INSULATION · 2013. 8. 26. · insolation boards on the most modern production line all over...

INSULATIONwww.schneider-holz.com

Wood fiber insulation boardsAccessoriesApplication guide

PRICE LISTValid from January 2013

Photo forest: © shutterstock2

YOUR CONTACT PERSONS

Sales

Benjamin SchöllhornLogisticsPhone +49 (0)7355 9320-233Fax +49 (0)7355 9320-300E-Mail [email protected]

Mary KarnikSalesPhone +49 (0)7355 9320-240Fax +49 (0)7355 9320-300E-Mail [email protected]

Caroline RundelSalesPhone +49 (0)7355 9320-245Fax +49 (0)7355 9320-300E-Mail [email protected]

Logistics

Bianca Reuter-FischerSalesPhone +49 (0)7355 9320-251Fax +49 (0)7355 9320-300E-Mail [email protected]

Michael StecherLogisticsPhone +49 (0)7355 9320-232Fax +49 (0)7355 9320-300E-Mail [email protected]

3

best wood SCHNEIDER

We are a medium-sized company with customers all over Europe located in the south of Germany. Our branch office is located in Switzerland. With 300 employees, we produce all statically loaded wooden products for modern wood and passive houses.

Since the beginning of 2011 we produce flexible and rigid wood fiber insolation boards on the most modern production line all over Europe.

KVH PRODUCTION LINE II

GLUE UNIT I

ADMINISTRATION

BIOMASS POWER PLANT

REFINER WOOD FIBER

PRODUCTION OFWOOD FIBER INSULATION

GLUE UNIT II

KVH PRODUCTION LINE I

SAWMILL

LOADING STATION

WOOD DRYING

4

GLULAMSKANDINAVIAN SPRUCE LOCAL SPRUCE LARCH

DUO-/TRIO-BEAMSSKANDINAVIAN SPRUCE

DUO-/TRIO-BEAMS WALLBOARDLOCAL SPRUCE

RIPPED GLUED BEAMSLOCAL SPRUCE

PRODUCTS FOR MODERN TIMBER CONSTRUCTION.

KVH® SOLID STRUCTURAL TIMBERWITH FINGER JOINTSWITHOUT FINGER JOINTS

KVH® SOLID STRUCTURAL TIMBER - DOUGLASWITH FINGER JOINTS

BS-CEILING BEAMS GLUEDSKANDINAVIAN SPRUCE LOCAL SPRUCE LARCH

BS-CEILING BEAMS GLUED - RIPPEDSKANDINAVIAN SPRUCE LOCAL SPRUCE LARCH

BS-CEILING BEAMS GLUED - ACOUSTICSKANDINAVIAN SPRUCE LOCAL SPRUCE LARCH

BS-CEILING BOARDSKANDINAVIAN SPRUCE LOCAL SPRUCE

BEAMS FOR LOG HOUSES GLUEDSKANDINAVIAN SPRUCE LOCAL SPRUCE

BEAMS FOR LOG HOUSES MASSIVELOCAL SPRUCE

DIRECTLY FROM THE MANUFACTURER!

5

MULTITHERM 110INSULATION BOARD –

UNIVERSAL APPLICATION

MULTITHERM 140INSULATION BOARD –

UNIVERSAL APPLICATION

TOP / MULTITHERM 180 DINSULATION FOR THE FLOOR

FLOOR 140INSULATION FOR THE FLOOR FLOOR 140

INSULATION FOR THE FLOOR

LOAM RENDERING BOARDINTERIOR BASE BOARD

ROOM 150RENDER BASEBOARD

FOR INTERIOR APPLICATION

TOP / MULTITHERM 180 DFRONTAGE INSULATION

WALL 140RENDER BASEBOARD

wood fiber insulation board by best woodOVERVIEW

6

MULTITHERM 110INSULATION BOARD – UNIVERSAL APPLICATION

Page 8


Page 10


Page 16

WALL 180RENDER BASEBOARD FOR TIMBER FRAMED CONSTRUCTIONS

Page 18

MULTITHERM 180 DINSULATION BOARD WITH HIGHER PROTECTION AGAINST FIRE Page 21

FLOOR 140INSULATION BOARD FOR THE FLOOR

Page 20

ROOM 150RENDER BASEBOARD FOR INTERIOR APPLICATION

Page 20

LOAM RENDERING BOARDINTERIOR BASE BOARD PRE-RENDERED WITH LOAM

Page 21

FLEX 50FLEXIBLE INSULATION BOARD

Page 6

TOP 220 / 180 / 160 / 140WEATHERPROOF INSULATION

BOARD UNDER ROOF

FLOOR 140INSULATION FOR THE FLOOR



WALL 180RENDER BASEBOARD FOR TIMBER FRAMED

CONSTRUCTIONS

ROOM 150RENDER BASEBOARD

FOR INTERIOR APPLICATION

TOP 220 / TOP 180WEATHERPROOF INSULATION BOARD UNDER ROOF

Page 12

TOP 160 / TOP 140WEATHERPROOF INSULATION BOARD UNDER ROOF

Page 14

OVE

RVIE

WW

OO

D FI

BER

INSU

LATI

ON

BO

ARDS

INSU

LATI

ON

BO

ARD

S

7


Cover size(m² Board)

stump 565 x 1200 mm (0.68 m²)

