Date post: | 08-Aug-2015 |
Category: |
Education |
Upload: | elearningja |
View: | 116 times |
Download: | 0 times |
XXXX
BEGINIntegrated Science Module 1 Unit 1Lesson 3a
Integrated Science Module 1 Unit 1Lesson 3a
Some Tools used in ScienceSome Tools used in Science
The BunsenBurner
XXXX
OVERVIEWOVERVIEW
OBJECTIVESOBJECTIVES
Parts of a Bunsen burner
Parts of a Bunsen burner
Using a Bunsen burner
Using a Bunsen burner
Safety Precautions
Safety Precautions
REVIEWREVIEW
CREDITSCREDITS
OVERVIEWOVERVIEW
In science, it is important to carry out experiments to confirm/develop theories.
Many science experiments need to be carried out in a controlled environment in order to achieve the correct results.
Many experiments need certain equipment to work or to help us make observations, some of which are potential hazards.
This is why in science, we use laboratories that are built in specific ways and contain certain equipment to help lessen hazards.
While working in the lab, there are many different lab apparatus (or ‘tools’) that we use. You will be introduced to some of them in this lesson..
2http://tinyurl.com/mw6nv6c
XXXX
OVERVIEWOVERVIEW
OBJECTIVESOBJECTIVES
Parts of a Bunsen burner
Parts of a Bunsen burner
Using a Bunsen burner
Using a Bunsen burner
Safety Precautions
Safety Precautions
REVIEWREVIEW
CREDITSCREDITS
OBJECTIVESOBJECTIVES
This set of slides will help you to be able to: describe safety precautions needed when using a
lit Bunsen burner. identify the parts of a Bunsen burner and state the
function/s of each part. demonstrate the correct procedure in lighting and
using a Bunsen burner. distinguish between the appearance and use of
luminous and non-luminous flames. work amicably together in groups.
3
XXXX
OVERVIEWOVERVIEW
OBJECTIVESOBJECTIVES
Parts of a Bunsen burner
Parts of a Bunsen burner
Using a Bunsen burner
Using a Bunsen burner
Safety Precautions
Safety Precautions
REVIEWREVIEW
CREDITSCREDITS
Safety PrecautionsSafety Precautions
4
There are many hazards in the science lab. Look out for these hazard symbols in the lab.There are many hazards in the science lab. Look out for these hazard symbols in the lab.
Note also these safety signs and symbols.
Note also these safety signs and symbols.
Harmful Explosive CorrosiveDangerous
for the environment
Flammable Toxic Oxidising Electrical hazard
General Danger
Radioactive Biohazard Poison
XXXX
OVERVIEWOVERVIEW
OBJECTIVESOBJECTIVES
Parts of a Bunsen burner
Parts of a Bunsen burner
Using a Bunsen burner
Using a Bunsen burner
Safety Precautions
Safety Precautions
REVIEWREVIEW
CREDITSCREDITS
Safety Precautions Safety Precautions While using the Bunsen burnerWhile using the Bunsen burner
A Bunsen burner poses a hazard because when lit, you’re working with fire!
1. Look around the lab now to note the location of: Fire extinguisher/hose, any other fire safety equipment and exit door/s.
2. Watch ‘How to use a portable fire extinguisher’ at > http://www.youtube.com/watch?v=BLjoWjCrDqg
You will learn more about types and uses of fire extinguishers in later lessons.
3. Read aloud and discuss the information on the next two slides with your teacher.
5
XXXX
OVERVIEWOVERVIEW
OBJECTIVESOBJECTIVES
Parts of a Bunsen burner
Parts of a Bunsen burner
Using a Bunsen burner
Using a Bunsen burner
Safety Precautions
Safety Precautions
REVIEWREVIEW
CREDITSCREDITS
Safety Precautions Safety Precautions While using the Bunsen burnerWhile using the Bunsen burner
6
XXXX
OVERVIEWOVERVIEW
OBJECTIVESOBJECTIVES
Parts of a Bunsen burner
Parts of a Bunsen burner
Using a Bunsen burner
Using a Bunsen burner
Safety Precautions
Safety Precautions
REVIEWREVIEW
CREDITSCREDITS
Safety Precautions Safety Precautions While using the Bunsen burnerWhile using the Bunsen burner
7http://www.cityu.edu.hk/cse/safety/Safety_training/Course/ppe/ppe_hand.html
XXXX
OVERVIEWOVERVIEW
OBJECTIVESOBJECTIVES
Parts of a Bunsen burner
Parts of a Bunsen burner
Using a Bunsen burner
Using a Bunsen burner
Safety Precautions
Safety Precautions
REVIEWREVIEW
CREDITSCREDITS
Parts of a Bunsen burnerParts of a Bunsen burner
Robert Bunsen, a German chemist, is said to have invented the Bunsen burner in 1855.
