SmartPrep Brochure
ww
w.h
orizo
ntec
hinc
.com
/sm
artp
repWork smarter with the
new SmartPrep™ Extractor
LocationsWorld HeadquartersNorth America45 Northwestern DriveSalem, NH 03079 USATel: +1.603.893.3663Fax: +1.603.893.4994
About Us Since 1993, Horizon Technology has provided a total solutions approach to the automation of solid phase extraction and sample prep for environmental water samples. By blending a wealth of chemistry knowledge, applications know-how, instrument and SPE disk manufacturing expertise, with our commitment to customer service, we proudly support today’s environmental laboratories.
www.horizontechinc.com
Optional Accessories
January 2012 / 2500
Ordering Information
System Specfications
Conditions
For a full listing of all compounds visit www.horizontechinc.com/smartprepDrinking Water Extraction with SmartPrep: EPA Method 525.2
• 5 ug/L 525.2 spikes in DI water at pH2• 1g Cartridges, Phenomenex Strata 6 mL (batch S201-99)• Extracts dried by DryDisk followed by sodium sulfate
• Concentrated to 1 mL • Analyzed by GC/MS • SPE cartridge, C-18, 6 mL
Results compliant with EPA limits of Method 525.2 Section 9.3 Initial Demonstration of Laboratory Accuracy and Precision.
2-Nitro-m-xy
lene
10
5
7.6
83.8
9.1
Naphthalene
8.6
79.1
10.8
Dichlorvo
s
6.1
109.
85.
6
Butylate
2.1
1.8
1.7
2.0
106.
9
1.7
Vernolate
108.
2
2,6-Dinitrotoluene
8.0
83.8
11.1
2,4-Dinitrotoluene
9.4
85.1
9.1
Atraton
7.5
95.1
7.9
Hexachlorobenzen
e
5.1
93.7
5.5
Prometon
2.1
2.2
2.1
1.3
1.1
1.8
1.8
1.7
113.
9
Simazine
116.
8
Atrazine
117.
4
Pentac
hlorophenol
5.5
5.6
122.
64.
5
Terbufos
4.6
107.
04.
3
Pronamide
Diazinon
d-BHC
Pyrene-d
10Pyre
ne
Napropamide
trans-N
onachlor
4,4'-D
DEDield
rin
Tricycla
zole
1.7
117.
6
1.4
1.2
72.7
1.4
120.
9
5.2
94.6
5.5
5.1
95.6
5.4
6.3
107.
55.
9
7.7
5.8
5.9
6.1
5.9
97.0
6.0
6.2
6.0
5.1
94.4
100.
7
116.
3
Endrin Ketone
Methoxy
chlor
Benz(a)an
thracene
Chrysene
Indeno(1,2,3-cd)pyre
ne
Dibenz(ah)an
thracene
4.4
111.
14.
0
3.2
109.
82.
9
5.4
3.9
97.8
2.2
5.4
4.0
100.
8
99.4
96.5
Standard Deviation
%RSD
Average % Recovery(4 runs)
Standard Deviation
PercentRSD
Average Percent Recovery(4 runs)
Tel: +1.603.893.3663www.horizontechinc.com
Horizon Technology’s affordable, modular solution to solid phase extraction features easy to use, proprietary software developed by chemists for maximum sample throughput and optimal chromatography. Simplify sample preparation in your lab while enhancing data integrity.
Part Number Accessory
49-2812-02 Collection rack, 2x6 for twelve 40 mL VOA vials
49-2812-03 Collection rack, 2x6 for twelve 13x100 mm (9.5 mL) test tube
49-2812-04 Collection rack, 2x6 for twelve 10 mL graduated Wheaton vials
49-2100-03 Inserts for 1 mL cartridges (15 Pk.)
49-2300-03 Inserts for 3 mL cartridges (15 Pk.)
49-2810-02 10” Stainless steel sip tubes (12 Pk.)
49-2810-03 5” Stainless steel sip tubes (12 Pk.)
49-2814-01 3.1micronfilters(50Pk.)
49-2815-01 Universal tilting sample rack (Four 1 liter bottles - 12, 40 mL VOA vials)
49-2810-01 Automatic sample bottle rinse module
49-2100-04 Cleaning cartridges 1 mL (50 Pk.)