Thickness in mm

Price per demand m² per pallet

Units per pallet

m² per pallet

Units per pallet

m² per pallet

Units per pallet

40 • 70.51 104 105.77 156 141.02 208

50 • 54.24 80 81.36 120 108.48 160

60 • 48.82 72 73.22 108 97.63 144

80 • 37.97 56 56.85 84 75.94 112

100 • 27.12 40 40.68 60 54.24 80

120 • 27.12 40 40.68 60 54.24 80

140 • 21.70 32 32.54 48 43.39 64

160 • 20.34 30 30.51 45 40.68 60

180 • 16.27 24 24.41 36 32.54 48

200 • 16.27 24 24.41 36 32.54 48

220 • 13.56 20 20.34 30 27.12 40

240 • 13.56 20 20.34 30 27.12 40

Cover size stump500–800 mm width x 1200 mm

Thickness in mm

Price per demand

80 •

100 •

120 •

140 •

160 •

180 •

200 •

220 •

240 •

Standard sizes

Special sizes width of 500 – 800 mm

Minimum purchase FLEX 50 „small pallet“

Available sizes and prices

Small pallet

Medium pallet

Large pallet

L 120 cm - W 120 cm - H 240 cm L 180 cm - W 120 cm - H 240 cm L 240 cm - W 120 cm - H 240 cm

The invoicing corresponds to the distance between rafters. Your ordered size corresponds to the distance between the rafters and we add the required measure without invoicing.

Order-related production

8

Field of application

Field of application according to DIN 4108-10

Insulation between rafters

Infilling insulation of walls and prefab constructions with wooden uprights

Insulation of wooden ceilings

Insulation of upper floor slab

Insulation of installation level

You may find an explicit explanation of the different fields of application on our technical data sheet.

Characteristics of wood fiber insulation board FLEX 50

ROOM 150

TOP

plasterboard

OSB

Solitex WA

DAD-dk, DZ, DI-zk, WH, WI-zk, WTR

OSB

MULTITHERM 180 D

FLEX

50

FLEX

IBLE

INSU

LATI

ON

BO

ARD

INSU

LATI

ON

BO

ARD

S

Flex 50 is the ideal insulation for rafter areas of ceilings and timberframing. Due to its consistence Flex 50 is user friendly

Product description

Nominal value of thermal conductivity λD: 0.037 W/(m·K)

Density: 50 kg/m³

Denomination insulation board WF-EN13171-T2-TR1-AF5-MU1/2German technical approval DiBt Z-23.15 1828Density 50 kg/m³Nominal value of thermal conductivity λD 0.037 W/(m·K)Rated value of thermal conductivity λ 0.038 W/(m·K)Reaction to fire according to DIN EN 13501 EBuilding material class according to DIN 4102 B2Complete declaration wood fibers, polyamide (binding fiber), ammonium phosphate (flame retardant)Production method dry processWater vapour / diffusion resistance 1/2Significant thermal capacity 2100 (J/kg K)Waste code according to AVV 030105, 170201

FLEX 50Infilling insulation

of constructions withwooden uprights

FLEX 50Insulation of theinstallation level

FLEX 50

9


Cover size(m² per board)

tongue and groove 580 x 1250 mm(0.73 m²)

580 x 1500 mm(0.87 m²)

580 x 2000 mm(1.16 m²)

580 x 2500 mm(1.45 m²)

Thickness mm Price per demand m² per pallet m² per pallet m² per pallet m² per pallet Units/pallet

60 • 29.00 34.80 46.40 58.00 40

80 • 21.75 26.10 34.80 43.50 30

100 • 17.40 20.88 27.84 34.80 24

120 • 14.50 17.40 23.20 29.00 20

140 • 11.60 13.92 18.56 23.20 16

160 • 10.15 12.18 16.24 20.30 14

180 • 8.70 10.44 13.92 17.40 12

200 • 8.70 10.44 13.92 17.40 12

220 • 7.25 8.70 11.60 14.50 10

240 • 7.25 8.70 11.60 14.50 10



shiplap edge 600 x 1250 mm (0.75 m²)

600 x 1500 mm (0.90 m²)

600 x 2000 mm (1.20 m²)

600 x 2500 mm (1.50 m²)


60 • 30.00 36.00 48.00 60.00 40

80 • 22.50 27.00 36.00 45.00 30

100 • 18.00 21.60 28.80 36.00 24

120 • 15.00 18.00 24.00 30.00 20

140 • 12.00 14.40 19.20 24.00 16

160 • 10.50 12.60 16.80 21.00 14

180 • 9.00 10.80 14.40 18.00 12

200 • 9.00 10.80 14.40 18.00 12

220 • 7.50 9.00 12.00 15.00 10

240 • 7.50 9.00 12.00 15.00 10


stump 600 x 1250 mm (0.75 m²)

