Insulated Copper Tube / Pipe

（　　　　　　　　　　　）

Remaining length （m）

A complete line of insulated copper tube and pipe sheathed in high grade insulation for thermal resistance up to 120 ℃ and suitable for any type of residential or commercial A/C system.Tubing is supplied in 20 meter coils, rigid pipe is in 4 meter coils.Available in single pipe （Type NC NEOCOIL） or paired linesets （Type PC PAIRCOIL）, with plain ends, swaged female end or flare nuts.

Relevant SafetyStandards

High-Quality Materials Upgrade Working Efficiency

Insulated Copper Tube / Pipe

NH/PC/NC/SPHNEOCOIL PAIRCOIL NEOCOIL FLARED PIPING SET

Easy to bend and cut, Paircoil （PC & SPH） can easily be separated by hand. No tools or cutting are necessary.

Improved installation efficiency

Emboss film

Insulation

Tough embossed outer covering is easy to tape and prevents damage during installation.＊1

Excellent Thermal Resistance

Performance Graph for Prevention of Sweating.

Superior Quality Control

Wear Resistant Outer Covering.All insulated tube and pipe products are fabricated with high grade insulation with a thermal resistance up to 120℃.＊1

INABA DENKO insulated copper tube and pipe conforms to most current safety and performance standards for copper pipe and insulation.

※This data is theoretical calculation.

Copper tube diameter 15.88mmPipe internal temperature 5℃

100

80

60

40

20

010 20 30 40

Ambient temperature （℃）

Ambient relative humidity （%）

Insulating material thickness 20mm



Consecutively numbered length markings are clearly printed on insulation surface at 1 meter intervals to indicate remaining length.

Length Markings

For concealed pipe installations, thicker insulation types （15 & 20mm） are available to further reduce sweating.

Concealed Installation

Insulated Copper Tube / PipeInsulated Copper Tube / Pipe

Copper Tube : Japanese Standard （JIS H3300 C1220T） European Standard （EN12735-1）Insulation : Japanese Standard （JIS A9511 A-PE-C-2） European Standard （EN13501-1） French Standard （M1） Italian Standard （CL-1） British Standard （BS476 Part 6 CLASS 0）

＊1 Excludes RB series.

Unlike rock wool or glass wool, our insulation which is chemically cross linked polyethylene foam with an expansion factor of 30, maintains it's non conductive stability with no deterioration of performance due to moisture absorption.

Low Absorption

A Wide Range of High QualityA Wide Range of High QualityInsulated Copper Tube & PipeInsulated Copper Tube & PipeA Wide Range of High QualityA Wide Range of High QualityInsulated Copper Tube & PipeInsulated Copper Tube & PipeA Wide Range of High QualityInsulated Copper Tube & Pipe

Highest Quality & Performance Guaranteed !!Highest Quality & Performance Guaranteed !!Highest Quality & Performance Guaranteed !!Highest Quality & Performance Guaranteed !!Highest Quality & Performance Guaranteed !!

＊1

1 2


Item No. Copper tube（O.D. × Length）

Copperthickness（mm）

Insulationthickness（mm）

Class Pcs/Pkg

PAIRCOIL・NEOCOIL 20MPC/NC

PAIRCOIL・NEOCOIL 20M－ERPC/NC-ER

PAIRCOIL・NEOCOIL 20M－M1PC/NC-M1

■ Insulation SpecificationsChemically cross linked polyethylene foam with an expansion factor of 30 enclosed by a plastic film with an embossed surface.

Thermal Conductivity （Ave. 23℃）Tensile StrengthWater Absorption VolumeThickness Shrinkage RatioMoisture Permeability （per 25mm thickness）Temperature Range

Item0.043 W/m・K or less14 N/c㎡ or over2.0 g/100 c㎡ or less7 % or less20 ng/㎡・s・Pa or less－40～120℃equivalent to UL 94HBF ＊1

Value

PAIRCOIL・NEOCOIL 20M－RBPC/NC-RBItem No.

Copper tube（O.D. × Length）



Class Pcs/Pkg




Class Pcs/Pkg




Class Pcs/Pkg

＊1 As per the result of in-house evaluation test.

Copper Tube : JIS H3300 C1220TInsulation : JIS A9511 A-PE-C-2

■ Insulation SpecificationsChemically cross linked polyethylene foam with an expansion factor of 30 enclosed by a plastic film with an embossed surface.

Thermal Conductivity （Ave. 23℃）Tensile StrengthWater Absorption VolumeThickness Shrinkage RatioMoisture Permeability （per 25mm thickness）Temperature RangeFlame Retardant

Item0.043 W/m・K or less14 N/c㎡ or over2.0 g/100 c㎡ or less7 % or less20 ng/㎡・s・Pa or less－40～120℃CLASS : DL-S2,d0 （EN-13501-1）

Value

Copper Tube : EN-12735-1Insulation : EN-13501-1

■ Insulation Specifications

Chemically cross linked polyethylene foam with an expansion factor of 30 enclosed by a plastic film with an embossed surface.

Thermal Conductivity （Ave. 23℃）Tensile StrengthWater Absorption VolumeThickness Shrinkage RatioMoisture Permeability （per 25mm thickness）Temperature RangeFlame Retardant

Item0.043 W/m・K or less14 N/c㎡ or over2.0 g/100 c㎡ or less7 % or less20 ng/㎡・s・Pa or less－40～120℃M1 （French class）

Value

Copper Tube : EN-12735-1Insulation : M1 （French class）

■ Insulation Specifications

Foamed Nitrile Rubber Insulation

DensityThermal Conductivity （Ave. 23℃）Tensile StrengthWater Absorption VolumeThickness Shrinkage RatioHardnessTemperature RangeFlame Retardant

Item0.10 ±0.01 g/c㎡0.043 W/m・K or less26.6 N/c㎡ or over0.01 g/100 c㎡ or less7 % or less14.0 or over－40～105℃BS476 Part 6 CLASS 0

Value

Copper Tube : EN-12735-1Insulation : BS476 Part 6 CLASS 0

JIS standard M1 standard （FR）

ER standard BS standard （UK）

PC-2320PC-2420PC-2520PC-3420PC-3520NC-220NC-320NC-420NC-520NC-620Z

1/4×3/8×20m1/4×1/2×20m1/4×5/8×20m3/8×1/2×20m3/8×5/8×20m1/4×20m3/8×20m1/2×20m5/8×20m3/4×20m

0.8×0.80.8×0.80.8×1.00.8×0.80.8×1.00.80.80.81.01.2

8×88×108×108×108×1088101010

1111144111

PC-2320-ERPC-2420-ERPC-2520-ERPC-3420-ERPC-3520-ERPC-3620-ERPC-3620Z-ERPC-4620Z-ERNC-220-ERNC-320-ERNC-420-ERNC-520-ERNC-620-ERNC-620Z-ER

1/4×3/8×20m1/4×1/2×20m1/4×5/8×20m3/8×1/2×20m3/8×5/8×20m3/8×3/4×20m3/8×3/4×20m1/2×3/4×20m1/4×20m3/8×20m1/2×20m5/8×20m3/4×20m3/4×20m

0.8×0.80.8×0.80.8×1.00.8×0.80.8×1.00.8×1.00.8×1.20.8×1.20.80.80.81.01.01.2

8×88×108×108×108×108×108×108×108810101010

32222222332222

PC-2320-M1PC-2420-M1PC-2520-M1PC-3520-M1NC-220-M1NC-320-M1NC-420-M1NC-520-M1NC-620-M1

1/4×3/8×20m1/4×1/2×20m1/4×5/8×20m3/8×5/8×20m1/4×20m3/8×20m1/2×20m5/8×20m3/4×20m

0.8×0.80.8×0.80.8×1.00.8×1.00.80.80.81.01.0

9×99×109×109×1099101010

322233222

PC-2320-RBPC-2420-RBPC-2520-RBNC-220-RBNC-320-RBNC-420-RBNC-520-RB

1/4×3/8×20m1/4×1/2×20m1/4×5/8×20m1/4×20m3/8×20m1/2×20m5/8×20m

0.8×0.80.8×0.80.8×1.00.80.80.81.0

8×88×108×10881010

3223322

21111111441111

211144111

1111111

3222233222

Code No.

02020020300204070200020500227002290023400235002363

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

Code No.

020260203602046020560227602296023460235602366

ç

ç

ç

ç

ç

ç

ç

ç

ç

Code No.

0202202032020427020202052702127021470224022720229202342023520236202364

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

Code No.

02027020370204702277022970234702357

ç

ç

ç

ç

ç

ç

ç

3 4

FLARED INSULATED COPPER TUBE SETSPH

Copper tube（O.D. × t）

1/4×0.8

Class

２

3m3.5457

3/8×0.8

3m3.5457

Insulation FLARE NUT（with cap）1/42 pcs2222

3/82 pcs2222

1/4×3/83m3.5457

Pcs/Pkg

1010101010

Code No.

6617066180661906620066210

Item No.

SPH-233-CSPH-233.5-CSPH-234-CSPH-235-CSPH-237-C

ç

ç

ç

ç

ç

■ Contents ＜Copper tube O.D. 1/4［t=0.8］ × 3/8［t=0.8］, FLARE NUT＞

NEOPIPE 4MNH Insulated Straight Copper Pipe

Unit ： mm

Dimensions

NEOPIPE 4M－20HNH-20H Insulation Thickness 20mm

Unit ： mm

Dimensions

4,0004,000

t

D d

ClassCopper tube Insulation

O.D.D3/81/25/83/43/47/81

1 1/81 1/41 3/81 1/21 5/81 3/42

2 1/8

Thicknesst

Tempergrade

0.80.81.01.01.051.01.01.01.11.11.351.21.251.41.5

1/2H1/2H1/2H1/2H1/2H1/2H1/2H1/2H1/2H1/2H1/2H1/2H1/2HHH

O.D.d273437414144475053576064668386

Thickness

81010101010101010101010101515

333333322121111

Pcs/Pkg

282016121210866444422

Code No.

653006531065320653306688665340653506536065370653807060266760667706678066790

Item No.

NH- 340NNH- 440NNH- 540NNH- 640NNH-640N-1.05TNH- 740NNH- 840NNH- 940NNH-1040NNH-1140NNH-1240ZNH-1340ENH-1440ENH-1640ENH-1740E

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

Copper tube InsulationO.D.D7/81

1 1/81 1/41 1/2

Thicknesst

Tempergrade

1.01.01.01.11.35

1/2H1/2H1/2H1/2H1/2H

O.D.d6467707380

Thickness

2020202020

Class

33222

Pcs/Pkg

86444

Code No.

7059770598705997059070632

Item No.

NH- 740N-20HNH- 840N-20HNH- 940N-20HNH-1040N-20HNH-1240Z-20H

ç

ç

ç

ç

ç

t

4,0004,000

D d

NEOCOIL－KHENC-KHE Insulation Thickness 20mm

Copper tube（㎜）

O.D. × tClass

33222

1/4×0.83/8×0.81/2×0.85/8×1.03/4×1.2

Coillength（ｍ）2020202020

InsulationO.D.（㎜）4851545761

Insulationthickness（㎜）2020202020

Pcs/Pkg

11111

Code No.

7011070120701307014070656

Item No.

NC-220-KHENC-320-KHENC-420-KHENC-520-KHENC-620Z-KHE

ç

ç

ç

ç

ç

NEOCOIL－15HNC Insulation Thickness 15mm

Copper tube（㎜）

O.D. × tClass

322

Coillength（ｍ）202020

InsulationO.D.（㎜）414447

Insulationthickness（㎜）151515

Pcs/Pkg

111

Code No.

706937069470695

Item No.

NC-320-15HNC-420-15HNC-520-15H

3/8×0.81/2×0.85/8×1.0

ç

ç

ç

NEOPIPE 4M－KHENH-KHE Insulation Thickness 20mm

Unit ： mm

Dimensions

t

4,0004,000

D d

Copper tube InsulationO.D.D3/81/25/83/47/81

1 1/81 1/41 3/81 1/21 5/81 3/42

2 1/8

Thicknesst

Tempergrade

0.80.81.01.051.21.351.551.71.852.002.152.32.652.8

1/2H1/2H1/2H1/2H1/2H1/2H1/2H1/2H1/2H1/2H1/2H1/2HHH

O.D.d5154576164677073768084869396

Thickness

2020202020202020202020202020

Pcs/Pkg

20121288644442222

Class

3

Code No.

6544065450654607056665770705687056970560705617056270583705847058670587

Item No.

NH- 340N-KHENH- 440N-KHENH- 540N-KHENH- 640A-KHENH- 740N-KHENH- 840A-KHENH- 940A-KHENH-1040A-KHENH-1140A-KHENH-1240A-KHENH-1340A-KHENH-1440A-KHENH-1640A-KHENH-1740A-KHE

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

■ Insulation Specifications ■Refrigerant Classification ListChemically cross linked polyethylene foam with an expansion factor of 30 enclosed by a plastic film with an embossed surface.

Value

Thermal Conductivity（Ave. 23℃）Tensile Strength

Water Absorption VolumeThickness Shrinkage RatioMoisture Permeability（per 25mm thickness）Temperature Range

0.043 or less

14 or over2.0 or less7 or less

20 or less

－40～12

Item

1

2

3

Class

3.45 MPa

4.30 MPa

4.80 MPa

Max.UsablePressure

R22, R407C, R404A, R507A, etc

R22, R410A, R407C, R404A, R507A, etc

4.80MPa or less

Applicable Refrigerant

W/m・K

N/㎝2

g/100㎝2

％

ng/m2・s・Pa

℃

Unit


Special Order Only !











※ Also available in a self extinguishing flame retardant type （NHR Series）.5 6

TK-3K

PIPELOCK TK

UNIVERSAL BAND HBR

Vertical Mounting Bracket for Structural Steel （TK-U）

Unit ： mm

Dimensions Specification

Attached Screw

Pcs/PkgCode No. Item No. Compliant pipe size A B,E C D FB

A

Body

Hook

C

D 22

EF

10

φ7

Pipe Support Ferrule Fixing Clamp

20

5176351764517655176651767517685176951770517715177251773517745177651777

ＴＫ- 3ＫＴＫ- 4ＫＴＫ- 5ＫＴＫ- 6ＫＴＫ- 7ＫＴＫ- 8ＫＴＫ- 9ＫＴＫ-10ＫＴＫ-11ＫＴＫ-12ＫＴＫ-13ＫＴＫ-14ＫＴＫ-16ＫＴＫ-17Ｋ

φ 9.52φ12.70φ15.88φ19.05φ22.22φ25.40φ28.58φ31.75φ34.92φ38.10φ41.28φ44.45φ50.80φ53.98

9.6012.8116.0019.1922.3625.5628.7531.9335.1138.3141.5044.6851.0354.22

35

50

63.464.866.468.069.671.473.074.676.578.179.681.284.486.0

31.432.834.436.037.639.441.042.644.546.147.649.252.454.0

1.0

1.6

2.0

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

※TK-3K is different from other sizes on the shape and the installation method. Contact INABA for details.

※

PIPELOCK （Pipe Support Ferrule + Fixing Clamp）TK Stress Relieving Bracket/Clamp system for vertical riser pipes in A/C systems

Stress Relieving Bracket / Clamp・Copper FittingStress Relieving Bracket / Clamp・Copper Fitting

＊Exclude some items

COPPER FITTINGS for Building & A/C Pipe Systems

PIPELOCK TK

High Quality JIS approved COPPER FITTINGS satisfy all the requirements for hot and cold water as well as refrigerant gas.

●Material　 Pipe Support Ferrule : Body … C1220 Hook … SUS301-CSP　 Fixing Clamp : SPHC （Powder coated）

●⊕Hex bolt M6×20L … 2 pcs.（Unichrome）　　 Hex nut M6 … 2 pcs.（Unichrome）

Unit ： mm

Dimensions

Vertical Mounting Bracket for Structural SteelTK-U

Pcs/PkgCode No. Item No. L

Pcs/PkgCode No. Item No. L■Hot-Dip Galvanized Type

Unit ： mm

Dimensions

Unit ： mm

Dimensions

Pcs/PkgCode No. Item No. L

Pcs/PkgCode No. Item No.■Outdoor Use Type

■ Indoor Use Type

100

5184051841518425184351844

ＴＫ-K 60ＴＫ-K 70ＴＫ-K 80ＴＫ-K 90ＴＫ-K100

60708090100

t

3.2

L60708090100

t

3.0

ç

ç

ç

ç

ç

100

5185051851518525185351854

ＴＫ-K 60-SUSＴＫ-K 70-SUSＴＫ-K 80-SUSＴＫ-K 90-SUSＴＫ-K100-SUS

ç

ç

ç

ç

ç

100

5182051821518225182351824

ＴＫ-B 60ＴＫ-B 70ＴＫ-B 80ＴＫ-B 90ＴＫ-B100

60708090100

ç

ç

ç

ç

ç

100

5182651827518285182951830

ＴＫ-B 60ZＴＫ-B 70ZＴＫ-B 80ZＴＫ-B 90ZＴＫ-B100Z

60708090100

ç

ç

ç

ç

ç

Pcs/PkgCode No. Item No.

