INSTRUMENTS WITH DIGITAL SOUL
VER. 5
axiomet.eu
www.axiomet.eu02
AX-7030 Analogue-Digital Multimeters
Specifications:
Features:
Standard equipment:
l8 functions, 20 ranges ldiode and continuity test with buzzer lbattery test function lprotective holster
Display : analogue and LCD 3,5 digits (15 mm) DC voltage : 0,2/2/20/200/600V ± 3% / ± 0,5% +2c AC voltage : 0,2/2/20/200/600V ±4% /± 0,8% + 3c DC current : 0,2mA/2mA/20mA/200mA/10A
: ±3% / ±1% +3c AC current : 0,2mA/2mA/20mA/200mA/10A
: ±4% / ±1,5% +3c Resistance : 200/2K/20K/200K/2M/20MΩ
: ±3%/± 0,8% +3c Battery test : 1,5V (100 mA) / 9 V (10 mA) Diode test : test current about 1 mA
: test voltage about 2,4 V Continuity test : acoustic alarm for R
www.axiomet.eu02
AX-7030 Analogue-Digital Multimeters
Specifications:
Features:
Standard equipment:
l8 functions, 20 ranges ldiode and continuity test with buzzer lbattery test function lprotective holster
Display : analogue and LCD 3,5 digits (15 mm) DC voltage : 0,2/2/20/200/600V ± 3% / ± 0,5% +2c AC voltage : 0,2/2/20/200/600V ±4% /± 0,8% + 3c DC current : 0,2mA/2mA/20mA/200mA/10A
: ±3% / ±1% +3c AC current : 0,2mA/2mA/20mA/200mA/10A
: ±4% / ±1,5% +3c Resistance : 200/2K/20K/200K/2M/20MΩ
: ±3%/± 0,8% +3c Battery test : 1,5V (100 mA) / 9 V (10 mA) Diode test : test current about 1 mA
: test voltage about 2,4 V Continuity test : acoustic alarm for R
www.axiomet.eu04
AX-594 Automatic Multimeters with Bargraph and USB
Specifications:
Features:
Standard equipment:
lLCD display 3 3/4 digits, 3999 counts with bargraph, digits 33 mm highlauto ranging functionlUSB interfacelHOLD functionlMin./Max. functionlrelative measurement function RELlover range indicatorllow battery indicatorldiode and continuity test with buzzerlauto power off after 30 min.lprotective holster
Display : LCD display 3 3/4 digits, capacity 3999 counts, digits 33mm high
Sampling rate : 3x/sDC voltage : 0,1mV… 1000VAC voltage : 0,1mV… 750VDC current : 1μA... 10AAC current : 1μA... 10AResistance : 0,1Ω... 40MΩCapacitance : 10pF... 200µFFrequency : 0,01Hz… 30MHzTemperature : -20ºC to 1000ºCDiode test : test current 1mA / test voltage 3VContinuity test : acoustic alarm for R 50V - frequency : 50 Hz - distance : < 150 mm Diode test : test current 1 mA DC,test voltage 1,5 V DC Continuity test : acoustic alarm for R
www.axiomet.eu04
AX-594 Automatic Multimeters with Bargraph and USB
Specifications:
Features:
Standard equipment:
lLCD display 3 3/4 digits, 3999 counts with bargraph, digits 33 mm highlauto ranging functionlUSB interfacelHOLD functionlMin./Max. functionlrelative measurement function RELlover range indicatorllow battery indicatorldiode and continuity test with buzzerlauto power off after 30 min.lprotective holster
Display : LCD display 3 3/4 digits, capacity 3999 counts, digits 33mm high
Sampling rate : 3x/sDC voltage : 0,1mV… 1000VAC voltage : 0,1mV… 750VDC current : 1μA... 10AAC current : 1μA... 10AResistance : 0,1Ω... 40MΩCapacitance : 10pF... 200µFFrequency : 0,01Hz… 30MHzTemperature : -20ºC to 1000ºCDiode test : test current 1mA / test voltage 3VContinuity test : acoustic alarm for R 50V - frequency : 50 Hz - distance : < 150 mm Diode test : test current 1 mA DC,test voltage 1,5 V DC Continuity test : acoustic alarm for R
www.axiomet.eu06
AX-503 Multimeters - SMD Measurement Tweezers
Specifications:
Features:
llow battery indicator ldiode test lmeasures resistance and capacitance lrelative measurement function lauto power off
Display : LCD 3,75 digits (6000)Resistance : 0,1Ω...40MΩ Capacitance : 1pF...200µF Dimensions : 181 x 35 x 20 mm Weight : 65 g (with battery) Supply : 1,5V LR44, 2 batteries
AX-T520 Digital Multimeters with LAN Tester
Features:
Specifications:
Standard equipment:
llarge LCD display with backlightlLAN testing function (RJ45 connection) and telephone lines testing functionlHOLD function (holds measurements results on the display)lcontinuity test with buzzerlmanual ranginglbattery tester 1,5V, 6V, 9Vllow battery indicator
Display : LCD 3,5 digits (3999) digits 15mm high
DC voltage : 200mV/2V/20V/200V/1000VAC voltage : 200mV/2V/20V/200V/750VDC current : 0,2mA/2mA/20mA/200mA/10AAC current : 0,2mA/2mA/20mA/200mA/10AResistance : 200Ω/2kΩ/20kΩ/200kΩ
: 2MΩ/20MΩ/200MΩContinuity test : acoustic signal for R < 70Ω Dimensions : 185 x 85 x 44 mmWeight : 360 g (with battery)Supply : 9V 6F22 battery
(not included)Safety : EN61010:
Cat. II 600V, Cat. III 300V
test leads setadaptor for LAN network testing
AX-8450 High Precision Table Multimeters 4,5 digits True RMS
Features:
lauto ranginglhigh precisionlHOLD function (holds measurements results on the display)lMin./Max./Rel. functionldBm and dB measurementldiode and continuity test with buzzerlrelative measurementlmanual, automatic or external triggerlremote interface RS-232ClUSB interfacelSCPI programming language
Specifications:Display : dual LCD 4,5 digitsSampling rate : to 25x/sDC voltage : 10μV...200mV/2V/20V/200V/1000VAC voltage : 10μV...200mV/2V/20V/200V/750VDC current : 0,1μA...2mA/20mA/200mA/2A/20AAC current : 0,1μA...2mA/20mA/200mA/2A/20AResistance : 0,01Ω...200Ω/2kΩ/20kΩ/200kΩ
: 2MΩ/20MΩ
Frequency : 0,0001Hz...10Hz/100Hz/100kHz/1MHzDiode test : current test 0,5 mA / voltage test 2 VContinuity test : acoustic signal for R < 10 ΩDimensions : 225 x 100 x 355 mmWeight : 2,2 kgSupply : 110/220V ±10%
Standard equipment:test leads setsupply cable
AX-C708 Multimeters with Calibrator Function
Specifications:
Features:
lauto and manual ranging lautomatic power-off lHOLD function lbacklit LCD ldiode and continuity test with buzzer llow battery indicator
Display : LCD (3999)AC voltage measuring range : 0.1m...400m/4/40/400VDC voltage measuring range : 0.01m...40m/400m/4/40/400VAC current measuring range : 0.01m...40m/400mADC current measuring range : 0.01m...40m/400mAResistance measuring range : 0.1...400/4k/40k/400k/4M/40MΩFrequency measuring range : 0.01...50/500/5k/50k/100kHzDiode test : 0,2mA, 1VContinuity test : acoustic signal for R
www.axiomet.eu06
AX-503 Multimeters - SMD Measurement Tweezers
Specifications:
Features:
llow battery indicator ldiode test lmeasures resistance and capacitance lrelative measurement function lauto power off
Display : LCD 3,75 digits (6000)Resistance : 0,1Ω...40MΩ Capacitance : 1pF...200µF Dimensions : 181 x 35 x 20 mm Weight : 65 g (with battery) Supply : 1,5V LR44, 2 batteries
AX-T520 Digital Multimeters with LAN Tester
Features:
Specifications:
Standard equipment:
llarge LCD display with backlightlLAN testing function (RJ45 connection) and telephone lines testing functionlHOLD function (holds measurements results on the display)lcontinuity test with buzzerlmanual ranginglbattery tester 1,5V, 6V, 9Vllow battery indicator
Display : LCD 3,5 digits (3999) digits 15mm high
DC voltage : 200mV/2V/20V/200V/1000VAC voltage : 200mV/2V/20V/200V/750VDC current : 0,2mA/2mA/20mA/200mA/10AAC current : 0,2mA/2mA/20mA/200mA/10AResistance : 200Ω/2kΩ/20kΩ/200kΩ
: 2MΩ/20MΩ/200MΩContinuity test : acoustic signal for R < 70Ω Dimensions : 185 x 85 x 44 mmWeight : 360 g (with battery)Supply : 9V 6F22 battery
(not included)Safety : EN61010:
Cat. II 600V, Cat. III 300V
test leads setadaptor for LAN network testing
AX-8450 High Precision Table Multimeters 4,5 digits True RMS
Features:
lauto ranginglhigh precisionlHOLD function (holds measurements results on the display)lMin./Max./Rel. functionldBm and dB measurementldiode and continuity test with buzzerlrelative measurementlmanual, automatic or external triggerlremote interface RS-232ClUSB interfacelSCPI programming language
Specifications:Display : dual LCD 4,5 digitsSampling rate : to 25x/sDC voltage : 10μV...200mV/2V/20V/200V/1000VAC voltage : 10μV...200mV/2V/20V/200V/750VDC current : 0,1μA...2mA/20mA/200mA/2A/20AAC current : 0,1μA...2mA/20mA/200mA/2A/20AResistance : 0,01Ω...200Ω/2kΩ/20kΩ/200kΩ
: 2MΩ/20MΩ
Frequency : 0,0001Hz...10Hz/100Hz/100kHz/1MHzDiode test : current test 0,5 mA / voltage test 2 VContinuity test : acoustic signal for R < 10 ΩDimensions : 225 x 100 x 355 mmWeight : 2,2 kgSupply : 110/220V ±10%
Standard equipment:test leads setsupply cable
AX-C708 Multimeters with Calibrator Function
Specifications:
Features:
lauto and manual ranging lautomatic power-off lHOLD function lbacklit LCD ldiode and continuity test with buzzer llow battery indicator
Display : LCD (3999)AC voltage measuring range : 0.1m...400m/4/40/400VDC voltage measuring range : 0.01m...40m/400m/4/40/400VAC current measuring range : 0.01m...40m/400mADC current measuring range : 0.01m...40m/400mAResistance measuring range : 0.1...400/4k/40k/400k/4M/40MΩFrequency measuring range : 0.01...50/500/5k/50k/100kHzDiode test : 0,2mA, 1VContinuity test : acoustic signal for R
www.axiomet.eu08
AX-353 600A AC Clamp Meters
Specifications:
Features:
lauto and manual ranging lautomatic power-off lcontinuity test with buzzer ldiode test loverflow indicator llow battery indicator
Display : LCD 3 3/4 digits (3999)Max. diameter of measured cable : 38 mmAC current measuring range : 400/500AAC voltage measuring range : 400m/4/40/400/600VDC voltage measuring range : 400m/4/40/400/600VResistance measuring range : 400/4k/40k/400k/4M/40MΩTemperature measuring range : -20°C...+800°CCapacitance measuring range : 40n/400n/4µ/40µ/100µFFrequency measuring range : 4/40/400/4k/40k/400k/4M/10MHzDuty cycle factor : 0.1...99.9%Conform to the norm : EN61010 600V CAT IIWeight : 357 gDimensions : 190 x 55 x 24 mmPower supply : 3 batteries 3V CR2032
Standard equipment:case test leads
AX-354 AC/DC Clamp Meters up to 1000A
Specifications:
Features:
lautomatic power-off with disable functionlcontinuity test with buzzer lbacklit LCD ldiode test lcable integrity test llow battery indicator
Display : LCD 3 3/4 digits (4000)Max. diameter of measured cable : 38 mmDC current measuring range : 400/1000AAC current measuring range : 400/1000AAC voltage measuring range : 400m/4/40/400/600VDC voltage measuring range : 400m/4/40/400/600VResistance measuring range : 400/4k/40k/400k/4M/40MΩFrequency measuring range : 10/100/1000/10k/100k/1MHzWeight : 150 gDimensions : 190 x 64 x 24 mmPower supply : 3 batteries 3V CR2032Conform to the norm : EN61010 600V CAT II
Standard equipment:case test leads
AX-380 AC/DC Clamp Meters up to 2000A
Specifications:
Features:
lautomatic power-off lHOLD function ldisplay zeroing function in DCA measurements ldiode and continuity test with buzzer llow battery indicator lREL function