49-2300-04 Cleaning cartridges 3 mL (50 Pk.)
49-2600-04 Cleaning cartridges 6 mL (50 Pk.)
System Component Specification
Cartridge Size 1, 3, 6, mL
Number of Cartridges 12
Number of Reagents Supported 8
Collection Tubes 12 & 13 mm test tubes and 20 & 40 mL vials
Sample Volume 1.0 mL - 4.0 Liter
Number of Samples 12-96 Sequential & up to 8 simulanteously
Physical Dimensions 18”H x 8.5”W x 22.5”D
Weight 43 lbs
Electrical Input 110-240 VAC
Gas Requirements Nitrogen (Max pressure 60 PSI)
Regulatory Compliance CE, ETL, CSA C22.2 #61010-1, ANSI/UL 61010-1
Intelligent Automated Solid Phase Extraction
Advancing the power of SPE
Intelligent Automated Solid Phase Extraction
Unprecedented versatility
Unique Advantages for Small Volume Sample Preparation
Ordering Information
SmartPrepisthefirsteverautomated,small-footprintextractionsystemdesignedspecificallyforscalablecartridgebasedSPEofawiderangeofcontaminantsincleanaqueous or organic matrices. SmartPrep combines intellegence, versatility and ease of use, making automated SPE simple and affordable for method developers and sample prep laboratories. Using pre-loaded EPA or custom methods, SmartPrep can apply different methods to each sample or process up to 96 samples of the same method at once in batch mode. SmartPrep offers these additional features:
SmartPrep can process up to 12 samples per module. With a reagent mixing chamber, solidsamplesiptubesandinlinemembranefiltertopreventclogging,SmartPrephasallthe answers. A reagent manager assistant, liquid sensing and an optional bottle rinse for up to six samples ensures your work is done right while saving time and money.
Only SmartPrep features the versatility to process individual samples with unique SPE methods while using batch-mode processing for high throughput sample prep applications.
Simplify Cartridge-based Solid Phase Extraction
• Uses much less solvent than a typical LLE/CLLE procedure• Positivepressurefluiddeliveryequatestobetterchromatography• Cartridges are inexpensive and readily available• Produces no emulsions• Processessmallsamplevolumes(1.0mL-500mL)veryefficiently• Cartridge sizes vary to optimize sample throughput (1,3, or 6 mL)• Many EPA methods already developed and ready for use
SmartPrep Extractor:
SmartPrep Accessories make it easy to get more done in less time.
SmartPrep
Small, Clean Samples Large Volume, Heavily Contaminted
SPE-DEX 4790
Sample bottle sip tubes (10" & 5")
Cartridge carousel insert adapters (1 mL & 3 mL)
Collection racks (20 mL & 40 mL)
In-linesamplefilter3.1µm
Horizon offers the perfect solution for preparing any environmental water sample in the spectrum
• Optional automatic rinse of sample containers• Positive pressure via 6 mL syringe• Modular and scalable—Up to eight modules from one PC• Process up to 12 samples sequentially or 8 samples in parallel• Small footprint—saves bench space• Collect up to four fractions per sample• Independent methods can be applied to each sample• Batch mode sample processing• Total walk-away automation
Forensics
SmartPrep applicationsA new standard for
water analysis:
Environmental
Life Sciences
Pesticides
Drugs of Abuse
Dioxins and PCBs
Protien Purification
Personal Care Products
UCMR 3
Herbicides
Sample Clean Up
Must order one of the following SmartPrep Starter Kits listed below with the base module.
Benefits of automating with SmartPrep
TheintuitivesoftwaredesignedbyHorizonchemistsspecificallyfortheSmartPrep offers many features integral to speeding up the SPE process and handling multiple methods across large batches to keep your workstation runtime at peak performance.
Pre-program all 12 samples from a library of EPA Methods (each sample can have an individual method) and let SmartPrep run continuously. The software then offers dynamic, active status updates for each step of each module and alerts the operator of potential problems. A powerful feature allows programs to be run without connection to a PC.
Other Software Features Include:
• Automatic reports generated• Password protection• Diagnostic mode• Reagent management• Pause and resume methods easily• Sample volume calculator
Intuitive Graphical Software Interface
Automatic processes make running samples easier than ever. On screen status icons inform the operator of each SPE function as they happen.
