12
Intelligent Rubber Processing Additive Solutions Opening A World Of New Opportunities
Struktol AdditivesProduct Overview
• Activators
• Coated Metal Oxides
• Coated Sulfur
• Dispersing Agents
• Homogenizing Agents
• Mandrel Release
• Peptizers
• Plasticizers
• Polyethylene Waxes
• Processing Agents
• Silane Coupling Agents
• Slab Dips
• Slip Agents (Amides)
• Specialty Polymers
• Tackifying Resins
Struktol Company of America201 E. Steels Corners RoadP.O. Box 1649Stow, OH 44224-0649330-928-5188800-327-8649Fax: 330-928-0013Email: [email protected]
Struktol Company of America is a member of the Schill & Seilacher family of companies, with representation in
over 100 countries around the world. A global organization with over a century of specialty chemical expertise,
Schill & Seilacher markets most of their polymer processing products under the brand name STRUKTOL® – a name
that has become synonymous with both quality and performance. Struktol manufactures chemicals for the plastics
and rubber industry, foam inhibitors, polydispersions, silicone emulsions, products used in latex processing, and
POLYDIS®, a line of epoxy prepolymers and flame retardants.
The Struktol approach to the rubber and plastic additives business is by no means typical or ordinary. Chemistry
is at the heart of everything we do. Providing Intelligent Additive Solutions, Struktol products are designed to
meet the challenges and exacting demands of our customers. Our technical specialists, R&D chemists and
compound laboratory are dedicated to creating innovative solutions for the ever-changing polymer industry –
solutions that keep you ahead of your competition with increased productivity, better quality parts and lower
overall cost. In addition to premium product performance, Struktol Customer Service initiatives have become
the industry benchmark.
Struktol Company of America
www.struktol.com
TEB0041/2017
Struktol’s vast polymer additive experience is translated into the most intelligent
solutions available anywhere. Each of our additives are tested and retested to
insure maximum product quality and performance consistency.
Struktol manufactures a complete line of additives that function individually
or in combination in both natural and synthetic rubber. By providing a full
range of material-enhancing products, i.e. dispersants, homogenizers,
lubricants, peptizers, plasticizers and tackifiers, the incorporation of Struktol
additives can significantly improve processability for all stages of rubber
production. We are a flexible innovation partner, producing our additives
in accordance with the demanding specifications of our customers and
reacting swiftly to market needs, adapting new technologies quickly to
ensure customer satisfaction and loyalty.
Get To Know Struktol
Quick Guides
Intelligent Rubber Processing Additive Solutions
Opening A World Of New Opportunities
• Superior viscosity control
• Improved mold release
• Improved mixing and uniform filler dispersion
• Decreased mixing times and energy
• Improved ease of manufacturing
Depend on Struktol Additives for:
When it comes to polymer additives, Struktol’s vast chemical experience is translated into the most intelligent
solutions available anywhere. Our sales and technical staff are the industry’s most knowledgeable polymer
additive experts and are dedicated to improving your processing performance.
Struktol Intelligent Additive Solutions make polymers easier to process ensuring maximum product quality
and performance consistency. Our extensive R&D capabilities allow us to formulate solutions that enable
you to stay ahead of your competition. And our ISO 9001 certification means our quality management
system is focused on delivering product quality each and every order.
Let our extensive line of products improve the functionality,
quality and performance values in your business.
Intelligent Additive Solutions for the Polymer Industry
• Outstanding customer and technical services
• State-of-the-art laboratory testing capabilities
• Custom product development
• Just-in-time shipping
Depend on Struktol Company for:
At Struktol, we’ve built a reputation for unique, dynamic and cost-effective solutions.
Let us help your business open a world of new opportunities.
Call us today at 330-928-5188 or visit us on the web at www.struktol.com.
• Superior viscosity control
• Improved mold release
• Improved mixing and uniform filler dispersion
• Decreased mixing times and energy
• Improved ease of manufacturing
Depend on Struktol Additives for:
When it comes to polymer additives, Struktol’s vast chemical experience is translated into the most intelligent
solutions available anywhere. Our sales and technical staff are the industry’s most knowledgeable polymer
additive experts and are dedicated to improving your processing performance.