Pcs/PkgCode No. Item No.■Hot-Dip Galvanized Type

10051860 ＴＫ-U00ç

10051861 ＴＫ-U00Zç

7350 7

L

30.4t

175174 15

15 2-φ10.5

15.2

507

174 175

30.43.2

L

20.5

10.5

15.2

517

46.6

5 17 30.4 t3.2

7 2515.2

10.5

22.5

63.2

For PIPELOCK TK

Direct Mount Horizontal Wall BracketTK-K

For PIPELOCK TK

UniversalHorizontal BracketTK-B

For PIPELOCK TK

For reduced clearance from wall surface.

●Material … SPHC （Unichrome）



●Material … SPHC 　（Hot-dip galvanized equivalent to HDZ35）

● Material … SPHC 　（Hot-dip galvanized equivalent to HDZ35）

※ A wide range of copper fittings up to 66.68mm diameter is available from INABA DENKO.

● Material … SUS304

■Conventional Installation ■Typical installation with PIPELOCK

※Illustration is Line Art.　When using PIPELOCK, provision for thermal expansion is still required.

Unlike a conventionally supported vertical riser installation, PIPELOCK is brazed to the vertical copper riser and reduces the loading created by the weight of the pipe system.

Do not use on vertical risers over 50 meters and ensure that the PIPELOCK ferrule is brazed on during installation.

Reduces gravity loading on vertical riser

In conventional installations, the lowest elbow of the pipe system carries the full load of the pipe itself plus the extra stresses imposed by thermal expansion. Installing PIPELOCK in the center of the vertical riser reduces the load created by the system components as well as the thermal expansion by 50%.

Reduces extra stress on vertical riser due to thermal expansion by 50%Tab on pipe support allows temporary fixing to facilitate brazing without slippage.

Temporary fixing

Slotted holes on wall bracket allow for precise adjustments.Easily adjustable

Because the pipe support ferrule is split, PIPELOCK can easily be fitted onto the riser and adjusted after the pipe system has been installed.

Can be applied after installation of pipe system

Caution

Support

Support

Support

Top floor

Lowest floor

Support

AgingSupport

Support

Top floor

Lowest floor

Load is transferred to lowest elbow on riser causing it to become compressed and buckle.

Weight of pipe system components plus thermal expansion causes riser pipe to sag.

Buckling of elbow at lowest floor

Features

Thermal expansion

Cut in half of load to elbow at lowest floor

Support

Fixed

Support

Top floor

Lowest floor

Support

Fixed

Support

Top floor

Lowest floor

Aging Thermal expansion

Thermal expansion

Thermal expansion

Central fixed point acts as a fulcrum to direct thermal expansion upwards and downwards, supporting weight of copper pipe and reducing load on elbow at lowest floor by 50%.

TK-U00

TK-U00Z

Comply with Japanese Building Construction standard JIS H 3401and Refrigerant Standard JIS B 8607

Specification

Specification

Specification

Specification

Specification

Specification

7 8

Features

Purpose Caution

Light & toughLight & toughLight & toughLight & toughLight & tough

Unit：mm

Dimensions

Pcs/PkgAllowable static loadCode No. Item No. Insulation

thickness

Compliant size

Copper pipe size H A BBody

thickness（t1）

Clip thickness（t2）

L2L1

Dimension（mm）

Unit ： mm

Dimensions t1=Body thicknesst2=Clip thickness

BA

H

L1

L 2

30 100100100100

100

50

50

50

50

196N（20kgf）

56220562305624056250

56260

56270

56280

56290

56300

SRV-24NSRV-35NSRV-46NSRV-58N

SRV-69N

SRV-710N

SRV-811N

SRV-912N

SRV-1114N

10×1010×1010×1010×1010×1010×2010×1010×2010×1010×2010×1010×2010×1010×20

6.35× 9.52～ 6.35×12.706.35×15.88～ 9.52×15.889.52×19.05～12.70×19.0512.70×22.22～15.88×25.4019.05×25.40～19.05×28.58

6.35×9.5222.22×28.58～22.22×31.756.35×12.70～12.70×19.0525.40×31.75～25.40×34.92

15.88×19.0528.58×34.92～28.58×38.10

19.05×19.0531.75×38.10～34.92×44.45

19.05×38.10

828899101

115

119

123

129

143

57637483

90

95

98

104

118

34374147

50

61

63

63

80

1.2

1.6

1.0

58616571

74

85

87

87

106

73768086

89

100

100

100

118

ç

ç

ç

ç

ç

ç

ç

ç

ç

● SUPERLOCK Clamp quickly snaps onto threaded rod.● Hinge mechanism permits temporary installation.● Easy height adjustment by rotating clamp on threaded rod.

● Supports pipe by attaching to a W3/8” threaded rod.

● For indoor use only. Use only with W3/8” threaded rod.

Unit：mm

Dimensions

Pcs/PkgAllowable static loadCode No. Item No. NEODRAIN

PIPE

Compliant pipe sizeInsulated copper pipeVP

pipe 10mmH A

Body thickness（t1）

Clip thickness（t2）

L2L1

Dimension（mm）

　AA

H

L1

L 2

30

100505050505050

196N（20kgf）

55890559305590055910559405592055950

SRS-25SRS-30SRS-35SRS-40SRS-45SRS-50SRS-65

－NDD-20NNDD-25NNDD-30N－

NDD-40NNDD-504N

2530－40－50－

PMQ

－ＰＭＱ-13ＰＭＱ-16ＰＭＱ-20ＰＭＱ-25ＰＭＱ-30ＰＭＱ-50

12.719.0522.2228.5831.7538.1050.80

20mm－－－9.5212.7022.2238.10

828083858791125

32384448526080

1.2

1.6

1.0

596369737785106

747581858997118

ç

ç

ç

ç

ç

ç

ç

Pcs/PkgAllowable static loadCode No. Item No.

Insulation thicknessCompliant size

Max Copper pipe size BAHDimension

●SUPERLOCK Clamp quickly snaps onto threaded rod and locks shut with one hand.

● Hinge mechanism permits temporary installation.● Easy adjustment by rotating on threaded rod or bolt.● Release lever on clip permits easy snap opening and closing.

● Material … Steel with SPCC （Unichrome） plating● Supports pipe by attaching to bottom of a W3/8” bolt.

● For indoor use only. Use only with W3/8” bolt.

H36.7

A

B

30

100

50

50

50

196N（20kgf）

57810

57820

57830

57840

SRE-46

SRE-612

SRE-714

SRE-816

10×1010×1010×2010×1010×2010×1010×20

12.70×19.0519.05×38.1012.70×19.0522.22×44.4515.88×28.5825.40×50.8025.40×41.28

34

41

47

47

41

61

70

84

75

102

117

131

ç

ç

ç

ç

Item No.

PL-24V

PL-35V

Compliant copper pipe

6.35（8mm）× 9.52（ 8mm）6.35（8mm）×12.70（10mm）

9.52（8mm）×15.88（10mm）

Allowable static load Temperature range

■ Compliant copper pipe

■ Allowable static load & temperature range

D

C

B

A

■ Compliant threaded rod ・・・Ｗ3／8

Pcs/PkgColorCode No. Item No.ADimension（mm）

100Gray

Material

PP6018060190

PL-24VPL-35V

115124

B94100

C100103

D3434

ç

ç

●Material… PP

74.5N（7.6kgf） 0℃～60℃

Dimensions

Unit：mm

●Material … Steel with SPCC （Unichrome） plating

The shape of SRS-25 and 65 is different.

Single SuspensionThreaded Rod Fitting TypeSUPERLOCK V TYPE 〈Integrated Body and Clip〉SRV

Threaded Rod Fitting TypeSingle SuspensionSUPERLOCK S TYPE 〈Integrated Body and Clip〉SRS

SUPERLOCK E TYPE 〈Hanger〉SRE

Refrigerant pipe support for useonly with W3/8” threaded rodPIPEHOOKPL

One-Touch Fitting

One-Touch Fitting

●SUPERLOCK Clamp quickly snaps onto threaded rod

● Hinge mechanism permits temporary installation.● Easy height adjustment by rotating on threaded rod.

● Supports pipe by attaching to bottom of a W3/8” threaded rod.

● For indoor use only. Use only with W3/8” bolt.

■ Installation　 procedure

① ② ③

t=1.6

Hanger SupportHanger Support

t1=Body thicknesst2=Clip thickness

One-touchOne-toucheasy lockeasy lockOne-touchOne-toucheasy lockeasy lockOne-toucheasy lock

Easy adjustmentEasy adjustmentby temporary stop release leverby temporary stop release leverEasy adjustmentby temporary stop release lever

Sealant Putty・Flare Nuts・Flare CouplersSealant Putty・Flare Nuts・Flare Couplers

Standard Torque Specifications for Flare Nuts :Nominal diameterTorque（Ｎ･ｍ）

1/4 3/8 1/2 5/8 3/416±2 38±4 55±6 75±7 110±10

● Nuts must be tightened with a torque wrench strictly to torque specifications listed in the table below.Overtightening will cause stress corrosion cracks on the flare nut and undertightening will lead to refrigerant leakage.

Pcs/Pkg（pcs×bag）

50 （5×10）50 （5×10）50 （5×10）50 （5×10）50 （5×10）

Code No. Item No.1010210103101041010510106

UN-2BUN-3BUN-4BUN-5BUN-6B

Applicable copper tube size6.35（1/4）9.52（3/8）12.70（1/2）15.88（5/8）19.05（3/4）

ç

ç

ç

ç

ç

Applicable refrigerant


100 （10×10）100 （10×10）100 （10×10）100 （10×10）50 （ 5×10）

Code No. Item No.1009210093100941009510096

FUN-2BFUN-3BFUN-4BFUN-5BFUN-6B


ç

ç

ç

ç

ç




100 （10×10）100 （10×10）100 （10×10）100 （10×10）100 （10×10）

Code No. Item No.1008210083100841008510086

FN-2BFN-3BFN-4BFN-5BFN-6B


ç

ç

ç

ç

ç

●All weather, fire retardant non drying putty with superior adhesion.

● Temperature range : －20～50℃●Working temperature : 5～40℃　※Putty will harden below 5℃,

always heat before use at this temperature.

Pcs/PkgCode No. Item No. Color Contents

●Oil in putty may stain paint or wallpaper if in direct contact. Use WALL CAP （WC） or A/C CAP （AC） to separate putty from wall surface.

10020

06010602

AP-200AP-1000

Gray・Ivory・White 200g1000g

ç

ç

●Hardens in 1.5 hours @ 20℃.● Can be used underwater.

● Do not use in temperatures over 110℃.

● Do not use in the presence of ethyl alcohol, chloride bleach, chlorine gas or nitric acid.

● Always use protective gloves when working with this product.

Pcs/Pkg24

Code No. Item No.40510 EP-178

Contents500g（250g×2）ç

Mix components thoroughly until color of mixture changes to gray.

① Do not use until mixture is uniformly gray.

②

FLARE NUTFN FLARE COUPLER with Flare NutFUN

FLARE COUPLERUN

PLASEALEP 2 componentepoxy puttySEALANT PUTTY for A/CAP

Pcs/PkgCode No. Item No. L A B C D E

Unit : mm

Dimensions

●Apply to channel, and inside RD series duct.

● Permits BIGTIE to be direct mounted onto any flat surface.

● Material … PP and ABS

● Attaches BIGTIE onto lineset duct or any flat surface including RD GIRDER （RDK）.

BHC-1・2 BHC-3

BHC-1BHC-2BHC-3

－－－

BT-200φ25～45φ25～35－

BT-250φ25～65φ25～55－

BT-300φ25～85φ25～75φ30～65

BT-350φ40～95φ35～90φ30～80

BT-400φ40～115φ35～110φ30～100

BT-450

D E

LA

C B

■Effective binding diameter

100100100

603006031060320

BHC-1BHC-2BHC-3

647891

52.566.560

32.532.532.5

444444

23.223.230.8

16.516.524.1

ç

ç

ç

Pcs/PkgCode No. Item No. L A H t

Unit : mm

Dimensions

●Material…PE　 Temperature range （Surface temperature） … －20～60℃

※ 20 pcs./pack

LA15.5

φ4.5

t H2620

40pac

40pac

20pac

20pac

20pac

20pac

60050

60060

60070

60080

60090

60100

BT-200

BT-250

BT-300

BT-350

BT-400

BT-450

200

250

300

350

400

450

Biding diameter

φ20～φ 50

φ30～φ 66

φ33～φ 82

φ40～φ 98

φ48～φ114

φ54～φ130

50

80

90

100

150

170

10

10

10

10

11.6

11.6

2.5

2.5

2.5

2.5

3.3

3.3

ç

ç

ç

ç

ç

ç

Copper pipe applicable guide

6.35× 9.52（Insulation thickness 8mm）

9.52×15.88（Insulation thickness 8×10mm）

12.70×28.58（Insulation thickness 10mm）

19.05×38.10（Insulation thickness 10mm）



● R410A, R407C, R134a， R404A， R507A， R22

● R410A, R407C, R134a， R404A， R507A， R22● R410A, R407C, R134a， R404A， R507A， R22

BIGTIE MOUNTING CLIPBHC Mounting base forBIGTIE system

Self LockingPlastic Pipe TieBIGTIEBT

●Binding diameter is reduced when BIGTIE is used with BHC mounting clip.

● BIGTIE is not a load bearing system, it is designed for use only as a light duty means of retaining the lineset and/or drain hose assemblies.

● DO NOT USE BIGTIE AS A BRACKET TO HANG OR SUPPORT ANY VERTICAL OR HORIZONTAL PIPE SYSTEM.

BTBHC

●Material … Steel with SPCC （Unichrome） plating

● BIGTIE is not a load bearing system, it is designed for use only as a light duty means of retaining the lineset and/or drain hose assemblies.


Specification

Purpose

Features

Caution

Specification

Caution

Caution

Features

Features

Purpose

Purpose

Caution

Caution

FeaturesFeatures

Specification

Specification

Specification Specification

Caution

Caution

9 10

Lineset Ducting System

A Perfect Blend of Style Form and Function in a High Grade Finish

Excellent Performance

A Wide Range of Components in Different Colors and Sizes

Professional

SLIMDUCT SD has been installed in many residential and commercial applications, including public buildings, all over the world.

High Reliability & Track Record

Color Scored Line for Exit Slot of Drain Hose

Easy & Quick Installation

SLIMDUCT Accelarated Weather Resistance Test

100mm Interval Slotted Knockouts

SLIMDUCT is fabricated from a special high grade PVC for superior UV and weather resistance to ensure long term protection for the linesets from the elements, vandalism and pest damage.

Protective

SLIMDUCT SD Taped Lineset InstallationOver the long term, tape will deteriorate exposing lineset, damaging appearance and reducing efficiency of the A/C system.

Almost no changes in SLIMDUCT

Variety

White Ivory Gray Brown Black

Years later Years later

SLIMDUCT IS THE WORLDWIDE PIONEER SLIMDUCT IS THE WORLDWIDE PIONEER OF LINESET TRUNKING FOR A/C SYSTEMS.OF LINESET TRUNKING FOR A/C SYSTEMS.

PAIRCOILSL STRAP KIT

DRAIN HOSEBase

Cover

Rustproof

Flame Retardant

The SLIMDUCT combination of duct and fittings is suitable for any split A/C system and will conceal, beautify and protect any exposed linesets perfectly.

Simple 3 step installation:1. Secure SLIMDUCT & fitting bases｠to wall.2. Install lineset and drain hose.3. Clip on duct cover and secure fitting covers with screws.

SLIMDUCT includes a scored line along both sides of base which permits easy notching to create an exit slot for drain hose at any point.

Slotted knockouts are provided at 100mm intervals on the base of each 2m length of SLIMDUCT to facilitate attachment to the wall.

Size Fittings4 sizes to accommodate any single lineset or multiple linesets.

A full range of 26 fittings customizes SLIMDUCT SD / NSD to suit the layout of any lineset system.

5 colors provide a wide range to suit any color scheme.3

SD-140 SD-100 SD-77 SD-66

All fittings include fixing screws made from SUS 304 Stainless Steel to eliminate rust streaks.

SLIMDUCT SD & NSD1 conform to the requirements of UL-94-V-02.

1 Excludes some items.2 In house testing based on UL-94-V-0.

3 Paintable to match or compliment custom colors. Follow paint manufacturers recommendations for vinyl products.

Tensile Strength

Irradiation Time

Tensile Strrength

Bending Strength

Bending Strength

1,000 2,000

8826（900）N/cm3（kgf/cm3）

7846（800）

6865（700）

4413（450）N/cm3

（kgf/cm3）

3223（400）

3432（350）

1,000hours

Accelerated weather resistance test was carried out on test pieces of polyvinyl choloride used for SLIMDUCT SD and the change of mechanical characteristics was checked with testing time.