With increasing sample throughput demands, automating any manual SPE process with the SmartPrep will drastically improve your lab’s bottom line while minimizing labor expense, improving productivity and freeing up precious manpower.
SmartPrep is compatible with most kinds of commercially available 1, 3 and 6 mL cartridges and comes pre-loaded with proven methods—ideal for small clean samples. If you are manually performing SPE the SmartPrep can accommodate your needs while improving data consistency.
Automate Your Manual SPE Methods Easily
Contact UsWorld Headquarters45 Northwestern DriveSalem, NH 03079 USATel: +1.603.893.3663Fax: +1.603.893.4994
www.horizontechinc.com
Labo
rato
ry S
avin
gs (
$$)
Number of Samples
SPE-2600 SmartPrep Extractor Base Module (12 sample capacity) Inclusive of:
(1) 6 mL Plunger Assembly
(1) Tubing Set –Installed (including reagent sample lines)
(1) USB cable (module to hub)
(1) Drip tray
Gas feed tubing kit (49-2820-01)
(1) Sample collection rack (2x6) for 20 mL VOA vials
6 mL SPE cartridge sample pack w/ cleaning cartridge
Universal power supply (with US cord) (110-240VAc input)*
(1) Waste line kit (3 lines, 6 ft. each, male luer fittingsbothends,numbered1-3)
Compatible with most 1, 3, and 6 mL SPE cartridges
49-2807-01 SmartPrep Starter Kit w/Device Controller (supports 1-8 Base Modules) Inclusive of:
(1) CD with operating software, initial methods and operating manual
(1) Nitrogen gas regulator/bracket assembly
(1) USB Hub and cable
(1) Device controller module (PC)
OR 49-2807-02 SmartPrep Starter Kit w/out Device Controller (supports 1-8 Base Modules) Inclusive of:
(1) CD with operating software, initial methods and operating manual
(1) Nitrogen gas regulator/bracket assembly
(1) USB Hub and cable
Scalable and modular, link up to 8 SmartPrep Extractors and controll them from one PC.
Unprecedented versatility
Unique Advantages for Small Volume Sample Preparation
Ordering Information
SmartPrepisthefirsteverautomated,small-footprintextractionsystemdesignedspecificallyforscalablecartridgebasedSPEofawiderangeofcontaminantsincleanaqueous or organic matrices. SmartPrep combines intellegence, versatility and ease of use, making automated SPE simple and affordable for method developers and sample prep laboratories. Using pre-loaded EPA or custom methods, SmartPrep can apply different methods to each sample or process up to 96 samples of the same method at once in batch mode. SmartPrep offers these additional features:
SmartPrep can process up to 12 samples per module. With a reagent mixing chamber, solidsamplesiptubesandinlinemembranefiltertopreventclogging,SmartPrephasallthe answers. A reagent manager assistant, liquid sensing and an optional bottle rinse for up to six samples ensures your work is done right while saving time and money.
Only SmartPrep features the versatility to process individual samples with unique SPE methods while using batch-mode processing for high throughput sample prep applications.
Simplify Cartridge-based Solid Phase Extraction
• Uses much less solvent than a typical LLE/CLLE procedure• Positivepressurefluiddeliveryequatestobetterchromatography• Cartridges are inexpensive and readily available• Produces no emulsions• Processessmallsamplevolumes(1.0mL-500mL)veryefficiently• Cartridge sizes vary to optimize sample throughput (1,3, or 6 mL)• Many EPA methods already developed and ready for use
SmartPrep Extractor:
SmartPrep Accessories make it easy to get more done in less time.
SmartPrep
Small, Clean Samples Large Volume, Heavily Contaminted
SPE-DEX 4790
Sample bottle sip tubes (10" & 5")
Cartridge carousel insert adapters (1 mL & 3 mL)
Collection racks (20 mL & 40 mL)
In-linesamplefilter3.1µm
Horizon offers the perfect solution for preparing any environmental water sample in the spectrum
• Optional automatic rinse of sample containers• Positive pressure via 6 mL syringe• Modular and scalable—Up to eight modules from one PC• Process up to 12 samples sequentially or 8 samples in parallel• Small footprint—saves bench space• Collect up to four fractions per sample• Independent methods can be applied to each sample• Batch mode sample processing• Total walk-away automation
Forensics
SmartPrep applicationsA new standard for
water analysis:
Environmental
Life Sciences
Pesticides
Drugs of Abuse
Dioxins and PCBs
Protien Purification
Personal Care Products
UCMR 3
Herbicides
Sample Clean Up
Must order one of the following SmartPrep Starter Kits listed below with the base module.