Display LCD 3,5 digit (3999)Max. diameter of measured cable : 55 mmAC current measuring range : 400/2000ADC current measuring range : 400/2000AAC voltage measuring range : 400m/4/40/400/750VDC voltage measuring range : 400m/4/40/400/1000VResistance measuring range : 400/4k/40k/400k/4M/40MΩCapacitance measuring range : 40n/400n/4µ/40µ/100µFFrequency measuring range : 5,12/51,2/512/5,12k/51,2k/
512k/100kHzConform to the norm : EN61010 600V CAT IIIWeight : 565 gDimensions : 275 x 96 x 50 mmPower supply : 1 battery 9V 6F22
:
Standard equipment:test leads
AX-355 Clamp Meters 1000A AC/DC with True RMS and Thermometer
Specifications:
Features:
ljaw opens to Ø30 mm ldiode and continuity test with buzzer lHOLD function llow battery indicator loverrange indicator lauto power off ldisplay with backlightldisplay zeroing function in DC measurements lPeak Hold function ltemperature measurement (°C or °F) lautomatic or manual ranging loverload protection
Display : LCD 3,75 digits (3999) : 41-segment bargraph
DC current : 0,01A...40A / 1000A AC current : 0,01A...40A / 1000A DC voltage : 0,1mV...600V AC voltage : 0,1mV...600V Resistance : 0,1Ω...40MΩ Frequency : 0,001kHz...4kHz Capacitance : 0,001nF...40mF Temperature : -40°C...1000 °C Dimensions : 229 x 80 x 49 mm Weight : 303 g Supply : 9V 6F22 batterySafety : EN-61010-1, Cat. III 600V
test leads set soft carrying casetemperature probe
Standard equipment:
AX-3550 1000A AC True RMS clamp watt meter
Specifications:
Features:
llarge, backlit LCD with bargraphlautoranginglautomatic power-offlHOLD functionlMIN/MAX functionlUSB interfacelmeasures active, reactive and apparent power, power factor and phase anglelmeasures true RMS ACloverload protectionlcontactless voltage detectorl99 measurement memory
Display : LCD 4 digitsAC voltage measuring range : 0,1...100/400/750VAC current measuring range : 0,1...40/100/400/1000AFrequency measuring range : 50...200HzActive power measurement : 0,6...750kWReactive power measurement : 0,6...750kVARApparent power measurement : 0,6...750kVAPower factor measurement : 0,3...1Phase angle measurement : 0...90°Max. diameter of measured cable : 55 mmDimensions : 295 x 100 x 46 mmWeight without batteries : 537 gPower supply : 1 battery 9V 6F22Safety : EN61010 300V CAT IV,
: EN61010 600V CAT III
USB cabletest probes4 crocodile clipssoftwarecasetest leads
Standard equipment:
AX-356 1000A AC/DC Clamp Meters with True RMS and Temperature Measurement
Specifications:
Features:
lauto and manual ranging lautomatic power-off llarge, backlit LCD lHOLD function lMIN/MAX function lPEAK HOLD function ldisplay zero adjustment in DC measurements ldiode and continuity test with buzzer loverflow indicator loverload protection lmeasures true RMS of the current up to 1000A AC lselection of Celsius or Fahrenheit units llow battery indicator
Type of display used LCD 3,75 digit (4000)Max. diameter of measured cable : 52 mmSampling : 2x/sBargraph : 41 segm.DC current measuring range : 0,01...40/400/1000AAC current measuring range : 0,01...40/400/1000ADC voltage measuring range : 0,1m...400m/4/40/400/600VAC voltage measuring range : 0,1m...400m/4/40/400/600VResistance measuring range : 0,1...400/4k/40k/400k/4M/40MΩCapacitance measuring range : 0,001n...4n/40n/400n/4µ/40µ/
400µ/4m/40mFFrequency measuring range : 1...4kHzTemperature measuring range : -20...760°CDiode test : 0,3mA, 3VContinuity test : acoustic signal for R
www.axiomet.eu08
AX-353 600A AC Clamp Meters
Specifications:
Features:
lauto and manual ranging lautomatic power-off lcontinuity test with buzzer ldiode test loverflow indicator llow battery indicator
Display : LCD 3 3/4 digits (3999)Max. diameter of measured cable : 38 mmAC current measuring range : 400/500AAC voltage measuring range : 400m/4/40/400/600VDC voltage measuring range : 400m/4/40/400/600VResistance measuring range : 400/4k/40k/400k/4M/40MΩTemperature measuring range : -20°C...+800°CCapacitance measuring range : 40n/400n/4µ/40µ/100µFFrequency measuring range : 4/40/400/4k/40k/400k/4M/10MHzDuty cycle factor : 0.1...99.9%Conform to the norm : EN61010 600V CAT IIWeight : 357 gDimensions : 190 x 55 x 24 mmPower supply : 3 batteries 3V CR2032
Standard equipment:case test leads
AX-354 AC/DC Clamp Meters up to 1000A
Specifications:
Features:
lautomatic power-off with disable functionlcontinuity test with buzzer lbacklit LCD ldiode test lcable integrity test llow battery indicator
Display : LCD 3 3/4 digits (4000)Max. diameter of measured cable : 38 mmDC current measuring range : 400/1000AAC current measuring range : 400/1000AAC voltage measuring range : 400m/4/40/400/600VDC voltage measuring range : 400m/4/40/400/600VResistance measuring range : 400/4k/40k/400k/4M/40MΩFrequency measuring range : 10/100/1000/10k/100k/1MHzWeight : 150 gDimensions : 190 x 64 x 24 mmPower supply : 3 batteries 3V CR2032Conform to the norm : EN61010 600V CAT II
Standard equipment:case test leads
AX-380 AC/DC Clamp Meters up to 2000A
Specifications:
Features:
lautomatic power-off lHOLD function ldisplay zeroing function in DCA measurements ldiode and continuity test with buzzer llow battery indicator lREL function
Display LCD 3,5 digit (3999)Max. diameter of measured cable : 55 mmAC current measuring range : 400/2000ADC current measuring range : 400/2000AAC voltage measuring range : 400m/4/40/400/750VDC voltage measuring range : 400m/4/40/400/1000VResistance measuring range : 400/4k/40k/400k/4M/40MΩCapacitance measuring range : 40n/400n/4µ/40µ/100µFFrequency measuring range : 5,12/51,2/512/5,12k/51,2k/
512k/100kHzConform to the norm : EN61010 600V CAT IIIWeight : 565 gDimensions : 275 x 96 x 50 mmPower supply : 1 battery 9V 6F22
:
Standard equipment:test leads
AX-355 Clamp Meters 1000A AC/DC with True RMS and Thermometer
Specifications:
Features:
ljaw opens to Ø30 mm ldiode and continuity test with buzzer lHOLD function llow battery indicator loverrange indicator lauto power off ldisplay with backlightldisplay zeroing function in DC measurements lPeak Hold function ltemperature measurement (°C or °F) lautomatic or manual ranging loverload protection
Display : LCD 3,75 digits (3999) : 41-segment bargraph
DC current : 0,01A...40A / 1000A AC current : 0,01A...40A / 1000A DC voltage : 0,1mV...600V AC voltage : 0,1mV...600V Resistance : 0,1Ω...40MΩ Frequency : 0,001kHz...4kHz Capacitance : 0,001nF...40mF Temperature : -40°C...1000 °C Dimensions : 229 x 80 x 49 mm Weight : 303 g Supply : 9V 6F22 batterySafety : EN-61010-1, Cat. III 600V
test leads set soft carrying casetemperature probe
Standard equipment:
AX-3550 1000A AC True RMS clamp watt meter
Specifications:
Features:
llarge, backlit LCD with bargraphlautoranginglautomatic power-offlHOLD functionlMIN/MAX functionlUSB interfacelmeasures active, reactive and apparent power, power factor and phase anglelmeasures true RMS ACloverload protectionlcontactless voltage detectorl99 measurement memory
Display : LCD 4 digitsAC voltage measuring range : 0,1...100/400/750VAC current measuring range : 0,1...40/100/400/1000AFrequency measuring range : 50...200HzActive power measurement : 0,6...750kWReactive power measurement : 0,6...750kVARApparent power measurement : 0,6...750kVAPower factor measurement : 0,3...1Phase angle measurement : 0...90°Max. diameter of measured cable : 55 mmDimensions : 295 x 100 x 46 mmWeight without batteries : 537 gPower supply : 1 battery 9V 6F22Safety : EN61010 300V CAT IV,
: EN61010 600V CAT III
USB cabletest probes4 crocodile clipssoftwarecasetest leads
Standard equipment:
AX-356 1000A AC/DC Clamp Meters with True RMS and Temperature Measurement
Specifications:
Features:
lauto and manual ranging lautomatic power-off llarge, backlit LCD lHOLD function lMIN/MAX function lPEAK HOLD function ldisplay zero adjustment in DC measurements ldiode and continuity test with buzzer loverflow indicator loverload protection lmeasures true RMS of the current up to 1000A AC lselection of Celsius or Fahrenheit units llow battery indicator
Type of display used LCD 3,75 digit (4000)Max. diameter of measured cable : 52 mmSampling : 2x/sBargraph : 41 segm.DC current measuring range : 0,01...40/400/1000AAC current measuring range : 0,01...40/400/1000ADC voltage measuring range : 0,1m...400m/4/40/400/600VAC voltage measuring range : 0,1m...400m/4/40/400/600VResistance measuring range : 0,1...400/4k/40k/400k/4M/40MΩCapacitance measuring range : 0,001n...4n/40n/400n/4µ/40µ/
400µ/4m/40mFFrequency measuring range : 1...4kHzTemperature measuring range : -20...760°CDiode test : 0,3mA, 3VContinuity test : acoustic signal for R
www.axiomet.eu10
AX-6520 Infrared Thermometers with Laser Sight and Display with Backlight
Specifications:
Features:
llaser sight ldual LCD display with backlightlmeasuring range up to 500°C loptical resolution 8:1 lselectable °C and °F lMin/Max/Mean/Rel function lacoustical indication of set lHigh/Low threshold values lHOLD function lTAMB function (ambient temperature measurement) llow battery indicator lauto power off
Display : LCD with backllightTemperature/ : -50°C...+500°CSpectral range : 8-14µm Resolution : 0,2°C Repeatability : ± 1°C or ±1% of readout Accuracy : ±3,5°C or ±2% Typical distance to measured point : up to 1,5m Emissivity : fixed 0,95 Weight: : 196 g (with battery ) Dimensions: : 179 x 162 x 47 mm Supply volt. : 9V 6F22 battery
Standard equipment:
soft carrying case
AX-7520 Infrared Thermometers with Adjustable Emissivity
Specifications:
Features:
llaser sight loptical resolution 12:1 lselectable °C and °F llow battery indicator lHOLD function lMin/Max/Mean/Max-Min function lauto power off after 10 sec. lSocket for mounting on a stand
Display : LCD, white backlight, 4 digits Temperature : -20°C to 537°C
-4°F to +999°F Spectral range : 8 - 14 µm Emissivity : 0,10 to 1,00 resolution 0,01 Dimensions : 162 x 56 x 190 mm Weight : 260 g (with battery ) Supply volt : 9V 6F22 battery
Standard equipment:soft carrying case
AX-7510 Infrared Thermometers with Adjustable Emissivity
Specifications:
Features:
lbacklit LCD lautomatic power-off lHOLD function lMIN/MAX/MEDIUM function laser sight ladjustable emissivity lselection of Celsius or Fahrenheit units llow battery indicator
Display : LCDOptical resolution : 12:1Emissivity value : 0,1...1Non-contact temperature measuring range : -20...550°CNon-contact temperature measuring resolution : 0,1°CWeight : 125 gDimensions : 97 x 43 x 160 mmPower supply : 1 battery 9V