The accelerated weather resistance test was carried out for 2,000 hours and following characteristics of test pieces were measured at every 200 hours. 1） Tensile Strength 2） Bending Maximum Strength

1） For Tensile Strength : According to JIS K-67452） For Bending Maximum Strength : According to JIS K-7203

1） Accelerated Weather Resistance Tesiting Device. Sunstrine Carbon Weather Meter Condition of Irradiation : According to JIS D-02052） Strength Testing Instrument : Universal TesterBoth Device/instrument are in Industrial testing Laboratory in Kyoto

Purpose

Test ItemsPracticed

Test Pieces

TestingDevice

ResultsIrradiaiton Time（Hrs）

No Damage for 2,000 hours.

THE ORIGINAL SLIMDUCT SD PVC TRUNKING SYSTEM THE ORIGINAL SLIMDUCT SD PVC TRUNKING SYSTEM HAS ALWAYS BEEN THE MARKET LEADER IN QUALITY, HAS ALWAYS BEEN THE MARKET LEADER IN QUALITY, DESIGN, FUNCTION AND VERSATILITY.DESIGN, FUNCTION AND VERSATILITY.

SLIMDUCT IS THE WORLDWIDE PIONEER SLIMDUCT IS THE WORLDWIDE PIONEER OF LINESET TRUNKING FOR A/C SYSTEMS.OF LINESET TRUNKING FOR A/C SYSTEMS.SLIMDUCT IS THE WORLDWIDE PIONEER OF LINESET TRUNKING FOR A/C SYSTEMS.THE ORIGINAL SLIMDUCT SD PVC TRUNKING SYSTEM THE ORIGINAL SLIMDUCT SD PVC TRUNKING SYSTEM HAS ALWAYS BEEN THE MARKET LEADER IN QUALITY, HAS ALWAYS BEEN THE MARKET LEADER IN QUALITY, DESIGN, FUNCTION AND VERSATILITY.DESIGN, FUNCTION AND VERSATILITY.

THE ORIGINAL SLIMDUCT SD PVC TRUNKING SYSTEM HAS ALWAYS BEEN THE MARKET LEADER IN QUALITY, DESIGN, FUNCTION AND VERSATILITY.

11 12

END FITTING（SE/SEN）

WALL INLET（SW）

SLIMDUCT（SD/NSD）

FLEXIBLE ELL（SF）

SADDLE（SFS）

FLEXIBLE ADAPTOR（SFJ）

Unit ： mm

Dimensions

SLIMDUCT SDSD Ducting

BE

D

C A

2000

SLIMDUCT SDSLIMDUCT SD

Pcs/Pkg1515105－

Code No.0401040204030404

A B C D E6075100140200

58637080150

46.56086122－

647699135－

51566473－

ç

ç

ç

ç

Item No.SD- 66SD- 77SD-100SD-140SD-200

Unit ： mm

Dimensions

NEO SLIMDUCT NSD ＜ Overseas Model ＞NSD Ducting

Pcs/PkgCode No.1402214032

A B C D EItem No.NSD- 77NSD-100

WALL INLET（SW）90° FLAT ELL

（SK）


END FITTING（SE/SEN）

COUPLER（SJ）

WALL INLET（SW）


REDUCER（SDR）

REAR ENTRYCOUPLER（SJA）

Installation withDifferent Wall Thicknesses

Basic Installation ‒ 1Airhandler

VerticalDual Airhandler System

ç

ç

2000BE

ACD

1510

75100

6270

6484

77100

5664

● Color … White, Ivory, Brown

● SD-200 : Under development （Design & shape are different from SD series. Dimension A&B is reference.）

WALL INLET（SW）TEE（ST）


Horizontal Dual Airhandler System

13 14

Pcs/Pkg20

Code No. Item No.0429 SWA-77ç

Pcs/Pkg60（20）60（20）10（10）5（ 5）

Code No. Item No.0411041204130414

SW- 66SW- 77SW-100SW-140

A B C D E6883110146

62667484

90110128166

195205223280

77778698

ç

ç

ç

ç

※（） shows quantities of Gray, White, Black, and Brown.

※ White color is only available with SWM-77.

※ It is not guaranteed to fit in this item with every existing pipe installation. 　 Check the job site before use.

● Color … Ivory, Brown, Black, Gray　● Material … PVC + ABS （at lattice）

Pcs/Pkg101010

Code No. Item No.040804070409

SWM- 77SWM- 77LSWM-100

A B C D E146.5161.0166.0

8282107

188208215

676775

848494

ç

ç

ç


1010

A

146.5161.0

B

200208

Flange O.D.A/C Cap Size

～φ130～φ153

Flange Height～10～10

04100415

SWX-77SWX-77L

ç

ç

● Material … PVC + ABS （at lattice）

Pcs/Pkg10

Code No. Item No.7352 SWK-77Nç

※

Pcs/PkgCode No. Item No. A B C




60（20）60（20）10（10）5（ 5）

0431043204330434

SC- 66SC- 77SC-100SC-140

6681106145

63677584

97100117126

D20203030

ç

ç

ç

ç

2020

73217322

SCM- 66SCM- 77

6782

6268

7582

ç

ç

2020105

7331733273337334

SCF- 66SCF- 77SCF-100SCF-140

6782107147

62687585

58616467

ç

ç

ç

ç

※

Pcs/Pkg　60（20）60（20）10（10）5（ 5）

Code No. Item No.0421042204230424

SK- 66SK- 77SK-100SK-140

A B C6883109146

62667484

100128151190

D20202030

ç

ç

ç

ç


Pcs/PkgCode No. Item No. A B C2020

73017302

SKM- 66SKM- 77

6782

6268

8297

ç

ç


7311731273137314

SKF- 66SKF- 77SKF-100SKF-140

6782107147

62687585

60657592

ç

ç

ç

ç

※

Flange O.D.～φ130～φ153～φ150

Flange Height～10～10～10

Item No.SWM- 77SWM- 77LSWM-100

■ Applicable size of A/C cap

Unit : mm

Dimensions

Unit : mm

Dimensions

WALL INLET for A/C Cap and A/C with VentilationSWX

Unit : mm

Dimensions

WALL INLETSW WALL INLET for Aftermarket Add-onsSWA

WALL INLET for A/C CapSWM

Unit : mm

Dimensions

Unit : mm

Dimensions

WALL INLET for A/C with VentilationSWK

77110

205

65

Duct position to be installed

Unit : mm

Dimensions

Unit : mm

Dimensions

D E

C

B

A

A

B C

D

A B C205 116 127

D67

A 134

B65

C

D

A

B

E

90° VERTICAL ELLSC

45° VERTICAL ELLSCF

Unit : mm

Dimensions

90° MINI VERTICAL ELLSCM

Unit : mm

Dimensions

CA

B

A

B

D

C

90° FLAT ELLSK 90° MINI FLAT ELLSKM

Unit : mm

Dimensions

Unit : mm

Dimensions

DC

B C

A φ4

C

28

B

A

45°

φ4

45° FLAT ELLSKF

Aftermarket

Aftermarket

add-onsadd-onsAftermar

ket

add-ons

360°rotary exhaust

cap360°rotar

y exhaust cap

360°rotary exhaust

cap

Hint : Slide Prevention PinHint : Slide Prevention PinHint : Slide Prevention PinHint : Slide Prevention PinHint : Slide Prevention Pin

＊ Except the size 140

Every wall inlet type is provided with a protruding pin on the inside surface of the cover which can be aligned with a hole in the cover of SLIMDUCT SD to prevent the duct cover from sliding down when it is mounted vertically.


A

B 10

C

φ4

C

C

B

A

Cover

SLIMDUCT SD

Slide preventionpin

Base

15 16

Unit ： mm

Dimensions

REDUCERSDR

90° SHAPE CHANGE ELBOWSN

Unit ： mm

Dimensions

REDUCER ADAPTOR for Wall InletSDI

REAR ENTRY COUPLERSJA

※Color … Ivory, Gray, Brown, Black

TEEST

Pcs/PkgCode No. Item No.50517 SN-77ç

Pcs/PkgCode No. Item No. A B C D E

Unit ： mm

Dimensions

B

A

ED

CE E

10105

046204610463

ST- 77ST-100ST-140

85109148

687887

165200250

124154199

313332

Each ST pack includes these reducers:

ST-77-66 （for SD-66） ×2

ST-100-66 （for SD-66） ×2ST-100-77 （for SD-77） ×2

ST-140-100 （for SD-100） ×2

ç

ç

ç

SN-77ASN-77B

SN-77B SN-77A

Combined view

Unit ： mm

Dimensions

2010

04770478

SDR100- 77SDR140-100

6675

7584

82109

107147

66100

ç

ç

Pcs/PkgCode No. Item No. A B C D E Compliant pipe size


Unit ： mm

Dimensions

A C

DB

E


CB

D

A

E2-φ4

75 40

61

200447 SDI-77-66ç

200445 SJA-100 109 75 148 70 88 PC-2320×PC-2320ç

■ Typical Installation ■ Caulking locations

Seal with putty after lineset is installed

Base

Caulking

REAR ENTRYCOUPLER

Duct

Caulking

REARENTRYCOUPLER（SJA）

81 41

2323

138

4181

138

50MM FIXED OFFSETSIF

Unit ： mm

Dimensions

END FITTINGSE END FITTINGSEN

Unit ： mm

Dimensions

Unit ： mm

Dimensions

Pcs/PkgCode No. Item No. A B

82

48 50B

180

A

101010

041604170418

SIF- 66SIF- 77SIF-100

6883108

646974

ç

ç

ç




30

53

AB

C


C D

A

E B

Cut line

60（20）0449 SE-77 53 43 45 82 67ç

60（20）2010

048604880489

SEN- 66SEN-100SEN-140

255677

70112150

637685

ç

ç

ç

※

※


COUPLERSJ


Unit ： mm

Dimensions


A

B

C

60（20）60（20）20（20）10（10）

0441044204430444

SJ- 66SJ- 77SJ-100SJ-140

7185109146

62677584

50506690

ç

ç

ç

ç

※

17 18

SADDLE for FLEXIBLE ELL SFSFS SF FLEXIBLE ADAPTORSFJ

Unit ： mm

Dimensions

Unit ： mm

Dimensions

Unit ： mm

Dimensions

FLEXIBLE ELL with End CuffsSF

Unit ： mm

Dimensions

2M FLEXIBLE ELL with Raw EndsSF

Pcs/PkgCode No. Item No. A B L1 L2

Direct connection to Direct connection to SLIMDUCT SDSLIMDUCT SD

Direct connection to SLIMDUCT SD


A2000

B

2020

2020

105

04510452

04530454

04550456

SF- 66- 500SF- 66-1000SF- 66-2000SF- 77- 500SF- 77-1000SF- 77-2000SF-100- 800SF-140- 800

626262747474100146

5858586262627086

4951033200049510332000800800

7474－7272－7080

T（min）0.30.30.30.30.30.30.40.3

ç

ç

ç

ç

ç

ç

ç

ç

1010

04590460

SF-66-2000SF-77-2000

6274

5862

ç

ç

● Material … PE+EVA（66 / 77） PP （100 / 140）

● Material … SUS304 ※ Use in combination with SFS.※ For secure joint, insert 2 corrugations of SF into SFJ adaptor.

● Material … PE※ Use only in conjunction with SFJ Coupler and SFS Clamp.

Vertical Application

Horizontal Application

Pcs/PkgCode No. Item No.60604040

0611061206130614

SFS- 66SFS- 77SFS-100SFS-140

ç

ç

ç

ç


B

A C

202020

043604370438

SFJ- 66SFJ- 77SFJ-100

6883108

62.166.174.1

353540

ç

ç

ç

Max 45°

Max 90°

DO NOTBEND MORE THAN 90°

DO NOTBEND OVER PARAPET

■ Application example for 　 FLEXIBLE ELL

■ Specification ■ The table below shows the maximum size lineset combinations that can be contained in SLIMDUCT SD:Temperature Range

Application

Material

Color

－２０℃～６０℃Wall Mounted

Rigid Polyvinyl Chloride

IvoryGrayBrownWhiteBlack

InsulationThickness

SD- 66

SD- 77

SD-100

SD-140

１０×１０㎜

φ6.35×φ9.52

φ9.52×φ15.88

φ9.52×φ19.05

φ19.05×φ31.75 φ19.05×φ31.75

（φ19.05×φ22.22）or（φ6.35×φ9.52）

×2 sets

（φ6.35×φ12.70 andφ9.52×φ15.88）× 2 sets

１０×２０㎜２０×２０㎜

※ 10mm type of insulation thickness for φ6.35mm and φ9.52mm is 8mm.　 Piping system includes DRAIN HOSE （DH-16）.

※ Excludes some items. ・ Most components are PVC, when other materials are used they will be listed under the component description.

Caution ●SLIMDUCT SD IS NOT WATERPROOF. To waterproof, seal all longitudinal and lateral seams, screw heads and wall penetration with weatherproof sealant or putty.

● SLIMDUCT SD duct and fittings are suitable for use and storage within a temperature range of －20℃ to 60℃. Deformation may occur at temperatures exceeding 60℃. Protect SLIMDUCT installation from direct and radiant heat.

● When attaching SLIMDUCT to wall, USE ONLY PAN HEAD SCREWS. DO NOT USE FLAT HEAD OR COUNTERSUNK SCREWS AS THEY CAN EXERT TOO MUCH PRESSURE AND CRACK THE PVC MATERIAL.

● Use of impact screwdrivers to attach SLIMDUCT to wall and to tighten fixing screws on fittings is highly discouraged as they can easily overtighten the screws and crack the PVC material. Use hand screwdrivers for precise torque control.

● Use SL-300 STRAP KIT to retain lineset inside duct.

※ Exclude some items

STRAP KITSL For SLIMDUCT

Unit ： mm

Dimensions

● Material … PE（SL band）, POM（SL saddle）※ Do not overtighten strap! This may decrease insulation performance.

SL saddle（POM）

SL band（PE）

Pcs/PkgCode No. Item No.50004720 SL-300ç

A B C E6075100146

58637085

18182222

4477

t111.51.5

C A

B

tφE

30012

176.5 2

22

159

31

φ4


A

B

L1L2

T（min）

Unit ： mm

Dimensions

WALL FLANGESWC

Unit ： mm

Dimensions

SOFFIT INLETSP

● Material … ABS ● Material … ABS

Pcs/PkgCode No. Item No. A B C D2020105

7341734273437344

SP- 66SP- 77SP-100SP-140

6681106146

62677484

95110135175

125130137147

E95100107117

ç

ç

ç

ç

Pcs/PkgCode No. Item No. Diameter of core drill1001005020

0481048204830484

SWC- 66SWC- 77SWC-100SWC-140

7085110145

ç

ç

ç

ç

DB

A C E

4010 6

F

G

30

φ4

C

D

B

A 7020

E

7

A6883108148

B66717888

C110127174220

D108115144180

E6480104144

F92110140196

G7290114154

19 20

Unit ： mm

Dimensions

A

B

C

ABS

WALL INLETSW

WALL INLET for A/C CapSWM

Pcs/Pkg4

Code No. Item No.05253 SW-77-A

A B C D E83 66 110 205 77ç

Unit ： mm

Dimensions

WALL INLET for A/C with VentilationSWK

Unit ： mm

Dimensions

Unit ： mm

Dimensions

Pcs/Pkg4

Code No. Item No.05263 SWM-77-A

A B C D E146.5 82 188 67 84

Applicable A/C capAC-67,75,100／WC-60N,65N,75N

ç

D E

C

BA

Pcs/Pkg4

Code No. Item No.05273 SWK-77-Aç

A

J

D E HIF

B C G

A B C D E205 116 127 20 77

F104

G82.5

H40

I158

J67

C

D

A

B

E

Unit ： mm

Dimensions

Pcs/Pkg2

Code No. Item No.05243 ASD-77

A B C D E75 63 60 76 56ç

SLIMDUCT ASDASD Ducting

BE

D

C A

2000

AL

90° FLAT ELLSK

Unit ： mm

Dimensions

90° VERTICAL ELLSC

COUPLERSJ

■ The table below shows the maximum size lineset｠combinations that can be contained in SLIMDUCT ASD :

■ Specification

※1：Required to cut SE at the cut line.

φ6.35×φ9.52DH-14 or DH-16

φ6.35×φ12.70DH-14 or DH-16

φ9.52×φ15.88DH-16

Pattern Pipe Containable Reference SE-77-A

1

2

3

◎

◎

○

Item Material （Surface treatment） Color

Duct

Fittings

Aluminum（Anodized）

ABS（Acrylic urethane）

Bronze

Bronze

※1

ABS

ABS

Lineset combinations and temperature range are equivalent to SLIMDUCT SD series. Refer to table on page 20.

ABS

Pcs/Pkg4

Code No. Item No.05283 SK-77-A

A B C83 66 128

D20ç

DC

B C

A φ4

Pcs/PkgCode No. Item No. A B C405293 SC-77-A 81 67 100

D20ç

ABS

Pcs/PkgCode No. Item No. A B C405303 SJ-77-A 85 67 50ç

END FITTINGSE

Unit ： mm

Dimensions

ABS


C D

A

E B

Cut line

405343 SE-77-A 53 43 45 82 67ç

Unit ： mm

Dimensions

ABS

A

B

D

C

Caution

Premium Model

A luxury SLIMDUCTTM model catering to the high end of the market

Aluminum & ABS Duct

Attractive High Gloss FinishSLIMDUCT ASD is fabricated from high grade anodized Aluminum and the fittings are fabricated from a special high grade ABS for superior UV and weather resistance to ensure long term protection for the linesets from the elements, vandalism and pest damage.