600 x 1500 mm (0.90 m²)

600 x 2000 mm (1.20 m²)

600 x 2500 mm (1.50 m²)


40 • 43.50 52.50 69.90 87.00 58

60 • 30.00 36.00 48.00 60.00 40

80 • 22.50 27.00 36.00 45.00 30

100 • 18.00 21.60 28.80 36.00 24120 • 15.00 18.00 24.00 30.00 20

140 • 12.00 14.40 19.20 24.00 16

160 • 10.50 12.60 16.80 21.00 14

180 • 9.00 10.80 14.40 18.00 12

200 • 9.00 10.80 14.40 18.00 12

220 • 7.50 9.00 12.00 15.00 10

240 • 7.50 9.00 12.00 15.00 10

Other sizes are available on request.


Boards on stock Cover size = size of invoicing!No additional cost caused by the edge profile! A simple price! Please compare!

10

Product description

Multitherm 110 is a pressure-resistant wood fiber board with low weight and an excellent value for the thermal conductivity. Multitherm 110 may be used in roofs as well as in walls. In combination with Multitherm 140 it is an economical solution for thick insulation layers.

Field of application according to Din 4108-10

Foundation board of walls and roof

Suitable for the installation level

You may find an explicit explanation of thedifferent fields of application on our technicaldata sheet

Characteristics of wood fiber insulation board Multitherm 110

DAD-dg, DZ, DI-zg, DEO-dg, WAB-dg, WH, WI-zg, WTR

Solitex UD

DA Connect

MULTITHERM 140


Density: 110 kg/m³

Denomination insulation board WF-EN13171-T4-CS(10\Y)40 TR5-WS1.0 AF100 MU3German technical approval DiBt Z-23.15 1828Density 110 kg/m³Nominal value of thermal conductivity λD 0.037 W/(m·K)Rated value of thermal conductivity λ 0.039 W/(m·K)Reaction to fire according to DIN EN 13501 EBuilding material class according to DIN 4102 B2Complete declaration wood fibers, PMDI gluing, paraffinProduction method dry processCompressive resistance vertical to the plane of the panel ≥ 50 kPaWater vapour / diffusion resistance 3Linear flow resistance > 100 kPa·s/m²Short time water absorption ≤ 1.0 kg/m²Significant thermal capacity 2100 (J/kg K)Waste code according to AVV 030105, 170201

MU

LTIT

HER

M 1

10UN

IVER

SAL A

PPLI

CATI

ON

INSU

LATI

ON

BO

ARD

S

MULTITHERM 110Economical solution in

combination with MULTITHERM 140

11




580 x 1500 mm(0.87 m²)

580 x 2000 mm(1.16 m²)

580 x 2500 mm(1.45 m²)


40 • 42.05 50.46 67.28 84.10 58

60 • 29.00 34.80 46.40 58.00 40

80 • 21.75 26.10 34.80 43.50 30

100 • 17.40 20.88 27.84 34.80 24

120 • 14.50 17.40 23.20 29.00 20

140 • 11.60 13.92 18.56 23.20 16

160 • 10.15 12.18 16.24 20.30 14

180 • 8.70 10.44 13.92 17.40 12

200 • 8.70 10.44 13.92 17.40 12

220 • 7.25 8.70 11.60 14.50 10

240 • 7.25 8.70 11.60 14.50 10



600 x 1500 mm (0.90 m²)

600 x 2000 mm (1.20 m²)

600 x 2500 mm (1.50 m²)


40 • 43.50 52.20 69.60 87.00 58

60 • 30.00 36.00 48.00 60.00 40

80 • 22.50 27.00 36.00 45.00 30

100 • 18.00 21.60 28.80 36.00 24

120 • 15.00 18.00 24.00 30.00 20

140 • 12.00 14.40 19.20 24.00 16

160 • 10.50 12.60 16.80 21.00 14

180 • 9.00 10.80 14.40 18.00 12

200 • 9.00 10.80 14.40 18.00 12

220 • 7.50 9.00 12.00 15.00 10

240 • 7.50 9.00 12.00 15.00 10



stump 600 x 1250 mm (0.75 m²)

600 x 1500 mm (0.90 m²)

600 x 2000 mm (1.20 m²)

600 x 2500 mm (1.50 m²)


20 • 90.00 108.00 144.00 180.00 120

40 • 43.50 52.20 69.60 87.00 58

60 • 30.00 36.00 48.00 60.00 40

80 • 22.50 27.00 36.00 45.00 30

100 • 18.00 21.60 28.80 36.00 24

120 • 15.00 18.00 24.00 30.00 20

140 • 12.00 14.40 19.20 24.00 16

160 • 10.50 12.60 16.80 21.00 14

180 • 9.00 10.80 14.40 18.00 12

200 • 9.00 10.80 14.40 18.00 12

220 • 7.50 9.00 12.00 15.00 10

240 • 7.50 9.00 12.00 15.00 10




12

Characteristics of wood fiber insulation board Multitherm 140

MULTITHERM 110

Solitex UD

DA Connect


Insulation under roof

Insulation for walls and ceilings

Behind frontages

Directly on rafters

You may find an explicit explanation of the different fields of application on our technical data sheet.