Benefits of automating with SmartPrep
TheintuitivesoftwaredesignedbyHorizonchemistsspecificallyfortheSmartPrep offers many features integral to speeding up the SPE process and handling multiple methods across large batches to keep your workstation runtime at peak performance.
Pre-program all 12 samples from a library of EPA Methods (each sample can have an individual method) and let SmartPrep run continuously. The software then offers dynamic, active status updates for each step of each module and alerts the operator of potential problems. A powerful feature allows programs to be run without connection to a PC.
Other Software Features Include:
• Automatic reports generated• Password protection• Diagnostic mode• Reagent management• Pause and resume methods easily• Sample volume calculator
Intuitive Graphical Software Interface
Automatic processes make running samples easier than ever. On screen status icons inform the operator of each SPE function as they happen.
With increasing sample throughput demands, automating any manual SPE process with the SmartPrep will drastically improve your lab’s bottom line while minimizing labor expense, improving productivity and freeing up precious manpower.
SmartPrep is compatible with most kinds of commercially available 1, 3 and 6 mL cartridges and comes pre-loaded with proven methods—ideal for small clean samples. If you are manually performing SPE the SmartPrep can accommodate your needs while improving data consistency.
Automate Your Manual SPE Methods Easily
Contact UsWorld Headquarters45 Northwestern DriveSalem, NH 03079 USATel: +1.603.893.3663Fax: +1.603.893.4994
www.horizontechinc.com
Labo
rato
ry S
avin
gs (
$$)
Number of Samples
SPE-2600 SmartPrep Extractor Base Module (12 sample capacity) Inclusive of:
(1) 6 mL Plunger Assembly
(1) Tubing Set –Installed (including reagent sample lines)
(1) USB cable (module to hub)
(1) Drip tray
Gas feed tubing kit (49-2820-01)
(1) Sample collection rack (2x6) for 20 mL VOA vials
6 mL SPE cartridge sample pack w/ cleaning cartridge
Universal power supply (with US cord) (110-240VAc input)*
(1) Waste line kit (3 lines, 6 ft. each, male luer fittingsbothends,numbered1-3)
Compatible with most 1, 3, and 6 mL SPE cartridges
49-2807-01 SmartPrep Starter Kit w/Device Controller (supports 1-8 Base Modules) Inclusive of:
(1) CD with operating software, initial methods and operating manual
(1) Nitrogen gas regulator/bracket assembly
(1) USB Hub and cable
(1) Device controller module (PC)
OR 49-2807-02 SmartPrep Starter Kit w/out Device Controller (supports 1-8 Base Modules) Inclusive of:
(1) CD with operating software, initial methods and operating manual
(1) Nitrogen gas regulator/bracket assembly
(1) USB Hub and cable
Scalable and modular, link up to 8 SmartPrep Extractors and controll them from one PC.
SmartPrep Brochure
Work smarter with the new SmartPrep™ Extractor
For a full listing of all compounds visit www.horizontechinc.com/smartprep
• 5 ug/L 525.2 spikes in DI water at pH2• 1g Cartridges, Phenomenex Strata 6 mL (batch S201-99)• Extracts dried by DryDisk followed by sodium sulfate
• Concentrated to 1 mL • Analyzed by GC/MS • SPE cartridge, C-18, 6 mL
Results compliant with EPA limits of Method 525.2 Section 9.3 Initial Demonstration of Laboratory Accuracy and Precision.
2-Nitro-m-xy
lene
10
5
7.6
83.8
9.1
Naphthalene
8.6
79.1
10.8
Dichlorvos
6.1
109.
85.
6
Butylate
2.1
1.8
1.7
2.0
106.
9
1.7
Vernolate
108.
2
2,6-Dinitrotoluene
8.0
83.8
11.1
2,4-Dinitrotoluene
9.4
85.1
9.1
Atraton
7.5
95.1
7.9
Hexachlorobenzen
e
5.1
93.7
5.5
Prometon
2.1
2.2
2.1
1.3
1.1
1.8
1.8
1.7
113.