Struktol Intelligent Additive Solutions make polymers easier to process ensuring maximum product quality
and performance consistency. Our extensive R&D capabilities allow us to formulate solutions that enable
you to stay ahead of your competition. And our ISO 9001 certification means our quality management
system is focused on delivering product quality each and every order.
Let our extensive line of products improve the functionality,
quality and performance values in your business.
Intelligent Additive Solutions for the Polymer Industry
• Outstanding customer and technical services
• State-of-the-art laboratory testing capabilities
• Custom product development
• Just-in-time shipping
Depend on Struktol Company for:
At Struktol, we’ve built a reputation for unique, dynamic and cost-effective solutions.
Let us help your business open a world of new opportunities.
Call us today at 330-928-5188 or visit us on the web at www.struktol.com.
Struktol AdditivesProduct Overview
• Activators
• Coated Metal Oxides
• Coated Sulfur
• Dispersing Agents
• Homogenizing Agents
• Mandrel Release
• Peptizers
• Plasticizers
• Polyethylene Waxes
• Processing Agents
• Silane Coupling Agents
• Slab Dips
• Slip Agents (Amides)
• Specialty Polymers
• Tackifying Resins
Struktol Company of America201 E. Steels Corners RoadP.O. Box 1649Stow, OH 44224-0649330-928-5188800-327-8649Fax: 330-928-0013Email: [email protected]
Struktol Company of America is a member of the Schill & Seilacher family of companies, with representation in
over 100 countries around the world. A global organization with over a century of specialty chemical expertise,
Schill & Seilacher markets most of their polymer processing products under the brand name STRUKTOL® – a name
that has become synonymous with both quality and performance. Struktol manufactures chemicals for the plastics
and rubber industry, foam inhibitors, polydispersions, silicone emulsions, products used in latex processing, and
POLYDIS®, a line of epoxy prepolymers and flame retardants.
The Struktol approach to the rubber and plastic additives business is by no means typical or ordinary. Chemistry
is at the heart of everything we do. Providing Intelligent Additive Solutions, Struktol products are designed to
meet the challenges and exacting demands of our customers. Our technical specialists, R&D chemists and
compound laboratory are dedicated to creating innovative solutions for the ever-changing polymer industry –
solutions that keep you ahead of your competition with increased productivity, better quality parts and lower
overall cost. In addition to premium product performance, Struktol Customer Service initiatives have become
the industry benchmark.
Struktol Company of America
www.struktol.com
TEB0041/2017
Struktol’s vast polymer additive experience is translated into the most intelligent
solutions available anywhere. Each of our additives are tested and retested to
insure maximum product quality and performance consistency.
Struktol manufactures a complete line of additives that function individually
or in combination in both natural and synthetic rubber. By providing a full
range of material-enhancing products, i.e. dispersants, homogenizers,
lubricants, peptizers, plasticizers and tackifiers, the incorporation of Struktol
additives can significantly improve processability for all stages of rubber
production. We are a flexible innovation partner, producing our additives
in accordance with the demanding specifications of our customers and
reacting swiftly to market needs, adapting new technologies quickly to
ensure customer satisfaction and loyalty.
Get To Know Struktol
Quick Guides
Intelligent Rubber Processing Additive Solutions
Opening A World Of New Opportunities
PR
OC
ES
SIN
G A
ND
DIS
PE
RS
ING
AG
EN
TS
Rubber AdditivesProduct Descriptions
Processing and Dispersing Agents
A 50A rubber soluble zinc soap of high molecular weight that provides a rapid physical peptization of natural rubber. It starts to be effective in the lower temperature range of compounding and can be used for mastication in a separate stage as well as for single stage mixing.
A 60A 60DH
A rubber soluble zinc soap leading to rapid physical peptization. It starts to be effective at lower mixing temperatures and can be used for mastication in a separate stage as well as for single stage mixing. A 60DH has a lower melting profile than A 60.