AX-T901 Electrical Testers
Specifications:
Features:
llow impedance testltest RCDs up to 30mAlpolarization indicator
Display : LED bargraph indicating 7 voltage levels
DC voltage measuring range : 6/12/24/50/120/230/400VAC voltage measuring range : 6/12/24/50/120/230/400VBandwidth for AC voltage measurements : 0...60HzSealing : IP64Dimensions : 240 x 78 x 40 mmWeight without batteries : 237 g
Specifications:
Features:
lRCD's test up to 30 mA lpolarisation indicator lAC/DC voltage indicator llow impedance test lphase sequence test lautotest ltorch function lvoltage detection without batterylcontinuity test
Display : bargraph with 8 voltage thresholds
Measurement range : 12/24/36/50/120/230/400 690V AC/DC
Response time : < 0,1 s Continuity test : R < 300 kΩ Input impedance : ≤ 6 kΩ Frequency : 50 Hz / 60 Hz Dimensions : 240 x 78 x 40 mm Weight : 237 g Supply : 1,5V LR03 (AAA), 2 batteries Safety : Cat. III 1000V, Cat. IV 600V Protection degree : IP64
Standard equipment:
test leads set soft carrying case
AX-T902 Appliance Testers
AX-T903 Appliance Testers with LCD Display
Specifications:
Features:
lLCD display with bargraph lphase sequence test lcontinuity test llow impedance test ldisplay with backlightlpolarisation indicator lAC/DC voltage indicator llow battery indicator ltorch function
Display : LCD 3,5 digits (1999) Sampling rate : 2 ~ 3 x / sec. Measurement ranges : 1V...6V/12V/24V/50V/120V/230V
/400V/690V AC/DC Threshold of auto switch on : 4,5 V Input current : ≤ 3 mA at 690 V AC
: ≤ 2,5 mA at 690 V DC Input impedance : ≤ 1 MΩ Continuity test : R < 300 kΩ Dimensions : 240 x 78 x 40 mm Weight : 237 g Supply : 1,5 V LR03 (AAA), 2 batteriesSafety : Cat. III 1000V, Cat. IV 600V Protection degree : IP64
Standard equipment:
test leads set soft carrying case
www.axiomet.eu 11
AX-T2400 Insulation Testers 125/250/500/1000V to 4000Mohm
Specifications:
Features:
llarge, dual LCD with backlight and bargraphlHOLD function (holds measurements result on the display)lMin/Max functionlauto ranginglcontinuity test with buzzerlmeasuring voltage locklovervoltage protectionldisplay zeroing functionlauto power offllow battery indicatorlanti-stroke function (holster)
Display : LCDSampling rate : 2,5 x/sTesting voltage : 1000V for range 1MΩ...4000MΩ
: 500V for range 0,5MΩ...4000MΩ: 250V for range 0,25MΩ...4000MΩ: 125V for range 0,125MΩ...4000MΩ
DC voltage : 1V...1000VAC voltage : 1V...750VResistance : 0,125MΩ...4MΩ, 40MΩ, 400MΩ, 4000MΩContinuity test : acoustic signal for R < 35 ΩDimensions : 200 x 92 x 50 mmWeight : 700 g (with batteries)Supply : 1,5 V LR06 (AA), 6 batteries
Standard equipment:ltest leads setlhard carrying case
AX-TI220 Multimeters with Insulation Resistance Tester to 1kV
Specifications:
Features:
llarge, backlit LCDlauto and manual ranginglautomatic power-offlwide test voltages selectionlHOLD functionlMIN/MAX functionloverload protectionlmeasures frequency, capacitance and temperaturelmeasures true RMS AC/DCldiode and continuity test with buzzer
Test voltage: 50VDC (for 0,05M...50MΩ range): 100VDC (for 0,1M...100MΩ range): 250VDC (for range 0.25M...250MΩ): 500VDC (for range 0.5M...500MΩ): 1000VDC (for range 1M...2GΩ)Insulation resistance measuring ranges /0,5M/1M/10M/100M/2GΩType of display used : LCD (5000)AC voltage measuring range : 0,1m...500m/5/50/500/1000VBandwidth for AC voltage measurements : 40Hz...400HzDC voltage measuring range : 0,1m...500m/5/50/500/1000VAC current measuring range : 0,1µ...500µ/5000µ/50m/500mADC current measuring range : 0,1µ...500µ/5000µ/50m/500mAResistance measuring range : 0,1...500/5k/50k/500k/5M/50MΩCapacitance measuring range : 0,01n...50n/500n/5µ/50µ/500µ/1000µFFrequency measuring range : 0,001...5/2MHzTemperature measuring range : -40...537°CTemperature measurement resolution : 0.1°CDiode test : 0,7mA, 2,5VContinuity test : acoustic signal for R
www.axiomet.eu10
AX-6520 Infrared Thermometers with Laser Sight and Display with Backlight
Specifications:
Features:
llaser sight ldual LCD display with backlightlmeasuring range up to 500°C loptical resolution 8:1 lselectable °C and °F lMin/Max/Mean/Rel function lacoustical indication of set lHigh/Low threshold values lHOLD function lTAMB function (ambient temperature measurement) llow battery indicator lauto power off
Display : LCD with backllightTemperature/ : -50°C...+500°CSpectral range : 8-14µm Resolution : 0,2°C Repeatability : ± 1°C or ±1% of readout Accuracy : ±3,5°C or ±2% Typical distance to measured point : up to 1,5m Emissivity : fixed 0,95 Weight: : 196 g (with battery ) Dimensions: : 179 x 162 x 47 mm Supply volt. : 9V 6F22 battery
Standard equipment:
soft carrying case
AX-7520 Infrared Thermometers with Adjustable Emissivity
Specifications:
Features:
llaser sight loptical resolution 12:1 lselectable °C and °F llow battery indicator lHOLD function lMin/Max/Mean/Max-Min function lauto power off after 10 sec. lSocket for mounting on a stand
Display : LCD, white backlight, 4 digits Temperature : -20°C to 537°C
-4°F to +999°F Spectral range : 8 - 14 µm Emissivity : 0,10 to 1,00 resolution 0,01 Dimensions : 162 x 56 x 190 mm Weight : 260 g (with battery ) Supply volt : 9V 6F22 battery
Standard equipment:soft carrying case
AX-7510 Infrared Thermometers with Adjustable Emissivity
Specifications:
Features:
lbacklit LCD lautomatic power-off lHOLD function lMIN/MAX/MEDIUM function laser sight ladjustable emissivity lselection of Celsius or Fahrenheit units llow battery indicator
Display : LCDOptical resolution : 12:1Emissivity value : 0,1...1Non-contact temperature measuring range : -20...550°CNon-contact temperature measuring resolution : 0,1°CWeight : 125 gDimensions : 97 x 43 x 160 mmPower supply : 1 battery 9V
AX-T901 Electrical Testers
Specifications:
Features:
llow impedance testltest RCDs up to 30mAlpolarization indicator
Display : LED bargraph indicating 7 voltage levels
DC voltage measuring range : 6/12/24/50/120/230/400VAC voltage measuring range : 6/12/24/50/120/230/400VBandwidth for AC voltage measurements : 0...60HzSealing : IP64Dimensions : 240 x 78 x 40 mmWeight without batteries : 237 g
Specifications:
Features:
lRCD's test up to 30 mA lpolarisation indicator lAC/DC voltage indicator llow impedance test lphase sequence test lautotest ltorch function lvoltage detection without batterylcontinuity test
Display : bargraph with 8 voltage thresholds
Measurement range : 12/24/36/50/120/230/400 690V AC/DC
Response time : < 0,1 s Continuity test : R < 300 kΩ Input impedance : ≤ 6 kΩ Frequency : 50 Hz / 60 Hz Dimensions : 240 x 78 x 40 mm Weight : 237 g Supply : 1,5V LR03 (AAA), 2 batteries Safety : Cat. III 1000V, Cat. IV 600V Protection degree : IP64
Standard equipment:
test leads set soft carrying case
AX-T902 Appliance Testers
AX-T903 Appliance Testers with LCD Display
Specifications:
Features:
lLCD display with bargraph lphase sequence test lcontinuity test llow impedance test ldisplay with backlightlpolarisation indicator lAC/DC voltage indicator llow battery indicator ltorch function
Display : LCD 3,5 digits (1999) Sampling rate : 2 ~ 3 x / sec. Measurement ranges : 1V...6V/12V/24V/50V/120V/230V
/400V/690V AC/DC Threshold of auto switch on : 4,5 V Input current : ≤ 3 mA at 690 V AC
: ≤ 2,5 mA at 690 V DC Input impedance : ≤ 1 MΩ Continuity test : R < 300 kΩ Dimensions : 240 x 78 x 40 mm Weight : 237 g Supply : 1,5 V LR03 (AAA), 2 batteriesSafety : Cat. III 1000V, Cat. IV 600V Protection degree : IP64
Standard equipment:
test leads set soft carrying case
www.axiomet.eu 11
AX-T2400 Insulation Testers 125/250/500/1000V to 4000Mohm
Specifications:
Features:
llarge, dual LCD with backlight and bargraphlHOLD function (holds measurements result on the display)lMin/Max functionlauto ranginglcontinuity test with buzzerlmeasuring voltage locklovervoltage protectionldisplay zeroing functionlauto power offllow battery indicatorlanti-stroke function (holster)
Display : LCDSampling rate : 2,5 x/sTesting voltage : 1000V for range 1MΩ...4000MΩ
: 500V for range 0,5MΩ...4000MΩ: 250V for range 0,25MΩ...4000MΩ: 125V for range 0,125MΩ...4000MΩ
DC voltage : 1V...1000VAC voltage : 1V...750VResistance : 0,125MΩ...4MΩ, 40MΩ, 400MΩ, 4000MΩContinuity test : acoustic signal for R < 35 ΩDimensions : 200 x 92 x 50 mmWeight : 700 g (with batteries)Supply : 1,5 V LR06 (AA), 6 batteries
Standard equipment:ltest leads setlhard carrying case
AX-TI220 Multimeters with Insulation Resistance Tester to 1kV
Specifications:
Features:
llarge, backlit LCDlauto and manual ranginglautomatic power-offlwide test voltages selectionlHOLD functionlMIN/MAX functionloverload protectionlmeasures frequency, capacitance and temperaturelmeasures true RMS AC/DCldiode and continuity test with buzzer
Test voltage: 50VDC (for 0,05M...50MΩ range): 100VDC (for 0,1M...100MΩ range): 250VDC (for range 0.25M...250MΩ): 500VDC (for range 0.5M...500MΩ): 1000VDC (for range 1M...2GΩ)Insulation resistance measuring ranges /0,5M/1M/10M/100M/2GΩType of display used : LCD (5000)AC voltage measuring range : 0,1m...500m/5/50/500/1000VBandwidth for AC voltage measurements : 40Hz...400HzDC voltage measuring range : 0,1m...500m/5/50/500/1000VAC current measuring range : 0,1µ...500µ/5000µ/50m/500mADC current measuring range : 0,1µ...500µ/5000µ/50m/500mAResistance measuring range : 0,1...500/5k/50k/500k/5M/50MΩCapacitance measuring range : 0,01n...50n/500n/5µ/50µ/500µ/1000µFFrequency measuring range : 0,001...5/2MHzTemperature measuring range : -40...537°CTemperature measurement resolution : 0.1°CDiode test : 0,7mA, 2,5VContinuity test : acoustic signal for R
Specifications:Display : LCD 3.5" (320x240)Probe diameter : 12 mmCable length : 1 mSealing : IP67Operating temperature : 0...45°CWeight : 405 gDimensions : 270 x 75 x 100 mmPower supply : 4 batteries 1,5V LR6 (AA)
Standard equipment:
USB cable fixtures: mirror, hook, magnet software video cable
www.axiomet.eu12
AX-B250 Video Borescopes with 17mm LCD 3,2" Camera
Specifications:
Features:
LCD 3,2" TFT 320x240 display
pictures and video image taking
video image refresh 30 frames/s
built-in 4 illuminating diodes with the adjustable backlight
pictures and video image record
image rotation function
video output
USB 2.0 interface
date and time tag
auto power off function