Protective

SLIMDUCT ASDAlmost no changes in SLIMDUCT

PAIRCOIL

SL STRAP KIT

DRAIN HOSE

Base

Cover

＊Aluminum=Duct / ABS=Fittings

＊

＊

Years later

Taped Lineset InstallationOver the long term, tape will deteriorate exposing lineset, damaging appearance and reducing efficiency of the A/C system.

SLIMDUCT ASD offers a new level of enhanced appearance and sophistication while it protects and beautifies an exposed lineset on any split type A/C system.

SLIMDUCT ASDSLIMDUCT ASD

Years later

Extra Thermal Resistance

Simple 3 step installation :1. Secure SLIMDUCT ASD & fitting bases｠to wall.

2. Install lineset and drain hose.

3. Clip on duct cover and secure fitting covers with screws.

Easy & Quick Installation

SLIMDUCT ASD has been installed in many residential and commercial applications as well as public buildings.

SLIMDUCT Acknowledged and Welcomed Worldwide High Reliability and Excellent Track RecordINABA DENKO pioneered the concept of｠ PVC lineset ducting worldwide in the 1980's and have been responsible for a number of major new developments in this area. Today we are the world's largest manufacturer of these products and export the most extensive range of products to over 20 countries.

ToughTough！ToughTough！Tough！

A combination of Aluminum duct and ABS fittings gives the ASD product line superior thermal resistance over the conventional PVC SD series.

21 22

MD-751 MD-751

Ivory Neo White

The appearance of the duct and fittings is enhanced because there are no visible screwheads.

No Visible Screws

Blend in well with the overall color scheme of the interior, or exterior, of any building.

Neutral Colors

Complete Versatility to Suit Any Indoor Environment

SLIMDUCT MD is designed for ease of application as well as to facilitate the use of insulated drain hose which is used more frequently （by a factor of 300%） in indoor applications.

Accomodates larger diameter insulated drain hose required for interior installations 14 different fittings enable SLIMDUCT MD to

easily be customized to suit a wide variation of interior wall finishes and configurations.

Large Range of Fittings

Optional Gasket for joint between MD duct and indoor unit

Finished appearance

SLIMDUCT SD SLIMDUCT MD

※This fitting may not be suitable for use with certain models of 　indoor units.

MD-851

Neo White

Standard drain hose（outdoor use）

Insulated drain hose（indoor use）

Stylishly designed, SLIMDUCTTM MD series will compliment any interior or exterior design scheme

InnovationInnovation Discreet Interior Design


Flame Retardant

＊ Excludes some items. In house testing based on UL-94-V-0.

SLIMDUCT MD conforms to the requirements of UL-94-V-0.＊

Rubber Gasket MG is used to enhance the appearance of the joint between the indoor unit and the SLIMDUCT MD.

● RUBBER GASKET

SAFETY &

SAFETY &

　　　BEAUTY

　　　BEAUTYSAFETY &

SAFETY &

　　　BEAUTY

　　　BEAUTYSAFETY &

　　　BEAUTY

Lineset Ducting System

Cross section

ExtendExtendExtend

TwistTwistTwist

Finished appearance

● Cap for screw

23 24

Unit : mm

Dimensions

Unit : mm

Dimensions

Shows how cap conceals screw

Unit : mm

Dimensions


Unit : mm

Dimensions

Unit : mm

Dimensions

Unit : mm

Dimensions


A8090

B6873

C141141

D207～263209～266

E73.578

F8590

G201～257203～260

6117261185

MWS-75-LMWS-85

ç

ç

φ4.2EC

F

B

D G

A



※Plastic cap is included so screw head is not exposed.

※ Plastic cap is included so screw head is not exposed.

※ Plastic cap is included so screw head is not exposed.

55

B64.870

C73.182.4

A7585

6103261045

MD-751MD-851

ç

ç

MD-751 MD-751 MD-851


A8090

B7075

C103123

D106.5128.5

E73.578

F70.580

G2227

H7080

I89.5102.5

J1120

6110261145

MW-75MW-85

ç

ç

Pcs/PkgCode No. Item No. A B C D E F G H I J K

A

C E φ4I

FH K

JG

Cap for screw

BD

φ4

202010

808090

707075

126146.5146.5

150177177

73.573.578

151515

262727

98108113

757585

202020

124151151

611126112261155

MWM-75-SMWM-75-LMWM-85

ç

ç

ç

200050 100B

AC

Ivory Neo White

Compliant itemOthers : Flange O.D. ～φ108mm + H ～8mmOthers : Flange O.D. ～φ136mm + H ～10mmOthers : Flange O.D. ～φ136mm + H ～10mm

AC-67,75AC-67,75,100／WC-60N,65N,75NAC-67,75,100／WC-60N,65N,75N

Unit : mm

Dimensions

Unit : mm

Dimensions


A8090

B7075

C114124

6120261215

MK-75MK-85

ç

ç


A8090

B7075

C9296

6140261415

MCI-75MCI-85

ç

ç


A8090

B7075

C103109

6130261315

MCO-75MCO-85

ç

ç


A8090

B7075

C6368

6125261265

MKF-75MKF-85

ç

ç

15

φ4

C

A

B

C

15 B

A

45°

φ4

A 1540

2-φ4 B C

A 15

B

C

25

φ4

C H

A

DB

E

15F I

JG

φ4

Unit : mm

Dimensions

75 : 7575 : 75mmmm～130～130mmmm85 : 8085 : 80mmmm～135～135mmmm75 : 75mm～130mm85 : 80mm～135mm

MCS

G F E

B

DC

A

Min use

Max use


A8090

B6873

C9296

D3939

E75～13080～135

F6873

G8090

6142261435

MCS-75MCS-85

ç

ç

WALL INLETMW

SLIMDUCT MDMD Ducting

WALL INLET for A/C CapMWM

EXTENDABLE WALL INLETMWS

90° FLAT ELLMK 45° FLAT ELLMKF

90° INSIDE VERTICAL ELLMCI 90° OUTSIDE VERTICAL ELLMCO

ADJUSTABLE 90° VERTICAL ELLMCS

SLIMDUCT MDSLIMDUCT MD

Can be adjusted to correct upto 255mm Can be adjusted to correct upto 255mm misalignment of wall openingmisalignment of wall openingCan be adjusted to correct upto 255mm misalignment of wall openingImage

● Material … ABS25 26

Unit : mm

Dimensions

Unit : mm

Dimensions

Unit : mm

Dimensions

Unit : mm

Dimensions

Unit : mm

Dimensions


A7592

B6577

6160261615

MF-75MF-85

ç

ç


A90

B75

C45

D30

E97

F8261665 MFJ-85ç

A

1000

B

0.7

B C

D φ4

F

EA

● Material … PE+EVA※ Use MF in combination with MJ coupler or ell at either end.　（MF-85 requires MFJ adaptor.）

● Material … Rubber　 ● Color … Neo White※ The MG RUBBER GASKET may not be suitable for use with indoor A/C units from all manufacturers due to differing surface and shape configurations.


A8090

B7075

6150261515

MJ-75MJ-85

ç

ç

60

1515

B

A

φ4

※Easy to cut to required length

40A

B

C


A8192

B6975

C110120

D132135

E102110

F2015

MaterialABSPVC

6180261815

MP-75-IMP-85

ç

ç

D

B30

E

A F70

7C

φ4


A8090

B7883

C2725

6154261575

MG-75SMG-85

ç

ç

Before After

Caution ●SLIMDUCT MD duct and fittings are suitable for use and storage within a temperature range of －20℃ to 60℃. Deformation may occur at temperatures exceeding 60℃.

●When attaching SLIMDUCT MD to wall, USE ONLY PAN HEAD SCREWS. DO NOT USE FLAT HEAD OR COUNTERSUNK SCREWS AS THEY CAN EXERT TOO MUCH PRESSURE AND CRACK THE PVC MATERIAL.

● Use of impact screwdrivers to attach SLIMDUCT MD to

wall and to tighten fixing screws is highly discouraged as they can easily overtighten the screws and crack the PVC material. Use hand screwdrivers for precise torque control.

● Use SL-300 STRAP KIT to retain lineset inside duct.● SLIMDUCT MD IS NOT WATERPROOF. For external use, seal all longtitudinal and lateral seams, screw heads and wall penetrations with weatherproof sealant or putty.

■ Specification

■ Typical Soffit Installation

MDMWMKMCIMCOMFMGMCS

・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・

・・・・・・・・・・・・・・・・・・・

・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・

・・

ⒶⒷⒸⒹⒺⒻⒼⒽ

SLIMDUCT MD WALL INLET90° FLAT ELL90° INSIDE VERTICAL ELL90° OUTSIDE VERTICAL ELLFLEXIBLE ELLRUBBER GASKETADJUSTABLE 90° VERTICAL ELL

Temperature Range

ApplicationMaterial

Color

－20℃～60℃

Wall Mounted

Rigid Polyvinyl Chloride（UV Stabilized and Fire Resistant）

Item No.MD-751

MD-851

Insulation Thickness　10×10mm6.35×9.52 ～ 6.35×12.70＋DSH-14

Ivory （Silky White）Neo White

Neo White

MD-751

MD-851

※Excludes some items

※Excludes some items

Ventilation hose（O.D. less thanφ37）＋ 6.35×9.52 ～ 6.35×12.70＋DSH-14or 6.35×9.52 ～ 9.52×15.88＋DSH-14

Typical Installation

Unit : mm

Dimensions


A154169

B4045

C4045

6113261565

MN-75MN-85

ç

ç

AB

A

25

C

B

25

C

φ4.2

φ4.2

φ4.2

Combinatorial view

MN-75 MN-85

MN-75 MN-85

More than 130mm from Soffit 75 to 130mm from Soffit Less than 75mm from Soffit

MCO MCI

130130mmmm～130mm～

MCS

7575mmmm～130～130mmmm75mm～130mm

MF

～7575mmmm～75mm

COUPLERMJ FLEXIBLE ELLMF

FLEXIBLE ADAPTORMFJ SOFFIT INLETMP

RUBBER GASKETMG90° SHAPE CHANGE ELBOWMN

GA

B

A

C

MD

MG

MK

MD

MW

SLIMDUCT MDSLIMDUCT MD

■ Typical Detail of Indoor Installation （MD-751）Wall penetration is located below indoor unit at left when facing unit.

■ The table below shows the maximum size lineset combinations that can be contained in SLIMDUCT MD :

27 28

Innovative Lineset Ducting SystemInnovative Lineset Ducting Systemfor VRF Installationsfor VRF Installations

Beautiful Finish

Sophisticated

Commercial & Multiple Lineset Ducting System


Multiple Applications

Racking SLIMDUCT RD

＊1. Excludes some sizes.

Long Lasting Rugged Protection

Load Capacity

Scratch / Abrasion Resistance

Durability & Weather Resistance

The high quality finish of the SLIMDUCT RD series blends in well with commercial buildings. The exterior of any building will be enhanced by the sleek appearance of the finished installation.

Because of it’s compact design, SLIMDUCT RD requires less space than a conventional racking system.

Compact

No special tools are required to assemble and connect SLIMDUCT RD series.

Easy Installation

Use of the many fittings available such as risers, vertical mountings and underslab mountings enables SLIMDUCT RD to be easily customized on site during the installation process.

The coating layer contains a higher proportion of Magnesium and is more rigid than that of a standard galvanized or Galvalum sheet. It offers superior scratch/abrasion resistance as well as advanced corrosion resistance to ensure that any scratches will be covered by a zinc protective film in a few months.

SLIMDUCT RD series is fabricated from “ZAM” which offers superior resistance over stainless steel even in highly corrosive atmospheres such as sea air.

SLIMDUCT RD, WALKWAY TYPE （RDWK） has the top surface coated with a roughened anti slip surface. This permits maintenance personnel to walk on the ducts without damaging them or the linesets during routine maintenance of any mechanical equipment on the rooftop.

Innovative Lineset Ducting SystemInnovative Lineset Ducting Systemfor VRF Installationsfor VRF Installations

Innovative Lineset Ducting Systemfor VRF Installations

＊1

SLIMDUCT RD series is fabricated from “ZAM” a highly corrosion resistant hot SLIMDUCT RD series is fabricated from “ZAM” a highly corrosion resistant hot dip galvanized steel which is equal to or exceeds the corrosion resistance dip galvanized steel which is equal to or exceeds the corrosion resistance properties of standard hot dip galvanized steel （HDZ55） or Galvalum （AZ150）.properties of standard hot dip galvanized steel （HDZ55） or Galvalum （AZ150）.

SLIMDUCT RD series is fabricated from “ZAM” a highly corrosion resistant hot SLIMDUCT RD series is fabricated from “ZAM” a highly corrosion resistant hot dip galvanized steel which is equal to or exceeds the corrosion resistance dip galvanized steel which is equal to or exceeds the corrosion resistance properties of standard hot dip galvanized steel （HDZ55） or Galvalum （AZ150）.properties of standard hot dip galvanized steel （HDZ55） or Galvalum （AZ150）.

SLIMDUCT RD series is fabricated from “ZAM” a highly corrosion resistant hot dip galvanized steel which is equal to or exceeds the corrosion resistance properties of standard hot dip galvanized steel （HDZ55） or Galvalum （AZ150）.

29 30

Unit ： mm

Dimensions

Unit ： mm

Dimensions

SLIMDUCT RDSLIMDUCT RD

SLIMDUCT RDRD







Pcs/Pkg111111111

Code No. Item No. Height（H）Width（W）Length（L）ç

ç

ç

ç

ç

ç

ç

ç

ç

770177702777037850158506585117844858447584467

RD-150-A-ZARD-150-1-A-ZARD-150-05-A-ZARD-300-ZARD-300-1-ZARD-300-05-A-ZARD-300H-ZARD-300H-1-ZARD-300H-05-A-ZA

111

131

251

150

300

300

2.0m1.0m0.5m2.0m1.0m0.5m2.0m1.0m0.5m

111111111111111111

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

850258507585127850468509685147850358508585137850568510685157890158902584857892668927684867

RD-450-ZARD-450-1-ZARD-450-05-A-ZARD-450H-ZARD-450H-1-ZARD-450H-05-A-ZARD-600-ZARD-600-1-ZARD-600-05-A-ZARD-600H-ZARD-600H-1-ZARD-600H-05-A-ZARD-900-ZARD-900-1-ZARD-900-05-A-ZARD-900H-ZARD-900H-1-ZARD-900H-05-A-ZA

131

251

131

251

131

251

450

450

600

600

900

900

2.0m1.0m0.5m2.0m1.0m0.5m2.0m1.0m0.5m2.0m1.0m0.5m2.0m1.0m0.5m2.0m1.0m0.5m

Pcs/Pkg

111111111111111111111111

Code No. Item No. Length（L）

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

805358061580695805758065580735805458062580705805858066580745805558063580715805958067580755805658064580725806058068580765

RDWK-300-ZARDWK-300-1-ZARDWK-300-05-ZARDWK-300H-ZARDWK-300H-1-ZARDWK-300H-05-ZARDWK-450-ZARDWK-450-1-ZARDWK-450-05-ZARDWK-450H-ZARDWK-450H-1-ZARDWK-450H-05-ZARDWK-600-ZARDWK-600-1-ZARDWK-600-05-ZARDWK-600H-ZARDWK-600H-1-ZARDWK-600H-05-ZARDWK-900-ZARDWK-900-1-ZARDWK-900-05-ZARDWK-900H-ZARDWK-900H-1-ZARDWK-900H-05-ZA

2.0m1.0m0.5m2.0m1.0m0.5m2.0m1.0m0.5m2.0m1.0m0.5m2.0m1.0m0.5m2.0m1.0m0.5m2.0m1.0m0.5m2.0m1.0m0.5m

Height（H）

Width（W1）

Width of mineral coating anti-slip tape（W2）

134

254

134

254

134

254

134

254

186

186

288

288

388

388

392

392

300

300

450

450

600

600

900

900

※Do not use for vertical applications.

























※Baseplate shown in the picture is 　an optional accessory.

SLIMDUCT RD ‒ WALKWAY（Anti-slip coating）RDWK Special Order Only !

※For vertical applications, do not use brackets when mounting size 600H and 900H to wall. In vertical applications when mounted direct to wall, size 900H cannot be used with elbows. If duct needs to be raised from wall surface, use a baseplate RDB, REB, RFB, RTS,｠or RJB. Contact INABA for further details.※Size 600（H） & 900（H） are supplied reinforced to prevent deflection as standard. This is an optional accessory on size 450（H）.

Anti-slip sheet

※Baseplate shown is an optional accessory 　for all sizes except RD-15-05, which 　includes the baseplate.