CY 50A recent addition to our line of processing and performance enhancing additives. It is designed for use in both natural & synthetic rubbers containing silica, improving both dispersion rate and silane reactivity.
EF 44A
A blend of fatty acid derivatives (predominantly zinc soaps) useful as a processing additive for a wide variety of rubbers with the exception of halogenated elastomers. It is particularly effective in highly reinforced black and silica compounds and is especially suited for high durometer extrusion.
EP 52A processing additive designed for use in EPDM, butyl, and halobutyl rubber compounds. It is a blend of rubber compatible non-hardening synthetic resins and fatty acid soaps, and is effective at improving extrusion uniformity and smoothing extrudates.
HPS 11* A zinc-free processing aid useful in both general and special purpose elastomers. It is designed to increase flow in filled compounds while promoting release to mixer rotors, mills, and calenders.
HT 207*A zinc-free processing aid especially designed for use with silica-filled elastomers. It improves extrusion rate, reduces hysteresis, and reduces mill roll sticking. It has a slight activation effect in sulfur-cured compounds.
HT 276
A recent addition to the Struktol product line. Designed for use in silica-filled compounds, it provides the maximum benefit in extrudate appearance. It is especially recommended for use in NR/silica compounds, providing viscosity reduction, scorch protection and dynamic property improvement.
HT 290A processing additive for fluorinated rubbers. It is silicone-free and provides improved flow and easier demolding. Its good lubricating properties provide an increased extrusion rate and lead to an improved appearance of the vulcanizate.
HT 600
A newly-developed high temperature organosilicone that combines outstanding processing with unique reactivity. It is for use in peroxide curable polymers like EPDM, EVM, HNBR, CM CSM or FPM to improve processing behavior and physical properties. May also be used as a partial replacement of co-agents.
HT 750 Recommended for the use in diamine cured Specialty Elastomers like Vamac, HT-ACM or HNBR in either carbon black and/or white filled compounds.
JV 46FDesigned to improve extrusion output and appearance in NR, SBR, SSBR, and EPDM compounds. Has a very high affinity for silica fillers and provides for maximum reduction of rolling resistance in high-performance silica tire treads.
RP 28 A nonstaining compatibilizing agent used primarily to blend dissimilar elastomers, including cured recycle. It improves mixing homogeneity and reduces filler incorporation time.
*Zinc-Free Additives
PR
OC
ES
SIN
G A
ND
DIS
PE
RS
ING
AG
EN
TS
Rubber AdditivesProduct Descriptions
For specific recommendations based on your polymer or process system contact us directly at (800) 327-8649 or (330) 928-5188
Email: [email protected]
www.struktol.comTEB0041A/2017
Processing and Dispersing Agents - continued
TR 251A complex oleochemical mixture containing mono and di amides and metal soap. It is a unique blend of anionic and ionic surfactants with lubricants, and is an effective dispersant and wetting agent in a variety of polymer systems.
W 34*A combination of zinc-free fatty acid derivatives. It is used as a filler dispersing agent in a wide range of polymers (NR, SBR, IIR, EPDM, CR, CSM, and ACM), and can be used in open mill production as well as production in internal mixers.
WA 48A highly effective processing aid mainly used for specialty polymers. It contains a combination of zinc soaps and fatty acid esters tailor-made for use in epichlorohydrin rubber (ECO) to improve flow properties and release.
WB 16*A zinc-free process aid designed to reduce viscosity and improve mold release in a wide variety of polymer systems; it improves mold release, especially when complicated mold designs are involved. It has a slight activating effect on the cure rate of sulfur-containing compounds.
WB 42*A zinc-free blend of fatty acid derivatives that provides internal as well as external lubrication in a wide range of elastomers, resulting in improved flow, cavity fill, mold release and extrusion. It does not affect peroxide cures.
WB 212*WB 222*
A blend of high molecular weight, aliphatic fatty acid esters and condensation products. These processing aids are zinc-free and are designed to improve processing with no reduction in cured properties.