DAD-dm, DI-zg, DEO-dm, WAB-dm, WH, WI-zg, WTR

011-7D006

Multitherm 140 is a pressure-resistant, completely water-repellentinsulation for roof and frontages. Due to its high stability andpressure-resistance it is suitable for applications under the floor screed.

Product description


Density: 140 kg/m³

Denomination insulation board WF-EN13171-T4-CS(10\Y)70-TR20-WS1.0-AF100-MU3German technical approval DiBt Z-23.15 1828Density 140 kg/m³Nominal value of thermal conductivity λD 0.040 W/(m·K)Rated value of thermal conductivity λ 0.042 W/(m·K)Reaction to fire according to DIN EN 13501 EBuilding material class according to DIN 4102 B2Complete declaration wood fibers, PMDI gluing, paraffinProduction method dry processCompressive resistance vertical to the plane of the plate ≥ 90 kPaTenacity vertical to the plane of the plate ≥ 20 kPaWater vapour / diffusion resistance 3Linear flow resistance > 100 kPa·s/m²Short time water absorption ≤ 1.0 kg/m²Significant thermal capacity 2100 (J/kg K)Waste code according to AVV 030105, 170201

MULTITHERM 140Pressure resistant insulation

board for the roof

MU

LTIT

HER

M 1

40UN

IVER

SAL A

PPLI

CATI

ON

INSU

LATI

ON

BO

ARD

S

13

TOPINSULATION BOARD – UNIVERSAL APPLICATIONWith slip resistant latex coating

011-7D007


tongue and groove 580 x 2000 mm (1.16 m²)

580 x 2500 mm (1.45 m²)

Thickness mm Price per demand m² per pallet m² per pallet Units/pallet

35 • 76.56 95.70 66

50 • 55.68 69.60 48

60 • 46.40 58.00 40

80 • 34.80 43.50 30

100 • 27.84 34.80 24

120 • 23.20 29.00 20

140 • 18.56 23.20 16

160 • 16.24 20.30 14

TOP 180 with higher density

Nominal value of thermal conductivity λD 0.042 W/(m·K) Rated value of thermal conductivity λ 0.044 W/(m·K)Density 180 kg/m³ Compressive resistance vertical to the plane of the plate ≥ 200 kPa

Tenacity vertical to the plane of the plate ≥ 30 kPa

TOP 220 with higher densityCover size

(m² per board)tongue and groove 580 x 2000 mm

(1.16 m²)580 x 2500 mm

(1.45 m²)


22 • 125.28 156.60 108

35 • 76.56 95.70 66

40 • 67.28 84.10 58

50 • 55.68 69.60 48

60 • 46.40 58.00 40






14

Product description TOP 220 and TOP 180

Weatherproof insulation board, which may be used astemporary roof during the construction period (from a pitch of 15°)

According to the statement of Holzforschung Austria suitable as rainproof roof according to ÖN B 4119.

Water resistant insulation board for roof and walls

UDP-A according to ZVDH


ROOM 150

TOP 220 or 180Weatherproof insulation

Installation directly on rafters

FLEX 50

DAD-ds, DI-zg, DEO-ds, WAB-ds, WH, WI-zg, WZTOP is a high pressure- and weather resistant insulation board. TOP may temporarily be used as weatherproof roof during the construction period, once the roof pitch is at least 15°. It is also excellent for the use as insulation for a weathered frontage. Due to its surface coating with latex the surface is slip resistant.

OSB

Characteristics of TOP 220 and TOP 180

German technical approval DiBt Z-23.15 1828Reaction to fire according to DIN EN 13501 EBuilding material class according to DIN 4102 B2Complete declaration wood fibers, PMDI gluing, paraffin, latexProduction method dry processWater vapour / diffusion resistance 3Linear flow resistance > 100 kPa·s/m²Short time water absorption < 1.0 kg/m²Significant thermal capacity 2100 (J/kg K)Waste code according to AVV 030105, 170201Technical data sheet: Download under www.schneider-holz.com

TOP

220,

TO

P 18

0IN

SULA

TIO

N B

OAR

DIN

SULA

TIO

N B

OA

RDS

15



(1.16 m²)580 x 2500 mm

(1.45 m²)


80 • 34.80 43.50 30

100 • 27.84 34.80 24

120 • 23.20 29.00 20

140 • 18.56 23.20 16

160 • 16.24 20.30 14





(1.16 m²)580 x 2500 mm

(1.45 m²)


100 • 27.84 34.80 24

120 • 23.20 29.00 20

140 • 18.56 23.20 16

160 • 16.24 20.30 14

180 • 13.92 17.40 12

200 • 13.92 17.40 12

220 • 11.60 14.50 10

240 • 11.60 14.50 10



TOPINSULATION BOARD – UNIVERSAL APPLICATIONWith slip resistant latex coating




16

Characteristics of TOP 160 und TOP 140

Product description TOP 160 and TOP 140 Field of application according to Din 4108-10DAD-ds, DI-zg, DEO-ds, WAB-ds, WH, WI-zg, WZ

TOP is a high pressure- and weather resistant insulation board. TOP may temporarily be used as weatherproof roof during the construction period, once the roof pitch is at least 15°. It is also excellent for the use as insulation for a weathered frontage. Due to its surface coating with latex the surface is slip resistant.