Display : LCD 3,2" TFT 320x240Focus range : 5-15cmCable length : 1mCamera diameter : 17mmNumber of colors : 24Video camera format : MPEG4/3GP/AVI/ASFPictures format : JPEG, JPGStorage pictures format : JPG (640x480)Built-in flash memory : 65MSD card : MAX 32GBFlash card : MAX 8GBTV output : PAL/NTSCDimensions : 240 x 100 x 160 mmWeight : 65 g (with battery)Supply : 3,7V,2000mA/h Li battery
Standard equipment:batteryUSB cablechargervideo cable
Optional equipment:
3 meters AX-BC3 cable for video borescope
AX-B100 Borescopes
Specifications:
Features:
linspection cameralUSB interface lbuilt-in LEDs for measurement spot illumination
Probe diameter : 12 mmCable length : 1 mSealing : IP67Operating temperature : 0...45°CWeight : 362 gDimensions : 266 x 73 x 80 mmPower supply : from USB port
Standard equipment:
USB cable fixtures: mirror, hook, magnet video cable
AX-B150 Borescopes
Specifications:
Features:
lUSB interface lbuilt-in LEDs for measurement spot illumination llow battery indicator lTV-Out (NTSC)
Display : LCD 2,4" (320x240)Probe diameter : 12 mmCable length : 1 mSealing : IP67Weight : 360 gDimensions : 266 x 95 x 66 mmPower supply : 4 batteries 1,5V LR6 (AA)
Standard equipment:
USB cable fixtures: mirror, hook, magnet video cable
AX-B350 Borescopes
Features:
lautomatic power-off lUSB interface ldate and time setting possibility lflexible cord lTV-Out (PAL/NTSC) lJPEG, AVI recording format lbuilt-in LEDs for measurement spot illumination ldigital zoom x 4 lbuilt-in 64MB memory
AX-BC3 Extension Cables for AX-B250 Video Borescopes
Features:
lTest accessories type : extension cable for video borescope
lProbe dia. : 17 mmlCable len. : 3 mlApplication : AX-B250
AX-BC6MM-1 Extension Probes for AX-B250 Video Borescopes
Features:
lTest accessories : boroscope probe with cameralApplication : AX-B250lProbe diameter : 6 mmlCable length : 1 m
AX-BC9MM-1 Extension Probes for AX-B250 Video Borescopes
Features:
lTest accessories : boroscope probe with cameralApplication : AX-B250lProbe diameter : 9 mmlCable length : 1 m
www.axiomet.eu 13
TESTER-MS6811 LAN Cable Tester
Specifications:
Features:
l10-LED indicator lUTP, STP cables test lcontinuity and wires configuration test lconnections map test: discontinuity, short circuit, reversed pairs, crossed pairs, separated pairs ldetection of shielded and non-shielded wires ladaptor for carrying out tests by one person llow battery indicator
Measure cables : from 0,4 m to 200 m Dimensions : 125 x 55 x 30 mm Weight : 125 g Supply : 6V 4LR44 battery
Standard equipment:soft carrying case
TESTER-MS6812 Cable Pairs Identificator
Specifications:
Features:
continuity test for cables and wires detection of cable fault place detection of tone signal in cables or wires (telephone lines) identification of telephone line status (free, calling, busy) wire identification in cable by means of sending single, continuous or modulated signal adjustable sensitivity
Transmitter signal frequency : 1,5 kHz Receiver signal frequency : 100...300 kHz Supply voltage : 9V 6F22 battery (delivered separately)
Standard equipment:
soft carrying case
AX-9201 Miniature Temperature Meters
Specifications:
Features:
lautomatic power-offlHOLD functionlMIN/MAX functionlpointed probe made of stainless steelllow battery indicator
Temperature measuring range : -50...150°CTemp. measur. resol. : 0.1°CProbe length : 250 mmWeight without batteries : 51 gPower supply : 1 battery 1,5V LR44
AX-C605 Series Loop Calibrators
Specifications:
Features:
lautomatic power-off ltests in 25% steps and at 100% of signal l24V loop supply voltage llow battery indicator lmeasures 0-20mA current loop
Display : LCD 4,5 digit (19999)DC voltage measuring range : 0...28VVoltage measuring resolution : 1 mV DCDC current measuring range : 0...22mACurrent measuring resolution : 0.001 mAVoltage source : 0...24VCurrent source : 0...22mAOperating temperature : 0...50°CWeight : 550 gDimensions : 180 x 90 x 47 mmPower supply : 2 x 1.5V AA (LR6)
AX-C800 Voltage and Current Calibrators
Specifications:
Features:
measure or simulate voltage in mV and V measure or simulate current in mA and A current readout in mA or % of range power transmitters during test using loop supply 24 V overvoltage protection overload protection
Parameters mV DCMeasurement/simulation : 0 to 100 mV Resolution : 0,01 mV Parameters V DCMeasurement/simulation : 0 to 10 V Resolution : 0,001V Loop supply : 24 V DC ± 10% Parameters mA DCMeasurement/simulation : 0 to 24 mA Resolution : 0,001 mA Supply : R03, 6 batteriesDimensions : 204 x 99 x 46 mm Weight : 460g
Standard equipment:
soft carrying casetest leads set with test tips insulated clips set
AX-TH05 Thermohygrometers
Specifications:
Features:
l3 level psychological comfort indicator (temperature/humidity) llarge double LCD lselection of Celsius or Fahrenheit units
Temperature measuring range : -50...70°CTemperature measurement resolution : 0.1°CHumidity measuring range : 10...99% RHHumidity measuring resolution : 1% RHWeight : 100 gDimensions : 105 x 105 x 15 mmPower supply : 1 battery 1,5V LR03 (AAA)
AX-5001 Temperature Multimeters with Dew-Point
Specifications:
Features:
lLarge LCD display with backlightlHOLD function (holds measurements results on the display)lMin./Max./Med. functionlpossible measurement in Celsius and Fahrenheit degreesldew-point measurementlauto power offllow battery indicator
Display : LCD 4 digits, backlightSampling rate : 1x/sTemperature : 0.1°C, -10...50°C Humidity : 0.1%RH, 0...100%RHDimensions : 121 x 60 x 30 mmWeight : 180 g Supply : 1,5V LR03, 3 batteries (not included)
Standard equipment:hand striphard case
Specifications:Display : LCD 3.5" (320x240)Probe diameter : 12 mmCable length : 1 mSealing : IP67Operating temperature : 0...45°CWeight : 405 gDimensions : 270 x 75 x 100 mmPower supply : 4 batteries 1,5V LR6 (AA)
Standard equipment:
USB cable fixtures: mirror, hook, magnet software video cable
www.axiomet.eu12
AX-B250 Video Borescopes with 17mm LCD 3,2" Camera
Specifications:
Features:
LCD 3,2" TFT 320x240 display
pictures and video image taking
video image refresh 30 frames/s
built-in 4 illuminating diodes with the adjustable backlight
pictures and video image record
image rotation function
video output
USB 2.0 interface
date and time tag
auto power off function
Display : LCD 3,2" TFT 320x240Focus range : 5-15cmCable length : 1mCamera diameter : 17mmNumber of colors : 24Video camera format : MPEG4/3GP/AVI/ASFPictures format : JPEG, JPGStorage pictures format : JPG (640x480)Built-in flash memory : 65MSD card : MAX 32GBFlash card : MAX 8GBTV output : PAL/NTSCDimensions : 240 x 100 x 160 mmWeight : 65 g (with battery)Supply : 3,7V,2000mA/h Li battery
Standard equipment:batteryUSB cablechargervideo cable
Optional equipment:
3 meters AX-BC3 cable for video borescope
AX-B100 Borescopes
Specifications:
Features:
linspection cameralUSB interface lbuilt-in LEDs for measurement spot illumination
Probe diameter : 12 mmCable length : 1 mSealing : IP67Operating temperature : 0...45°CWeight : 362 gDimensions : 266 x 73 x 80 mmPower supply : from USB port
Standard equipment:
USB cable fixtures: mirror, hook, magnet video cable
AX-B150 Borescopes
Specifications:
Features:
lUSB interface lbuilt-in LEDs for measurement spot illumination llow battery indicator lTV-Out (NTSC)
Display : LCD 2,4" (320x240)Probe diameter : 12 mmCable length : 1 mSealing : IP67Weight : 360 gDimensions : 266 x 95 x 66 mmPower supply : 4 batteries 1,5V LR6 (AA)
Standard equipment:
USB cable fixtures: mirror, hook, magnet video cable
AX-B350 Borescopes
Features:
lautomatic power-off lUSB interface ldate and time setting possibility lflexible cord lTV-Out (PAL/NTSC) lJPEG, AVI recording format lbuilt-in LEDs for measurement spot illumination ldigital zoom x 4 lbuilt-in 64MB memory
AX-BC3 Extension Cables for AX-B250 Video Borescopes
Features:
lTest accessories type : extension cable for video borescope
lProbe dia. : 17 mmlCable len. : 3 mlApplication : AX-B250
AX-BC6MM-1 Extension Probes for AX-B250 Video Borescopes
Features:
lTest accessories : boroscope probe with cameralApplication : AX-B250lProbe diameter : 6 mmlCable length : 1 m
AX-BC9MM-1 Extension Probes for AX-B250 Video Borescopes
Features:
lTest accessories : boroscope probe with cameralApplication : AX-B250lProbe diameter : 9 mmlCable length : 1 m
www.axiomet.eu 13
TESTER-MS6811 LAN Cable Tester
Specifications:
Features:
l10-LED indicator lUTP, STP cables test lcontinuity and wires configuration test lconnections map test: discontinuity, short circuit, reversed pairs, crossed pairs, separated pairs ldetection of shielded and non-shielded wires ladaptor for carrying out tests by one person llow battery indicator
Measure cables : from 0,4 m to 200 m Dimensions : 125 x 55 x 30 mm Weight : 125 g Supply : 6V 4LR44 battery
Standard equipment:soft carrying case
TESTER-MS6812 Cable Pairs Identificator
Specifications:
Features:
continuity test for cables and wires detection of cable fault place detection of tone signal in cables or wires (telephone lines) identification of telephone line status (free, calling, busy) wire identification in cable by means of sending single, continuous or modulated signal adjustable sensitivity
Transmitter signal frequency : 1,5 kHz Receiver signal frequency : 100...300 kHz Supply voltage : 9V 6F22 battery (delivered separately)
Standard equipment:
soft carrying case
AX-9201 Miniature Temperature Meters
Specifications:
Features:
lautomatic power-offlHOLD functionlMIN/MAX functionlpointed probe made of stainless steelllow battery indicator
Temperature measuring range : -50...150°CTemp. measur. resol. : 0.1°CProbe length : 250 mmWeight without batteries : 51 gPower supply : 1 battery 1,5V LR44
AX-C605 Series Loop Calibrators
Specifications:
Features:
lautomatic power-off ltests in 25% steps and at 100% of signal l24V loop supply voltage llow battery indicator lmeasures 0-20mA current loop
Display : LCD 4,5 digit (19999)DC voltage measuring range : 0...28VVoltage measuring resolution : 1 mV DCDC current measuring range : 0...22mACurrent measuring resolution : 0.001 mAVoltage source : 0...24VCurrent source : 0...22mAOperating temperature : 0...50°CWeight : 550 gDimensions : 180 x 90 x 47 mmPower supply : 2 x 1.5V AA (LR6)
AX-C800 Voltage and Current Calibrators
Specifications:
Features:
measure or simulate voltage in mV and V measure or simulate current in mA and A current readout in mA or % of range power transmitters during test using loop supply 24 V overvoltage protection overload protection