WS 180A condensation product of fatty acid derivatives and silicones. This product leads to best results in the processing of specialty (e.g. ACM, ECO, FKM) elastomers. It has an extremely low peroxide demand and has practically no effect on physical properties.
WS 280
A processing additive based on organosilicones which are highly compatible with rubber compounds. It has extremely low volatility at high temperatures and is particularly suitable for FKM and silicone compounds. It offers better extrusion properties and is excellent for injection molding.
ZB 47
A proprietary zinc compound which promotes processing in filled rubber systems. It offers heat stability (reversion resistance) and improves dynamic properties in natural rubber compounds containing mineral fillers and silane coupling agents. It can improve tack and tack retention of high natural rubber compounds.
ZB 49
A recent addition to our product lineup. It is designed for use as a process additive in silica-filled compounds to both reduce viscosity and improve extrusion rate. It promotes the crosslinking reaction between polysulfide silane coupling agents and polymer, and has minimal effect on dynamic stiffness.
*Zinc-Free Additives
AC
TIV
AT
OR
S,
ME
TA
L O
XID
ES
, C
OA
TE
D S
UL
FU
RS
, H
OM
OG
EN
IZE
RS Rubber Additives
Product Descriptions
Activators
Activator 73 AActivator 73 LM
Multifunctional cure activators for the sulfur vulcanization of diene rubber, especially natural rubber. They can partly or totally replace conventional activators based on fatty acids (stearic acid, zinc stearate, and zinc 2-ethylhexanoate) and impart excellent reversion resistance. They can also be used as an effective physical peptizer for the mastication of natural rubber to improve processability in mixing, extrusion and molding. “LM” is designed for low shear and low temperature mixes.
ZEHZEH-DL
As a rubber soluble zinc soap, it is used instead of stearic acid and reduces stress relaxation and primary creep of NR-vulcanizates, especially in combination with soluble EV-systems. ZEH-DL is a free flowing powder; it offers processing advantages compared to the high viscosity of ZEH.
Zimag 29/43A A cross-linking agent consisting of a 2:3 ratio of zinc oxide to magnesium oxide for chloroprene compounds to reduce scorch.
Zinc Laurate Used as an activator for thiazoles, thiurams and dithiocarbamates by supplying fatty acid and soluble zinc.
Coated Metal Oxides
WB 700A Coated zinc oxide with 91% ZnO for natural and synthetic rubber compounds.
WB 900A Coated magnesium oxide with 75% MgO for natural and synthetic rubber compounds, especially for CR and CSM. Provides protection against humidity and carbon dioxide.
Coated Sulfurs
SU 95AFSU 109ASU 120ASU 135A
These coated sulfurs contain dispersing and wetting agents and can be used to enhance sulfur dispersion in any natural or synthetic rubber compound. They are active dispersions of oil treated sulfur at the following activities: SU 95AF = 95% (soluble), SU 109A = 75% (insoluble), SU 120A = 83% (soluble), SU 135A = 75% (½ soluble and ½ insoluble).
Homogenizing Agents
40 MS
This homogenizing agent is particularly effective with those elastomer blends that tend to crumble at the beginning of the mixing cycle. It is used to improve the homogeneity of elastomers of different polarity and viscosity. It also reduces mill bagging behavior, extrusion rates are increased without increasing die swell, and calendering properties are improved. Increases the green tack of many compounds although it is not strictly a tackifier.
HP 55
A lubricant/homogenizer combination which improves the mixing behavior of rubber compounds and promotes dispersion of reinforcing materials such as carbon black. Benefits have been found in the tire industry, particularly where solution SBR and NR are used.
MA
ND
RE
L R
EL
EA
SE
, P
EP
TIZ
ER
S,
SIL
AN
E C
OU
PL
ING
AG
EN
TS
Rubber AdditivesProduct Descriptions
For specific recommendations based on your polymer or process system contact us directly at (800) 327-8649 or (330) 928-5188
Email: [email protected]
www.struktol.comTEB0041B/2017
Mandrel Release
MR 187
A silicone free anti-tack agent (liquid, water soluble, mandrel release) and external lubricant for rubber processing. It has been especially designed for EPDM hoses, both peroxide and sulfur cross-linked, but can also be used successfully as a lubricant for cured rubber articles. It is biodegradable.