TOP 160 or 140Weatherproof insulation

To be posed directly on the rafter!

OSB

German technical approval DiBt Z-23.15 1828Reaction to fire according to DIN EN 13501 EBuilding material class according to DIN 4102 B2Complete declaration wood fibers, PMDI gluing, paraffin, latexProduction method dry processWater vapour / diffusion resistance 3Linear flow resistance > 100 kPa·s/m²Short time water absorption < 1.0 kg/m²Significant thermal capacity 2100 (J/kg K)Waste code according to AVV 030105, 170201Technical data sheet: Download under www.schneider-holz.com

ROOM 150

FLEX 50

TOP

160,

TO

P 14

0UN

IVER

SAL A

PPLI

CATI

ON

INSU

LATI

ON

BO

ARD

S

Weatherproof insulation board, which may be used astemporary roof during the construction period (from a pitch of 15°)

According to the statement of Holzforschung Austria suitable as rainproof roof according to ÖN B 4119.

Water resistant insulation board for roof and walls

UDP-A according to ZVDH

17





580 x 1250 mm(0.73 m²)

580 x 1500 mm(0.87 m²)

580 x 2000 mm(1.16 m²)


60 • 18.56 29.00 34.80 46.40 40

80 • 13.92 21.75 26.10 34.80 30

100 • 11.14 17.40 20.88 27.84 24

120 • 9.28 14.50 17.40 23.20 20

140 • 7.42 11.60 13.92 18.56 16

160 • 6.50 10.15 12.18 16.24 14

180 • 5.57 8.70 10.44 13.92 12

200 • 5.57 8.70 10.44 13.92 12



600 x 1250 mm (0.75 m²)

600 x 1500 mm (0.90 m²)

600 x 2000 mm (1.20 m²)


60 • 19.20 30.00 36.00 48.00 40

80 • 14.40 22.50 27.00 36.00 30

100 • 11.52 18.00 21.60 28.80 24

120 • 9.60 15.00 18.00 24.00 20

140 • 7.68 12.00 14.40 19.20 16

160 • 6.72 10.50 12.60 16.80 14

180 • 5.76 9.00 10.80 14.40 12

200 • 5.76 9.00 10.80 14.40 12


stump 600 x 800 mm (0.48 m²)

600 x 1250 mm (0.75 m²)

600 x 1500 mm (0.90 m²)

600 x 2000 mm (1.20 m²)


60 • 19.20 30.00 36.00 48.00 40

80 • 14.40 22.50 27.00 36.00 30

100 • 11.52 18.00 21.60 28.80 24

120 • 9.60 15.00 18.00 24.00 20

140 • 7.68 12.00 14.40 19.20 16

160 • 6.72 10.50 12.60 16.80 14


Boards on stock


18


WALL 140 is a high pressure proof, plasterable wood fiber insulationboard. It is to be fixed on solid wood or brickwork of exterior walls.

Product description

Exterior walls made of solid wood and brickwork

Plasterable

Characteristics of WALL 140

WALL 140WALL 140

ROOM 150 ROOM 150


Density: 140 kg/m³

Denomination insulation board Z-33.43-1368, Z-33.4-1366German technical approval DiBt Z-23.15 1828Density 140 kg/m³Nominal value of thermal conductivity λD 0.040 W/(m·K)Rated value of thermal conductivity λ 0.042 W/(m·K)Reaction to fire according to DIN EN 13501 EBuilding material class according to DIN 4102 B2Complete declaration wood fibers, PMDI gluing, paraffinProduction method dry processCompressive resistance vertical to the plane of the plate ≥ 100 kPaTenacity vertical to the plane of the plate ≥ 20 kPaWater vapour / diffusion resistance 3Linear flow resistance > 100 kPa·s/m²Short time water absorption ≤ 1.0 kg/m²Significant thermal capacity 2100 (J/kg K)Waste code according to AVV 030105, 170201Technical data sheet: Download under www.schneider-holz.com

NEW!WDVS approval

WA

LL 1

40PL

ASTE

RABL

E IN

TERI

OR

INSU

LATI

ON

BO

ARD

S

External plaster

Interior plaster

Interior plaster

External plaster

19

WALL 180RENDER BASEBOARD FOR TIMBER FRAMED CONSTRUCTIONS

WALL 180 PLASTER REVEAL BOARD




580 x 1500 mm(0.87 m²)

580 x 2000 mm(1.16 m²)

580 x 2500 mm(1.45 m²)


40 • 42.05 50.46 67.28 84.10 58

60 • 29.00 34.80 46.40 58.00 40

80 • 21.75 26.10 34.80 43.50 30

100 • 17.40 20.88 27.84 34.80 24

120 • 14.50 17.40 23.20 29.00 20

140 • 11.60 13.92 18.56 23.20 16

160 • 10.15 12.18 16.24 20.30 14


stump 600 x 1250 mm (0.75 m²)

600 x 1500 mm (0.90 m²)

600 x 2000 mm (1.20 m²)

600 x 2500 mm (1.50 m²)


20 • 90.00 108.00 144.00 180.00 120

40 • 43.50 52.20 69.60 87.00 58


Boards on stock


20


WALL 180 is a high pressure-resistant, plasterable wood fiber insulation board which is to be fixed on the post construction with wooden upright of exterior walls.