Ducting

Ducting

Examples of Typical Installations

31 32

Unit ： mm


Unit ： mm

Unit ： mm

Pcs/Pkg11111111

Code No. Item No.8475584775847958905584515848158483589305

RCⅠ-300-ZARCⅠ-450-ZARCⅠ-600-ZARCⅠ-900-ZARCⅠ-300H-ZARCⅠ-450H-ZARCⅠ-600H-ZARCⅠ-900H-ZA

Height（H）131131131200251251251320

L 260260260378380380380498

Width（W）300450600980300450600980

ç

ç

ç

ç

ç

ç

ç

ç

WL

LH

L

LW

H



300～600（H） 900（H）

W

L

LH

※To connect between elbow parts on size 900H use RXJ, contact 　INABA DENKO for further details.

Pcs/Pkg1set1set1set1set1set1set1set

1set

Code No. Item No.771458531585325853358466585345853558966589675

RCF-150-ZARCF-300-ZARCF-450-ZARCF-600-ZARCF-300H-ZARCF-450H-ZARCF-600H-ZA

RCF-900H-ZA

Height（H）111131131131251251251

251

L 111147147147197197197197203

Width（W）150300450600300450600

900

ç

ç

ç

ç

ç

ç

ç

ç

ç

Part No.－－－－－－－

RCF I -900H-ZARCFO-900H-ZA

W L

L

H

For inside × 1 pc.For outside × 1 pc.Baseplate × 1 pc.＊ Except 900（H）

Contents


90°INSIDE VERTICAL ELLRCI

90°VERTICAL ELL （SIZE 150）RC

45°VERTICAL ELLRCF

Unit ： mm

TELESCOPIC COUPLERRSS

Unit ： mm

Pcs/Pkg11111111

Code No. Item No.8476584785848058906584525848258484589315

RCO-300-ZARCO-450-ZARCO-600-ZARCO-900-ZARCO-300H-ZARCO-450H-ZARCO-600H-ZARCO-900H-ZA

Height（H）131131131200251251251320

L 281281281378401401401498

Width（W）300450600980300450600980

ç

ç

ç

ç

ç

ç

ç

ç



300～600（H） 900（H）

※To connect between elbow parts on size 900H use RXJ, contact 　INABA DENKO for further details.

90°OUTSIDE VERTICAL ELLRCO

W

L

L

H

L

H

W

L

Unit ： mm

11111111

8083580845808558961580865808758088589625

RFWK-300-ZARFWK-450-ZARFWK-600-ZARFW-900-ZARFWK-300H-ZARFWK-450H-ZARFWK-600H-ZARFW-900H-ZA

134134134200254254254320

327393456558327393456558

186288388368186288388368

300450600980300450600980

ç

ç

ç

ç

ç

ç

ç

ç

Pcs/PkgCode No. Item No. Width（W1）

Height（H） L

Width of mineral coating anti-slip

tape（W2）

300～600（H） 900（H）

W1

H

L

L

W2W1

W2H

LL









45°FLAT ELL ‒ WALKWAYRFWK Special Order Only !

Pcs/Pkg1

Code No. Item No.77135 RC-150-ZA

Height（H）111

L210

Width（W）150ç

※Includes 2 extra parts which allow this fitting to be used as an Inside vertical ell 　or an Outside vertical ell.

Unit ： mm

L

W

H

※Size 600H is supplied reinforced to prevent deflection as standard. 　This is an optional accessory on size 450H.※Use RX-900（H） as flat ell for size 900（H）.

Pcs/Pkg1111111

Code No. Item No.77115851678517785187844978519785207

RE-150-ZARE-300-A-ZARE-450-A-ZARE-600-A-ZARE-300H-A-ZARE-450H-A-ZARE-600H-A-ZA

Height（H）111131131131251251251

L 250500650800500650800

Width（W）150300450600300450600

ç

ç

ç

ç

ç

ç

ç

90°FLAT ELLRE

Unit ： mm

※Size 600H is supplied reinforced to prevent deflection as standard. This is an optional accessory on 　size 450H.※To connect between elbow parts on size 900H use RXJ, contact INABA DENKO for further details.※Height of stand for size 900（H） is 30mm lower than ducting.

Pcs/Pkg111111111

Code No. Item No.771258521785227852378904584507852478525789295

RF-150-ZARF-300-A-ZARF-450-A-ZARF-600-A-ZARF-900-ZARF-300H-A-ZARF-450H-A-ZARF-600H-A-ZARF-900H-ZA

Height（H）111131131131200251251251320

L 131327393456558327393456558

Width（W）150300450600980300450600980

ç

ç

ç

ç

ç

ç

ç

ç

ç

150～600（H）

900（H）

W

H

L L

W

H

LL



45°FLAT ELLRF

Unit ： mm

L

W2

W1

H

※Use RXW-900（H） as flat ell for size 900（H）.

111111

807758078580795808058081580825

REWK-300-ZAREWK-450-ZAREWK-600-ZAREWK-300H-ZAREWK-450H-ZAREWK-600H-ZA

134134134254254254

500650800500650800

186288388186288388

300450600300450600

ç

ç

ç

ç

ç

ç

Pcs/PkgCode No. Item No.Width（W1）

Height（H）

LWidth of mineral coating anti-slip

tape（W2）







90°FLAT ELL ‒ WALKWAYREWK Special Order Only !

RCFI

RCFOL

L

LayoutFlange nut M6

45°VERTICAL ELL Base

45°VERTICAL ELL Base

20 Truss screwM6×15L

BushBaseBase

L

Ditch guideDitch guideDitch guide

Truss screw M6×20L

Splint Truss screw M6×20L

Truss screw M6×15LBushL

Base

Flange nut M6

Outer cover

Inner cover

D

D

E

B

C

A

3-φ12

4-φ8

Pcs/Pkg111111111111

Code No. Item No.856378564785657856678567785687856978570785717849378494784957

RSS-300-1-A-ZARSS-300-2-A-ZARSS-300-3-A-ZARSS-450-1-A-ZARSS-450-2-A-ZARSS-450-3-A-ZARSS-600-1-A-ZARSS-600-2-A-ZARSS-600-3-A-ZARSS-900-1-A-ZARSS-900-2-A-ZARSS-900-3-A-ZA

A

295

445

595

895

B

105

C

060

D160260360160260360160260360160260360

E

266

416

566

866

L 20～120120～220220～320 20～120120～220220～320 20～120120～220220～320 20～120120～220220～320

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç




Pcs/Pkg111111111111

Code No. Item No.845978460784617857278573785747857578576785777849678497784987

RSS-300H-1-A-ZARSS-300H-2-A-ZARSS-300H-3-A-ZARSS-450H-1-A-ZARSS-450H-2-A-ZARSS-450H-3-A-ZARSS-600H-1-A-ZARSS-600H-2-A-ZARSS-600H-3-A-ZARSS-900H-1-A-ZARSS-900H-2-A-ZARSS-900H-3-A-ZA

A

295

445

595

895

B

225

C

140

D160260360160260360160260360160260360

E

266

416

566

866

L 20～120120～220220～320 20～120120～220220～320 20～120120～220220～320 20～120120～220220～320

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç




※RSS cannot be connected directly into a WALKWAY elbow unless it is extended to its maximum length and is attached using the outer edges of the slotted fixing 　holes along its sides and bottom.※TELESCOPIC COUPLER ‒ WALKWAY is a non standard item, only available on special order.※When connecting RSS to 2m or 1M lengths of RD duct or to 45º elbow RCF, the included baseplate can be used. If RSS needs to be connected to any other 　fitting, a baseplate will have to be purpose made on site.

33 34

Unit ： mm



8553785547855578491784557855678557784927

RSJ-300-A-ZARSJ-450-A-ZARSJ-600-A-ZARSJ-900-A-ZARSJ-300H-A-ZARSJ-450H-A-ZARSJ-600H-A-ZARSJ-900H-A-ZA

295445595895295445575895

105105105105225225225225

60606060140140140140

ç

ç

ç

ç

ç

ç

ç

ç

Stand fixed plate Base

Inner cover

Truss screwM6×15L

Outer cover

Truss screwM6×20L

Washer

B

60

60

C

A

46Special Order Only !



8558785597856078487784567856178562784887

RFJ-300-A-ZARFJ-450-A-ZARFJ-600-A-ZARFJ-900-A-ZARFJ-300H-A-ZARFJ-450H-A-ZARFJ-600H-A-ZARFJ-900H-A-ZA

295445595895295445595895

105105105105225225225225

60606060140140140140

ç

ç

ç

ç

ç

ç

ç

ç



COUPLERRSJ-A For standard length duct & elbow parts

Unit ： mm

FREE COUPLERRFJ-A For cutting part of duct（Mounted on the wall in case of vertical installation.）

＊1 To attach 900H ells, use only RXJ coupler.

＊1 To attach 900H ells, use only RXJ coupler.

＊1

＊1

＊1

＊1

B

60

60

C

A

Stand fixed plate Base

Inner cover

Truss screwM6×15L

Outer cover

Truss screwM6×20L

Unit ： mm

Pcs/Pkg1111111

Code No. Item No.77155853678537785387845378539785407

RT-150-ZART-300-A-ZART-450-A-ZART-600-A-ZART-300H-A-ZART-450H-A-ZART-600H-A-ZA

Height（H）111131131131251251251

D250500650800500650800

L 35070085010007008501000

Width（W）150300450600300450600

ç

ç

ç

ç

ç

ç

ç

111111

808958090580915809258093580945

RTWK-300-ZARTWK-450-ZARTWK-600-ZARTWK-300H-ZARTWK-450H-ZARTWK-600H-ZA

134134134254254254

500650800500650800

186288388186288388

300450600300450600

ç

ç

ç

ç

ç

ç

Pcs/PkgCode No. Item No.Width（W1）

Height（H）

D

70085010007008501000

LWidth of

mineral coating anti-slip tape（W2）






Special Order Only !D

W1

L

H

W2

Pcs/Pkg111

Code No. Item No.846558541585425

RX-300H-ZARX-450H-ZARX-600H-ZA

W300450600

H251251251

Branch fittingSize 300 × 2 pcs.Size 450 × 2 pcs.Size 600 × 2 pcs.

L500650800

ç

ç

ç

L

W

H

Unit ： mm

Unit ： mm

TEERT

TEE ‒ WALKWAYRTWK

CROSSRX

※Use RXW-900（H） as tee for size 900（H）.

※Use RX-900（H） as tee for size 900（H）.

※Use only with standard RD duct, not H type. RX has a fixing tab which mates up 　with a corresponding hole on end of RD duct. If RD duct is cut to length on site, 　the hole for fixing screw to RX will no longer be present and joint cannot be secured.※This fitting can be used as a tee when required. Close unused opening with 　the attached plate.※Height of stand for cross is 30mm higher than ducting.

DW

L

H

Special Order Only !Special Order Only !


Pcs/Pkg11


RX-900-ZARX-900H-ZA

Height（H）197317

Width（W）980980

ç

ç

Pcs/Pkg11


RXW-900-ZARXW-900H-ZA

Width（W2）392392

Height（H）200320

Width（W1）980980

ç

ç

WW

H

W1

W2

W1

W2

H





CROSS SIZE 900RX CROSS SIZE 900 ‒ WALKWAYRXW

※Height of stand for RX / RXW is 30mm lower than ducting.※This fitting can be used as 90º FLAT ELL or TEE. Close unused openings with 　the attached plates.

Reinforced plate

Plate

Reinforced plate for walkway

Reinforced plate

Plate

Unit ： mm Unit ： mm

REDUCER for H Series DuctRR

Unit ： mm

Unit ： mm

※Baseplate is not available for REDUCER.　For applications to vertical wall, do not use brackets to mount RR Reducer. 　To connect RR reducer to any other fitting, a baseplate will have to be purpose made on site.

Pcs/Pkg1111111111111

Code No. Item No.85435854478545785467848978454788957854878896785507855278551784907

RR-300-150-ZARR-450-300-A-ZARR-600-300-A-ZARR-600-450-A-ZARR-900-600-A-ZARR-300H-300-A-ZARR-450H-300H-A-ZARR-450H-450-A-ZARR-600H-300H-A-ZARR-600H-450-A-ZARR-600H-600-A-ZARR-600H-450H-A-ZARR-900H-600H-A-ZA

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç



REDUCERRR

※REDUCER is supplied concentric as standard. Eccentric types 　are available from INABA DENKO on special order.

111

889778547585495

RR-300H-150-ZARR-450H-300-ZARR-600H-300-ZA

ç

ç

ç


Cover

Bush

Truss screwM6×15L

Bigger duct

Smaller duct

Bigger duct

RD Stand

Smaller duct

Bush

Flange nut

REDUCER

Truss screwM6×15L

Inner cover

BushTruss screwM6×15L

Outer coverTruss screw

35 36


Dimensions

WALL FLANGERWP

WALL SLEEVERSB Use in combination with RWP

Pcs/Pkg111111111

Code No. Item No.771857511575165792058918684675768657935589466

RWP-150-ZARWP-300-ZARWP-450-ZARWP-600-ZARWP-900-A-ZARWP-300H-ZARWP-450H-ZARWP-600H-ZARWP-900H-A-ZA

L124241456471410144145647141014

L256160310400650160310400650

L3204363514664964363514664964

H1－242242242242362362362362

H2－192192192192312312312312

ç

ç

ç

ç

ç

ç

ç

ç

ç

Unit ： mm

Dimensions

L1

L3

164

L2 202

55

Size 150 Size 300（H）・450（H）・600（H）・900（H

φ6.5mm Countersunk hole

H1

H2

L1L2

L3 70※Contact surfaces on neck and flange include a factory fitted polyethylene foam gasket.

Assembly drawing

φ6 Tapping screw × 25

φ6 Tapping screw × 25



Pcs/PkgCode No. Item No. A B C D E F111111

858358584585855846358586585875

RSB-300-ZARSB-450-ZARSB-600-ZARSB-300H-ZARSB-450H-ZARSB-600H-ZA

391541691391541691

291441591291441591

878787207207207

228378528228378528

331481631331481631

147147147267267267

ç

ç

ç

ç

ç

ç

F

E D

BA

C50

5020

Unit ： mm ※Use CHAMBER BOX （CB） as wall sleeve for size 900（H）.

5

1.6t

Y part detail

2.3t 2.3t

F

120 45

Y part

Seal with curing putty around.

Size 150

Size 300（H）・450（H）600（H）・900（H）

Unit ： mm

RISER for RZM BRACKETRZB Use in combination with RZM

Pcs/Pkg20set20set10set10set

Code No. Item No.73695737057381573715

RZB-S-ZARZB-M-ZARZB-ML-ZARZB-L-ZA

A481220

TypeSMMLL

H100200320510

ç

ç

ç

ç

H

40

55 A-φ10.5

16 ■Anchor interval

Type300450600900

P（mm）306456626926

Cover（RZM）

Base（RZB）

P

Bracket Selector Table : 300（H）・450（H）・600（H）・900（H）● To select the combination of bracket and riser which gives the required height, refer to the list at right.

● If several combinations of bracket and riser give the desired height, the combination found in the column closest to the height will give the most practical selection.

● The combination of S Type RZB Risers and S Type RZM Brackets is only used for vertical wall mounted applications.

BRACKET for RD DUCTRZM Use in combination with RZB

Pcs/PkgCode No. Item No. AType B C H L t

Unit ： mm

Dimensions

22222222222222222222

7353573545735557356573575735857359573605738257383573845738557361573625736357364573655736657367573685

RZM-300-S-ZARZM-450-S-ZARZM-600-S-ZARZM-900-S-ZARZM-300-MS-ZARZM-450-MS-ZARZM-600-MS-ZARZM-900-MS-ZARZM-300-MM-ZARZM-450-MM-ZARZM-600-MM-ZARZM-900-MM-ZARZM-300-M-ZARZM-450-M-ZARZM-600-M-ZARZM-900-M-ZARZM-300-L-ZARZM-450-L-ZARZM-600-L-ZARZM-900-L-ZA

248398548848248398548848248398548848248398548848248398548848

S

MS

MM

M

L

195195195345195195195345195195195345195195195345195195195345

－－345600－－345600－－345600－－345600－－345600

128128128128178178178178270270270270328328328328478478478478

360510680980360510680980360510680980360510680980360510680980

1.41.41.42.01.41.41.42.01.41.41.42.01.41.41.42.02.02.02.02.0

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

300・450

600・900

AB

3-φ10.5

2-φ13×30Ｌ

60H

t

L

A’A

A－Ａ’ Cross section

H

ＡＡ’

LA 3-φ10.5

4-φ13×30L

CB

60

t

Ａ－Ａ’ Cross section






RZM-S Type RZM-MS Type RZM-M Type RZM-L TypeRZM-MM Type

590590590

540540540RZB-L

640640640

540540540

RZB-L

450450450

350350350

RZB-ML400400400

350350350RZB-ML

280280280

230230230RZB-M

180180180

130130130RZB-S

RZB-M

630630630

480480480

RZB-ML

750750750

480480480

RZB-L

940940940

540540540

480480480

530530530RZB-S

RZB-M

480480480

330330330

RZB-ML

600600600

350350350

RZB-L

790790790

540540540

330330330

380380380RZB-S

RZB-M

420420420

270270270

RZB-ML

540540540

350350350

RZB-L

730730730

540540540

270270270

320320320RZB-S

180180RZB-S230230

330330330

RZB-M

230230

950

900

850

800

750

700

650

600

550

500

450

400

350

300

250

200

150

100

Height（mm）

RZB-○

H2H2H2

H1H1

H2

H1STAND ‒ BASE RZB

STAND ‒ COVER RZM

※Notation

CUT-OFF WALL PLATERSP-A Use in combination with RWP

Unit ： mm

Dimensions

900H

Pcs/Pkg1111111

Code No. Item No.85787857978580784627858178582789497

RSP-300-A-ZARSP-450-A-ZARSP-600-A-ZARSP-300H-A-ZARSP-450H-A-ZARSP-600H-A-ZARSP-900H-A-ZA

A160310400160310400

B291441591291441591

C364514664364514664

D434584734434584734

E467.2617.2767.2467.2617.2767.2

F

192

312.4

G

278.6

398.6

H

87

207

I82.583.583.5

79.5

ç

ç

ç

ç

ç

ç

ç Special Order Only ! Refer the dimension

300（H） 600（H）

ABCDE

Seal with curing putty.