Peptizers
A 80A 82A 86
These are used as a combination peptizing and processing additive and are effective in both natural and synthetic rubber. A 80 and A 82 are easily dispersed in rubber due to their high concentration of dispersing agent. A 86 contains more active substance and can therefore be used at lower dosages.
A 91F A mixture of zinc soaps of high molecular weight fatty acids used to reduce viscosity in NR and SBR.
HT 105A
A non-discoloring multifunctional additive used as a mild mastication additive. It combines both chemical and physical peptizing functionality. This additive favors the breakdown of high molecular weight chains alone, resulting in more uniform molecular weight distribution and better dynamic vulcanizate properties.
Silane Coupling Agents
Silane Coupling Agents
These materials provide coupling of most non-black fillers to the polymer backbone allowing for: improved abrasion resistance, higher compound modulus, lower hysteresis, improved compression set, and in tire tread compounds improved rolling resistance. (See Silane Coupling Agents guide for details.)
PL
AS
TIC
IZE
RS
, P
E W
AX
, S
LA
B D
IP,
SL
IP A
GE
NT
SRubber Additives
Product Descriptions
Plasticizers
AW 1An antistatic plasticizer for mineral filled NBR, SBR, and NR compounds. A surface resistance as low as 1 x 106 Ohms can be achieved in NBR vulcanizates.
KW 400An easily soluble plasticizer used to improve the low temperature flexibility of all commonly used rubbers. NBR vulcanizates can be compounded to provide flexibility at temperatures as low as -55°C.
KW 600 A plasticizer with extremely low pour point offering excellent low temperature flexibility.
KW 800 Halogen-free phosphate ester plasticizer with excellent low temperature flexibility and flame retardant properties.
WB 300Used in NBR, ECO, and ACM to improve oil and fuel resistance. Due to its incompatibility with aliphatic hydrocarbons, mineral oils and greases, it will not leach from vulcanizates and thus minimizes hardening and shrinkage.
Polyethylene Wax
PEH-100Low molecular weight polyethylene wax used in both natural and synthetic elastomers. It improves flow and processability, promotes release from hot metals, and improves pigment dispersion.
Slab Dip
AntiadherenteA mixture of insoluble and soluble soaps with dispersing agents. It is a batch-off slab lubricant designed for use in the rubber industry. The formulation is made without any inorganic fillers.
Slip Agents (Amides)
TR 121TR 131
TR 141*
These unsaturated fatty primary amides function by migrating to the surface in a microscopic coating which reduces the coefficient of friction. TR 121 (oleamide) migrates more rapidly than TR 131 (erucamide) but has reduced heat stability. They function as both a lubricant and mold release agent and their low odor make them extremely suitable for food contact applications. *For peroxide cure systems, use TR 141.
TA
CK
IFIE
RS
, O
DO
R C
ON
TR
OL
Rubber AdditivesProduct Descriptions
For specific recommendations based on your polymer or process system contact us directly at (800) 327-8649 or (330) 928-5188
Email: [email protected]
www.struktol.comTEB0041C/2017
Tackifiers
Koresin (BASF)
This product can be used as a high performance tackifier for natural and synthetic elastomers for improving long term building tack in compounds and cements.
TS 30TS 35TS 50
These products are resinous plasticizers which significantly increase the low green tack of synthetic rubber compounds. The “DL” forms are free-flowing powders that offer improved handling over high viscosity products. TS 50 is especially suitable for EPDM compounds to improve the tack of “dry” highly loaded compounds.
Strukrez 110
A hydrocarbon resin that improves the homogeneity of elastomers of different polarity and viscosity. They are rapidly absorbed by the polymers during the mixing cycle. A relatively low viscosity mass is quickly achieved into which other compounding ingredients can easily be incorporated.