Product description

Exterior walls made of solid wood and brickwork

Plasterable

Characteristics of WALL 180

WALL 180

FLEX 50

FLEX 50

OSB

011-7D008


Density: 180 kg/m³

Denomination insulation board Z-33.43-1368, Z-33.4-1366German technical approval DiBt Z-23.15 1828Density 180 kg/m³Nominal value of thermal conductivity λD 0.042 W/(m·K)Rated value of thermal conductivity λ 0.044 W/(m·K)Reaction to fire according to DIN EN 13501 EBuilding material class according to DIN 4102 B2Complete declaration wood fibers, PMDI gluing, paraffinProduction method dry processCompressive resistance vertical to the plane of the plate ≥ 200 kPaTenacity vertical to the plane of the plate ≥ 30 kPaWater vapour / diffusion resistance 3Linear flow resistance > 100 kPa·s/m²Short time water absorption ≤ 1.0 kg/m²Significant thermal capacity 2100 (J/kg K)Waste code according to AVV 030105, 170201Technical data sheet: Download unter www.schneider-holz.com

NEW!WDVS approval

WA

LL 1

80PL

ASTE

RABL

E IN

SULA

TIO

N B

OAR

DIN

SULA

TIO

N B

OA

RDS

External plaster

Interior plaster

21

FLOOR 140INSULATION BOARD FOR THE FLOOR

ROOM 150RENDER BASEBOARD FOR INTERIOR APPLICATION

FLOOR 140


Density: 140 kg/m³


Density: 150 kg/m³


tongue and groove tongue and groove 580 x 1500 mm(0.87 m²)

580 x 2500 mm (1.45 m²)

Thickness mm Price per demand Price per demand m² per pallet m² per pallet Units/pallet

40 • • 50.46 84.10 58

60 • • 34.80 58.00 40


tongue and groove 580 x 1250 mm (0.73 m²)

Thickness mm Price per demand m² per pallet Units/pallet

40 • 42.05 58

60 • 29.00 40

80 • 21.75 30

100 • 17.40 24

Article code Description

6190FiFL2/60/35 Spruce joints strip 35 mm strong, 60 mm wide, 2 m long

Insulation board with tongue and groove joints, delivered with spruce joint strips for easy installation. It is especially suitable for long and short plank flooring, which screws to the spruce joint strips. Used without strips it is suitable as foundation for a floating dry screed construction.

Plasterable Interior wood fiber board ROOM 150. ROOM 150 may also be fixed on the post construction with wooden uprights.

German technical approval DiBt Z-23.15 1828Density 150 kg/m³Nominal value of thermal conductivity λD 0.041 W/(m·K)Rated value of thermal conductivity λ 0.043 W/(m·K)Reaction to fire according to DIN EN 13501 EBuilding material class according to DIN 4102 B2Compressive resistance vertical to the plane of the plate ≥ 90 kPaTenacity vertical to the plane of the plate ≥ 20 kPa

Characteristics of ROOM 150

German technical approval DiBt Z-23.15 1828Density 140 kg/m³Nominal value of thermal conductivity λD 0.040 W/(m·K)Rated value of thermal conductivity λ 0.042 W/(m·K)Reaction to fire according to DIN EN 13501 EBuilding material class according to DIN 4102 B2Compressive resistance vertical to the plane of the plate ≥ 100 kPaTenacity vertical to the plane of the plate ≥ 20 kPaLinear flow resistance > 100 kPa·s/m²Short time water absorption < 1.0 kg/m²

Characteristics of FLOOR 140

ROOM 150

WALL 140

External plaster

Interior plaster

22

MULTITHERM 180 DINSULATION BOARD WITH HIGHER PROTECTION AGAINST FIRE

LOAM RENDERING BOARDINTERIOR BASEBOARD PRE-RENDERED WITH LOAM

With our new best wood insulation board MULTITHERM 180 D we create new rules of safety and fire behaviour. The fire behaviour of MULTITHERM 180 D is rated as D-s2, d0 according to EN 13 501-1

Fulfills the increased demand on protection against fire of the insulation material according the ÖNORM B 3806 for ventilated facades.