F

2-φ6.56-φ9

HI

20G

1.6t

72.3

Foaming seal891788

3204856509641067.2

398.6

382

221.4

193 156

312

86.4

4-φ6.516-φ9

Seal with curing putty.

1.6t

71.6

Foaming seal

Integral recess for sealan

t material


t material

facilitates caulking on site

,facilitates ca

ulking on site,

provides a reliable seal an

dprovides a re

liable seal and

improves durability

improves durability


t material


t material


,facilitates ca

ulking on site,


dprovides a re

liable seal and

improves durability

improves durability


t material


t material


,facilitates ca

ulking on site,


dprovides a re

liable seal and

improves durability

improves durability


t material


,


d

improves durability

Caulking materialapplied on site

Improves durability !!Improves durability !!

RSP-AWallWallWall

37 38

Unit ： mm

Unit ： mm

M6×15L

Bush

Unit ： mm


Pcs/Pkg1111

Code No. Item No.86285862958630589685

RZC-300-ZARZC-450-ZARZC-600-ZARZC-900-ZA

A195195345600

B248398548848

C268418568900

ç

ç

ç

ç

Pcs/Pkg222

Code No. Item No.861358617586215

RZ-150-M-ZARZ-150-L-ZARZ-150-LL-ZA

L280～480480～710710～940

ç

ç

ç

120100

L

50

80

160


Unit ： mm

Pcs/Pkg111111111

Code No. Item No.772158597585985859958833584645860058601588345

REC-150-ZAREC-300-ZAREC-450-ZAREC-600-ZAREC-900-ZAREC-300H-ZAREC-450H-ZAREC-600H-ZAREC-900H-ZA

L150296446596896296446596896

H111127127127127247247247247

A6060606060140140140140

ç

ç

ç

ç

ç

ç

ç

ç

ç

A

L

H



PLABASEPB Resin Pocket for Duct Brackets

Unit ： mm

Pcs/Pkg4030


PB-100PB-120

A85117

B100142.5

C154205.5

D100120

ç

ç

PB-100

PB-120

D

C

B

A

D

C

B

A

※Material…PP

Pcs/Pkg10

Code No. Item No.14230 PBG-120ç

Unit ： mm

Dimensions

205.52

RUBBER SHEET for PLABASEPBG

●Material … Natural rubber

（Not for vertical installation）SINGLE BRACKET for Horizontal Installations （SIZE 150）RZ-150 DUPLEX BRACKETRZY

WALL BRACKET for Vertical Installations （SIZE 150）RZW Lineset Support StrutRD LINESET SUPPORT STRUTRDK

Unit ： mm

（For use with RZB-M, RZB-ML or RZB-L）PIPE BRACKETRDY END CAPREC

Unit ： mm

BRACKET ATTACHMENT PLATE for VERTICAL ELLRZC

Pcs/Pkg2

Code No. Item No.77235 RZW-150-ZAç

80150

L50

※Use RZM-S + RZB-S except the size 150.

Pcs/Pkg11


RDY-300-ZARDY-450-ZA

A266416

ç

ç

160

80

50

78

A14.2

7070

70

M8×12

W×12／83

AB

C

60

60

60

Pcs/Pkg222

Code No. Item No.862558626586275

RZY-300-ZARZY-450-ZARZY-600-ZA

ç

ç

ç

Pcs/Pkg221

Code No. Item No.748657488574845

RDK-300-ZARDK-450-ZARDK-600-ZA

Compliant duct size300（H）450（H）600（H）

ç

ç

ç

※Use L or LL type of RZB and RZM.

Specification

39 40


Caution

Caution

Caution

Technical Data

Caution

【REFERENCE TABLES FOR LINESET CAPACITY OF SLIMDUCT RD】

〈Lineset capacities for plain unsecured linesets〉

The lineset capacities of SLIMDUCT RD differ according to the various configurations of linesets which may be used. These tables are calculated utilizing 75% of the duct cross section to allow for extra space that may be required for annealed copper linesets. When installing vertical linesets, make allowance for extra space required to accommodate bend radius.

〈Lineset capacities when secured to RD Duct with BIGTIE Banding System〉

Item No.Max. BHC Q'ty by Duct Size

BHC-1BHC-2BHC-3

150111

300332

300H3（6）3（6）2（4）

450544

450H5（10）4（ 8）4（ 8）

600765

600H7（14）6（12）5（10）

90010 8 8

900H10（20）8（16）8（16）

DuctSize

150

300

450

600

450H

300H

600H

900

900H

Insulation Thickness

Liquid Pipe×Gas Pipe（㎜）

Piping Size Liquid Pipe × Gas Pipe （mm）

10×1010×2010×1010×2010×1010×2010×1010×2010×1010×2010×1010×2010×1010×2010×1010×2010×1010×20

4285221012930181910402425186036

42842281182716179372124165432

2153116972013138281619144026

2153116961912137271618133824

2153116761811127241516123623

214210474171010622141483221

214210464151010620141483020

113294531498519121062818

113274531298418121062418

11327453128641510862416

9.52×15.88

9.52×19.05

12.7×25.4

12.7×28.58

15.88×28.58

15.88×31.75

19.05×31.75

19.05×38.10

22.22×38.10

22.22×41.28

■ For all SLIMDUCT RD series

■ For SLIMDUCT RD-ZA series

■ For SLIMDUCT RD ‒ WALKWAY Type

●Although ZAM, like hot dip galvanizing, is subject to white rust, this will actually form a protective coating and will not materially affect the corrosion resistance.

●Although the edges may show early traces of red rust as they are exposed to the elements, over a period of several months these will become coated with a zinc based film which leaches from the base layer and will change to a grayish black, providing a high level of corrosion protection for the edges.

●Always use safety protection gear （drop cloth, gloves & goggles） during installation.

●When cutting duct on site, always repair cut edges with a coat of Zinc Chromate paint （ZN-AL）.

■ Change in Appearance of ZA TypeThe surface of a high grade corrosion resistant hot dip galvanized steel sheet is formed of a precise coat of oxide which

protects the surface of the metal coating and comprises 2 layers as follows :1. A film of Zinc which contains Magnesium & Aluminum.

2. A second film of Zinc which contains Magnesium.

■ White Rust on ZA Type DuctThe coating layer on high grade corrosion resistant hot dip galvanized steel sheet contains Zinc which offers a higher degree of ionization, preventing white rust （Zinc Hydroxide） from eroding the base steel at cut edges and at any point where the surface has been damage by abrasion or scratching.It is important not to damage the surface protection coating during installation in order to maintain long term corrosion resistance.

■ Caution during Handling1） Do not damage the surface of the duct or fittings.

2） Do not store the duct or fittings directly on bare ground. When storing on ground, always use a spacer material other than wood to elevate the product.

3） Cover all material before and after installation with a protective cover to prevent any damage from any alkaline liquids or metal shavings from copper pipe cutting operations nearby.

■ Caution during StorageIf material is stored outside, protect from rain with a waterproof cover and remove this when rain stops. If material is to be shipped by ocean freight, do not permit material to become exposed to sea water during shipping, handling or storage at dockside.

●Refer to “SLIMDUCT RD Design & Installation” manual before use.●SLIMDUCT RD IS NOT WATERPROOF. To waterproof, use RDB DUCT BOTTOM PLATE, RSP WALL PLATE or RSB WALL SLEEVE and seal all penetrations with weatherproof sealant or putty.

●Do not walk on SLIMDUCT RD Walkway type on a regular basis as it was designed only as a walkway to facilitate periodic maintenance of outdoor AC equipment at irregular intervals.

●Attach brackets to RDWK duct only at cross strut, not at coupler. For Ells, REWK, RFWK

& RTWK, attach brackets to all standard and supplementary cross struts and anchor them to roof surface. For cross, RXW, attach 3 brackets to bottom plate.

●Do not use any components which are not coated with anti-slip tape material.

●Depending on the frequency of use, the anti-slip may wear away over a period of 5 to 8 years. Always replace the anti-slip tape whenever any of the edges become torn up or the surface shows signs of wear.

Values shown in these lists are for reference purposes only, and all figures shown are not guaranteed.

● Figures shown are not definitive, they are for reference purposes only.

●Quantities shown in parentheses（） reflect figures for use with RSK PARTITION PLATES. Actual figures for larger lineset sizes may differ from table due to complexity of installation.


Technical Data

【Material】

Surface TreatmentSalt ToleranceCoating VolumeTensile StrengthStretch

－Salt Resistant Specification190g/m2 at one sideMore than 274.6Nmm2（28f/mm2）More than 28％

【MAXIMUM LOAD CAPACITIES】

When brackets are fastened with 4 bolts tightened to the torque specification in column 1, column 2 shows the maximum allowable load before the RZM & RZB bracket/riser combination will shift and fail.

Torque Shift Starting Load（4 bolts）

29.4J（300kg-cm） 6,374N（650f）

2 Meter bracket spacing RZ BRACKET

SLIMDUCT RD Capacity （per 2M）

9,387N （958kgf）3,929N （401kgf）2,546N （260kgf）1,837N （187kgf）1,102N （112kgf）3,877N （396kgf）2,494N （255kgf）1,785N （182kgf）2,231N （228kgf）

1 Meter bracket spacing RZ BRACKET

Size

12,548N （1,280kgf）5,281N （ 539kgf）3,448N （ 352kgf）2,513N （ 256kgf）1,552N （ 158kgf）5,228N （ 533kgf）3,396N （ 347kgf）2,461N （ 251kgf）3,076N （ 314kgf）

RD-150RD-300RD-450RD-600RD-900RD-300HRD-450HRD-600HRD-900H

RD BRACKET

b. Maximum Load for Duct Covera. Maximum Load for Duct Base and Brackets

c. Maximum Load for Brackets

1010 1010

SLIMDUCT RD

STAND RZ

2020

SLIMDUCT RD

STAND RZ

Load

Duct CoverStandard Thickness（mm）

1.0

Bottom Bridge

1.4

Duct Base1.2

1.4

Duct Size

150300・450・600・900300H・450H・600H・900H

【Thickness of SLIMDUCT RD】

【CREATING AN OFFSET IN RD DUCT】

※ ZAM : A High Grade Corrosion Resistant Hot Dip Galvanized Coating composed of Zinc, 6% Aluminum and 3% Magnesium.

Base steel

Coating layer

Medium term exposure（a few weeks ～ several years）

Coating layer

Base steel

Zinc protective filmcontained Magnesium

Long term exposure

Its edge is covered with zinc-based magnesium contained protective film leaching from the coating layer at the plain parts in several months.

Coating layer

Base steel

Initial exposure（up to several weeks）

Cutting edge of base steel is oxidized by rain etc （Initial red rust）.

Color is gradually changed into gray and eventually grayish black.

Long Lasting Anti-Corrosion

Mechanism of Corrosion Resistance at Cut End of Duct

W

L

x H

L

x

x = 2 × W ー 239.7 L = W + 200

x = 2 × W ー 570 L = W + 530

x = 2 × W ー 632 L = W + 617

x = 2 × W ー 704.5 L = W + 664

x = 2 × W ー 685.9 L = W + 705.9

x = 2 × H ー 255L = H + 187

x = 2 × H ー 291.8L = H + 251

x = 2 × H ー 342.4L = H + 300

RF 45° FLAT ELL（top view）

RCF 45° VERTICAL ELL（side view）

Unit ： mm

150

300, 450, 600

300H, 450H600H, 900H

150

300, 300H

450, 450H

600, 600H

900, 900H

Size Formula Size Formula

＊ Size 900 & 900H require an extra 20mm to be added to duct length to allow for 　10mm insertion into elbow at each end.

＊

High Grade Corrosion Resistant Hot Dip Galvanized Steel Sheet ZAM（Coating layer of Zinc, 6% Aluminum, and 3% Magnesium）

Cover Loading

per 1ｍ2Stress level on200mm×100mmloading plate

Specification

Standard Type

Walkway Type

4,903N/m2 or less （500kgf/m2 or less）

49,030N/m2 or less（5,000kgf/m2 or less）

98N or less（10kgf or less）

980N or less（100kgf or less）

SLIMDUCT RD-ZA series is fabricated from the new “ZAM”※ material, a highly corrosion resistant hot dip galvanized steel which is equal to or exceeds the corrosion resistance properties of standard hot dip galvanized steel （HDZ55） or GALVALUM （AZ150）. This offers superior resistance over stainless steel （SUS 304） even in highly corrosive atmospheres such as sea air.Although the edges may show early traces of red rust as they are exposed to the elements, over a period of several months these will become coated with a zinc based film which leaches from the base layer and will change to a grayish black, providing a high level of corrosion protection for the edges.

Condition : Data is based on complete assembly of base and cover, and in case of size 450 & 600, additional reinforcement plate.

Zinc protective filmcontained Magnesium

（1） Protective film leaching from coating layer contained Ma at the plain parts

（2） Hydroxide of zinc （white rust）

Establish amount of offset required.Use tables below to calculate exact length of diagonal duct required to produce desired offset.Use RSS TELESCOPIC COUPLER or cut RD duct to suit.

41 42

Use

DRAIN HOSE・ACCESSORIES - OUTDOORDRAIN HOSE・ACCESSORIES - OUTDOOR

Unit ： mm

Dimensions

●Attractive, compact, quick fitting.● Weather resistant.● Ivory color matches DRAIN HOSE.● Appearance matches SLIMDUCT SD/NSD/MD.

● Material … PP　●Color … Ivory

Pcs/PkgCode No. Item No. Compliant drain hose A B C D E

8 φ4

17 B

A

C

E D

500500

0814208152

DS-14DS-16

DH-14・DHQ-14DH-16・DHQ-16

26.628.6

1820

39.341.3

23.325.3

1921

ç

ç

Pcs/PkgCode No. Item No. Length（L） Width（W） Height（H）

●Material … PVC　 Color … Gray　 Temperature range … －20℃～60℃

● Eliminates wet floors and prevents formation of dirt accumulations by leading condensate directly to drainage point.

● Gray color easily blends in with concrete flooring material.

● Easy to cut with snips or blade.

● Clips end of DRAIN HOSE into DRAIN CHANNEL without adhesives.

123411 DL-25 25m 55mm 5.5mmç

DL-H13 DL-H20

Pcs/PkgCode No. Item No. Compliant pipe A B H

Unit ： mm

Dimensions●Material … PVC　 Color … Gray　 Temperature range … －20℃～60℃

A B

H

100

100

23421

23431

DL-H13

DL-H20

DH-14/DHQ-14DH-16/DHQ-16VP-13VP-20

35

50

36

36

50

65

ç

ç

Unit ： mm

Dimensions

● Transparent body permits easy inspection.● Weather resistant plastic requires no protection.● Easy to clean.● Accepts DHQ 14 & DHQ 16 without adaptor.● This product does not produce a 100% seal. Under extremely high negative pressure conditions inside the building some outside air may be admitted.

● In an airtight home, pressure differential between indoors and outdoors may cause air backflow and result in noise. DHB Trap promotes condensate flow thus preventing noise and deters insects from entering DRAIN HOSE.

● Material … Acrylic resin● Color … Transparent

Unit ： mm

DimensionsL H

W

Pcs/PkgCode No. Item No. Compliant drain hose5008110 DHB-1416 DHQ-14・DHQ-16ç

Pcs/PkgCode No. Item No. Compliant drain hose50sets

（2 pcs/set）08050 DC-1416 DRAIN HOSE φ14・16ç

Unit ： mm

Dimensions

●Prevents insects from entering DRAIN HOSE.

● Clips easily onto O.D. of DRAIN HOSE.

● Fits both 14mm & 16mm hose.● Material … PP● Color … Ivory

Installation

Bellow

DRAIN HOSE

DRAIN CAP Socket

φ23 20

● Use only outdoors as insufficient sealing may lead to water leakage.● Although these are weather resistant products, extreme weather conditions may require protection inside trunking.

● Do not bend DRAIN HOSE with a radius of less than 80mm, overbending may cause stress breakage. During installation, check for sufficient slope and do not permit hose to sag in horizontal runs. For long horizontal pipe runs, PVC or NEO Drain Pipe is recommended.

● Use DRAIN HOSE accessories exclusively with INABA DENKO Drain Hose. Use of these products in combination with any other brand will invalidate warranty.