Odor Control
RP 17
May be added during compounding, extrusion or molding to eliminate or mask undesirable odors often associated with the addition of recycle streams or other ingredients used in compounding. At low dosages it tends to neutralize odor while at higher dosages it will impart a fresh “clean” odor to the rubber compound.
TEB0041D/2018
Struktol Company of America, Stow, OH • www.struktol.com • [email protected]
General Recommendations
General Purpose Mill Mixing Milling &
Calendering Compression &
Transfer Injection Molding
AEM HPS 11
W 34 NS NS NS NS
Butyl
40 MS A 50 / A 60
EP 52 HPS 11 WB 16
A 50 / A 60
HPS 11 WB 16
HPS 11 WB 16
HPS 11 WB 16
HPS 11 WB 16
CPE WB 222 HPS 11
WB 222 HPS 11
WB 222 HPS 11
HPS 11 WB 222
HPS 11 WB 222
Chloroprene HPS 11 WB 42
WB 222 HPS 11
WB 42
HPS 11 WB 222
HPS 11 WB 222
HPS 11 WB 222
CSM WB 222 HPS 11
WB 222 HPS 11
WB 222 HPS 11
WB 222 HPS 11
WB 222 HPS 11
E-SBR and Blends
JV 46F EF 44 A A 50 / A 60
JV 46F EF 44 A WB 212
JV 46F HPS 11 WB 212
JV 46F HPS 11 WB 212
JV 46F HPS 11 WB 212
ECO WA 48
HPS 11
A 50 / A 60
WA 48
WA 48
HPS 11
WB 222
WA 48
WB 222
WA 48
EPDM (Sulfur)
EP 52 JV 46F A 50 / A 60 WB 42 WB 16
JV 46F
A 50 / A 60 WB 16 WB 42
A 50 / A 60
WB 16 HPS 11 JV 46F
WB 16 JV 46F WB 42 HPS 11 A 50 / A 60
WB 16 JV 46F WB 42 HPS 11 A 50 / A 60
EPM/EPDM (Peroxide)
HPS 11 WB 42 WB 16
HT 600
HPS 11 WB 42 WB 16
HT 600
HPS 11 WB 16 WB 42
HT 600
HPS 11 WB 42 WB 16
HT 600
HPS 11 WB 42 WB 16
HT 600
EVA/EVM TR 251 WB 16 RP 28
TR 251 TR 251 TR 251 TR 251
FKM WS 280 HT 290 WB 222
NS NS NS NS
FVMQ WS 280 HT 290
NS NS NS NS
Halobutyl 40 MS EP 52 HPS 11
HPS 11
WB 16
HPS 11
WB 16
HPS 11
WB 16
HPS 11
WB 16
NBR
HPS 11
WA 48 WB 222 WB 212
HPS 11 WB 222 WB 42 WA 48 WB 300
HPS 11 WB 222 WB 212 WA 48 WB 300
HPS 11 WA 48 WB 212
HPS 11 WA 48 WB 212
TEB0041D/2018
Struktol Company of America, Stow, OH • www.struktol.com • [email protected]
General Recommendations - continued
General Purpose Mill Mixing
Milling & Calendering
Compression & Transfer
Injection Molding
NR
CY 50
ZB 49 JV 46F EF 44 A ZB 47 A 50 / A 60 Activator 73 A
CY 50 ZB 49 JV 46F
A 50 / A 60 ZB 47 EF 44 A
CY 50 ZB 49 JV 46F
A 50 / A 60 ZB 47 EF 44 A
CY 50 ZB 49 JV 46F
A 50 / A 60 ZB 47 EF 44 A
CY 50 ZB 49 JV 46F
A 50 / A 60 ZB 47 EF 44 A
NR (Blends with
SBR or BR)
CY 50 ZB 49 JV 46F A 50 / A 60 HPS 11 EF 44 A
CY 50 ZB 49 JV 46F EF 44 A A 50 / A 60 Activator 73LM
CY 50 ZB 49 JV 46F EF 44 A
HP 55 A 50 / A 60 40 MS
JV 46F EF 44 A A 50 / A 60 Activator 73 A
JV 46F EF 44 A A 50 / A 60 Activator 73 A
Polyacrylate HPS 11 WS 280
WS 280 HPS 11
HPS 11 WS 280
HPS 11 WS 280
HPS 11 WB 222
SBR (Mineral)
ZB 49
JV 46F EF 44 A A 50 / A 60
W 34
ZB 49 JV 46F EF 44 A A 50 / A 60
ZB 49 JV 46F EF 44 A A 50 / A 60
ZB 49 JV 46F EF 44 A A 50 / A60
JV 46F EF 44 A A 50 / A 60
S-SBR and Blends
ZB 49
JV 46F EF 44 A A 50 / A 60
ZB 49 JV 46F EF 44 A Activator 73 A WB 16
ZB 49 JV 46F EF 44 A HP 55 HPS 11 WB 16
40 MS
ZB 49 JV 46F EF 44 A HP 55 HPS 11 WB 16
40 MS
ZB 49 JV 46F EF 44 A HP 55 HPS 11 WB 16
40 MS
Urethane (Millable)
WB 222 NS NS NS NS
XNBR, HNBR
WB 222 WB 212 WS 280
WB 222 WB 212 WS 280
WB 222 WB 212 WS 280
WB 222
WB 222 WS 280