Parameters mV DCMeasurement/simulation : 0 to 100 mV Resolution : 0,01 mV Parameters V DCMeasurement/simulation : 0 to 10 V Resolution : 0,001V Loop supply : 24 V DC ± 10% Parameters mA DCMeasurement/simulation : 0 to 24 mA Resolution : 0,001 mA Supply : R03, 6 batteriesDimensions : 204 x 99 x 46 mm Weight : 460g
Standard equipment:
soft carrying casetest leads set with test tips insulated clips set
AX-TH05 Thermohygrometers
Specifications:
Features:
l3 level psychological comfort indicator (temperature/humidity) llarge double LCD lselection of Celsius or Fahrenheit units
Temperature measuring range : -50...70°CTemperature measurement resolution : 0.1°CHumidity measuring range : 10...99% RHHumidity measuring resolution : 1% RHWeight : 100 gDimensions : 105 x 105 x 15 mmPower supply : 1 battery 1,5V LR03 (AAA)
AX-5001 Temperature Multimeters with Dew-Point
Specifications:
Features:
lLarge LCD display with backlightlHOLD function (holds measurements results on the display)lMin./Max./Med. functionlpossible measurement in Celsius and Fahrenheit degreesldew-point measurementlauto power offllow battery indicator
Display : LCD 4 digits, backlightSampling rate : 1x/sTemperature : 0.1°C, -10...50°C Humidity : 0.1%RH, 0...100%RHDimensions : 121 x 60 x 30 mmWeight : 180 g Supply : 1,5V LR03, 3 batteries (not included)
Standard equipment:hand striphard case
www.axiomet.eu14
AX-5002 Pyrometers with Embedded Temperature Meter
Specifications:
Features:
llarge LCD display with backlightlcontact or non-contact temperature measurementllaser indicatorlHOLD function (holds measurements results on the display)lMin./Max/Med. functionlpossibility of measurement in Celsius or Fahrenheit degreeslauto power offllow battery indicator
Display : LCD 4 digitsTemperature (probe) : 0.1°C, -200...1300°CTemperature (non-contact) : 0.1°C, -50...300°COptical resolution : 2:1Emissivity : fixed 0,95Dimensions : 121 x 60 x 30 mmWeight : 180 g Supply : 1,5V LR03, 3 batteries (not included)Weight : 180 g Supply : 1,5V LR03, 3 batteries (not included)
Standard equipment:hand striphard caseK-type temperature probe with ball tip
AX-5003 Two-Channel Temperature Meters with Range -200/+1300°C
Specifications:
Features:
llarge LCD with backlightlpossibility of two numeral measurements displayltemperature difference measurementlHOLD function (holds measurements results on the display)lMin./Max. functionlprogrammable alarm thresholds Min./Max.lpossibility of measurement in Celsius or Fahrenheit degreeslauto power offllow battery indicator
Display : LCD 4 digitsSampling rate : 1x/sTemperature (K-type thermocouple) : 0.1°C, -200...1300°CTemperature (J-type thermocouple) : 0.1°C, -200...1200°CDimensions : 121 x 60 x 30 mmWeight : 180 g Supply : 1,5V LR03, 3 batteries
(not included)
Standard equipment:hand striphard casetwo K-type probes with ball tip
AX-DT100 Temperature and Humidity Recorders 32700 Samples
Specifications:
Features:
lLCD display with date and time taglhumidity and temperature value recordlsampling time from 1s to 24 hrs record lMin/Max functionlmeasurement in Celsius and Fahrenheit degreeslmemory filling taglalarm function with alarm level controllUSB interface
Display : LCDTemperature measurement : 0.1°...-40°C to +70°CHumidity measurement : 0.1%...0 to 100%RHMemory : 32700 cellsMeasurement cycle : 1s to 24hDesired software : 2000/XP/VistaDimensions : 94 x 48 x 33 mmWeight : 115 gSupply : 3.6V battery
AX-C830 Thermocouple Calibrators Type J,K,T,E,R,S,B,N
Specifications:
Features:
llarge LCD with backlightlhigh precisionlmeasurement and simulationlcooperates with 8 thermocoupletypes J,K,T,E,R,S,B,Nlmeasurement in Celsius or Fahrenheitlanti-shock housinglsocket enabling supply connection
Display : LCD 5 digitsDC voltage : -10mV...75mVT-type thermocouple measure. range : -200...400°CS-type thermocouple measure. range : -20...1750°CN-type thermocouple measure. range : -250...1300°CR-type thermocouple measure. range : -20...1750°CK-type thermocouple measure. range : -200...1370°CJ-type thermocouple measure. range : -200...1200°CE-type thermocouple measure. range : -200...950°CDimensions : 205 x 98 x 46 mmWeight : 472gSupply : 1,5V LR03, 6 batteries
(not included)
Standard equipment:soft case2x thermocouple K-type pin
AX-CO2-1 Temperature, Humidity and CO2 Meters
Specifications:
Features:
l3 level psychological comfort indicator (temperature/humidity) lacoustic and optical alarm lHOLD function lMIN/MAX function lUSB interface ldate and time setting possibility lbacklit LCD with bargraph lholder for wall mounting or desktop placing loverflow indicator lselection of Celsius or Fahrenheit units lrelay output
Internal temperature measuring range : -20...50°CHumidity measuring range : 0...100% RHMeasuring range : 300...3000ppm ( CO2)Sealing : IP40Dimensions : 125 x 85 x 30 mmPower supply : 5 V DC
AX-PH01 pH and Temperature Sensors
Specifications:
Features:
lautomatic power-off lHOLD function lsimulataneously measures pH and temperature l3-point pH buffers calibration (4, 6.8, 9.1)
Display : double LCDMeasuring range : 0...14pHMeasuring resolution : 0,01pHMeasurement accuracy : ±0,1pHTemperature measuring range : 0...50°CTemperature measurement accuracy : ±0,5°CTemperature measurement resolution : 0.1°CWeight : 100 gDimensions : 188 x 38 mmPower supply : 4 batteries 1,5V LR03 (AAA)
www.axiomet.eu 15
AX-C850 Calibrators for RTD Sensors
Specifications:
Features:
large, easy-to-read display LCDcalibration of Pt10 (385), 50, 100, 200, 500, 1000, Pt100 (JIS) thermocouples selectable °C or °F measurement method 2, 3 or 4-wire
Ω Measurement and SimulationRange : 0 Ω - 3200 Ω Resolution : 0,01 Ω (measurement)
: 0,1 Ω (simulation) RTD Measurement and SimulationRange : -200°C to 800°C Resolution : 0,1°C/°F Notes : Pt10 (385)
: Pt50 (385): Pt100 (385)
Range : -200°C to 630°C Resolution : 0,1°C/°F Thermocouples : Pt200 (385)
: Pt500 (385): Pt1000 (385): Pt100 (JIS)
Max voltage : 30V Operating temperature : -10°C to 55°C Supply : 1,5V, 6 batteries Dimensions : 205 x 98 x 46 mm Weight : 472 g
Standard equipment:
soft carrying case2 measuring leads sets1 insulated clips set
AX-2901 Optical-Mechanical Tachometers
Specifications:
Features:
optically measure rotational speed in RPM optically determine distance 5 cm – 20 cm mechanically measure rotational and linear speed auto ranging measurements memory: Max/Min/Last low battery indicator set of replaceable measuring adaptors for various applications
Display : LCD 5 digits (99999 max) Sampling rate : 1sec. Optically measure rotational speedRange : 6 – 99999 RPM Mechanically measure rotational speed (contact method) Range : 1 – 19999 RPM Mechanically measure linear speedRange : 0,1 – 1999,9 RPM
: 0,3 – 6560 feet/min Dimensions : 217 x 84 x 43 mm Weight : 265 g (with batteries) Supply : 1,5 V type LR6, 4 batteries (not included)
Standard equipment:
hard case reflective tape 200 mm longset of measurement adaptors (circular 32mm of diameter, conical, funnel-type)
AX-L230 Luxmeters, up to 400k Lux
Specifications:
Features:
large, LCD display with backlight, 3,75 digits with 41-segment bargraphLux or Fc measurement units Peak value measurement optionHOLD function (holds measurement result on display)Max/Min value measurementrelative measurement (for illumination changes recording)cosine and color compensation conforms to CIE photopic spectral responsemeasurement adaptor with 1m cableprotective holster
Display : LCD, 3,75 digits (3999): 41-segment bargraph
Measurement ranges : 40lx/400lx/4klx/40klx/400klx: 40fc/400fc/4000fc/40kfc
Resolution : 0,01 lx/0,01fcSpectral accuracy : CIE Vλ function f1≤6%Cosine response : f2' ≤ 2%Dimensions : 203 x 75 x 50 mmWeight : 280 gSupply : 9V 6F22 battery
AX-DG2010AF Function Generators
Specifications:
Features:
arbitrary waveformwaveforms: sine, rectangle, ramp, pulse, noisemodulation - AM, FM, PM, ASK, FSK, PSKUSB interface
Rectangular waveform parameters rise/fall time :
www.axiomet.eu14
AX-5002 Pyrometers with Embedded Temperature Meter
Specifications:
Features:
llarge LCD display with backlightlcontact or non-contact temperature measurementllaser indicatorlHOLD function (holds measurements results on the display)lMin./Max/Med. functionlpossibility of measurement in Celsius or Fahrenheit degreeslauto power offllow battery indicator
Display : LCD 4 digitsTemperature (probe) : 0.1°C, -200...1300°CTemperature (non-contact) : 0.1°C, -50...300°COptical resolution : 2:1Emissivity : fixed 0,95Dimensions : 121 x 60 x 30 mmWeight : 180 g Supply : 1,5V LR03, 3 batteries (not included)Weight : 180 g Supply : 1,5V LR03, 3 batteries (not included)
Standard equipment:hand striphard caseK-type temperature probe with ball tip
AX-5003 Two-Channel Temperature Meters with Range -200/+1300°C
Specifications:
Features:
llarge LCD with backlightlpossibility of two numeral measurements displayltemperature difference measurementlHOLD function (holds measurements results on the display)lMin./Max. functionlprogrammable alarm thresholds Min./Max.lpossibility of measurement in Celsius or Fahrenheit degreeslauto power offllow battery indicator
Display : LCD 4 digitsSampling rate : 1x/sTemperature (K-type thermocouple) : 0.1°C, -200...1300°CTemperature (J-type thermocouple) : 0.1°C, -200...1200°CDimensions : 121 x 60 x 30 mmWeight : 180 g Supply : 1,5V LR03, 3 batteries
(not included)
Standard equipment:hand striphard casetwo K-type probes with ball tip
AX-DT100 Temperature and Humidity Recorders 32700 Samples
Specifications:
Features:
lLCD display with date and time taglhumidity and temperature value recordlsampling time from 1s to 24 hrs record lMin/Max functionlmeasurement in Celsius and Fahrenheit degreeslmemory filling taglalarm function with alarm level controllUSB interface
Display : LCDTemperature measurement : 0.1°...-40°C to +70°CHumidity measurement : 0.1%...0 to 100%RHMemory : 32700 cellsMeasurement cycle : 1s to 24hDesired software : 2000/XP/VistaDimensions : 94 x 48 x 33 mmWeight : 115 gSupply : 3.6V battery
AX-C830 Thermocouple Calibrators Type J,K,T,E,R,S,B,N
Specifications:
Features:
llarge LCD with backlightlhigh precisionlmeasurement and simulationlcooperates with 8 thermocoupletypes J,K,T,E,R,S,B,Nlmeasurement in Celsius or Fahrenheitlanti-shock housinglsocket enabling supply connection