● Insert DRAIN HOSE fully into all accessory fittings and secure with tape. DO NOT TAPE NDH DRAIN HOSE ADAPTOR, instead glue it with PVC solvent type adhesive.

CAUTION FOR DRAIN HOSE & ACCESSORIES （OUTDOOR）

※ Requires adhesive to stick 　 permanently onto floor.※ Use in combination with DL-H 　 DRAIN CHANNEL ADAPTOR.

Use exclusively with INABA DENKO Drain Hose

37

2578

DRAIN HOSE SADDLEDS MINI INLINE TRAPDHB

DRAIN CAPDC

DRAIN CHANNELDL

DRAIN CHANNEL ADAPTORDL-H

※ Use tape to attach DHB to 　 DRAIN HOSE.

DRAIN HOSE

DRAIN PIPECOUPLER

NDHbody

DRAIN HOSE - Outdoor （DHQ）DRAIN HOSE - Outdoor （DHQ）DRAIN HOSE - Outdoor （DHQ）

DRAIN HOSE - Standard （DH）DRAIN HOSE - Standard （DH）DRAIN HOSE - Standard （DH）

Destruction

０ hrs ５００ hrs １０００ hrs ２０００ hrs

Accelerated Weather Resistance Test （Sunshine Weather Meter）

Unit : mm

Dimensions ●Connects cut lengths of drain hose.

● Material … PE● Color … Ivory

Pcs/PkgCode No. Item No. Compliant drain hose O.D. Length

● Joins 2 drain hoses. ● Material … PE● Integral air vent promotes drainage flow.

Pcs/PkgCode No. Item No. Compliant drain hose

28

100100

0886008870

DHJ-14DHJ-16


φ21.9φ24.4

2828

ç

ç

10008121 DY-1416 DH-14・DHQ-14DH-16・DHQ-16ç

Pcs/Pkg

86

Code No. Item No.

0803208012

DH-14DH-16

NominalSize

φ14φ16

Hose I.D.φ13.5φ16

Length50m50m

Hose O.D.φ18.3φ20.8

Max O.D.φ22φ22

ç

ç

Unit : mm

Dimensions

φ13.5

φ18.3

φ18.3

φ18

φ18

φ16

DH-14

（Socket O.D.）

（Socket O.D.）

DH-16

（Socket I.D.）

（Socket I.D.）

“Easy-feed” & portable package

●Protect from weather by taping or enclosing in trunking.

● Do not use bend radius of less than 80mm, overbending may cause stress breakage.

● During installation, check for sufficient slope and do not permit hose to sag in horizontal runs.

● Protect from weather by taping or enclosing in trunking.

● Material … PE● Color … Ivory● Cuff diameter accepts both14mm and 16mm sizes.

● Cuff spacing … 500mm

86

0828008260

DHQ-14DHQ-16

ç

ç

Features

Features

●Double the UV resistance of the DH series. Accelerated weather resistance test shows no damage after 2000 hours.

● Double layer construction increases durability.

● High quality PE （LLDPE） material gives excellent corrosion resistance.

● DHQ hose accepts all INABA DENKO drain hose fittings.

● Material … LLDPE● Cuff spacing … 500mm● Color … Ivory

NominalSize

φ14φ16

Hose I.D.φ13.5φ16

Length50m50m

Hose O.D.φ18.3φ20.8

Max O.D.φ22φ22


●NDH easily connects drain hose to NEO drain pipe coupler or VP/VE pipe coupler.

● Use for size 20A or 25A （with adaptor）.

● Material … PVC● Color … Ivory

● Use only with drain hose connection fittings.

Pcs/PkgCode No. Item No. Contents Compliant drain hose100100

8410084200

NDH-14SNDH-16S

NDH-14×1,NDA×1NDH-16×1,NDA×1


Compliant Neo Drain Pipe Coupler

For 20A

For 25A

Compliant PVC pipe coupler

For VP-20For VP-25 For VE-22

ç

ç

※※

※Requires NDA adaptor for 25A.　Use exclusively with INABA DENKO drain hose.

Adapterfor 25A（NDA）

Body（NDH）

Caution

Caution

Caution

Caution

Caution

● In cases of extreme environmental conditions, surface will require extra protection.

● Do not install with bend radius of less than 80mm, overbending may cause stress breakage.

● Over extended use period, black inner lining may surface but will not affect performance of hose.

● During installation, check for sufficient slope and do not permit hose to sag in horizontal runs.

Portable carton with removable EASY FEED flap

Double layere

d for outstanding durability

Double layere


Double layere


● Insert drain hose fully into socket and secure with tape.● Do not use on indoor or concealed applications.● Protect from weather by taping or enclosing in trunking.

① Fit in bellows of DH-16/DHQ-16② Fit in bellows of DH-14/DHQ-14③ Fit in female part of DH-14/16 　 and DHQ-14/16

Multiple uses of the size 14 & 16

Multiple uses of the size 14 & 16Multiple uses of the size 14 & 16



DRAIN HOSE - OutdoorDHQ

DRAIN HOSE COUPLERDHJ

VENTED DRAIN WYEDY DRAIN HOSE ADAPTORNDH

DRAIN HOSE ‒ StandardDH

UV resistant version!!UV resistant version!!UV resistant version!!UV resistant version!!UV resistant version!!

DRAIN HOSE & ACCESSORIES

Specification

Specification

Specification

SpecificationUse

Specification

Features

Specification

Features

Specification

Features

Caution

Use

Specification

Features

Specification

Features

Specification

Features

43 44

● Length adjusts between 100 & 180mm without cutting.

● Wide flange allows for installation up to 5° slope.

● All 3 sizes accept standard NWM HOLE COVER.

WALL SLEEVEWALL SLEEVE

Unit ： mm

Dimensions

Unit ： mm

Dimensions ●Cutmarks embossed at 1cm intervals on sleeve surface facilitate cutting to correct length.


Pcs/PkgCode No. Item No. Applicable

WALL CAPA

（I.D.）B

（O.D.）Core drill diameter

Typical installation in combination with WC WALL FLANGE

φB

φA

11010

200

t＝1.5mm

100100100

038600387003880

FP-60NFP-65NFP-75N

WC-60N,UWC-60WC-65N,UWC-65WC-75N

61.566.575.5

63.568.578.5

657080

I.D. incombinationwith WC576271

I.D. incombinationwith UWC5863－

ç

ç

ç

Unit ： mm

Dimensions

● Integral 5º slope ensures correct pitch for drain line.

● Sleeve is easily secured tightly onto wall by tightening locknut.


Pcs/PkgCode No. Item No. A I.D. Core drill diameter505010

039100392003930

FPS-60FPS-65FPS-85

94.599.5130.0

58.563.584.5

φ65φ70φ95

Effective length（max）180㎜180㎜180㎜

F171723

ç

ç

ç

●Cutmarks embossed at 1cm intervals on sleeve surface facilitate cutting to correct length.

● Integral flange prevents loss inside wall cavity.

● Can be used with WC & UC WALL FLANGE.

● Material … PE+PP● Color … Ivory （Silky White）

Pcs/PkgCode No. Item No. A（I.D.） B（O.D.） Core drill diameter10050

0395003960

FPW-60FPW-65

61.566.5

63.568.5

D83.588.5

C180200

E7076

6570

ç

ç

A

5200（Effective 180）

14

F

● Joint, fixing and penetration points must be weatherproofed with caulk or putty.

● When drilling hole in wall, take into account wall thickness as well as slope to ensure that 5º pitch is maintained.

E

D

Ct＝1mm

φBφA

Unit ： mm

Dimensions

●Unitary construction is easy to caulk and prevents water and pest damage.


Pcs/PkgCode No. Item No. A（O.D.） B（I.D.） C10010050

036600367003680

NFP-60NFP-65NFP-75

61.566.576.5

50.555.565.5

8590100

A+BA+CA+B+CA+B+B+CA+B+B+B+C

99～105㎜

127～180㎜196～255㎜265～330㎜

1 sets

1 sets2 sets3 sets

Core drill diameter657080

ç

ç

ç

φBφA

Ref. Combination dimensions30

φC


● Can not be adjusted for lengths between 105 & 127 mm.

■ NFP Description of Part Names

■ Combination Dimensions

※Minimum 24mm overlap required for each component when assembling.※To attach NWC WALL FLANGE to part B or C, adjust sleeve to exact 　thickness of wall.※To replace part A with NWC WALL FLANGE, reduce sleeve length to 　10mm less than wall thickness.

Pcs/PkgCode No. Item No. Contents303030

038100382003830

NFP-60SNFP-65SNFP-75S

NFP-60＋（NWC-60＋NWM-C）×２NFP-65＋（NWC-65＋NWM-C）×２NFP-75＋（NWC-75＋NWM-C）×２

ç

ç

ç

66.5mm I.D. accommodates 66.5mm I.D. accommodates air intake hoseair intake hose66.5mm I.D. accommodates 66.5mm I.D. accommodates air intake hoseair intake hose66.5mm I.D. accommodates air intake hose

FLANGED WALL SLEEVEFPWPLAIN WALL SLEEVEFP

FLANGED WALL SLEEVEFPS NEW WALL SLEEVENFP

NEW WALL SLEEVE KITNFP-S

Parts Combination

A（Flange） B（Body） C（End）

Adjustable Length NFP Required Q'ty

DRAIN HOSE・ACCESSORIES - INDOORDRAIN HOSE・ACCESSORIES - INDOOR

Soft but strong enough to do the job !Soft but strong enough to do the job !

Prevents sweating under extreme conditions of 15℃ condensate temperature, 30℃ ambient temperature and 70% RH.

Insulated to Prevent Sweating

Internal PE hose cuts easily with blade or snips.Easy to Work With

Reduces resistance and maximizes condensate flow.Smooth Bore Interior

Independent layers plus spiral insulation layer make bending easy and facilitate installation in tight spaces.

Soft and Pliable

Dew Condensation Prevention Soft Type

Data shows superior performance in sweat prevention

DSH-25NPipe internal temperature 15℃Pipe internal temperature 10℃

100

90

80

70

600 10 20 30

DSH-20N

100

90

80

70

600 10 20 30

Pipe internal temperature 15℃Pipe internal temperature 10℃

DSH-14

100

90

80

70

600 10 20 30

Pipe internal temperature 15℃Pipe internal temperature 10℃

Example of Typical Installation

Pcs/PkgCode No. Item No. Hose I.D. Hose O.D. Length

●Soft and pliable for easy installation.●Easily cut to length.

● Complete kit provides best value.

Pcs/PkgCode No. Item No. Contents

411

083100896008970

DSH-14DSH-20NDSH-25N

φ14.5φ19.0φ25.0

φ26.5φ31.0φ37.0

20m20m20m

Insulation thickness6mm6mm6mm

ç

ç

ç

408350 DSH-14Sç

DSH-14

DSH-14S

● Room A/C Installation - Size 14

DRAIN HOSE - OUTDOOR（DH-14・16）

INSULATED DRAIN HOSE （DSH-14）

A/C attached drain hose

Hose to A/CAttached Hose COUPLER（DSH-14C）

Hose to Hose Socket COUPLER（DSH-14H）

INSULATED DRAIN HOSE KIT （Soft Type）DSH-S

Accessories for INSULATED DRAIN HOSE

INSULATED DRAIN HOSE （Soft Type）DSH

Hose to PipeADAPTORφ14

Hose to PipeFitting ADAPTOR

φ20・25

Hose to A/C AttachedHose COUPLER

φ14

Hose to PipeADAPTORφ20・25

Hose to Hose SocketCOUPLERφ14

Hose to HoseCOUPLERφ14・20･25

INSULATED DRAIN HOSEPrevents Sweating

Pliable and easy to work




Ambient temperature （℃） Ambient temperature （℃） Ambient temperature （℃）

INSULATED DRAIN HOSE 20mHose to A/C Attached Hose COUPLERHose to Hose Socket COUPLER

DSH-14 ×1DSH-14C ×15DSH-14H ×15

Specification

Features

Features

Features

Specification

Features

Specification

Features

Specification

Features

CautionCaution

45 46

● Thinner than the older HF series, improved flexibility allows ease of application.

Pcs/Pkg300300808080

Code No. Item No.130101302007110712007132

HF-0191-BHF-0191-NIHF-50HF-50-NIHF-50-PM（PM TAPE）

Size（Ｗ×L）19mm×10m19mm×10m50mm×20m50mm×20m50mm×20m

Thickness

0.2mm

ColorBrownNew Ivory

Gray, White, Brown, Black, IvoryNew Ivory

Similar color to PMH, PMH-S, NDD

ç

ç

ç

ç

ç

Pcs/Pkg80200


HV-50-IHV-25-I

Size（Ｗ×L）50mm×20m25mm×20m

Thickness0.18mm0.18mm

ColorIvoryIvory

ç

ç

Ref Tape color details

●Specially formulated non adhesive tape will not unroll by itself even if dropped during application, see picture on left.

Will not Will not unroll unroll by itselfby itself

Will not unroll by itself


070520706007332

HY-50-IHY-50-NIHY-75-I

Thickness0.12mm0.12mm0.12mm

ColorIvory

New IvoryIvory

ç

ç

ç

Size（Ｗ×L）50mm×18m50mm×18m75mm×18m

Pcs/PkgCode No. Item No. Size（Ｗ×L） Color12012080

0721072200731

HN-50HN-50-NIHN-75

50mm×18m50mm×18m75mm×18m

Gray, White, Brown, Black, IvoryNew Ivory

Gray, White, Black, Ivory

ç

ç

ç

Thickness0.15mm0.15mm0.15mm

＊Stock only

＊

※… Use HF-0191 for Brown and New Ivory with 19mm width.

Pcs/Pkg

200

200

Code No. Item No.

10000～140

20010～130

VT-19×10

VT-19×20

Size（Ｗ×L）

19mm×10m

19mm×20m

Color

Gray, Black, White, Yellow, Red, Blue, Ivory※

Thickness

0.2mmç

ç

ADHESIVE TAPE ＜Standard Thickness＞HF

ADHESIVE TAPE ＜ Reduced Thickness ＞HV

NON ADHESIVE TAPEHN

VINYL TAPEVT

NEOPITA TAPEHY New Non-Adhesive Tape

TAPETAPE

●Material … PVC

●Material … PVC

●Material … PVC

●Material … PVC

●Material … PVC

● Ivory Color Tapes HY, HF, HV are all similar in color to Ivory SD, NSD & LD lineset trunking.● New Ivory Color Tapes HY, HN, HF, HV are all similar in color to insulation surface on PAIRCOIL or NEOCOIL insulated copper tube.

Clamp fin

Pcs/PkgCode No. Item No. A B（O.D.） C（I.D.）200200100

034600347003480

NWC-60NWC-65NWC-75

112117127

63.568.578.5

55.560.570.5

ç

ç

ç

Unit ： mm

Dimensions

Unit ： mm

Dimensions

●Material … PP　●Color … Ivory

Pcs/PkgCode No. Item No.20003520 NWM-Cç

●Use exclusively with NWC WALL FLANGE.● Joint, fixing and penetration points must be weatherproofed with caulk or putty.

● Material … ABS　●Color … Ivory● Use exclusively in combination with NFP NEW WALL SLEEVE.● Joint, fixing and penetration points must be weatherproofed with caulk or putty.

6

φA

φC

φB

308

φ82

φ87

10

5050

50

0313203142

03152

AC- 67AC- 75

AC-100

VP-65（67×76）SU-75（75×80）SU-100（100×106）VP-100（100×114）

66.574.5

99.0

89108

130

58.567.0

91.0

ç

ç

ç

Unit ： mm

Dimensions

●Split construction ensures ease of installation.● Use in combination with FP-60N, FP-65N, FP-75N.● Locking tab snaps off to provide holes for extra mounting screws.● Scored line facilitates trimming of flange to fit into tight spaces.● Material … PP　●Color … Ivory


Unit ： mm

Dimensions

200200200

033520336203372

WC-60NWC-65NWC-75N

112117127

9698105

C（I.D.）576271

D（O.D.）61.566.575.5

ç

ç

ç

●Cap is easily held in position by pulling on band.

● Clamp fin easily allows temporary positioning.

● Material … PP● Color … Ivory● Caulk around outside cover to weatherproof cap.




Pcs/Pkg50

Code No. Item No.03532 AF-610

ColorIvory （Silky White）

Applicable hole diameterφ60～φ100

Applicable wall thickness50～250㎜ç

25 3

φ110

Fix with band from the other sideTemporary fixing

BAD

C 6

Knockout for mounting screw

Unit ： mm

Dimensions

● Use in combination with WC-60N, WC-65N or WC-75N.● Material … EVA　●Color … Ivory

Pcs/PkgCode No. Item No. A100100100

035520356203572

WM-60WM-65WM-75

707686

ç

ç

ç

20

A

6

Unit ： mm

Dimensions

●Material … ABS● Color … Ivory （Silky White）

Pcs/PkgCode No. Item No. Applicable pipe（I.D.×O.D.） A B C

Unit ： mm

Dimensions

●Apply for WALL SLEEVE FP series.● Material … PE● Color … Ivory （Silky White）


0326203272

UWC-60UWC-65

A8590

B7076

C（O.D.）61.566.5

D（I.D.）5863

ç

ç

505

AB C

A C D

17B

WALL CAPWCWALL FLANGE for NFP NEW WALL SLEEVENWC

NWC HOLE COVERNWM WC HOLE COVERWM

A/C CAPAC WALL CAP ‒ Thin TypeUWC

HOLE CAPAF Wall Sleeve Closure Plate covers 60 ～ 100mm diameter

WALL CAPWALL CAP

SpecificationCaution

Caution

Caution

Caution

CautionSpecification

Features

Features

SpecificationSpecification

Specification SpecificationFeatures

Caution

Features

Specification

Specification

Specification

Features

Features

Specification

Specification

Specification

47 48

PIONEERS OF THE ORIGINAL CONDENSER RISER !!