Items listed in BOLD are primary recommendations; others are alternatives.
Dosage: We recommend 2% of total batch weight as a starting point.
Please refer to the technical data sheet for specifics.
Improved Flow
Reduce Mold Fouling
Mold Release / Mill Sticking
Blending Polymers of Different Viscosities
Reversion Resistance NS Not Studied
Economic
Struktol AdditivesProduct Overview
• Activators
• Coated Metal Oxides
• Coated Sulfur
• Dispersing Agents
• Homogenizing Agents
• Mandrel Release
• Peptizers
• Plasticizers
• Polyethylene Waxes
• Processing Agents
• Silane Coupling Agents
• Slab Dips
• Slip Agents (Amides)
• Specialty Polymers
• Tackifying Resins
Struktol Company of America201 E. Steels Corners RoadP.O. Box 1649Stow, OH 44224-0649330-928-5188800-327-8649Fax: 330-928-0013Email: [email protected]
Struktol Company of America is a member of the Schill & Seilacher family of companies, with representation in
over 100 countries around the world. A global organization with over a century of specialty chemical expertise,
Schill & Seilacher markets most of their polymer processing products under the brand name STRUKTOL® – a name
that has become synonymous with both quality and performance. Struktol manufactures chemicals for the plastics
and rubber industry, foam inhibitors, polydispersions, silicone emulsions, products used in latex processing, and
POLYDIS®, a line of epoxy prepolymers and flame retardants.
The Struktol approach to the rubber and plastic additives business is by no means typical or ordinary. Chemistry
is at the heart of everything we do. Providing Intelligent Additive Solutions, Struktol products are designed to
meet the challenges and exacting demands of our customers. Our technical specialists, R&D chemists and
compound laboratory are dedicated to creating innovative solutions for the ever-changing polymer industry –
solutions that keep you ahead of your competition with increased productivity, better quality parts and lower
overall cost. In addition to premium product performance, Struktol Customer Service initiatives have become
the industry benchmark.
Struktol Company of America
www.struktol.com
TEB0041/2017
Struktol’s vast polymer additive experience is translated into the most intelligent
solutions available anywhere. Each of our additives are tested and retested to
insure maximum product quality and performance consistency.
Struktol manufactures a complete line of additives that function individually
or in combination in both natural and synthetic rubber. By providing a full
range of material-enhancing products, i.e. dispersants, homogenizers,
lubricants, peptizers, plasticizers and tackifiers, the incorporation of Struktol
additives can significantly improve processability for all stages of rubber
production. We are a flexible innovation partner, producing our additives
in accordance with the demanding specifications of our customers and
reacting swiftly to market needs, adapting new technologies quickly to
ensure customer satisfaction and loyalty.
Get To Know Struktol
Quick Guides
Intelligent Rubber Processing Additive Solutions
Opening A World Of New Opportunities
