experiment of vibration the following instruments are needed. We offer you the complete set of equipments so as to enable the student to have a broad idea about vibration studies.

Piezo electric vibration pick upVibration meter which measures acceleration of vibration

Measurement Of Pressure Tester - BSPIL-IST-05038

0.5 To 25 KgDead Weight pressure gauge type

Mechanical Proving Ring - BSPIL-IST-05039

Proving ring dynamometer to measure the force made out of special steel with close tolerances with dial gauge base plate and Top Pan to load with weight & test the deflection rate.

Range : 100 KgDial gauge : 0.10mmAccuracy : 0.01mm

TM B.S.PYROMATIC INDIA (P) LTD.,

Phone : 091-44-24890009 / 24890710. Fax: 091-44-24897880E-Mail: pyromat@satyam.net.in. Websites : www.bspyromatic.com.

P.B.No.6033,27/1,XII Avenue,Ashok Nagar,Chennai-600 083.INDIA.

Marketed by:

AN ISO 9001-2000 COMPANY

Above Specifications are indicative and may have variations as per Current R&D

We do manufacture and deal other mechanical labs such as : Imaging, Metallurgy, Metrology, Dynamics, Heat Transfer, Thermal, Biotechnology, Refrigeration & Air Condition, Fluid Mechanics, Foundry, Non Destructive Testing, Strength Of Materials, Workshop.