PLAROCKPLAROCK

W3/8 Hex bolt L22mm, anti corrosion finishW3/8 Hex bolt, anti corrosion finishWasher, anti corrosion finish

2 pcs2 pcs2 pcs

150・350 Series Bolt Set

■ Attachment with 　 anchor bolts

■ Attachment with 　 PLAROCK RETAINER 　 CLAMP PR-P

W3/8 Hex bolt L32mm hot-dip galvanized （HDZ）W3/8 Hex bolt hot-dip galvanized （HDZ）Washer hot-dip galvanized （HDZ）

2 pcs2 pcs2 pcs

400・450 Series （P type） Bolt Set

Raised Area Putty Volume（estimation）

450mm or less

Over 450mm

500g

1kg

Whole surface

450 450

Putty

PLAROCK END COVERPRCFeatures ●Clip on cover seals and beautifies open

ends of PLAROCK.● Can be permanently attached with adhesive if required.

● Integral ventilation slots improve thermal resistance.

● Material … PVCCaution ●Use of adhesive is recommended to

ensure permanent attachment.

Pcs/PkgCode No. Item No. Color Applicable PLAROCK50sets50sets

1445014460

PRC-350NPRC-351N

BlackIvory

350N seriesç

ç

＊ 2pcs/set

●Material （Surface treatment）… SS41　　　　　　　　　　（Hot-dip galvanized）

● Color … Gray


PR-P1PR-P2

Compliant size400・450 series150・350 series

L12080

W10060

Thickness2.32.0

ç

ç

※ 2 pieces per set, 　 1 set required per length of PLAROCK.

● 2 pcs/set

● Fixing hole diameter（φ10.5 mm）

PLAROCK RETAINER CLAMPPR-P

※…Some products are supplied without bolts.

※

※

■ If anchor bolts or PR-P RETAINER CLAMPS 　 cannot be used to secure PLAROCK to floor　 surface, use PLASEAL EP-178 Epoxy Putty.

Place putty evenly

Bottom plate

PLAROCK Length（mm）

PLAROCKPR Condenser Riser

Unit ： mm

Dimensions

Caution

Code No. Series Item No. Color Allowable load（N[kgf]）

DimensionL×W1×W2×H(mm)

Attached bolt Pcs/Pkg

３５０

４００

４５０

143401426014310142701432014280143301436014410143901411014100

PR-151PR-350NPR-351NPR-350N-MPR-351N-MPR-350N-LPR-351N-LPR-400PR-401PR-400LPR-450PPR-1800P

IvoryBlackIvoryBlackIvoryBlackIvoryBlackIvoryBlackBlackBlack

20202020204466161

1,372［ 140］1,372［ 140］1,372［ 140］1,765［ 180］1,765［ 180］3,922［ 400］3,922［ 400］3,922［ 400］3,922［ 400］15,691［1,600］4,413［ 450］17,652［1,800］

360× 86× 80× 40360×100× 80× 95360×100× 80× 95450×100× 80× 95450×100× 80× 951,000×100× 80× 951,000×100× 80× 95450×150×110×120450×150×110×1201,800×150×110×120450×205×137×1541,800×205×137×154

DacrotizedDacrotizedDacrotizedDacrotizedDacrotizedN/AN/AHDZHDZN/AHDZN/A

●Material … PVC

PR-350N

350150 400 450

PR-351N

H

W1

W2

L

Light & Strong ! PVC Condenser Riser

PR-400PR-401

PR400 SeriesPR350 Series

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

ç

●Use only within a temperature range of －10º to 50℃

PLAROCK

１５０

Features

PR-350N-L PR-350N-M PR-351N PR-350N PR-151

● Lightweight, excellent weather resistance, high load capacity.

● Integral top channel allows easy adjustment of bolts to suit condenser fixing points and permanently attaches condenser to eliminate sliding due to vibration.

● Specially designed open structure permits PLAROCK to withstand outdoor temperatures as high as 50℃.

● Full range of 8 sizes fits condensers from any manufacturer.

Specification

Specification

Specification

49 50

CATCHER － Universal Condenser BracketsCATCHER － Universal Condenser Brackets

WALL BRACKET ‒ Separated Type

Code No.Item No.

Use

C-BZFG

Specification / Material

6Min. lot

Hot DipGalvanized

A/Capplicable size

WD

　 Free100～330

For Wallç 18548 Code No.

Item No.

Use

C-BZFG-L


6Min. lot

Hot DipGalvanized

A/Capplicable size

WD

　 Free140～440

For Wallç 18549Code No.

Item No.

Use

C-BFG-L


6Min. lot

Powder Coating

A/Capplicable size

WD

　 Free140～440

For Wallç 18544

SLOPED ROOF BRACKET

Code No.Item No.

Use

C-YG

4Min. lot

A/Capplicable size

WD

300～700180～330

For Sloped Roof

Specification / Material ZAM+Powder Coating

ç 18502 Code No.Item No.

Use

C-YUG

4Min. lot

A/Capplicable size

WD

100～700160～340

For Sloped Roof



Use

C-YUG-L

4Min. lot

A/Capplicable size

WD

100～700160～400

For Sloped Roof



Use

C-YUZG-L

4Min. lot

A/Capplicable size

WD

100～700160～400

For Sloped Roof

Specification / Material Hot Dip Galvanized

ç 18541

Pitch of roof 14°～30°2.5／10～5.8／10

WALL BRACKET

Code No.Item No.

Use

C-KG


4Min. lot

ZAM+Powder Coating

A/Capplicable size

WD

70～940160～340


Item No.

Use

C-KG-L


4Min. lot

ZAM+Powder Coating

A/Capplicable size

WD

70～940160～400


Item No.

Use

C-KZG-L


4Min. lot

Hot DipGalvanized

A/Capplicable size

WD

70～940160～400

For Wallç 18537

Pitch of roof 14°～30°2.5／10～5.8／10

Capacity Capacity

Capacity Capacity Capacity

Capacity Capacity Capacity Capacity

Capacity

Wall anchorage dimensionsFree



Wall anchorage dimensions

（Caution）Coach bolts are not included.



Hang vertical bar from the front.




Meter module


Meter module

Pitch of roofPitch of roof

Mild slopeLevel

Adjustable

Frame

Frame

Can be adjusted for mild slope （0°～17°） by assembling the frame upside down.

（AT level）

H

W1 L

W2

H

W1 L

W2

H

W1

L

W2

23

35

21

5

DiagonalDiagonalDiagonal

ImageImageImage※3

Features ●Absorbs vibration and acts as a buffer to reduce noise transmission.

● Surface embossed cut lines at 50mm intervals facilitate cutting to size.

● Unique design opposes grids and ensures that vibration absorption is not compromised even under heavy loads.

● GP can easily be stacked in layers to improve vibration absorption.

● Materials … NRCaution ●Do not apply this product directly to any PVC floor material as

plasticizer ingredient may cause discoloration.

Features ●Absorbs vibration and acts as a buffer to reduce noise transmission.● Materials … Chloroprene rubber offers superior weather and thermal resistance.

Unit ： mm

Dimensions

Unit ： mm

Dimensions

Pcs/Pkg20

Code No. Item No.06800 GP-100-10

Width（W）100

Length（L）1000

Thickness（t）10

Pcs/Pkg24012060

Code No. Item No.069800699007000

GPS-50-50GPS-80-80GPS-100-100

Width（W）5080100

Length（L）5080100

Thickness（t）

10

Hole diameter（㎜）

φ13

LW

t

Pile up this with the same item No.

LWt

Unit ： mm

Dimensions● Absorbs vibration and acts as a buffer to reduce noise transmission.● Grids on top and bottom of GPC are opposed at 90°.● Surface embossed 25mm × 25mm grid facilitates cutting to size and squaring.

● GPC can easily be aligned and stacked in layers to improve vibration absorption.

Features

●Materials … NR+SBRCaution ●Do not apply this product directly to any PVC floor material

as plasticizer ingredient may cause discoloration.Pcs/Pkg2020102010

Width（W）100100150300100

Length（L）1000120010003001000

Thickness（t）1010101015

Code No. Item No.0688006250062200623006240

GPC-100-10GPC-100-12GPC-150-10GPC-300-03GPC-100T15-10

ç

ç

ç

ç

ç

ç

ç

ç

ç

LW t

GPC ANTI-VIBRATION PADGPC

GP ANTI-VIBRATION PADGP

GPS ANTI-VIBRATION PADGPS

10

17.7 5

12

9

20

35

15

11

StraightStraightStraight

Unit ： mm

Unit ： mm

Unit ： mm

With non-skid rubber sheet

With non-skid rubber sheet

※3 … Metal rail is not attached.

※3 … Metal rail is not attached.

●Material … Exterior : Recycled resin （PP, PE） / Interior : Eco-concrete / Rubber sheet : Recycled rubber● Temperature range … －10℃～50℃　　●Color … Black

CR-W RECYCROCK ‒ 3/8 Rail TypePcs/PkgCode No. Item No. Dimension L×W1×W2×H (mm)8222

14800148011480214803

CR-W1015CR-W1040CR-W1050CR-W1060

150×120×110×100400×120×110×100500×120×110×100600×120×110×100

Weight2.3kg5.0kg5.4kg5.8kg

Rubber sheet○×××

Allowable face load (N[kgf]) 　7,840［800］7,840［800］7,840［800］7,840［800］

ç

ç

ç

ç

※4 … Allowable face load is calculated on equal loading over 100% of surface area.

※4

CR-BZ BOLT SET for 3/8 Rail TypePcs/PkgCode No. Item No. Contents10sets14190 CR-BZ W3/8 Hex bolt （L45 HDZ） × 2 pcs, W3/8 Hex bolt （HDZ） ×2 pcs, W3/8 Washer （HDZ） × 2 pcsç

CR-H RECYCROCK ‒ Hanger Rail TypePcs/PkgCode No. Item No. Dimension L×W1×W2×H (mm)12 6 8 4

14790147911479514796

CR-H0715CR-H0730CR-H1015CR-H1030

150×120×110× 70300×120×110× 70150×120×110×100300×120×110×100

Weight1.4kg2.8kg2.3kg4.6kg

ç

ç

ç

ç

CR-D RECYCROCK ‒ D TypePcs/PkgCode No. Item No. Dimension L×W1×W2×H (mm)12 6 8 4 2 2

147801478114785147861478714788

CR-D0715CR-D0730CR-D1015CR-D1030CR-D1045CR-D1060

150×120×110× 70300×120×110× 70150×120×110×100300×120×110×100450×120×110×100300×120×110×100

Weight1.4kg2.8kg2.3kg4.6kg5.2kg5.8kg

ç

ç

ç

ç

ç

ç

D Type

Hunger Rail Type

3/8 Rail Type

Rubber sheet○○○○

Rubber sheet○○○○○○

RECYCROCKCR

3/8 Rail Type3/8 Rail Type3/8 Rail Type3/8 Rail Type3/8 Rail TypeCR-W

Portable shapewith handleVersatile

mounting block

Versatile mounting

block

for pipes, cables o

r condensers

for pipes, cables or

condensersVersatile

mounting block

Versatile mounting

block

for pipes, cables o

r condensers

for pipes, cables or

condensers

Versatile mounting

block

for pipes, cables o

r condensers

Eco-friendlyEco-friendly ‒ uses recycled materials ‒ uses recycled materialsEco-friendlyEco-friendly ‒ uses recycled materials ‒ uses recycled materialsEco-friendlyEco-friendly ‒ uses recycled materials ‒ uses recycled materials

Multiple use Support System

ImageImageImage※3

Eco-friendly ‒ uses recycled materials

RECYCROCK・ANTI-VIBRATION PADRECYCROCK・ANTI-VIBRATION PAD

Manufactured by NISSEI METAL Co., Ltd.

Specification

Specification

Specification

Specification

51 52

MemoMemo

4405

405

450

CATCHER － Universal Condenser BracketsCATCHER － Universal Condenser Brackets

Code No.Item No.

Use

C-WG-L

2Min. lot

A/Capplicable size

WD

400～800200～380

For Two-Stage Flats


ç 18527Code No.Item No.

Use

C-WG

2Min. lot

A/Capplicable size

WD

300～700160～340

For Two-Stage Flats



Use

C-DG3

6Min. lot

A/Capplicable size

WDH

400～700160～340630（Max. effective length）

For Suspension


ç 18569

Code No.Item No.

Use

C-NG5-L

2Min. lot

A/Capplicable size

WD

400～800200～380

For Flats



Use

C-NG

3Min. lot

A/Capplicable size

WD

300～700160～340

For Flats


ç 18516

Code No.Item No.

Use

PC-YG60

1Min. lot

A/Capplicable size

WD

400～1,000300～ 430

For Sloped Roof

Specification / Material Hot Dip GalvanizedHot Dip Galvanized Hot Dip Galvanized Hot Dip Galvanized

ç 25002

DUPLEX STANDUNDERSLAB BRACKET

SLOPED ROOF BRACKETWALL BRACKET SLAB STAND

SLAB STAND

Code No.Item No.

Use

C-NG5

3Min. lot

A/Capplicable size

WD

300～700160～340

For Flats



Use

C-NG-L

2Min. lot

A/Capplicable size

WD

400～800200～380

For Flats


ç 18518

Code No.Item No.

Use

PC-KG60

1Min. lot

A/Capplicable size

WD

500～1,000300～ 430

For Wall



Use

PC-BG60

1Min. lot

A/Capplicable size

WD

400～1,000300～ 430

For Wall



Use

PC-NG63

1Min. lot

A/Capplicable size

WD

400～1,010300～ 430

For Flats


ç 25014

600～662

199～365

300mmHeight

Code No.Item No.

Use

C-DZG-L

2Min. lot

A/Capplicable size

WDH

300～700160～380770（Max. effective length）

For Suspension

Specification / Material Hot Dip Galvanized

ç 18515

Capacity Capacity Capacity Capacity

Capacity Capacity

CapacityCapacity Capacity Capacity

Wall anchorage dimensions Wall anchorage dimensions

Wall anchorage dimensions 485 Floor anchorage dimensions

355

Floor anchorage dimensions858（Base outward）775（Base inward）


355



Floor anchoragedimensions

858（Base outward）775（Base inward）

Floor anchoragedimensions

958（Base outward）875（Base inward）

Ceiling anchorage dimensionsCeiling anchorage dimensions

0° ～12°（Level ～ 2.1／10）

0° ～28°（Level ～ 5.2／10）Applicable

pitch 0° ～13°（　　～ 2.3／10）

Applicablepitch

Level

Level 0° ～11°（Level ～ 1.9／10）

Applicablepitch

LevelApplicable

pitchLevel

Level

H300mm Frame clips together for easy assembly




Do not use above 15th floor

Do not use above 15th floor

（454）

677

Ceiling anchorage dim

ensions Ceiling anchorage dimensions

Ceiling anchorage dim

ensionsCeiling anchorage dimensions

Effective A/C dimensions on 1st step（Width）（Depth）（Height）734 314 735Frame clips together for easy assembly

Effective A/C dimensions on 1st step（Width）（Depth）（Height）834 354 735Frame clips together for easy assembly

Capacityunits

Capacityunits

Pitch adjustment

Rectangular setting

Pitch adjustment

Rectangular setting

Level

Level

Level

Level

Pitch of roof

Anti vibration base available Anti vibration base available Anti vibration base available

294

With protection cover

Remarks

●Quality, technical information, & packing details in the catalogue are subject to change without notice.●Unless otherwise specified, all products in this catalog are according to JIS standards or our own manufacturing standards.●These products are warranted against any defects in workmanship and material. The sole liability of Inaba Denki Sangyo under this warranty is limited to the repair or replacement of defective products, at the sole discretion of Inaba Denki Sangyo.

● Inaba Denki Sangyo shall not be responsible for the failures of the products due to mis-handling, mis-application, any failures during storage nor transportation. Inaba Denki Sangyo shall not be liable for any loss or damage either direct or consequential arising out of any defects or application of the products.

●All products returned by the customer to Inaba Denki Sangyo for warranty, or warranty repair shall be free of all charges to Inaba Denki Sangyo and at the customer's risk.

Manufactured by NISSEI METAL Co., Ltd.

Ceiling anchor and bolt are not included.

Ceiling anchor and bolt are not included.

53 54

Date post:	24-Jan-2017
Category:	Documents
Upload:	duongkien
View:	268 times
Download:	9 times

Insulated Copper Tube / Pipe

Documents