We use this science tool or apparatus as a source of heat when working in the science laboratory.
Get out your Bunsen burner now and use the video below, from start to 2.14, to examine it and to identify the various parts> http://www.jove.com/science-education/5035/introduction-to-the-bunsen-burner (Introduction to the Bunsen burner)
8
XXXX
OVERVIEWOVERVIEW
OBJECTIVESOBJECTIVES
Parts of a Bunsen burner
Parts of a Bunsen burner
Using a Bunsen burner
Using a Bunsen burner
Safety Precautions
Safety Precautions
REVIEWREVIEW
CREDITSCREDITS
Activity 2.1: Activity 2.1: What are the parts of a What are the parts of a Bunsen burner?Bunsen burner?
Label the diagram using these words.
air hole chimney collar tubing gas tap
chimney
air hole
collartubing
gas tap
CHECK ANSWERSCHECK ANSWERS
9
XXXX
OVERVIEWOVERVIEW
OBJECTIVESOBJECTIVES
Parts of a Bunsen burner
Parts of a Bunsen burner
Using a Bunsen burner
Using a Bunsen burner
Safety Precautions
Safety Precautions
REVIEWREVIEW
CREDITSCREDITS
Parts of a Bunsen burnerParts of a Bunsen burner
10
CAUTION ! You’re about to light your burner . Remember … Do not place the burner close to the edge of the lab bench, as knocking it over could start a fire!
Look at your teacher’s
demonstration of the separate parts of a
Bunsen burner. Note how they fit together.
XXXX
OVERVIEWOVERVIEW
OBJECTIVESOBJECTIVES
Parts of a Bunsen burner
Parts of a Bunsen burner
Using a Bunsen burner
Using a Bunsen burner
Safety Precautions
Safety Precautions
REVIEWREVIEW
CREDITSCREDITS
11
Using the burnerSteps in lighting the burner
http://alkirascience.wikispaces.com/file/view/SD1+Pages+10+-+11.pdf
1. Continue to watch the same video up to 4.29 > http://www.jove.com/science-education/5035/introduction-to-the-bunsen-burner
2. Also watch > http://www.youtube.com/watch?v=9QpIcX-xw1Q
3. Attach the burner tubing to a gas tap.
4. Close the air hole at the base of the burner.
Now do the following: Click here to animate instructions.
XXXX
OVERVIEWOVERVIEW
OBJECTIVESOBJECTIVES
Parts of a Bunsen burner
Parts of a Bunsen burner
Using a Bunsen burner
Using a Bunsen burner
Safety Precautions
Safety Precautions
REVIEWREVIEW
CREDITSCREDITS
12
Using the burnerSteps in lighting the burner
.
5. Light a match/splint/lighter and hold it over the chimney.
6. Turn on the gas tap. You should get a flame.
XXXX
OVERVIEWOVERVIEW
OBJECTIVESOBJECTIVES
Parts of a Bunsen burner
Parts of a Bunsen burner
Using a Bunsen burner
Using a Bunsen burner
Safety Precautions
Safety Precautions
REVIEWREVIEW
CREDITSCREDITS
13
Using the burner – Activity 3.1: Luminous & non-luminous flames
7. Close the air hole, then slowly open it. Observe the flame.
.
Which of these show the colour of the flame when the air hole is closed? When it is open?
http://de.wikipedia.org/wiki/Datei:Bunsen_burner_flame_types_.jpg
11 22 33 44
XXXX
OVERVIEWOVERVIEW
OBJECTIVESOBJECTIVES
Parts of a Bunsen burner
Parts of a Bunsen burner
Using a Bunsen burner
Using a Bunsen burner
Safety Precautions
Safety Precautions
REVIEWREVIEW
CREDITSCREDITS
14
Using the burnerUsing the burnerFlame types Flame types
Feedback : The Bunsen burner that had its valve closed formed the orange-yellow flame of #1, which is a luminous flame or ‘safety flame’ as it can always be seen.
The burner that had its valve open to the maximum, so more oxygen/air was available for complete combustion, formed the blue flame # 4, which is a non-luminous, roaring flame. It is also the hottest flame and it produces little, or no, soot.
Different flame types of a Bunsen burner depend on oxygen supply.
