Leica CloudPro Intelligent point cloud processingfor Leica ALS-series LIDAR
One for all: Leica CloudPro
Want to get data processed fast, in your desired format and projection … without having to leave your point cloud
generation software? Don’t waste valuable upload/download time going to additional software packages to get data
in the right projection. Process large point clouds, even in the field on a laptop computer.
Make it your own and cut processing time even further by running Leica CloudPro remotely via the built-in
command-line interface in your custom workflows.
Cut costs by running a fleet of workstations from a single licence server, allowing the entire office to access
Leica CloudPro as they need it without buying a licence for every workstation.
Fast… nUp to 700,000 points per second on a
laptop computer1, including data loading
and point cloud saving
Flexible… n Leica XPro projection engine provides 12
different projection types and 461 unique
projections, allowing data to be output
in nearly all region-specific coordinate
systems
n Editable grid_parameters file allows
creation of new projections as needed
n Run unlimited instances on the same
machine for multi-flight processing
n Run within your customised workflows
using the built-in command-line interface,
or directly access Leica CloudPro from
GeoCue2 job management software for
off-the-shelf distributed processing
capabilities3
n Leica CloudPro is the first point
cloud generation software from any
manufacturer to be directly accessed
by GeoCue
Functional… n Processing and calibrations settings are
stored in unique flight-line-tagged XML
files for ultimate traceability in processed
data. Get a definitive record of the
calibration constants and data processing
settings used for each LAS file processed,
for the exact moment processing was
completed. No more guessing about
what settings were used to process a
given data set.
nGenerate beautiful full-resolution TIFF
images
Leica CloudProFast, Flexible, Functional…
System Requirements
Operating system Microsoft® 4 Windows® 4 7 64-bit or XP 64-bit
Processor Workstation or laptop with minimum Intel 5 Core™ 5 i5 Processor or equivalent
RAM Minimum 4 GB RAM, 8 GB RAM recommended for better performance
Disk space (installation only)
Minimum 700 MB free disk space for installation folder
Disk Space (Processing)
Minimum 40 GB recommended for handling dataset and output point cloud/TIF images
I/O SATA, eSATA or USB 3.0 recommended
Storage SSD recommended
Feature Summary
Input formats Trajectory: BET, SOLPoint Data: Leica ALS40, ALS50-I, ALS50-II, ALS60, ALS70, ALS80FWD Data: Leica WDM65
Output formats Point Cloud: LAS 1.0-1.4Intensity Images: TIFProcessing / Calibration data: XML
Projection options 461 pre-programmed projections in 18 projection groups: Canada, Malaysia, UTM_North, UTM_South, US_State_Plane_NAD27, US_State_Plane_NAD83, Germany, Japan, Japan_JGD2000, Swiss, Sweden, Austria, Korea, Korea(New), Romania, Ireland, Morocco, Czech_Republic_and_Slovakia
Custom projections 12 generic projection types for creation of user-defined projections (via editing of grid_parameters file), including: Transverse Mercator, Cassini Soldner (transverse equidisant cylindrical), HOM (Hotine Oblique Mercator), Lambert Conformal, Mercator, Polar Stereographic, Polyconic, Stereographic, UTM, New Zealand, Sinusoidal, OCC
Processing filters GPS time, subsampling ratio, range, min/max scan angle, edge clip
Illustrations, descriptions and technical data are not binding. All rights reserved. Printed in Switzerland – Copyright Leica Geosystems AG, Heerbrugg, Switzerland, 2014. 827781en – 08.14 – galledia
Leica Geosystems AG Heerbrugg, Switzerland
www.leica-geosystems.comhttp://di.leica-geosystems.com
1 Intel CORE™ i7 @ 2.7 GHz, 16 GB RAM, eSATA, SSD, Windows® 7 64-bit OS2 Trademark GeoCue3 Requires one Leica CloudPro license per machine to which processing is distributed4 Microsoft and Windows are trademarks of Microsoft Corporation5 Intel and CORE are trademarks of Intel Corporation
n Serve multiple licenses from a single license server with Flex-Net
floating license system; purchase only as many licenses as you need
to run simultaneously, not one for each workstation.
n Input and output filters allow processing to be limited to a specific
spatial range, speeding up processing for localised portions of a job
n Additional output filters available for special applications using
various system attributes (e.g., scan angle, scan direction, etc.)
n Bundled with Leica AHAB LSS Viewer; see and make measurements
from point clouds immediately after generating them