Thickness mm Price per demand m² per pallet Units/pallet

20 • 139.20 120

40 • 67.28 58

60 • 46.40 40

80 • 34.80 30

100 • 27.84 24

120 • 23.20 20

140 • 18.56 16

160 • 16.24 14


German technical approval DiBt Z-23.15 1828Density 180 kg/m³Nominal value of thermal conductivity λD 0.042 W/(m·K)Rated value of thermal conductivity λ 0.044 W/(m·K)Reaction to fire according to DIN EN 13501 DBuilding material class according to DIN 4102 B2Compressive resistance vertical to the plane of the plate ≥ 200 kPaTenacity vertical to the plane of the plate ≥ 30 kPa

Characteristics of MULTITHERM 180 D

FLEX 50

MULTITHERM 180 D

ventilated frontage

OSB


Density: 180 kg/m³

625 x1250 mm(0.78 m²)

stump

Thickness of the board

in mm

Thickness including the loam rendering in mm

Price per demand

22 35

60 73

Pre-rendered wood fiber insulation board already pre-coated with loam on both sides.10 mm loam rendering with reinforcement on the front,3 mm loam rendering with reinforcement on the back.

Advantages•Loamrenderingcontrols the atmospheric moisture•Loamrenderingabsorbs contamination as well as odorants•Loamrenderinggivesyou always the feeling of fresh air•Loamrenderingishighly

appreciated by allergic persons

Installation1. Bolt or clamp the board2. Staple the joint reinforcement 3. Level the joints out4. Level the surface after the drying process5. Apply the undercoating 6. Apply the loam surface finishing

FLO

OR

140

/ RO

OM

150

MU

LTIT

HER

M 1

80 D

INSU

LATI

ON

BO

ARD

S

23

• Storeandinstallindrycondition• Createthebottomanglebycuttingofthetongueandusingabase

connector strip• Considerexpansionjoint,oncethebasestripisjoined• Wall140/180maynotbeusedontheground• Withoutadditionalactions,asplashwaterzoneofatleast⋝ 30 cm

above the upper edge of the ground, has to be created• Ensuretheimpermeabilityofjoints• Smallestsizeoftheboardsforthefrontage=40mm• Smallestsizeoftheboardsforthereveal=20mm• Jointstoborderingbuildingshavetobedrivingrainproofand

windproof• Makesurethatunevenareasareplannedorsmoothedbeforethe

beginning of the rendering • Makesuretoplacetheboardswithanoffsetof25cm(nocrossjoints)• Widebackbraceshavetobesteeped1mmintotheboard,whilethe

screw disc of the insulation screw has to be flushed to the surface of the board

GENERAL APPLICATION RULES

Installation guide for the timber frame construction

• Jointsbetweentheboardsof2mmaretolerable;jointsbetweentheboards of 2 – 5 mm have to be closed with adequate materials such as Schneider joint sealant. Joints of more than 5 mm have to be closed with stripes of WALL 140/180

• Createaflexibleorexpansionjointoncethereisaverticalorhorizontalchange of the underground

• Asecondtightlevelshouldbecreatedunderthewindowbench• Duringtheinstallationoftheendfittingofthewindowbenchesuse

joint less belt for all joint to WALL 140/180. The end fittings of the window benches have to absorb the moves of the plaster façade and the window bench. The use of fittings with sleeve bearings is recommended.

• Begintoapplytherendersystematleast4weeksaftertheinstallationof the WALL 140/180, if not, protect the façade with a ventilated cover

• Pleasecheckthemoisturecontentandthesurfacestabilitybeforethebeginning of the application of the render. Max. humidity 13 % (=19.5%onadjustmentspruce/fir)

• Protectinstalledboardsfromdirecthumidity• Byusinginjectedinsulationmakesuretoinsertitbeforethebeginning

of the render application.

Right

25 cm

No joint on mouth cornersPlace with an offset of 25 cm

Wrong

• TheWALL180isfixeddirectlyontherafters• FixationwithstainlesssteelwidebackbracessuchasHauboldorequivalent• Minimallengthofthefixationmaterial=sizeoftheboard+minimumpenetrationdepth• Minimumpenetrationdepthofthewidebackbrace⋝ 30 mm• Minimumpenetrationdepthoftheinsulationscrewforwoodenundergrounds⋝ 30 mm• TheinstallationoverheadisexclusivelypossiblewithWALL180withasizeofatleast60mm(heightofboard)andinsulationscrewsforwooden

undergrounds. In any case do not exceed the dimension between axes of 40 cm by construction of the important supporting substructure.

Fixation of the boards with wide back braces or insulation screws

24

Minimum quantity of fixing devices Maximum dimension between axes for WALL 180 (tongue and groove)

Minimum length of fixing devices

Thickness of the

insulation

Wide back braces(Haubold or equivalent)minimum length in mm

Insulation screw (Fischer Thermofix 6H or equivalent )

minimum length in mm

Insulation screw(Ejotherm STR H or equivalent)

minimum length in mm20 75 -- --40 75 80 8060 90 100 10080 110 120 120

100 130 140 140120 150 160 160140 180 190 180160 -- 190 200180 -- 210 220200 -- 230 240

Blast pressure according to DIN 1055-4 [kN/m2]