Display : LCD 5 digitsDC voltage : -10mV...75mVT-type thermocouple measure. range : -200...400°CS-type thermocouple measure. range : -20...1750°CN-type thermocouple measure. range : -250...1300°CR-type thermocouple measure. range : -20...1750°CK-type thermocouple measure. range : -200...1370°CJ-type thermocouple measure. range : -200...1200°CE-type thermocouple measure. range : -200...950°CDimensions : 205 x 98 x 46 mmWeight : 472gSupply : 1,5V LR03, 6 batteries
(not included)
Standard equipment:soft case2x thermocouple K-type pin
AX-CO2-1 Temperature, Humidity and CO2 Meters
Specifications:
Features:
l3 level psychological comfort indicator (temperature/humidity) lacoustic and optical alarm lHOLD function lMIN/MAX function lUSB interface ldate and time setting possibility lbacklit LCD with bargraph lholder for wall mounting or desktop placing loverflow indicator lselection of Celsius or Fahrenheit units lrelay output
Internal temperature measuring range : -20...50°CHumidity measuring range : 0...100% RHMeasuring range : 300...3000ppm ( CO2)Sealing : IP40Dimensions : 125 x 85 x 30 mmPower supply : 5 V DC
AX-PH01 pH and Temperature Sensors
Specifications:
Features:
lautomatic power-off lHOLD function lsimulataneously measures pH and temperature l3-point pH buffers calibration (4, 6.8, 9.1)
Display : double LCDMeasuring range : 0...14pHMeasuring resolution : 0,01pHMeasurement accuracy : ±0,1pHTemperature measuring range : 0...50°CTemperature measurement accuracy : ±0,5°CTemperature measurement resolution : 0.1°CWeight : 100 gDimensions : 188 x 38 mmPower supply : 4 batteries 1,5V LR03 (AAA)
www.axiomet.eu 15
AX-C850 Calibrators for RTD Sensors
Specifications:
Features:
large, easy-to-read display LCDcalibration of Pt10 (385), 50, 100, 200, 500, 1000, Pt100 (JIS) thermocouples selectable °C or °F measurement method 2, 3 or 4-wire
Ω Measurement and SimulationRange : 0 Ω - 3200 Ω Resolution : 0,01 Ω (measurement)
: 0,1 Ω (simulation) RTD Measurement and SimulationRange : -200°C to 800°C Resolution : 0,1°C/°F Notes : Pt10 (385)
: Pt50 (385): Pt100 (385)
Range : -200°C to 630°C Resolution : 0,1°C/°F Thermocouples : Pt200 (385)
: Pt500 (385): Pt1000 (385): Pt100 (JIS)
Max voltage : 30V Operating temperature : -10°C to 55°C Supply : 1,5V, 6 batteries Dimensions : 205 x 98 x 46 mm Weight : 472 g
Standard equipment:
soft carrying case2 measuring leads sets1 insulated clips set
AX-2901 Optical-Mechanical Tachometers
Specifications:
Features:
optically measure rotational speed in RPM optically determine distance 5 cm – 20 cm mechanically measure rotational and linear speed auto ranging measurements memory: Max/Min/Last low battery indicator set of replaceable measuring adaptors for various applications
Display : LCD 5 digits (99999 max) Sampling rate : 1sec. Optically measure rotational speedRange : 6 – 99999 RPM Mechanically measure rotational speed (contact method) Range : 1 – 19999 RPM Mechanically measure linear speedRange : 0,1 – 1999,9 RPM
: 0,3 – 6560 feet/min Dimensions : 217 x 84 x 43 mm Weight : 265 g (with batteries) Supply : 1,5 V type LR6, 4 batteries (not included)
Standard equipment:
hard case reflective tape 200 mm longset of measurement adaptors (circular 32mm of diameter, conical, funnel-type)
AX-L230 Luxmeters, up to 400k Lux
Specifications:
Features:
large, LCD display with backlight, 3,75 digits with 41-segment bargraphLux or Fc measurement units Peak value measurement optionHOLD function (holds measurement result on display)Max/Min value measurementrelative measurement (for illumination changes recording)cosine and color compensation conforms to CIE photopic spectral responsemeasurement adaptor with 1m cableprotective holster
Display : LCD, 3,75 digits (3999): 41-segment bargraph
Measurement ranges : 40lx/400lx/4klx/40klx/400klx: 40fc/400fc/4000fc/40kfc
Resolution : 0,01 lx/0,01fcSpectral accuracy : CIE Vλ function f1≤6%Cosine response : f2' ≤ 2%Dimensions : 203 x 75 x 50 mmWeight : 280 gSupply : 9V 6F22 battery
AX-DG2010AF Function Generators
Specifications:
Features:
arbitrary waveformwaveforms: sine, rectangle, ramp, pulse, noisemodulation - AM, FM, PM, ASK, FSK, PSKUSB interface
Rectangular waveform parameters rise/fall time :
www.axiomet.eu16
Specifications:Features:
digital filter function Holdoff function: 100ns...1,5s Pass/Fail function value averaging function with maximal 256 runs colour LCD with adjustable contrast mathematical functions: addition, subtraction, division, multiplication and FFT measurements by means of cursors displays input waveform and FFT on divided screen records input waveform trigger modes: slope (negative, positive), impulse width, video signal integrated FFT with algorithm selection: Hamming, Hanning, Blackman, Rectangular memory for 20 settings colour 7" LCD with contrast regulation 20 measurement memoryRS232 interfaceUSB interface
Standard equipment:2 voltage probes with 1:1/10:1 divider USB cable software
Band : ≤100MHzType of display used : LCD 7" (480x234)Sampling : 1Gsps (in real time),
: 50Gsps (in equivalent time)Number of channels : 2Interface : RS232; USBInput impedance : 1MΩ/14pFInput sensitivity : 2mV/div...10V/divInput coupling : AC, DC, GNDTrigger source : CH1, CH2, external signal, supply
voltage sourceTrigger modes : automatic, normal, singleTrigger coupling : AC, DC, lowpass, highpassHorizontal accuracy : ±0.01%Time base : 2,5n...50s/divMax. input voltage : 400 VVertical resolution : 8 bitMemory record length : 1Mpts/chRise time : 3,5nsSampling : 1Gsps (in real time),
: 50Gsps (in equivalent time)Weight : 2.4 kgPower supply : 100...240VAC, 45...440HzOverall dimensions (W x D x H) : 399 x 110.5 x 148.5 mm
AX-DS1100CFM Digital Oscilloscopes with 7" LCD
AX-DS1022C7 Digital Oscilloscopes
Features:automatically measures 32 parameters digital filter function value averaging function with maximal 256 runs colour LCD with adjustable contrast mathematical functions: addition, subtraction, division, multiplication and FFT measurements by means of cursors X-Y operation mode displays input waveform and FFT on divided screen records input waveform trigger modes: slope (negative, positive), impulse width, video signal integrated FFT with algorithm selection: Hamming, Hanning, Blackman, Rectangular memory for 20 settingsRS232 interface USB interface
Standard equipment:
2 voltage probes with 1:1/10:1 divider USB cable software
Specifications: Features:
l2 LCD displays 2 x 3,5 digits lprecise adjustment of current and voltage lshort-circuit protection loverload protection lprotection against connection to the PSU's output a voltage with reverse polarisation lsimultaneous readouts of voltage and current lefficient current and voltage regulation factor
Display : LCD 2 x 3,5 digits Output voltage DC : 0-18 VOutput current DC : 0-3 ALine regulation : ≤0,01% ±1 mVLoad regulation : ≤0,2% ±1 mANoise and ripple : ≤1 mVrmsMains supply : 230 V AC ± 10%Dimensions : 206 x 153 x 106 mmWeight : about 4 kg
AX-1803D Low Power Laboratory Power Supply Units (PSU)
Specifications:
Features:
lsimultaneous voltage and current readoutlvoltage and current stepless adjustmentloverload protectionlcoarse and precise voltage and current adjustment
Display : 2x LCD 3 digitsNumber of channels : 1Output voltage : 0...30 V DCOutput current : 0...5 AVoltage stabilisation : ≤1% + 10mVCurrent stabilisation : ≤1% + 5mAVoltage (regulated) ripple and noise : ≤100mVp-pDimensions : 80 x 160 x 205 mmWeight : 1.5 kgPower supply : 230VAC 50/60Hz
AX-3005DS 1 Channel Adjustable Power Supplies
AX-3005D-1 Single Output Laboratory Power Supply with LCD
Features:
l2 LEDslcooled by temperature-controlled fanlsimultaneous voltage and current readoutlvoltage and current stepless adjustmentlconstant voltage or constant current operationloverload protectionlshort circuit protectionlprotection against connection of reverse polarisation voltage to the PSU outputlcoarse and precise voltage and current adjustmentlmemory for 4 settings
Specifications:Display : 2x LED 4 digitsNumber of channels : 1Output voltage : 0...30 V DCOutput voltage resolution : 10 mVOutput current : 0...5 AOutput current resolution : 1 mAVoltage stabilisation : ≤0,01% + 2mVCurrent stabilisation : ≤0,1% ± 10mADimensions : 110 x 156 x 260 mmWeight : 4.5 kgPower supply : 100...240V 50/60Hz
Standard equipment:
lmains cable
www.axiomet.eu 17
Specifications:Band : ≤25MHzDisplay : LCD 7" (480x234)Number of channels : 2Input impedance : 1MΩ/17pFInput coupling : AC, DC, GNDTrigger source : CH1, CH2, external signal,
: supply voltage sourceTrigger modes : automatic, normal, singleTrigger coupling : AC, DC, lowpass, highpassInput sensitivity : 2mV/div...5V/divTime base : 25n...50s/divMax. input voltage : 400 VVertical resolution : 8 bitMemory record length : 32kptsRise time : 14nsSampling : 500Msps (in real time),
: 50Gsps (in equivalent time)Weight : 2.5 kgPower supply : 100...240VAC 50/60HzOverall dimensions (W x D x H) : 323 x 135 x 157 mm
AX-DS1062CFM Digital Oscilloscopes with 7" Display
Specifications:
Features:
7" colour display with contrast regulation2 channelssampling rate to 1GSa/sautomatic measurement of 32 parametersmemory of runs to 2Mptsmeasurement with cursorsmathematic and FFT functionstripping kinds with slope (accruing, descending), with impulse width, with video signalmemory of runs and settingsUSB interface
Standard equipment:2 voltage probes with 1:1/10:1 divider USB cable software
Band : ≤60MHz; ≤40MHzDisplay : LCD 7"(480x234)Number of channels : 2Memory : 2Mpts.Input impedance : 1MΩ/14pFInput coupling : AC, DC, GNDTripping source : CH1, CH2, external signal supply sourceTripping modes : automatic, regular, singleTripping coupling : AC, DC, low-pass, high-passTime base : 5...50s/div.; 10n...50s/div.Input voltage max [V] : 400Vertical resolution [lines] : 8Accrual time : 5,8ns; 8,8nsSampling rate : 1GSa/s (in real time); 500MSa/s (in real time)
: 50GSa/s (in equivalent time): 25GSa/s (in equivalent time)
Weight [kg] : 2,4Supply : 100...240VACDimensions : 148,5x399x110,5
AX-6002P Programmable Power Supply Units
Features:lcooled by temperature-controlled fanlRS232 interfacelUSB interfacelsimultaneous voltage and current readoutlvoltage and current stepless adjustmentlconstant voltage or constant current operationloverload protectionlovervoltage protectionlprotection against connection of reverse polarisation voltage to the PSU outputldouble LEDlmemory for 4 settings