9
Simazine
116.
8
Atrazine
117.
4
Pentac
hlorophenol
5.5
5.6
122.
64.
5
Terbufos
4.6
107.
04.
3
Pronamide
Diazinon
d-BHC
Pyrene-d
10Pyre
ne
Napropamide
trans-N
onachlor
4,4'-D
DEDield
rin
Tricycla
zole
1.7
117.
6
1.4
1.2
72.7
1.4
120.
9
5.2
94.6
5.5
5.1
95.6
5.4
6.3
107.
55.
9
7.7
5.8
5.9
6.1
5.9
97.0
6.0
6.2
6.0
5.1
94.4
100.
7
116.
3
Endrin Ketone
Methoxy
chlor
Benz(a)an
thracene
Chrysene
Indeno(1,2,3-cd)pyre
ne
Dibenz(ah)an
thracene
4.4
111.
14.
0
3.2
109.
82.
9
5.4
3.9
97.8
2.2
5.4
4.0
100.
8
99.4
96.5
Standard Deviation
%RSD
Average % Recovery(4 runs)
Standard
PercentRSD
Average Percent Recovery(4 runs)
Horizon Technology’s affordable, modular solution to solid phase extraction features easy to use, proprietary software developed by chemists for maximum sample throughput and optimal chromatography. Simplify sample preparation in your lab while enhancing data integrity.
Part Number Accessory
49-2812-02 Collection rack, 2x6 for twelve 40 mL VOA vials
49-2812-03 Collection rack, 2x6 for twelve 13x100 mm (9.5 mL) test tube
49-2812-04 Collection rack, 2x6 for twelve 10 mL graduated Wheaton vials
49-2100-03 Inserts for 1 mL cartridges (15 Pk.)
49-2300-03 Inserts for 3 mL cartridges (15 Pk.)
49-2810-02 10” Stainless steel sip tubes (12 Pk.)
49-2810-03 5” Stainless steel sip tubes (12 Pk.)
49-2814-01 3.1 micron (50 Pk.)
49-2815-01 Universal tilting sample rack (Four 1 liter bottles - 12, 40 mL VOA vials)
49-2810-01 Automatic sample bottle rinse module
49-2100-04 Cleaning cartridges 1 mL (50 Pk.)
49-2300-04 Cleaning cartridges 3 mL (50 Pk.)
49-2600-04 Cleaning cartridges 6 mL (50 Pk.)
System Component
Cartridge Size 1, 3, 6, mL
Number of Cartridges 12
Number of Reagents Supported 8
Collection Tubes 12 & 13 mm test tubes and 20 & 40 mL vials
Sample Volume 1.0 mL - 4.0 Liter
Number of Samples 12-96 Sequential & up to 8 simulanteously
Physical Dimensions 18”H x 8.5”W x 22.5”D
Weight 43 lbs
Electrical Input 110-240 VAC
Gas Requirements Nitrogen (Max pressure 60 PSI)
Regulatory Compliance CE, ETL, CSA C22.2 #61010-1, ANSI/UL 61010-1
Intelligent Automated Solid Phase Extraction
Advancing the power of SPE
Intelligent Automated Solid Phase Extraction
SmartPrep Brochure
ww
w.h
oriz
onte
chin
c.co
m/s
mar
tpre
pWork smarter with the new SmartPrep™ Extractor
World HeadquartersNorth America45 Northwestern DriveSalem, NH 03079 USATel: +1.603.893.3663Fax: +1.603.893.4994
About Us Since 1993, Horizon Technology has provided a total solutions approach to the automation of solid phase extraction and sample prep for environmental water samples. By blending a wealth of chemistry knowledge, applications know-how, instrument and SPE disk manufacturing expertise, with our commitment to customer service, we proudly support today’s environmental laboratories.
www.horizontechinc.com
January 2012 / 2500
For a full listing of all compounds visit www.horizontechinc.com/smartprep
• 5 ug/L 525.2 spikes in DI water at pH2• 1g Cartridges, Phenomenex Strata 6 mL (batch S201-99)• Extracts dried by DryDisk followed by sodium sulfate
• Concentrated to 1 mL • Analyzed by GC/MS • SPE cartridge, C-18, 6 mL
Results compliant with EPA limits of Method 525.2 Section 9.3 Initial Demonstration of Laboratory Accuracy and Precision.