- 1.00 - 1.60

Insulation screw (B) 6 pcs/m2 10 pcs/m2

Wide back braces (A) 16 pcs/m2 16 pcs/m2

Thickness of the board maximum dimension between axes40 mm 62.5 cm60 mm 83.3 cm 80 / 100 / 120 / 140 / 160 mm 91.5 cm

580

mm

Example for laying WALL 180 Size of the board 580 x 12500 mm, dimension between axes of the studs 62.5 cm

62.5 cm

1250 mm

6 pcs/m2

25 cm

25 cm

10 pcs/m2 16 pcs/m2

16 cm10 cm

10 cm

10 cm

10 cm

10 cm

16 cm

16 cm

580

mm

Example for the WALL 180 Size of the board 580 x 1500 mm, dimension between axes of the studs 83.3 cm

1500 mm

83.3 cm

10 pcs/m2

12 cm

12 cm

12 cm

12 cm

6 pcs/m2

17 cm

17 cm

17 cm

16 pcs/m2

7 cm

7 cm

7 cm

7 cm

7 cm7 cm

7 cm

USE

R ̀S

GU

IDE

25

Installation guide for supporting solid wood undergroundsFixation of the boards with wide back braces or insulation screws

• WALL140orWALL180maybeusedfortheinstallationonholohedralwoodenundergrounds• FixationwithstainlesssteelwidebackbracessuchasHauboldorwithinsulationscrews• Minimumpenetrationdepthofthewidebackbrace≥ 30 mm• Minimumpenetrationdepthoftheinsulationscrewforwoodenundergrounds≥ 30 mm• Pleaseconsiderbreakingjointofminimum30cmontheinstallationoftwolayers

Installation in single layer Installation double layer

Combination possibilities for the installation of two layers on holohedral wooden undergrounds

Thickness of the

insulation

single layer

double layer maximal thickness

1st layer

double layer minimal thickness

2nd layer

wide back braces(Haubold or equivalent)minimal length in mm

insulation screw(Fischer Thermofix 6H

or equivalent) minimal length in mm

insulation screw(Ejotherm STR H,

or equivalent) minimal length in mm

20 20 -- -- 75 -- --

40 40 -- -- 75 80 80

60 60 -- -- 90 100 100

80 80 -- -- 110 120 120

100 100 -- -- 130 140 140

120 120 60 stump 60 stump 150 160 160

140 140 80 stump 60 stump 180 190 180

160 160 100 stump 60 stump -- 190 200

180 180 120 stump 60 stump -- 210 220

200 200 140 shiplap edge 60 stump -- 230 240

220 -- 160 shiplap edge 60 stump -- 250 260

240 -- 160 shiplap edge 80 T+G / stump -- 310 280

260 -- 180 shiplap edge 80 T+G / stump -- 310 300

280 -- 200 shiplap edge 80 T+G / stump -- 310 --

Distance between fixing devices

Wide back braces A ≤ 170 mm, B ≤ 370 mm

Minimum quantity of fixing devices


- 1.00 - 1.60

Insulation screw (B) 6 pcs/m2 10 pcs/m2

Wide back braces (A) 16 pcs/m2 16 pcs/m2

26

Installation guide for minerally undergrounds

Base detail

Fixation of the boards with insulation dowels

• Fixationofthebaserailwithadistanceofe≤ 30 cm• Onthejointofthebaserailinstallbaseconnectorstrips• Cutoffthetongueonthefirstlineoftheboardsandputthe

boards holohedral on the base rail • Ensureajointlessinstallationofthefurtherboards• Withoutadditionalactionsasplashwaterzoneofatleast ≤ 30 cm above the upper edge of the ground has to be created

• Thegivenquantityoffixingdeviceshastobestrictlykept• Onlyfixationsonbearingsurfacesarestaticallyeffective• Anchoringdepthincement≥ 25 mm, in aerated concrete

or masonry ≥ 65 mm

Recommended dowel picture for installation screws or dowels (for example using boards of 600 x 1250 mm) on the installation on holohedral wooden or mineral undergrounds.

Minimum quantity of fixing devices


- 1.00 - 1.60

Insulation dowels 6 pcs/m2 10 pcs/m2

6 pcs/m2 10 pcs/m2

USE

R ̀S

GU

IDE

27

Holzwerk Gebr. Schneider GmbHKappel 2888436 EberhardzellDEUTSCHLANDPhone +49 (0)7355 9320-0Fax +49 (0)7355 9320-300E-Mail [email protected]

Holzwerk Schneider u. CoBucherstrasse 109556 AffeltrangenSCHWEIZPhone +41 (0)71 918 79 79Fax +41 (0)71 918 79 78E-Mail [email protected]

Errors, technical changes and omissions exceptedEN.EUR.HF.01.13.

HEADQUARTER GERMANY

GERMANY

SUBSIDIARY SWITZERLAND

SWITZERLAND

www.schneider-holz.com

Holzwerk Gebr. Schneider GmbHGERMANY

Holzwerk Schneider u. CoSWITZERLAND

Date post:	18-Jul-2021
Category:	Documents
Upload:	others
View:	1 times
Download:	0 times

INSULATION · 2013. 8. 26. · insolation boards on the most modern production line all over...

Documents