XXXX
OVERVIEWOVERVIEW
OBJECTIVESOBJECTIVES
Parts of a Bunsen burner
Parts of a Bunsen burner
Using a Bunsen burner
Using a Bunsen burner
Safety Precautions
Safety Precautions
REVIEWREVIEW
CREDITSCREDITS
Using the burnerUsing the burnerFlame types Flame types
The area in which there is intense, complete combustion is where the blue flame is hottest.
15
This area of the blue flame, shown by the red arrow, is what we should use when strongly heating containers of substances. This area of the blue flame, shown by the red arrow, is what we should use when strongly heating containers of substances.
XXXX
OVERVIEWOVERVIEW
OBJECTIVESOBJECTIVES
Parts of a Bunsen burner
Parts of a Bunsen burner
Using a Bunsen burner
Using a Bunsen burner
Safety Precautions
Safety Precautions
REVIEWREVIEW
CREDITSCREDITS
Using the burner Using the burner Flame types Flame types
16
AIR HOLE CLOSED = Yellow-orange, luminous ‘safety’ flame
AIR HOLE HALF OPEN = Blue, quiet, non-luminous flame.
AIR HOLE FULLY OPEN = Blue, ‘roaring’ non-luminous flame.
Normal heating is done with an object at the top of the light blue outer cone, while strong heating is done with an object at the top of the bright blue inner cone.
To heat a container gently, move the container back and forth through the outer cone.
XXXX
OVERVIEWOVERVIEW
OBJECTIVESOBJECTIVES
Parts of a Bunsen burner
Parts of a Bunsen burner
Using a Bunsen burner
Using a Bunsen burner
Safety Precautions
Safety Precautions
REVIEWREVIEW
CREDITSCREDITS
Using the burner: Using the burner: Activity 3.2: Activity 3.2: Heating water on a burnerHeating water on a burner
Check the diagrams below for equipment used for heating/boiling substances such as water on a Bunsen burner.
Set up similar equipment as shown at right. Show your teacher.
17
.Tripod stand
BeakerBunsen Burner
Wire gauze
1 . Prepare a Bunsen Burner with blue flame.
2.Put a tripod over the Bunsen Burner.
3.Place a wire gauze onto the tripod.
4.Place a beaker with 50 ml of water onto the wire gauze. Heat the water to boiling.
© EduArt Multimediahttp://www.climatechangematters.net.au/LOTS/Chem/sub/boilingcond/image1.htm
XXXX
OVERVIEWOVERVIEW
OBJECTIVESOBJECTIVES
Parts of a Bunsen burner
Parts of a Bunsen burner
Using a Bunsen burner
Using a Bunsen burner
Safety Precautions
Safety Precautions
REVIEWREVIEW
CREDITSCREDITS
Using the burnerUsing the burner
It is very important to remember to turn off the gas when not using the burner and disconnect it, allow it to cool, then store the burner in the cupboard.
1. Check now that you’ve done that!
2. Then do the Summary and the Review questions on the next set of slides.
18
.
XXXX
OVERVIEWOVERVIEW
OBJECTIVESOBJECTIVES
Parts of a Bunsen burner
Parts of a Bunsen burner
Using a Bunsen burner
Using a Bunsen burner
Safety Precautions
Safety Precautions
REVIEWREVIEW
CREDITSCREDITS
SUMMARYSUMMARY
19
To light a Bunsen burner …. Place the Bunsen burner on a heatproof
mat . Connect the gas hose to the gas tap. Make sure that the air hole is closed. Light the match/splint or lighter. Turn on the gas. Bring the match close to the Bunsen
burner. The flame produced will be yellow (safety flame).
Gradually open the air hole so that the flame will go blue (hottest, roaring flame).
XXXX
OVERVIEWOVERVIEW
OBJECTIVESOBJECTIVES
Parts of a Bunsen burner
Parts of a Bunsen burner
Using a Bunsen burner
Using a Bunsen burner
Safety Precautions
Safety Precautions
REVIEWREVIEW
CREDITSCREDITS
20
Review Activity 1 Review Activity 1
Draw a diagram in your notebook that would be part of your lab report to show equipment you set up and used to boil a beaker of water in the science laboratory.
.FeedbackA line drawing like this should be done. It should look like a section cut through the apparatus, so for example, you would not show all three legs of the tripod nor the circular mouth of the beaker. Note an arrow could indicate the heat source, usually from a burner. You should not use colour and a title should be added.
Image modified from > http://www.slideshare.net/giordepasamba/scientific-drawings
XXXX
OVERVIEWOVERVIEW
OBJECTIVESOBJECTIVES
Parts of a Bunsen burner
Parts of a Bunsen burner
Using a Bunsen burner
Using a Bunsen burner
Safety Precautions
Safety Precautions
REVIEWREVIEW
CREDITSCREDITS
21
What comments would you make about the way this student uses his burner in the lab?
