Advantages of Integrated Fixture Based LED Classroom Lighting Systems

Advantages of Integrated Fixture-Based LED Classroom Lighting Systems

Presented by Roger Koch

What is an integrated LED fixture?Integrated LED FixtureLED Bulb

Integrated LED Fixtures are more Energy and Cost Efficient Compared to LED BulbsIntegrated LED FixtureLED BulbUp to 5,000 lumens/fixture100,000 hours of service lifeUp to 10 year warrantyTypically 600 lumens/bulbTypically 15,000 hours of service lifeTypically 2 year warranty

Flush Mount Wide Area Dispersion LED Fixtures Are Available

High fixture efficacy

Evenly disbursed illumination

Reduces uneven light distribution, which creates adjacent bright and dark areas

High system efficiency

LED Fixtures Provide Nearly Constant Lumen Output for their Entire Lifespan

No need to design for late cycle fixture light output

Improves system energy efficiency

LED Chips are Constantly Improving Lumen per Watt Output

This type of chip can deliver over 150 lumens/watt

This is the most efficient light-generating technology in current existence

Many LED Products are DimmableThis further reduces system energy requirements

Use of Zones

Zones allow different lighting levels in different parts of the classroom

This saves energy

This improves projected image presentations

Use of Sensor-Based Controls

Occupancy sensors can be used to turn off lights when the room is not occupied

Light sensors can be used to accommodate daylight harvesting

Saves energy costs

Improved Color Spectrum Delivered by LED Lighting

LED White Light Spectrum

Reduction in Eye Strain and HeadachesTeachers and students alike endorse the product

LED Lighting is a Green SolutionNo mercury in the LED system

Produces 45-50 ft. candles of superior illumination at desk level utilizing only 0.5-0.6 watts/sq. ft.

Additional energy savings when utilizing dimming, zones and control sensors in the system

Most energy-efficient system available by a wide margin

Exceeds LEED Platinum levels

Take a load off your maintenance budget

Eliminates costly bulb, ballast, lens, and failed fixture replacement costs

Even more important in difficult to access and service locations

Easy and Inexpensive to Install The D/C option can be installed as a class 2 low voltage D/C system

This is the same certification as for cable, telephone, security and internet systems

A typical classroom installation can be completed in 3-5 man-hours

Sample Cost-Benefit AnalysesThe Miami Country Day Lower School canopy lighting fixture replacement project

The Miami Country Day High School canopy lighting fixture replacement project

A typical classroom lighting system replacement project