2-Nitro-m-xy
lene
10
5
7.6
83.8
9.1
Naphthalene
8.6
79.1
10.8
Dichlorvos
6.1
109.
85.
6
Butylate
2.1
1.8
1.7
2.0
106.
9
1.7
Vernolate
108.
2
2,6-Dinitrotoluene
8.0
83.8
11.1
2,4-Dinitrotoluene
9.4
85.1
9.1
Atraton
7.5
95.1
7.9
Hexachlorobenzen
e5.
193
.75.
5Prometo
n
2.1
2.2
2.1
1.3
1.1
1.8
1.8
1.7
113.
9Simazin
e
116.
8
Atrazine
117.
4
Pentac
hlorophenol
5.5
5.6
122.
64.
5
Terbufos
4.6
107.
04.
3
Pronamide
Diazinon
d-BHC
Pyrene-d
10Pyre
ne
Napropamide
trans-N
onachlor
4,4'-D
DEDield
rin
Tricycla
zole
1.7
117.
6
1.4
1.2
72.7
1.4
120.
9
5.2
94.6
5.5
5.1
95.6
5.4
6.3
107.
55.
9
7.7
5.8
5.9
6.1
5.9
97.0
6.0
6.2
6.0
5.1
94.4
100.
7
116.
3
Endrin Ketone
Methoxy
chlor
Benz(a)an
thracene
Chrysene
Indeno(1,2,3-cd)pyre
ne
Dibenz(ah)an
thracene
4.4
111.
14.
0
3.2
109.
82.
9
5.4
3.9
97.8
2.2
5.4
4.0
100.
8
99.4
96.5
Standard Deviation
%RSD
Average % Recovery(4 runs)
Standard
PercentRSD
Average Percent Recovery(4 runs)
Horizon Technology’s affordable, modular solution to solid phase extraction features easy to use, proprietary software developed by chemists for maximum sample throughput and optimal chromatography. Simplify sample preparation in your lab while enhancing data integrity.
Part Number Accessory
49-2812-02 Collection rack, 2x6 for twelve 40 mL VOA vials
49-2812-03 Collection rack, 2x6 for twelve 13x100 mm (9.5 mL) test tube
49-2812-04 Collection rack, 2x6 for twelve 10 mL graduated Wheaton vials
49-2100-03 Inserts for 1 mL cartridges (15 Pk.)
49-2300-03 Inserts for 3 mL cartridges (15 Pk.)
49-2810-02 10” Stainless steel sip tubes (12 Pk.)
49-2810-03 5” Stainless steel sip tubes (12 Pk.)
49-2814-01 3.1 micron (50 Pk.)
49-2815-01 Universal tilting sample rack (Four 1 liter bottles - 12, 40 mL VOA vials)
49-2810-01 Automatic sample bottle rinse module
49-2100-04 Cleaning cartridges 1 mL (50 Pk.)
49-2300-04 Cleaning cartridges 3 mL (50 Pk.)
49-2600-04 Cleaning cartridges 6 mL (50 Pk.)
System Component
Cartridge Size 1, 3, 6, mL
Number of Cartridges 12
Number of Reagents Supported 8
Collection Tubes 12 & 13 mm test tubes and 20 & 40 mL vials
Sample Volume 1.0 mL - 4.0 Liter
Number of Samples 12-96 Sequential & up to 8 simulanteously
Physical Dimensions 18”H x 8.5”W x 22.5”D
Weight 43 lbs
Electrical Input 110-240 VAC
Gas Requirements Nitrogen (Max pressure 60 PSI)
Regulatory Compliance CE, ETL, CSA C22.2 #61010-1, ANSI/UL 61010-1
Intelligent Automated Solid Phase Extraction
Advancing the power of SPE
Intelligent Automated Solid Phase Extraction
Unique Advantages for
SmartPrep is the ever automated, small-footprint extraction system designed ly for scalable cartridge based SPE of a wide range of contaminants in clean
aqueous or organic matrices. SmartPrep combines intellegence, versatility and ease of use, making automated SPE simple and affordable for method developers and sample prep laboratories. Using pre-loaded EPA or custom methods, SmartPrep can apply different methods to each sample or process up to 96 samples of the same method at once in batch mode. SmartPrep offers these additional features:
SmartPrep can process up to 12 samples per module. With a reagent mixing chamber, solid sample sip tubes and inline membrane to prevent clogging, SmartPrep has all the answers. A reagent manager assistant, liquid sensing and an optional bottle rinse for up to six samples ensures your work is done right while saving time and money.