Feedback
The student is using the burner safely!
1. The students wear a lab coat buttoned up; also wear protective eyeglasses since they’re using fire.
2. The burner is on a heat resistant mat (inferred!).
3. It is also inferred that he is using the hottest, blue flame since it cannot be easily seen as a luminous, yellow flame.
4. The mouth of the tube is turned away from him and his lab partner, so that if hot liquid spurts out, neither will get burned.
5. Neither their clothes nor other equipment/materials are near the burner.
Review Activity 2 Review Activity 2 Think and TellThink and Tell
http://www.shutterstock.com/s/%22bunsen+burner%22/search.html#id=70747255&src=S88ojtQoN2nqFsP_FnUdGg-1-41
XXXX
OVERVIEWOVERVIEW
OBJECTIVESOBJECTIVES
Parts of a Bunsen burner
Parts of a Bunsen burner
Using a Bunsen burner
Using a Bunsen burner
Safety Precautions
Safety Precautions
REVIEWREVIEW
CREDITSCREDITS
Review Activity 3 Review Activity 3
1. Do the ‘Drag and Drop’ activity at > http://www.echalk.co.uk/Science/practicalSkills/BunsenBurner/DnD/BunsenBurner.html
2. Write the letters to show the correct sequence of steps to follow for lighting a Bunsen burner.
22
A B C D E F
Feedback = C, D, B, E, F, A
XXXX
OVERVIEWOVERVIEW
OBJECTIVESOBJECTIVES
Parts of a Bunsen burner
Parts of a Bunsen burner
Using a Bunsen burner
Using a Bunsen burner
Safety Precautions
Safety Precautions
REVIEWREVIEW
CREDITSCREDITS
23
Review Activity 4a Review Activity 4a
a. Which kind of flame is hotter?
.
Feedback: Flame B is the hotter flame..
Flame A with air hole of
burner closed yellow in colour Incomplete
combustion occurs luminous
Flame B with air hole of
burner opened blue in colour complete
combustion occurs non-luminous
XXXX
OVERVIEWOVERVIEW
OBJECTIVESOBJECTIVES
Parts of a Bunsen burner
Parts of a Bunsen burner
Using a Bunsen burner
Using a Bunsen burner
Safety Precautions
Safety Precautions
REVIEWREVIEW
CREDITSCREDITS
24
Review Activity 4b Review Activity 4b
b. Which zone is hottest?
Feedback: Zone B is the hottest area in the flame..
XXXX
OVERVIEWOVERVIEW
OBJECTIVESOBJECTIVES
Parts of a Bunsen burner
Parts of a Bunsen burner
Using a Bunsen burner
Using a Bunsen burner
Safety Precautions
Safety Precautions
REVIEWREVIEW
CREDITSCREDITS
REFERENCES/CREDITSREFERENCES/CREDITS
http://www.shutterstock.com/s/%22bunsen+burner%22/search.html#id=36172678&src=S88ojtQoN2nqFsP_FnUdGg-1-1
http://www.fotosearch.com/illustration/science-lab.html#comp.asp?recid=57040466&xtra http://www.education.ie/en/Publications/Education-Reports/Safety-in-School-Science.pdf http://chemistry.about.com/od/healthsafety/ig/Laboratory-Safety-Signs/ http://www.cityu.edu.hk/cse/safety/Safety_training/Course/ppe/ppe_hand.html http://de.wikipedia.org/wiki/Datei:Bunsen_burner_flame_types_.jpg http://www.uq.edu.au/_School_Science_Lessons/3.1.4.0ch.GIF http://www.uq.edu.au/_School_Science_Lessons/3.1.4.1ch.GIF http://www.shutterstock.com/s/%22bunsen+burner%22/
search.html#id=1725004&src=S88ojtQoN2nqFsP_FnUdGg-1-27 © EduArt Multimedia
http://www.climatechangematters.net.au/LOTS/Chem/sub/boilingcond/image1.htm http://alkirascience.wikispaces.com/file/view/SD1+Pages+10+-+11.pdf http://www.slideshare.net/giordepasamba/scientific-drawings http://www.shutterstock.com/s/%22bunsen+burner%22/
search.html#id=70747255&src=S88ojtQoN2nqFsP_FnUdGg-1-41 http://www.echalk.co.uk/Science/practicalSkills/BunsenBurner/DnD/BunsenBurner.html
25