Specifications:Display : 2x LED 4 digitsNumber of channels : 1Output voltage : 0...60 V DCOutput voltage resolution : 10 mVOutput current : 0...2 AOutput current resolution : 1 mAVoltage stabilisation : ≤0,01% + 2mVCurrent stabilisation : ≤0,1% + 5mAVoltage (regulated) ripple and noise : ≤1mVrmsDimensions : 98 x 193 x 215 mmWeight : 3 kgPower supply : 100...240V 50/60HzPollution degree : 2
Standard equipment:
lUSB cablelsoftwarelmains cable
AX-3005DS, AX-3010DS 1 Channel Adjustable SwitchingPower Supplies
Specifications:
Features:
lsimultaneous voltage and current readout lvoltage and current stepless adjustmentloverload protectionlcoarse and precise voltage and current adjustment
Display : 2x LCD 3 digitsNumber of channels : 1Current stabilisation : ≤1% + 5mAVoltage stabilisation : ≤1% + 10mVVoltage (regulated) ripple and noise : ≤200mVp-pWeight : 1:.5 kgDimensions : 85 x 160 x 205 mmPower supply : 230 V AC 50/60 Hz
Symbol Output voltage Output current[V DC] [A]
AX-3005DS 0...30 0...5AX-3010DS 0...30 0...10
AX-3005DLS Single Channel Linear Power Supplies
Specifications:
Features:
lsimultaneous voltage and current readout lvoltage and current stepless adjustment loverload protection lcoarse and precise voltage and current adjustment
Display : 2x LCD 4 digitsNumber of channels : 1Output voltage : 0...30 V DCOutput current : 0...5 AVoltage stabilisation : ≤0,01% + 5mVVoltage (regulated) ripple and noise : ≤1mVp-pDimensions : 85 x 160 x 260 mmPower supply : 110/230V 50/60Hz
www.axiomet.eu16
Specifications:Features:
digital filter function Holdoff function: 100ns...1,5s Pass/Fail function value averaging function with maximal 256 runs colour LCD with adjustable contrast mathematical functions: addition, subtraction, division, multiplication and FFT measurements by means of cursors displays input waveform and FFT on divided screen records input waveform trigger modes: slope (negative, positive), impulse width, video signal integrated FFT with algorithm selection: Hamming, Hanning, Blackman, Rectangular memory for 20 settings colour 7" LCD with contrast regulation 20 measurement memoryRS232 interfaceUSB interface
Standard equipment:2 voltage probes with 1:1/10:1 divider USB cable software
Band : ≤100MHzType of display used : LCD 7" (480x234)Sampling : 1Gsps (in real time),
: 50Gsps (in equivalent time)Number of channels : 2Interface : RS232; USBInput impedance : 1MΩ/14pFInput sensitivity : 2mV/div...10V/divInput coupling : AC, DC, GNDTrigger source : CH1, CH2, external signal, supply
voltage sourceTrigger modes : automatic, normal, singleTrigger coupling : AC, DC, lowpass, highpassHorizontal accuracy : ±0.01%Time base : 2,5n...50s/divMax. input voltage : 400 VVertical resolution : 8 bitMemory record length : 1Mpts/chRise time : 3,5nsSampling : 1Gsps (in real time),
: 50Gsps (in equivalent time)Weight : 2.4 kgPower supply : 100...240VAC, 45...440HzOverall dimensions (W x D x H) : 399 x 110.5 x 148.5 mm
AX-DS1100CFM Digital Oscilloscopes with 7" LCD
AX-DS1022C7 Digital Oscilloscopes
Features:automatically measures 32 parameters digital filter function value averaging function with maximal 256 runs colour LCD with adjustable contrast mathematical functions: addition, subtraction, division, multiplication and FFT measurements by means of cursors X-Y operation mode displays input waveform and FFT on divided screen records input waveform trigger modes: slope (negative, positive), impulse width, video signal integrated FFT with algorithm selection: Hamming, Hanning, Blackman, Rectangular memory for 20 settingsRS232 interface USB interface
Standard equipment:
2 voltage probes with 1:1/10:1 divider USB cable software
Specifications: Features:
l2 LCD displays 2 x 3,5 digits lprecise adjustment of current and voltage lshort-circuit protection loverload protection lprotection against connection to the PSU's output a voltage with reverse polarisation lsimultaneous readouts of voltage and current lefficient current and voltage regulation factor
Display : LCD 2 x 3,5 digits Output voltage DC : 0-18 VOutput current DC : 0-3 ALine regulation : ≤0,01% ±1 mVLoad regulation : ≤0,2% ±1 mANoise and ripple : ≤1 mVrmsMains supply : 230 V AC ± 10%Dimensions : 206 x 153 x 106 mmWeight : about 4 kg
AX-1803D Low Power Laboratory Power Supply Units (PSU)
Specifications:
Features:
lsimultaneous voltage and current readoutlvoltage and current stepless adjustmentloverload protectionlcoarse and precise voltage and current adjustment
Display : 2x LCD 3 digitsNumber of channels : 1Output voltage : 0...30 V DCOutput current : 0...5 AVoltage stabilisation : ≤1% + 10mVCurrent stabilisation : ≤1% + 5mAVoltage (regulated) ripple and noise : ≤100mVp-pDimensions : 80 x 160 x 205 mmWeight : 1.5 kgPower supply : 230VAC 50/60Hz
AX-3005DS 1 Channel Adjustable Power Supplies
AX-3005D-1 Single Output Laboratory Power Supply with LCD
Features:
l2 LEDslcooled by temperature-controlled fanlsimultaneous voltage and current readoutlvoltage and current stepless adjustmentlconstant voltage or constant current operationloverload protectionlshort circuit protectionlprotection against connection of reverse polarisation voltage to the PSU outputlcoarse and precise voltage and current adjustmentlmemory for 4 settings
Specifications:Display : 2x LED 4 digitsNumber of channels : 1Output voltage : 0...30 V DCOutput voltage resolution : 10 mVOutput current : 0...5 AOutput current resolution : 1 mAVoltage stabilisation : ≤0,01% + 2mVCurrent stabilisation : ≤0,1% ± 10mADimensions : 110 x 156 x 260 mmWeight : 4.5 kgPower supply : 100...240V 50/60Hz
Standard equipment:
lmains cable
www.axiomet.eu 17
Specifications:Band : ≤25MHzDisplay : LCD 7" (480x234)Number of channels : 2Input impedance : 1MΩ/17pFInput coupling : AC, DC, GNDTrigger source : CH1, CH2, external signal,
: supply voltage sourceTrigger modes : automatic, normal, singleTrigger coupling : AC, DC, lowpass, highpassInput sensitivity : 2mV/div...5V/divTime base : 25n...50s/divMax. input voltage : 400 VVertical resolution : 8 bitMemory record length : 32kptsRise time : 14nsSampling : 500Msps (in real time),
: 50Gsps (in equivalent time)Weight : 2.5 kgPower supply : 100...240VAC 50/60HzOverall dimensions (W x D x H) : 323 x 135 x 157 mm
AX-DS1062CFM Digital Oscilloscopes with 7" Display
Specifications:
Features:
7" colour display with contrast regulation2 channelssampling rate to 1GSa/sautomatic measurement of 32 parametersmemory of runs to 2Mptsmeasurement with cursorsmathematic and FFT functionstripping kinds with slope (accruing, descending), with impulse width, with video signalmemory of runs and settingsUSB interface
Standard equipment:2 voltage probes with 1:1/10:1 divider USB cable software
Band : ≤60MHz; ≤40MHzDisplay : LCD 7"(480x234)Number of channels : 2Memory : 2Mpts.Input impedance : 1MΩ/14pFInput coupling : AC, DC, GNDTripping source : CH1, CH2, external signal supply sourceTripping modes : automatic, regular, singleTripping coupling : AC, DC, low-pass, high-passTime base : 5...50s/div.; 10n...50s/div.Input voltage max [V] : 400Vertical resolution [lines] : 8Accrual time : 5,8ns; 8,8nsSampling rate : 1GSa/s (in real time); 500MSa/s (in real time)
: 50GSa/s (in equivalent time): 25GSa/s (in equivalent time)
Weight [kg] : 2,4Supply : 100...240VACDimensions : 148,5x399x110,5
AX-6002P Programmable Power Supply Units
Features:lcooled by temperature-controlled fanlRS232 interfacelUSB interfacelsimultaneous voltage and current readoutlvoltage and current stepless adjustmentlconstant voltage or constant current operationloverload protectionlovervoltage protectionlprotection against connection of reverse polarisation voltage to the PSU outputldouble LEDlmemory for 4 settings
Specifications:Display : 2x LED 4 digitsNumber of channels : 1Output voltage : 0...60 V DCOutput voltage resolution : 10 mVOutput current : 0...2 AOutput current resolution : 1 mAVoltage stabilisation : ≤0,01% + 2mVCurrent stabilisation : ≤0,1% + 5mAVoltage (regulated) ripple and noise : ≤1mVrmsDimensions : 98 x 193 x 215 mmWeight : 3 kgPower supply : 100...240V 50/60HzPollution degree : 2
Standard equipment:
lUSB cablelsoftwarelmains cable
AX-3005DS, AX-3010DS 1 Channel Adjustable SwitchingPower Supplies
Specifications:
Features:
lsimultaneous voltage and current readout lvoltage and current stepless adjustmentloverload protectionlcoarse and precise voltage and current adjustment
Display : 2x LCD 3 digitsNumber of channels : 1Current stabilisation : ≤1% + 5mAVoltage stabilisation : ≤1% + 10mVVoltage (regulated) ripple and noise : ≤200mVp-pWeight : 1:.5 kgDimensions : 85 x 160 x 205 mmPower supply : 230 V AC 50/60 Hz
Symbol Output voltage Output current[V DC] [A]
AX-3005DS 0...30 0...5AX-3010DS 0...30 0...10
AX-3005DLS Single Channel Linear Power Supplies
Specifications:
Features:
lsimultaneous voltage and current readout lvoltage and current stepless adjustment loverload protection lcoarse and precise voltage and current adjustment
Display : 2x LCD 4 digitsNumber of channels : 1Output voltage : 0...30 V DCOutput current : 0...5 AVoltage stabilisation : ≤0,01% + 5mVVoltage (regulated) ripple and noise : ≤1mVp-pDimensions : 85 x 160 x 260 mmPower supply : 110/230V 50/60Hz
www.axiomet.eu18
AX-3003L-3, AX-3005L-3 3-channel Linear Laboratory Power Supplies
Specifications:
Features:
l2 regulated blocks that can operate in constant current or constant voltage modes and as serial, parallel or independent PSUs l4 LED displays lcooled by temperature-controlled fan lsimultaneous voltage and current readout lvoltage and current stepless adjustment lprogrammable current limiter loverload protection lshort circuit protection
Number of channels 3Display : 4x LED 3,5 digitOutput voltage resolution : 0.1 VOutput current resolution : 0.01 AVoltage (regulated) ripple and noise : ≤1mVrms
:
Symbol AX-3003L-3 AX-3005L-3Output voltage [V DC] 0...30 0...30Output current [A] 0...3 0...5Output voltage 2 [V DC] 0...30 0...30Output current 2 [A] 0...3 0...5Output voltage 3 [V DC] 5 5Output current 3 [A] 3 3Dimensions [mm] 260 x 160 x 310 260 x 160 x 360Weight [kg] 10 13Power supply 220V 50 Hz 220V 50 Hz
Specifications:
Features:
l2 LCD displays 2 x 3,5 digits lprecise adjustment of current and voltage lshort-circuit protection loverload protection lprotection against connection to the PSU's output a voltage with reverse polarisation lsimultaneous readouts of voltage and current lvery good regulation factor for current and voltage