• Uses much less solvent than a typical LLE/CLLE procedure• Positive pressure delivery equates to better chromatography• Cartridges are inexpensive and readily available• Produces no emulsions• Processes small sample volumes (1.0 mL - 500 mL) very • Cartridge sizes vary to optimize sample throughput (1,3, or 6 mL)• Many EPA methods already developed and ready for use
SmartPrep Extractor:
SmartPrep Accessories make it easy to get more done in less time.
SmartPrep
Small, Clean Samples Large Volume, Heavily Contaminted
SPE-DEX 4790
Sample bottle sip tubes (10" & 5")
Cartridge carousel insert adapters (1 mL & 3 mL)
Collection racks (20 mL & 40 mL)
In-line sample lter3.1µm
• Optional automatic rinse of sample containers• Positive pressure via 6 mL syringe• Modular and scalable—Up to eight modules from one PC• Process up to 12 samples sequentially or 8 samples in parallel• Small footprint—saves bench space• Collect up to four fractions per sample• Independent methods can be applied to each sample• Batch mode sample processing• Total walk-away automation
Forensics
A new standard for water analysis:
Environmental
Life Sciences
Pesticides
Drugs of Abuse
Dioxins and PCBs
Protien Purification
Personal Care Products
UCMR 3
Herbicides
Sample Clean Up
Must order one of the following SmartPrep Starter Kits listed below with the base module.
The intuitive software designed by Horizon chemists for the SmartPrep offers many features integral to speeding up the SPE process and handling multiple methods across large batches to keep your workstation runtime at peak performance.
Pre-program all 12 samples from a library of EPA Methods (each sample can have an individual method) and let SmartPrep run continuously. The software then offers dynamic, active status updates for each step of each module and alerts the operator of potential problems. A powerful feature allows programs to be run without connection to a PC.
Other Software Features Include:
• Automatic reports generated• Password protection• Diagnostic mode• Reagent management• Pause and resume methods easily• Sample volume calculator
Automatic processes make running samples easier than ever. On screen status icons inform the operator of each SPE function as they happen.
With increasing sample throughput demands, automating any manual SPE process with the SmartPrep will drastically improve your lab’s bottom line while minimizing labor expense, improving productivity and freeing up precious manpower.
SmartPrep is compatible with most kinds of commercially available 1, 3 and 6 mL cartridges and comes pre-loaded with proven methods—ideal for small clean samples. If you are manually performing SPE the SmartPrep can accommodate your needs while improving data consistency.
Automate Your Manual SPE Methods Easily
Labo
rato
ry S
avin
gs (
$$)
Number of Samples
SPE-2600 SmartPrep Extractor Base Module (12 sample capacity) Inclusive of:
(1) 6 mL Plunger Assembly
(1) Tubing Set –Installed (including reagent sample lines)
(1) USB cable (module to hub)
(1) Drip tray
Gas feed tubing kit (49-2820-01)
(1) Sample collection rack (2x6) for 20 mL VOA vials
6 mL SPE cartridge sample pack w/ cleaning cartridge
Universal power supply (with US cord) (110-240VAc input)*
(1) Waste line kit (3 lines, 6 ft. each, male luer both ends, numbered 1-3)
Compatible with most 1, 3, and 6 mL SPE cartridges
49-2807-01 SmartPrep Starter Kit w/Device Controller (supports 1-8 Base Modules) Inclusive of:
(1) CD with operating software, initial methods and operating manual
(1) Nitrogen gas regulator/bracket assembly
(1) USB Hub and cable
(1) Device controller module (PC)
OR 49-2807-02 SmartPrep Starter Kit w/out Device Controller (supports 1-8 Base Modules) Inclusive of:
(1) CD with operating software, initial methods and operating manual
(1) Nitrogen gas regulator/bracket assembly
(1) USB Hub and cable
Scalable and modular, link up to 8 SmartPrep Extractors and controll them from one PC.