Display : LCD 2 x 3,5 digits Output voltage DC : 0-30 V Output current DC AX-3003D : 0-3 A
DC AX-3005D : 0-5 A Line regulation : ≤0,01% ±1 mV Load regulation : ≤0,2% ±1 mA Noise and ripple : ≤1 mVrms Mains supply : 230 V AC ± 10% Dimensions : 291 x 158 x 136 mm Weight AX-3003D : about 5 kg
AX-3005D : about 6 kg
AX-3003D and AX-3005D Single Output Laboratory Power Supply Units with LCD Display
Specifications:Features:
lreadable LCD displays 4 x 3,5 digits lshort-circuit protection lprogrammable overload protectionlsimultaneous readouts of voltage and current ltwo controlled sections which may operate in current or voltage stabilisation mode, or as in series, parallel or independent power supplies - „TRACKING MODE" option lsingle output with fixed voltage 5 V / 3 A lvery good regulation factor for current and voltage
Display : 4 x LCD 3,5 digits Output voltage DC : 2 x 30 V Output current DC : 2 x 3 A (AX-3003D-3) and
2 x 5 A (AX-3005D-3) Fixed output DC : 5 V / 3 A Line regulation : ≤0,01% ±1 mV Load regulation : ≤0,2% ±1 mA Noise and ripple : ≤1 mVrms Mains supply : 230 V AC ± 10% Dimensions : 365 x 265 x 164 mm Weight : about 10 kg (AX-3003D-3)
about 13 kg (AX-3005D-3)
AX-3003D-3 and AX-3005D-3 Triple Output Laboratory Power Supply Units with LCD Display
AX-3005DBL Single Output Laboratory Power Supplies
Specifications:
Features:
lsimultaneous voltage and current readoutlvoltage and current stepless adjustment
Number of channels : 1Display : 2x LCD 3,5 digitOutput voltage : 0...30 V DCOutput current : 0...5 AVoltage (regulated) ripple and noise : ≤0,5mVrmsVoltage output : 5V DC/3AVoltage stabilisation : ≤0,02% + 2mVCurrent stabilisation : ≤0,02% + 2mAWeight : 6 kgPower supply : 230VAC 50/60Hz
Standard equipment:
ltest leadslmains cable
AX-3005DBL-3 Triple Output Power Supplies
Specifications:
Features:lsimultaneous voltage and current readoutlvoltage and current stepless adjustment
Number of channels : 3Display : 4x LCD 3,5 digitOutput voltage : 0...30 V DCOutput current : 0...5 AOutput voltage 2 : 0...30 V DCOutput current 2 : 0...5 AVoltage output : 5V DC/3AVoltage (regulated) ripple and noise : ≤0,5mVrmsVoltage stabilisation : ≤0,02% + 2mVCurrent stabilisation : ≤0,02% + 2mAWeight : 16 kgPower supply : 230VAC 50/60Hz
Standard equipment:
test leadsmains cable
Specifications:
Features:
lsimultaneous voltage and current readoutlvoltage and current stepless adjustmentloverload protectionlrobust construction with excellent reliabilityldouble LED
Display : 2x LED 4 digitsNumber of channels : 1Output voltage : 0...30 V DCOutput current : 0...20 AVoltage (regulated) ripple and noise : ≤1mVrmsDimensions : 265 x 140 x 360 mmWeight : 14 kgPower supply : 230VAC 50/60Hz
AX-3020L Regulated DC High Power Supply
www.axiomet.eu 19
AX-CP-06 Miniature Clip-on Probes with 0.6 mm Socket
Features:
lTest accessories : clip-on probelClip-on probe type : pincers typelGrip capacity : max. 2 mmlConnection : socket with 0.6 mm studlRated voltage : 60 V DClRated current : 2 AlContact material : brasslContact plating : gold platedlInsulator material : polyamidelColour : AX-CP-06-B black
AX-CP-06-R red
AX-CP-04 Clip-on Probe with 4mm Banana Socket
Features:
lTest accessories : clip-on probelClip-on probe type : with puncturing pointlConnection : 4 mm socketlInsulator material : polyamidelContact material : brass/steellContact plating : nickel platedlGrip capacity : max. 6 mmlRated current : 10 AlOverall length : 159 mmlConform to the norm : IEC 1010 1000V Cat IIIlColour : AX-CP-04-B black
: AX-CP-04-R red
AX-CP-03 Clip-on Probes with Puncturing Point
Features:
lTest accessories : clip-on probelClip-on probe type : with puncturing pointlConnection : 4 mm socketlRated current : 10 AlContact material : brass/steellInsulator material : polyamidelOverall length : 136 mmlMax. wire diameter : 4 mmlConform to the norm : IEC 1010 1000V Cat IIIlColour : AX-CP-03-B black
AX-CP-03-R red
AX-CR-02-SET Crocodile Clamps with 4 mm Socket
Features:
l4 mm banana socketlrated current: 5Alcolour: black and redlset contents: 2x crocodile type measuring tiplinsulation material: PVC
AX-CP-01-SET Measuring Tips Set Socket 4mm 10A
Features:lconstruction: 4 mm banana socket - pointed tiplrated current: 10Altotal length: 123mmlcompliant with the Norm IEC1010 Cat. III 1000V, Cat. V 600Vlcolour: black and redlset contents: 2x measuring tip
AX-CP-02 Test Probes with the Fuse Socket
Features:
lTest accessories : test probelFeatures : fuse holderlRated current : 20 AlConnection : 4 mm socketlOverall length : 132.5 mmlConform to the norm : IEC 1010 1000V Cat IIIlInsulator material : polyamidelContact material : brassl Colour : black AX-CP-02-B
: red AX-CP-02-R
AX-CP-05 2mm Test Probe Tips with 4mm Socket
Features:
lTest accessories : test probelOverall length : 103 mmlBlade diameter : 2 mmlRated current : 10 AlConnection : 4 mm socketlInsulator material : polyamidelConform to the norm : IEC 1010 1000V Cat IIlColour : AX-CP-05-B black
AX-CP-05-R red
AX-TLP-001T Test Leads Set 1,2m 4mm Banana/Test Tip
Features:
l4mm banana plug - 2mm test tiplnominal current: 10Alleads length: 1,2 mlcompliant with IEC1010 Cat. III 1000Vlcolour: black and redlset contents: 2x test leadllead insulation material: PVC
AX-TLP-001 Test Leads Set
Features:
l4mm angled banana plug - test probeltype : cap protecting from short circuits during testslpointed tip that can be plugged to 4mm socketlrated current : 10 Alcable length : 1.2 mlconform to the norm : IEC 1010 for Cat. III 1000Vlplug dimensions : Ø4 mmlcolour : red and blacklkit contents : 2x test lead
AX-TL-4B1 Test Lead with 4mm Banana Plugs
Features:
Structure : 4mm straight banana plug - 4mm straight banana plug
Type : with 4 mm axial socket; with coverConform to the norm : IEC 1010 600V Cat IICable length : 1 mSymbol Features Wire cross- Rated current Colour
2section [mm ]AX-TL-4B1-B flexible 1 19 blackAX-TL-4B1-BL flexible 1 19 blueAX-TL-4B1-R flexible 1 19 redAX-TL-4BS1-B silicone 2,5 32 blackAX-TL-4BS1-R silicone 2,5 32 red
[A]
www.axiomet.eu18
AX-3003L-3, AX-3005L-3 3-channel Linear Laboratory Power Supplies
Specifications:
Features:
l2 regulated blocks that can operate in constant current or constant voltage modes and as serial, parallel or independent PSUs l4 LED displays lcooled by temperature-controlled fan lsimultaneous voltage and current readout lvoltage and current stepless adjustment lprogrammable current limiter loverload protection lshort circuit protection
Number of channels 3Display : 4x LED 3,5 digitOutput voltage resolution : 0.1 VOutput current resolution : 0.01 AVoltage (regulated) ripple and noise : ≤1mVrms
:
Symbol AX-3003L-3 AX-3005L-3Output voltage [V DC] 0...30 0...30Output current [A] 0...3 0...5Output voltage 2 [V DC] 0...30 0...30Output current 2 [A] 0...3 0...5Output voltage 3 [V DC] 5 5Output current 3 [A] 3 3Dimensions [mm] 260 x 160 x 310 260 x 160 x 360Weight [kg] 10 13Power supply 220V 50 Hz 220V 50 Hz
Specifications:
Features:
l2 LCD displays 2 x 3,5 digits lprecise adjustment of current and voltage lshort-circuit protection loverload protection lprotection against connection to the PSU's output a voltage with reverse polarisation lsimultaneous readouts of voltage and current lvery good regulation factor for current and voltage
Display : LCD 2 x 3,5 digits Output voltage DC : 0-30 V Output current DC AX-3003D : 0-3 A
DC AX-3005D : 0-5 A Line regulation : ≤0,01% ±1 mV Load regulation : ≤0,2% ±1 mA Noise and ripple : ≤1 mVrms Mains supply : 230 V AC ± 10% Dimensions : 291 x 158 x 136 mm Weight AX-3003D : about 5 kg
AX-3005D : about 6 kg
AX-3003D and AX-3005D Single Output Laboratory Power Supply Units with LCD Display
Specifications:Features:
lreadable LCD displays 4 x 3,5 digits lshort-circuit protection lprogrammable overload protectionlsimultaneous readouts of voltage and current ltwo controlled sections which may operate in current or voltage stabilisation mode, or as in series, parallel or independent power supplies - „TRACKING MODE" option lsingle output with fixed voltage 5 V / 3 A lvery good regulation factor for current and voltage
Display : 4 x LCD 3,5 digits Output voltage DC : 2 x 30 V Output current DC : 2 x 3 A (AX-3003D-3) and
2 x 5 A (AX-3005D-3) Fixed output DC : 5 V / 3 A Line regulation : ≤0,01% ±1 mV Load regulation : ≤0,2% ±1 mA Noise and ripple : ≤1 mVrms Mains supply : 230 V AC ± 10% Dimensions : 365 x 265 x 164 mm Weight : about 10 kg (AX-3003D-3)
about 13 kg (AX-3005D-3)
AX-3003D-3 and AX-3005D-3 Triple Output Laboratory Power Supply Units with LCD Display
AX-3005DBL Single Output Laboratory Power Supplies
Specifications:
Features:
lsimultaneous voltage and current readoutlvoltage and current stepless adjustment
Number of channels : 1Display : 2x LCD 3,5 digitOutput voltage : 0...30 V DCOutput current : 0...5 AVoltage (regulated) ripple and noise : ≤0,5mVrmsVoltage output : 5V DC/3AVoltage stabilisation : ≤0,02% + 2mVCurrent stabilisation : ≤0,02% + 2mAWeight : 6 kgPower supply : 230VAC 50/60Hz
Standard equipment:
ltest leadslmains cable
AX-3005DBL-3 Triple Output Power Supplies
Specifications:
Features:lsimultaneous voltage and current readoutlvoltage and current stepless adjustment
Number of channels : 3Display : 4x LCD 3,5 digitOutput voltage : 0...30 V DCOutput current : 0...5 AOutput voltage 2 : 0...30 V DCOutput current 2 : 0...5 AVoltage output : 5V DC/3AVoltage (regulated) ripple and noise : ≤0,5mVrmsVoltage stabilisation : ≤0,02% + 2mVCurrent stabilisation : ≤0,02% + 2mAWeight : 16 kgPower supply : 230VAC 50/60Hz
Standard equipment:
test leadsmains cable
Specifications:
Features:
lsimultaneous voltage and current readoutlvoltage and current stepless adjustmentloverload protectionlrobust construction with excellent reliabilityldouble LED
Display : 2x LED 4 digitsNumber of channels : 1Output voltage : 0...30 V DCOutput current : 0...20 AVoltage (regulated) ripple and noise : ≤1mVrmsDimensions : 265 x 140 x 360 mmWeight : 14 kgPower supply : 230VAC 50/60Hz
AX-3020L Regulated DC High Power Supply
www.axiomet.eu 19
AX-CP-06 Miniature Clip-on Probes with 0.6 mm Socket
Features:
lTest accessories : clip-on probelClip-on probe type : pincers typelGrip capacity : max. 2 mmlConnection : socket with 0.6 mm studlRated voltage : 60 V DClRated current : 2 AlContact material : brasslContact plating : gold platedlInsulator material : polyamidelColour : AX-CP-06-B